Yoshihiro TSUBOI
Stand-alone AVR(328P) writer
Revision 0:2a70d9d5c487, committed 2010-12-09
- Comitter:
- ytsuboi
- Date:
- Thu Dec 09 06:30:51 2010 +0000
- Commit message:
- alpha-version for Make: Tokyo Meeting 06
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD.lib Thu Dec 09 06:30:51 2010 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/simon/code/TextLCD/#a53b3e2d6f1e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu Dec 09 06:30:51 2010 +0000
@@ -0,0 +1,304 @@
+// AVR(328P) stand-alone writer.
+// Written for Make: Tokyo meeting 06
+// by @ytsuboi
+
+#include "mbed.h"
+// TextLCD could be found at http://mbed.org/users/simon/libraries/TextLCD/livod0
+#include "TextLCD.h"
+
+LocalFileSystem local("local");
+TextLCD lcd(p24, p26, p27, p28, p29, p30);
+SPI avrspi(p11, p12, p13); // mosi, miso, sck
+DigitalOut avrrst(p14);
+DigitalIn enable(p10);
+
+int main(void) {
+ char str[100];
+
+ lcd.cls();
+ // Start screen
+ lcd.locate(0, 0);
+ lcd.printf("mbed Stand-Alone");
+ lcd.locate(5, 1);
+ lcd.printf("AVR writer");
+ wait(3);
+
+ lcd.locate(0, 0);
+ lcd.printf("put your AVR and");
+ lcd.locate(0, 1);
+ lcd.printf("push to continue");
+
+ while(1) {
+ if(!enable) {
+ break;
+ }
+ wait(0.25);
+ }
+
+ avrrst = 1;
+ wait_ms(27);
+ avrrst = 0;
+ wait_ms(27);
+
+ // Setup the spi for 8 bit data, high steady state clock,
+ // second edge capture, with a 100KHz clock rate
+
+ avrspi.format(8,0);
+ avrspi.frequency(100000);
+
+ wait_ms(25);
+
+ // enter program mode
+ avrspi.write(0xAC);
+ avrspi.write(0x53);
+ int response = avrspi.write(0x00);
+ avrspi.write(0x00);
+
+ lcd.cls();
+ lcd.locate(0, 0);
+ lcd.printf("Enter Prog mode:");
+ lcd.locate(9, 1);
+ if (response == 0x53) {
+ lcd.printf("Success");
+ } else {
+ lcd.printf("Failed");
+ return -1;
+ }
+
+ wait(2);
+
+// Check Device Sig.
+ //Vendor Code
+ avrspi.write(0x30);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ int sig0 = avrspi.write(0x00);
+ //Product Family Code and Flash Size
+ avrspi.write(0x30);
+ avrspi.write(0x00);
+ avrspi.write(0x01);
+ int sig1 = avrspi.write(0x00);
+ //Part Number
+ avrspi.write(0x30);
+ avrspi.write(0x00);
+ avrspi.write(0x02);
+ int sig2 = avrspi.write(0x00);
+
+ lcd.cls();
+ lcd.locate(0, 0);
+ sprintf(str, "Device: %02X %02X %02X", sig0, sig1, sig2);
+ lcd.printf(str);
+// lcd.printf("Device:");
+ lcd.locate(0, 1);
+ if (sig0==0x1E && sig1==0x95 && sig2==0x0F) {
+ lcd.printf("ATmega 328P");
+ } else if (sig0==0x1E) {
+ lcd.printf("Unsupport Atmel");
+ return -1;
+ } else if (sig0==0x00 || sig1==0x01 || sig2==0x02) {
+ lcd.printf("LOCKED!!");
+ return -1;
+ } else if (sig0==0xFF || sig1==0xFF || sig2||0xFF) {
+ lcd.printf("MISSING!!");
+ return -1;
+ } else {
+ lcd.printf("UNKNOWN!!");
+ return -1;
+ }
+
+ wait(2);
+
+// Erase Flash
+ lcd.cls();
+ lcd.locate(0, 0);
+ lcd.printf("Erasing Flash...");
+ avrspi.write(0xAC);
+ avrspi.write(0x80);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ wait_ms(9);
+ //poll
+ do {
+ avrspi.write(0xF0);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ response = avrspi.write(0x00);
+ } while ((response & 0x01) != 0);
+ //end poll
+ lcd.locate(10, 1);
+ lcd.printf("DONE");
+
+ wait(2);
+
+// Open binary file
+ lcd.cls();
+ lcd.locate(0, 0);
+ lcd.printf("Opening file...");
+ FILE *fp = fopen("/local/AVRCODE.bin", "rb");
+
+ if (fp == NULL) {
+ lcd.locate(0, 1);
+ lcd.printf("Failed to open!!");
+ return -1;
+ } else {
+ lcd.locate(0, 1);
+ lcd.printf("Opened!!");
+ wait(2);
+
+ lcd.cls();
+ lcd.locate(0, 0);
+ lcd.printf("Writing binaries");
+// reset AVR
+// avrrst = 1;
+// wait_ms(27);
+// avrrst = 0;
+// wait_ms(27);
+
+ int pageOffset = 0;
+ int pageNum = 0;
+ int n = 0;
+ int HighLow = 0;
+
+// do programing
+ while ((n = getc(fp)) != EOF) {
+ //write loaded page to flash
+ //Page size of 328P is 64word/page
+ if (pageOffset == 64) {
+ avrspi.write(0x4C);
+ avrspi.write((pageNum >> 2) & 0x3F);
+ avrspi.write((pageNum & 0x03) << 6);
+ avrspi.write(0x00);
+ wait_ms(5);
+ //poll
+ do {
+ avrspi.write(0xF0);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ response = avrspi.write(0x00);
+ } while ((response & 0x01) != 0);
+ //end poll
+ pageNum++;
+ // Total page of 328P is 256page
+ if (pageNum > 256) {
+ break;
+ }
+
+ pageOffset = 0;
+ }
+
+ // load low byte
+ if (HighLow == 0) {
+ avrspi.write(0x40);
+ avrspi.write(0x00);
+ avrspi.write(pageOffset & 0x3F);
+ avrspi.write(n);
+
+ //poll
+ do {
+ avrspi.write(0xF0);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ response = avrspi.write(0x00);
+ } while ((response & 0x01) != 0);
+ //end poll
+
+ HighLow = 1;
+ }
+ // load high byte
+ else {
+ avrspi.write(0x48);
+ avrspi.write(0x00);
+ avrspi.write(pageOffset & 0x3F);
+ avrspi.write(n);
+
+ //poll
+ do {
+ avrspi.write(0xF0);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ response = avrspi.write(0x00);
+ } while ((response & 0x01) != 0);
+ //end poll
+
+ HighLow = 0;
+ pageOffset++;
+ }
+ }
+
+//close binary file
+ fclose(fp);
+
+ lcd.locate(0, 1);
+ lcd.printf("DONE!!");
+ wait(2);
+ }
+
+//write low fuse bit
+ lcd.cls();
+ lcd.locate(0, 0);
+ lcd.printf("Writing Low Fuse");
+ avrspi.write(0xAC);
+ avrspi.write(0xA0);
+ avrspi.write(0x00);
+ avrspi.write(0xE2);
+ wait_ms(5);
+ //poll
+ do {
+ avrspi.write(0xF0);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ response = avrspi.write(0x00);
+ } while ((response & 0x01) != 0);
+ //end poll
+ lcd.locate(10, 1);
+ lcd.printf("DONE");
+ wait(1);
+
+//write high fuse bit
+ lcd.cls();
+ lcd.locate(0, 0);
+ lcd.printf("Writing Hi Fuse");
+ avrspi.write(0xAC);
+ avrspi.write(0xA8);
+ avrspi.write(0x00);
+ avrspi.write(0xDA);
+ wait_ms(5);
+ //poll
+ do {
+ avrspi.write(0xF0);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ response = avrspi.write(0x00);
+ } while ((response & 0x01) != 0);
+ //end poll
+ lcd.locate(10, 1);
+ lcd.printf("DONE");
+ wait(1);
+
+//write ext fuse bit
+ lcd.cls();
+ lcd.locate(0, 0);
+ lcd.printf("Writing Ext Fuse");
+ avrspi.write(0xAC);
+ avrspi.write(0xA4);
+ avrspi.write(0x00);
+ avrspi.write(0x05);
+ wait_ms(5);
+ //poll
+ do {
+ avrspi.write(0xF0);
+ avrspi.write(0x00);
+ avrspi.write(0x00);
+ response = avrspi.write(0x00);
+ } while ((response & 0x01) != 0);
+ //end poll
+ lcd.locate(10, 1);
+ lcd.printf("DONE");
+ wait(1);
+
+// exit program mode
+ avrrst = 1;
+// end
+ return 0;
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu Dec 09 06:30:51 2010 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/e2ac27c8e93e