Diff: FatFileSystem/ffconf.h

Revision:

1:c7958aa34fa1

Parent:

0:616601bde9fb

--- a/FatFileSystem/ffconf.h	Thu Feb 23 21:38:39 2012 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,190 +0,0 @@
-/*---------------------------------------------------------------------------/
-/  FatFs - FAT file system module configuration file  R0.09  (C)ChaN, 2011
-/----------------------------------------------------------------------------/
-/
-/ CAUTION! Do not forget to make clean the project after any changes to
-/ the configuration options.
-/
-/----------------------------------------------------------------------------*/
-#ifndef _FFCONF
-#define _FFCONF 6502	/* Revision ID */
-
-
-/*---------------------------------------------------------------------------/
-/ Functions and Buffer Configurations
-/----------------------------------------------------------------------------*/
-
-#define	_FS_TINY		0	/* 0:Normal or 1:Tiny */
-/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
-/  object instead of the sector buffer in the individual file object for file
-/  data transfer. This reduces memory consumption 512 bytes each file object. */
-
-
-#define _FS_READONLY	0	/* 0:Read/Write or 1:Read only */
-/* Setting _FS_READONLY to 1 defines read only configuration. This removes
-/  writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
-/  f_truncate and useless f_getfree. */
-
-
-#define _FS_MINIMIZE	0	/* 0 to 3 */
-/* The _FS_MINIMIZE option defines minimization level to remove some functions.
-/
-/   0: Full function.
-/   1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename
-/      are removed.
-/   2: f_opendir and f_readdir are removed in addition to 1.
-/   3: f_lseek is removed in addition to 2. */
-
-
-#define	_USE_STRFUNC	0	/* 0:Disable or 1-2:Enable */
-/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
-
-
-#define	_USE_MKFS		1	/* 0:Disable or 1:Enable */
-/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
-
-
-#define	_USE_FORWARD	0	/* 0:Disable or 1:Enable */
-/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
-
-
-#define	_USE_FASTSEEK	0	/* 0:Disable or 1:Enable */
-/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Locale and Namespace Configurations
-/----------------------------------------------------------------------------*/
-
-#define _CODE_PAGE	858
-/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
-/  Incorrect setting of the code page can cause a file open failure.
-/
-/   932  - Japanese Shift-JIS (DBCS, OEM, Windows)
-/   936  - Simplified Chinese GBK (DBCS, OEM, Windows)
-/   949  - Korean (DBCS, OEM, Windows)
-/   950  - Traditional Chinese Big5 (DBCS, OEM, Windows)
-/   1250 - Central Europe (Windows)
-/   1251 - Cyrillic (Windows)
-/   1252 - Latin 1 (Windows)
-/   1253 - Greek (Windows)
-/   1254 - Turkish (Windows)
-/   1255 - Hebrew (Windows)
-/   1256 - Arabic (Windows)
-/   1257 - Baltic (Windows)
-/   1258 - Vietnam (OEM, Windows)
-/   437  - U.S. (OEM)
-/   720  - Arabic (OEM)
-/   737  - Greek (OEM)
-/   775  - Baltic (OEM)
-/   850  - Multilingual Latin 1 (OEM)
-/   858  - Multilingual Latin 1 + Euro (OEM)
-/   852  - Latin 2 (OEM)
-/   855  - Cyrillic (OEM)
-/   866  - Russian (OEM)
-/   857  - Turkish (OEM)
-/   862  - Hebrew (OEM)
-/   874  - Thai (OEM, Windows)
-/	1    - ASCII only (Valid for non LFN cfg.)
-*/
-
-
-#define	_USE_LFN	1		/* 0 to 3 */
-#define	_MAX_LFN	255		/* Maximum LFN length to handle (12 to 255) */
-/* The _USE_LFN option switches the LFN support.
-/
-/   0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect.
-/   1: Enable LFN with static working buffer on the BSS. Always NOT reentrant.
-/   2: Enable LFN with dynamic working buffer on the STACK.
-/   3: Enable LFN with dynamic working buffer on the HEAP.
-/
-/  The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN,
-/  Unicode handling functions ff_convert() and ff_wtoupper() must be added
-/  to the project. When enable to use heap, memory control functions
-/  ff_memalloc() and ff_memfree() must be added to the project. */
-
-
-#define	_LFN_UNICODE	0	/* 0:ANSI/OEM or 1:Unicode */
-/* To switch the character code set on FatFs API to Unicode,
-/  enable LFN feature and set _LFN_UNICODE to 1. */
-
-
-#define _FS_RPATH		0	/* 0 to 2 */
-/* The _FS_RPATH option configures relative path feature.
-/
-/   0: Disable relative path feature and remove related functions.
-/   1: Enable relative path. f_chdrive() and f_chdir() are available.
-/   2: f_getcwd() is available in addition to 1.
-/
-/  Note that output of the f_readdir fnction is affected by this option. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Physical Drive Configurations
-/----------------------------------------------------------------------------*/
-
-#define _VOLUMES	4
-/* Number of volumes (logical drives) to be used. */
-
-
-#define	_MAX_SS		512		/* 512, 1024, 2048 or 4096 */
-/* Maximum sector size to be handled.
-/  Always set 512 for memory card and hard disk but a larger value may be
-/  required for on-board flash memory, floppy disk and optical disk.
-/  When _MAX_SS is larger than 512, it configures FatFs to variable sector size
-/  and GET_SECTOR_SIZE command must be implememted to the disk_ioctl function. */
-
-
-#define	_MULTI_PARTITION	0	/* 0:Single partition, 1/2:Enable multiple partition */
-/* When set to 0, each volume is bound to the same physical drive number and
-/ it can mount only first primaly partition. When it is set to 1, each volume
-/ is tied to the partitions listed in VolToPart[]. */
-
-
-#define	_USE_ERASE	0	/* 0:Disable or 1:Enable */
-/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command
-/  should be added to the disk_ioctl functio. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ System Configurations
-/----------------------------------------------------------------------------*/
-
-#define _WORD_ACCESS	0	/* 0 or 1 */
-/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS
-/  option defines which access method is used to the word data on the FAT volume.
-/
-/   0: Byte-by-byte access.
-/   1: Word access. Do not choose this unless following condition is met.
-/
-/  When the byte order on the memory is big-endian or address miss-aligned word
-/  access results incorrect behavior, the _WORD_ACCESS must be set to 0.
-/  If it is not the case, the value can also be set to 1 to improve the
-/  performance and code size.
-*/
-
-
-/* A header file that defines sync object types on the O/S, such as
-/  windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */
-
-#define _FS_REENTRANT	0		/* 0:Disable or 1:Enable */
-#define _FS_TIMEOUT		1000	/* Timeout period in unit of time ticks */
-#define	_SYNC_t			HANDLE	/* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
-
-/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module.
-/
-/   0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect.
-/   1: Enable reentrancy. Also user provided synchronization handlers,
-/      ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj
-/      function must be added to the project. */
-
-
-#define	_FS_SHARE	0	/* 0:Disable or >=1:Enable */
-/* To enable file shareing feature, set _FS_SHARE to 1 or greater. The value
-   defines how many files can be opened simultaneously. */
-
-
-#endif /* _FFCONFIG */