MODSERIAL
Dependents of MODSERIAL
A dependent is a program or library which makes use of this library.
Tracks GPS coordinates of an asset. Uses: GPS GSM Accelerometer mbed
anti-theft,
GPS,
GSM,
MODGPS,
MODSERIAL
Program for receiving XBee packets and controlling the MoboRobo.
Program for Sending an XBee packet from the controller to the MoboRobo.
This is the code we used in our final implementation of our spherical robot.
Test for LinkSprite Y201 JPEG camera
Serial UART snooper. Connect RX and TX of the UUT to 2 x RX pins on mbed to inspect the traffic in both directions
AHRS library, modified version of Peter Bartz work.
Georgia Tech ECE 4180 Final Project
Trying to log data from UM6 sensor with GPS receiver LS20031. I have two problems: - I can't log to file at a fast rate (<0.5s) without data values freezing …
GPS,
logging,
LS20031,
orientation,
UM6
Capstone project for Bachelor's in Mechanical Engineering 2011
its a template, it uses public code
OV7670 + 23LC1024 + Bluetooth
Test Code for OV7670 Camera module with FIFO AL422
OV7670
this version has all of Jim's fixes for reading the GPS and IMU data synchronously
Project for PWM synchronized by GPS
ok
UM6 on AirBearing
Read GCODE from a laptop and parse it into usable structures.
rosserial for Hydro
Small project to display some OBD values from the Toyota GT86/ Subaru BRZ/ Scion FRS on an OLED display.
Swimate V2 without RTOS code
voor willem test
Check this one ! mbos setup changed, WTX hor pos changed, no font style check, no checksum check
replaces CDU_Mbed_26
An example Program for the SimpleSerialProtocol Library, This program will receive a packet, then echo it back to the client
example,
SimpleSerialProtocol
An example program for SerialFileTransfer, receives files from a java application and stores them on the LocalFileSystem
example,
file,
Serial,
SerialFileTransfer,
transfer
New work version with additional functions
Modifications in 4DGL library. Added CDU_hw_sw.h for version info. Added pins.h for hardware pin remapping
Ika Shouyu Poppoyaki - LPC82x supported
mbed serial interface for the OV528 camera (uCAM TTL 120 from 4D systems).
camera,
JPEG,
OV528,
uCAM TTL120
Initial commit