Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_F103RB/stm32f10x_sdio.c

Revision:

52:a51c77007319

Child:

70:c1fbde68b492

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F103RB/stm32f10x_sdio.c	Mon Dec 02 11:30:05 2013 +0000
@@ -0,0 +1,799 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_sdio.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the SDIO firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup SDIO 
+  * @brief SDIO driver modules
+  * @{
+  */ 
+
+/** @defgroup SDIO_Private_TypesDefinitions
+  * @{
+  */ 
+
+/* ------------ SDIO registers bit address in the alias region ----------- */
+#define SDIO_OFFSET                (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET              (SDIO_OFFSET + 0x04)
+#define CLKEN_BitNumber           0x08
+#define CLKCR_CLKEN_BB            (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4))
+
+/* --- CMD Register ---*/
+
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET                (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BitNumber     0x0B
+#define CMD_SDIOSUSPEND_BB        (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BitNumber      0x0C
+#define CMD_ENCMDCOMPL_BB         (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BitNumber            0x0D
+#define CMD_NIEN_BB               (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BitNumber          0x0E
+#define CMD_ATACMD_BB             (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4))
+
+/* --- DCTRL Register ---*/
+
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET              (SDIO_OFFSET + 0x2C)
+#define DMAEN_BitNumber           0x03
+#define DCTRL_DMAEN_BB            (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BitNumber         0x08
+#define DCTRL_RWSTART_BB          (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BitNumber          0x09
+#define DCTRL_RWSTOP_BB           (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BitNumber           0x0A
+#define DCTRL_RWMOD_BB            (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BitNumber          0x0B
+#define DCTRL_SDIOEN_BB           (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4))
+
+/* ---------------------- SDIO registers bit mask ------------------------ */
+
+/* --- CLKCR Register ---*/
+
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK         ((uint32_t)0xFFFF8100) 
+
+/* --- PWRCTRL Register ---*/
+
+/* SDIO PWRCTRL Mask */
+#define PWR_PWRCTRL_MASK         ((uint32_t)0xFFFFFFFC)
+
+/* --- DCTRL Register ---*/
+
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK         ((uint32_t)0xFFFFFF08)
+
+/* --- CMD Register ---*/
+
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK           ((uint32_t)0xFFFFF800)
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR           ((uint32_t)(SDIO_BASE + 0x14))
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the SDIO peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void SDIO_DeInit(void)
+{
+  SDIO->POWER = 0x00000000;
+  SDIO->CLKCR = 0x00000000;
+  SDIO->ARG = 0x00000000;
+  SDIO->CMD = 0x00000000;
+  SDIO->DTIMER = 0x00000000;
+  SDIO->DLEN = 0x00000000;
+  SDIO->DCTRL = 0x00000000;
+  SDIO->ICR = 0x00C007FF;
+  SDIO->MASK = 0x00000000;
+}
+
+/**
+  * @brief  Initializes the SDIO peripheral according to the specified 
+  *         parameters in the SDIO_InitStruct.
+  * @param  SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure 
+  *         that contains the configuration information for the SDIO peripheral.
+  * @retval None
+  */
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+  uint32_t tmpreg = 0;
+    
+  /* Check the parameters */
+  assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge));
+  assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass));
+  assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave));
+  assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide));
+  assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); 
+   
+/*---------------------------- SDIO CLKCR Configuration ------------------------*/  
+  /* Get the SDIO CLKCR value */
+  tmpreg = SDIO->CLKCR;
+  
+  /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */
+  tmpreg &= CLKCR_CLEAR_MASK;
+  
+  /* Set CLKDIV bits according to SDIO_ClockDiv value */
+  /* Set PWRSAV bit according to SDIO_ClockPowerSave value */
+  /* Set BYPASS bit according to SDIO_ClockBypass value */
+  /* Set WIDBUS bits according to SDIO_BusWide value */
+  /* Set NEGEDGE bits according to SDIO_ClockEdge value */
+  /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */
+  tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv  | SDIO_InitStruct->SDIO_ClockPowerSave |
+             SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide |
+             SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); 
+  
+  /* Write to SDIO CLKCR */
+  SDIO->CLKCR = tmpreg;
+}
+
+/**
+  * @brief  Fills each SDIO_InitStruct member with its default value.
+  * @param  SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which 
+  *   will be initialized.
+  * @retval None
+  */
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+  /* SDIO_InitStruct members default value */
+  SDIO_InitStruct->SDIO_ClockDiv = 0x00;
+  SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising;
+  SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable;
+  SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable;
+  SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b;
+  SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable;
+}
+
+/**
+  * @brief  Enables or disables the SDIO Clock.
+  * @param  NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_ClockCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Sets the power status of the controller.
+  * @param  SDIO_PowerState: new state of the Power state. 
+  *   This parameter can be one of the following values:
+  *     @arg SDIO_PowerState_OFF
+  *     @arg SDIO_PowerState_ON
+  * @retval None
+  */
+void SDIO_SetPowerState(uint32_t SDIO_PowerState)
+{
+  /* Check the parameters */
+  assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState));
+  
+  SDIO->POWER &= PWR_PWRCTRL_MASK;
+  SDIO->POWER |= SDIO_PowerState;
+}
+
+/**
+  * @brief  Gets the power status of the controller.
+  * @param  None
+  * @retval Power status of the controller. The returned value can
+  *   be one of the following:
+  * - 0x00: Power OFF
+  * - 0x02: Power UP
+  * - 0x03: Power ON 
+  */
+uint32_t SDIO_GetPowerState(void)
+{
+  return (SDIO->POWER & (~PWR_PWRCTRL_MASK));
+}
+
+/**
+  * @brief  Enables or disables the SDIO interrupts.
+  * @param  SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled.
+  *   This parameter can be one or a combination of the following values:
+  *     @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *     @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *     @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *     @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *     @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *     @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *     @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *     @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *     @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide 
+  *                            bus mode interrupt
+  *     @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *     @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *     @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *     @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *     @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *     @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *     @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *     @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *     @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *     @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *     @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *     @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *     @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @param  NewState: new state of the specified SDIO interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None 
+  */
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_SDIO_IT(SDIO_IT));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the SDIO interrupts */
+    SDIO->MASK |= SDIO_IT;
+  }
+  else
+  {
+    /* Disable the SDIO interrupts */
+    SDIO->MASK &= ~SDIO_IT;
+  } 
+}
+
+/**
+  * @brief  Enables or disables the SDIO DMA request.
+  * @param  NewState: new state of the selected SDIO DMA request.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_DMACmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Initializes the SDIO Command according to the specified 
+  *         parameters in the SDIO_CmdInitStruct and send the command.
+  * @param  SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef 
+  *         structure that contains the configuration information for the SDIO command.
+  * @retval None
+  */
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex));
+  assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response));
+  assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait));
+  assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM));
+  
+/*---------------------------- SDIO ARG Configuration ------------------------*/
+  /* Set the SDIO Argument value */
+  SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument;
+  
+/*---------------------------- SDIO CMD Configuration ------------------------*/  
+  /* Get the SDIO CMD value */
+  tmpreg = SDIO->CMD;
+  /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */
+  tmpreg &= CMD_CLEAR_MASK;
+  /* Set CMDINDEX bits according to SDIO_CmdIndex value */
+  /* Set WAITRESP bits according to SDIO_Response value */
+  /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */
+  /* Set CPSMEN bits according to SDIO_CPSM value */
+  tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response
+           | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM;
+  
+  /* Write to SDIO CMD */
+  SDIO->CMD = tmpreg;
+}
+
+/**
+  * @brief  Fills each SDIO_CmdInitStruct member with its default value.
+  * @param  SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef 
+  *         structure which will be initialized.
+  * @retval None
+  */
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct)
+{
+  /* SDIO_CmdInitStruct members default value */
+  SDIO_CmdInitStruct->SDIO_Argument = 0x00;
+  SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00;
+  SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No;
+  SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No;
+  SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable;
+}
+
+/**
+  * @brief  Returns command index of last command for which response received.
+  * @param  None
+  * @retval Returns the command index of the last command response received.
+  */
+uint8_t SDIO_GetCommandResponse(void)
+{
+  return (uint8_t)(SDIO->RESPCMD);
+}
+
+/**
+  * @brief  Returns response received from the card for the last command.
+  * @param  SDIO_RESP: Specifies the SDIO response register. 
+  *   This parameter can be one of the following values:
+  *     @arg SDIO_RESP1: Response Register 1
+  *     @arg SDIO_RESP2: Response Register 2
+  *     @arg SDIO_RESP3: Response Register 3
+  *     @arg SDIO_RESP4: Response Register 4
+  * @retval The Corresponding response register value.
+  */
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_SDIO_RESP(SDIO_RESP));
+
+  tmp = SDIO_RESP_ADDR + SDIO_RESP;
+  
+  return (*(__IO uint32_t *) tmp); 
+}
+
+/**
+  * @brief  Initializes the SDIO data path according to the specified 
+  *   parameters in the SDIO_DataInitStruct.
+  * @param  SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that
+  *   contains the configuration information for the SDIO command.
+  * @retval None
+  */
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength));
+  assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize));
+  assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir));
+  assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode));
+  assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM));
+
+/*---------------------------- SDIO DTIMER Configuration ---------------------*/
+  /* Set the SDIO Data TimeOut value */
+  SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut;
+
+/*---------------------------- SDIO DLEN Configuration -----------------------*/
+  /* Set the SDIO DataLength value */
+  SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength;
+
+/*---------------------------- SDIO DCTRL Configuration ----------------------*/  
+  /* Get the SDIO DCTRL value */
+  tmpreg = SDIO->DCTRL;
+  /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */
+  tmpreg &= DCTRL_CLEAR_MASK;
+  /* Set DEN bit according to SDIO_DPSM value */
+  /* Set DTMODE bit according to SDIO_TransferMode value */
+  /* Set DTDIR bit according to SDIO_TransferDir value */
+  /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */
+  tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir
+           | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM;
+
+  /* Write to SDIO DCTRL */
+  SDIO->DCTRL = tmpreg;
+}
+
+/**
+  * @brief  Fills each SDIO_DataInitStruct member with its default value.
+  * @param  SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which
+  *         will be initialized.
+  * @retval None
+  */
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+  /* SDIO_DataInitStruct members default value */
+  SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF;
+  SDIO_DataInitStruct->SDIO_DataLength = 0x00;
+  SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b;
+  SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard;
+  SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block;  
+  SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable;
+}
+
+/**
+  * @brief  Returns number of remaining data bytes to be transferred.
+  * @param  None
+  * @retval Number of remaining data bytes to be transferred
+  */
+uint32_t SDIO_GetDataCounter(void)
+{ 
+  return SDIO->DCOUNT;
+}
+
+/**
+  * @brief  Read one data word from Rx FIFO.
+  * @param  None
+  * @retval Data received
+  */
+uint32_t SDIO_ReadData(void)
+{ 
+  return SDIO->FIFO;
+}
+
+/**
+  * @brief  Write one data word to Tx FIFO.
+  * @param  Data: 32-bit data word to write.
+  * @retval None
+  */
+void SDIO_WriteData(uint32_t Data)
+{ 
+  SDIO->FIFO = Data;
+}
+
+/**
+  * @brief  Returns the number of words left to be written to or read from FIFO.	
+  * @param  None
+  * @retval Remaining number of words.
+  */
+uint32_t SDIO_GetFIFOCount(void)
+{ 
+  return SDIO->FIFOCNT;
+}
+
+/**
+  * @brief  Starts the SD I/O Read Wait operation.	
+  * @param  NewState: new state of the Start SDIO Read Wait operation. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_StartSDIOReadWait(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState;
+}
+
+/**
+  * @brief  Stops the SD I/O Read Wait operation.	
+  * @param  NewState: new state of the Stop SDIO Read Wait operation. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_StopSDIOReadWait(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState;
+}
+
+/**
+  * @brief  Sets one of the two options of inserting read wait interval.
+  * @param  SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
+  *   This parameter can be:
+  *     @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK
+  *     @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2
+  * @retval None
+  */
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
+{
+  /* Check the parameters */
+  assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
+  
+  *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
+}
+
+/**
+  * @brief  Enables or disables the SD I/O Mode Operation.
+  * @param  NewState: new state of SDIO specific operation. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_SetSDIOOperation(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the SD I/O Mode suspend command sending.
+  * @param  NewState: new state of the SD I/O Mode suspend command.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the command completion signal.
+  * @param  NewState: new state of command completion signal. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_CommandCompletionCmd(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the CE-ATA interrupt.
+  * @param  NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_CEATAITCmd(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1));
+}
+
+/**
+  * @brief  Sends CE-ATA command (CMD61).
+  * @param  NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_SendCEATACmd(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Checks whether the specified SDIO flag is set or not.
+  * @param  SDIO_FLAG: specifies the flag to check. 
+  *   This parameter can be one of the following values:
+  *     @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *     @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *     @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *     @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *     @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *     @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *     @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *     @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *     @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *     @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide 
+  *                              bus mode.
+  *     @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *     @arg SDIO_FLAG_CMDACT:   Command transfer in progress
+  *     @arg SDIO_FLAG_TXACT:    Data transmit in progress
+  *     @arg SDIO_FLAG_RXACT:    Data receive in progress
+  *     @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+  *     @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+  *     @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full
+  *     @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full
+  *     @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty
+  *     @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty
+  *     @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO
+  *     @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO
+  *     @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *     @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval The new state of SDIO_FLAG (SET or RESET).
+  */
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG)
+{ 
+  FlagStatus bitstatus = RESET;
+  
+  /* Check the parameters */
+  assert_param(IS_SDIO_FLAG(SDIO_FLAG));
+  
+  if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the SDIO's pending flags.
+  * @param  SDIO_FLAG: specifies the flag to clear.  
+  *   This parameter can be one or a combination of the following values:
+  *     @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *     @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *     @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *     @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *     @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *     @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *     @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *     @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *     @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *     @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide 
+  *                              bus mode
+  *     @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *     @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *     @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+void SDIO_ClearFlag(uint32_t SDIO_FLAG)
+{ 
+  /* Check the parameters */
+  assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG));
+   
+  SDIO->ICR = SDIO_FLAG;
+}
+
+/**
+  * @brief  Checks whether the specified SDIO interrupt has occurred or not.
+  * @param  SDIO_IT: specifies the SDIO interrupt source to check. 
+  *   This parameter can be one of the following values:
+  *     @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *     @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *     @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *     @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *     @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *     @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *     @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *     @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *     @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide 
+  *                            bus mode interrupt
+  *     @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *     @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *     @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *     @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *     @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *     @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *     @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *     @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *     @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *     @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *     @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *     @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *     @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval The new state of SDIO_IT (SET or RESET).
+  */
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT)
+{ 
+  ITStatus bitstatus = RESET;
+  
+  /* Check the parameters */
+  assert_param(IS_SDIO_GET_IT(SDIO_IT));
+  if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET)  
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the SDIO's interrupt pending bits.
+  * @param  SDIO_IT: specifies the interrupt pending bit to clear. 
+  *   This parameter can be one or a combination of the following values:
+  *     @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *     @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *     @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *     @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *     @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *     @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *     @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *     @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *     @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide 
+  *                            bus mode interrupt
+  *     @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *     @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT)
+{ 
+  /* Check the parameters */
+  assert_param(IS_SDIO_CLEAR_IT(SDIO_IT));
+   
+  SDIO->ICR = SDIO_IT;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/