Modified version of the mbed library for use with the Nucleo boards.

Dependents:   EEPROMWrite Full-Project

Fork of mbed-src by mbed official

Revision:
634:ac7d6880524d
Parent:
633:188f3ef4d258
Child:
635:a11c0372f0ba
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303K8/stm32f3xx.h	Mon Sep 28 15:00:09 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,238 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f3xx.h
-  * @author  MCD Application Team
-  * @version V2.1.0
-  * @date    12-Sept-2014
-  * @brief   CMSIS STM32F3xx Device Peripheral Access Layer Header File.           
-  *            
-  *          The file is the unique include file that the application programmer
-  *          is using in the C source code, usually in main.c. This file contains:
-  *           - Configuration section that allows to select:
-  *              - The STM32F3xx device used in the target application
-  *              - To use or not the peripheral’s drivers in application code(i.e. 
-  *                code will be based on direct access to peripheral’s registers 
-  *                rather than drivers API), this option is controlled by 
-  *                "#define USE_HAL_DRIVER"
-  *  
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f3xx
-  * @{
-  */
-    
-#ifndef __STM32F3xx_H
-#define __STM32F3xx_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif /* __cplusplus */
-   
-/** @addtogroup Library_configuration_section
-  * @{
-  */
-
-/* Uncomment the line below according to the target STM32 device used in your
-   application 
-  */
-
-#if !defined (STM32F301x8) && !defined (STM32F302x8) && !defined (STM32F318xx) && \
-    !defined (STM32F302xC) && !defined (STM32F303xC) && !defined (STM32F358xx) && \
-    !defined (STM32F303x8) && !defined (STM32F334x8) && !defined (STM32F328xx) && \
-    !defined (STM32F302xE) && !defined (STM32F303xE) && !defined (STM32F398xx) && \
-    !defined (STM32F373xC) && !defined (STM32F378xx)
-    
-  /* #define STM32F301x8 */   /*!< STM32F301K6, STM32F301K8, STM32F301C6, STM32F301C8,
-                                   STM32F301R6 and STM32F301R8 Devices */
-  /* #define STM32F302x8 */   /*!< STM32F302K6, STM32F302K8, STM32F302C6, STM32F302C8,
-                                   STM32F302R6 and STM32F302R8 Devices */
-  /* #define STM32F302xC */   /*!< STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC, STM32F302VB and STM32F302VC Devices */
-  /* #define STM32F302xE */   /*!< STM32F302CE, STM32F302RE, and STM32F302VE Devices */
-     #define STM32F303x8      /*!< STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8, 
-                                   STM32F303R6 and STM32F303R8 Devices */
-  /* #define STM32F303xC */   /*!< STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC, STM32F303VB and STM32F303VC Devices */
-  /* #define STM32F303xE */   /*!< STM32F303RE, STM32F303VE and STM32F303ZE Devices */
-  /* #define STM32F373xC */   /*!< STM32F373C8, STM32F373CB, STM32F373CC, STM32F373R8, STM32F373RB, STM32F373RC,
-                                   STM32F373V8, STM32F373VB and STM32F373VC Devices */
-  /* #define STM32F334x8 */   /*!< STM32F334C4, STM32F334C6, STM32F334C8, STM32F334R4, STM32F334R6 and STM32F334R8 Devices */
-  /* #define STM32F318xx */   /*!< STM32F318K8, STM32F318C8: STM32F301x8 with regulator off: STM32F318xx Devices */
-  /* #define STM32F328xx */   /*!< STM32F328C8, STM32F328R8: STM32F334x8 with regulator off: STM32F328xx Devices */
-  /* #define STM32F358xx */   /*!< STM32F358CC, STM32F358RC, STM32F358VC: STM32F303xC with regulator off: STM32F358xx Devices */
-  /* #define STM32F378xx */   /*!< STM32F378CC, STM32F378RC, STM32F378VC: STM32F373xC with regulator off: STM32F378xx Devices */
-  /* #define STM32F398xx */   /*!< STM32F398CE, STM32F398RE, STM32F398VE: STM32F303xE with regulator off: STM32F398xx Devices */
-#endif
-   
-/*  Tip: To avoid modifying this file each time you need to switch between these
-        devices, you can define the device in your toolchain compiler preprocessor.
-  */
-#if !defined  (USE_HAL_DRIVER)
-/**
- * @brief Comment the line below if you will not use the peripherals drivers.
-   In this case, these drivers will not be included and the application code will 
-   be based on direct access to peripherals registers 
-   */
-#define USE_HAL_DRIVER
-#endif /* USE_HAL_DRIVER */
-
-/**
-  * @brief CMSIS Device version number V2.1.0
-  */
-#define __STM32F3xx_CMSIS_DEVICE_VERSION_MAIN   (0x02) /*!< [31:24] main version */                                  
-#define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB1   (0x01) /*!< [23:16] sub1 version */
-#define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
-#define __STM32F3xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
-#define __STM32F3xx_CMSIS_DEVICE_VERSION        ((__CMSIS_DEVICE_VERSION_MAIN     << 24)\
-                                      |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
-                                      |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
-                                      |(__CMSIS_DEVICE_HAL_VERSION_RC))
-                                             
-/**
-  * @}
-  */
-
-/** @addtogroup Device_Included
-  * @{
-  */
-
-#if defined(STM32F301x8)
-  #include "stm32f301x8.h"
-#elif defined(STM32F302x8)
-  #include "stm32f302x8.h"
-#elif defined(STM32F302xC)
-  #include "stm32f302xc.h"
-#elif defined(STM32F302xE)
-  #include "stm32f302xe.h"
-#elif defined(STM32F303x8)
-  #include "stm32f303x8.h"
-#elif defined(STM32F303xC)
-  #include "stm32f303xc.h"
-#elif defined(STM32F303xE)
-  #include "stm32f303xe.h"
-#elif defined(STM32F373xC)
-  #include "stm32f373xc.h"
-#elif defined(STM32F334x8)
-  #include "stm32f334x8.h"
-#elif defined(STM32F318xx)
-  #include "stm32f318xx.h"
-#elif defined(STM32F328xx)
-  #include "stm32f328xx.h"
-#elif defined(STM32F358xx)
-  #include "stm32f358xx.h"
-#elif defined(STM32F378xx)
-  #include "stm32f378xx.h"
-#elif defined(STM32F398xx)
-  #include "stm32f398xx.h"
-#else
- #error "Please select first the target STM32F3xx device used in your application (in stm32f3xx.h file)"
-#endif
-
-/**
-  * @}
-  */
-
-/** @addtogroup Exported_types
-  * @{
-  */ 
-typedef enum 
-{
-  RESET = 0, 
-  SET = !RESET
-} FlagStatus, ITStatus;
-
-typedef enum 
-{
-  DISABLE = 0, 
-  ENABLE = !DISABLE
-} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum 
-{
-  ERROR = 0, 
-  SUCCESS = !ERROR
-} ErrorStatus;
-
-/**
-  * @}
-  */
-
-
-/** @addtogroup Exported_macros
-  * @{
-  */
-#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
-
-#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
-
-#define READ_BIT(REG, BIT)    ((REG) & (BIT))
-
-#define CLEAR_REG(REG)        ((REG) = (0x0))
-
-#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
-
-#define READ_REG(REG)         ((REG))
-
-#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
-
-#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
-
-
-#if defined (USE_HAL_DRIVER)
- #include "stm32f3xx_hal.h"
-#endif /* USE_HAL_DRIVER */
-
-
-/**
-  * @}
-  */
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32F3xx_H */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/