Diff: targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303K8/PinNames.h

Revision:

634:ac7d6880524d

Parent:

633:188f3ef4d258

Child:

635:a11c0372f0ba

--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303K8/PinNames.h	Mon Sep 28 15:00:09 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,164 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM)  ((int)(((MODE  & 0x0F) << 0) |\
-                                                ((PUPD  & 0x07) << 4) |\
-                                                ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED)  ((int)(((MODE     & 0x0F) <<  0) |\
-                                                                       ((PUPD     & 0x07) <<  4) |\
-                                                                       ((AFNUM    & 0x0F) <<  7) |\
-                                                                       ((CHANNEL  & 0x0F) << 11) |\
-                                                                       ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X)     (((X) >>  0) & 0x0F)
-#define STM_PIN_PUPD(X)     (((X) >>  4) & 0x07)
-#define STM_PIN_AFNUM(X)    (((X) >>  7) & 0x0F)
-#define STM_PIN_CHANNEL(X)  (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT              (0)
-#define STM_MODE_OUTPUT_PP          (1)
-#define STM_MODE_OUTPUT_OD          (2)
-#define STM_MODE_AF_PP              (3)
-#define STM_MODE_AF_OD              (4)
-#define STM_MODE_ANALOG             (5)
-#define STM_MODE_IT_RISING          (6)
-#define STM_MODE_IT_FALLING         (7)
-#define STM_MODE_IT_RISING_FALLING  (8)
-#define STM_MODE_EVT_RISING         (9)
-#define STM_MODE_EVT_FALLING        (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET       (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble  = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X)  ((uint32_t)(X) & 0xF)
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
-    PA_0  = 0x00,
-    PA_1  = 0x01,
-    PA_2  = 0x02,
-    PA_3  = 0x03,
-    PA_4  = 0x04,
-    PA_5  = 0x05,
-    PA_6  = 0x06,
-    PA_7  = 0x07,
-    PA_8  = 0x08,
-    PA_9  = 0x09,
-    PA_10 = 0x0A,
-    PA_11 = 0x0B,
-    PA_12 = 0x0C,
-    PA_13 = 0x0D,
-    PA_14 = 0x0E,
-    PA_15 = 0x0F,
-
-    PB_0  = 0x10,
-    PB_1  = 0x11,
-    PB_3  = 0x13,
-    PB_4  = 0x14,
-    PB_5  = 0x15,
-    PB_6  = 0x16,
-    PB_7  = 0x17,
-
-    PF_0  = 0x50,
-    PF_1  = 0x51,
-
-    // Arduino connector namings
-    A0          = PA_0,
-    A1          = PA_1,
-    A2          = PA_3,
-    A3          = PA_4,
-    A4          = PA_5,
-    A5          = PA_6,
-    D0          = PA_10,
-    D1          = PA_9,
-    D2          = PA_12,
-    D3          = PB_0,
-    D4          = PB_7,
-    D5          = PB_6,
-    D6          = PB_1,
-    D7          = PF_0,
-    D8          = PF_1,
-    D9          = PA_8,
-    D10         = PA_11,
-    D11         = PB_5,
-    D12         = PB_4,
-    D13         = PB_3,
-
-    // Generic signals namings
-    LED1        = PB_3,
-    LED2        = PB_3,
-    LED3        = PB_3,
-    LED4        = PB_3,
-    USER_BUTTON = 0x20, // no user button on the board
-    SERIAL_TX   = PA_2,
-    SERIAL_RX   = PA_15,
-    USBTX       = PA_2,
-    USBRX       = PA_15,
-    I2C_SCL     = PB_6,
-    I2C_SDA     = PB_7,
-    SPI_MOSI    = PB_5,
-    SPI_MISO    = PB_4,
-    SPI_SCK     = PB_3,
-    SPI_CS      = PA_11,
-    PWM_OUT     = PA_8,
-
-    // Not connected
-    NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
-    PullNone  = 0,
-    PullUp    = 1,
-    PullDown  = 2,
-    OpenDrain = 3,
-    PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif