works through pushing box to log data to google spreadsheet
Dependencies: MBed_Adafruit-GPS-Library SDFileSystem mbed
Fork of GPR_Interface by
GSMLibrary.h
- Committer:
- DeWayneDennis
- Date:
- 2015-10-21
- Revision:
- 11:045cb766d9a5
File content as of revision 11:045cb766d9a5:
#ifndef GSMLIBRARY_H #define GSMLIBRARY_H #include "mbed.h" #define TIME_CONST 1 //Specify length of each GSM tick (currently 1 seconds in our debugger) #define SECONDS_TIMEOUT 30 #define SMS_END_CHAR "\x1A" //Character that must be appended to end of text message before it will be sent #define SMS_ESCAPE_CHAR "\x1A" //Character that can be appended to end of text message to abort sending it enum gsm_states{GSM_INITIALIZE, GSM_AT_OK, //Make sure communication is established with GSM GSM_AT_CSQ, //Check signal strength GSM_AT_CREG, //Check if phone is connected to network GSM_AT_CNMI, //Turn off incoming SMS notifications GSM_AT_CMGF, //Change to text message mode GSM_READ_MSG, //Check for new messages. GSM_AT_CMGS, //Input phone number and indicate beginning of SMS message body GSM_AT_SENDSMS, //Write message, finish with SMS_END_CHAR GSM_DEL_R_MSGS //Delete unread messages (if present) }; //GSM state machine void gsm_tick(); bool gsm_timeOut(); void gsm_printState(); void gsm_nextStateLogic(); void gsm_mealyOutputs(); //Initialize DMA data transfer, and UART3. void gsm_initialize(); //returns 1 for ready to send again, 0 for busy. bool gsm_ready(); //Have the GSM send data - L = long, S = short, hh/mm/ss for time, "lat ns" for latitute, "lon we" for longitude void gsm_send_data(float L, float Lref, float S, float Sref, int hh, int mm, int ss, float lat, char ns, float lon, char we); //Brings state machine back to initialize state (notice this is a bit different than the initialize function) //This will set flags to their initial values and prepare gsm to start anew. void gsm_reset(); //For debugging: print registers related to DMA and UART setup void print_registers(); #endif