Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_crc.c

Revision:

394:83f921546702

Parent:

393:17d2d502961d

Child:

395:bfce16e86ea4

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_hal_crc.c	Fri Nov 07 12:00:11 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,339 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32l1xx_hal_crc.c
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    5-September-2014
-  * @brief   CRC HAL module driver.
-  *          This file provides firmware functions to manage the following 
-  *          functionalities of the Cyclic Redundancy Check (CRC) peripheral:
-  *           + Initialization and de-initialization functions
-  *           + Peripheral Control functions 
-  *           + Peripheral State functions
-  *
-  @verbatim
-  ==============================================================================
-                     ##### How to use this driver #####
-  ==============================================================================
-    [..]
-      The CRC HAL driver can be used as follows:
-
-      (#) Enable CRC AHB clock using __CRC_CLK_ENABLE();
-
-      (#) Use HAL_CRC_Accumulate() function to compute the CRC value of 
-          a 32-bit data buffer using combination of the previous CRC value
-          and the new one.
-
-      (#) Use HAL_CRC_Calculate() function to compute the CRC Value of 
-          a new 32-bit data buffer. This function resets the CRC computation  
-          unit before starting the computation to avoid getting wrong CRC values.
-
-  @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l1xx_hal.h"
-
-/** @addtogroup STM32L1xx_HAL_Driver
-  * @{
-  */
-
-/** @defgroup CRC CRC
-  * @brief CRC HAL module driver.
-  * @{
-  */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup CRC_Exported_Functions CRC Exported Functions
-  * @{
-  */
-
-/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions 
- *  @brief    Initialization and Configuration functions. 
- *
-@verbatim    
-  ==============================================================================
-            ##### Initialization and de-initialization functions #####
-  ==============================================================================
-    [..]  This section provides functions allowing to:
-      (+) Initialize the CRC according to the specified parameters 
-          in the CRC_InitTypeDef and create the associated handle
-      (+) DeInitialize the CRC peripheral
-      (+) Initialize the CRC MSP
-      (+) DeInitialize CRC MSP 
- 
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Initializes the CRC according to the specified
-  *         parameters in the CRC_InitTypeDef and creates the associated handle.
-  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
-  *         the configuration information for CRC
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)
-{
-  /* Check the CRC handle allocation */
-  if(hcrc == HAL_NULL)
-  {
-    return HAL_ERROR;
-  }
-
-  /* Check the parameters */
-  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
-
-  if(hcrc->State == HAL_CRC_STATE_RESET)
-  {
-    /* Init the low level hardware */
-    HAL_CRC_MspInit(hcrc);
-  }
-  
-  /* Change CRC peripheral state */
-  hcrc->State = HAL_CRC_STATE_BUSY;
-   
-  /* Change CRC peripheral state */
-  hcrc->State = HAL_CRC_STATE_READY;
-  
-  /* Return function status */
-  return HAL_OK;
-}
-
-/**
-  * @brief  DeInitializes the CRC peripheral.
-  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
-  *         the configuration information for CRC
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)
-{
-  /* Check the CRC handle allocation */
-  if(hcrc == HAL_NULL)
-  {
-    return HAL_ERROR;
-  }
-
-  /* Check the parameters */
-  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
-
-  /* Change CRC peripheral state */
-  hcrc->State = HAL_CRC_STATE_BUSY;
-
-  /* DeInit the low level hardware */
-  HAL_CRC_MspDeInit(hcrc);
-
-  /* Change CRC peripheral state */
-  hcrc->State = HAL_CRC_STATE_RESET;
-
-  /* Release Lock */
-  __HAL_UNLOCK(hcrc);
-
-  /* Return function status */
-  return HAL_OK;
-}
-
-/**
-  * @brief  Initializes the CRC MSP.
-  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
-  *         the configuration information for CRC
-  * @retval None
-  */
-__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)
-{
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_CRC_MspInit could be implemented in the user file
-   */
-}
-
-/**
-  * @brief  DeInitializes the CRC MSP.
-  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
-  *         the configuration information for CRC
-  * @retval None
-  */
-__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)
-{
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_CRC_MspDeInit could be implemented in the user file
-   */
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions 
- *  @brief    management functions. 
- *
-@verbatim   
-  ==============================================================================
-                      ##### Peripheral Control functions #####
-  ==============================================================================  
-    [..]  This section provides functions allowing to:
-      (+) Compute the 32-bit CRC value of 32-bit data buffer,
-          using combination of the previous CRC value and the new one.
-      (+) Compute the 32-bit CRC value of 32-bit data buffer,
-          independently of the previous CRC value.
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Computes the 32-bit CRC of 32-bit data buffer using combination
-  *         of the previous CRC value and the new one.
-  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
-  *         the configuration information for CRC
-  * @param  pBuffer: pointer to the buffer containing the data to be computed
-  * @param  BufferLength: length of the buffer to be computed (defined in word, 4 bytes)
-  * @retval 32-bit CRC
-  */
-uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
-{
-  uint32_t index = 0;
-
-  /* Process Locked */
-  __HAL_LOCK(hcrc);
-
-  /* Change CRC peripheral state */
-  hcrc->State = HAL_CRC_STATE_BUSY;
-
-  /* Enter Data to the CRC calculator */
-  for(index = 0; index < BufferLength; index++)
-  {
-    hcrc->Instance->DR = pBuffer[index];
-  }
-
-  /* Change CRC peripheral state */
-  hcrc->State = HAL_CRC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hcrc);
-
-  /* Return the CRC computed value */
-  return hcrc->Instance->DR;
-}
-
-/**
-  * @brief  Computes the 32-bit CRC of 32-bit data buffer independently
-  *         of the previous CRC value.
-  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
-  *         the configuration information for CRC
-  * @param  pBuffer: Pointer to the buffer containing the data to be computed
-  * @param  BufferLength: Length of the buffer to be computed (defined in word, 4 bytes)
-  * @retval 32-bit CRC
-  */
-uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
-{
-  uint32_t index = 0;
-
-  /* Process Locked */
-  __HAL_LOCK(hcrc); 
-
-  /* Change CRC peripheral state */
-  hcrc->State = HAL_CRC_STATE_BUSY;
-
-  /* Reset CRC Calculation Unit */
-  __HAL_CRC_DR_RESET(hcrc);
-
-  /* Enter Data to the CRC calculator */
-  for(index = 0; index < BufferLength; index++)
-  {
-    hcrc->Instance->DR = pBuffer[index];
-  }
-
-  /* Change CRC peripheral state */
-  hcrc->State = HAL_CRC_STATE_READY;
-
-  /* Process Unlocked */
-  __HAL_UNLOCK(hcrc);
-
-  /* Return the CRC computed value */
-  return hcrc->Instance->DR;
-}
-
-/**
-  * @}
-  */
-
-/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions 
- *  @brief    Peripheral State functions. 
- *
-@verbatim   
-  ==============================================================================
-                      ##### Peripheral State functions #####
-  ==============================================================================  
-    [..]
-    This subsection permits to get in run-time the status of the peripheral 
-    and the data flow.
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Returns the CRC state.
-  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains
-  *         the configuration information for CRC
-  * @retval HAL state
-  */
-HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
-{
-  return hcrc->State;
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* HAL_CRC_MODULE_ENABLED */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/