Host library for controlling a WiConnect enabled Wi-Fi module.

Dependents:   wiconnect-ota_example wiconnect-web_setup_example wiconnect-test-console wiconnect-tcp_server_example ... more

internal/WiconnectCommands.h

Committer:
dan_ackme
Date:
2014-09-06
Revision:
24:e27e23297f02
Parent:
16:7f1d6d359787
Child:
27:b63f5a9cdefa

File content as of revision 24:e27e23297f02:

/**
 * ACKme WiConnect Host Library is licensed under the BSD licence: 
 * 
 * Copyright (c)2014 ACKme Networks.
 * All rights reserved. 
 * 
 * Redistribution and use in source and binary forms, with or without modification, 
 * are permitted provided that the following conditions are met: 
 * 
 * 1. Redistributions of source code must retain the above copyright notice, 
 * this list of conditions and the following disclaimer. 
 * 2. Redistributions in binary form must reproduce the above copyright notice, 
 * this list of conditions and the following disclaimer in the documentation 
 * and/or other materials provided with the distribution. 
 * 3. The name of the author may not be used to endorse or promote products 
 * derived from this software without specific prior written permission. 
 * 
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED 
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
 * OF SUCH DAMAGE.
 */
#pragma once




#define CMD_SAVE                            "save"
#define CMD_GET_VERSION                     "ver"


#define CMD_SET_SYSTEM_COMMAND_MODE         "set system.cmd.mode %s"
#define CMD_SET_NETWORK_DHCP                "set network.dhcp %d"
#define CMD_SET_STATIC_IP                   "set static.ip %d.%d.%d.%d"
#define CMD_SET_STATIC_GATEWAY              "set static.netmask %d.%d.%d.%d"
#define CMD_SET_STATIC_NETMASK              "set static.gatewat %d.%d.%d.%d"


#define CMD_GET_NETWORK_STATUS              "get network.status"