mbed-src - Lancaster University's (short term!) clone of mbe…

Lancaster University » Code » mbed-src

Lancaster University's (short term!) clone of mbed-src for micro:bit. This is a copy of the github branch https://github.com/lancaster-university/mbed-classic

Fork of mbed-src by mbed official

targets/cmsis/TARGET_STM/TARGET_STM32L4/stm32l4xx_hal_uart.h@610:813dcc80987e, 2015-08-14 (annotated)

Committer:: mbed_official
Date:: Fri Aug 14 13:15:17 2015 +0100
Revision:: 610:813dcc80987e

Synchronized with git revision 6d84db41c6833e0b9b024741eb0616a5f62d5599

Full URL: https://github.com/mbedmicro/mbed/commit/6d84db41c6833e0b9b024741eb0616a5f62d5599/

DISCO_F746NG - Improvements

Who changed what in which revision?

User	Revision	Line number	New contents of line
mbed_official	610:813dcc80987e	1	/**
mbed_official	610:813dcc80987e	2	******************************************************************************
mbed_official	610:813dcc80987e	3	* @file stm32l4xx_hal_uart.h
mbed_official	610:813dcc80987e	4	* @author MCD Application Team
mbed_official	610:813dcc80987e	5	* @version V1.0.0
mbed_official	610:813dcc80987e	6	* @date 26-June-2015
mbed_official	610:813dcc80987e	7	* @brief Header file of UART HAL module.
mbed_official	610:813dcc80987e	8	******************************************************************************
mbed_official	610:813dcc80987e	9	* @attention
mbed_official	610:813dcc80987e	10	*
mbed_official	610:813dcc80987e	11	* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
mbed_official	610:813dcc80987e	12	*
mbed_official	610:813dcc80987e	13	* Redistribution and use in source and binary forms, with or without modification,
mbed_official	610:813dcc80987e	14	* are permitted provided that the following conditions are met:
mbed_official	610:813dcc80987e	15	* 1. Redistributions of source code must retain the above copyright notice,
mbed_official	610:813dcc80987e	16	* this list of conditions and the following disclaimer.
mbed_official	610:813dcc80987e	17	* 2. Redistributions in binary form must reproduce the above copyright notice,
mbed_official	610:813dcc80987e	18	* this list of conditions and the following disclaimer in the documentation
mbed_official	610:813dcc80987e	19	* and/or other materials provided with the distribution.
mbed_official	610:813dcc80987e	20	* 3. Neither the name of STMicroelectronics nor the names of its contributors
mbed_official	610:813dcc80987e	21	* may be used to endorse or promote products derived from this software
mbed_official	610:813dcc80987e	22	* without specific prior written permission.
mbed_official	610:813dcc80987e	23	*
mbed_official	610:813dcc80987e	24	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
mbed_official	610:813dcc80987e	25	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
mbed_official	610:813dcc80987e	26	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
mbed_official	610:813dcc80987e	27	* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
mbed_official	610:813dcc80987e	28	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
mbed_official	610:813dcc80987e	29	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
mbed_official	610:813dcc80987e	30	* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
mbed_official	610:813dcc80987e	31	* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
mbed_official	610:813dcc80987e	32	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
mbed_official	610:813dcc80987e	33	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
mbed_official	610:813dcc80987e	34	*
mbed_official	610:813dcc80987e	35	******************************************************************************
mbed_official	610:813dcc80987e	36	*/
mbed_official	610:813dcc80987e	37
mbed_official	610:813dcc80987e	38	/* Define to prevent recursive inclusion -------------------------------------*/
mbed_official	610:813dcc80987e	39	#ifndef __STM32L4xx_HAL_UART_H
mbed_official	610:813dcc80987e	40	#define __STM32L4xx_HAL_UART_H
mbed_official	610:813dcc80987e	41
mbed_official	610:813dcc80987e	42	#ifdef __cplusplus
mbed_official	610:813dcc80987e	43	extern "C" {
mbed_official	610:813dcc80987e	44	#endif
mbed_official	610:813dcc80987e	45
mbed_official	610:813dcc80987e	46	/* Includes ------------------------------------------------------------------*/
mbed_official	610:813dcc80987e	47	#include "stm32l4xx_hal_def.h"
mbed_official	610:813dcc80987e	48
mbed_official	610:813dcc80987e	49	/** @addtogroup STM32L4xx_HAL_Driver
mbed_official	610:813dcc80987e	50	* @{
mbed_official	610:813dcc80987e	51	*/
mbed_official	610:813dcc80987e	52
mbed_official	610:813dcc80987e	53	/** @addtogroup UART
mbed_official	610:813dcc80987e	54	* @{
mbed_official	610:813dcc80987e	55	*/
mbed_official	610:813dcc80987e	56
mbed_official	610:813dcc80987e	57	/* Exported types ------------------------------------------------------------*/
mbed_official	610:813dcc80987e	58	/** @defgroup UART_Exported_Types UART Exported Types
mbed_official	610:813dcc80987e	59	* @{
mbed_official	610:813dcc80987e	60	*/
mbed_official	610:813dcc80987e	61
mbed_official	610:813dcc80987e	62	/**
mbed_official	610:813dcc80987e	63	* @brief UART Init Structure definition
mbed_official	610:813dcc80987e	64	*/
mbed_official	610:813dcc80987e	65	typedef struct
mbed_official	610:813dcc80987e	66	{
mbed_official	610:813dcc80987e	67	uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
mbed_official	610:813dcc80987e	68	The baud rate register is computed using the following formula:
mbed_official	610:813dcc80987e	69	- If oversampling is 16 or in LIN mode,
mbed_official	610:813dcc80987e	70	Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
mbed_official	610:813dcc80987e	71	- If oversampling is 8,
mbed_official	610:813dcc80987e	72	- - Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
mbed_official	610:813dcc80987e	73	- - Baud Rate Register[3] = 0
mbed_official	610:813dcc80987e	74	- - Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
mbed_official	610:813dcc80987e	75
mbed_official	610:813dcc80987e	76	uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
mbed_official	610:813dcc80987e	77	This parameter can be a value of @ref UARTEx_Word_Length. */
mbed_official	610:813dcc80987e	78
mbed_official	610:813dcc80987e	79	uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
mbed_official	610:813dcc80987e	80	This parameter can be a value of @ref UART_Stop_Bits. */
mbed_official	610:813dcc80987e	81
mbed_official	610:813dcc80987e	82	uint32_t Parity; /*!< Specifies the parity mode.
mbed_official	610:813dcc80987e	83	This parameter can be a value of @ref UART_Parity
mbed_official	610:813dcc80987e	84	@note When parity is enabled, the computed parity is inserted
mbed_official	610:813dcc80987e	85	at the MSB position of the transmitted data (9th bit when
mbed_official	610:813dcc80987e	86	the word length is set to 9 data bits; 8th bit when the
mbed_official	610:813dcc80987e	87	word length is set to 8 data bits). */
mbed_official	610:813dcc80987e	88
mbed_official	610:813dcc80987e	89	uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
mbed_official	610:813dcc80987e	90	This parameter can be a value of @ref UART_Mode. */
mbed_official	610:813dcc80987e	91
mbed_official	610:813dcc80987e	92	uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
mbed_official	610:813dcc80987e	93	or disabled.
mbed_official	610:813dcc80987e	94	This parameter can be a value of @ref UART_Hardware_Flow_Control. */
mbed_official	610:813dcc80987e	95
mbed_official	610:813dcc80987e	96	uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to f_PCLK/8).
mbed_official	610:813dcc80987e	97	This parameter can be a value of @ref UART_Over_Sampling. */
mbed_official	610:813dcc80987e	98
mbed_official	610:813dcc80987e	99	uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
mbed_official	610:813dcc80987e	100	Selecting the single sample method increases the receiver tolerance to clock
mbed_official	610:813dcc80987e	101	deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
mbed_official	610:813dcc80987e	102	}UART_InitTypeDef;
mbed_official	610:813dcc80987e	103
mbed_official	610:813dcc80987e	104	/**
mbed_official	610:813dcc80987e	105	* @brief UART Advanced Features initalization structure definition
mbed_official	610:813dcc80987e	106	*/
mbed_official	610:813dcc80987e	107	typedef struct
mbed_official	610:813dcc80987e	108	{
mbed_official	610:813dcc80987e	109	uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
mbed_official	610:813dcc80987e	110	Advanced Features may be initialized at the same time .
mbed_official	610:813dcc80987e	111	This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type. */
mbed_official	610:813dcc80987e	112
mbed_official	610:813dcc80987e	113	uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
mbed_official	610:813dcc80987e	114	This parameter can be a value of @ref UART_Tx_Inv. */
mbed_official	610:813dcc80987e	115
mbed_official	610:813dcc80987e	116	uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
mbed_official	610:813dcc80987e	117	This parameter can be a value of @ref UART_Rx_Inv. */
mbed_official	610:813dcc80987e	118
mbed_official	610:813dcc80987e	119	uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
mbed_official	610:813dcc80987e	120	vs negative/inverted logic).
mbed_official	610:813dcc80987e	121	This parameter can be a value of @ref UART_Data_Inv. */
mbed_official	610:813dcc80987e	122
mbed_official	610:813dcc80987e	123	uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
mbed_official	610:813dcc80987e	124	This parameter can be a value of @ref UART_Rx_Tx_Swap. */
mbed_official	610:813dcc80987e	125
mbed_official	610:813dcc80987e	126	uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
mbed_official	610:813dcc80987e	127	This parameter can be a value of @ref UART_Overrun_Disable. */
mbed_official	610:813dcc80987e	128
mbed_official	610:813dcc80987e	129	uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
mbed_official	610:813dcc80987e	130	This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */
mbed_official	610:813dcc80987e	131
mbed_official	610:813dcc80987e	132	uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
mbed_official	610:813dcc80987e	133	This parameter can be a value of @ref UART_AutoBaudRate_Enable */
mbed_official	610:813dcc80987e	134
mbed_official	610:813dcc80987e	135	uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
mbed_official	610:813dcc80987e	136	detection is carried out.
mbed_official	610:813dcc80987e	137	This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */
mbed_official	610:813dcc80987e	138
mbed_official	610:813dcc80987e	139	uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
mbed_official	610:813dcc80987e	140	This parameter can be a value of @ref UART_MSB_First. */
mbed_official	610:813dcc80987e	141	} UART_AdvFeatureInitTypeDef;
mbed_official	610:813dcc80987e	142
mbed_official	610:813dcc80987e	143
mbed_official	610:813dcc80987e	144
mbed_official	610:813dcc80987e	145	/**
mbed_official	610:813dcc80987e	146	* @brief HAL UART State structures definition
mbed_official	610:813dcc80987e	147	*/
mbed_official	610:813dcc80987e	148	typedef enum
mbed_official	610:813dcc80987e	149	{
mbed_official	610:813dcc80987e	150	HAL_UART_STATE_RESET = 0x00, /!< Peripheral is not initialized /
mbed_official	610:813dcc80987e	151	HAL_UART_STATE_READY = 0x01, /!< Peripheral Initialized and ready for use /
mbed_official	610:813dcc80987e	152	HAL_UART_STATE_BUSY = 0x02, /!< an internal process is ongoing /
mbed_official	610:813dcc80987e	153	HAL_UART_STATE_BUSY_TX = 0x12, /!< Data Transmission process is ongoing /
mbed_official	610:813dcc80987e	154	HAL_UART_STATE_BUSY_RX = 0x22, /!< Data Reception process is ongoing /
mbed_official	610:813dcc80987e	155	HAL_UART_STATE_BUSY_TX_RX = 0x32, /!< Data Transmission and Reception process is ongoing /
mbed_official	610:813dcc80987e	156	HAL_UART_STATE_TIMEOUT = 0x03, /!< Timeout state /
mbed_official	610:813dcc80987e	157	HAL_UART_STATE_ERROR = 0x04 /!< Error /
mbed_official	610:813dcc80987e	158	}HAL_UART_StateTypeDef;
mbed_official	610:813dcc80987e	159
mbed_official	610:813dcc80987e	160	/**
mbed_official	610:813dcc80987e	161	* @brief HAL UART Error Code structure definition
mbed_official	610:813dcc80987e	162	*/
mbed_official	610:813dcc80987e	163	typedef enum
mbed_official	610:813dcc80987e	164	{
mbed_official	610:813dcc80987e	165	HAL_UART_ERROR_NONE = 0x00, /!< No error /
mbed_official	610:813dcc80987e	166	HAL_UART_ERROR_PE = 0x01, /!< Parity error /
mbed_official	610:813dcc80987e	167	HAL_UART_ERROR_NE = 0x02, /!< Noise error /
mbed_official	610:813dcc80987e	168	HAL_UART_ERROR_FE = 0x04, /!< frame error /
mbed_official	610:813dcc80987e	169	HAL_UART_ERROR_ORE = 0x08, /!< Overrun error /
mbed_official	610:813dcc80987e	170	HAL_UART_ERROR_DMA = 0x10 /!< DMA transfer error /
mbed_official	610:813dcc80987e	171	}HAL_UART_ErrorTypeDef;
mbed_official	610:813dcc80987e	172
mbed_official	610:813dcc80987e	173	/**
mbed_official	610:813dcc80987e	174	* @brief UART clock sources definition
mbed_official	610:813dcc80987e	175	*/
mbed_official	610:813dcc80987e	176	typedef enum
mbed_official	610:813dcc80987e	177	{
mbed_official	610:813dcc80987e	178	UART_CLOCKSOURCE_PCLK1 = 0x00, /!< PCLK1 clock source /
mbed_official	610:813dcc80987e	179	UART_CLOCKSOURCE_PCLK2 = 0x01, /!< PCLK2 clock source /
mbed_official	610:813dcc80987e	180	UART_CLOCKSOURCE_HSI = 0x02, /!< HSI clock source /
mbed_official	610:813dcc80987e	181	UART_CLOCKSOURCE_SYSCLK = 0x04, /!< SYSCLK clock source /
mbed_official	610:813dcc80987e	182	UART_CLOCKSOURCE_LSE = 0x08, /!< LSE clock source /
mbed_official	610:813dcc80987e	183	UART_CLOCKSOURCE_UNDEFINED = 0x10 /!< Undefined clock source /
mbed_official	610:813dcc80987e	184	}UART_ClockSourceTypeDef;
mbed_official	610:813dcc80987e	185
mbed_official	610:813dcc80987e	186	/**
mbed_official	610:813dcc80987e	187	* @brief UART handle Structure definition
mbed_official	610:813dcc80987e	188	*/
mbed_official	610:813dcc80987e	189	typedef struct
mbed_official	610:813dcc80987e	190	{
mbed_official	610:813dcc80987e	191	USART_TypeDef Instance; /!< UART registers base address */
mbed_official	610:813dcc80987e	192
mbed_official	610:813dcc80987e	193	UART_InitTypeDef Init; /!< UART communication parameters /
mbed_official	610:813dcc80987e	194
mbed_official	610:813dcc80987e	195	UART_AdvFeatureInitTypeDef AdvancedInit; /!< UART Advanced Features initialization parameters /
mbed_official	610:813dcc80987e	196
mbed_official	610:813dcc80987e	197	uint8_t pTxBuffPtr; /!< Pointer to UART Tx transfer Buffer */
mbed_official	610:813dcc80987e	198
mbed_official	610:813dcc80987e	199	uint16_t TxXferSize; /!< UART Tx Transfer size /
mbed_official	610:813dcc80987e	200
mbed_official	610:813dcc80987e	201	uint16_t TxXferCount; /!< UART Tx Transfer Counter /
mbed_official	610:813dcc80987e	202
mbed_official	610:813dcc80987e	203	uint8_t pRxBuffPtr; /!< Pointer to UART Rx transfer Buffer */
mbed_official	610:813dcc80987e	204
mbed_official	610:813dcc80987e	205	uint16_t RxXferSize; /!< UART Rx Transfer size /
mbed_official	610:813dcc80987e	206
mbed_official	610:813dcc80987e	207	uint16_t RxXferCount; /!< UART Rx Transfer Counter /
mbed_official	610:813dcc80987e	208
mbed_official	610:813dcc80987e	209	uint16_t Mask; /!< UART Rx RDR register mask /
mbed_official	610:813dcc80987e	210
mbed_official	610:813dcc80987e	211	DMA_HandleTypeDef hdmatx; /!< UART Tx DMA Handle parameters */
mbed_official	610:813dcc80987e	212
mbed_official	610:813dcc80987e	213	DMA_HandleTypeDef hdmarx; /!< UART Rx DMA Handle parameters */
mbed_official	610:813dcc80987e	214
mbed_official	610:813dcc80987e	215	HAL_LockTypeDef Lock; /!< Locking object /
mbed_official	610:813dcc80987e	216
mbed_official	610:813dcc80987e	217	__IO HAL_UART_StateTypeDef State; /!< UART communication state /
mbed_official	610:813dcc80987e	218
mbed_official	610:813dcc80987e	219	__IO uint32_t ErrorCode; /!< UART Error code /
mbed_official	610:813dcc80987e	220
mbed_official	610:813dcc80987e	221	}UART_HandleTypeDef;
mbed_official	610:813dcc80987e	222
mbed_official	610:813dcc80987e	223	/**
mbed_official	610:813dcc80987e	224	* @}
mbed_official	610:813dcc80987e	225	*/
mbed_official	610:813dcc80987e	226
mbed_official	610:813dcc80987e	227	/* Exported constants --------------------------------------------------------*/
mbed_official	610:813dcc80987e	228	/** @defgroup UART_Exported_Constants UART Exported Constants
mbed_official	610:813dcc80987e	229	* @{
mbed_official	610:813dcc80987e	230	*/
mbed_official	610:813dcc80987e	231
mbed_official	610:813dcc80987e	232	/** @defgroup UART_Stop_Bits UART Number of Stop Bits
mbed_official	610:813dcc80987e	233	* @{
mbed_official	610:813dcc80987e	234	*/
mbed_official	610:813dcc80987e	235	#define UART_STOPBITS_1 ((uint32_t)0x00000000) /!< UART frame with 1 stop bit /
mbed_official	610:813dcc80987e	236	#define UART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 \| USART_CR2_STOP_1)) /!< UART frame with 1.5 stop bits /
mbed_official	610:813dcc80987e	237	#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) /!< UART frame with 2 stop bits /
mbed_official	610:813dcc80987e	238	/**
mbed_official	610:813dcc80987e	239	* @}
mbed_official	610:813dcc80987e	240	*/
mbed_official	610:813dcc80987e	241
mbed_official	610:813dcc80987e	242	/** @defgroup UART_Parity UART Parity
mbed_official	610:813dcc80987e	243	* @{
mbed_official	610:813dcc80987e	244	*/
mbed_official	610:813dcc80987e	245	#define UART_PARITY_NONE ((uint32_t)0x00000000) /!< No parity /
mbed_official	610:813dcc80987e	246	#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /!< Even parity /
mbed_official	610:813dcc80987e	247	#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE \| USART_CR1_PS)) /!< Odd parity /
mbed_official	610:813dcc80987e	248	/**
mbed_official	610:813dcc80987e	249	* @}
mbed_official	610:813dcc80987e	250	*/
mbed_official	610:813dcc80987e	251
mbed_official	610:813dcc80987e	252	/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
mbed_official	610:813dcc80987e	253	* @{
mbed_official	610:813dcc80987e	254	*/
mbed_official	610:813dcc80987e	255	#define UART_HWCONTROL_NONE ((uint32_t)0x00000000) /!< No hardware control /
mbed_official	610:813dcc80987e	256	#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) /!< Request To Send /
mbed_official	610:813dcc80987e	257	#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) /!< Clear To Send /
mbed_official	610:813dcc80987e	258	#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE \| USART_CR3_CTSE)) /!< Request and Clear To Send /
mbed_official	610:813dcc80987e	259	/**
mbed_official	610:813dcc80987e	260	* @}
mbed_official	610:813dcc80987e	261	*/
mbed_official	610:813dcc80987e	262
mbed_official	610:813dcc80987e	263	/** @defgroup UART_Mode UART Transfer Mode
mbed_official	610:813dcc80987e	264	* @{
mbed_official	610:813dcc80987e	265	*/
mbed_official	610:813dcc80987e	266	#define UART_MODE_RX ((uint32_t)USART_CR1_RE) /!< RX mode /
mbed_official	610:813dcc80987e	267	#define UART_MODE_TX ((uint32_t)USART_CR1_TE) /!< TX mode /
mbed_official	610:813dcc80987e	268	#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE \|USART_CR1_RE)) /!< RX and TX mode /
mbed_official	610:813dcc80987e	269	/**
mbed_official	610:813dcc80987e	270	* @}
mbed_official	610:813dcc80987e	271	*/
mbed_official	610:813dcc80987e	272
mbed_official	610:813dcc80987e	273	/** @defgroup UART_State UART State
mbed_official	610:813dcc80987e	274	* @{
mbed_official	610:813dcc80987e	275	*/
mbed_official	610:813dcc80987e	276	#define UART_STATE_DISABLE ((uint32_t)0x00000000) /!< UART disabled /
mbed_official	610:813dcc80987e	277	#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) /!< UART enabled /
mbed_official	610:813dcc80987e	278	/**
mbed_official	610:813dcc80987e	279	* @}
mbed_official	610:813dcc80987e	280	*/
mbed_official	610:813dcc80987e	281
mbed_official	610:813dcc80987e	282	/** @defgroup UART_Over_Sampling UART Over Sampling
mbed_official	610:813dcc80987e	283	* @{
mbed_official	610:813dcc80987e	284	*/
mbed_official	610:813dcc80987e	285	#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000) /!< Oversampling by 16 /
mbed_official	610:813dcc80987e	286	#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) /!< Oversampling by 8 /
mbed_official	610:813dcc80987e	287	/**
mbed_official	610:813dcc80987e	288	* @}
mbed_official	610:813dcc80987e	289	*/
mbed_official	610:813dcc80987e	290
mbed_official	610:813dcc80987e	291	/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
mbed_official	610:813dcc80987e	292	* @{
mbed_official	610:813dcc80987e	293	*/
mbed_official	610:813dcc80987e	294	#define UART_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000) /!< One-bit sampling disable /
mbed_official	610:813dcc80987e	295	#define UART_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /!< One-bit sampling enable /
mbed_official	610:813dcc80987e	296	/**
mbed_official	610:813dcc80987e	297	* @}
mbed_official	610:813dcc80987e	298	*/
mbed_official	610:813dcc80987e	299
mbed_official	610:813dcc80987e	300	/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
mbed_official	610:813dcc80987e	301	* @{
mbed_official	610:813dcc80987e	302	*/
mbed_official	610:813dcc80987e	303	#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000) /!< Auto Baud rate detection on start bit /
mbed_official	610:813dcc80987e	304	#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /!< Auto Baud rate detection on falling edge /
mbed_official	610:813dcc80987e	305	#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) /!< Auto Baud rate detection on 0x7F frame detection /
mbed_official	610:813dcc80987e	306	#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) /!< Auto Baud rate detection on 0x55 frame detection /
mbed_official	610:813dcc80987e	307	/**
mbed_official	610:813dcc80987e	308	* @}
mbed_official	610:813dcc80987e	309	*/
mbed_official	610:813dcc80987e	310
mbed_official	610:813dcc80987e	311	/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
mbed_official	610:813dcc80987e	312	* @{
mbed_official	610:813dcc80987e	313	*/
mbed_official	610:813dcc80987e	314	#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000) /!< UART receiver timeout disable /
mbed_official	610:813dcc80987e	315	#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) /!< UART receiver timeout enable /
mbed_official	610:813dcc80987e	316	/**
mbed_official	610:813dcc80987e	317	* @}
mbed_official	610:813dcc80987e	318	*/
mbed_official	610:813dcc80987e	319
mbed_official	610:813dcc80987e	320	/** @defgroup UART_LIN UART Local Interconnection Network mode
mbed_official	610:813dcc80987e	321	* @{
mbed_official	610:813dcc80987e	322	*/
mbed_official	610:813dcc80987e	323	#define UART_LIN_DISABLE ((uint32_t)0x00000000) /!< Local Interconnect Network disable /
mbed_official	610:813dcc80987e	324	#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) /!< Local Interconnect Network enable /
mbed_official	610:813dcc80987e	325	/**
mbed_official	610:813dcc80987e	326	* @}
mbed_official	610:813dcc80987e	327	*/
mbed_official	610:813dcc80987e	328
mbed_official	610:813dcc80987e	329	/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
mbed_official	610:813dcc80987e	330	* @{
mbed_official	610:813dcc80987e	331	*/
mbed_official	610:813dcc80987e	332	#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) /!< LIN 10-bit break detection length /
mbed_official	610:813dcc80987e	333	#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) /!< LIN 11-bit break detection length /
mbed_official	610:813dcc80987e	334	/**
mbed_official	610:813dcc80987e	335	* @}
mbed_official	610:813dcc80987e	336	*/
mbed_official	610:813dcc80987e	337
mbed_official	610:813dcc80987e	338	/** @defgroup UART_DMA_Tx UART DMA Tx
mbed_official	610:813dcc80987e	339	* @{
mbed_official	610:813dcc80987e	340	*/
mbed_official	610:813dcc80987e	341	#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000) /!< UART DMA TX disabled /
mbed_official	610:813dcc80987e	342	#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) /!< UART DMA TX enabled /
mbed_official	610:813dcc80987e	343	/**
mbed_official	610:813dcc80987e	344	* @}
mbed_official	610:813dcc80987e	345	*/
mbed_official	610:813dcc80987e	346
mbed_official	610:813dcc80987e	347	/** @defgroup UART_DMA_Rx UART DMA Rx
mbed_official	610:813dcc80987e	348	* @{
mbed_official	610:813dcc80987e	349	*/
mbed_official	610:813dcc80987e	350	#define UART_DMA_RX_DISABLE ((uint32_t)0x0000) /!< UART DMA RX disabled /
mbed_official	610:813dcc80987e	351	#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) /!< UART DMA RX enabled /
mbed_official	610:813dcc80987e	352	/**
mbed_official	610:813dcc80987e	353	* @}
mbed_official	610:813dcc80987e	354	*/
mbed_official	610:813dcc80987e	355
mbed_official	610:813dcc80987e	356	/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
mbed_official	610:813dcc80987e	357	* @{
mbed_official	610:813dcc80987e	358	*/
mbed_official	610:813dcc80987e	359	#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000) /!< UART half-duplex disabled /
mbed_official	610:813dcc80987e	360	#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL) /!< UART half-duplex enabled /
mbed_official	610:813dcc80987e	361	/**
mbed_official	610:813dcc80987e	362	* @}
mbed_official	610:813dcc80987e	363	*/
mbed_official	610:813dcc80987e	364
mbed_official	610:813dcc80987e	365	/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
mbed_official	610:813dcc80987e	366	* @{
mbed_official	610:813dcc80987e	367	*/
mbed_official	610:813dcc80987e	368	#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000) /!< UART wake-up on idle line /
mbed_official	610:813dcc80987e	369	#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE) /!< UART wake-up on address mark /
mbed_official	610:813dcc80987e	370	/**
mbed_official	610:813dcc80987e	371	* @}
mbed_official	610:813dcc80987e	372	*/
mbed_official	610:813dcc80987e	373
mbed_official	610:813dcc80987e	374	/** @defgroup UART_Request_Parameters UART Request Parameters
mbed_official	610:813dcc80987e	375	* @{
mbed_official	610:813dcc80987e	376	*/
mbed_official	610:813dcc80987e	377	#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /!< Auto-Baud Rate Request /
mbed_official	610:813dcc80987e	378	#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /!< Send Break Request /
mbed_official	610:813dcc80987e	379	#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /!< Mute Mode Request /
mbed_official	610:813dcc80987e	380	#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /!< Receive Data flush Request /
mbed_official	610:813dcc80987e	381	#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /!< Transmit data flush Request /
mbed_official	610:813dcc80987e	382	/**
mbed_official	610:813dcc80987e	383	* @}
mbed_official	610:813dcc80987e	384	*/
mbed_official	610:813dcc80987e	385
mbed_official	610:813dcc80987e	386	/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
mbed_official	610:813dcc80987e	387	* @{
mbed_official	610:813dcc80987e	388	*/
mbed_official	610:813dcc80987e	389	#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000) /!< No advanced feature initialization /
mbed_official	610:813dcc80987e	390	#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001) /!< TX pin active level inversion /
mbed_official	610:813dcc80987e	391	#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002) /!< RX pin active level inversion /
mbed_official	610:813dcc80987e	392	#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004) /!< Binary data inversion /
mbed_official	610:813dcc80987e	393	#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008) /!< TX/RX pins swap /
mbed_official	610:813dcc80987e	394	#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010) /!< RX overrun disable /
mbed_official	610:813dcc80987e	395	#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020) /!< DMA disable on Reception Error /
mbed_official	610:813dcc80987e	396	#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040) /!< Auto Baud rate detection initialization /
mbed_official	610:813dcc80987e	397	#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080) /!< Most significant bit sent/received first /
mbed_official	610:813dcc80987e	398	/**
mbed_official	610:813dcc80987e	399	* @}
mbed_official	610:813dcc80987e	400	*/
mbed_official	610:813dcc80987e	401
mbed_official	610:813dcc80987e	402	/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
mbed_official	610:813dcc80987e	403	* @{
mbed_official	610:813dcc80987e	404	*/
mbed_official	610:813dcc80987e	405	#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000) /!< TX pin active level inversion disable /
mbed_official	610:813dcc80987e	406	#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) /!< TX pin active level inversion enable /
mbed_official	610:813dcc80987e	407	/**
mbed_official	610:813dcc80987e	408	* @}
mbed_official	610:813dcc80987e	409	*/
mbed_official	610:813dcc80987e	410
mbed_official	610:813dcc80987e	411	/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
mbed_official	610:813dcc80987e	412	* @{
mbed_official	610:813dcc80987e	413	*/
mbed_official	610:813dcc80987e	414	#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000) /!< RX pin active level inversion disable /
mbed_official	610:813dcc80987e	415	#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) /!< RX pin active level inversion enable /
mbed_official	610:813dcc80987e	416	/**
mbed_official	610:813dcc80987e	417	* @}
mbed_official	610:813dcc80987e	418	*/
mbed_official	610:813dcc80987e	419
mbed_official	610:813dcc80987e	420	/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
mbed_official	610:813dcc80987e	421	* @{
mbed_official	610:813dcc80987e	422	*/
mbed_official	610:813dcc80987e	423	#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000) /!< Binary data inversion disable /
mbed_official	610:813dcc80987e	424	#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) /!< Binary data inversion enable /
mbed_official	610:813dcc80987e	425	/**
mbed_official	610:813dcc80987e	426	* @}
mbed_official	610:813dcc80987e	427	*/
mbed_official	610:813dcc80987e	428
mbed_official	610:813dcc80987e	429	/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
mbed_official	610:813dcc80987e	430	* @{
mbed_official	610:813dcc80987e	431	*/
mbed_official	610:813dcc80987e	432	#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000) /!< TX/RX pins swap disable /
mbed_official	610:813dcc80987e	433	#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) /!< TX/RX pins swap enable /
mbed_official	610:813dcc80987e	434	/**
mbed_official	610:813dcc80987e	435	* @}
mbed_official	610:813dcc80987e	436	*/
mbed_official	610:813dcc80987e	437
mbed_official	610:813dcc80987e	438	/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
mbed_official	610:813dcc80987e	439	* @{
mbed_official	610:813dcc80987e	440	*/
mbed_official	610:813dcc80987e	441	#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000) /!< RX overrun enable /
mbed_official	610:813dcc80987e	442	#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) /!< RX overrun disable /
mbed_official	610:813dcc80987e	443	/**
mbed_official	610:813dcc80987e	444	* @}
mbed_official	610:813dcc80987e	445	*/
mbed_official	610:813dcc80987e	446
mbed_official	610:813dcc80987e	447	/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
mbed_official	610:813dcc80987e	448	* @{
mbed_official	610:813dcc80987e	449	*/
mbed_official	610:813dcc80987e	450	#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000) /!< RX Auto Baud rate detection enable /
mbed_official	610:813dcc80987e	451	#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN) /!< RX Auto Baud rate detection disable /
mbed_official	610:813dcc80987e	452	/**
mbed_official	610:813dcc80987e	453	* @}
mbed_official	610:813dcc80987e	454	*/
mbed_official	610:813dcc80987e	455
mbed_official	610:813dcc80987e	456	/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
mbed_official	610:813dcc80987e	457	* @{
mbed_official	610:813dcc80987e	458	*/
mbed_official	610:813dcc80987e	459	#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000) /!< DMA enable on Reception Error /
mbed_official	610:813dcc80987e	460	#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) /!< DMA disable on Reception Error /
mbed_official	610:813dcc80987e	461	/**
mbed_official	610:813dcc80987e	462	* @}
mbed_official	610:813dcc80987e	463	*/
mbed_official	610:813dcc80987e	464
mbed_official	610:813dcc80987e	465	/** @defgroup UART_MSB_First UART Advanced Feature MSB First
mbed_official	610:813dcc80987e	466	* @{
mbed_official	610:813dcc80987e	467	*/
mbed_official	610:813dcc80987e	468	#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000) /!< Most significant bit sent/received first disable /
mbed_official	610:813dcc80987e	469	#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) /!< Most significant bit sent/received first enable /
mbed_official	610:813dcc80987e	470	/**
mbed_official	610:813dcc80987e	471	* @}
mbed_official	610:813dcc80987e	472	*/
mbed_official	610:813dcc80987e	473
mbed_official	610:813dcc80987e	474	/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
mbed_official	610:813dcc80987e	475	* @{
mbed_official	610:813dcc80987e	476	*/
mbed_official	610:813dcc80987e	477	#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) /!< UART stop mode disable /
mbed_official	610:813dcc80987e	478	#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) /!< UART stop mode enable /
mbed_official	610:813dcc80987e	479	/**
mbed_official	610:813dcc80987e	480	* @}
mbed_official	610:813dcc80987e	481	*/
mbed_official	610:813dcc80987e	482
mbed_official	610:813dcc80987e	483	/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
mbed_official	610:813dcc80987e	484	* @{
mbed_official	610:813dcc80987e	485	*/
mbed_official	610:813dcc80987e	486	#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000) /!< UART mute mode disable /
mbed_official	610:813dcc80987e	487	#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME) /!< UART mute mode enable /
mbed_official	610:813dcc80987e	488	/**
mbed_official	610:813dcc80987e	489	* @}
mbed_official	610:813dcc80987e	490	*/
mbed_official	610:813dcc80987e	491
mbed_official	610:813dcc80987e	492	/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
mbed_official	610:813dcc80987e	493	* @{
mbed_official	610:813dcc80987e	494	*/
mbed_official	610:813dcc80987e	495	#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24) /!< UART address-matching LSB position in CR2 register /
mbed_official	610:813dcc80987e	496	/**
mbed_official	610:813dcc80987e	497	* @}
mbed_official	610:813dcc80987e	498	*/
mbed_official	610:813dcc80987e	499
mbed_official	610:813dcc80987e	500	/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
mbed_official	610:813dcc80987e	501	* @{
mbed_official	610:813dcc80987e	502	*/
mbed_official	610:813dcc80987e	503	#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x00000000) /!< UART wake-up on address /
mbed_official	610:813dcc80987e	504	#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) /!< UART wake-up on start bit /
mbed_official	610:813dcc80987e	505	#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) /!< UART wake-up on receive data register not empty /
mbed_official	610:813dcc80987e	506	/**
mbed_official	610:813dcc80987e	507	* @}
mbed_official	610:813dcc80987e	508	*/
mbed_official	610:813dcc80987e	509
mbed_official	610:813dcc80987e	510	/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
mbed_official	610:813dcc80987e	511	* @{
mbed_official	610:813dcc80987e	512	*/
mbed_official	610:813dcc80987e	513	#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000) /!< Driver enable signal is active high /
mbed_official	610:813dcc80987e	514	#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP) /!< Driver enable signal is active low /
mbed_official	610:813dcc80987e	515	/**
mbed_official	610:813dcc80987e	516	* @}
mbed_official	610:813dcc80987e	517	*/
mbed_official	610:813dcc80987e	518
mbed_official	610:813dcc80987e	519	/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
mbed_official	610:813dcc80987e	520	* @{
mbed_official	610:813dcc80987e	521	*/
mbed_official	610:813dcc80987e	522	#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21) /!< UART Driver Enable assertion time LSB position in CR1 register /
mbed_official	610:813dcc80987e	523	/**
mbed_official	610:813dcc80987e	524	* @}
mbed_official	610:813dcc80987e	525	*/
mbed_official	610:813dcc80987e	526
mbed_official	610:813dcc80987e	527	/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
mbed_official	610:813dcc80987e	528	* @{
mbed_official	610:813dcc80987e	529	*/
mbed_official	610:813dcc80987e	530	#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16) /!< UART Driver Enable de-assertion time LSB position in CR1 register /
mbed_official	610:813dcc80987e	531	/**
mbed_official	610:813dcc80987e	532	* @}
mbed_official	610:813dcc80987e	533	*/
mbed_official	610:813dcc80987e	534
mbed_official	610:813dcc80987e	535	/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
mbed_official	610:813dcc80987e	536	* @{
mbed_official	610:813dcc80987e	537	*/
mbed_official	610:813dcc80987e	538	#define UART_IT_MASK ((uint32_t)0x001F) /!< UART interruptions flags mask /
mbed_official	610:813dcc80987e	539	/**
mbed_official	610:813dcc80987e	540	* @}
mbed_official	610:813dcc80987e	541	*/
mbed_official	610:813dcc80987e	542
mbed_official	610:813dcc80987e	543	/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
mbed_official	610:813dcc80987e	544	* @{
mbed_official	610:813dcc80987e	545	*/
mbed_official	610:813dcc80987e	546	#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF /!< UART polling-based communications time-out value /
mbed_official	610:813dcc80987e	547	/**
mbed_official	610:813dcc80987e	548	* @}
mbed_official	610:813dcc80987e	549	*/
mbed_official	610:813dcc80987e	550
mbed_official	610:813dcc80987e	551	/** @defgroup UART_Flags UART Status Flags
mbed_official	610:813dcc80987e	552	* Elements values convention: 0xXXXX
mbed_official	610:813dcc80987e	553	* - 0xXXXX : Flag mask in the ISR register
mbed_official	610:813dcc80987e	554	* @{
mbed_official	610:813dcc80987e	555	*/
mbed_official	610:813dcc80987e	556	#define UART_FLAG_REACK ((uint32_t)0x00400000) /!< UART receive enable acknowledge flag /
mbed_official	610:813dcc80987e	557	#define UART_FLAG_TEACK ((uint32_t)0x00200000) /!< UART transmit enable acknowledge flag /
mbed_official	610:813dcc80987e	558	#define UART_FLAG_WUF ((uint32_t)0x00100000) /!< UART wake-up from stop mode flag /
mbed_official	610:813dcc80987e	559	#define UART_FLAG_RWU ((uint32_t)0x00080000) /!< UART receiver wake-up from mute mode flag /
mbed_official	610:813dcc80987e	560	#define UART_FLAG_SBKF ((uint32_t)0x00040000) /!< UART send break flag /
mbed_official	610:813dcc80987e	561	#define UART_FLAG_CMF ((uint32_t)0x00020000) /!< UART character match flag /
mbed_official	610:813dcc80987e	562	#define UART_FLAG_BUSY ((uint32_t)0x00010000) /!< UART busy flag /
mbed_official	610:813dcc80987e	563	#define UART_FLAG_ABRF ((uint32_t)0x00008000) /!< UART auto Baud rate flag /
mbed_official	610:813dcc80987e	564	#define UART_FLAG_ABRE ((uint32_t)0x00004000) /!< UART uto Baud rate error /
mbed_official	610:813dcc80987e	565	#define UART_FLAG_EOBF ((uint32_t)0x00001000) /!< UART end of block flag /
mbed_official	610:813dcc80987e	566	#define UART_FLAG_RTOF ((uint32_t)0x00000800) /!< UART receiver timeout flag /
mbed_official	610:813dcc80987e	567	#define UART_FLAG_CTS ((uint32_t)0x00000400) /!< UART clear to send flag /
mbed_official	610:813dcc80987e	568	#define UART_FLAG_CTSIF ((uint32_t)0x00000200) /!< UART clear to send interrupt flag /
mbed_official	610:813dcc80987e	569	#define UART_FLAG_LBDF ((uint32_t)0x00000100) /!< UART LIN break detection flag /
mbed_official	610:813dcc80987e	570	#define UART_FLAG_TXE ((uint32_t)0x00000080) /!< UART transmit data register empty /
mbed_official	610:813dcc80987e	571	#define UART_FLAG_TC ((uint32_t)0x00000040) /!< UART transmission complete /
mbed_official	610:813dcc80987e	572	#define UART_FLAG_RXNE ((uint32_t)0x00000020) /!< UART read data register not empty /
mbed_official	610:813dcc80987e	573	#define UART_FLAG_IDLE ((uint32_t)0x00000010) /!< UART idle flag /
mbed_official	610:813dcc80987e	574	#define UART_FLAG_ORE ((uint32_t)0x00000008) /!< UART overrun error /
mbed_official	610:813dcc80987e	575	#define UART_FLAG_NE ((uint32_t)0x00000004) /!< UART noise error /
mbed_official	610:813dcc80987e	576	#define UART_FLAG_FE ((uint32_t)0x00000002) /!< UART frame error /
mbed_official	610:813dcc80987e	577	#define UART_FLAG_PE ((uint32_t)0x00000001) /!< UART parity error /
mbed_official	610:813dcc80987e	578	/**
mbed_official	610:813dcc80987e	579	* @}
mbed_official	610:813dcc80987e	580	*/
mbed_official	610:813dcc80987e	581
mbed_official	610:813dcc80987e	582	/** @defgroup UART_Interrupt_definition UART Interrupts Definition
mbed_official	610:813dcc80987e	583	* Elements values convention: 000ZZZZZ0XXYYYYYb
mbed_official	610:813dcc80987e	584	* - YYYYY : Interrupt source position in the XX register (5bits)
mbed_official	610:813dcc80987e	585	* - XX : Interrupt source register (2bits)
mbed_official	610:813dcc80987e	586	* - 01: CR1 register
mbed_official	610:813dcc80987e	587	* - 10: CR2 register
mbed_official	610:813dcc80987e	588	* - 11: CR3 register
mbed_official	610:813dcc80987e	589	* - ZZZZZ : Flag position in the ISR register(5bits)
mbed_official	610:813dcc80987e	590	* @{
mbed_official	610:813dcc80987e	591	*/
mbed_official	610:813dcc80987e	592	#define UART_IT_PE ((uint32_t)0x0028) /!< UART parity error interruption /
mbed_official	610:813dcc80987e	593	#define UART_IT_TXE ((uint32_t)0x0727) /!< UART transmit data register empty interruption /
mbed_official	610:813dcc80987e	594	#define UART_IT_TC ((uint32_t)0x0626) /!< UART transmission complete interruption /
mbed_official	610:813dcc80987e	595	#define UART_IT_RXNE ((uint32_t)0x0525) /!< UART read data register not empty interruption /
mbed_official	610:813dcc80987e	596	#define UART_IT_IDLE ((uint32_t)0x0424) /!< UART idle interruption /
mbed_official	610:813dcc80987e	597	#define UART_IT_LBD ((uint32_t)0x0846) /!< UART LIN break detection interruption /
mbed_official	610:813dcc80987e	598	#define UART_IT_CTS ((uint32_t)0x096A) /!< UART CTS interruption /
mbed_official	610:813dcc80987e	599	#define UART_IT_CM ((uint32_t)0x112E) /!< UART character match interruption /
mbed_official	610:813dcc80987e	600	#define UART_IT_WUF ((uint32_t)0x1476) /!< UART wake-up from stop mode interruption /
mbed_official	610:813dcc80987e	601
mbed_official	610:813dcc80987e	602	/* Elements values convention: 000000000XXYYYYYb
mbed_official	610:813dcc80987e	603	- YYYYY : Interrupt source position in the XX register (5bits)
mbed_official	610:813dcc80987e	604	- XX : Interrupt source register (2bits)
mbed_official	610:813dcc80987e	605	- 01: CR1 register
mbed_official	610:813dcc80987e	606	- 10: CR2 register
mbed_official	610:813dcc80987e	607	- 11: CR3 register */
mbed_official	610:813dcc80987e	608	#define UART_IT_ERR ((uint32_t)0x0060) /!< UART error interruption /
mbed_official	610:813dcc80987e	609
mbed_official	610:813dcc80987e	610	/* Elements values convention: 0000ZZZZ00000000b
mbed_official	610:813dcc80987e	611	- ZZZZ : Flag position in the ISR register(4bits) */
mbed_official	610:813dcc80987e	612	#define UART_IT_ORE ((uint32_t)0x0300) /!< UART overrun error interruption /
mbed_official	610:813dcc80987e	613	#define UART_IT_NE ((uint32_t)0x0200) /!< UART noise error interruption /
mbed_official	610:813dcc80987e	614	#define UART_IT_FE ((uint32_t)0x0100) /!< UART frame error interruption /
mbed_official	610:813dcc80987e	615	/**
mbed_official	610:813dcc80987e	616	* @}
mbed_official	610:813dcc80987e	617	*/
mbed_official	610:813dcc80987e	618
mbed_official	610:813dcc80987e	619	/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
mbed_official	610:813dcc80987e	620	* @{
mbed_official	610:813dcc80987e	621	*/
mbed_official	610:813dcc80987e	622	#define UART_CLEAR_PEF USART_ICR_PECF /!< Parity Error Clear Flag /
mbed_official	610:813dcc80987e	623	#define UART_CLEAR_FEF USART_ICR_FECF /!< Framing Error Clear Flag /
mbed_official	610:813dcc80987e	624	#define UART_CLEAR_NEF USART_ICR_NCF /!< Noise detected Clear Flag /
mbed_official	610:813dcc80987e	625	#define UART_CLEAR_OREF USART_ICR_ORECF /!< OverRun Error Clear Flag /
mbed_official	610:813dcc80987e	626	#define UART_CLEAR_IDLEF USART_ICR_IDLECF /!< IDLE line detected Clear Flag /
mbed_official	610:813dcc80987e	627	#define UART_CLEAR_TCF USART_ICR_TCCF /!< Transmission Complete Clear Flag /
mbed_official	610:813dcc80987e	628	#define UART_CLEAR_LBDF USART_ICR_LBDCF /!< LIN Break Detection Clear Flag /
mbed_official	610:813dcc80987e	629	#define UART_CLEAR_CTSF USART_ICR_CTSCF /!< CTS Interrupt Clear Flag /
mbed_official	610:813dcc80987e	630	#define UART_CLEAR_RTOF USART_ICR_RTOCF /!< Receiver Time Out Clear Flag /
mbed_official	610:813dcc80987e	631	#define UART_CLEAR_EOBF USART_ICR_EOBCF /!< End Of Block Clear Flag /
mbed_official	610:813dcc80987e	632	#define UART_CLEAR_CMF USART_ICR_CMCF /!< Character Match Clear Flag /
mbed_official	610:813dcc80987e	633	#define UART_CLEAR_WUF USART_ICR_WUCF /!< Wake Up from stop mode Clear Flag /
mbed_official	610:813dcc80987e	634	/**
mbed_official	610:813dcc80987e	635	* @}
mbed_official	610:813dcc80987e	636	*/
mbed_official	610:813dcc80987e	637
mbed_official	610:813dcc80987e	638
mbed_official	610:813dcc80987e	639	/**
mbed_official	610:813dcc80987e	640	* @}
mbed_official	610:813dcc80987e	641	*/
mbed_official	610:813dcc80987e	642
mbed_official	610:813dcc80987e	643	/* Exported macros -----------------------------------------------------------*/
mbed_official	610:813dcc80987e	644	/** @defgroup UART_Exported_Macros UART Exported Macros
mbed_official	610:813dcc80987e	645	* @{
mbed_official	610:813dcc80987e	646	*/
mbed_official	610:813dcc80987e	647
mbed_official	610:813dcc80987e	648	/** @brief Reset UART handle state.
mbed_official	610:813dcc80987e	649	* @param __HANDLE__: UART handle.
mbed_official	610:813dcc80987e	650	* @retval None
mbed_official	610:813dcc80987e	651	*/
mbed_official	610:813dcc80987e	652	#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
mbed_official	610:813dcc80987e	653
mbed_official	610:813dcc80987e	654	/** @brief Flush the UART Data registers.
mbed_official	610:813dcc80987e	655	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	656	* @retval None
mbed_official	610:813dcc80987e	657	*/
mbed_official	610:813dcc80987e	658	#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \
mbed_official	610:813dcc80987e	659	do{ \
mbed_official	610:813dcc80987e	660	SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
mbed_official	610:813dcc80987e	661	SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \
mbed_official	610:813dcc80987e	662	} while(0)
mbed_official	610:813dcc80987e	663
mbed_official	610:813dcc80987e	664	/** @brief Clear the specified UART pending flag.
mbed_official	610:813dcc80987e	665	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	666	* @param __FLAG__: specifies the flag to check.
mbed_official	610:813dcc80987e	667	* This parameter can be any combination of the following values:
mbed_official	610:813dcc80987e	668	* @arg UART_CLEAR_PEF, Parity Error Clear Flag
mbed_official	610:813dcc80987e	669	* @arg UART_CLEAR_FEF, Framing Error Clear Flag
mbed_official	610:813dcc80987e	670	* @arg UART_CLEAR_NEF, Noise detected Clear Flag
mbed_official	610:813dcc80987e	671	* @arg UART_CLEAR_OREF, OverRun Error Clear Flag
mbed_official	610:813dcc80987e	672	* @arg UART_CLEAR_IDLEF, IDLE line detected Clear Flag
mbed_official	610:813dcc80987e	673	* @arg UART_CLEAR_TCF, Transmission Complete Clear Flag
mbed_official	610:813dcc80987e	674	* @arg UART_CLEAR_LBDF, LIN Break Detection Clear Flag
mbed_official	610:813dcc80987e	675	* @arg UART_CLEAR_CTSF, CTS Interrupt Clear Flag
mbed_official	610:813dcc80987e	676	* @arg UART_CLEAR_RTOF, Receiver Time Out Clear Flag
mbed_official	610:813dcc80987e	677	* @arg UART_CLEAR_EOBF, End Of Block Clear Flag
mbed_official	610:813dcc80987e	678	* @arg UART_CLEAR_CMF, Character Match Clear Flag
mbed_official	610:813dcc80987e	679	* @arg UART_CLEAR_WUF, Wake Up from stop mode Clear Flag
mbed_official	610:813dcc80987e	680	* @retval None
mbed_official	610:813dcc80987e	681	*/
mbed_official	610:813dcc80987e	682	#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
mbed_official	610:813dcc80987e	683
mbed_official	610:813dcc80987e	684	/** @brief Clear the UART PE pending flag.
mbed_official	610:813dcc80987e	685	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	686	* @retval None
mbed_official	610:813dcc80987e	687	*/
mbed_official	610:813dcc80987e	688	#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF)
mbed_official	610:813dcc80987e	689
mbed_official	610:813dcc80987e	690	/** @brief Clear the UART FE pending flag.
mbed_official	610:813dcc80987e	691	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	692	* @retval None
mbed_official	610:813dcc80987e	693	*/
mbed_official	610:813dcc80987e	694	#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF)
mbed_official	610:813dcc80987e	695
mbed_official	610:813dcc80987e	696	/** @brief Clear the UART NE pending flag.
mbed_official	610:813dcc80987e	697	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	698	* @retval None
mbed_official	610:813dcc80987e	699	*/
mbed_official	610:813dcc80987e	700	#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF)
mbed_official	610:813dcc80987e	701
mbed_official	610:813dcc80987e	702	/** @brief Clear the UART ORE pending flag.
mbed_official	610:813dcc80987e	703	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	704	* @retval None
mbed_official	610:813dcc80987e	705	*/
mbed_official	610:813dcc80987e	706	#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF)
mbed_official	610:813dcc80987e	707
mbed_official	610:813dcc80987e	708	/** @brief Clear the UART IDLE pending flag.
mbed_official	610:813dcc80987e	709	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	710	* @retval None
mbed_official	610:813dcc80987e	711	*/
mbed_official	610:813dcc80987e	712	#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF)
mbed_official	610:813dcc80987e	713
mbed_official	610:813dcc80987e	714	/** @brief Check whether the specified UART flag is set or not.
mbed_official	610:813dcc80987e	715	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	716	* @param __FLAG__: specifies the flag to check.
mbed_official	610:813dcc80987e	717	* This parameter can be one of the following values:
mbed_official	610:813dcc80987e	718	* @arg UART_FLAG_REACK: Receive enable acknowledge flag
mbed_official	610:813dcc80987e	719	* @arg UART_FLAG_TEACK: Transmit enable acknowledge flag
mbed_official	610:813dcc80987e	720	* @arg UART_FLAG_WUF: Wake up from stop mode flag
mbed_official	610:813dcc80987e	721	* @arg UART_FLAG_RWU: Receiver wake up flag (if the UART in mute mode)
mbed_official	610:813dcc80987e	722	* @arg UART_FLAG_SBKF: Send Break flag
mbed_official	610:813dcc80987e	723	* @arg UART_FLAG_CMF: Character match flag
mbed_official	610:813dcc80987e	724	* @arg UART_FLAG_BUSY: Busy flag
mbed_official	610:813dcc80987e	725	* @arg UART_FLAG_ABRF: Auto Baud rate detection flag
mbed_official	610:813dcc80987e	726	* @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
mbed_official	610:813dcc80987e	727	* @arg UART_FLAG_EOBF: End of block flag
mbed_official	610:813dcc80987e	728	* @arg UART_FLAG_RTOF: Receiver timeout flag
mbed_official	610:813dcc80987e	729	* @arg UART_FLAG_CTS: CTS Change flag
mbed_official	610:813dcc80987e	730	* @arg UART_FLAG_LBD: LIN Break detection flag
mbed_official	610:813dcc80987e	731	* @arg UART_FLAG_TXE: Transmit data register empty flag
mbed_official	610:813dcc80987e	732	* @arg UART_FLAG_TC: Transmission Complete flag
mbed_official	610:813dcc80987e	733	* @arg UART_FLAG_RXNE: Receive data register not empty flag
mbed_official	610:813dcc80987e	734	* @arg UART_FLAG_IDLE: Idle Line detection flag
mbed_official	610:813dcc80987e	735	* @arg UART_FLAG_ORE: OverRun Error flag
mbed_official	610:813dcc80987e	736	* @arg UART_FLAG_NE: Noise Error flag
mbed_official	610:813dcc80987e	737	* @arg UART_FLAG_FE: Framing Error flag
mbed_official	610:813dcc80987e	738	* @arg UART_FLAG_PE: Parity Error flag
mbed_official	610:813dcc80987e	739	* @retval The new state of __FLAG__ (TRUE or FALSE).
mbed_official	610:813dcc80987e	740	*/
mbed_official	610:813dcc80987e	741	#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
mbed_official	610:813dcc80987e	742
mbed_official	610:813dcc80987e	743	/** @brief Enable the specified UART interrupt.
mbed_official	610:813dcc80987e	744	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	745	* @param __INTERRUPT__: specifies the UART interrupt source to enable.
mbed_official	610:813dcc80987e	746	* This parameter can be one of the following values:
mbed_official	610:813dcc80987e	747	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
mbed_official	610:813dcc80987e	748	* @arg UART_IT_CM: Character match interrupt
mbed_official	610:813dcc80987e	749	* @arg UART_IT_CTS: CTS change interrupt
mbed_official	610:813dcc80987e	750	* @arg UART_IT_LBD: LIN Break detection interrupt
mbed_official	610:813dcc80987e	751	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
mbed_official	610:813dcc80987e	752	* @arg UART_IT_TC: Transmission complete interrupt
mbed_official	610:813dcc80987e	753	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
mbed_official	610:813dcc80987e	754	* @arg UART_IT_IDLE: Idle line detection interrupt
mbed_official	610:813dcc80987e	755	* @arg UART_IT_PE: Parity Error interrupt
mbed_official	610:813dcc80987e	756	* @arg UART_IT_ERR: Error interrupt (Frame error, noise error, overrun error)
mbed_official	610:813dcc80987e	757	* @retval None
mbed_official	610:813dcc80987e	758	*/
mbed_official	610:813dcc80987e	759	#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
mbed_official	610:813dcc80987e	760	((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
mbed_official	610:813dcc80987e	761	((__HANDLE__)->Instance->CR3 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
mbed_official	610:813dcc80987e	762
mbed_official	610:813dcc80987e	763
mbed_official	610:813dcc80987e	764	/** @brief Disable the specified UART interrupt.
mbed_official	610:813dcc80987e	765	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	766	* @param __INTERRUPT__: specifies the UART interrupt source to disable.
mbed_official	610:813dcc80987e	767	* This parameter can be one of the following values:
mbed_official	610:813dcc80987e	768	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
mbed_official	610:813dcc80987e	769	* @arg UART_IT_CM: Character match interrupt
mbed_official	610:813dcc80987e	770	* @arg UART_IT_CTS: CTS change interrupt
mbed_official	610:813dcc80987e	771	* @arg UART_IT_LBD: LIN Break detection interrupt
mbed_official	610:813dcc80987e	772	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
mbed_official	610:813dcc80987e	773	* @arg UART_IT_TC: Transmission complete interrupt
mbed_official	610:813dcc80987e	774	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
mbed_official	610:813dcc80987e	775	* @arg UART_IT_IDLE: Idle line detection interrupt
mbed_official	610:813dcc80987e	776	* @arg UART_IT_PE: Parity Error interrupt
mbed_official	610:813dcc80987e	777	* @arg UART_IT_ERR: Error interrupt (Frame error, noise error, overrun error)
mbed_official	610:813dcc80987e	778	* @retval None
mbed_official	610:813dcc80987e	779	*/
mbed_official	610:813dcc80987e	780	#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
mbed_official	610:813dcc80987e	781	((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
mbed_official	610:813dcc80987e	782	((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
mbed_official	610:813dcc80987e	783
mbed_official	610:813dcc80987e	784	/** @brief Check whether the specified UART interrupt has occurred or not.
mbed_official	610:813dcc80987e	785	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	786	* @param __IT__: specifies the UART interrupt to check.
mbed_official	610:813dcc80987e	787	* This parameter can be one of the following values:
mbed_official	610:813dcc80987e	788	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
mbed_official	610:813dcc80987e	789	* @arg UART_IT_CM: Character match interrupt
mbed_official	610:813dcc80987e	790	* @arg UART_IT_CTS: CTS change interrupt
mbed_official	610:813dcc80987e	791	* @arg UART_IT_LBD: LIN Break detection interrupt
mbed_official	610:813dcc80987e	792	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
mbed_official	610:813dcc80987e	793	* @arg UART_IT_TC: Transmission complete interrupt
mbed_official	610:813dcc80987e	794	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
mbed_official	610:813dcc80987e	795	* @arg UART_IT_IDLE: Idle line detection interrupt
mbed_official	610:813dcc80987e	796	* @arg UART_IT_ORE: OverRun Error interrupt
mbed_official	610:813dcc80987e	797	* @arg UART_IT_NE: Noise Error interrupt
mbed_official	610:813dcc80987e	798	* @arg UART_IT_FE: Framing Error interrupt
mbed_official	610:813dcc80987e	799	* @arg UART_IT_PE: Parity Error interrupt
mbed_official	610:813dcc80987e	800	* @retval The new state of __IT__ (TRUE or FALSE).
mbed_official	610:813dcc80987e	801	*/
mbed_official	610:813dcc80987e	802	#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
mbed_official	610:813dcc80987e	803
mbed_official	610:813dcc80987e	804	/** @brief Check whether the specified UART interrupt source is enabled or not.
mbed_official	610:813dcc80987e	805	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	806	* @param __IT__: specifies the UART interrupt source to check.
mbed_official	610:813dcc80987e	807	* This parameter can be one of the following values:
mbed_official	610:813dcc80987e	808	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
mbed_official	610:813dcc80987e	809	* @arg UART_IT_CM: Character match interrupt
mbed_official	610:813dcc80987e	810	* @arg UART_IT_CTS: CTS change interrupt
mbed_official	610:813dcc80987e	811	* @arg UART_IT_LBD: LIN Break detection interrupt
mbed_official	610:813dcc80987e	812	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
mbed_official	610:813dcc80987e	813	* @arg UART_IT_TC: Transmission complete interrupt
mbed_official	610:813dcc80987e	814	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
mbed_official	610:813dcc80987e	815	* @arg UART_IT_IDLE: Idle line detection interrupt
mbed_official	610:813dcc80987e	816	* @arg UART_IT_ORE: OverRun Error interrupt
mbed_official	610:813dcc80987e	817	* @arg UART_IT_NE: Noise Error interrupt
mbed_official	610:813dcc80987e	818	* @arg UART_IT_FE: Framing Error interrupt
mbed_official	610:813dcc80987e	819	* @arg UART_IT_PE: Parity Error interrupt
mbed_official	610:813dcc80987e	820	* @retval The new state of __IT__ (TRUE or FALSE).
mbed_official	610:813dcc80987e	821	*/
mbed_official	610:813dcc80987e	822	#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
mbed_official	610:813dcc80987e	823	(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
mbed_official	610:813dcc80987e	824
mbed_official	610:813dcc80987e	825	/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag.
mbed_official	610:813dcc80987e	826	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	827	* @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
mbed_official	610:813dcc80987e	828	* to clear the corresponding interrupt
mbed_official	610:813dcc80987e	829	* This parameter can be one of the following values:
mbed_official	610:813dcc80987e	830	* @arg UART_CLEAR_PEF: Parity Error Clear Flag
mbed_official	610:813dcc80987e	831	* @arg UART_CLEAR_FEF: Framing Error Clear Flag
mbed_official	610:813dcc80987e	832	* @arg UART_CLEAR_NEF: Noise detected Clear Flag
mbed_official	610:813dcc80987e	833	* @arg UART_CLEAR_OREF: OverRun Error Clear Flag
mbed_official	610:813dcc80987e	834	* @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
mbed_official	610:813dcc80987e	835	* @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
mbed_official	610:813dcc80987e	836	* @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
mbed_official	610:813dcc80987e	837	* @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
mbed_official	610:813dcc80987e	838	* @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
mbed_official	610:813dcc80987e	839	* @arg UART_CLEAR_EOBF: End Of Block Clear Flag
mbed_official	610:813dcc80987e	840	* @arg UART_CLEAR_CMF: Character Match Clear Flag
mbed_official	610:813dcc80987e	841	* @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
mbed_official	610:813dcc80987e	842	* @retval None
mbed_official	610:813dcc80987e	843	*/
mbed_official	610:813dcc80987e	844	#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
mbed_official	610:813dcc80987e	845
mbed_official	610:813dcc80987e	846	/** @brief Set a specific UART request flag.
mbed_official	610:813dcc80987e	847	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	848	* @param __REQ__: specifies the request flag to set
mbed_official	610:813dcc80987e	849	* This parameter can be one of the following values:
mbed_official	610:813dcc80987e	850	* @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
mbed_official	610:813dcc80987e	851	* @arg UART_SENDBREAK_REQUEST: Send Break Request
mbed_official	610:813dcc80987e	852	* @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
mbed_official	610:813dcc80987e	853	* @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
mbed_official	610:813dcc80987e	854	* @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
mbed_official	610:813dcc80987e	855	* @retval None
mbed_official	610:813dcc80987e	856	*/
mbed_official	610:813dcc80987e	857	#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR \|= (uint32_t)(__REQ__))
mbed_official	610:813dcc80987e	858
mbed_official	610:813dcc80987e	859	/** @brief Enable the UART one bit sample method.
mbed_official	610:813dcc80987e	860	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	861	* @retval None
mbed_official	610:813dcc80987e	862	*/
mbed_official	610:813dcc80987e	863	#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\|= USART_CR3_ONEBIT)
mbed_official	610:813dcc80987e	864
mbed_official	610:813dcc80987e	865	/** @brief Disable the UART one bit sample method.
mbed_official	610:813dcc80987e	866	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	867	* @retval None
mbed_official	610:813dcc80987e	868	*/
mbed_official	610:813dcc80987e	869	#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
mbed_official	610:813dcc80987e	870
mbed_official	610:813dcc80987e	871	/** @brief Enable UART.
mbed_official	610:813dcc80987e	872	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	873	* @retval None
mbed_official	610:813dcc80987e	874	*/
mbed_official	610:813dcc80987e	875	#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 \|= USART_CR1_UE)
mbed_official	610:813dcc80987e	876
mbed_official	610:813dcc80987e	877	/** @brief Disable UART.
mbed_official	610:813dcc80987e	878	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	879	* @retval None
mbed_official	610:813dcc80987e	880	*/
mbed_official	610:813dcc80987e	881	#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
mbed_official	610:813dcc80987e	882
mbed_official	610:813dcc80987e	883	/** @brief Enable CTS flow control.
mbed_official	610:813dcc80987e	884	* @note This macro allows to enable CTS hardware flow control for a given UART instance,
mbed_official	610:813dcc80987e	885	* without need to call HAL_UART_Init() function.
mbed_official	610:813dcc80987e	886	* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
mbed_official	610:813dcc80987e	887	* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
mbed_official	610:813dcc80987e	888	* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
mbed_official	610:813dcc80987e	889	* - UART instance should have already been initialised (through call of HAL_UART_Init() )
mbed_official	610:813dcc80987e	890	* - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
mbed_official	610:813dcc80987e	891	* and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
mbed_official	610:813dcc80987e	892	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	893	* @retval None
mbed_official	610:813dcc80987e	894	*/
mbed_official	610:813dcc80987e	895	#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
mbed_official	610:813dcc80987e	896	do{ \
mbed_official	610:813dcc80987e	897	SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
mbed_official	610:813dcc80987e	898	(__HANDLE__)->Init.HwFlowCtl \|= USART_CR3_CTSE; \
mbed_official	610:813dcc80987e	899	} while(0)
mbed_official	610:813dcc80987e	900
mbed_official	610:813dcc80987e	901	/** @brief Disable CTS flow control.
mbed_official	610:813dcc80987e	902	* @note This macro allows to disable CTS hardware flow control for a given UART instance,
mbed_official	610:813dcc80987e	903	* without need to call HAL_UART_Init() function.
mbed_official	610:813dcc80987e	904	* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
mbed_official	610:813dcc80987e	905	* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
mbed_official	610:813dcc80987e	906	* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
mbed_official	610:813dcc80987e	907	* - UART instance should have already been initialised (through call of HAL_UART_Init() )
mbed_official	610:813dcc80987e	908	* - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
mbed_official	610:813dcc80987e	909	* and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
mbed_official	610:813dcc80987e	910	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	911	* @retval None
mbed_official	610:813dcc80987e	912	*/
mbed_official	610:813dcc80987e	913	#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
mbed_official	610:813dcc80987e	914	do{ \
mbed_official	610:813dcc80987e	915	CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
mbed_official	610:813dcc80987e	916	(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
mbed_official	610:813dcc80987e	917	} while(0)
mbed_official	610:813dcc80987e	918
mbed_official	610:813dcc80987e	919	/** @brief Enable RTS flow control.
mbed_official	610:813dcc80987e	920	* @note This macro allows to enable RTS hardware flow control for a given UART instance,
mbed_official	610:813dcc80987e	921	* without need to call HAL_UART_Init() function.
mbed_official	610:813dcc80987e	922	* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
mbed_official	610:813dcc80987e	923	* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
mbed_official	610:813dcc80987e	924	* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
mbed_official	610:813dcc80987e	925	* - UART instance should have already been initialised (through call of HAL_UART_Init() )
mbed_official	610:813dcc80987e	926	* - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
mbed_official	610:813dcc80987e	927	* and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
mbed_official	610:813dcc80987e	928	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	929	* @retval None
mbed_official	610:813dcc80987e	930	*/
mbed_official	610:813dcc80987e	931	#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
mbed_official	610:813dcc80987e	932	do{ \
mbed_official	610:813dcc80987e	933	SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
mbed_official	610:813dcc80987e	934	(__HANDLE__)->Init.HwFlowCtl \|= USART_CR3_RTSE; \
mbed_official	610:813dcc80987e	935	} while(0)
mbed_official	610:813dcc80987e	936
mbed_official	610:813dcc80987e	937	/** @brief Disable RTS flow control.
mbed_official	610:813dcc80987e	938	* @note This macro allows to disable RTS hardware flow control for a given UART instance,
mbed_official	610:813dcc80987e	939	* without need to call HAL_UART_Init() function.
mbed_official	610:813dcc80987e	940	* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
mbed_official	610:813dcc80987e	941	* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
mbed_official	610:813dcc80987e	942	* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
mbed_official	610:813dcc80987e	943	* - UART instance should have already been initialised (through call of HAL_UART_Init() )
mbed_official	610:813dcc80987e	944	* - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
mbed_official	610:813dcc80987e	945	* and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
mbed_official	610:813dcc80987e	946	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	947	* @retval None
mbed_official	610:813dcc80987e	948	*/
mbed_official	610:813dcc80987e	949	#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
mbed_official	610:813dcc80987e	950	do{ \
mbed_official	610:813dcc80987e	951	CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
mbed_official	610:813dcc80987e	952	(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
mbed_official	610:813dcc80987e	953	} while(0)
mbed_official	610:813dcc80987e	954
mbed_official	610:813dcc80987e	955	/**
mbed_official	610:813dcc80987e	956	* @}
mbed_official	610:813dcc80987e	957	*/
mbed_official	610:813dcc80987e	958
mbed_official	610:813dcc80987e	959	/* Private macros --------------------------------------------------------*/
mbed_official	610:813dcc80987e	960	/** @defgroup UART_Private_Macros UART Private Macros
mbed_official	610:813dcc80987e	961	* @{
mbed_official	610:813dcc80987e	962	*/
mbed_official	610:813dcc80987e	963	/** @brief BRR division operation to set BRR register with LPUART.
mbed_official	610:813dcc80987e	964	* @param __PCLK__: LPUART clock.
mbed_official	610:813dcc80987e	965	* @param __BAUD__: Baud rate set by the user.
mbed_official	610:813dcc80987e	966	* @retval Division result
mbed_official	610:813dcc80987e	967	*/
mbed_official	610:813dcc80987e	968	#define UART_DIV_LPUART(__PCLK__, __BAUD__) (((uint64_t)(__PCLK__)*256)/((__BAUD__)))
mbed_official	610:813dcc80987e	969
mbed_official	610:813dcc80987e	970	/** @brief BRR division operation to set BRR register in 8-bit oversampling mode.
mbed_official	610:813dcc80987e	971	* @param __PCLK__: UART clock.
mbed_official	610:813dcc80987e	972	* @param __BAUD__: Baud rate set by the user.
mbed_official	610:813dcc80987e	973	* @retval Division result
mbed_official	610:813dcc80987e	974	*/
mbed_official	610:813dcc80987e	975	#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) (((__PCLK__)*2)/((__BAUD__)))
mbed_official	610:813dcc80987e	976
mbed_official	610:813dcc80987e	977	/** @brief BRR division operation to set BRR register in 16-bit oversampling mode.
mbed_official	610:813dcc80987e	978	* @param __PCLK__: UART clock.
mbed_official	610:813dcc80987e	979	* @param __BAUD__: Baud rate set by the user.
mbed_official	610:813dcc80987e	980	* @retval Division result
mbed_official	610:813dcc80987e	981	*/
mbed_official	610:813dcc80987e	982	#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__))/((__BAUD__)))
mbed_official	610:813dcc80987e	983
mbed_official	610:813dcc80987e	984	/** @brief Check whether or not UART instance is Low Power UART.
mbed_official	610:813dcc80987e	985	* @param __HANDLE__: specifies the UART Handle.
mbed_official	610:813dcc80987e	986	* @retval SET (instance is LPUART) or RESET (instance isn't LPUART)
mbed_official	610:813dcc80987e	987	*/
mbed_official	610:813dcc80987e	988	#define UART_INSTANCE_LOWPOWER(__HANDLE__) (((__HANDLE__)->Instance == LPUART1) ? SET : RESET )
mbed_official	610:813dcc80987e	989
mbed_official	610:813dcc80987e	990	/** @brief Check UART Baud rate.
mbed_official	610:813dcc80987e	991	* @param __BAUDRATE__: Baudrate specified by the user.
mbed_official	610:813dcc80987e	992	* The maximum Baud Rate is derived from the maximum clock on L4 (i.e. 80 MHz)
mbed_official	610:813dcc80987e	993	* divided by the smallest oversampling used on the USART (i.e. 8)
mbed_official	610:813dcc80987e	994	* @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid)
mbed_official	610:813dcc80987e	995	*/
mbed_official	610:813dcc80987e	996	#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 10000001)
mbed_official	610:813dcc80987e	997
mbed_official	610:813dcc80987e	998	/** @brief Check UART assertion time.
mbed_official	610:813dcc80987e	999	* @param __TIME__: 5-bit value assertion time.
mbed_official	610:813dcc80987e	1000	* @retval Test result (TRUE or FALSE).
mbed_official	610:813dcc80987e	1001	*/
mbed_official	610:813dcc80987e	1002	#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1F)
mbed_official	610:813dcc80987e	1003
mbed_official	610:813dcc80987e	1004	/** @brief Check UART deassertion time.
mbed_official	610:813dcc80987e	1005	* @param __TIME__: 5-bit value deassertion time.
mbed_official	610:813dcc80987e	1006	* @retval Test result (TRUE or FALSE).
mbed_official	610:813dcc80987e	1007	*/
mbed_official	610:813dcc80987e	1008	#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1F)
mbed_official	610:813dcc80987e	1009
mbed_official	610:813dcc80987e	1010	/**
mbed_official	610:813dcc80987e	1011	* @brief Ensure that UART frame number of stop bits is valid.
mbed_official	610:813dcc80987e	1012	* @param __STOPBITS__: UART frame number of stop bits.
mbed_official	610:813dcc80987e	1013	* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
mbed_official	610:813dcc80987e	1014	*/
mbed_official	610:813dcc80987e	1015	#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) \|\| \
mbed_official	610:813dcc80987e	1016	((__STOPBITS__) == UART_STOPBITS_2) \|\| \
mbed_official	610:813dcc80987e	1017	((__STOPBITS__) == UART_STOPBITS_1_5))
mbed_official	610:813dcc80987e	1018
mbed_official	610:813dcc80987e	1019	/**
mbed_official	610:813dcc80987e	1020	* @brief Ensure that UART frame parity is valid.
mbed_official	610:813dcc80987e	1021	* @param __PARITY__: UART frame parity.
mbed_official	610:813dcc80987e	1022	* @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
mbed_official	610:813dcc80987e	1023	*/
mbed_official	610:813dcc80987e	1024	#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) \|\| \
mbed_official	610:813dcc80987e	1025	((__PARITY__) == UART_PARITY_EVEN) \|\| \
mbed_official	610:813dcc80987e	1026	((__PARITY__) == UART_PARITY_ODD))
mbed_official	610:813dcc80987e	1027
mbed_official	610:813dcc80987e	1028	/**
mbed_official	610:813dcc80987e	1029	* @brief Ensure that UART hardware flow control is valid.
mbed_official	610:813dcc80987e	1030	* @param __CONTROL__: UART hardware flow control.
mbed_official	610:813dcc80987e	1031	* @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid)
mbed_official	610:813dcc80987e	1032	*/
mbed_official	610:813dcc80987e	1033	#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\
mbed_official	610:813dcc80987e	1034	(((__CONTROL__) == UART_HWCONTROL_NONE) \|\| \
mbed_official	610:813dcc80987e	1035	((__CONTROL__) == UART_HWCONTROL_RTS) \|\| \
mbed_official	610:813dcc80987e	1036	((__CONTROL__) == UART_HWCONTROL_CTS) \|\| \
mbed_official	610:813dcc80987e	1037	((__CONTROL__) == UART_HWCONTROL_RTS_CTS))
mbed_official	610:813dcc80987e	1038
mbed_official	610:813dcc80987e	1039	/**
mbed_official	610:813dcc80987e	1040	* @brief Ensure that UART communication mode is valid.
mbed_official	610:813dcc80987e	1041	* @param __MODE__: UART communication mode.
mbed_official	610:813dcc80987e	1042	* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
mbed_official	610:813dcc80987e	1043	*/
mbed_official	610:813dcc80987e	1044	#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((__MODE__) != (uint32_t)0x00))
mbed_official	610:813dcc80987e	1045
mbed_official	610:813dcc80987e	1046	/**
mbed_official	610:813dcc80987e	1047	* @brief Ensure that UART state is valid.
mbed_official	610:813dcc80987e	1048	* @param __STATE__: UART state.
mbed_official	610:813dcc80987e	1049	* @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid)
mbed_official	610:813dcc80987e	1050	*/
mbed_official	610:813dcc80987e	1051	#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1052	((__STATE__) == UART_STATE_ENABLE))
mbed_official	610:813dcc80987e	1053
mbed_official	610:813dcc80987e	1054	/**
mbed_official	610:813dcc80987e	1055	* @brief Ensure that UART oversampling is valid.
mbed_official	610:813dcc80987e	1056	* @param __SAMPLING__: UART oversampling.
mbed_official	610:813dcc80987e	1057	* @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid)
mbed_official	610:813dcc80987e	1058	*/
mbed_official	610:813dcc80987e	1059	#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) \|\| \
mbed_official	610:813dcc80987e	1060	((__SAMPLING__) == UART_OVERSAMPLING_8))
mbed_official	610:813dcc80987e	1061
mbed_official	610:813dcc80987e	1062	/**
mbed_official	610:813dcc80987e	1063	* @brief Ensure that UART frame sampling is valid.
mbed_official	610:813dcc80987e	1064	* @param __ONEBIT__: UART frame sampling.
mbed_official	610:813dcc80987e	1065	* @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
mbed_official	610:813dcc80987e	1066	*/
mbed_official	610:813dcc80987e	1067	#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1068	((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE))
mbed_official	610:813dcc80987e	1069
mbed_official	610:813dcc80987e	1070	/**
mbed_official	610:813dcc80987e	1071	* @brief Ensure that UART auto Baud rate detection mode is valid.
mbed_official	610:813dcc80987e	1072	* @param __MODE__: UART auto Baud rate detection mode.
mbed_official	610:813dcc80987e	1073	* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
mbed_official	610:813dcc80987e	1074	*/
mbed_official	610:813dcc80987e	1075	#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) \|\| \
mbed_official	610:813dcc80987e	1076	((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) \|\| \
mbed_official	610:813dcc80987e	1077	((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) \|\| \
mbed_official	610:813dcc80987e	1078	((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
mbed_official	610:813dcc80987e	1079
mbed_official	610:813dcc80987e	1080	/**
mbed_official	610:813dcc80987e	1081	* @brief Ensure that UART receiver timeout setting is valid.
mbed_official	610:813dcc80987e	1082	* @param __TIMEOUT__: UART receiver timeout setting.
mbed_official	610:813dcc80987e	1083	* @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid)
mbed_official	610:813dcc80987e	1084	*/
mbed_official	610:813dcc80987e	1085	#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1086	((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE))
mbed_official	610:813dcc80987e	1087
mbed_official	610:813dcc80987e	1088	/**
mbed_official	610:813dcc80987e	1089	* @brief Ensure that UART LIN state is valid.
mbed_official	610:813dcc80987e	1090	* @param __LIN__: UART LIN state.
mbed_official	610:813dcc80987e	1091	* @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid)
mbed_official	610:813dcc80987e	1092	*/
mbed_official	610:813dcc80987e	1093	#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1094	((__LIN__) == UART_LIN_ENABLE))
mbed_official	610:813dcc80987e	1095
mbed_official	610:813dcc80987e	1096	/**
mbed_official	610:813dcc80987e	1097	* @brief Ensure that UART LIN break detection length is valid.
mbed_official	610:813dcc80987e	1098	* @param __LENGTH__: UART LIN break detection length.
mbed_official	610:813dcc80987e	1099	* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
mbed_official	610:813dcc80987e	1100	*/
mbed_official	610:813dcc80987e	1101	#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) \|\| \
mbed_official	610:813dcc80987e	1102	((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B))
mbed_official	610:813dcc80987e	1103
mbed_official	610:813dcc80987e	1104	/**
mbed_official	610:813dcc80987e	1105	* @brief Ensure that UART DMA TX state is valid.
mbed_official	610:813dcc80987e	1106	* @param __DMATX__: UART DMA TX state.
mbed_official	610:813dcc80987e	1107	* @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid)
mbed_official	610:813dcc80987e	1108	*/
mbed_official	610:813dcc80987e	1109	#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1110	((__DMATX__) == UART_DMA_TX_ENABLE))
mbed_official	610:813dcc80987e	1111
mbed_official	610:813dcc80987e	1112	/**
mbed_official	610:813dcc80987e	1113	* @brief Ensure that UART DMA RX state is valid.
mbed_official	610:813dcc80987e	1114	* @param __DMARX__: UART DMA RX state.
mbed_official	610:813dcc80987e	1115	* @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid)
mbed_official	610:813dcc80987e	1116	*/
mbed_official	610:813dcc80987e	1117	#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1118	((__DMARX__) == UART_DMA_RX_ENABLE))
mbed_official	610:813dcc80987e	1119
mbed_official	610:813dcc80987e	1120	/**
mbed_official	610:813dcc80987e	1121	* @brief Ensure that UART half-duplex state is valid.
mbed_official	610:813dcc80987e	1122	* @param __HDSEL__: UART half-duplex state.
mbed_official	610:813dcc80987e	1123	* @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid)
mbed_official	610:813dcc80987e	1124	*/
mbed_official	610:813dcc80987e	1125	#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1126	((__HDSEL__) == UART_HALF_DUPLEX_ENABLE))
mbed_official	610:813dcc80987e	1127
mbed_official	610:813dcc80987e	1128	/**
mbed_official	610:813dcc80987e	1129	* @brief Ensure that UART wake-up method is valid.
mbed_official	610:813dcc80987e	1130	* @param __WAKEUP__: UART wake-up method .
mbed_official	610:813dcc80987e	1131	* @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid)
mbed_official	610:813dcc80987e	1132	*/
mbed_official	610:813dcc80987e	1133	#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) \|\| \
mbed_official	610:813dcc80987e	1134	((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK))
mbed_official	610:813dcc80987e	1135
mbed_official	610:813dcc80987e	1136	/**
mbed_official	610:813dcc80987e	1137	* @brief Ensure that UART request parameter is valid.
mbed_official	610:813dcc80987e	1138	* @param __PARAM__: UART request parameter.
mbed_official	610:813dcc80987e	1139	* @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
mbed_official	610:813dcc80987e	1140	*/
mbed_official	610:813dcc80987e	1141	#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) \|\| \
mbed_official	610:813dcc80987e	1142	((__PARAM__) == UART_SENDBREAK_REQUEST) \|\| \
mbed_official	610:813dcc80987e	1143	((__PARAM__) == UART_MUTE_MODE_REQUEST) \|\| \
mbed_official	610:813dcc80987e	1144	((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) \|\| \
mbed_official	610:813dcc80987e	1145	((__PARAM__) == UART_TXDATA_FLUSH_REQUEST))
mbed_official	610:813dcc80987e	1146
mbed_official	610:813dcc80987e	1147	/**
mbed_official	610:813dcc80987e	1148	* @brief Ensure that UART advanced features initialization is valid.
mbed_official	610:813dcc80987e	1149	* @param __INIT__: UART advanced features initialization.
mbed_official	610:813dcc80987e	1150	* @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid)
mbed_official	610:813dcc80987e	1151	*/
mbed_official	610:813dcc80987e	1152	#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT \| \
mbed_official	610:813dcc80987e	1153	UART_ADVFEATURE_TXINVERT_INIT \| \
mbed_official	610:813dcc80987e	1154	UART_ADVFEATURE_RXINVERT_INIT \| \
mbed_official	610:813dcc80987e	1155	UART_ADVFEATURE_DATAINVERT_INIT \| \
mbed_official	610:813dcc80987e	1156	UART_ADVFEATURE_SWAP_INIT \| \
mbed_official	610:813dcc80987e	1157	UART_ADVFEATURE_RXOVERRUNDISABLE_INIT \| \
mbed_official	610:813dcc80987e	1158	UART_ADVFEATURE_DMADISABLEONERROR_INIT \| \
mbed_official	610:813dcc80987e	1159	UART_ADVFEATURE_AUTOBAUDRATE_INIT \| \
mbed_official	610:813dcc80987e	1160	UART_ADVFEATURE_MSBFIRST_INIT))
mbed_official	610:813dcc80987e	1161
mbed_official	610:813dcc80987e	1162	/**
mbed_official	610:813dcc80987e	1163	* @brief Ensure that UART frame TX inversion setting is valid.
mbed_official	610:813dcc80987e	1164	* @param __TXINV__: UART frame TX inversion setting.
mbed_official	610:813dcc80987e	1165	* @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid)
mbed_official	610:813dcc80987e	1166	*/
mbed_official	610:813dcc80987e	1167	#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1168	((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE))
mbed_official	610:813dcc80987e	1169
mbed_official	610:813dcc80987e	1170	/**
mbed_official	610:813dcc80987e	1171	* @brief Ensure that UART frame RX inversion setting is valid.
mbed_official	610:813dcc80987e	1172	* @param __RXINV__: UART frame RX inversion setting.
mbed_official	610:813dcc80987e	1173	* @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid)
mbed_official	610:813dcc80987e	1174	*/
mbed_official	610:813dcc80987e	1175	#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1176	((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE))
mbed_official	610:813dcc80987e	1177
mbed_official	610:813dcc80987e	1178	/**
mbed_official	610:813dcc80987e	1179	* @brief Ensure that UART frame data inversion setting is valid.
mbed_official	610:813dcc80987e	1180	* @param __DATAINV__: UART frame data inversion setting.
mbed_official	610:813dcc80987e	1181	* @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid)
mbed_official	610:813dcc80987e	1182	*/
mbed_official	610:813dcc80987e	1183	#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1184	((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE))
mbed_official	610:813dcc80987e	1185
mbed_official	610:813dcc80987e	1186	/**
mbed_official	610:813dcc80987e	1187	* @brief Ensure that UART frame RX/TX pins swap setting is valid.
mbed_official	610:813dcc80987e	1188	* @param __SWAP__: UART frame RX/TX pins swap setting.
mbed_official	610:813dcc80987e	1189	* @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid)
mbed_official	610:813dcc80987e	1190	*/
mbed_official	610:813dcc80987e	1191	#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1192	((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE))
mbed_official	610:813dcc80987e	1193
mbed_official	610:813dcc80987e	1194	/**
mbed_official	610:813dcc80987e	1195	* @brief Ensure that UART frame overrun setting is valid.
mbed_official	610:813dcc80987e	1196	* @param __OVERRUN__: UART frame overrun setting.
mbed_official	610:813dcc80987e	1197	* @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid)
mbed_official	610:813dcc80987e	1198	*/
mbed_official	610:813dcc80987e	1199	#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) \|\| \
mbed_official	610:813dcc80987e	1200	((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE))
mbed_official	610:813dcc80987e	1201
mbed_official	610:813dcc80987e	1202	/**
mbed_official	610:813dcc80987e	1203	* @brief Ensure that UART auto Baud rate state is valid.
mbed_official	610:813dcc80987e	1204	* @param __AUTOBAUDRATE__: UART auto Baud rate state.
mbed_official	610:813dcc80987e	1205	* @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid)
mbed_official	610:813dcc80987e	1206	*/
mbed_official	610:813dcc80987e	1207	#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1208	((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
mbed_official	610:813dcc80987e	1209
mbed_official	610:813dcc80987e	1210	/**
mbed_official	610:813dcc80987e	1211	* @brief Ensure that UART DMA enabling or disabling on error setting is valid.
mbed_official	610:813dcc80987e	1212	* @param __DMA__: UART DMA enabling or disabling on error setting.
mbed_official	610:813dcc80987e	1213	* @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid)
mbed_official	610:813dcc80987e	1214	*/
mbed_official	610:813dcc80987e	1215	#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) \|\| \
mbed_official	610:813dcc80987e	1216	((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
mbed_official	610:813dcc80987e	1217
mbed_official	610:813dcc80987e	1218	/**
mbed_official	610:813dcc80987e	1219	* @brief Ensure that UART frame MSB first setting is valid.
mbed_official	610:813dcc80987e	1220	* @param __MSBFIRST__: UART frame MSB first setting.
mbed_official	610:813dcc80987e	1221	* @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid)
mbed_official	610:813dcc80987e	1222	*/
mbed_official	610:813dcc80987e	1223	#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1224	((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE))
mbed_official	610:813dcc80987e	1225
mbed_official	610:813dcc80987e	1226	/**
mbed_official	610:813dcc80987e	1227	* @brief Ensure that UART stop mode state is valid.
mbed_official	610:813dcc80987e	1228	* @param __STOPMODE__: UART stop mode state.
mbed_official	610:813dcc80987e	1229	* @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid)
mbed_official	610:813dcc80987e	1230	*/
mbed_official	610:813dcc80987e	1231	#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1232	((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE))
mbed_official	610:813dcc80987e	1233
mbed_official	610:813dcc80987e	1234	/**
mbed_official	610:813dcc80987e	1235	* @brief Ensure that UART mute mode state is valid.
mbed_official	610:813dcc80987e	1236	* @param __MUTE__: UART mute mode state.
mbed_official	610:813dcc80987e	1237	* @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid)
mbed_official	610:813dcc80987e	1238	*/
mbed_official	610:813dcc80987e	1239	#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) \|\| \
mbed_official	610:813dcc80987e	1240	((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE))
mbed_official	610:813dcc80987e	1241
mbed_official	610:813dcc80987e	1242	/**
mbed_official	610:813dcc80987e	1243	* @brief Ensure that UART wake-up selection is valid.
mbed_official	610:813dcc80987e	1244	* @param __WAKE__: UART wake-up selection.
mbed_official	610:813dcc80987e	1245	* @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid)
mbed_official	610:813dcc80987e	1246	*/
mbed_official	610:813dcc80987e	1247	#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) \|\| \
mbed_official	610:813dcc80987e	1248	((__WAKE__) == UART_WAKEUP_ON_STARTBIT) \|\| \
mbed_official	610:813dcc80987e	1249	((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY))
mbed_official	610:813dcc80987e	1250
mbed_official	610:813dcc80987e	1251	/**
mbed_official	610:813dcc80987e	1252	* @brief Ensure that UART driver enable polarity is valid.
mbed_official	610:813dcc80987e	1253	* @param __POLARITY__: UART driver enable polarity.
mbed_official	610:813dcc80987e	1254	* @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid)
mbed_official	610:813dcc80987e	1255	*/
mbed_official	610:813dcc80987e	1256	#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) \|\| \
mbed_official	610:813dcc80987e	1257	((__POLARITY__) == UART_DE_POLARITY_LOW))
mbed_official	610:813dcc80987e	1258
mbed_official	610:813dcc80987e	1259	/**
mbed_official	610:813dcc80987e	1260	* @brief Ensure that LPUART frame number of stop bits is valid.
mbed_official	610:813dcc80987e	1261	* @param __STOPBITS__: LPUART frame number of stop bits.
mbed_official	610:813dcc80987e	1262	* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
mbed_official	610:813dcc80987e	1263	*/
mbed_official	610:813dcc80987e	1264	#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) \|\| \
mbed_official	610:813dcc80987e	1265	((__STOPBITS__) == UART_STOPBITS_2))
mbed_official	610:813dcc80987e	1266
mbed_official	610:813dcc80987e	1267	/**
mbed_official	610:813dcc80987e	1268	* @}
mbed_official	610:813dcc80987e	1269	*/
mbed_official	610:813dcc80987e	1270
mbed_official	610:813dcc80987e	1271	/* Include UART HAL Extended module */
mbed_official	610:813dcc80987e	1272	#include "stm32l4xx_hal_uart_ex.h"
mbed_official	610:813dcc80987e	1273
mbed_official	610:813dcc80987e	1274	/* Exported functions --------------------------------------------------------*/
mbed_official	610:813dcc80987e	1275	/** @addtogroup UART_Exported_Functions UART Exported Functions
mbed_official	610:813dcc80987e	1276	* @{
mbed_official	610:813dcc80987e	1277	*/
mbed_official	610:813dcc80987e	1278
mbed_official	610:813dcc80987e	1279	/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
mbed_official	610:813dcc80987e	1280	* @{
mbed_official	610:813dcc80987e	1281	*/
mbed_official	610:813dcc80987e	1282
mbed_official	610:813dcc80987e	1283	/* Initialization and de-initialization functions ****************************/
mbed_official	610:813dcc80987e	1284	HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1285	HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1286	HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
mbed_official	610:813dcc80987e	1287	HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
mbed_official	610:813dcc80987e	1288	HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1289	void HAL_UART_MspInit(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1290	void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1291
mbed_official	610:813dcc80987e	1292	/**
mbed_official	610:813dcc80987e	1293	* @}
mbed_official	610:813dcc80987e	1294	*/
mbed_official	610:813dcc80987e	1295
mbed_official	610:813dcc80987e	1296	/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
mbed_official	610:813dcc80987e	1297	* @{
mbed_official	610:813dcc80987e	1298	*/
mbed_official	610:813dcc80987e	1299
mbed_official	610:813dcc80987e	1300	/* IO operation functions *****************************************************/
mbed_official	610:813dcc80987e	1301	HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
mbed_official	610:813dcc80987e	1302	HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
mbed_official	610:813dcc80987e	1303	HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
mbed_official	610:813dcc80987e	1304	HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
mbed_official	610:813dcc80987e	1305	HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
mbed_official	610:813dcc80987e	1306	HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
mbed_official	610:813dcc80987e	1307	HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1308	HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1309	HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1310	void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1311	void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1312	void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1313	void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1314	void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1315	void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1316
mbed_official	610:813dcc80987e	1317	/**
mbed_official	610:813dcc80987e	1318	* @}
mbed_official	610:813dcc80987e	1319	*/
mbed_official	610:813dcc80987e	1320
mbed_official	610:813dcc80987e	1321	/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
mbed_official	610:813dcc80987e	1322	* @{
mbed_official	610:813dcc80987e	1323	*/
mbed_official	610:813dcc80987e	1324
mbed_official	610:813dcc80987e	1325	/* Peripheral Control functions ************************************************/
mbed_official	610:813dcc80987e	1326	HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1327	HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1328	HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1329	void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1330	HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1331	HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1332
mbed_official	610:813dcc80987e	1333	/**
mbed_official	610:813dcc80987e	1334	* @}
mbed_official	610:813dcc80987e	1335	*/
mbed_official	610:813dcc80987e	1336
mbed_official	610:813dcc80987e	1337	/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
mbed_official	610:813dcc80987e	1338	* @{
mbed_official	610:813dcc80987e	1339	*/
mbed_official	610:813dcc80987e	1340
mbed_official	610:813dcc80987e	1341	/* Peripheral State and Errors functions **************************************************/
mbed_official	610:813dcc80987e	1342	HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1343	uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1344
mbed_official	610:813dcc80987e	1345	/**
mbed_official	610:813dcc80987e	1346	* @}
mbed_official	610:813dcc80987e	1347	*/
mbed_official	610:813dcc80987e	1348
mbed_official	610:813dcc80987e	1349	/**
mbed_official	610:813dcc80987e	1350	* @}
mbed_official	610:813dcc80987e	1351	*/
mbed_official	610:813dcc80987e	1352
mbed_official	610:813dcc80987e	1353	/* Private functions -----------------------------------------------------------*/
mbed_official	610:813dcc80987e	1354	/** @addtogroup UART_Private_Functions UART Private Functions
mbed_official	610:813dcc80987e	1355	* @{
mbed_official	610:813dcc80987e	1356	*/
mbed_official	610:813dcc80987e	1357
mbed_official	610:813dcc80987e	1358	HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1359	HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1360	HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
mbed_official	610:813dcc80987e	1361	void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
mbed_official	610:813dcc80987e	1362
mbed_official	610:813dcc80987e	1363	/**
mbed_official	610:813dcc80987e	1364	* @}
mbed_official	610:813dcc80987e	1365	*/
mbed_official	610:813dcc80987e	1366
mbed_official	610:813dcc80987e	1367	/**
mbed_official	610:813dcc80987e	1368	* @}
mbed_official	610:813dcc80987e	1369	*/
mbed_official	610:813dcc80987e	1370
mbed_official	610:813dcc80987e	1371	/**
mbed_official	610:813dcc80987e	1372	* @}
mbed_official	610:813dcc80987e	1373	*/
mbed_official	610:813dcc80987e	1374
mbed_official	610:813dcc80987e	1375	#ifdef __cplusplus
mbed_official	610:813dcc80987e	1376	}
mbed_official	610:813dcc80987e	1377	#endif
mbed_official	610:813dcc80987e	1378
mbed_official	610:813dcc80987e	1379	#endif /* __STM32L4xx_HAL_UART_H */
mbed_official	610:813dcc80987e	1380
mbed_official	610:813dcc80987e	1381	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	06 Apr 2016
Imports:	21
Forks:	0
Commits:	642
Dependents:	0
Dependencies:	0
Followers:	14

targets/cmsis/TARGET_STM/TARGET_STM32L4/stm32l4xx_hal_uart.h@610:813dcc80987e, 2015-08-14 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning