test
mbed library sources
Fork of
mbed-src
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hcd.c
- Revision:
- 87:085cde657901
- Child:
- 106:ced8cbb51063
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hcd.c Sat Feb 08 19:45:06 2014 +0000
@@ -0,0 +1,1177 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hcd.c
+ * @author MCD Application Team
+ * @version V1.0.0RC2
+ * @date 04-February-2014
+ * @brief HCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#)Declare a HCD_HandleTypeDef handle structure, for example:
+ HCD_HandleTypeDef hhcd;
+
+ (#)Fill parameters of Init structure in HCD handle
+
+ (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...)
+
+ (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API:
+ (##) Enable the HCD/USB Low Level interface clock using
+ (+++) __OTGFS-OTG_CLK_ENABLE()/__OTGHS-OTG_CLK_ENABLE();
+ (+++) __OTGHSULPI_CLK_ENABLE(); (For High Speed Mode)
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure HCD pin-out
+ (##) Configure HCD NVIC interrupt
+
+ (#)Associate the Upper USB Host stack to the HAL HCD Driver:
+ (##) hhcd.pData = phost;
+
+ (#)Enable HCD transmission and reception:
+ (##) HAL_HCD_Start();
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HCD
+ * @brief HCD HAL module driver
+ * @{
+ */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void HAL_HCD_HC_IN_IRQHandler (HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HAL_HCD_HC_OUT_IRQHandler (HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HAL_HCD_RXQLVL_IRQHandler (HCD_HandleTypeDef *hhcd);
+static void HAL_HCD_Port_IRQHandler (HCD_HandleTypeDef *hhcd);
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HCD_Private_Functions
+ * @{
+ */
+
+/** @defgroup HCD_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the host driver
+ * @param hhcd : HCD handle
+ * @retval HAL state
+ */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd)
+{
+ /* Check the HCD handle allocation */
+ if(hhcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance));
+
+ hhcd->State = HCD_BUSY;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_HCD_MspInit(hhcd);
+
+ /* Disable the Interrupts */
+ __HAL_HCD_DISABLE(hhcd);
+
+ /*Init the Core (common init.) */
+ USB_CoreInit(hhcd->Instance, hhcd->Init);
+
+ /* Force Host Mode*/
+ USB_SetCurrentMode(hhcd->Instance , USB_OTG_HOST_MODE);
+
+ /* Init Host */
+ USB_HostInit(hhcd->Instance, hhcd->Init);
+
+ hhcd->State= HCD_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize a host channel
+ * @param hhcd : HCD handle
+ * @param ch_num : Channel number
+ * This parameter can be a value from 1 to 15
+ * @param epnum : Endpoint number
+ * This parameter can be a value from 1 to 15
+ * @param dev_address : Current device address
+ * This parameter can be a value from 0 to 255
+ * @param speed : Current device speed
+ * This parameter can be one of the these values:
+ * @arg HCD_SPEED_HIGH: High speed mode
+ * @arg HCD_SPEED_FULL: Full speed mode
+ * @arg HCD_SPEED_LOW: Low speed mode
+ * @param ep_type : Endpoint Type
+ * This parameter can be one of the these values:
+ * @arg EP_TYPE_CTRL: Control type
+ * @arg EP_TYPE_ISOC: Isochrounous type
+ * @arg EP_TYPE_BULK: Bulk type
+ * @arg EP_TYPE_INTR: Interrupt type
+ * @param mps : Max Packet Size
+ * This parameter can be a value from 0 to32K
+ * @retval HAL state
+ */
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ __HAL_LOCK(hhcd);
+
+ hhcd->hc[ch_num].dev_addr = dev_address;
+ hhcd->hc[ch_num].max_packet = mps;
+ hhcd->hc[ch_num].ch_num = ch_num;
+ hhcd->hc[ch_num].ep_type = ep_type;
+ hhcd->hc[ch_num].ep_num = epnum & 0x7F;
+ hhcd->hc[ch_num].ep_is_in = ((epnum & 0x80) == 0x80);
+ hhcd->hc[ch_num].speed = speed;
+
+ status = USB_HC_Init(hhcd->Instance,
+ ch_num,
+ epnum,
+ dev_address,
+ speed,
+ ep_type,
+ mps);
+ __HAL_UNLOCK(hhcd);
+
+ return status;
+}
+
+
+
+/**
+ * @brief Halt a host channel
+ * @param hhcd : HCD handle
+ * @param ch_num : Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval HAL state
+ */
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ __HAL_LOCK(hhcd);
+ USB_HC_Halt(hhcd->Instance, ch_num);
+ __HAL_UNLOCK(hhcd);
+
+ return status;
+}
+/**
+ * @brief DeInitialize the host driver
+ * @param hhcd : HCD handle
+ * @retval HAL state
+ */
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd)
+{
+ /* Check the HCD handle allocation */
+ if(hhcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hhcd->State = HCD_BUSY;
+
+ /* DeInit the low level hardware */
+ HAL_HCD_MspDeInit(hhcd);
+
+ __HAL_HCD_DISABLE(hhcd);
+
+ hhcd->State = HCD_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the HCD MSP.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspInit could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes HCD MSP.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhhcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCD_MspDeInit could be implenetd in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Group2 IO operation functions
+ * @brief HCD IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ This subsection provides a set of functions allowing to manage the USB Host Data
+ Transfer
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Submit a new URB for processing
+ * @param hhcd : HCD handle
+ * @param ch_num : Channel number
+ * This parameter can be a value from 1 to 15
+ * @param direction : Channel number
+ * This parameter can be one of the these values:
+ * 0 : Output
+ * 1 : Input
+ * @param ep_type : Endpoint Type
+ * This parameter can be one of the these values:
+ * @arg EP_TYPE_CTRL: Control type
+ * @arg EP_TYPE_ISOC: Isochrounous type
+ * @arg EP_TYPE_BULK: Bulk type
+ * @arg EP_TYPE_INTR: Interrupt type
+ * @param token : Endpoint Type
+ * This parameter can be one of the these values:
+ * @arg 0: HC_PID_SETUP
+ * @arg 1: HC_PID_DATA1
+ * @param pbuff : pointer to URB data
+ * @param length : Length of URB data
+ * @param do_ping : activate do ping protocol (for high speed only)
+ * This parameter can be one of the these values:
+ * 0 : do ping inactive
+ * 1 : do ping active
+ * @retval HAL state
+ */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t direction ,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping)
+{
+ hhcd->hc[ch_num].ep_is_in = direction;
+ hhcd->hc[ch_num].ep_type = ep_type;
+
+ if(token == 0)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_SETUP;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+
+ /* Manage Data Toggle */
+ switch(ep_type)
+ {
+ case EP_TYPE_CTRL:
+ if((token == 1) && (direction == 0)) /*send data */
+ {
+ if ( length == 0 )
+ { /* For Status OUT stage, Length==0, Status Out PID = 1 */
+ hhcd->hc[ch_num].toggle_out = 1;
+ }
+
+ /* Set the Data Toggle bit as per the Flag */
+ if ( hhcd->hc[ch_num].toggle_out == 0)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1 ;
+ }
+ if(hhcd->hc[ch_num].urb_state != URB_NOTREADY)
+ {
+ hhcd->hc[ch_num].do_ping = do_ping;
+ }
+ }
+ break;
+
+ case EP_TYPE_BULK:
+ if(direction == 0)
+ {
+ /* Set the Data Toggle bit as per the Flag */
+ if ( hhcd->hc[ch_num].toggle_out == 0)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1 ;
+ }
+ if(hhcd->hc[ch_num].urb_state != URB_NOTREADY)
+ {
+ hhcd->hc[ch_num].do_ping = do_ping;
+ }
+ }
+ else
+ {
+ if( hhcd->hc[ch_num].toggle_in == 0)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ }
+
+ break;
+ case EP_TYPE_INTR:
+ if(direction == 0)
+ {
+ /* Set the Data Toggle bit as per the Flag */
+ if ( hhcd->hc[ch_num].toggle_out == 0)
+ { /* Put the PID 0 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ { /* Put the PID 1 */
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1 ;
+ }
+ }
+ else
+ {
+ if( hhcd->hc[ch_num].toggle_in == 0)
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ }
+ else
+ {
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+ }
+ }
+ break;
+
+ case EP_TYPE_ISOC:
+ hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+ break;
+
+ }
+
+ hhcd->hc[ch_num].xfer_buff = pbuff;
+ hhcd->hc[ch_num].xfer_len = length;
+ hhcd->hc[ch_num].urb_state = URB_IDLE;
+ hhcd->hc[ch_num].xfer_count = 0 ;
+ hhcd->hc[ch_num].ch_num = ch_num;
+ hhcd->hc[ch_num].state = HC_IDLE;
+
+ return USB_HC_StartXfer(hhcd->Instance, &(hhcd->hc[ch_num]), hhcd->Init.dma_enable);
+}
+
+/**
+ * @brief This function handles HCD interrupt request.
+ * @param hhcd: HCD handle
+ * @retval none
+ */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint32_t i = 0 , interrupt = 0;
+
+ /* ensure that we are in device mode */
+ if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST)
+ {
+ /* avoid spurious interrupt */
+ if(__HAL_HCD_IS_INVALID_INTERRUPT(hhcd))
+ {
+ return;
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+ {
+ /* incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR))
+ {
+ /* incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE))
+ {
+ /* incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE);
+ }
+
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS))
+ {
+ /* incorrect mode, acknowledge the interrupt */
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS);
+ }
+
+ /* Handle Host Disconnect Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT))
+ {
+
+ /* Cleanup HPRT */
+ USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ /* Handle Host Port Interrupts */
+ HAL_HCD_Disconnect_Callback(hhcd);
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT);
+ }
+
+ /* Handle Host Port Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT))
+ {
+ HAL_HCD_Port_IRQHandler (hhcd);
+ }
+
+ /* Handle Host SOF Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF))
+ {
+ HAL_HCD_SOF_Callback(hhcd);
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
+ }
+
+ /* Handle Host channel Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
+ {
+
+ interrupt = USB_HC_ReadInterrupt(hhcd->Instance);
+ for (i = 0; i < hhcd->Init.Host_channels ; i++)
+ {
+ if (interrupt & (1 << i))
+ {
+ if ((USBx_HC(i)->HCCHAR) & USB_OTG_HCCHAR_EPDIR)
+ {
+ HAL_HCD_HC_IN_IRQHandler (hhcd, i);
+ }
+ else
+ {
+ HAL_HCD_HC_OUT_IRQHandler (hhcd, i);
+ }
+ }
+ }
+ __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
+ }
+
+ /* Handle Rx Queue Level Interrupts */
+ if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL))
+ {
+ USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+ HAL_HCD_RXQLVL_IRQHandler (hhcd);
+
+ USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+ }
+
+ }
+}
+
+/**
+ * @brief SOF callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_SOF_Callback could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief Connexion Event callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_Connect_Callback could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief Disonnexion Event callback.
+ * @param hhcd: HCD handle
+ * @retval None
+ */
+__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_Disconnect_Callback could be implenetd in the user file
+ */
+}
+
+/**
+ * @brief Notify URB state change callback.
+ * @param hhcd: HCD handle
+ * @param chnum : Channel number
+ * This parameter can be a value from 1 to 15
+ * @param urb_state:
+ * This parameter can be one of the these values:
+ * @arg URB_IDLE
+ * @arg URB_DONE
+ * @arg URB_NOTREADY
+ * @arg URB_NYET
+ * @arg URB_ERROR
+ * @arg URB_STALL
+ * @retval None
+ */
+__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_HCD_HC_NotifyURBChange_Callback could be implenetd in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the HCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start the host driver
+ * @param hhcd : HCD handle
+ * @retval HAL state
+ */
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd)
+{
+ __HAL_LOCK(hhcd);
+ __HAL_HCD_ENABLE(hhcd);
+ USB_DriveVbus(hhcd->Instance, 1);
+ __HAL_UNLOCK(hhcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the host driver
+ * @param hhcd : HCD handle
+ * @retval HAL state
+ */
+
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd)
+{
+ __HAL_LOCK(hhcd);
+ USB_StopHost(hhcd->Instance);
+ USB_DriveVbus(hhcd->Instance, 0);
+ __HAL_UNLOCK(hhcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Reset the host port
+ * @param hhcd : HCD handle
+ * @retval HAL state
+ */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_ResetPort(hhcd->Instance));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the HCD state
+ * @param hhcd : HCD handle
+ * @retval HAL state
+ */
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd)
+{
+ return hhcd->State;
+}
+
+/**
+ * @brief Return URB state for a channel
+ * @param hhcd : HCD handle
+ * @param chnum : Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval URB state
+ * This parameter can be one of the these values:
+ * @arg URB_IDLE
+ * @arg URB_DONE
+ * @arg URB_NOTREADY
+ * @arg URB_NYET
+ * @arg URB_ERROR
+ * @arg URB_STALL
+ */
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].urb_state;
+}
+
+
+/**
+ * @brief Return the last host transfer size
+ * @param hhcd : HCD handle
+ * @param chnum : Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval last transfer size in byte
+ */
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].xfer_count;
+}
+
+/**
+ * @brief Return the Host Channel state
+ * @param hhcd : HCD handle
+ * @param chnum : Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval Host channel state
+ * This parameter can be one of the these values:
+ * @arg HC_IDLE
+ * @arg HC_XFRC
+ * @arg HC_HALTED
+ * @arg HC_NYET
+ * @arg HC_NAK
+ * @arg HC_STALL
+ * @arg HC_XACTERR
+ * @arg HC_BBLERR
+ * @arg HC_DATATGLERR
+ */
+HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ return hhcd->hc[chnum].state;
+}
+
+/**
+ * @brief Return the current Host frame number
+ * @param hhcd : HCD handle
+ * @retval current Host frame number
+ */
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_GetCurrentFrame(hhcd->Instance));
+}
+
+/**
+ * @brief Return the Host enumeration speed
+ * @param hhcd : HCD handle
+ * @retval Enumeration speed
+ */
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd)
+{
+ return (USB_GetHostSpeed(hhcd->Instance));
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @brief This function handles Host Channel IN interrupt requests.
+ * @param hhcd: HCD handle
+ * @param chnum : Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval none
+ */
+static void HAL_HCD_HC_IN_IRQHandler (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_AHBERR)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_ACK)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_STALL)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ hhcd->hc[chnum].state = HC_STALL;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_DTERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ hhcd->hc[chnum].state = HC_DATATGLERR;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+ }
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_FRMOR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_XFRC)
+ {
+
+ if (hhcd->Init.dma_enable)
+ {
+ hhcd->hc[chnum].xfer_count = hhcd->hc[chnum].xfer_len - \
+ (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ);
+ }
+
+ hhcd->hc[chnum].state = HC_XFRC;
+ hhcd->hc[chnum].ErrCnt = 0;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+
+
+ if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+ (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+
+ }
+ else if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+ {
+ USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+ hhcd->hc[chnum].toggle_in ^= 1;
+
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_CHH)
+ {
+ __HAL_HCD_MASK_HALT_HC_INT(chnum);
+
+ if(hhcd->hc[chnum].state == HC_XFRC)
+ {
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_STALL)
+ {
+ hhcd->hc[chnum].urb_state = URB_STALL;
+ }
+
+ else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+ (hhcd->hc[chnum].state == HC_DATATGLERR))
+ {
+ if(hhcd->hc[chnum].ErrCnt++ > 3)
+ {
+ hhcd->hc[chnum].ErrCnt = 0;
+ hhcd->hc[chnum].urb_state = URB_ERROR;
+ }
+ else
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ /* re-activate the channel */
+ USBx_HC(chnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHDIS;
+ USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_TXERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ hhcd->hc[chnum].ErrCnt++;
+ hhcd->hc[chnum].state = HC_XACTERR;
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NAK)
+ {
+ if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ }
+ else if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+ (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+ {
+ /* re-activate the channel */
+ USBx_HC(chnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHDIS;
+ USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+
+ }
+ hhcd->hc[chnum].state = HC_NAK;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ }
+}
+
+/**
+ * @brief This function handles Host Channel OUT interrupt requests.
+ * @param hhcd: HCD handle
+ * @param chnum : Channel number
+ * This parameter can be a value from 1 to 15
+ * @retval none
+ */
+static void HAL_HCD_HC_OUT_IRQHandler (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+
+ if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_AHBERR)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ }
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_ACK)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+
+ if( hhcd->hc[chnum].do_ping == 1)
+ {
+ hhcd->hc[chnum].state = HC_NYET;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NYET)
+ {
+ hhcd->hc[chnum].state = HC_NYET;
+ hhcd->hc[chnum].ErrCnt= 0;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET);
+
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_FRMOR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_XFRC)
+ {
+ hhcd->hc[chnum].ErrCnt = 0;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+ hhcd->hc[chnum].state = HC_XFRC;
+
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_STALL)
+ {
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_STALL;
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NAK)
+ {
+ hhcd->hc[chnum].ErrCnt = 0;
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_NAK;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_TXERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ hhcd->hc[chnum].state = HC_XACTERR;
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+ }
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_DTERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+ USB_HC_Halt(hhcd->Instance, chnum);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+ hhcd->hc[chnum].state = HC_DATATGLERR;
+ }
+
+
+ else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_CHH)
+ {
+ __HAL_HCD_MASK_HALT_HC_INT(chnum);
+
+ if(hhcd->hc[chnum].state == HC_XFRC)
+ {
+ hhcd->hc[chnum].urb_state = URB_DONE;
+ if (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)
+ {
+ hhcd->hc[chnum].toggle_out ^= 1;
+ }
+ }
+ else if (hhcd->hc[chnum].state == HC_NAK)
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_NYET)
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ hhcd->hc[chnum].do_ping = 0;
+ }
+
+ else if (hhcd->hc[chnum].state == HC_STALL)
+ {
+ hhcd->hc[chnum].urb_state = URB_STALL;
+ }
+
+ else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+ (hhcd->hc[chnum].state == HC_DATATGLERR))
+ {
+ if(hhcd->hc[chnum].ErrCnt++ > 3)
+ {
+ hhcd->hc[chnum].ErrCnt = 0;
+ hhcd->hc[chnum].urb_state = URB_ERROR;
+ }
+ else
+ {
+ hhcd->hc[chnum].urb_state = URB_NOTREADY;
+ }
+
+ /* re-activate the channel */
+ USBx_HC(chnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHDIS;
+ USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
+
+ __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+ }
+}
+
+/**
+ * @brief This function handles Rx Queue Level interrupt requests.
+ * @param hhcd: HCD handle
+ * @retval none
+ */
+static void HAL_HCD_RXQLVL_IRQHandler (HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ uint8_t channelnum =0;
+ uint32_t pktsts;
+ uint32_t pktcnt;
+ uint32_t temp = 0;
+
+ temp = hhcd->Instance->GRXSTSP ;
+ channelnum = temp & USB_OTG_GRXSTSP_EPNUM;
+ pktsts = (temp & USB_OTG_GRXSTSP_PKTSTS) >> 17;
+ pktcnt = (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+
+ switch (pktsts)
+ {
+ case GRXSTS_PKTSTS_IN:
+ /* Read the data into the host buffer. */
+ if ((pktcnt > 0) && (hhcd->hc[channelnum].xfer_buff != (void *)0))
+ {
+
+ USB_ReadPacket(hhcd->Instance, hhcd->hc[channelnum].xfer_buff, pktcnt);
+
+ /*manage multiple Xfer */
+ hhcd->hc[channelnum].xfer_buff += pktcnt;
+ hhcd->hc[channelnum].xfer_count += pktcnt;
+
+ if((USBx_HC(channelnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) > 0)
+ {
+ /* re-activate the channel when more packets are expected */
+ USBx_HC(channelnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHDIS;
+ USBx_HC(channelnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ hhcd->hc[channelnum].toggle_in ^= 1;
+ }
+ }
+ break;
+
+ case GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
+ break;
+ case GRXSTS_PKTSTS_IN_XFER_COMP:
+ case GRXSTS_PKTSTS_CH_HALTED:
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief This function handles Host Port interrupt requests.
+ * @param hhcd: HCD handle
+ * @retval none
+ */
+static void HAL_HCD_Port_IRQHandler (HCD_HandleTypeDef *hhcd)
+{
+ USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+ __IO uint32_t hprt0, hprt0_dup;
+
+ /* Handle Host Port Interrupts */
+ hprt0 = USBx_HPRT0;
+ hprt0_dup = USBx_HPRT0;
+
+ hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+ USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+
+ /* Check wether Port Connect Detected */
+ if((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET)
+ {
+ if((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS)
+ {
+ HAL_HCD_Connect_Callback(hhcd);
+ }
+ hprt0_dup |= USB_OTG_HPRT_PCDET;
+
+ }
+
+ /* Check whether Port Enable Changed */
+ if((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG)
+ {
+ hprt0_dup |= USB_OTG_HPRT_PENCHNG;
+
+ if((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA)
+ {
+ if(hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY)
+ {
+ if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17))
+ {
+ USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_6_MHZ );
+ }
+ else if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_FULL_SPEED << 17))
+ {
+ USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+ }
+ }
+ else
+ {
+ USB_InitFSLSPClkSel(USBx , HCFG_30_60_MHZ);
+ }
+ HAL_HCD_Connect_Callback(hhcd);
+ }
+ }
+
+ /* Check For an overcurrent */
+ if((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG)
+ {
+ hprt0_dup |= USB_OTG_HPRT_POCCHNG;
+ }
+
+ /* Clear Port Interrupts */
+ USBx_HPRT0 = hprt0_dup;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_HCD_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/