6CM8
proyecto LCD
Diff: TextLCD.h
- Revision:
- 9:2db641efba7e
- Parent:
- 8:308d188a2d3a
--- a/TextLCD.h Thu Jan 02 21:07:01 2014 +0000
+++ b/TextLCD.h Wed Nov 13 21:28:23 2019 +0000
@@ -1,5 +1,23 @@
-/* mbed TextLCD Library, for a 4-bit LCD based on HD44780
+/* mbed TextLCD Library, for LCDs based on HD44780 controllers
* Copyright (c) 2007-2010, sford, http://mbed.org
+ * 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs
+ * 2013, v02: WH, Added I2C and SPI bus interfaces
+ * 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers
+ * 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess
+ * 2013, v05: WH, Added support for 8x2B, added some UDCs
+ * 2013, v06: WH, Added support for devices that use internal DC/DC converters
+ * 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT
+ * 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined DigitalOut pins
+ * 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032
+ * 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module
+ * 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers
+ * 2014, v12: WH, Added support for native I2C controller PCF2119 and native I2C/SPI controllers SSD1803, ST7036, added setContrast method (by JH1PJL) for supported devices (eg ST7032i)
+ * 2014, v13: WH, Added support for controllers US2066/SSD1311 (OLED), added setUDCBlink() method for supported devices (eg SSD1803), fixed issue in setPower()
+ * 2014, v14: WH, Added support for PT6314 (VFD), added setOrient() method for supported devices (eg SSD1803, US2066), added Double Height lines for supported devices,
+ * added 16 UDCs for supported devices (eg PCF2103), moved UDC defines to TextLCD_UDC file, added TextLCD_Config.h for feature and footprint settings.
+ * 2014, v15: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define
+ * 2014, v16: WH, Added ST7070 and KS0073 support, added setIcon(), clrIcon() and setInvert() method for supported devices
+ * 2015, v17: WH, Clean up low-level _writeCommand() and _writeData(), Added support for alternative fonttables (eg PCF21XX), Added ST7066_ACM controller for ACM1602 module
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
@@ -24,42 +42,263 @@
#define MBED_TEXTLCD_H
#include "mbed.h"
+#include "TextLCD_Config.h"
+#include "TextLCD_UDC.h"
-/** A TextLCD interface for driving 4-bit HD44780-based LCDs
+/** A TextLCD interface for driving 4-bit HD44780-based LCDs
*
- * Currently supports 16x2, 20x2 and 20x4 panels
+ * Currently supports 8x1, 8x2, 12x3, 12x4, 16x1, 16x2, 16x3, 16x4, 20x2, 20x4, 24x1, 24x2, 24x4, 40x2 and 40x4 panels.
+ * Interface options include direct mbed pins, I2C portexpander (PCF8474/PCF8574A or MCP23008) or SPI bus shiftregister (74595).
+ * Supports some controllers with native I2C or SPI interface. Supports some controllers that provide internal DC/DC converters for VLCD or VLED.
+ * Supports some controllers that feature programmable contrast control, powerdown, blinking UDCs and/or top/down orientation modes.
*
* @code
* #include "mbed.h"
* #include "TextLCD.h"
*
- * TextLCD lcd(p10, p12, p15, p16, p29, p30); // rs, e, d4-d7
- *
+ * // I2C Communication
+ * I2C i2c_lcd(p28,p27); // SDA, SCL
+ *
+ * // SPI Communication
+ * SPI spi_lcd(p5, NC, p7); // MOSI, MISO, SCLK
+ *
+ * //TextLCD lcd(p15, p16, p17, p18, p19, p20); // RS, E, D4-D7, LCDType=LCD16x2, BL=NC, E2=NC, LCDTCtrl=HD44780
+ * //TextLCD_SPI lcd(&spi_lcd, p8, TextLCD::LCD40x4); // SPI bus, 74595 expander, CS pin, LCD Type
+ * TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD20x4); // I2C bus, PCF8574 Slaveaddress, LCD Type
+ * //TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD16x2, TextLCD::WS0010); // I2C bus, PCF8574 Slaveaddress, LCD Type, Device Type (OLED)
+ * //TextLCD_SPI_N lcd(&spi_lcd, p8, p9); // SPI bus, CS pin, RS pin, LCDType=LCD16x2, BL=NC, LCDTCtrl=ST7032_3V3
+ * //TextLCD_I2C_N lcd(&i2c_lcd, ST7032_SA, TextLCD::LCD16x2, NC, TextLCD::ST7032_3V3); // I2C bus, Slaveaddress, LCD Type, BL=NC, LCDTCtrl=ST7032_3V3
+ * //TextLCD_SPI_N_3_24 lcd(&spi_lcd, p8, TextLCD::LCD20x4D, NC, TextLCD::SSD1803_3V3); // SPI bus, CS pin, LCDType=LCD20x4D, BL=NC, LCDTCtrl=SSD1803
+ * //TextLCD_SPI_N_3_24 lcd(&spi_lcd, p8, TextLCD::LCD20x2, NC, TextLCD::US2066_3V3); // SPI bus, CS pin, LCDType=LCD20x2, BL=NC, LCDTCtrl=US2066 (OLED)
+ *
* int main() {
- * lcd.printf("Hello World!\n");
+ * lcd.printf("Hello World!\n");
* }
* @endcode
*/
-class TextLCD : public Stream {
+
+//The TextLCD_Config.h file selects hardware interface options to reduce memory footprint
+//and provides Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces.
+//The LCD and serial portexpanders should be wired accordingly.
+
+/* LCD Type information on Rows, Columns and Variant. This information is encoded in
+ * an int and used for the LCDType enumerators in order to simplify code maintenance */
+// Columns encoded in b7..b0
+#define LCD_T_COL_MSK 0x000000FF
+#define LCD_T_C6 0x00000006
+#define LCD_T_C8 0x00000008
+#define LCD_T_C10 0x0000000A
+#define LCD_T_C12 0x0000000C
+#define LCD_T_C16 0x00000010
+#define LCD_T_C20 0x00000014
+#define LCD_T_C24 0x00000018
+#define LCD_T_C32 0x00000020
+#define LCD_T_C40 0x00000028
+
+// Rows encoded in b15..b8
+#define LCD_T_ROW_MSK 0x0000FF00
+#define LCD_T_R1 0x00000100
+#define LCD_T_R2 0x00000200
+#define LCD_T_R3 0x00000300
+#define LCD_T_R4 0x00000400
+
+// Addressing mode encoded in b19..b16
+#define LCD_T_ADR_MSK 0x000F0000
+#define LCD_T_A 0x00000000 /*Mode A Default 1, 2 or 4 line display */
+#define LCD_T_B 0x00010000 /*Mode B, Alternate 8x2 (actually 16x1 display) */
+#define LCD_T_C 0x00020000 /*Mode C, Alternate 16x1 (actually 8x2 display) */
+#define LCD_T_D 0x00030000 /*Mode D, Alternate 3 or 4 line display (12x4, 20x4, 24x4) */
+#define LCD_T_D1 0x00040000 /*Mode D1, Alternate 3 out of 4 line display (12x3, 20x3, 24x3) */
+#define LCD_T_E 0x00050000 /*Mode E, 40x4 display (actually two 40x2) */
+#define LCD_T_F 0x00060000 /*Mode F, 16x3 display (actually 24x2) */
+#define LCD_T_G 0x00070000 /*Mode G, 16x3 display */
+
+/* LCD Ctrl information on interface support and features. This information is encoded in
+ * an int and used for the LCDCtrl enumerators in order to simplify code maintenance */
+// Interface encoded in b31..b24
+#define LCD_C_BUS_MSK 0xFF000000
+#define LCD_C_PAR 0x01000000 /*Parallel 4 or 8 bit data, E pin, RS pin, RW=GND */
+#define LCD_C_SPI3_8 0x02000000 /*SPI 3 line (MOSI, SCL, CS pins), 8 bits (Count Command initiates Data transfer) */
+#define LCD_C_SPI3_9 0x04000000 /*SPI 3 line (MOSI, SCL, CS pins), 9 bits (RS + 8 Data) */
+#define LCD_C_SPI3_10 0x08000000 /*SPI 3 line (MOSI, SCL, CS pins), 10 bits (RS, RW + 8 Data) */
+#define LCD_C_SPI3_16 0x10000000 /*SPI 3 line (MOSI, SCL, CS pins), 16 bits (RS, RW + 8 Data) */
+#define LCD_C_SPI3_24 0x20000000 /*SPI 3 line (MOSI, SCL, CS pins), 24 bits (RS, RW + 8 Data) */
+#define LCD_C_SPI4 0x40000000 /*SPI 4 line (MOSI, SCL, CS, RS pin), RS pin + 8 Data */
+#define LCD_C_I2C 0x80000000 /*I2C (SDA, SCL pin), 8 control bits (Co, RS, RW) + 8 Data */
+// Features encoded in b23..b16
+#define LCD_C_FTR_MSK 0x00FF0000
+#define LCD_C_BST 0x00010000 /*Booster */
+#define LCD_C_CTR 0x00020000 /*Contrast Control */
+#define LCD_C_ICN 0x00040000 /*Icons */
+#define LCD_C_PDN 0x00080000 /*Power Down */
+// Fonttable encoded in b15..b12
+#define LCD_C_FNT_MSK 0x0000F000
+#define LCD_C_FT0 0x00000000 /*Default */
+#define LCD_C_FT1 0x00001000 /*Font1 */
+#define LCD_C_FT2 0x00002000 /*Font2 */
+
+/** A TextLCD interface for driving 4-bit HD44780-based LCDs
+ *
+ * @brief Currently supports 8x1, 8x2, 12x2, 12x3, 12x4, 16x1, 16x2, 16x3, 16x4, 20x2, 20x4, 24x2, 24x4, 40x2 and 40x4 panels
+ * Interface options include direct mbed pins, I2C portexpander (PCF8474/PCF8574A or MCP23008) or
+ * SPI bus shiftregister (74595) or native I2C or SPI interfaces for some supported devices.
+ */
+class TextLCD_Base : public Stream {
+//class TextLCD_Base {
+
+//Unfortunately the following #define selection breaks Doxygen !!!
+//Add it manually when you want to disable the Stream inheritance
+//#if (LCD_PRINTF == 1)
+//class TextLCD_Base : public Stream {
+//#else
+//class TextLCD_Base {
+//#endif
+
public:
/** LCD panel format */
+ // The commented out types exist but have not yet been tested with the library
enum LCDType {
- LCD16x2 /**< 16x2 LCD panel (default) */
- , LCD16x2B /**< 16x2 LCD panel alternate addressing */
- , LCD20x2 /**< 20x2 LCD panel */
- , LCD20x4 /**< 20x4 LCD panel */
+// LCD6x1 = (LCD_T_A | LCD_T_C6 | LCD_T_R1), /**< 6x1 LCD panel */
+// LCD6x2 = (LCD_T_A | LCD_T_C6 | LCD_T_R2), /**< 6x2 LCD panel */
+ LCD8x1 = (LCD_T_A | LCD_T_C8 | LCD_T_R1), /**< 8x1 LCD panel */
+ LCD8x2 = (LCD_T_A | LCD_T_C8 | LCD_T_R2), /**< 8x2 LCD panel */
+ LCD8x2B = (LCD_T_D | LCD_T_C8 | LCD_T_R2), /**< 8x2 LCD panel (actually 16x1) */
+ LCD12x1 = (LCD_T_A | LCD_T_C12 | LCD_T_R1), /**< 12x1 LCD panel */
+ LCD12x2 = (LCD_T_A | LCD_T_C12 | LCD_T_R2), /**< 12x2 LCD panel */
+ LCD12x3D = (LCD_T_D | LCD_T_C12 | LCD_T_R3), /**< 12x3 LCD panel, special mode PCF21XX, KS0073 */
+ LCD12x3D1 = (LCD_T_D1 | LCD_T_C12 | LCD_T_R3), /**< 12x3 LCD panel, special mode PCF21XX, KS0073 */
+// LCD12x3G = (LCD_T_G | LCD_T_C12 | LCD_T_R3), /**< 12x3 LCD panel, special mode ST7036 */
+ LCD12x4 = (LCD_T_A | LCD_T_C12 | LCD_T_R4), /**< 12x4 LCD panel */
+ LCD12x4D = (LCD_T_B | LCD_T_C12 | LCD_T_R4), /**< 12x4 LCD panel, special mode PCF21XX, KS0073 */
+ LCD16x1 = (LCD_T_A | LCD_T_C16 | LCD_T_R1), /**< 16x1 LCD panel */
+ LCD16x1C = (LCD_T_C | LCD_T_C16 | LCD_T_R1), /**< 16x1 LCD panel (actually 8x2) */
+ LCD16x2 = (LCD_T_A | LCD_T_C16 | LCD_T_R2), /**< 16x2 LCD panel (default) */
+// LCD16x2B = (LCD_T_B | LCD_T_C16 | LCD_T_R2), /**< 16x2 LCD panel, alternate addressing, wrong.. */
+ LCD16x3D = (LCD_T_D | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel, special mode SSD1803 */
+// LCD16x3D1 = (LCD_T_D1 | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel, special mode SSD1803 */
+ LCD16x3F = (LCD_T_F | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel (actually 24x2) */
+ LCD16x3G = (LCD_T_G | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel, special mode ST7036 */
+ LCD16x4 = (LCD_T_A | LCD_T_C16 | LCD_T_R4), /**< 16x4 LCD panel */
+// LCD16x4D = (LCD_T_D | LCD_T_C16 | LCD_T_R4), /**< 16x4 LCD panel, special mode SSD1803 */
+ LCD20x1 = (LCD_T_A | LCD_T_C20 | LCD_T_R1), /**< 20x1 LCD panel */
+ LCD20x2 = (LCD_T_A | LCD_T_C20 | LCD_T_R2), /**< 20x2 LCD panel */
+// LCD20x3 = (LCD_T_A | LCD_T_C20 | LCD_T_R3), /**< 20x3 LCD panel */
+// LCD20x3D = (LCD_T_D | LCD_T_C20 | LCD_T_R3), /**< 20x3 LCD panel, special mode SSD1803 */
+// LCD20x3D1 = (LCD_T_D1 | LCD_T_C20 | LCD_T_R3), /**< 20x3 LCD panel, special mode SSD1803 */
+ LCD20x4 = (LCD_T_A | LCD_T_C20 | LCD_T_R4), /**< 20x4 LCD panel */
+ LCD20x4D = (LCD_T_D | LCD_T_C20 | LCD_T_R4), /**< 20x4 LCD panel, special mode SSD1803 */
+ LCD24x1 = (LCD_T_A | LCD_T_C24 | LCD_T_R1), /**< 24x1 LCD panel */
+ LCD24x2 = (LCD_T_A | LCD_T_C24 | LCD_T_R2), /**< 24x2 LCD panel */
+// LCD24x3D = (LCD_T_D | LCD_T_C24 | LCD_T_R3), /**< 24x3 LCD panel */
+// LCD24x3D1 = (LCD_T_D | LCD_T_C24 | LCD_T_R3), /**< 24x3 LCD panel */
+ LCD24x4D = (LCD_T_D | LCD_T_C24 | LCD_T_R4), /**< 24x4 LCD panel, special mode KS0078 */
+// LCD32x1 = (LCD_T_A | LCD_T_C32 | LCD_T_R1), /**< 32x1 LCD panel */
+// LCD32x1C = (LCD_T_C | LCD_T_C32 | LCD_T_R1), /**< 32x1 LCD panel (actually 16x2) */
+// LCD32x2 = (LCD_T_A | LCD_T_C32 | LCD_T_R2), /**< 32x2 LCD panel */
+// LCD32x4 = (LCD_T_A | LCD_T_C32 | LCD_T_R4), /**< 32x4 LCD panel */
+// LCD40x1 = (LCD_T_A | LCD_T_C40 | LCD_T_R1), /**< 40x1 LCD panel */
+// LCD40x1C = (LCD_T_C | LCD_T_C40 | LCD_T_R1), /**< 40x1 LCD panel (actually 20x2) */
+ LCD40x2 = (LCD_T_A | LCD_T_C40 | LCD_T_R2), /**< 40x2 LCD panel */
+ LCD40x4 = (LCD_T_E | LCD_T_C40 | LCD_T_R4) /**< 40x4 LCD panel, Two controller version */
};
- /** Create a TextLCD interface
+
+ /** LCD Controller Device */
+ enum LCDCtrl {
+ HD44780 = 0 | LCD_C_PAR, /**< HD44780 or full equivalent (default) */
+ AC780 = 1 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_PDN), /**< AC780/KS0066i 4/8 bit, SPI, I2C */
+ AIP31068 = 2 | (LCD_C_SPI3_9 | LCD_C_I2C | LCD_C_BST), /**< AIP31068 I2C, SPI3 */
+ KS0073 = 3 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_PDN), /**< KS0073 4/8 bit, SPI3 */
+ KS0078 = 4 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_PDN), /**< KS0078 24x4 support, 4/8 bit, SPI3 */
+ PCF2103_3V3 = 5 | (LCD_C_PAR | LCD_C_I2C), /**< PCF2103 3V3 no Booster, 4/8 bit, I2C */
+ PCF2113_3V3 = 6 | (LCD_C_PAR | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< PCF2113 3V3 with Booster, 4/8 bit, I2C */
+ PCF2116_3V3 = 7 | (LCD_C_PAR | LCD_C_I2C | LCD_C_BST), /**< PCF2116 3V3 with Booster, 4/8 bit, I2C */
+ PCF2116_5V = 8 | (LCD_C_PAR | LCD_C_I2C), /**< PCF2116 5V no Booster, 4/8 bit, I2C */
+ PCF2116C_5V = 9 | (LCD_C_PAR | LCD_C_I2C | LCD_C_BST) | LCD_C_FT1, /**< PCF2116C 3V3 with Booster, 4/8 bit, I2C */
+ PCF2119_3V3 = 10 | (LCD_C_PAR | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< PCF2119 3V3 with Booster, 4/8 bit, I2C */
+// PCF2119C_3V3 = 11 | (LCD_C_PAR | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), LCD_C_FT1, /**< PCF2119K 3V3 with Booster, 4/8 bit, I2C */
+// PCF2119_5V = 12 | (LCD_C_PAR | LCD_C_I2C), /**< PCF2119 5V no Booster, 4/8 bit, I2C */
+ PT6314 = 13 | (LCD_C_PAR | LCD_C_SPI3_16 | LCD_C_CTR), /**< PT6314 VFD, 4/8 bit, SPI3 */
+ SSD1803_3V3 = 14 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR | LCD_C_PDN), /**< SSD1803 3V3 with Booster, 4/8 bit, I2C, SPI3 */
+// SSD1803_5V = 15 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR | LCD_C_PDN), /**< SSD1803 3V3 with Booster, 4/8 bit, I2C, SPI3 */
+ ST7032_3V3 = 16 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< ST7032 3V3 with Booster, 4/8 bit, SPI4, I2C */
+ ST7032_5V = 17 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_CTR), /**< ST7032 5V no Booster, 4/8 bit, SPI4, I2C */
+ ST7036_3V3 = 18 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< ST7036 3V3 with Booster, 4/8 bit, SPI4, I2C */
+ ST7036_5V = 19 | (LCD_C_PAR | LCD_C_SPI4 | LCD_C_I2C | LCD_C_BST | LCD_C_CTR), /**< ST7036 5V no Booster, 4/8 bit, SPI4, I2C */
+ ST7066_ACM = 20 | (LCD_C_PAR | LCD_C_I2C), /**< ST7066 4/8 bit, I2C on ACM1602 using a PIC */
+ ST7070 = 21 | (LCD_C_PAR | LCD_C_SPI3_8 | LCD_C_SPI4), /**< ST7070 4/8 bit, SPI3 */
+ US2066_3V3 = 22 | (LCD_C_PAR | LCD_C_SPI3_24 | LCD_C_I2C | LCD_C_CTR | LCD_C_PDN), /**< US2066/SSD1311 3V3, 4/8 bit, I2C, SPI3 */
+ WS0010 = 23 | (LCD_C_PAR | LCD_C_SPI3_10 | LCD_C_PDN) /**< WS0010/RS0010 OLED Controller, 4/8 bit, SPI3 */
+// WS0012 = 24 | (LCD_C_PAR | LCD_C_SPI3_10 | LCD_C_I2C | LCD_C_PDN), /**< WS0012 4/8 bit, SPI, I2C */
+
+ };
+
+
+ /** LCD Cursor control */
+ enum LCDCursor {
+ CurOff_BlkOff = 0x00, /**< Cursor Off, Blinking Char Off */
+ CurOn_BlkOff = 0x02, /**< Cursor On, Blinking Char Off */
+ CurOff_BlkOn = 0x01, /**< Cursor Off, Blinking Char On */
+ CurOn_BlkOn = 0x03 /**< Cursor On, Blinking Char On */
+ };
+
+ /** LCD Display control */
+ enum LCDMode {
+ DispOff = 0x00, /**< Display Off */
+ DispOn = 0x04 /**< Display On */
+ };
+
+ /** LCD Backlight control */
+ enum LCDBacklight {
+ LightOff, /**< Backlight Off */
+ LightOn /**< Backlight On */
+ };
+
+ /** LCD Blink control (UDC), supported for some Controllers */
+ enum LCDBlink {
+ BlinkOff, /**< Blink Off */
+ BlinkOn /**< Blink On */
+ };
+
+ /** LCD Orientation control, supported for some Controllers */
+ enum LCDOrient {
+ Top, /**< Top view */
+ Bottom /**< Upside down view */
+ };
+
+ /** LCD BigFont control, supported for some Controllers */
+ enum LCDBigFont {
+ None, /**< no lines */
+ TopLine, /**< 1+2 line */
+ CenterLine, /**< 2+3 line */
+ BottomLine, /**< 2+3 line or 3+4 line */
+ TopBottomLine /**< 1+2 line and 3+4 line */
+ };
+
+
+ /** Convert ASCII character code to the LCD fonttable code
*
- * @param rs Instruction/data control line
- * @param e Enable line (clock)
- * @param d4-d7 Data lines for using as a 4-bit interface
- * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param c The character to write to the display
+ * @return The character code for the specific fonttable of the controller
*/
- TextLCD(PinName rs, PinName e, PinName d4, PinName d5, PinName d6, PinName d7, LCDType type = LCD16x2);
+ int ASCII_2_LCD (int c);
+
+#if(LCD_PRINTF != 1)
+ /** Write a character to the LCD
+ *
+ * @param c The character to write to the display
+ */
+ int putc(int c);
+
+ /** Write a raw string to the LCD
+ *
+ * @param string text, may be followed by variables to emulate formatting the string.
+ * However, printf formatting is NOT supported and variables will be ignored!
+ */
+ int printf(const char* text, ...);
+#else
#if DOXYGEN_ONLY
/** Write a character to the LCD
*
@@ -67,45 +306,913 @@
*/
int putc(int c);
- /** Write a formated string to the LCD
+ /** Write a formatted string to the LCD
*
* @param format A printf-style format string, followed by the
- * variables to use in formating the string.
+ * variables to use in formatting the string.
*/
- int printf(const char* format, ...);
+ int printf(const char* format, ...);
#endif
+
+#endif
- /** Locate to a screen column and row
+ /** Locate cursor to a screen column and row
*
* @param column The horizontal position from the left, indexed from 0
* @param row The vertical position from the top, indexed from 0
*/
void locate(int column, int row);
- /** Clear the screen and locate to 0,0 */
+ /** Return the memoryaddress of screen column and row location
+ *
+ * @param column The horizontal position from the left, indexed from 0
+ * @param row The vertical position from the top, indexed from 0
+ * @return The memoryaddress of screen column and row location
+ */
+ int getAddress(int column, int row);
+
+ /** Set the memoryaddress of screen column and row location
+ *
+ * @param column The horizontal position from the left, indexed from 0
+ * @param row The vertical position from the top, indexed from 0
+ */
+ void setAddress(int column, int row);
+
+ /** Clear the screen and locate to 0,0
+ */
void cls();
+ /** Return the number of rows
+ *
+ * @return The number of rows
+ */
int rows();
- int columns();
+
+ /** Return the number of columns
+ *
+ * @return The number of columns
+ */
+ int columns();
+
+ /** Set the Cursormode
+ *
+ * @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn)
+ */
+ void setCursor(LCDCursor cursorMode);
+
+ /** Set the Displaymode
+ *
+ * @param displayMode The Display mode (DispOff, DispOn)
+ */
+ void setMode(LCDMode displayMode);
+
+ /** Set the Backlight mode
+ *
+ * @param backlightMode The Backlight mode (LightOff, LightOn)
+ */
+ void setBacklight(LCDBacklight backlightMode);
+
+ /** Set User Defined Characters (UDC)
+ *
+ * @param unsigned char c The Index of the UDC (0..7) for HD44780 clones and (0..15) for some more advanced controllers
+ * @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits for bitpattern and 3 bits for blinkmode (advanced types))
+ */
+ void setUDC(unsigned char c, char *udc_data);
+
+ /** Set UDC Blink and Icon blink
+ * setUDCBlink method is supported by some compatible devices (eg SSD1803)
+ *
+ * @param blinkMode The Blink mode (BlinkOff, BlinkOn)
+ */
+ void setUDCBlink(LCDBlink blinkMode);
+
+ /** Set Contrast
+ * setContrast method is supported by some compatible devices (eg ST7032i) that have onboard LCD voltage generation
+ * Code imported from fork by JH1PJL
+ *
+ * @param unsigned char c contrast data (6 significant bits, valid range 0..63, Value 0 will disable the Vgen)
+ * @return none
+ */
+ void setContrast(unsigned char c = LCD_DEF_CONTRAST);
+
+ /** Set Power
+ * setPower method is supported by some compatible devices (eg SSD1803) that have power down modes
+ *
+ * @param bool powerOn Power on/off
+ * @return none
+ */
+ void setPower(bool powerOn = true);
+
+ /** Set Orient
+ * setOrient method is supported by some compatible devices (eg SSD1803, US2066) that have top/bottom view modes
+ *
+ * @param LCDOrient orient Orientation
+ * @return none
+ */
+ void setOrient(LCDOrient orient = Top);
+
+ /** Set Big Font
+ * setBigFont method is supported by some compatible devices (eg SSD1803, US2066)
+ *
+ * @param lines The selected Big Font lines (None, TopLine, CenterLine, BottomLine, TopBottomLine)
+ * Double height characters can be shown on lines 1+2, 2+3, 3+4 or 1+2 and 3+4
+ * Valid double height lines depend on the LCDs number of rows.
+ */
+ void setBigFont(LCDBigFont lines);
+
+ /** Set Icons
+ *
+ * @param unsigned char idx The Index of the icon pattern (0..15) for KS0073 and similar controllers
+ * and Index (0..31) for PCF2103 and similar controllers
+ * @param unsigned char data The bitpattern for the icons (6 lsb for KS0073 bitpattern (5 lsb for KS0078) and 2 msb for blinkmode)
+ * The bitpattern for the PCF2103 icons is 5 lsb (UDC 0..2) and 5 lsb for blinkmode (UDC 4..6)
+ */
+ void setIcon(unsigned char idx, unsigned char data);
+
+ /** Clear Icons
+ *
+ * @param none
+ * @return none
+ */
+ //@TODO Add support for 40x4 dual controller
+ void clrIcon();
+
+ /** Set Invert
+ * setInvert method is supported by some compatible devices (eg KS0073) to swap between black and white
+ *
+ * @param bool invertOn Invert on/off
+ * @return none
+ */
+ //@TODO Add support for 40x4 dual controller
+ void setInvert(bool invertOn);
protected:
+ /** LCD controller select, mainly used for LCD40x4
+ */
+ enum _LCDCtrl_Idx {
+ _LCDCtrl_0, /*< Primary */
+ _LCDCtrl_1, /*< Secondary */
+ };
+
+ /** LCD Datalength control to select between 4 or 8 bit data/commands, mainly used for native Serial interface */
+ enum _LCDDatalength {
+ _LCD_DL_4 = 0x00, /**< Datalength 4 bit */
+ _LCD_DL_8 = 0x10 /**< Datalength 8 bit */
+ };
+
+ /** Create a TextLCD_Base interface
+ * @brief Base class, can not be instantiated
+ *
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+ TextLCD_Base(LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
+
// Stream implementation functions
virtual int _putc(int value);
virtual int _getc();
- int address(int column, int row);
- void character(int column, int row, int c);
- void writeByte(int value);
- void writeCommand(int command);
- void writeData(int data);
+/** Medium level initialisation method for LCD controller
+ * @param _LCDDatalength dl sets the datalength of data/commands
+ * @return none
+ */
+ void _init(_LCDDatalength dl = _LCD_DL_4);
+
+/** Low level initialisation method for LCD controller
+ * Set number of lines, fonttype, no cursor etc
+ * The controller is accessed in 4-bit parallel mode either directly via mbed pins or through I2C or SPI expander.
+ * Some controllers also support native I2C or SPI interfaces.
+ *
+ * @param _LCDDatalength dl sets the 4 or 8 bit datalength of data/commands. Required for some native serial modes.
+ * @return none
+ */
+ void _initCtrl(_LCDDatalength dl = _LCD_DL_4);
+
+/** Low level character address set method
+ */
+ int _address(int column, int row);
+
+/** Low level cursor enable or disable method
+ */
+ void _setCursor(LCDCursor show);
+
+/** Low level method to store user defined characters for current controller
+ *
+ * @param unsigned char c The Index of the UDC (0..7) for HD44780 clones and (0..15) for some more advanced controllers
+ * @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits)
+ */
+ void _setUDC(unsigned char c, char *udc_data);
+
+/** Low level method to restore the cursortype and display mode for current controller
+ */
+ void _setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType);
+
+/** Low level nibble write operation to LCD controller (serial or parallel)
+ */
+ void _writeNibble(int value);
+
+/** Low level command byte write operation to LCD controller.
+ * Methods resets the RS bit and provides the required timing for the command.
+ */
+ void _writeCommand(int command);
+
+/** Low level data byte write operation to LCD controller (serial or parallel).
+ * Methods sets the RS bit and provides the required timing for the data.
+ */
+ void _writeData(int data);
+
+/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value) = 0;
+
+/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
+ * Set the RS pin ( 0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value) = 0;
+
+/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value) = 0;
+
+/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value) = 0;
+
+/** Low level byte write operation to LCD controller (serial or parallel)
+ * Depending on the RS pin this byte will be interpreted as data or command
+ */
+ virtual void _writeByte(int value);
+//Display type
+ LCDType _type; // Display type
+ int _nr_cols;
+ int _nr_rows;
+ int _addr_mode; // Addressing mode of LCDType, defines relation between display row,col and controller memory address
+
+//Display mode
+ LCDMode _currentMode;
+
+//Controller type
+ LCDCtrl _ctrl; // Controller type
+ int _font; // ASCII character fonttable
+
+//Controller select, mainly used for LCD40x4
+ _LCDCtrl_Idx _ctrl_idx;
+
+// Cursor
+ int _column;
+ int _row;
+ LCDCursor _currentCursor;
+
+// Function modes saved to allow switch between Instruction sets after initialisation time
+ int _function, _function_1, _function_x;
+
+// Icon, Booster mode and contrast saved to allow contrast change at later time
+// Only available for controllers with added features
+ int _icon_power, _contrast;
+};
+
+//--------- End TextLCD_Base -----------
+
+
+//--------- Start TextLCD Bus -----------
+
+/** Create a TextLCD interface for using regular mbed pins
+ *
+ */
+class TextLCD : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface for using regular mbed pins
+ *
+ * @param rs Instruction/data control line
+ * @param e Enable line (clock)
+ * @param d4-d7 Data lines for using as a 4-bit interface
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param e2 Enable2 line (clock for second controller, LCD40x4 only)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+ TextLCD(PinName rs, PinName e, PinName d4, PinName d5, PinName d6, PinName d7, LCDType type = LCD16x2, PinName bl = NC, PinName e2 = NC, LCDCtrl ctrl = HD44780);
+
+ /** Destruct a TextLCD interface for using regular mbed pins
+ *
+ * @param none
+ * @return none
+ */
+ virtual ~TextLCD();
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Regular mbed pins bus
+ */
DigitalOut _rs, _e;
BusOut _d;
- LCDType _type;
-
- int _column;
- int _row;
+
+/** Optional Hardware pins for the Backlight and LCD40x4 device
+ * Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
+ */
+ DigitalOut *_bl, *_e2;
};
+//----------- End TextLCD ---------------
+
+
+//--------- Start TextLCD_I2C -----------
+#if(LCD_I2C == 1) /* I2C Expander PCF8574/MCP23008 */
+
+/** Create a TextLCD interface using an I2C PCF8574 (or PCF8574A) or MCP23008 portexpander
+ *
+ */
+class TextLCD_I2C : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using an I2C PCF8574 (or PCF8574A) or MCP23008 portexpander
+ *
+ * @param i2c I2C Bus
+ * @param deviceAddress I2C slave address (PCF8574 (or PCF8574A) or MCP23008 portexpander, default = PCF8574_SA0 = 0x40)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+ TextLCD_I2C(I2C *i2c, char deviceAddress = PCF8574_SA0, LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
+
+private:
+
+/** Place the Enable bit in the databus shadowvalue
+ * Used for mbed I2C portexpander
+ * @param value data to write
+ * @return none
+ */
+ void _setEnableBit(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Place the 4bit data in the databus shadowvalue
+ * Used for mbed I2C portexpander
+ * @param value data to write
+ * @return none
+ */
+ void _setDataBits(int value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+//New optimized
+//Test faster _writeByte 0.11s vs 0.27s for a 20x4 fillscreen (PCF8574)
+//Test faster _writeByte 0.14s vs 0.34s for a 20x4 fillscreen (MCP23008)
+
+/** Low level writes to LCD serial bus expander
+ */
+ virtual void _writeByte(int value);
+
+/** Write data to MCP23008 I2C portexpander
+ * @param reg register to write
+ * @param value data to write
+ * @return none
+ */
+ void _writeRegister (int reg, int value);
+
+//I2C bus
+ I2C *_i2c;
+ char _slaveAddress;
+
+// Internal bus shadow value for serial bus only
+ char _lcd_bus;
+};
+#endif /* I2C Expander PCF8574/MCP23008 */
+
+//---------- End TextLCD_I2C ------------
+
+
+//--------- Start TextLCD_SPI -----------
+#if(LCD_SPI == 1) /* SPI Expander SN74595 */
+
+/** Create a TextLCD interface using an SPI 74595 portexpander
+ *
+ */
+class TextLCD_SPI : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using an SPI 74595 portexpander
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param ctrl LCD controller (default = HD44780)
+ */
+ TextLCD_SPI(SPI *spi, PinName cs, LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// Internal bus shadow value for serial bus only
+ char _lcd_bus;
+};
+#endif /* SPI Expander SN74595 */
+//---------- End TextLCD_SPI ------------
+
+
+//--------- Start TextLCD_I2C_N -----------
+#if(LCD_I2C_N == 1) /* Native I2C */
+
+/** Create a TextLCD interface using a controller with native I2C interface
+ *
+ */
+class TextLCD_I2C_N : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native I2C interface
+ *
+ * @param i2c I2C Bus
+ * @param deviceAddress I2C slave address (default = ST7032_SA = 0x7C)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7032_3V3)
+ */
+ TextLCD_I2C_N(I2C *i2c, char deviceAddress = ST7032_SA, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7032_3V3);
+
+ /** Destruct a TextLCD interface using a controller with native I2C interface
+ */
+ virtual ~TextLCD_I2C_N(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin ( 0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+//I2C bus
+ I2C *_i2c;
+ char _slaveAddress;
+
+// controlbyte to select between data and command. Internal shadow value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+
+};
+#endif /* Native I2C */
+//---------- End TextLCD_I2C_N ------------
+
+
+//--------- Start TextLCD_SPI_N -----------
+#if(LCD_SPI_N == 1) /* Native SPI bus */
+
+/** Create a TextLCD interface using a controller with native SPI4 interface
+ *
+ */
+class TextLCD_SPI_N : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI4 interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param rs Instruction/data control line
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7032_3V3)
+ */
+ TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7032_3V3);
+
+ /** Destruct a TextLCD interface using a controller with native SPI4 interface
+ */
+ virtual ~TextLCD_SPI_N(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+ DigitalOut _rs;
+
+//Backlight
+ DigitalOut *_bl;
+};
+#endif /* Native SPI bus */
+//---------- End TextLCD_SPI_N ------------
+
+
+//-------- Start TextLCD_SPI_N_3_8 --------
+#if(LCD_SPI_N_3_8 == 1) /* Native SPI bus */
+/** Create a TextLCD interface using a controller with native SPI3 8 bits interface
+ * This mode is supported by ST7070.
+ *
+ */
+class TextLCD_SPI_N_3_8 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with a native SPI3 8 bits interface
+ * This mode is supported by ST7070. Note that implementation in TexTLCD is not very efficient due to
+ * structure of the TextLCD library: each databyte is written separately and requires a separate 'count command' set to 1 byte.
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = ST7070)
+ */
+ TextLCD_SPI_N_3_8(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7070);
+
+ /** Destruct a TextLCD interface using a controller with native SPI3_8 interface
+ */
+ virtual ~TextLCD_SPI_N_3_8(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal shadow value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+
+#endif /* Native SPI bus */
+//------- End TextLCD_SPI_N_3_8 -----------
+
+
+//------- Start TextLCD_SPI_N_3_9 ---------
+#if(LCD_SPI_N_3_9 == 1) /* Native SPI bus */
+//Code checked out on logic analyser. Not yet tested on hardware..
+
+/** Create a TextLCD interface using a controller with native SPI3 9 bits interface
+ * Note: current mbed libs only support SPI 9 bit mode for NXP platforms
+ *
+ */
+class TextLCD_SPI_N_3_9 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI3 9 bits interface
+ * Note: current mbed libs only support SPI 9 bit mode for NXP platforms
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = AIP31068)
+ */
+ TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = AIP31068);
+
+ /** Destruct a TextLCD interface using a controller with native SPI3_9 interface
+ */
+ virtual ~TextLCD_SPI_N_3_9(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal shadow value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N_3_9 ----------
+
+
+//------- Start TextLCD_SPI_N_3_10 ---------
+#if(LCD_SPI_N_3_10 == 1) /* Native SPI bus */
+
+/** Create a TextLCD interface using a controller with native SPI3 10 bits interface
+ * Note: current mbed libs only support SPI 10 bit mode for NXP platforms
+ *
+ */
+class TextLCD_SPI_N_3_10 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI3 10 bits interface
+ * Note: current mbed libs only support SPI 10 bit mode for NXP platforms
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = AIP31068)
+ */
+ TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = AIP31068);
+
+ /** Destruct a TextLCD interface using a controller with native SPI3_10 interface
+ */
+ virtual ~TextLCD_SPI_N_3_10(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal shadow value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N_3_10 ----------
+
+
+//------- Start TextLCD_SPI_N_3_16 ---------
+#if(LCD_SPI_N_3_16 == 1) /* Native SPI bus */
+
+/** Create a TextLCD interface using a controller with native SPI3 16 bits interface
+ *
+ */
+class TextLCD_SPI_N_3_16 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI3 16 bits interface
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = PT6314)
+ */
+ TextLCD_SPI_N_3_16(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = PT6314);
+
+ /** Destruct a TextLCD interface using a controller with native SPI3_16 interface
+ */
+ virtual ~TextLCD_SPI_N_3_16(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal shadow value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N_3_16 ----------
+
+
+//------- Start TextLCD_SPI_N_3_24 ---------
+#if(LCD_SPI_N_3_24 == 1) /* Native SPI bus */
+
+/** Create a TextLCD interface using a controller with native SPI3 24 bits interface
+ * Note: lib uses SPI 8 bit mode
+ *
+ */
+class TextLCD_SPI_N_3_24 : public TextLCD_Base {
+public:
+ /** Create a TextLCD interface using a controller with native SPI3 24 bits interface
+ * Note: lib uses SPI 8 bit mode
+ *
+ * @param spi SPI Bus
+ * @param cs chip select pin (active low)
+ * @param type Sets the panel size/addressing mode (default = LCD16x2)
+ * @param bl Backlight control line (optional, default = NC)
+ * @param ctrl LCD controller (default = SSD1803)
+ */
+ TextLCD_SPI_N_3_24(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = SSD1803_3V3);
+
+ /** Destruct a TextLCD interface using a controller with native SPI3_24 interface
+ */
+ virtual ~TextLCD_SPI_N_3_24(void);
+
+private:
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the Enable pin.
+ */
+ virtual void _setEnable(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the RS pin (0 = Command, 1 = Data).
+ */
+ virtual void _setRS(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
+ */
+ virtual void _setBL(bool value);
+
+/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
+ * Set the databus value (4 bit).
+ */
+ virtual void _setData(int value);
+
+/** Low level writes to LCD serial bus only (serial native)
+ */
+ virtual void _writeByte(int value);
+
+// SPI bus
+ SPI *_spi;
+ DigitalOut _cs;
+
+// controlbyte to select between data and command. Internal value for serial bus only
+ char _controlbyte;
+
+//Backlight
+ DigitalOut *_bl;
+};
+#endif /* Native SPI bus */
+//-------- End TextLCD_SPI_N_3_24 ----------
+
#endif