u-blox
Implementation of the CellularInterface for u-blox C027 and C030 (non-N2xx flavour) modems that uses the IP stack on-board the cellular modem, hence not requiring LWIP (and so less RAM) and allowing any AT command exchanges to be carried out at the same time as data transfers (since the modem remains in AT mode all the time). This library may be used from mbed 5.5 onwards. If you need to use SMS, USSD or access the modem file system at the same time as using the CellularInterface then use ublox-at-cellular-interface-ext instead.
Dependents: example-ublox-cellular-interface example-ublox-cellular-interface_r410M example-ublox-mbed-client example-ublox-cellular-interface ... more
Diff: UbloxATCellularInterface.h
- Revision:
- 17:7b033423126c
- Parent:
- 16:2b30a056ae54
- Child:
- 24:35d5b2a02df8
--- a/UbloxATCellularInterface.h Tue Oct 30 18:15:09 2018 +0000
+++ b/UbloxATCellularInterface.h Thu Jan 17 18:55:41 2019 +0500
@@ -255,6 +255,12 @@
*/
void connection_status_cb(Callback<void(nsapi_error_t)> cb);
+ /** Set the plmn. PLMN controls to what network device registers.
+ *
+ * @param plmn user to force what network to register.
+ */
+ virtual void set_plmn(const char *plmn);
+
protected:
/** Socket "unused" value.