Vekatech
SDHI_driver patch (mbedOS 5.11.5)
Diff: mbed-os-program/mbed-os/targets/TARGET_RENESAS/TARGET_RZ_A1XX/TARGET_VK_RZ_A1H/device/SDHI_driver/sdif.h
- Revision:
- 2:7c75ab32d7c9
- Parent:
- 1:b07be64e592e
--- a/mbed-os-program/mbed-os/targets/TARGET_RENESAS/TARGET_RZ_A1XX/TARGET_VK_RZ_A1H/device/SDHI_driver/sdif.h Mon Mar 18 12:48:38 2019 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,329 +0,0 @@
-/******************************************************************************
-* DISCLAIMER
-*
-* This software is supplied by Renesas Electronics Corporation and is only
-* intended for use with Renesas products. No other uses are authorized.
-*
-* This software is owned by Renesas Electronics Corporation and is protected under
-* all applicable laws, including copyright laws.
-*
-* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES
-* REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY,
-* INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-* PARTICULAR PURPOSE AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY
-* DISCLAIMED.
-*
-* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
-* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
-* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
-* FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS
-* AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Renesas reserves the right, without notice, to make changes to this
-* software and to discontinue the availability of this software.
-* By using this software, you agree to the additional terms and
-* conditions found by accessing the following link:
-* http://www.renesas.com/disclaimer
-********************************************************************************
-* Copyright (C) 2013 Renesas Electronics Corporation. All rights reserved.
-**************************** Technical reference data **************************
-* System Name : SD Driver Sample Program
-* File Name : sdif.h
-* Abstract : SD Memory card driver configration
-* Version : 4.00.00
-* Device : Aragon
-* Tool-Chain : DS-5 Ver 5.13
-* ARM Complier
-* OS : None
-* H/W Platform:
-* Description :
-********************************************************************************
-* History : 2013.07.12 Ver.4.00.00
-*******************************************************************************/
-#ifndef _SDDRV_H_
-#define _SDDRV_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/* ==== define ==== */
-/* ---- SD Driver work buffer ---- */
-#define SD_SIZE_OF_INIT 800
-
-/* ---- error code ---- */
-#define SD_OK_LOCKED_CARD 1 /* OK but card is locked status */
-#define SD_OK 0 /* OK */
-#define SD_ERR -1 /* general error */
-#define SD_ERR_WP -2 /* write protect error */
-#define SD_ERR_RO -3 /* read only error */
-#define SD_ERR_RES_TOE -4 /* response time out error */
-#define SD_ERR_CARD_TOE -5 /* card time out error */
-#define SD_ERR_END_BIT -6 /* end bit error */
-#define SD_ERR_CRC -7 /* CRC error */
-#define SD_ERR_CARD_RES -8 /* card response error */
-#define SD_ERR_HOST_TOE -9 /* host time out error */
-#define SD_ERR_CARD_ERASE -10 /* card erase error */
-#define SD_ERR_CARD_LOCK -11 /* card lock error */
-#define SD_ERR_CARD_UNLOCK -12 /* card unlock error */
-#define SD_ERR_HOST_CRC -13 /* host CRC error */
-#define SD_ERR_CARD_ECC -14 /* card internal ECC error */
-#define SD_ERR_CARD_CC -15 /* card internal error */
-#define SD_ERR_CARD_ERROR -16 /* unknown card error */
-#define SD_ERR_CARD_TYPE -17 /* non support card type */
-#define SD_ERR_NO_CARD -18 /* no card */
-#define SD_ERR_ILL_READ -19 /* illegal buffer read */
-#define SD_ERR_ILL_WRITE -20 /* illegal buffer write */
-#define SD_ERR_AKE_SEQ -21 /* the sequence of authentication process */
-#define SD_ERR_OVERWRITE -22 /* CID/CSD overwrite error */
-/* 23-29 */
-#define SD_ERR_CPU_IF -30 /* target CPU interface function error */
-#define SD_ERR_STOP -31 /* user stop */
-/* 32-49 */
-#define SD_ERR_CSD_VER -50 /* CSD register version error */
-#define SD_ERR_SCR_VER -51 /* SCR register version error */
-#define SD_ERR_FILE_FORMAT -52 /* CSD register file format error */
-#define SD_ERR_NOTSUP_CMD -53 /* not supported command */
-/* 54-59 */
-#define SD_ERR_ILL_FUNC -60 /* invalid function request error */
-#define SD_ERR_IO_VERIFY -61 /* direct write verify error */
-#define SD_ERR_IO_CAPAB -62 /* IO capability error */
-/* 63-69 */
-#define SD_ERR_IFCOND_VER -70 /* Interface condition version error */
-#define SD_ERR_IFCOND_VOLT -71 /* Interface condition voltage error */
-#define SD_ERR_IFCOND_ECHO -72 /* Interface condition echo back pattern error */
-/* 73-79 */
-#define SD_ERR_OUT_OF_RANGE -80 /* the argument was out of range */
-#define SD_ERR_ADDRESS_ERROR -81 /* misassigned address */
-#define SD_ERR_BLOCK_LEN_ERROR -82 /* transfered block length is not allowed */
-#define SD_ERR_ILLEGAL_COMMAND -83 /* Command not legal */
-#define SD_ERR_RESERVED_ERROR18 -84 /* Reserved bit 18 Error */
-#define SD_ERR_RESERVED_ERROR17 -85 /* Reserved bit 17 Error */
-#define SD_ERR_CMD_ERROR -86 /* SD_INFO2 bit 0 CMD error */
-#define SD_ERR_CBSY_ERROR -87 /* SD_INFO2 bit 14 CMD Type Reg Busy error */
-#define SD_ERR_NO_RESP_ERROR -88 /* SD_INFO1 bit 0 No Response error */
-/* 89 */
-/* 90-95 */
-#define SD_ERR_ERROR -96 /* SDIO ERROR */
-#define SD_ERR_FUNCTION_NUMBER -97 /* SDIO FUNCTION NUMBER ERROR */
-#define SD_ERR_COM_CRC_ERROR -98 /* SDIO CRC ERROR */
-#define SD_ERR_INTERNAL -99 /* driver software internal error */
-
-/* ---- driver mode ---- */
-#define SD_MODE_POLL 0x0000ul /* status check mode is software polling */
-#define SD_MODE_HWINT 0x0001ul /* status check mode is hardware interrupt */
-#define SD_MODE_SW 0x0000ul /* data transfer mode is software */
-#define SD_MODE_DMA 0x0002ul /* data transfer mode is DMA */
-#define SD_MODE_DMA_64 0x0004ul /* data transfer mode is DMA with 64 byte burst mode */
-
-/* ---- support mode ---- */
-#define SD_MODE_MEM 0x0000ul /* memory cards only are supported */
-#define SD_MODE_IO 0x0010ul /* memory and io cards are supported */
-#define SD_MODE_COMBO 0x0030ul /* memory ,io and combo cards are supported */
-#define SD_MODE_DS 0x0000ul /* only default speed mode is supported */
-#define SD_MODE_HS 0x0040ul /* high speed mode is also supported */
-#define SD_MODE_VER1X 0x0000ul /* ver1.1 host */
-#define SD_MODE_VER2X 0x0080ul /* ver2.x host (high capacity and dual voltage) */
-#define SD_MODE_1BIT 0x0100ul /* SD Mode 1bit only is supported */
-#define SD_MODE_4BIT 0x0000ul /* SD Mode 1bit and 4bit is supported */
-
-/* ---- media voltage ---- */
-#define SD_VOLT_1_7 0x00000010ul /* low voltage card minimum */
-#define SD_VOLT_1_8 0x00000020ul
-#define SD_VOLT_1_9 0x00000040ul
-#define SD_VOLT_2_0 0x00000080ul
-#define SD_VOLT_2_1 0x00000100ul /* basic communication minimum */
-#define SD_VOLT_2_2 0x00000200ul
-#define SD_VOLT_2_3 0x00000400ul
-#define SD_VOLT_2_4 0x00000800ul
-#define SD_VOLT_2_5 0x00001000ul
-#define SD_VOLT_2_6 0x00002000ul
-#define SD_VOLT_2_7 0x00004000ul
-#define SD_VOLT_2_8 0x00008000ul /* memory access minimum */
-#define SD_VOLT_2_9 0x00010000ul
-#define SD_VOLT_3_0 0x00020000ul
-#define SD_VOLT_3_1 0x00040000ul
-#define SD_VOLT_3_2 0x00080000ul
-#define SD_VOLT_3_3 0x00100000ul
-#define SD_VOLT_3_4 0x00200000ul
-#define SD_VOLT_3_5 0x00400000ul
-#define SD_VOLT_3_6 0x00800000ul
-
-/* ---- memory card write mode ---- */
-#define SD_WRITE_WITH_PREERASE 0x0000u /* pre-erease write */
-#define SD_WRITE_OVERWRITE 0x0001u /* overwrite */
-
-/* ---- io register write mode ---- */
-#define SD_IO_SIMPLE_WRITE 0x0000u /* just write */
-#define SD_IO_VERIFY_WRITE 0x0001u /* read after write */
-
-/* ---- io operation code ---- */
-#define SD_IO_FIXED_ADDR 0x0000u /* R/W fixed address */
-#define SD_IO_INCREMENT_ADDR 0x0001u /* R/W increment address */
-#define SD_IO_FORCE_BYTE 0x0010u /* byte access only */
-
- /* ---- media type ---- */
-#define SD_MEDIA_UNKNOWN 0x0000u /* unknown media */
-#define SD_MEDIA_MMC 0x0010u /* MMC card */
-#define SD_MEDIA_SD 0x0020u /* SD Memory card */
-#define SD_MEDIA_IO 0x0001u /* SD IO card */
-#define SD_MEDIA_MEM 0x0030u /* Memory card */
-#define SD_MEDIA_COMBO 0x0021u /* SD COMBO card */
-#define SD_MEDIA_EMBEDDED 0x8000u /* embedded media */
-
-/* ---- write protect info --- */
-#define SD_WP_OFF 0x0000u /* card is not write protect */
-#define SD_WP_HW 0x0001u /* card is H/W write protect */
-#define SD_WP_TEMP 0x0002u /* card is TEMP_WRITE_PROTECT */
-#define SD_WP_PERM 0x0004u /* card is PERM_WRITE_PROTECT */
-#define SD_WP_ROM 0x0010u /* card is SD-ROM */
-
-/* ---- SD clock div ---- */ /* IMCLK is host controller clock */
-#define SD_DIV_512 0x0080u /* SDCLOCK = IMCLK/512 */
-#define SD_DIV_256 0x0040u /* SDCLOCK = IMCLK/256 */
-#define SD_DIV_128 0x0020u /* SDCLOCK = IMCLK/128 */
-#define SD_DIV_64 0x0010u /* SDCLOCK = IMCLK/64 */
-#define SD_DIV_32 0x0008u /* SDCLOCK = IMCLK/32 */
-#define SD_DIV_16 0x0004u /* SDCLOCK = IMCLK/16 */
-#define SD_DIV_8 0x0002u /* SDCLOCK = IMCLK/8 */
-#define SD_DIV_4 0x0001u /* SDCLOCK = IMCLK/4 */
-#define SD_DIV_2 0x0000u /* SDCLOCK = IMCLK/2 */
-#define SD_DIV_1 0x00FFu /* SDCLOCK = IMCLK (option) */
-
-/* ---- SD clock define ---- */ /* max frequency */
-#define SD_CLK_400kHz 0x0000u /* 400kHz */
-#define SD_CLK_1MHz 0x0001u /* 1MHz */
-#define SD_CLK_5MHz 0x0002u /* 5MHz */
-#define SD_CLK_10MHz 0x0003u /* 10MHz */
-#define SD_CLK_20MHz 0x0004u /* 20MHz */
-#define SD_CLK_25MHz 0x0005u /* 25MHz */
-#define SD_CLK_50MHz 0x0006u /* 50MHz (phys spec ver1.10) */
-
-/* ---- speed class ---- */
-#define SD_SPEED_CLASS_0 0x00u /* not defined, or less than ver2.0 */
-#define SD_SPEED_CLASS_2 0x01u /* 2MB/sec */
-#define SD_SPEED_CLASS_4 0x02u /* 4MB/sec */
-#define SD_SPEED_CLASS_6 0x03u /* 6MB/sec */
-
-/* ---- IO initialize flags define ---- */ /* add for IO */
-#define SD_IO_INT_ENAB 0x10u /* interrupt enable */
-#define SD_IO_POWER_INIT 0x04u /* power on initialized */
-#define SD_IO_MEM_INIT 0x02u /* memory initialized */
-#define SD_IO_FUNC_INIT 0x01u /* io func initialized */
-
-/* ---- IO function's information ---- */ /* add for IO */
-#define SD_IO_FUNC_READY 0x80u /* io redy */
-#define SD_IO_FUNC_NUM 0x70u /* number of io func */
-#define SD_IO_FUNC_EXISTS 0x04u /* memory present */
-
-/* ---- SD port mode ---- */
-#define SD_PORT_SERIAL 0x0000u /* 1bit mode */
-#define SD_PORT_PARALLEL 0x0001u /* 4bits mode */
-
-/* ---- SD Card detect port ---- */
-#define SD_CD_SOCKET 0x0000u /* CD pin */
-#define SD_CD_DAT3 0x0001u /* DAT3 pin */
-
-/* ---- SD Card detect interrupt ---- */
-#define SD_CD_INT_DISABLE 0x0000u /* card detect interrupt disable */
-#define SD_CD_INT_ENABLE 0x0001u /* card detect interrupt enable */
-
-/* ---- format mode ---- */
-#define SD_FORMAT_QUICK 0x0000u /* quick format */
-#define SD_FORMAT_FULL 0x0001u /* full format */
-
-/* ---- lock/unlock mode ---- */
-#define SD_FORCE_ERASE 0x08
-#define SD_LOCK_CARD 0x04
-#define SD_UNLOCK_CARD 0x00
-#define SD_CLR_PWD 0x02
-#define SD_SET_PWD 0x01
-
-/* ==== API prototype ===== */
-/* ---- access library I/F ---- */
-int sd_init(int sd_port, unsigned long base, void *workarea, int cd_port);
-int sd_cd_int(int sd_port, int enable,int (*callback)(int, int));
-int sd_check_media(int sd_port);
-int sd_format(int sd_port, int mode,int (*callback)(unsigned long,unsigned long));
-int sd_format2(int sd_port, int mode,unsigned long volserial,int (*callback)(unsigned long,unsigned long));
-int sd_mount(int sd_port, unsigned long mode,unsigned long voltage);
-int sd_read_sect(int sd_port, unsigned char *buff,unsigned long psn,long cnt);
-int sd_write_sect(int sd_port, unsigned char *buff,unsigned long psn,long cnt,int writemode);
-int sd_get_type(int sd_port, unsigned char *type,unsigned char *speed,unsigned char *capa);
-int sd_get_size(int sd_port, unsigned long *user,unsigned long *protect);
-int sd_iswp(int sd_port);
-int sd_unmount(int sd_port);
-void sd_stop(int sd_port);
-int sd_set_intcallback(int sd_port, int (*callback)(int, int));
-void sd_int_handler(int sd_port);
-int sd_get_error(int sd_port);
-int sd_check_int(int sd_port);
-int sd_get_reg(int sd_port, unsigned char *ocr,unsigned char *cid,unsigned char *csd, unsigned char *dsr,unsigned char *scr);
-int sd_get_rca(int sd_port, unsigned char *rca);
-int sd_get_sdstatus(int sd_port, unsigned char *sdstatus);
-int sd_get_speed(int sd_port, unsigned char *clss,unsigned char *move);
-int sd_finalize(int sd_port);
-int sd_set_seccnt(int sd_port, short sectors);
-int sd_get_seccnt(int sd_port);
-int sd_get_ver(int sd_port, unsigned short *sdhi_ver,char *sddrv_ver);
-int sd_set_cdtime(int sd_port, unsigned short cdtime);
-int sd_set_responsetime(int sd_port, unsigned short responsetime);
-int sd_set_buffer(int sd_port, void *buff,unsigned long size);
-int sd_inactive(int sd_port);
-int sd_set_softwp(int sd_port, int is_set,unsigned long data);
-int sd_set_tmpwp(int sd_port, int is_set);
-int sd_lock_unlock(int sd_port, unsigned char code,unsigned char *pwd,unsigned char len);
-
-int esd_get_partition_id(int sd_port, int *id);
-int esd_select_partition(int sd_port, int id);
-int esd_query_partition(int sd_port, int sub, unsigned char *data);
-
-int sdio_read_direct(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr);
-int sdio_write_direct(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,unsigned long raw_flag);
-int sdio_check_int(int sd_port);
-void sdio_int_handler(int sd_port);
-int sdio_set_intcallback(int sd_port, int (*callback)(int));
-int sdio_enable_int(int sd_port);
-int sdio_disable_int(int sd_port);
-int sdio_read(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,long cnt,unsigned long op_code);
-int sdio_write(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,long cnt,unsigned long op_code);
-int sdio_reset(int sd_port);
-int sdio_get_ioocr(int sd_port, unsigned long *ioocr);
-int sdio_get_ioinfo(int sd_port, unsigned char *ioinfo);
-int sdio_get_cia(int sd_port, unsigned char *reg, unsigned char *cis, unsigned long func_num, long cnt);
-int sdio_set_enable(int sd_port, unsigned char func_bit);
-int sdio_get_ready(int sd_port, unsigned char *func_bit);
-int sdio_set_int(int sd_port, unsigned char func_bit,int enab);
-int sdio_get_int(int sd_port, unsigned char *func_bit,int *enab);
-int sdio_set_blocklen(int sd_port, unsigned short len, unsigned long func_num);
-int sdio_get_blocklen(int sd_port, unsigned short *len, unsigned long func_num);
-void sdio_abort(int sd_port, unsigned long func_num);
-int sdio_set_blkcnt(int sd_port, short blocks);
-int sdio_get_blkcnt(int sd_port);
-
-/* ---- target CPU I/F ---- */
-int sddev_init(int sd_port);
-int sddev_power_on(int sd_port);
-int sddev_power_off(int sd_port);
-int sddev_read_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num);
-int sddev_write_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num);
-unsigned int sddev_get_clockdiv(int sd_port, int clock);
-int sddev_set_port(int sd_port, int mode);
-int sddev_int_wait(int sd_port, int msec);
-int sddev_init_dma(int sd_port, unsigned long buffadr,unsigned long regadr,long cnt,int dir);
-int sddev_wait_dma_end(int sd_port, long cnt);
-int sddev_disable_dma(int sd_port);
-int sddev_finalize(int sd_port);
-int sddev_loc_cpu(int sd_port);
-int sddev_unl_cpu(int sd_port);
-int sddev_cmd0_sdio_mount(int sd_port);
-int sddev_cmd8_sdio_mount(int sd_port);
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* _SDDRV_H_ */
-
-/* End of File */
-