Diff: sdk/mbed/target_config.h

Revision:

28:3c52f578708a

Parent:

27:b63f5a9cdefa

Child:

29:b6af04b77a56

--- a/sdk/mbed/target_config.h	Thu Oct 23 15:21:50 2014 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,92 +0,0 @@
-/**
- * ACKme WiConnect Host Library is licensed under the BSD licence: 
- * 
- * Copyright (c)2014 ACKme Networks.
- * All rights reserved. 
- * 
- * Redistribution and use in source and binary forms, with or without modification, 
- * are permitted provided that the following conditions are met: 
- * 
- * 1. Redistributions of source code must retain the above copyright notice, 
- * this list of conditions and the following disclaimer. 
- * 2. Redistributions in binary form must reproduce the above copyright notice, 
- * this list of conditions and the following disclaimer in the documentation 
- * and/or other materials provided with the distribution. 
- * 3. The name of the author may not be used to endorse or promote products 
- * derived from this software without specific prior written permission. 
- * 
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED 
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
- * OF SUCH DAMAGE.
- */
-#pragma once
-
-
-// The BAUD rate your PC/MAC/Linux terminal uses with the eval board
-#define CONSOLE_BAUD 115200
-
-
-// Uncomment this to enable WiConnect serial interface hardware flow control
-// NOTE: your platform must support the serial flow control api functions
-//#define ENABLE_FLOW_CONTROL
-
-
-#define WICONNECT_INTERNAL_BUFFER_SIZE (4*1024)
-#define WICONNECT_SERIAL_RX_BUFFER_SIZE (4*1024)
-
-#define DEFAULT_CMD_GETCHAR_TIMEOUT 250
-#define DEFAULT_COMMAND_LINE_LENGTH_MAX 128
-#define DEFAULT_COMMAND_MAX_HISTORY 16
-#define DEFAULT_CMD_PROMPT_STR "> "
-#define DEFAULT_COMMAND_MAX_ARGV 16
-
-#define TEST_NONBLOCKING_API false
-#define TEST_BUFFER_LENGTH 4*1024
-
-
-//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-// Seabass Target Configuration
-#ifdef TARGET_SEABASS
-
-#define WICONNECT_TX_PIN PA_9
-#define WICONNECT_RX_PIN PA_10
-#define WICONNECT_RESET_PIN PB_0
-#define WICONNECT_WAKE_PIN NC
-
-#ifdef ENABLE_FLOW_CONTROL
-#define WICONNECT_CTS_PIN PA_11
-#define WICONNECT_RTS_PIN PA_12
-#else
-#define WICONNECT_CTS_PIN NC
-#define WICONNECT_RTS_PIN NC
-#endif
-
-#endif
-
-
-//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-// Nucleo F401RE Target Configuration
-#ifdef TARGET_NUCLEO_F401RE
-
-#define WICONNECT_TX_PIN PA_9
-#define WICONNECT_RX_PIN PA_10
-#define WICONNECT_RESET_PIN PC_7
-#define WICONNECT_WAKE_PIN NC
-
-#ifdef ENABLE_FLOW_CONTROL
-#define WICONNECT_CTS_PIN PA_11
-#define WICONNECT_RTS_PIN PA_12
-#else
-#define WICONNECT_CTS_PIN NC
-#define WICONNECT_RTS_PIN NC
-#endif
-
-#endif
-