mbed library sources for GR-PEACH rev.B.
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F100RB/stm32f10x_bkp.c
- Revision:
- 497:d54623194236
- Parent:
- 496:543871686697
- Child:
- 498:b3c41e21851c
--- a/targets/cmsis/TARGET_STM/TARGET_DISCO_F100RB/stm32f10x_bkp.c Tue Mar 24 09:00:08 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,323 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_bkp.c - * @author MCD Application Team - * @version V3.6.1 - * @date 05-March-2012 - * @brief This file provides all the BKP firmware functions. - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_bkp.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup BKP - * @brief BKP driver modules - * @{ - */ - -/** @defgroup BKP_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Defines - * @{ - */ - -/* ------------ BKP registers bit address in the alias region --------------- */ -#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) - -/* --- CR Register ----*/ - -/* Alias word address of TPAL bit */ -#define CR_OFFSET (BKP_OFFSET + 0x30) -#define TPAL_BitNumber 0x01 -#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) - -/* Alias word address of TPE bit */ -#define TPE_BitNumber 0x00 -#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of TPIE bit */ -#define CSR_OFFSET (BKP_OFFSET + 0x34) -#define TPIE_BitNumber 0x02 -#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) - -/* Alias word address of TIF bit */ -#define TIF_BitNumber 0x09 -#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) - -/* Alias word address of TEF bit */ -#define TEF_BitNumber 0x08 -#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) - -/* ---------------------- BKP registers bit mask ------------------------ */ - -/* RTCCR register bit mask */ -#define RTCCR_CAL_MASK ((uint16_t)0xFF80) -#define RTCCR_MASK ((uint16_t)0xFC7F) - -/** - * @} - */ - - -/** @defgroup BKP_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the BKP peripheral registers to their default reset values. - * @param None - * @retval None - */ -void BKP_DeInit(void) -{ - RCC_BackupResetCmd(ENABLE); - RCC_BackupResetCmd(DISABLE); -} - -/** - * @brief Configures the Tamper Pin active level. - * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. - * This parameter can be one of the following values: - * @arg BKP_TamperPinLevel_High: Tamper pin active on high level - * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level - * @retval None - */ -void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel) -{ - /* Check the parameters */ - assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); - *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel; -} - -/** - * @brief Enables or disables the Tamper Pin activation. - * @param NewState: new state of the Tamper Pin activation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void BKP_TamperPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Tamper Pin Interrupt. - * @param NewState: new state of the Tamper Pin Interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void BKP_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState; -} - -/** - * @brief Select the RTC output source to output on the Tamper pin. - * @param BKP_RTCOutputSource: specifies the RTC output source. - * This parameter can be one of the following values: - * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin. - * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency - * divided by 64 on the Tamper pin. - * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on - * the Tamper pin. - * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on - * the Tamper pin. - * @retval None - */ -void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource) -{ - uint16_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); - tmpreg = BKP->RTCCR; - /* Clear CCO, ASOE and ASOS bits */ - tmpreg &= RTCCR_MASK; - - /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ - tmpreg |= BKP_RTCOutputSource; - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/** - * @brief Sets RTC Clock Calibration value. - * @param CalibrationValue: specifies the RTC Clock Calibration value. - * This parameter must be a number between 0 and 0x7F. - * @retval None - */ -void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue) -{ - uint16_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); - tmpreg = BKP->RTCCR; - /* Clear CAL[6:0] bits */ - tmpreg &= RTCCR_CAL_MASK; - /* Set CAL[6:0] bits according to CalibrationValue value */ - tmpreg |= CalibrationValue; - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/** - * @brief Writes user data to the specified Data Backup Register. - * @param BKP_DR: specifies the Data Backup Register. - * This parameter can be BKP_DRx where x:[1, 42] - * @param Data: data to write - * @retval None - */ -void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - tmp = (uint32_t)BKP_BASE; - tmp += BKP_DR; - - *(__IO uint32_t *) tmp = Data; -} - -/** - * @brief Reads data from the specified Data Backup Register. - * @param BKP_DR: specifies the Data Backup Register. - * This parameter can be BKP_DRx where x:[1, 42] - * @retval The content of the specified Data Backup Register - */ -uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - tmp = (uint32_t)BKP_BASE; - tmp += BKP_DR; - - return (*(__IO uint16_t *) tmp); -} - -/** - * @brief Checks whether the Tamper Pin Event flag is set or not. - * @param None - * @retval The new state of the Tamper Pin Event flag (SET or RESET). - */ -FlagStatus BKP_GetFlagStatus(void) -{ - return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB); -} - -/** - * @brief Clears Tamper Pin Event pending flag. - * @param None - * @retval None - */ -void BKP_ClearFlag(void) -{ - /* Set CTE bit to clear Tamper Pin Event flag */ - BKP->CSR |= BKP_CSR_CTE; -} - -/** - * @brief Checks whether the Tamper Pin Interrupt has occurred or not. - * @param None - * @retval The new state of the Tamper Pin Interrupt (SET or RESET). - */ -ITStatus BKP_GetITStatus(void) -{ - return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB); -} - -/** - * @brief Clears Tamper Pin Interrupt pending bit. - * @param None - * @retval None - */ -void BKP_ClearITPendingBit(void) -{ - /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ - BKP->CSR |= BKP_CSR_CTI; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/