Benoît Locher / mbedNet

Rewrite from scratch a TCP/IP stack for mbed. So far the following parts are usable: Drivers: - EMAC driver (from CMSIS 2.0) Protocols: - Ethernet protocol - ARP over ethernet for IPv4 - IPv4 over Ethernet - ICMPv4 over IPv4 - UDPv4 over IPv4 APIs: - Sockets for UDPv4 The structure of this stack is designed to be very modular. Each protocol can register one or more protocol to handle its payload, and in each protocol, an API can be hooked (like Sockets for example). This is an early release.

lpc17xx_libcfg_default.h

Committer:
Benoit
Date:
2011-06-26
Revision:
7:8e12f7357b9f
Parent:
5:3cd83fcb1467

File content as of revision 7:8e12f7357b9f:

/* @cond */
/***********************************************************************//**
 * @file		lpc17xx_libcfg_default.h
 * @brief		Default Library configuration header file
 * @version		2.0
 * @date		21. May. 2010
 * @author		NXP MCU SW Application Team
 **************************************************************************
 * Software that is described herein is for illustrative purposes only
 * which provides customers with programming information regarding the
 * products. This software is supplied "AS IS" without any warranties.
 * NXP Semiconductors assumes no responsibility or liability for the
 * use of the software, conveys no license or title under any patent,
 * copyright, or mask work right to the product. NXP Semiconductors
 * reserves the right to make changes in the software without
 * notification. NXP Semiconductors also make no representation or
 * warranty that such application will be suitable for the specified
 * use without further testing or modification.
 **************************************************************************/

/* Library Configuration group ----------------------------------------------------------- */
/** @defgroup LIBCFG_DEFAULT LIBCFG_DEFAULT
 * @ingroup LPC1700CMSIS_FwLib_Drivers
 * @{
 */

#ifndef LPC17XX_LIBCFG_DEFAULT_H_
#define LPC17XX_LIBCFG_DEFAULT_H_

/* Includes ------------------------------------------------------------------- */
#include "lpc_types.h"


/* Public Macros -------------------------------------------------------------- */
/** @defgroup LIBCFG_DEFAULT_Public_Macros LIBCFG_DEFAULT Public Macros
 * @{
 */

/************************** DEBUG MODE DEFINITIONS *********************************/
/* Un-comment the line below to compile the library in DEBUG mode, this will expanse
   the "CHECK_PARAM" macro in the FW library code */

//#define DEBUG


/******************* PERIPHERAL FW LIBRARY CONFIGURATION DEFINITIONS ***********************/
/* Comment the line below to disable the specific peripheral inclusion */

/* DEBUG_FRAMWORK ------------------------------ */
#define _DBGFWK

/* GPIO ------------------------------- */
#define _GPIO

/* EXTI ------------------------------- */
#define _EXTI

/* UART ------------------------------- */
#define _UART
#define _UART0
#define _UART1
#define _UART2
#define _UART3

/* SPI ------------------------------- */
#define _SPI

/* SYSTICK --------------------------- */
#define _SYSTICK

/* SSP ------------------------------- */
#define _SSP
#define _SSP0
#define _SSP1


/* I2C ------------------------------- */
#define _I2C
#define _I2C0
#define _I2C1
#define _I2C2

/* TIMER ------------------------------- */
#define _TIM

/* WDT ------------------------------- */
#define _WDT


/* GPDMA ------------------------------- */
#define _GPDMA


/* DAC ------------------------------- */
#define _DAC

/* DAC ------------------------------- */
#define _ADC


/* PWM ------------------------------- */
#define _PWM
#define _PWM1

/* RTC ------------------------------- */
#define _RTC

/* I2S ------------------------------- */
#define _I2S

/* USB device ------------------------------- */
#define _USBDEV
#define _USB_DMA

/* QEI ------------------------------- */
#define _QEI

/* MCPWM ------------------------------- */
#define _MCPWM

/* CAN--------------------------------*/
#define _CAN

/* RIT ------------------------------- */
#define _RIT

/* EMAC ------------------------------ */
#define _EMAC

/************************** GLOBAL/PUBLIC MACRO DEFINITIONS *********************************/

#ifdef  DEBUG
/*******************************************************************************
* @brief		The CHECK_PARAM macro is used for function's parameters check.
* 				It is used only if the library is compiled in DEBUG mode.
* @param[in]	expr - If expr is false, it calls check_failed() function
*                    	which reports the name of the source file and the source
*                    	line number of the call that failed.
*                    - If expr is true, it returns no value.
* @return		None
*******************************************************************************/
#define CHECK_PARAM(expr) ((expr) ? (void)0 : check_failed((uint8_t *)__FILE__, __LINE__))
#else
#define CHECK_PARAM(expr)
#endif /* DEBUG */

/**
 * @}
 */


/* Public Functions ----------------------------------------------------------- */
/** @defgroup LIBCFG_DEFAULT_Public_Functions LIBCFG_DEFAULT Public Functions
 * @{
 */

#ifdef  DEBUG
void check_failed(uint8_t *file, uint32_t line);
#endif

/**
 * @}
 */

#endif /* LPC17XX_LIBCFG_DEFAULT_H_ */

/**
 * @}
 */

/* --------------------------------- End Of File ------------------------------ */
/* @endcond */