CMSIS DSP library

Dependents:   KL25Z_FFT_Demo Hat_Board_v5_1 KL25Z_FFT_Demo_tony KL25Z_FFT_Demo_tony ... more

Fork of mbed-dsp by mbed official

cmsis_dsp/StatisticsFunctions/arm_var_q31.c

Committer:
mbed_official
Date:
2013-11-08
Revision:
3:7a284390b0ce
Parent:
2:da51fb522205

File content as of revision 3:7a284390b0ce:

/* ----------------------------------------------------------------------    
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.    
*    
* $Date:        17. January 2013
* $Revision: 	V1.4.1  
*    
* Project: 	    CMSIS DSP Library    
* Title:		arm_var_q31.c    
*    
* Description:	Variance of an array of Q31 type.    
*    
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*  
* Redistribution and use in source and binary forms, with or without 
* modification, are permitted provided that the following conditions
* are met:
*   - Redistributions of source code must retain the above copyright
*     notice, this list of conditions and the following disclaimer.
*   - Redistributions in binary form must reproduce the above copyright
*     notice, this list of conditions and the following disclaimer in
*     the documentation and/or other materials provided with the 
*     distribution.
*   - Neither the name of ARM LIMITED nor the names of its contributors
*     may be used to endorse or promote products derived from this
*     software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.   
* -------------------------------------------------------------------- */

#include "arm_math.h"

/**        
 * @ingroup groupStats        
 */

/**        
 * @addtogroup variance        
 * @{        
 */

/**        
 * @brief Variance of the elements of a Q31 vector.        
 * @param[in]       *pSrc points to the input vector        
 * @param[in]       blockSize length of the input vector        
 * @param[out]      *pResult variance value returned here        
 * @return none.        
 *        
 * @details        
 * <b>Scaling and Overflow Behavior:</b>        
 *        
 *\par        
 * The function is implemented using an internal 64-bit accumulator.        
 * The input is represented in 1.31 format, and intermediate multiplication        
 * yields a 2.62 format.        
 * The accumulator maintains full precision of the intermediate multiplication results,         
 * but provides only a single guard bit.        
 * There is no saturation on intermediate additions.        
 * If the accumulator overflows it wraps around and distorts the result.        
 * In order to avoid overflows completely the input signal must be scaled down by         
 * log2(blockSize) bits, as a total of blockSize additions are performed internally.         
 * Finally, the 2.62 accumulator is right shifted by 31 bits to yield a 1.31 format value.        
 *        
 */


void arm_var_q31(
  q31_t * pSrc,
  uint32_t blockSize,
  q63_t * pResult)
{
  q63_t sum = 0, sumSquare = 0;                  /* Accumulator */
  q31_t meanOfSquares, squareOfMean;             /* square of mean and mean of square */
  q31_t mean;                                    /* mean */
  q31_t in;                                      /* input value */
  q31_t t;                                       /* Temporary variable */
  uint32_t blkCnt;                               /* loop counter */

#ifndef ARM_MATH_CM0_FAMILY

  /* Run the below code for Cortex-M4 and Cortex-M3 */
  q63_t sumSquare1 = 0;                          /* Accumulator */
  q31_t in1, in2, in3, in4;                      /* Temporary input variables */

  /*loop Unrolling */
  blkCnt = blockSize >> 2u;

  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.    
   ** a second loop below computes the remaining 1 to 3 samples. */
  while(blkCnt > 0u)
  {
    /* C = (A[0] * A[0] + A[1] * A[1] + ... + A[blockSize-1] * A[blockSize-1])  */
    /* Compute Sum of squares of the input samples        
     * and then store the result in a temporary variable, sum. */
    /* read input samples from source buffer */
    in1 = pSrc[0];
    in2 = pSrc[1];

    /* calculate sum of inputs */
    sum += in1;
    /* calculate sum of squares */
    sumSquare += ((q63_t) (in1) * (in1));
    in3 = pSrc[2];
    sum += in2;
    sumSquare1 += ((q63_t) (in2) * (in2));
    in4 = pSrc[3];
    sum += in3;
    sumSquare += ((q63_t) (in3) * (in3));
    sum += in4;
    sumSquare1 += ((q63_t) (in4) * (in4));

    /* update input pointer to process next samples */
    pSrc += 4u;

    /* Decrement the loop counter */
    blkCnt--;
  }

  /* add two accumulators */
  sumSquare = sumSquare + sumSquare1;

  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.    
   ** No loop unrolling is used. */
  blkCnt = blockSize % 0x4u;

#else

  /* Run the below code for Cortex-M0 */
  blkCnt = blockSize;

#endif /* #ifndef ARM_MATH_CM0_FAMILY */

  while(blkCnt > 0u)
  {
    /* C = (A[0] * A[0] + A[1] * A[1] + ... + A[blockSize-1] * A[blockSize-1]) */
    /* Compute Sum of squares of the input samples        
     * and then store the result in a temporary variable, sum. */
    in = *pSrc++;
    sumSquare += ((q63_t) (in) * (in));
    sum += in;

    /* Decrement the loop counter */
    blkCnt--;
  }

  t = (q31_t) ((1.0f / (float32_t) (blockSize - 1u)) * 1073741824.0f);

  /* Compute Mean of squares of the input samples        
   * and then store the result in a temporary variable, meanOfSquares. */
  sumSquare = (sumSquare >> 31);
  meanOfSquares = (q31_t) ((sumSquare * t) >> 30);

  /* Compute mean of all input values */
  t = (q31_t) ((1.0f / (blockSize * (blockSize - 1u))) * 2147483648.0f);
  mean = (q31_t) (sum);

  /* Compute square of mean */
  squareOfMean = (q31_t) (((q63_t) mean * mean) >> 31);
  squareOfMean = (q31_t) (((q63_t) squareOfMean * t) >> 31);

  /* Compute variance and then store the result to the destination */
  *pResult = (q63_t) meanOfSquares - squareOfMean;

}

/**        
 * @} end of variance group        
 */