Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Revision 86:04dd9b1680ae, committed 2014-07-02
- Comitter:
- bogdanm
- Date:
- Wed Jul 02 13:22:23 2014 +0100
- Parent:
- 85:024bf7f99721
- Child:
- 87:6213f644d804
- Commit message:
- Release 86 of the mbed library
Main changes:
- bug fixes in various backends
- mbed "error" replaced by assert logic (mbed_assert)
- new ST Nucleo targets
Changed in this revision
--- a/TARGET_ARCH_PRO/TARGET_NXP/TARGET_LPC176X/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_ARCH_PRO/TARGET_NXP/TARGET_LPC176X/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CS/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CS/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/system_LPC17xx.o has changed
--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,7 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
#include "fsl_gpio_hal.h"
#ifdef __cplusplus
@@ -27,6 +28,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pinName != (PinName)NC);
uint32_t port = obj->pinName >> GPIO_PORT_SHIFT;
uint32_t pin = obj->pinName & 0xFF;
@@ -34,6 +36,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pinName != (PinName)NC);
uint32_t port = obj->pinName >> GPIO_PORT_SHIFT;
uint32_t pin = obj->pinName & 0xFF;
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/system_MK64F12.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/retarget.o has changed
--- a/TARGET_KL05Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_KL05Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/system_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/system_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/retarget.o has changed
--- a/TARGET_KL25Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_KL25Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/system_MKL25Z4.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/retarget.o has changed
--- a/TARGET_KL46Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_KL46Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/system_MKL46Z4.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/retarget.o has changed
--- a/TARGET_LPC1114/TARGET_NXP/TARGET_LPC11XX_11CXX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC1114/TARGET_NXP/TARGET_LPC11XX_11CXX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -28,6 +30,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
uint32_t pin_number = ((obj->pin & 0x0F00) >> 8);
if (value)
*obj->reg_write |= (1 << pin_number);
@@ -36,6 +39,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_mask_read) ? 1 : 0);
}
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/system_LPC11xx.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/retarget.o has changed
--- a/TARGET_LPC11U24/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC11U24/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/retarget.o has changed
--- a/TARGET_LPC11U35_401/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC11U35_401/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/retarget.o has changed
--- a/TARGET_LPC11U35_501/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC11U35_501/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/retarget.o has changed
--- a/TARGET_LPC11U68/TARGET_NXP/TARGET_LPC11U6X/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC11U68/TARGET_NXP/TARGET_LPC11U6X/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/system_LPC11U6x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/LPC11U68.ld Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,235 @@
+/*Based on following file*/
+/*
+ * GENERATED FILE - DO NOT EDIT
+ * (c) Code Red Technologies Ltd, 2008-13
+ * (c) NXP Semiconductors 2013-2014
+ * Generated linker script file for LPC11U68
+ * Created from LibIncTemplate.ld (LPCXpresso v7.2 (0 [Build 153] [2014-05-19] ))
+ * By LPCXpresso v7.2.0 [Build 153] [2014-05-19] on Sat Jun 14 15:26:54 JST 2014
+ */
+
+MEMORY
+{
+ /* Define each memory region */
+ MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes */
+ Ram0_32 (rwx) : ORIGIN = 0x10000000+0x100, LENGTH = 0x8000-0x100 /* 32K bytes */
+ Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes */
+ Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes */
+
+
+}
+ /* Define a symbol for the top of each memory region */
+ __top_MFlash256 = 0x0 + 0x40000;
+ __top_Ram0_32 = 0x10000000 + 0x8000;
+ __top_Ram1_2 = 0x20000000 + 0x800;
+ __top_Ram2USB_2 = 0x20004000 + 0x800;
+
+ENTRY(ResetISR)
+
+SECTIONS
+{
+
+ /* MAIN TEXT SECTION */
+ .text : ALIGN(4)
+ {
+ FILL(0xff)
+ __vectors_start__ = ABSOLUTE(.) ;
+ KEEP(*(.isr_vector))
+
+ /* Global Section Table */
+ . = ALIGN(4) ;
+ __section_table_start = .;
+ __data_section_table = .;
+ LONG(LOADADDR(.data));
+ LONG( ADDR(.data));
+ LONG( SIZEOF(.data));
+ LONG(LOADADDR(.data_RAM2));
+ LONG( ADDR(.data_RAM2));
+ LONG( SIZEOF(.data_RAM2));
+ LONG(LOADADDR(.data_RAM3));
+ LONG( ADDR(.data_RAM3));
+ LONG( SIZEOF(.data_RAM3));
+ __data_section_table_end = .;
+ __bss_section_table = .;
+ LONG( ADDR(.bss));
+ LONG( SIZEOF(.bss));
+ LONG( ADDR(.bss_RAM2));
+ LONG( SIZEOF(.bss_RAM2));
+ LONG( ADDR(.bss_RAM3));
+ LONG( SIZEOF(.bss_RAM3));
+ __bss_section_table_end = .;
+ __section_table_end = . ;
+ /* End of Global Section Table */
+
+
+ *(.after_vectors*)
+
+ *(.text*)
+ *(.rodata .rodata.*)
+ . = ALIGN(4);
+
+ /* C++ constructors etc */
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ KEEP(*(.fini));
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+ } > MFlash256
+
+ /*
+ * for exception handling/unwind - some Newlib functions (in common
+ * with C++ and STDC++) use this.
+ */
+ .ARM.extab : ALIGN(4)
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > MFlash256
+ __exidx_start = .;
+
+ .ARM.exidx : ALIGN(4)
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > MFlash256
+ __exidx_end = .;
+
+ _etext = .;
+
+ /* possible MTB section for Ram1_2 */
+ .mtb_buffer_RAM2 (NOLOAD) :
+ {
+ KEEP(*(.mtb.$RAM2*))
+ KEEP(*(.mtb.$RAM1_2*))
+ } > Ram1_2
+
+ /* DATA section for Ram1_2 */
+ .data_RAM2 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.ramfunc.$RAM2)
+ *(.ramfunc.$Ram1_2)
+ *(.data.$RAM2*)
+ *(.data.$Ram1_2*)
+ . = ALIGN(4) ;
+ } > Ram1_2 AT>MFlash256
+ /* possible MTB section for Ram2USB_2 */
+ .mtb_buffer_RAM3 (NOLOAD) :
+ {
+ KEEP(*(.mtb.$RAM3*))
+ KEEP(*(.mtb.$RAM2USB_2*))
+ } > Ram2USB_2
+
+ /* DATA section for Ram2USB_2 */
+ .data_RAM3 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.ramfunc.$RAM3)
+ *(.ramfunc.$Ram2USB_2)
+ *(.data.$RAM3*)
+ *(.data.$Ram2USB_2*)
+ . = ALIGN(4) ;
+ } > Ram2USB_2 AT>MFlash256
+
+ /* MAIN DATA SECTION */
+
+ /* Default MTB section */
+ .mtb_buffer_default (NOLOAD) :
+ {
+ KEEP(*(.mtb*))
+ } > Ram0_32
+
+ .uninit_RESERVED : ALIGN(4)
+ {
+ KEEP(*(.bss.$RESERVED*))
+ . = ALIGN(4) ;
+ _end_uninit_RESERVED = .;
+ } > Ram0_32
+
+
+ /* Main DATA section (Ram0_32) */
+ .data : ALIGN(4)
+ {
+ FILL(0xff)
+ _data = . ;
+ *(vtable)
+ *(.ramfunc*)
+ *(.data*)
+ . = ALIGN(4) ;
+ _edata = . ;
+ } > Ram0_32 AT>MFlash256
+
+ /* BSS section for Ram1_2 */
+ .bss_RAM2 : ALIGN(4)
+ {
+ *(.bss.$RAM2*)
+ *(.bss.$Ram1_2*)
+ . = ALIGN(4) ;
+ } > Ram1_2
+ /* BSS section for Ram2USB_2 */
+ .bss_RAM3 : ALIGN(4)
+ {
+ *(.bss.$RAM3*)
+ *(.bss.$Ram2USB_2*)
+ . = ALIGN(4) ;
+ } > Ram2USB_2
+
+ /* MAIN BSS SECTION */
+ .bss : ALIGN(4)
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4) ;
+ _ebss = .;
+ PROVIDE(end = .);
+ __end__ = .;
+ } > Ram0_32
+
+ /* NOINIT section for Ram1_2 */
+ .noinit_RAM2 (NOLOAD) : ALIGN(4)
+ {
+ *(.noinit.$RAM2*)
+ *(.noinit.$Ram1_2*)
+ . = ALIGN(4) ;
+ } > Ram1_2
+ /* NOINIT section for Ram2USB_2 */
+ .noinit_RAM3 (NOLOAD) : ALIGN(4)
+ {
+ *(.noinit.$RAM3*)
+ *(.noinit.$Ram2USB_2*)
+ . = ALIGN(4) ;
+ } > Ram2USB_2
+
+ /* DEFAULT NOINIT SECTION */
+ .noinit (NOLOAD): ALIGN(4)
+ {
+ _noinit = .;
+ *(.noinit*)
+ . = ALIGN(4) ;
+ _end_noinit = .;
+ } > Ram0_32
+
+ PROVIDE(_pvHeapStart = .);
+ PROVIDE(_vStackTop = __top_Ram0_32 - 0);
+}
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/startup_LPC11U68.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/system_LPC11U6x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U68/TOOLCHAIN_GCC_CR/LPC11U68.ld Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,237 @@
+/*Based on following file*/
+/*
+ * GENERATED FILE - DO NOT EDIT
+ * (c) Code Red Technologies Ltd, 2008-13
+ * (c) NXP Semiconductors 2013-2014
+ * Generated linker script file for LPC11U68
+ * Created from LibIncTemplate.ld (LPCXpresso v7.2 (0 [Build 153] [2014-05-19] ))
+ * By LPCXpresso v7.2.0 [Build 153] [2014-05-19] on Sat Jun 14 15:26:54 JST 2014
+ */
+GROUP(libgcc.a libc.a libstdc++.a libm.a libcr_newlib_nohost.a crti.o crtn.o crtbegin.o crtend.o)
+
+MEMORY
+{
+ /* Define each memory region */
+ MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes */
+ Ram0_32 (rwx) : ORIGIN = 0x10000000+0x100, LENGTH = 0x8000-0x100 /* 32K bytes */
+ Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes */
+ Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes */
+
+
+}
+ /* Define a symbol for the top of each memory region */
+ __top_MFlash256 = 0x0 + 0x40000;
+ __top_Ram0_32 = 0x10000000+0x100 + 0x8000-0x100;
+ __top_Ram1_2 = 0x20000000 + 0x800;
+ __top_Ram2USB_2 = 0x20004000 + 0x800;
+
+ENTRY(ResetISR)
+
+SECTIONS
+{
+
+ /* MAIN TEXT SECTION */
+ .text : ALIGN(4)
+ {
+ FILL(0xff)
+ KEEP(*(.isr_vector))
+ *(.text.ResetISR)
+ *(.text.SystemInit)
+
+ /* Global Section Table */
+ . = ALIGN(4) ;
+ __section_table_start = .;
+ __data_section_table = .;
+ LONG(LOADADDR(.data));
+ LONG( ADDR(.data));
+ LONG( SIZEOF(.data));
+ LONG(LOADADDR(.data_RAM2));
+ LONG( ADDR(.data_RAM2));
+ LONG( SIZEOF(.data_RAM2));
+ LONG(LOADADDR(.data_RAM3));
+ LONG( ADDR(.data_RAM3));
+ LONG( SIZEOF(.data_RAM3));
+ __data_section_table_end = .;
+ __bss_section_table = .;
+ LONG( ADDR(.bss));
+ LONG( SIZEOF(.bss));
+ LONG( ADDR(.bss_RAM2));
+ LONG( SIZEOF(.bss_RAM2));
+ LONG( ADDR(.bss_RAM3));
+ LONG( SIZEOF(.bss_RAM3));
+ __bss_section_table_end = .;
+ __section_table_end = . ;
+ /* End of Global Section Table */
+
+
+ *(.after_vectors*)
+
+ *(.text*)
+ *(.rodata .rodata.*)
+ . = ALIGN(4);
+
+ /* C++ constructors etc */
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ KEEP(*(.fini));
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+ } > MFlash256
+
+ /*
+ * for exception handling/unwind - some Newlib functions (in common
+ * with C++ and STDC++) use this.
+ */
+ .ARM.extab : ALIGN(4)
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > MFlash256
+ __exidx_start = .;
+
+ .ARM.exidx : ALIGN(4)
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > MFlash256
+ __exidx_end = .;
+
+ _etext = .;
+
+ /* possible MTB section for Ram1_2 */
+ .mtb_buffer_RAM2 (NOLOAD) :
+ {
+ KEEP(*(.mtb.$RAM2*))
+ KEEP(*(.mtb.$RAM1_2*))
+ } > Ram1_2
+
+ /* DATA section for Ram1_2 */
+ .data_RAM2 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.ramfunc.$RAM2)
+ *(.ramfunc.$Ram1_2)
+ *(.data.$RAM2*)
+ *(.data.$Ram1_2*)
+ . = ALIGN(4) ;
+ } > Ram1_2 AT>MFlash256
+ /* possible MTB section for Ram2USB_2 */
+ .mtb_buffer_RAM3 (NOLOAD) :
+ {
+ KEEP(*(.mtb.$RAM3*))
+ KEEP(*(.mtb.$RAM2USB_2*))
+ } > Ram2USB_2
+
+ /* DATA section for Ram2USB_2 */
+ .data_RAM3 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.ramfunc.$RAM3)
+ *(.ramfunc.$Ram2USB_2)
+ *(.data.$RAM3*)
+ *(.data.$Ram2USB_2*)
+ . = ALIGN(4) ;
+ } > Ram2USB_2 AT>MFlash256
+
+ /* MAIN DATA SECTION */
+
+ /* Default MTB section */
+ .mtb_buffer_default (NOLOAD) :
+ {
+ KEEP(*(.mtb*))
+ } > Ram0_32
+
+ .uninit_RESERVED : ALIGN(4)
+ {
+ KEEP(*(.bss.$RESERVED*))
+ . = ALIGN(4) ;
+ _end_uninit_RESERVED = .;
+ } > Ram0_32
+
+
+ /* Main DATA section (Ram0_32) */
+ .data : ALIGN(4)
+ {
+ FILL(0xff)
+ _data = . ;
+ *(vtable)
+ *(.ramfunc*)
+ *(.data*)
+ . = ALIGN(4) ;
+ _edata = . ;
+ } > Ram0_32 AT>MFlash256
+
+ /* BSS section for Ram1_2 */
+ .bss_RAM2 : ALIGN(4)
+ {
+ *(.bss.$RAM2*)
+ *(.bss.$Ram1_2*)
+ . = ALIGN(4) ;
+ } > Ram1_2
+ /* BSS section for Ram2USB_2 */
+ .bss_RAM3 : ALIGN(4)
+ {
+ *(.bss.$RAM3*)
+ *(.bss.$Ram2USB_2*)
+ . = ALIGN(4) ;
+ } > Ram2USB_2
+
+ /* MAIN BSS SECTION */
+ .bss : ALIGN(4)
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4) ;
+ _ebss = .;
+ PROVIDE(end = .);
+ __end__ = .;
+ } > Ram0_32
+
+ /* NOINIT section for Ram1_2 */
+ .noinit_RAM2 (NOLOAD) : ALIGN(4)
+ {
+ *(.noinit.$RAM2*)
+ *(.noinit.$Ram1_2*)
+ . = ALIGN(4) ;
+ } > Ram1_2
+ /* NOINIT section for Ram2USB_2 */
+ .noinit_RAM3 (NOLOAD) : ALIGN(4)
+ {
+ *(.noinit.$RAM3*)
+ *(.noinit.$Ram2USB_2*)
+ . = ALIGN(4) ;
+ } > Ram2USB_2
+
+ /* DEFAULT NOINIT SECTION */
+ .noinit (NOLOAD): ALIGN(4)
+ {
+ _noinit = .;
+ *(.noinit*)
+ . = ALIGN(4) ;
+ _end_noinit = .;
+ } > Ram0_32
+
+ PROVIDE(_pvHeapStart = .);
+ PROVIDE(_vStackTop = __top_Ram0_32 - 0);
+}
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/aeabi_romdiv_patch.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/mtb.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/startup_LPC11U68.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/system_LPC11U6x.o has changed
--- a/TARGET_LPC1347/TARGET_NXP/TARGET_LPC13XX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC1347/TARGET_NXP/TARGET_LPC13XX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/system_LPC13Uxx.o has changed
--- a/TARGET_LPC1549/LPC15xx.h Wed Jun 11 15:14:05 2014 +0100 +++ b/TARGET_LPC1549/LPC15xx.h Wed Jul 02 13:22:23 2014 +0100 @@ -1502,7 +1502,11 @@ __IO uint32_t CANIF2_ARB1; /*!< Message interface 1 arbitration 1 */ __IO uint32_t CANIF2_ARB2; /*!< Message interface 1 arbitration 2 */ __IO uint32_t CANIF2_MCTRL; /*!< Message interface 1 message control */ - __I uint32_t RESERVED2[25]; + __IO uint32_t CANIF2_DA1; /*!< Message interface 2 data A1 */ + __IO uint32_t CANIF2_DA2; /*!< Message interface 2 data A2 */ + __IO uint32_t CANIF2_DB1; /*!< Message interface 2 data B1 */ + __IO uint32_t CANIF2_DB2; /*!< Message interface 2 data B2 */ + __I uint32_t RESERVED2[21]; __I uint32_t CANTXREQ1; /*!< Transmission request 1 */ __I uint32_t CANTXREQ2; /*!< Transmission request 2 */ __I uint32_t RESERVED3[6];
--- a/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/device.h Wed Jun 11 15:14:05 2014 +0100 +++ b/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/device.h Wed Jul 02 13:22:23 2014 +0100 @@ -34,7 +34,7 @@ #define DEVICE_SPI 1 #define DEVICE_SPISLAVE 1 -#define DEVICE_CAN 0 +#define DEVICE_CAN 1 #define DEVICE_RTC 0
--- a/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,8 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +42,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
--- a/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/objects.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/objects.h Wed Jul 02 13:22:23 2014 +0100
@@ -56,6 +56,10 @@
unsigned char spi_n;
};
+struct can_s {
+ int index;
+};
+
#include "gpio_object.h"
#ifdef __cplusplus
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/system_LPC15xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1549/TOOLCHAIN_GCC_CR/LPC1549.ld Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,214 @@
+/*Based on following file*/
+/*
+ * GENERATED FILE - DO NOT EDIT
+ * (c) Code Red Technologies Ltd, 2008-13
+ * (c) NXP Semiconductors 2013-2014
+ * Generated linker script file for LPC1549
+ * Created from generic_c.ld (LPCXpresso v7.2 (0 [Build 153] [2014-05-19] ))
+ * By LPCXpresso v7.2.0 [Build 153] [2014-05-19] on Tue Jun 10 00:20:53 JST 2014
+ */
+
+GROUP(libgcc.a libc.a libstdc++.a libm.a libcr_newlib_nohost.a crti.o crtn.o crtbegin.o crtend.o)
+
+MEMORY
+{
+ /* Define each memory region */
+ MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes */
+ Ram0_16 (rwx) : ORIGIN = 0x2000000+0x100, LENGTH = 0x4000-0x100 /* 16K bytes */
+ Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes */
+ Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes */
+
+}
+ /* Define a symbol for the top of each memory region */
+ __top_MFlash256 = 0x0 + 0x40000;
+ __top_Ram0_16 = 0x2000000 + 0x4000;
+ __top_Ram1_16 = 0x2004000 + 0x4000;
+ __top_Ram2_4 = 0x2008000 + 0x1000;
+
+ENTRY(ResetISR)
+
+SECTIONS
+{
+
+ /* MAIN TEXT SECTION */
+ .text : ALIGN(4)
+ {
+ FILL(0xff)
+ KEEP(*(.isr_vector))
+
+ /* Global Section Table */
+ . = ALIGN(4) ;
+ __section_table_start = .;
+ __data_section_table = .;
+ LONG(LOADADDR(.data));
+ LONG( ADDR(.data));
+ LONG( SIZEOF(.data));
+ LONG(LOADADDR(.data_RAM2));
+ LONG( ADDR(.data_RAM2));
+ LONG( SIZEOF(.data_RAM2));
+ LONG(LOADADDR(.data_RAM3));
+ LONG( ADDR(.data_RAM3));
+ LONG( SIZEOF(.data_RAM3));
+ __data_section_table_end = .;
+ __bss_section_table = .;
+ LONG( ADDR(.bss));
+ LONG( SIZEOF(.bss));
+ LONG( ADDR(.bss_RAM2));
+ LONG( SIZEOF(.bss_RAM2));
+ LONG( ADDR(.bss_RAM3));
+ LONG( SIZEOF(.bss_RAM3));
+ __bss_section_table_end = .;
+ __section_table_end = . ;
+ /* End of Global Section Table */
+
+
+ *(.after_vectors*)
+
+ *(.text*)
+ *(.rodata .rodata.*)
+ . = ALIGN(4);
+
+ /* C++ constructors etc */
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ KEEP(*(.fini));
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+ } > MFlash256
+
+ /*
+ * for exception handling/unwind - some Newlib functions (in common
+ * with C++ and STDC++) use this.
+ */
+ .ARM.extab : ALIGN(4)
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > MFlash256
+ __exidx_start = .;
+
+ .ARM.exidx : ALIGN(4)
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > MFlash256
+ __exidx_end = .;
+
+ _etext = .;
+
+ /* DATA section for Ram1_16 */
+ .data_RAM2 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.ramfunc.$RAM2)
+ *(.ramfunc.$Ram1_16)
+ *(.data.$RAM2*)
+ *(.data.$Ram1_16*)
+ . = ALIGN(4) ;
+ } > Ram1_16 AT>MFlash256
+
+ /* DATA section for Ram2_4 */
+ .data_RAM3 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.ramfunc.$RAM3)
+ *(.ramfunc.$Ram2_4)
+ *(.data.$RAM3*)
+ *(.data.$Ram2_4*)
+ . = ALIGN(4) ;
+ } > Ram2_4 AT>MFlash256
+
+ /* MAIN DATA SECTION */
+ .uninit_RESERVED : ALIGN(4)
+ {
+ KEEP(*(.bss.$RESERVED*))
+ . = ALIGN(4) ;
+ _end_uninit_RESERVED = .;
+ } > Ram0_16
+
+ /* Main DATA section (Ram0_16) */
+ .data : ALIGN(4)
+ {
+ FILL(0xff)
+ _data = . ;
+ *(vtable)
+ *(.ramfunc*)
+ *(.data*)
+ . = ALIGN(4) ;
+ _edata = . ;
+ } > Ram0_16 AT>MFlash256
+
+ /* BSS section for Ram1_16 */
+ .bss_RAM2 : ALIGN(4)
+ {
+ *(.bss.$RAM2*)
+ *(.bss.$Ram1_16*)
+ . = ALIGN(4) ;
+ } > Ram1_16
+ /* BSS section for Ram2_4 */
+ .bss_RAM3 : ALIGN(4)
+ {
+ *(.bss.$RAM3*)
+ *(.bss.$Ram2_4*)
+ . = ALIGN(4) ;
+ } > Ram2_4
+
+ /* MAIN BSS SECTION */
+ .bss : ALIGN(4)
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4) ;
+ _ebss = .;
+ PROVIDE(end = .);
+ __end__ = .;
+ } > Ram0_16
+
+ /* NOINIT section for Ram1_16 */
+ .noinit_RAM2 (NOLOAD) : ALIGN(4)
+ {
+ *(.noinit.$RAM2*)
+ *(.noinit.$Ram1_16*)
+ . = ALIGN(4) ;
+ } > Ram1_16
+ /* NOINIT section for Ram2_4 */
+ .noinit_RAM3 (NOLOAD) : ALIGN(4)
+ {
+ *(.noinit.$RAM3*)
+ *(.noinit.$Ram2_4*)
+ . = ALIGN(4) ;
+ } > Ram2_4
+
+ /* DEFAULT NOINIT SECTION */
+ .noinit (NOLOAD): ALIGN(4)
+ {
+ _noinit = .;
+ *(.noinit*)
+ . = ALIGN(4) ;
+ _end_noinit = .;
+ } > Ram0_16
+
+ PROVIDE(_pvHeapStart = .);
+ PROVIDE(_vStackTop = __top_Ram0_16 - 0);
+}
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/startup_LPC15xx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/system_LPC15xx.o has changed
--- a/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CS/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CS/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/system_LPC17xx.o has changed
--- a/TARGET_LPC2368/TARGET_NXP/TARGET_LPC23XX/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC2368/TARGET_NXP/TARGET_LPC23XX/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/core_arm7.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/system_LPC23xx.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/vector_realmonitor.o has changed
--- a/TARGET_LPC4088/TARGET_NXP/TARGET_LPC408X/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC4088/TARGET_NXP/TARGET_LPC408X/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/sys_helper.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/system_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/retarget.o has changed
--- a/TARGET_LPC812/TARGET_NXP/TARGET_LPC81X/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_LPC812/TARGET_NXP/TARGET_LPC81X/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/system_LPC8xx.o has changed
--- a/TARGET_NRF51822/TARGET_NORDIC/TARGET_NRF51822/PinNames.h Wed Jun 11 15:14:05 2014 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,153 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2013 Nordic Semiconductor
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 3
-
-typedef enum {
- p0 = 0,
- p1 = 1,
- p2 = 2,
- p3 = 3,
- p4 = 4,
- p5 = 5,
- p6 = 6,
- p7 = 7,
- p8 = 8,
- p9 = 9,
- p10 = 10,
- p11 = 11,
- p12 = 12,
- p13 = 13,
- p14 = 14,
- p15 = 15,
- p16 = 16,
- p17 = 17,
- p18 = 18,
- p19 = 19,
- p20 = 20,
- p21 = 21,
- p22 = 22,
- p23 = 23,
- p24 = 24,
- p25 = 25,
- p26 = 26,
- p27 = 27,
- p28 = 28,
- p29 = 29,
- p30 = 30,
-// p31=31,
-
- P0_0 = p0,
- P0_1 = p1,
- P0_2 = p2,
- P0_3 = p3,
- P0_4 = p4,
- P0_5 = p5,
- P0_6 = p6,
- P0_7 = p7,
-
- P0_8 = p8,
- P0_9 = p9,
- P0_10 = p10,
- P0_11 = p11,
- P0_12 = p12,
- P0_13 = p13,
- P0_14 = p14,
- P0_15 = p15,
-
- P0_16 = p16,
- P0_17 = p17,
- P0_18 = p18,
- P0_19 = p19,
- P0_20 = p20,
- P0_21 = p21,
- P0_22 = p22,
- P0_23 = p23,
-
- P0_24 = p24,
- P0_25 = p25,
- P0_26 = p26,
- P0_27 = p27,
- P0_28 = p28,
- P0_29 = p29,
- P0_30 = p30,
-
- LED1 = p18,
- LED2 = p19,
- LED3 = p18,
- LED4 = p19,
-
- BUTTON1 = p16,
- BUTTON2 = p17,
-
- RX_PIN_NUMBER = p11,
- TX_PIN_NUMBER = p9,
- CTS_PIN_NUMBER = p10,
- RTS_PIN_NUMBER = p8,
-
- // mBed interface Pins
- USBTX = TX_PIN_NUMBER,
- USBRX = RX_PIN_NUMBER,
-
- SPI_PSELMOSI0 = p20,
- SPI_PSELMISO0 = p22,
- SPI_PSELSS0 = p24,
- SPI_PSELSCK0 = p25,
-
- SPI_PSELMOSI1 = p12,
- SPI_PSELMISO1 = p13,
- SPI_PSELSS1 = p14,
- SPI_PSELSCK1 = p15,
-
- SPIS_PSELMOSI = p12,
- SPIS_PSELMISO = p13,
- SPIS_PSELSS = p14,
- SPIS_PSELSCK = p15,
-
- I2C_SDA0 = p22,
- I2C_SCL0 = p20,
-
- I2C_SDA1 = p13,
- I2C_SCL1 = p15,
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullDown = 1,
- PullUp = 3,
- PullDefault = PullUp
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NRF51822/TARGET_NORDIC/TARGET_NRF51822/TARGET_NRF51822_MKIT/PinNames.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,153 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 3
+
+typedef enum {
+ p0 = 0,
+ p1 = 1,
+ p2 = 2,
+ p3 = 3,
+ p4 = 4,
+ p5 = 5,
+ p6 = 6,
+ p7 = 7,
+ p8 = 8,
+ p9 = 9,
+ p10 = 10,
+ p11 = 11,
+ p12 = 12,
+ p13 = 13,
+ p14 = 14,
+ p15 = 15,
+ p16 = 16,
+ p17 = 17,
+ p18 = 18,
+ p19 = 19,
+ p20 = 20,
+ p21 = 21,
+ p22 = 22,
+ p23 = 23,
+ p24 = 24,
+ p25 = 25,
+ p26 = 26,
+ p27 = 27,
+ p28 = 28,
+ p29 = 29,
+ p30 = 30,
+// p31=31,
+
+ P0_0 = p0,
+ P0_1 = p1,
+ P0_2 = p2,
+ P0_3 = p3,
+ P0_4 = p4,
+ P0_5 = p5,
+ P0_6 = p6,
+ P0_7 = p7,
+
+ P0_8 = p8,
+ P0_9 = p9,
+ P0_10 = p10,
+ P0_11 = p11,
+ P0_12 = p12,
+ P0_13 = p13,
+ P0_14 = p14,
+ P0_15 = p15,
+
+ P0_16 = p16,
+ P0_17 = p17,
+ P0_18 = p18,
+ P0_19 = p19,
+ P0_20 = p20,
+ P0_21 = p21,
+ P0_22 = p22,
+ P0_23 = p23,
+
+ P0_24 = p24,
+ P0_25 = p25,
+ P0_26 = p26,
+ P0_27 = p27,
+ P0_28 = p28,
+ P0_29 = p29,
+ P0_30 = p30,
+
+ LED1 = p18,
+ LED2 = p19,
+ LED3 = p18,
+ LED4 = p19,
+
+ BUTTON1 = p16,
+ BUTTON2 = p17,
+
+ RX_PIN_NUMBER = p11,
+ TX_PIN_NUMBER = p9,
+ CTS_PIN_NUMBER = p10,
+ RTS_PIN_NUMBER = p8,
+
+ // mBed interface Pins
+ USBTX = TX_PIN_NUMBER,
+ USBRX = RX_PIN_NUMBER,
+
+ SPI_PSELMOSI0 = p20,
+ SPI_PSELMISO0 = p22,
+ SPI_PSELSS0 = p24,
+ SPI_PSELSCK0 = p25,
+
+ SPI_PSELMOSI1 = p12,
+ SPI_PSELMISO1 = p13,
+ SPI_PSELSS1 = p14,
+ SPI_PSELSCK1 = p15,
+
+ SPIS_PSELMOSI = p12,
+ SPIS_PSELMISO = p13,
+ SPIS_PSELSS = p14,
+ SPIS_PSELSCK = p15,
+
+ I2C_SDA0 = p22,
+ I2C_SCL0 = p20,
+
+ I2C_SDA1 = p13,
+ I2C_SCL1 = p15,
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 1,
+ PullUp = 3,
+ PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NRF51822/TARGET_NORDIC/TARGET_NRF51822/TARGET_NRF51822_MKIT/device.h Wed Jul 02 13:22:23 2014 +0100 @@ -0,0 +1,57 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 0 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- a/TARGET_NRF51822/TARGET_NORDIC/TARGET_NRF51822/device.h Wed Jun 11 15:14:05 2014 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,57 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 0 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_CAN 0 - -#define DEVICE_RTC 0 - -#define DEVICE_ETHERNET 0 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 - -#define DEVICE_SLEEP 1 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 0 - -#define DEVICE_ERROR_PATTERN 1 - -#include "objects.h" - -#endif
--- a/TARGET_NRF51822/TARGET_NORDIC/TARGET_NRF51822/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_NRF51822/TARGET_NORDIC/TARGET_NRF51822/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
--- a/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -30,6 +30,7 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
@@ -48,6 +49,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value) {
*obj->reg_set = obj->mask;
} else {
@@ -56,6 +58,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_crs.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_exti.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_misc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_syscfg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_crs.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_exti.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_misc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_syscfg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
--- a/TARGET_NUCLEO_F072RB/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_NUCLEO_F072RB/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -30,6 +30,7 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
@@ -48,6 +49,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value) {
*obj->reg_set = obj->mask;
} else {
@@ -56,6 +58,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
--- a/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -30,6 +30,7 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
@@ -48,6 +49,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value) {
*obj->reg_set = obj->mask;
} else {
@@ -56,6 +58,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/misc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_bkp.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_exti.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_sdio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/system_stm32f10x.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/misc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_bkp.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_exti.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_sdio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/system_stm32f10x.o has changed
--- a/TARGET_NUCLEO_F302R8/TARGET_STM/TARGET_NUCLEO_F302R8/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_NUCLEO_F302R8/TARGET_STM/TARGET_NUCLEO_F302R8/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -30,6 +30,7 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
@@ -48,6 +49,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value) {
*obj->reg_set = obj->mask;
} else {
@@ -56,6 +58,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_exti.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_misc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_syscfg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f30x_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/system_stm32f30x.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_exti.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_misc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_syscfg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f30x_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/system_stm32f30x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/PeripheralNames.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE,
+ ADC_2 = (int)ADC2_BASE,
+} ADCName;
+
+typedef enum {
+ DAC_1 = (int)DAC1_BASE,
+ DAC_2 = (int)DAC2_BASE
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_15 = (int)TIM15_BASE,
+ PWM_16 = (int)TIM16_BASE,
+ PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/PinNames.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,182 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_4,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/PortNames.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortF = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/device.h Wed Jul 02 13:22:23 2014 +0100 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,71 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/objects.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/startup_stm32f334x8.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f334r8.sct Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F334R8: 64KB FLASH (0x10000) + 12KB SRAM (0x3000)
+LR_IROM1 0x08000000 0x10000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x10000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x188) (0x3000-0x188) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/startup_stm32f334x8.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f334r8.sct Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F334R8: 64KB FLASH (0x10000) + 12KB SRAM (0x3000)
+LR_IROM1 0x08000000 0x10000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x10000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x188) (0x3000-0x188) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/system_stm32f3xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F334R8/cmsis.h Wed Jul 02 13:22:23 2014 +0100 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f3xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/cmsis_nvic.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F334R8
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 82 vectors = 328 bytes from 0x40 to 0x187
+// Total: 98 vectors = 392 bytes (0x188) to be reserved in RAM
+#define NVIC_NUM_VECTORS 98
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/core_cm0.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/core_cm0plus.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/core_cm3.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/core_cm4.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/core_cm4_simd.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/core_cmFunc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/core_cmInstr.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f334x8.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,7604 @@
+/**
+ ******************************************************************************
+ * @file stm32f334x8.h
+ * @author MCD Application Team
+ * @version V2.0.1
+ * @date 18-June-2014
+ * @brief CMSIS STM32F334x4/STM32F334x6/STM32F334x8 Devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f334x8
+ * @{
+ */
+
+#ifndef __STM32F334x8_H
+#define __STM32F334x8_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 0 /*!< STM32F334x4/STM32F334x6/STM32F334x8 devices do not provide an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F334x4/STM32F334x6/STM32F334x8 devices use 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< STM32F334x4/STM32F334x6/STM32F334x8 devices provide an FPU */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F334x4/STM32F334x6/STM32F334x8 device Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line 19 */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line 20 */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_TSC_IRQn = 8, /*!< EXTI Line2 Interrupt and Touch Sense Controller Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */
+ ADC1_2_IRQn = 18, /*!< ADC1 & ADC2 Interrupts */
+ CAN_TX_IRQn = 19, /*!< CAN TX Interrupts */
+ CAN_RX0_IRQn = 20, /*!< CAN RX0 Interrupts */
+ CAN_RX1_IRQn = 21, /*!< CAN RX1 Interrupt */
+ CAN_SCE_IRQn = 22, /*!< CAN SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt & EXTI Line28 Interrupt (USART3 wakeup) */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line 17 Interrupt */
+ TIM6_DAC1_IRQn = 54, /*!< TIM6 global and DAC1 channel1 & 2 underrun error interrupts */
+ TIM7_DAC2_IRQn = 55, /*!< TIM7 global and DAC2 channel1 underrun error Interrupt */
+ COMP2_IRQn = 64, /*!< COMP2 global Interrupt via EXT Line22 */
+ COMP4_6_IRQn = 65, /*!< COMP4 and COMP6 global Interrupt via EXT Line30 and 32 */
+ HRTIM1_Master_IRQn = 67, /*!< HRTIM Master Timer global Interrupts */
+ HRTIM1_TIMA_IRQn = 68, /*!< HRTIM Timer A global Interrupt */
+ HRTIM1_TIMB_IRQn = 69, /*!< HRTIM Timer B global Interrupt */
+ HRTIM1_TIMC_IRQn = 70, /*!< HRTIM Timer C global Interrupt */
+ HRTIM1_TIMD_IRQn = 71, /*!< HRTIM Timer D global Interrupt */
+ HRTIM1_TIME_IRQn = 72, /*!< HRTIM Timer E global Interrupt */
+ HRTIM1_FLT_IRQn = 73, /*!< HRTIM Fault global Interrupt */
+ FPU_IRQn = 81 /*!< Floating point Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f3xx.h" /* STM32F3xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */
+ uint32_t RESERVED0; /*!< Reserved, 0x010 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */
+ uint32_t RESERVED1; /*!< Reserved, 0x01C */
+ __IO uint32_t TR1; /*!< ADC watchdog threshold register 1, Address offset: 0x20 */
+ __IO uint32_t TR2; /*!< ADC watchdog threshold register 2, Address offset: 0x24 */
+ __IO uint32_t TR3; /*!< ADC watchdog threshold register 3, Address offset: 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x02C */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */
+ uint32_t RESERVED3; /*!< Reserved, 0x044 */
+ uint32_t RESERVED4; /*!< Reserved, 0x048 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */
+ uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */
+ __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */
+ __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */
+ __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */
+ __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */
+ uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */
+ uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */
+ __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */
+ __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */
+ uint32_t RESERVED8; /*!< Reserved, 0x0A8 */
+ uint32_t RESERVED9; /*!< Reserved, 0x0AC */
+ __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xB0 */
+ __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xB4 */
+
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */
+ uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1/3 base address + 0x30C */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief Analog Comparators
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt clear flag register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x20 */
+ __IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x24 */
+ __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register, Address offset: 0x28 */
+ __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register, Address offset: 0x2C */
+ __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register, Address offset: 0x30 */
+ __IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x34 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!< FLASH address register, Address offset: 0x14 */
+ uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!< FLASH Option byte register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!< FLASH Write register, Address offset: 0x20 */
+
+} FLASH_TypeDef;
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!<FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!<FLASH option byte user options, Address offset: 0x02 */
+ uint16_t RESERVED0; /*!< Reserved, 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t WRP0; /*!<FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!<FLASH option byte write protection 1, Address offset: 0x0C */
+ __IO uint16_t WRP2; /*!<FLASH option byte write protection 2, Address offset: 0x10 */
+ __IO uint16_t WRP3; /*!<FLASH option byte write protection 3, Address offset: 0x12 */
+} OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */
+ __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief Operational Amplifier (OPAMP)
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< OPAMP control and status register, Address offset: 0x00 */
+} OPAMP_TypeDef;
+
+/**
+ * @brief High resolution Timer (HRTIM)
+ */
+/* HRTIM master registers definition */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< HRTIM Master Timer control register, Address offset: 0x00 */
+ __IO uint32_t MISR; /*!< HRTIM Master Timer interrupt status register, Address offset: 0x04 */
+ __IO uint32_t MICR; /*!< HRTIM Master Timer interupt clear register, Address offset: 0x08 */
+ __IO uint32_t MDIER; /*!< HRTIM Master Timer DMA/interrupt enable register Address offset: 0x0C */
+ __IO uint32_t MCNTR; /*!< HRTIM Master Timer counter register, Address offset: 0x10 */
+ __IO uint32_t MPER; /*!< HRTIM Master Timer period register, Address offset: 0x14 */
+ __IO uint32_t MREP; /*!< HRTIM Master Timer repetition register, Address offset: 0x18 */
+ __IO uint32_t MCMP1R; /*!< HRTIM Master Timer compare 1 register, Address offset: 0x1C */
+ uint32_t RESERVED0; /*!< Reserved, 0x20 */
+ __IO uint32_t MCMP2R; /*!< HRTIM Master Timer compare 2 register, Address offset: 0x24 */
+ __IO uint32_t MCMP3R; /*!< HRTIM Master Timer compare 3 register, Address offset: 0x28 */
+ __IO uint32_t MCMP4R; /*!< HRTIM Master Timer compare 4 register, Address offset: 0x2C */
+ uint32_t RESERVED1[20]; /*!< Reserved, 0x30..0x7C */
+}HRTIM_Master_TypeDef;
+
+/* HRTIM Timer A to E registers definition */
+typedef struct
+{
+ __IO uint32_t TIMxCR; /*!< HRTIM Timerx control register, Address offset: 0x00 */
+ __IO uint32_t TIMxISR; /*!< HRTIM Timerx interrupt status register, Address offset: 0x04 */
+ __IO uint32_t TIMxICR; /*!< HRTIM Timerx interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t TIMxDIER; /*!< HRTIM Timerx DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t CNTxR; /*!< HRTIM Timerx counter register, Address offset: 0x10 */
+ __IO uint32_t PERxR; /*!< HRTIM Timerx period register, Address offset: 0x14 */
+ __IO uint32_t REPxR; /*!< HRTIM Timerx repetition register, Address offset: 0x18 */
+ __IO uint32_t CMP1xR; /*!< HRTIM Timerx compare 1 register, Address offset: 0x1C */
+ __IO uint32_t CMP1CxR; /*!< HRTIM Timerx compare 1 compound register, Address offset: 0x20 */
+ __IO uint32_t CMP2xR; /*!< HRTIM Timerx compare 2 register, Address offset: 0x24 */
+ __IO uint32_t CMP3xR; /*!< HRTIM Timerx compare 3 register, Address offset: 0x28 */
+ __IO uint32_t CMP4xR; /*!< HRTIM Timerx compare 4 register, Address offset: 0x2C */
+ __IO uint32_t CPT1xR; /*!< HRTIM Timerx capture 1 register, Address offset: 0x30 */
+ __IO uint32_t CPT2xR; /*!< HRTIM Timerx capture 2 register, Address offset: 0x34 */
+ __IO uint32_t DTxR; /*!< HRTIM Timerx dead time register, Address offset: 0x38 */
+ __IO uint32_t SETx1R; /*!< HRTIM Timerx output 1 set register, Address offset: 0x3C */
+ __IO uint32_t RSTx1R; /*!< HRTIM Timerx output 1 reset register, Address offset: 0x40 */
+ __IO uint32_t SETx2R; /*!< HRTIM Timerx output 2 set register, Address offset: 0x44 */
+ __IO uint32_t RSTx2R; /*!< HRTIM Timerx output 2 reset register, Address offset: 0x48 */
+ __IO uint32_t EEFxR1; /*!< HRTIM Timerx external event filtering 1 register, Address offset: 0x4C */
+ __IO uint32_t EEFxR2; /*!< HRTIM Timerx external event filtering 2 register, Address offset: 0x50 */
+ __IO uint32_t RSTxR; /*!< HRTIM Timerx Reset register, Address offset: 0x54 */
+ __IO uint32_t CHPxR; /*!< HRTIM Timerx Chopper register, Address offset: 0x58 */
+ __IO uint32_t CPT1xCR; /*!< HRTIM Timerx Capture 1 register, Address offset: 0x5C */
+ __IO uint32_t CPT2xCR; /*!< HRTIM Timerx Capture 2 register, Address offset: 0x60 */
+ __IO uint32_t OUTxR; /*!< HRTIM Timerx Output register, Address offset: 0x64 */
+ __IO uint32_t FLTxR; /*!< HRTIM Timerx Fault register, Address offset: 0x68 */
+ uint32_t RESERVED0[5]; /*!< Reserved, 0x6C..0x7C */
+}HRTIM_Timerx_TypeDef;
+
+/* HRTIM common register definition */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< HRTIM control register1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< HRTIM control register2, Address offset: 0x04 */
+ __IO uint32_t ISR; /*!< HRTIM interrupt status register, Address offset: 0x08 */
+ __IO uint32_t ICR; /*!< HRTIM interrupt clear register, Address offset: 0x0C */
+ __IO uint32_t IER; /*!< HRTIM interrupt enable register, Address offset: 0x10 */
+ __IO uint32_t OENR; /*!< HRTIM Output enable register, Address offset: 0x14 */
+ __IO uint32_t ODISR; /*!< HRTIM Output disable register, Address offset: 0x18 */
+ __IO uint32_t ODSR; /*!< HRTIM Output disable status register, Address offset: 0x1C */
+ __IO uint32_t BMCR; /*!< HRTIM Burst mode control register, Address offset: 0x20 */
+ __IO uint32_t BMTRGR; /*!< HRTIM Busrt mode trigger register, Address offset: 0x24 */
+ __IO uint32_t BMCMPR; /*!< HRTIM Burst mode compare register, Address offset: 0x28 */
+ __IO uint32_t BMPER; /*!< HRTIM Burst mode period register, Address offset: 0x2C */
+ __IO uint32_t EECR1; /*!< HRTIM Timer external event control register1, Address offset: 0x30 */
+ __IO uint32_t EECR2; /*!< HRTIM Timer external event control register2, Address offset: 0x34 */
+ __IO uint32_t EECR3; /*!< HRTIM Timer external event control register3, Address offset: 0x38 */
+ __IO uint32_t ADC1R; /*!< HRTIM ADC Trigger 1 register, Address offset: 0x3C */
+ __IO uint32_t ADC2R; /*!< HRTIM ADC Trigger 2 register, Address offset: 0x40 */
+ __IO uint32_t ADC3R; /*!< HRTIM ADC Trigger 3 register, Address offset: 0x44 */
+ __IO uint32_t ADC4R; /*!< HRTIM ADC Trigger 4 register, Address offset: 0x48 */
+ __IO uint32_t DLLCR; /*!< HRTIM DLL control register, Address offset: 0x4C */
+ __IO uint32_t FLTINR1; /*!< HRTIM Fault input register1, Address offset: 0x50 */
+ __IO uint32_t FLTINR2; /*!< HRTIM Fault input register2, Address offset: 0x54 */
+ __IO uint32_t BDMUPR; /*!< HRTIM Burst DMA Master Timer update register, Address offset: 0x58 */
+ __IO uint32_t BDTAUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x5C */
+ __IO uint32_t BDTBUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x60 */
+ __IO uint32_t BDTCUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x64 */
+ __IO uint32_t BDTDUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x68 */
+ __IO uint32_t BDTEUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x6C */
+ __IO uint32_t BDMADR; /*!< HRTIM Burst DMA Master Data register, Address offset: 0x70 */
+}HRTIM_Common_TypeDef;
+
+/* HRTIM register definition */
+typedef struct {
+ HRTIM_Master_TypeDef sMasterRegs;
+ HRTIM_Timerx_TypeDef sTimerxRegs[5];
+ uint32_t RESERVED0[32];
+ HRTIM_Common_TypeDef sCommonRegs;
+}HRTIM_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ __IO uint32_t RCR; /*!< SYSCFG CCM SRAM protection register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+ __IO uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t RESERVED1; /*!< Reserved, 0x20 */
+ __IO uint32_t RESERVED2; /*!< Reserved, 0x24 */
+ __IO uint32_t RESERVED4; /*!< Reserved, 0x28 */
+ __IO uint32_t RESERVED5; /*!< Reserved, 0x2C */
+ __IO uint32_t RESERVED6; /*!< Reserved, 0x30 */
+ __IO uint32_t RESERVED7; /*!< Reserved, 0x34 */
+ __IO uint32_t RESERVED8; /*!< Reserved, 0x38 */
+ __IO uint32_t RESERVED9; /*!< Reserved, 0x3C */
+ __IO uint32_t RESERVED10; /*!< Reserved, 0x40 */
+ __IO uint32_t RESERVED11; /*!< Reserved, 0x44 */
+ __IO uint32_t RESERVED12; /*!< Reserved, 0x48 */
+ __IO uint32_t RESERVED13; /*!< Reserved, 0x4C */
+ __IO uint32_t CFGR3; /*!< SYSCFG configuration register 3, Address offset: 0x50 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED0; /*!< Reserved, 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+ __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */
+ __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */
+ __IO uint32_t CCR6; /*!< TIM capture/compare register 4, Address offset: 0x5C */
+} TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+} TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 64KB) base address in the alias region */
+#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(4 KB) base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM(up to 12KB) base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+#define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(4 KB) base address in the bit-band region */
+#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM(up to 12KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+#define AHB3PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400)
+#define RTC_BASE (APB1PERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x00004400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x00004800)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400)
+#define CAN_BASE (APB1PERIPH_BASE + 0x00006400)
+#define PWR_BASE (APB1PERIPH_BASE + 0x00007000)
+#define DAC1_BASE (APB1PERIPH_BASE + 0x00007400)
+#define DAC2_BASE (APB1PERIPH_BASE + 0x00009800)
+#define DAC_BASE DAC1_BASE
+
+/*!< APB2 peripherals */
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000)
+#define COMP2_BASE (APB2PERIPH_BASE + 0x00000020)
+#define COMP4_BASE (APB2PERIPH_BASE + 0x00000028)
+#define COMP6_BASE (APB2PERIPH_BASE + 0x00000030)
+#define COMP_BASE COMP2_BASE
+#define OPAMP2_BASE (APB2PERIPH_BASE + 0x0000003C)
+#define OPAMP_BASE OPAMP2_BASE
+#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400)
+#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000)
+#define USART1_BASE (APB2PERIPH_BASE + 0x00003800)
+#define TIM15_BASE (APB2PERIPH_BASE + 0x00004000)
+#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400)
+#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800)
+#define HRTIM1_BASE (APB2PERIPH_BASE + 0x00007400)
+#define HRTIM1_TIMA_BASE (HRTIM1_BASE + 0x00000080)
+#define HRTIM1_TIMB_BASE (HRTIM1_BASE + 0x00000100)
+#define HRTIM1_TIMC_BASE (HRTIM1_BASE + 0x00000180)
+#define HRTIM1_TIMD_BASE (HRTIM1_BASE + 0x00000200)
+#define HRTIM1_TIME_BASE (HRTIM1_BASE + 0x00000280)
+#define HRTIM1_COMMON_BASE (HRTIM1_BASE + 0x00000380)
+
+/*!< AHB1 peripherals */
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (AHB1PERIPH_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (AHB1PERIPH_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (AHB1PERIPH_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (AHB1PERIPH_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (AHB1PERIPH_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (AHB1PERIPH_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (AHB1PERIPH_BASE + 0x00000080)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x00002000) /*!< Flash registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */
+#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHB1PERIPH_BASE + 0x00004000)
+
+/*!< AHB2 peripherals */
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/*!< AHB3 peripherals */
+#define ADC1_BASE (AHB3PERIPH_BASE + 0x00000000)
+#define ADC2_BASE (AHB3PERIPH_BASE + 0x00000100)
+#define ADC1_2_COMMON_BASE (AHB3PERIPH_BASE + 0x00000300)
+
+#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define HRTIM1 ((HRTIM_TypeDef *) HRTIM1_BASE)
+#define HRTIM1_TIMA ((HRTIM_TIM_TypeDef *) HRTIM1_TIMA_BASE)
+#define HRTIM1_TIMB ((HRTIM_TIM_TypeDef *) HRTIM1_TIMB_BASE)
+#define HRTIM1_TIMC ((HRTIM_TIM_TypeDef *) HRTIM1_TIMC_BASE)
+#define HRTIM1_TIMD ((HRTIM_TIM_TypeDef *) HRTIM1_TIMD_BASE)
+#define HRTIM1_TIME ((HRTIM_TIM_TypeDef *) HRTIM1_TIME_BASE)
+#define HRTIM1_COMMON ((HRTIM_Common_TypeDef *) HRTIM1_COMMON_BASE)
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define CAN ((CAN_TypeDef *) CAN_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC1 ((DAC_TypeDef *) DAC1_BASE)
+#define DAC2 ((DAC_TypeDef *) DAC2_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP2 ((COMP_TypeDef *) COMP2_BASE)
+#define COMP4 ((COMP_TypeDef *) COMP4_BASE)
+#define COMP6 ((COMP_TypeDef *) COMP6_BASE)
+#define COMP ((COMP_TypeDef *) COMP_BASE)
+#define OPAMP2 ((OPAMP_TypeDef *) OPAMP2_BASE)
+#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC1_2_COMMON ((ADC_Common_TypeDef *) ADC1_2_COMMON_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter SAR (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_ISR register ********************/
+#define ADC_ISR_ADRD ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) flag */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< ADC End of Sampling flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< ADC End of Regular Conversion flag */
+#define ADC_ISR_EOS ((uint32_t)0x00000008) /*!< ADC End of Regular sequence of Conversions flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< ADC overrun flag */
+#define ADC_ISR_JEOC ((uint32_t)0x00000020) /*!< ADC End of Injected Conversion flag */
+#define ADC_ISR_JEOS ((uint32_t)0x00000040) /*!< ADC End of Injected sequence of Conversions flag */
+#define ADC_ISR_AWD1 ((uint32_t)0x00000080) /*!< ADC Analog watchdog 1 flag */
+#define ADC_ISR_AWD2 ((uint32_t)0x00000100) /*!< ADC Analog watchdog 2 flag */
+#define ADC_ISR_AWD3 ((uint32_t)0x00000200) /*!< ADC Analog watchdog 3 flag */
+#define ADC_ISR_JQOVF ((uint32_t)0x00000400) /*!< ADC Injected Context Queue Overflow flag */
+
+/******************** Bit definition for ADC_IER register ********************/
+#define ADC_IER_RDY ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) interrupt source */
+#define ADC_IER_EOSMP ((uint32_t)0x00000002) /*!< ADC End of Sampling interrupt source */
+#define ADC_IER_EOC ((uint32_t)0x00000004) /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IER_EOS ((uint32_t)0x00000008) /*!< ADC End of Regular sequence of Conversions interrupt source */
+#define ADC_IER_OVR ((uint32_t)0x00000010) /*!< ADC overrun interrupt source */
+#define ADC_IER_JEOC ((uint32_t)0x00000020) /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IER_JEOS ((uint32_t)0x00000040) /*!< ADC End of Injected sequence of Conversions interrupt source */
+#define ADC_IER_AWD1 ((uint32_t)0x00000080) /*!< ADC Analog watchdog 1 interrupt source */
+#define ADC_IER_AWD2 ((uint32_t)0x00000100) /*!< ADC Analog watchdog 2 interrupt source */
+#define ADC_IER_AWD3 ((uint32_t)0x00000200) /*!< ADC Analog watchdog 3 interrupt source */
+#define ADC_IER_JQOVF ((uint32_t)0x00000400) /*!< ADC Injected Context Queue Overflow interrupt source */
+
+/******************** Bit definition for ADC_CR register ********************/
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC Enable control */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC Disable command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC Start of Regular conversion */
+#define ADC_CR_JADSTART ((uint32_t)0x00000008) /*!< ADC Start of injected conversion */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC Stop of Regular conversion */
+#define ADC_CR_JADSTP ((uint32_t)0x00000020) /*!< ADC Stop of injected conversion */
+#define ADC_CR_ADVREGEN ((uint32_t)0x30000000) /*!< ADC Voltage regulator Enable */
+#define ADC_CR_ADVREGEN_0 ((uint32_t)0x10000000) /*!< ADC ADVREGEN bit 0 */
+#define ADC_CR_ADVREGEN_1 ((uint32_t)0x20000000) /*!< ADC ADVREGEN bit 1 */
+#define ADC_CR_ADCALDIF ((uint32_t)0x40000000) /*!< ADC Differential Mode for calibration */
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC Calibration */
+
+/******************** Bit definition for ADC_CFGR register ********************/
+#define ADC_CFGR_DMAEN ((uint32_t)0x00000001) /*!< ADC DMA Enable */
+#define ADC_CFGR_DMACFG ((uint32_t)0x00000002) /*!< ADC DMA configuration */
+
+#define ADC_CFGR_RES ((uint32_t)0x00000018) /*!< ADC Data resolution */
+#define ADC_CFGR_RES_0 ((uint32_t)0x00000008) /*!< ADC RES bit 0 */
+#define ADC_CFGR_RES_1 ((uint32_t)0x00000010) /*!< ADC RES bit 1 */
+
+#define ADC_CFGR_ALIGN ((uint32_t)0x00000020) /*!< ADC Data Alignement */
+
+#define ADC_CFGR_EXTSEL ((uint32_t)0x000003C0) /*!< ADC External trigger selection for regular group */
+#define ADC_CFGR_EXTSEL_0 ((uint32_t)0x00000040) /*!< ADC EXTSEL bit 0 */
+#define ADC_CFGR_EXTSEL_1 ((uint32_t)0x00000080) /*!< ADC EXTSEL bit 1 */
+#define ADC_CFGR_EXTSEL_2 ((uint32_t)0x00000100) /*!< ADC EXTSEL bit 2 */
+#define ADC_CFGR_EXTSEL_3 ((uint32_t)0x00000200) /*!< ADC EXTSEL bit 3 */
+
+#define ADC_CFGR_EXTEN ((uint32_t)0x00000C00) /*!< ADC External trigger enable and polarity selection for regular channels */
+#define ADC_CFGR_EXTEN_0 ((uint32_t)0x00000400) /*!< ADC EXTEN bit 0 */
+#define ADC_CFGR_EXTEN_1 ((uint32_t)0x00000800) /*!< ADC EXTEN bit 1 */
+
+#define ADC_CFGR_OVRMOD ((uint32_t)0x00001000) /*!< ADC overrun mode */
+#define ADC_CFGR_CONT ((uint32_t)0x00002000) /*!< ADC Single/continuous conversion mode for regular conversion */
+#define ADC_CFGR_AUTDLY ((uint32_t)0x00004000) /*!< ADC Delayed conversion mode */
+#define ADC_CFGR_AUTOFF ((uint32_t)0x00008000) /*!< ADC Auto power OFF */
+#define ADC_CFGR_DISCEN ((uint32_t)0x00010000) /*!< ADC Discontinuous mode for regular channels */
+
+#define ADC_CFGR_DISCNUM ((uint32_t)0x000E0000) /*!< ADC Discontinuous mode channel count */
+#define ADC_CFGR_DISCNUM_0 ((uint32_t)0x00020000) /*!< ADC DISCNUM bit 0 */
+#define ADC_CFGR_DISCNUM_1 ((uint32_t)0x00040000) /*!< ADC DISCNUM bit 1 */
+#define ADC_CFGR_DISCNUM_2 ((uint32_t)0x00080000) /*!< ADC DISCNUM bit 2 */
+
+#define ADC_CFGR_JDISCEN ((uint32_t)0x00100000) /*!< ADC Discontinous mode on injected channels */
+#define ADC_CFGR_JQM ((uint32_t)0x00200000) /*!< ADC JSQR Queue mode */
+#define ADC_CFGR_AWD1SGL ((uint32_t)0x00400000) /*!< Eanble the watchdog 1 on a single channel or on all channels */
+#define ADC_CFGR_AWD1EN ((uint32_t)0x00800000) /*!< ADC Analog watchdog 1 enable on regular Channels */
+#define ADC_CFGR_JAWD1EN ((uint32_t)0x01000000) /*!< ADC Analog watchdog 1 enable on injected Channels */
+#define ADC_CFGR_JAUTO ((uint32_t)0x02000000) /*!< ADC Automatic injected group conversion */
+
+#define ADC_CFGR_AWD1CH ((uint32_t)0x7C000000) /*!< ADC Analog watchdog 1 Channel selection */
+#define ADC_CFGR_AWD1CH_0 ((uint32_t)0x04000000) /*!< ADC AWD1CH bit 0 */
+#define ADC_CFGR_AWD1CH_1 ((uint32_t)0x08000000) /*!< ADC AWD1CH bit 1 */
+#define ADC_CFGR_AWD1CH_2 ((uint32_t)0x10000000) /*!< ADC AWD1CH bit 2 */
+#define ADC_CFGR_AWD1CH_3 ((uint32_t)0x20000000) /*!< ADC AWD1CH bit 3 */
+#define ADC_CFGR_AWD1CH_4 ((uint32_t)0x40000000) /*!< ADC AWD1CH bit 4 */
+
+/******************** Bit definition for ADC_SMPR1 register ********************/
+#define ADC_SMPR1_SMP0 ((uint32_t)0x00000007) /*!< ADC Channel 0 Sampling time selection */
+#define ADC_SMPR1_SMP0_0 ((uint32_t)0x00000001) /*!< ADC SMP0 bit 0 */
+#define ADC_SMPR1_SMP0_1 ((uint32_t)0x00000002) /*!< ADC SMP0 bit 1 */
+#define ADC_SMPR1_SMP0_2 ((uint32_t)0x00000004) /*!< ADC SMP0 bit 2 */
+
+#define ADC_SMPR1_SMP1 ((uint32_t)0x00000038) /*!< ADC Channel 1 Sampling time selection */
+#define ADC_SMPR1_SMP1_0 ((uint32_t)0x00000008) /*!< ADC SMP1 bit 0 */
+#define ADC_SMPR1_SMP1_1 ((uint32_t)0x00000010) /*!< ADC SMP1 bit 1 */
+#define ADC_SMPR1_SMP1_2 ((uint32_t)0x00000020) /*!< ADC SMP1 bit 2 */
+
+#define ADC_SMPR1_SMP2 ((uint32_t)0x000001C0) /*!< ADC Channel 2 Sampling time selection */
+#define ADC_SMPR1_SMP2_0 ((uint32_t)0x00000040) /*!< ADC SMP2 bit 0 */
+#define ADC_SMPR1_SMP2_1 ((uint32_t)0x00000080) /*!< ADC SMP2 bit 1 */
+#define ADC_SMPR1_SMP2_2 ((uint32_t)0x00000100) /*!< ADC SMP2 bit 2 */
+
+#define ADC_SMPR1_SMP3 ((uint32_t)0x00000E00) /*!< ADC Channel 3 Sampling time selection */
+#define ADC_SMPR1_SMP3_0 ((uint32_t)0x00000200) /*!< ADC SMP3 bit 0 */
+#define ADC_SMPR1_SMP3_1 ((uint32_t)0x00000400) /*!< ADC SMP3 bit 1 */
+#define ADC_SMPR1_SMP3_2 ((uint32_t)0x00000800) /*!< ADC SMP3 bit 2 */
+
+#define ADC_SMPR1_SMP4 ((uint32_t)0x00007000) /*!< ADC Channel 4 Sampling time selection */
+#define ADC_SMPR1_SMP4_0 ((uint32_t)0x00001000) /*!< ADC SMP4 bit 0 */
+#define ADC_SMPR1_SMP4_1 ((uint32_t)0x00002000) /*!< ADC SMP4 bit 1 */
+#define ADC_SMPR1_SMP4_2 ((uint32_t)0x00004000) /*!< ADC SMP4 bit 2 */
+
+#define ADC_SMPR1_SMP5 ((uint32_t)0x00038000) /*!< ADC Channel 5 Sampling time selection */
+#define ADC_SMPR1_SMP5_0 ((uint32_t)0x00008000) /*!< ADC SMP5 bit 0 */
+#define ADC_SMPR1_SMP5_1 ((uint32_t)0x00010000) /*!< ADC SMP5 bit 1 */
+#define ADC_SMPR1_SMP5_2 ((uint32_t)0x00020000) /*!< ADC SMP5 bit 2 */
+
+#define ADC_SMPR1_SMP6 ((uint32_t)0x001C0000) /*!< ADC Channel 6 Sampling time selection */
+#define ADC_SMPR1_SMP6_0 ((uint32_t)0x00040000) /*!< ADC SMP6 bit 0 */
+#define ADC_SMPR1_SMP6_1 ((uint32_t)0x00080000) /*!< ADC SMP6 bit 1 */
+#define ADC_SMPR1_SMP6_2 ((uint32_t)0x00100000) /*!< ADC SMP6 bit 2 */
+
+#define ADC_SMPR1_SMP7 ((uint32_t)0x00E00000) /*!< ADC Channel 7 Sampling time selection */
+#define ADC_SMPR1_SMP7_0 ((uint32_t)0x00200000) /*!< ADC SMP7 bit 0 */
+#define ADC_SMPR1_SMP7_1 ((uint32_t)0x00400000) /*!< ADC SMP7 bit 1 */
+#define ADC_SMPR1_SMP7_2 ((uint32_t)0x00800000) /*!< ADC SMP7 bit 2 */
+
+#define ADC_SMPR1_SMP8 ((uint32_t)0x07000000) /*!< ADC Channel 8 Sampling time selection */
+#define ADC_SMPR1_SMP8_0 ((uint32_t)0x01000000) /*!< ADC SMP8 bit 0 */
+#define ADC_SMPR1_SMP8_1 ((uint32_t)0x02000000) /*!< ADC SMP8 bit 1 */
+#define ADC_SMPR1_SMP8_2 ((uint32_t)0x04000000) /*!< ADC SMP8 bit 2 */
+
+#define ADC_SMPR1_SMP9 ((uint32_t)0x38000000) /*!< ADC Channel 9 Sampling time selection */
+#define ADC_SMPR1_SMP9_0 ((uint32_t)0x08000000) /*!< ADC SMP9 bit 0 */
+#define ADC_SMPR1_SMP9_1 ((uint32_t)0x10000000) /*!< ADC SMP9 bit 1 */
+#define ADC_SMPR1_SMP9_2 ((uint32_t)0x20000000) /*!< ADC SMP9 bit 2 */
+
+/******************** Bit definition for ADC_SMPR2 register ********************/
+#define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< ADC Channel 10 Sampling time selection */
+#define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< ADC SMP10 bit 0 */
+#define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< ADC SMP10 bit 1 */
+#define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< ADC SMP10 bit 2 */
+
+#define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< ADC Channel 11 Sampling time selection */
+#define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< ADC SMP11 bit 0 */
+#define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< ADC SMP11 bit 1 */
+#define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< ADC SMP11 bit 2 */
+
+#define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< ADC Channel 12 Sampling time selection */
+#define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< ADC SMP12 bit 0 */
+#define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< ADC SMP12 bit 1 */
+#define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< ADC SMP12 bit 2 */
+
+#define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< ADC Channel 13 Sampling time selection */
+#define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< ADC SMP13 bit 0 */
+#define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< ADC SMP13 bit 1 */
+#define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< ADC SMP13 bit 2 */
+
+#define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< ADC Channel 14 Sampling time selection */
+#define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< ADC SMP14 bit 0 */
+#define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< ADC SMP14 bit 1 */
+#define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< ADC SMP14 bit 2 */
+
+#define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< ADC Channel 15 Sampling time selection */
+#define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< ADC SMP15 bit 0 */
+#define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< ADC SMP15 bit 1 */
+#define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< ADC SMP15 bit 2 */
+
+#define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< ADC Channel 16 Sampling time selection */
+#define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< ADC SMP16 bit 0 */
+#define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< ADC SMP16 bit 1 */
+#define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< ADC SMP16 bit 2 */
+
+#define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< ADC Channel 17 Sampling time selection */
+#define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< ADC SMP17 bit 0 */
+#define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< ADC SMP17 bit 1 */
+#define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< ADC SMP17 bit 2 */
+
+#define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< ADC Channel 18 Sampling time selection */
+#define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< ADC SMP18 bit 0 */
+#define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< ADC SMP18 bit 1 */
+#define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< ADC SMP18 bit 2 */
+
+/******************** Bit definition for ADC_TR1 register ********************/
+#define ADC_TR1_LT1 ((uint32_t)0x00000FFF) /*!< ADC Analog watchdog 1 lower threshold */
+#define ADC_TR1_LT1_0 ((uint32_t)0x00000001) /*!< ADC LT1 bit 0 */
+#define ADC_TR1_LT1_1 ((uint32_t)0x00000002) /*!< ADC LT1 bit 1 */
+#define ADC_TR1_LT1_2 ((uint32_t)0x00000004) /*!< ADC LT1 bit 2 */
+#define ADC_TR1_LT1_3 ((uint32_t)0x00000008) /*!< ADC LT1 bit 3 */
+#define ADC_TR1_LT1_4 ((uint32_t)0x00000010) /*!< ADC LT1 bit 4 */
+#define ADC_TR1_LT1_5 ((uint32_t)0x00000020) /*!< ADC LT1 bit 5 */
+#define ADC_TR1_LT1_6 ((uint32_t)0x00000040) /*!< ADC LT1 bit 6 */
+#define ADC_TR1_LT1_7 ((uint32_t)0x00000080) /*!< ADC LT1 bit 7 */
+#define ADC_TR1_LT1_8 ((uint32_t)0x00000100) /*!< ADC LT1 bit 8 */
+#define ADC_TR1_LT1_9 ((uint32_t)0x00000200) /*!< ADC LT1 bit 9 */
+#define ADC_TR1_LT1_10 ((uint32_t)0x00000400) /*!< ADC LT1 bit 10 */
+#define ADC_TR1_LT1_11 ((uint32_t)0x00000800) /*!< ADC LT1 bit 11 */
+
+#define ADC_TR1_HT1 ((uint32_t)0x0FFF0000) /*!< ADC Analog watchdog 1 higher threshold */
+#define ADC_TR1_HT1_0 ((uint32_t)0x00010000) /*!< ADC HT1 bit 0 */
+#define ADC_TR1_HT1_1 ((uint32_t)0x00020000) /*!< ADC HT1 bit 1 */
+#define ADC_TR1_HT1_2 ((uint32_t)0x00040000) /*!< ADC HT1 bit 2 */
+#define ADC_TR1_HT1_3 ((uint32_t)0x00080000) /*!< ADC HT1 bit 3 */
+#define ADC_TR1_HT1_4 ((uint32_t)0x00100000) /*!< ADC HT1 bit 4 */
+#define ADC_TR1_HT1_5 ((uint32_t)0x00200000) /*!< ADC HT1 bit 5 */
+#define ADC_TR1_HT1_6 ((uint32_t)0x00400000) /*!< ADC HT1 bit 6 */
+#define ADC_TR1_HT1_7 ((uint32_t)0x00800000) /*!< ADC HT1 bit 7 */
+#define ADC_TR1_HT1_8 ((uint32_t)0x01000000) /*!< ADC HT1 bit 8 */
+#define ADC_TR1_HT1_9 ((uint32_t)0x02000000) /*!< ADC HT1 bit 9 */
+#define ADC_TR1_HT1_10 ((uint32_t)0x04000000) /*!< ADC HT1 bit 10 */
+#define ADC_TR1_HT1_11 ((uint32_t)0x08000000) /*!< ADC HT1 bit 11 */
+
+/******************** Bit definition for ADC_TR2 register ********************/
+#define ADC_TR2_LT2 ((uint32_t)0x000000FF) /*!< ADC Analog watchdog 2 lower threshold */
+#define ADC_TR2_LT2_0 ((uint32_t)0x00000001) /*!< ADC LT2 bit 0 */
+#define ADC_TR2_LT2_1 ((uint32_t)0x00000002) /*!< ADC LT2 bit 1 */
+#define ADC_TR2_LT2_2 ((uint32_t)0x00000004) /*!< ADC LT2 bit 2 */
+#define ADC_TR2_LT2_3 ((uint32_t)0x00000008) /*!< ADC LT2 bit 3 */
+#define ADC_TR2_LT2_4 ((uint32_t)0x00000010) /*!< ADC LT2 bit 4 */
+#define ADC_TR2_LT2_5 ((uint32_t)0x00000020) /*!< ADC LT2 bit 5 */
+#define ADC_TR2_LT2_6 ((uint32_t)0x00000040) /*!< ADC LT2 bit 6 */
+#define ADC_TR2_LT2_7 ((uint32_t)0x00000080) /*!< ADC LT2 bit 7 */
+
+#define ADC_TR2_HT2 ((uint32_t)0x00FF0000) /*!< ADC Analog watchdog 2 higher threshold */
+#define ADC_TR2_HT2_0 ((uint32_t)0x00010000) /*!< ADC HT2 bit 0 */
+#define ADC_TR2_HT2_1 ((uint32_t)0x00020000) /*!< ADC HT2 bit 1 */
+#define ADC_TR2_HT2_2 ((uint32_t)0x00040000) /*!< ADC HT2 bit 2 */
+#define ADC_TR2_HT2_3 ((uint32_t)0x00080000) /*!< ADC HT2 bit 3 */
+#define ADC_TR2_HT2_4 ((uint32_t)0x00100000) /*!< ADC HT2 bit 4 */
+#define ADC_TR2_HT2_5 ((uint32_t)0x00200000) /*!< ADC HT2 bit 5 */
+#define ADC_TR2_HT2_6 ((uint32_t)0x00400000) /*!< ADC HT2 bit 6 */
+#define ADC_TR2_HT2_7 ((uint32_t)0x00800000) /*!< ADC HT2 bit 7 */
+
+/******************** Bit definition for ADC_TR3 register ********************/
+#define ADC_TR3_LT3 ((uint32_t)0x000000FF) /*!< ADC Analog watchdog 3 lower threshold */
+#define ADC_TR3_LT3_0 ((uint32_t)0x00000001) /*!< ADC LT3 bit 0 */
+#define ADC_TR3_LT3_1 ((uint32_t)0x00000002) /*!< ADC LT3 bit 1 */
+#define ADC_TR3_LT3_2 ((uint32_t)0x00000004) /*!< ADC LT3 bit 2 */
+#define ADC_TR3_LT3_3 ((uint32_t)0x00000008) /*!< ADC LT3 bit 3 */
+#define ADC_TR3_LT3_4 ((uint32_t)0x00000010) /*!< ADC LT3 bit 4 */
+#define ADC_TR3_LT3_5 ((uint32_t)0x00000020) /*!< ADC LT3 bit 5 */
+#define ADC_TR3_LT3_6 ((uint32_t)0x00000040) /*!< ADC LT3 bit 6 */
+#define ADC_TR3_LT3_7 ((uint32_t)0x00000080) /*!< ADC LT3 bit 7 */
+
+#define ADC_TR3_HT3 ((uint32_t)0x00FF0000) /*!< ADC Analog watchdog 3 higher threshold */
+#define ADC_TR3_HT3_0 ((uint32_t)0x00010000) /*!< ADC HT3 bit 0 */
+#define ADC_TR3_HT3_1 ((uint32_t)0x00020000) /*!< ADC HT3 bit 1 */
+#define ADC_TR3_HT3_2 ((uint32_t)0x00040000) /*!< ADC HT3 bit 2 */
+#define ADC_TR3_HT3_3 ((uint32_t)0x00080000) /*!< ADC HT3 bit 3 */
+#define ADC_TR3_HT3_4 ((uint32_t)0x00100000) /*!< ADC HT3 bit 4 */
+#define ADC_TR3_HT3_5 ((uint32_t)0x00200000) /*!< ADC HT3 bit 5 */
+#define ADC_TR3_HT3_6 ((uint32_t)0x00400000) /*!< ADC HT3 bit 6 */
+#define ADC_TR3_HT3_7 ((uint32_t)0x00800000) /*!< ADC HT3 bit 7 */
+
+/******************** Bit definition for ADC_SQR1 register ********************/
+#define ADC_SQR1_L ((uint32_t)0x0000000F) /*!< ADC regular channel sequence lenght */
+#define ADC_SQR1_L_0 ((uint32_t)0x00000001) /*!< ADC L bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00000002) /*!< ADC L bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00000004) /*!< ADC L bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00000008) /*!< ADC L bit 3 */
+
+#define ADC_SQR1_SQ1 ((uint32_t)0x000007C0) /*!< ADC 1st conversion in regular sequence */
+#define ADC_SQR1_SQ1_0 ((uint32_t)0x00000040) /*!< ADC SQ1 bit 0 */
+#define ADC_SQR1_SQ1_1 ((uint32_t)0x00000080) /*!< ADC SQ1 bit 1 */
+#define ADC_SQR1_SQ1_2 ((uint32_t)0x00000100) /*!< ADC SQ1 bit 2 */
+#define ADC_SQR1_SQ1_3 ((uint32_t)0x00000200) /*!< ADC SQ1 bit 3 */
+#define ADC_SQR1_SQ1_4 ((uint32_t)0x00000400) /*!< ADC SQ1 bit 4 */
+
+#define ADC_SQR1_SQ2 ((uint32_t)0x0001F000) /*!< ADC 2nd conversion in regular sequence */
+#define ADC_SQR1_SQ2_0 ((uint32_t)0x00001000) /*!< ADC SQ2 bit 0 */
+#define ADC_SQR1_SQ2_1 ((uint32_t)0x00002000) /*!< ADC SQ2 bit 1 */
+#define ADC_SQR1_SQ2_2 ((uint32_t)0x00004000) /*!< ADC SQ2 bit 2 */
+#define ADC_SQR1_SQ2_3 ((uint32_t)0x00008000) /*!< ADC SQ2 bit 3 */
+#define ADC_SQR1_SQ2_4 ((uint32_t)0x00010000) /*!< ADC SQ2 bit 4 */
+
+#define ADC_SQR1_SQ3 ((uint32_t)0x007C0000) /*!< ADC 3rd conversion in regular sequence */
+#define ADC_SQR1_SQ3_0 ((uint32_t)0x00040000) /*!< ADC SQ3 bit 0 */
+#define ADC_SQR1_SQ3_1 ((uint32_t)0x00080000) /*!< ADC SQ3 bit 1 */
+#define ADC_SQR1_SQ3_2 ((uint32_t)0x00100000) /*!< ADC SQ3 bit 2 */
+#define ADC_SQR1_SQ3_3 ((uint32_t)0x00200000) /*!< ADC SQ3 bit 3 */
+#define ADC_SQR1_SQ3_4 ((uint32_t)0x00400000) /*!< ADC SQ3 bit 4 */
+
+#define ADC_SQR1_SQ4 ((uint32_t)0x1F000000) /*!< ADC 4th conversion in regular sequence */
+#define ADC_SQR1_SQ4_0 ((uint32_t)0x01000000) /*!< ADC SQ4 bit 0 */
+#define ADC_SQR1_SQ4_1 ((uint32_t)0x02000000) /*!< ADC SQ4 bit 1 */
+#define ADC_SQR1_SQ4_2 ((uint32_t)0x04000000) /*!< ADC SQ4 bit 2 */
+#define ADC_SQR1_SQ4_3 ((uint32_t)0x08000000) /*!< ADC SQ4 bit 3 */
+#define ADC_SQR1_SQ4_4 ((uint32_t)0x10000000) /*!< ADC SQ4 bit 4 */
+
+/******************** Bit definition for ADC_SQR2 register ********************/
+#define ADC_SQR2_SQ5 ((uint32_t)0x0000001F) /*!< ADC 5th conversion in regular sequence */
+#define ADC_SQR2_SQ5_0 ((uint32_t)0x00000001) /*!< ADC SQ5 bit 0 */
+#define ADC_SQR2_SQ5_1 ((uint32_t)0x00000002) /*!< ADC SQ5 bit 1 */
+#define ADC_SQR2_SQ5_2 ((uint32_t)0x00000004) /*!< ADC SQ5 bit 2 */
+#define ADC_SQR2_SQ5_3 ((uint32_t)0x00000008) /*!< ADC SQ5 bit 3 */
+#define ADC_SQR2_SQ5_4 ((uint32_t)0x00000010) /*!< ADC SQ5 bit 4 */
+
+#define ADC_SQR2_SQ6 ((uint32_t)0x000007C0) /*!< ADC 6th conversion in regular sequence */
+#define ADC_SQR2_SQ6_0 ((uint32_t)0x00000040) /*!< ADC SQ6 bit 0 */
+#define ADC_SQR2_SQ6_1 ((uint32_t)0x00000080) /*!< ADC SQ6 bit 1 */
+#define ADC_SQR2_SQ6_2 ((uint32_t)0x00000100) /*!< ADC SQ6 bit 2 */
+#define ADC_SQR2_SQ6_3 ((uint32_t)0x00000200) /*!< ADC SQ6 bit 3 */
+#define ADC_SQR2_SQ6_4 ((uint32_t)0x00000400) /*!< ADC SQ6 bit 4 */
+
+#define ADC_SQR2_SQ7 ((uint32_t)0x0001F000) /*!< ADC 7th conversion in regular sequence */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00001000) /*!< ADC SQ7 bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00002000) /*!< ADC SQ7 bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00004000) /*!< ADC SQ7 bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00008000) /*!< ADC SQ7 bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00010000) /*!< ADC SQ7 bit 4 */
+
+#define ADC_SQR2_SQ8 ((uint32_t)0x007C0000) /*!< ADC 8th conversion in regular sequence */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00040000) /*!< ADC SQ8 bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00080000) /*!< ADC SQ8 bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00100000) /*!< ADC SQ8 bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00200000) /*!< ADC SQ8 bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00400000) /*!< ADC SQ8 bit 4 */
+
+#define ADC_SQR2_SQ9 ((uint32_t)0x1F000000) /*!< ADC 9th conversion in regular sequence */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x01000000) /*!< ADC SQ9 bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x02000000) /*!< ADC SQ9 bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x04000000) /*!< ADC SQ9 bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x08000000) /*!< ADC SQ9 bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x10000000) /*!< ADC SQ9 bit 4 */
+
+/******************** Bit definition for ADC_SQR3 register ********************/
+#define ADC_SQR3_SQ10 ((uint32_t)0x0000001F) /*!< ADC 10th conversion in regular sequence */
+#define ADC_SQR3_SQ10_0 ((uint32_t)0x00000001) /*!< ADC SQ10 bit 0 */
+#define ADC_SQR3_SQ10_1 ((uint32_t)0x00000002) /*!< ADC SQ10 bit 1 */
+#define ADC_SQR3_SQ10_2 ((uint32_t)0x00000004) /*!< ADC SQ10 bit 2 */
+#define ADC_SQR3_SQ10_3 ((uint32_t)0x00000008) /*!< ADC SQ10 bit 3 */
+#define ADC_SQR3_SQ10_4 ((uint32_t)0x00000010) /*!< ADC SQ10 bit 4 */
+
+#define ADC_SQR3_SQ11 ((uint32_t)0x000007C0) /*!< ADC 11th conversion in regular sequence */
+#define ADC_SQR3_SQ11_0 ((uint32_t)0x00000040) /*!< ADC SQ11 bit 0 */
+#define ADC_SQR3_SQ11_1 ((uint32_t)0x00000080) /*!< ADC SQ11 bit 1 */
+#define ADC_SQR3_SQ11_2 ((uint32_t)0x00000100) /*!< ADC SQ11 bit 2 */
+#define ADC_SQR3_SQ11_3 ((uint32_t)0x00000200) /*!< ADC SQ11 bit 3 */
+#define ADC_SQR3_SQ11_4 ((uint32_t)0x00000400) /*!< ADC SQ11 bit 4 */
+
+#define ADC_SQR3_SQ12 ((uint32_t)0x0001F000) /*!< ADC 12th conversion in regular sequence */
+#define ADC_SQR3_SQ12_0 ((uint32_t)0x00001000) /*!< ADC SQ12 bit 0 */
+#define ADC_SQR3_SQ12_1 ((uint32_t)0x00002000) /*!< ADC SQ12 bit 1 */
+#define ADC_SQR3_SQ12_2 ((uint32_t)0x00004000) /*!< ADC SQ12 bit 2 */
+#define ADC_SQR3_SQ12_3 ((uint32_t)0x00008000) /*!< ADC SQ12 bit 3 */
+#define ADC_SQR3_SQ12_4 ((uint32_t)0x00010000) /*!< ADC SQ12 bit 4 */
+
+#define ADC_SQR3_SQ13 ((uint32_t)0x007C0000) /*!< ADC 13th conversion in regular sequence */
+#define ADC_SQR3_SQ13_0 ((uint32_t)0x00040000) /*!< ADC SQ13 bit 0 */
+#define ADC_SQR3_SQ13_1 ((uint32_t)0x00080000) /*!< ADC SQ13 bit 1 */
+#define ADC_SQR3_SQ13_2 ((uint32_t)0x00100000) /*!< ADC SQ13 bit 2 */
+#define ADC_SQR3_SQ13_3 ((uint32_t)0x00200000) /*!< ADC SQ13 bit 3 */
+#define ADC_SQR3_SQ13_4 ((uint32_t)0x00400000) /*!< ADC SQ13 bit 4 */
+
+#define ADC_SQR3_SQ14 ((uint32_t)0x1F000000) /*!< ADC 14th conversion in regular sequence */
+#define ADC_SQR3_SQ14_0 ((uint32_t)0x01000000) /*!< ADC SQ14 bit 0 */
+#define ADC_SQR3_SQ14_1 ((uint32_t)0x02000000) /*!< ADC SQ14 bit 1 */
+#define ADC_SQR3_SQ14_2 ((uint32_t)0x04000000) /*!< ADC SQ14 bit 2 */
+#define ADC_SQR3_SQ14_3 ((uint32_t)0x08000000) /*!< ADC SQ14 bit 3 */
+#define ADC_SQR3_SQ14_4 ((uint32_t)0x10000000) /*!< ADC SQ14 bit 4 */
+
+/******************** Bit definition for ADC_SQR4 register ********************/
+#define ADC_SQR4_SQ15 ((uint32_t)0x0000001F) /*!< ADC 15th conversion in regular sequence */
+#define ADC_SQR4_SQ15_0 ((uint32_t)0x00000001) /*!< ADC SQ15 bit 0 */
+#define ADC_SQR4_SQ15_1 ((uint32_t)0x00000002) /*!< ADC SQ15 bit 1 */
+#define ADC_SQR4_SQ15_2 ((uint32_t)0x00000004) /*!< ADC SQ15 bit 2 */
+#define ADC_SQR4_SQ15_3 ((uint32_t)0x00000008) /*!< ADC SQ15 bit 3 */
+#define ADC_SQR4_SQ15_4 ((uint32_t)0x00000010) /*!< ADC SQ105 bit 4 */
+
+#define ADC_SQR4_SQ16 ((uint32_t)0x000007C0) /*!< ADC 16th conversion in regular sequence */
+#define ADC_SQR4_SQ16_0 ((uint32_t)0x00000040) /*!< ADC SQ16 bit 0 */
+#define ADC_SQR4_SQ16_1 ((uint32_t)0x00000080) /*!< ADC SQ16 bit 1 */
+#define ADC_SQR4_SQ16_2 ((uint32_t)0x00000100) /*!< ADC SQ16 bit 2 */
+#define ADC_SQR4_SQ16_3 ((uint32_t)0x00000200) /*!< ADC SQ16 bit 3 */
+#define ADC_SQR4_SQ16_4 ((uint32_t)0x00000400) /*!< ADC SQ16 bit 4 */
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_RDATA ((uint32_t)0x0000FFFF) /*!< ADC regular Data converted */
+#define ADC_DR_RDATA_0 ((uint32_t)0x00000001) /*!< ADC RDATA bit 0 */
+#define ADC_DR_RDATA_1 ((uint32_t)0x00000002) /*!< ADC RDATA bit 1 */
+#define ADC_DR_RDATA_2 ((uint32_t)0x00000004) /*!< ADC RDATA bit 2 */
+#define ADC_DR_RDATA_3 ((uint32_t)0x00000008) /*!< ADC RDATA bit 3 */
+#define ADC_DR_RDATA_4 ((uint32_t)0x00000010) /*!< ADC RDATA bit 4 */
+#define ADC_DR_RDATA_5 ((uint32_t)0x00000020) /*!< ADC RDATA bit 5 */
+#define ADC_DR_RDATA_6 ((uint32_t)0x00000040) /*!< ADC RDATA bit 6 */
+#define ADC_DR_RDATA_7 ((uint32_t)0x00000080) /*!< ADC RDATA bit 7 */
+#define ADC_DR_RDATA_8 ((uint32_t)0x00000100) /*!< ADC RDATA bit 8 */
+#define ADC_DR_RDATA_9 ((uint32_t)0x00000200) /*!< ADC RDATA bit 9 */
+#define ADC_DR_RDATA_10 ((uint32_t)0x00000400) /*!< ADC RDATA bit 10 */
+#define ADC_DR_RDATA_11 ((uint32_t)0x00000800) /*!< ADC RDATA bit 11 */
+#define ADC_DR_RDATA_12 ((uint32_t)0x00001000) /*!< ADC RDATA bit 12 */
+#define ADC_DR_RDATA_13 ((uint32_t)0x00002000) /*!< ADC RDATA bit 13 */
+#define ADC_DR_RDATA_14 ((uint32_t)0x00004000) /*!< ADC RDATA bit 14 */
+#define ADC_DR_RDATA_15 ((uint32_t)0x00008000) /*!< ADC RDATA bit 15 */
+
+/******************** Bit definition for ADC_JSQR register ********************/
+#define ADC_JSQR_JL ((uint32_t)0x00000003) /*!< ADC injected channel sequence length */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00000001) /*!< ADC JL bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00000002) /*!< ADC JL bit 1 */
+
+#define ADC_JSQR_JEXTSEL ((uint32_t)0x0000003C) /*!< ADC external trigger selection for injected group */
+#define ADC_JSQR_JEXTSEL_0 ((uint32_t)0x00000004) /*!< ADC JEXTSEL bit 0 */
+#define ADC_JSQR_JEXTSEL_1 ((uint32_t)0x00000008) /*!< ADC JEXTSEL bit 1 */
+#define ADC_JSQR_JEXTSEL_2 ((uint32_t)0x00000010) /*!< ADC JEXTSEL bit 2 */
+#define ADC_JSQR_JEXTSEL_3 ((uint32_t)0x00000020) /*!< ADC JEXTSEL bit 3 */
+
+#define ADC_JSQR_JEXTEN ((uint32_t)0x000000C0) /*!< ADC external trigger enable and polarity selection for injected channels */
+#define ADC_JSQR_JEXTEN_0 ((uint32_t)0x00000040) /*!< ADC JEXTEN bit 0 */
+#define ADC_JSQR_JEXTEN_1 ((uint32_t)0x00000080) /*!< ADC JEXTEN bit 1 */
+
+#define ADC_JSQR_JSQ1 ((uint32_t)0x00001F00) /*!< ADC 1st conversion in injected sequence */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000100) /*!< ADC JSQ1 bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000200) /*!< ADC JSQ1 bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000400) /*!< ADC JSQ1 bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000800) /*!< ADC JSQ1 bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00001000) /*!< ADC JSQ1 bit 4 */
+
+#define ADC_JSQR_JSQ2 ((uint32_t)0x0007C000) /*!< ADC 2nd conversion in injected sequence */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00004000) /*!< ADC JSQ2 bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00008000) /*!< ADC JSQ2 bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00010000) /*!< ADC JSQ2 bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00020000) /*!< ADC JSQ2 bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00040000) /*!< ADC JSQ2 bit 4 */
+
+#define ADC_JSQR_JSQ3 ((uint32_t)0x01F00000) /*!< ADC 3rd conversion in injected sequence */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00100000) /*!< ADC JSQ3 bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00200000) /*!< ADC JSQ3 bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00400000) /*!< ADC JSQ3 bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00800000) /*!< ADC JSQ3 bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x01000000) /*!< ADC JSQ3 bit 4 */
+
+#define ADC_JSQR_JSQ4 ((uint32_t)0x7C000000) /*!< ADC 4th conversion in injected sequence */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x04000000) /*!< ADC JSQ4 bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x08000000) /*!< ADC JSQ4 bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x10000000) /*!< ADC JSQ4 bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x20000000) /*!< ADC JSQ4 bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x40000000) /*!< ADC JSQ4 bit 4 */
+
+/******************** Bit definition for ADC_OFR1 register ********************/
+#define ADC_OFR1_OFFSET1 ((uint32_t)0x00000FFF) /*!< ADC data offset 1 for channel programmed into bits OFFSET1_CH[4:0] */
+#define ADC_OFR1_OFFSET1_0 ((uint32_t)0x00000001) /*!< ADC OFFSET1 bit 0 */
+#define ADC_OFR1_OFFSET1_1 ((uint32_t)0x00000002) /*!< ADC OFFSET1 bit 1 */
+#define ADC_OFR1_OFFSET1_2 ((uint32_t)0x00000004) /*!< ADC OFFSET1 bit 2 */
+#define ADC_OFR1_OFFSET1_3 ((uint32_t)0x00000008) /*!< ADC OFFSET1 bit 3 */
+#define ADC_OFR1_OFFSET1_4 ((uint32_t)0x00000010) /*!< ADC OFFSET1 bit 4 */
+#define ADC_OFR1_OFFSET1_5 ((uint32_t)0x00000020) /*!< ADC OFFSET1 bit 5 */
+#define ADC_OFR1_OFFSET1_6 ((uint32_t)0x00000040) /*!< ADC OFFSET1 bit 6 */
+#define ADC_OFR1_OFFSET1_7 ((uint32_t)0x00000080) /*!< ADC OFFSET1 bit 7 */
+#define ADC_OFR1_OFFSET1_8 ((uint32_t)0x00000100) /*!< ADC OFFSET1 bit 8 */
+#define ADC_OFR1_OFFSET1_9 ((uint32_t)0x00000200) /*!< ADC OFFSET1 bit 9 */
+#define ADC_OFR1_OFFSET1_10 ((uint32_t)0x00000400) /*!< ADC OFFSET1 bit 10 */
+#define ADC_OFR1_OFFSET1_11 ((uint32_t)0x00000800) /*!< ADC OFFSET1 bit 11 */
+
+#define ADC_OFR1_OFFSET1_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 1 */
+#define ADC_OFR1_OFFSET1_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET1_CH bit 0 */
+#define ADC_OFR1_OFFSET1_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET1_CH bit 1 */
+#define ADC_OFR1_OFFSET1_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET1_CH bit 2 */
+#define ADC_OFR1_OFFSET1_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET1_CH bit 3 */
+#define ADC_OFR1_OFFSET1_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET1_CH bit 4 */
+
+#define ADC_OFR1_OFFSET1_EN ((uint32_t)0x80000000) /*!< ADC offset 1 enable */
+
+/******************** Bit definition for ADC_OFR2 register ********************/
+#define ADC_OFR2_OFFSET2 ((uint32_t)0x00000FFF) /*!< ADC data offset 2 for channel programmed into bits OFFSET2_CH[4:0] */
+#define ADC_OFR2_OFFSET2_0 ((uint32_t)0x00000001) /*!< ADC OFFSET2 bit 0 */
+#define ADC_OFR2_OFFSET2_1 ((uint32_t)0x00000002) /*!< ADC OFFSET2 bit 1 */
+#define ADC_OFR2_OFFSET2_2 ((uint32_t)0x00000004) /*!< ADC OFFSET2 bit 2 */
+#define ADC_OFR2_OFFSET2_3 ((uint32_t)0x00000008) /*!< ADC OFFSET2 bit 3 */
+#define ADC_OFR2_OFFSET2_4 ((uint32_t)0x00000010) /*!< ADC OFFSET2 bit 4 */
+#define ADC_OFR2_OFFSET2_5 ((uint32_t)0x00000020) /*!< ADC OFFSET2 bit 5 */
+#define ADC_OFR2_OFFSET2_6 ((uint32_t)0x00000040) /*!< ADC OFFSET2 bit 6 */
+#define ADC_OFR2_OFFSET2_7 ((uint32_t)0x00000080) /*!< ADC OFFSET2 bit 7 */
+#define ADC_OFR2_OFFSET2_8 ((uint32_t)0x00000100) /*!< ADC OFFSET2 bit 8 */
+#define ADC_OFR2_OFFSET2_9 ((uint32_t)0x00000200) /*!< ADC OFFSET2 bit 9 */
+#define ADC_OFR2_OFFSET2_10 ((uint32_t)0x00000400) /*!< ADC OFFSET2 bit 10 */
+#define ADC_OFR2_OFFSET2_11 ((uint32_t)0x00000800) /*!< ADC OFFSET2 bit 11 */
+
+#define ADC_OFR2_OFFSET2_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 2 */
+#define ADC_OFR2_OFFSET2_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET2_CH bit 0 */
+#define ADC_OFR2_OFFSET2_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET2_CH bit 1 */
+#define ADC_OFR2_OFFSET2_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET2_CH bit 2 */
+#define ADC_OFR2_OFFSET2_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET2_CH bit 3 */
+#define ADC_OFR2_OFFSET2_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET2_CH bit 4 */
+
+#define ADC_OFR2_OFFSET2_EN ((uint32_t)0x80000000) /*!< ADC offset 2 enable */
+
+/******************** Bit definition for ADC_OFR3 register ********************/
+#define ADC_OFR3_OFFSET3 ((uint32_t)0x00000FFF) /*!< ADC data offset 3 for channel programmed into bits OFFSET3_CH[4:0] */
+#define ADC_OFR3_OFFSET3_0 ((uint32_t)0x00000001) /*!< ADC OFFSET3 bit 0 */
+#define ADC_OFR3_OFFSET3_1 ((uint32_t)0x00000002) /*!< ADC OFFSET3 bit 1 */
+#define ADC_OFR3_OFFSET3_2 ((uint32_t)0x00000004) /*!< ADC OFFSET3 bit 2 */
+#define ADC_OFR3_OFFSET3_3 ((uint32_t)0x00000008) /*!< ADC OFFSET3 bit 3 */
+#define ADC_OFR3_OFFSET3_4 ((uint32_t)0x00000010) /*!< ADC OFFSET3 bit 4 */
+#define ADC_OFR3_OFFSET3_5 ((uint32_t)0x00000020) /*!< ADC OFFSET3 bit 5 */
+#define ADC_OFR3_OFFSET3_6 ((uint32_t)0x00000040) /*!< ADC OFFSET3 bit 6 */
+#define ADC_OFR3_OFFSET3_7 ((uint32_t)0x00000080) /*!< ADC OFFSET3 bit 7 */
+#define ADC_OFR3_OFFSET3_8 ((uint32_t)0x00000100) /*!< ADC OFFSET3 bit 8 */
+#define ADC_OFR3_OFFSET3_9 ((uint32_t)0x00000200) /*!< ADC OFFSET3 bit 9 */
+#define ADC_OFR3_OFFSET3_10 ((uint32_t)0x00000400) /*!< ADC OFFSET3 bit 10 */
+#define ADC_OFR3_OFFSET3_11 ((uint32_t)0x00000800) /*!< ADC OFFSET3 bit 11 */
+
+#define ADC_OFR3_OFFSET3_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 3 */
+#define ADC_OFR3_OFFSET3_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET3_CH bit 0 */
+#define ADC_OFR3_OFFSET3_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET3_CH bit 1 */
+#define ADC_OFR3_OFFSET3_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET3_CH bit 2 */
+#define ADC_OFR3_OFFSET3_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET3_CH bit 3 */
+#define ADC_OFR3_OFFSET3_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET3_CH bit 4 */
+
+#define ADC_OFR3_OFFSET3_EN ((uint32_t)0x80000000) /*!< ADC offset 3 enable */
+
+/******************** Bit definition for ADC_OFR4 register ********************/
+#define ADC_OFR4_OFFSET4 ((uint32_t)0x00000FFF) /*!< ADC data offset 4 for channel programmed into bits OFFSET4_CH[4:0] */
+#define ADC_OFR4_OFFSET4_0 ((uint32_t)0x00000001) /*!< ADC OFFSET4 bit 0 */
+#define ADC_OFR4_OFFSET4_1 ((uint32_t)0x00000002) /*!< ADC OFFSET4 bit 1 */
+#define ADC_OFR4_OFFSET4_2 ((uint32_t)0x00000004) /*!< ADC OFFSET4 bit 2 */
+#define ADC_OFR4_OFFSET4_3 ((uint32_t)0x00000008) /*!< ADC OFFSET4 bit 3 */
+#define ADC_OFR4_OFFSET4_4 ((uint32_t)0x00000010) /*!< ADC OFFSET4 bit 4 */
+#define ADC_OFR4_OFFSET4_5 ((uint32_t)0x00000020) /*!< ADC OFFSET4 bit 5 */
+#define ADC_OFR4_OFFSET4_6 ((uint32_t)0x00000040) /*!< ADC OFFSET4 bit 6 */
+#define ADC_OFR4_OFFSET4_7 ((uint32_t)0x00000080) /*!< ADC OFFSET4 bit 7 */
+#define ADC_OFR4_OFFSET4_8 ((uint32_t)0x00000100) /*!< ADC OFFSET4 bit 8 */
+#define ADC_OFR4_OFFSET4_9 ((uint32_t)0x00000200) /*!< ADC OFFSET4 bit 9 */
+#define ADC_OFR4_OFFSET4_10 ((uint32_t)0x00000400) /*!< ADC OFFSET4 bit 10 */
+#define ADC_OFR4_OFFSET4_11 ((uint32_t)0x00000800) /*!< ADC OFFSET4 bit 11 */
+
+#define ADC_OFR4_OFFSET4_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 4 */
+#define ADC_OFR4_OFFSET4_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET4_CH bit 0 */
+#define ADC_OFR4_OFFSET4_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET4_CH bit 1 */
+#define ADC_OFR4_OFFSET4_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET4_CH bit 2 */
+#define ADC_OFR4_OFFSET4_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET4_CH bit 3 */
+#define ADC_OFR4_OFFSET4_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET4_CH bit 4 */
+
+#define ADC_OFR4_OFFSET4_EN ((uint32_t)0x80000000) /*!< ADC offset 4 enable */
+
+/******************** Bit definition for ADC_JDR1 register ********************/
+#define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR1_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR1_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR1_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR1_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR1_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR1_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR1_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR1_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR1_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR1_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR1_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR1_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR1_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR1_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR1_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR1_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR2 register ********************/
+#define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR2_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR2_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR2_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR2_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR2_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR2_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR2_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR2_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR2_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR2_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR2_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR2_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR2_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR2_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR2_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR2_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR3 register ********************/
+#define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR3_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR3_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR3_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR3_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR3_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR3_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR3_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR3_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR3_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR3_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR3_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR3_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR3_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR3_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR3_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR3_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR4 register ********************/
+#define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR4_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR4_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR4_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR4_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR4_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR4_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR4_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR4_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR4_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR4_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR4_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR4_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR4_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR4_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR4_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR4_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_AWD2CR register ********************/
+#define ADC_AWD2CR_AWD2CH ((uint32_t)0x0007FFFE) /*!< ADC Analog watchdog 2 channel selection */
+#define ADC_AWD2CR_AWD2CH_0 ((uint32_t)0x00000002) /*!< ADC AWD2CH bit 0 */
+#define ADC_AWD2CR_AWD2CH_1 ((uint32_t)0x00000004) /*!< ADC AWD2CH bit 1 */
+#define ADC_AWD2CR_AWD2CH_2 ((uint32_t)0x00000008) /*!< ADC AWD2CH bit 2 */
+#define ADC_AWD2CR_AWD2CH_3 ((uint32_t)0x00000010) /*!< ADC AWD2CH bit 3 */
+#define ADC_AWD2CR_AWD2CH_4 ((uint32_t)0x00000020) /*!< ADC AWD2CH bit 4 */
+#define ADC_AWD2CR_AWD2CH_5 ((uint32_t)0x00000040) /*!< ADC AWD2CH bit 5 */
+#define ADC_AWD2CR_AWD2CH_6 ((uint32_t)0x00000080) /*!< ADC AWD2CH bit 6 */
+#define ADC_AWD2CR_AWD2CH_7 ((uint32_t)0x00000100) /*!< ADC AWD2CH bit 7 */
+#define ADC_AWD2CR_AWD2CH_8 ((uint32_t)0x00000200) /*!< ADC AWD2CH bit 8 */
+#define ADC_AWD2CR_AWD2CH_9 ((uint32_t)0x00000400) /*!< ADC AWD2CH bit 9 */
+#define ADC_AWD2CR_AWD2CH_10 ((uint32_t)0x00000800) /*!< ADC AWD2CH bit 10 */
+#define ADC_AWD2CR_AWD2CH_11 ((uint32_t)0x00001000) /*!< ADC AWD2CH bit 11 */
+#define ADC_AWD2CR_AWD2CH_12 ((uint32_t)0x00002000) /*!< ADC AWD2CH bit 12 */
+#define ADC_AWD2CR_AWD2CH_13 ((uint32_t)0x00004000) /*!< ADC AWD2CH bit 13 */
+#define ADC_AWD2CR_AWD2CH_14 ((uint32_t)0x00008000) /*!< ADC AWD2CH bit 14 */
+#define ADC_AWD2CR_AWD2CH_15 ((uint32_t)0x00010000) /*!< ADC AWD2CH bit 15 */
+#define ADC_AWD2CR_AWD2CH_16 ((uint32_t)0x00020000) /*!< ADC AWD2CH bit 16 */
+#define ADC_AWD2CR_AWD2CH_17 ((uint32_t)0x00030000) /*!< ADC AWD2CH bit 17 */
+
+/******************** Bit definition for ADC_AWD3CR register ********************/
+#define ADC_AWD3CR_AWD3CH ((uint32_t)0x0007FFFE) /*!< ADC Analog watchdog 2 channel selection */
+#define ADC_AWD3CR_AWD3CH_0 ((uint32_t)0x00000002) /*!< ADC AWD3CH bit 0 */
+#define ADC_AWD3CR_AWD3CH_1 ((uint32_t)0x00000004) /*!< ADC AWD3CH bit 1 */
+#define ADC_AWD3CR_AWD3CH_2 ((uint32_t)0x00000008) /*!< ADC AWD3CH bit 2 */
+#define ADC_AWD3CR_AWD3CH_3 ((uint32_t)0x00000010) /*!< ADC AWD3CH bit 3 */
+#define ADC_AWD3CR_AWD3CH_4 ((uint32_t)0x00000020) /*!< ADC AWD3CH bit 4 */
+#define ADC_AWD3CR_AWD3CH_5 ((uint32_t)0x00000040) /*!< ADC AWD3CH bit 5 */
+#define ADC_AWD3CR_AWD3CH_6 ((uint32_t)0x00000080) /*!< ADC AWD3CH bit 6 */
+#define ADC_AWD3CR_AWD3CH_7 ((uint32_t)0x00000100) /*!< ADC AWD3CH bit 7 */
+#define ADC_AWD3CR_AWD3CH_8 ((uint32_t)0x00000200) /*!< ADC AWD3CH bit 8 */
+#define ADC_AWD3CR_AWD3CH_9 ((uint32_t)0x00000400) /*!< ADC AWD3CH bit 9 */
+#define ADC_AWD3CR_AWD3CH_10 ((uint32_t)0x00000800) /*!< ADC AWD3CH bit 10 */
+#define ADC_AWD3CR_AWD3CH_11 ((uint32_t)0x00001000) /*!< ADC AWD3CH bit 11 */
+#define ADC_AWD3CR_AWD3CH_12 ((uint32_t)0x00002000) /*!< ADC AWD3CH bit 12 */
+#define ADC_AWD3CR_AWD3CH_13 ((uint32_t)0x00004000) /*!< ADC AWD3CH bit 13 */
+#define ADC_AWD3CR_AWD3CH_14 ((uint32_t)0x00008000) /*!< ADC AWD3CH bit 14 */
+#define ADC_AWD3CR_AWD3CH_15 ((uint32_t)0x00010000) /*!< ADC AWD3CH bit 15 */
+#define ADC_AWD3CR_AWD3CH_16 ((uint32_t)0x00020000) /*!< ADC AWD3CH bit 16 */
+#define ADC_AWD3CR_AWD3CH_17 ((uint32_t)0x00030000) /*!< ADC AWD3CH bit 17 */
+
+/******************** Bit definition for ADC_DIFSEL register ********************/
+#define ADC_DIFSEL_DIFSEL ((uint32_t)0x0007FFFE) /*!< ADC differential modes for channels 1 to 18 */
+#define ADC_DIFSEL_DIFSEL_0 ((uint32_t)0x00000002) /*!< ADC DIFSEL bit 0 */
+#define ADC_DIFSEL_DIFSEL_1 ((uint32_t)0x00000004) /*!< ADC DIFSEL bit 1 */
+#define ADC_DIFSEL_DIFSEL_2 ((uint32_t)0x00000008) /*!< ADC DIFSEL bit 2 */
+#define ADC_DIFSEL_DIFSEL_3 ((uint32_t)0x00000010) /*!< ADC DIFSEL bit 3 */
+#define ADC_DIFSEL_DIFSEL_4 ((uint32_t)0x00000020) /*!< ADC DIFSEL bit 4 */
+#define ADC_DIFSEL_DIFSEL_5 ((uint32_t)0x00000040) /*!< ADC DIFSEL bit 5 */
+#define ADC_DIFSEL_DIFSEL_6 ((uint32_t)0x00000080) /*!< ADC DIFSEL bit 6 */
+#define ADC_DIFSEL_DIFSEL_7 ((uint32_t)0x00000100) /*!< ADC DIFSEL bit 7 */
+#define ADC_DIFSEL_DIFSEL_8 ((uint32_t)0x00000200) /*!< ADC DIFSEL bit 8 */
+#define ADC_DIFSEL_DIFSEL_9 ((uint32_t)0x00000400) /*!< ADC DIFSEL bit 9 */
+#define ADC_DIFSEL_DIFSEL_10 ((uint32_t)0x00000800) /*!< ADC DIFSEL bit 10 */
+#define ADC_DIFSEL_DIFSEL_11 ((uint32_t)0x00001000) /*!< ADC DIFSEL bit 11 */
+#define ADC_DIFSEL_DIFSEL_12 ((uint32_t)0x00002000) /*!< ADC DIFSEL bit 12 */
+#define ADC_DIFSEL_DIFSEL_13 ((uint32_t)0x00004000) /*!< ADC DIFSEL bit 13 */
+#define ADC_DIFSEL_DIFSEL_14 ((uint32_t)0x00008000) /*!< ADC DIFSEL bit 14 */
+#define ADC_DIFSEL_DIFSEL_15 ((uint32_t)0x00010000) /*!< ADC DIFSEL bit 15 */
+#define ADC_DIFSEL_DIFSEL_16 ((uint32_t)0x00020000) /*!< ADC DIFSEL bit 16 */
+#define ADC_DIFSEL_DIFSEL_17 ((uint32_t)0x00030000) /*!< ADC DIFSEL bit 17 */
+
+/******************** Bit definition for ADC_CALFACT register ********************/
+#define ADC_CALFACT_CALFACT_S ((uint32_t)0x0000007F) /*!< ADC calibration factors in single-ended mode */
+#define ADC_CALFACT_CALFACT_S_0 ((uint32_t)0x00000001) /*!< ADC CALFACT_S bit 0 */
+#define ADC_CALFACT_CALFACT_S_1 ((uint32_t)0x00000002) /*!< ADC CALFACT_S bit 1 */
+#define ADC_CALFACT_CALFACT_S_2 ((uint32_t)0x00000004) /*!< ADC CALFACT_S bit 2 */
+#define ADC_CALFACT_CALFACT_S_3 ((uint32_t)0x00000008) /*!< ADC CALFACT_S bit 3 */
+#define ADC_CALFACT_CALFACT_S_4 ((uint32_t)0x00000010) /*!< ADC CALFACT_S bit 4 */
+#define ADC_CALFACT_CALFACT_S_5 ((uint32_t)0x00000020) /*!< ADC CALFACT_S bit 5 */
+#define ADC_CALFACT_CALFACT_S_6 ((uint32_t)0x00000040) /*!< ADC CALFACT_S bit 6 */
+#define ADC_CALFACT_CALFACT_D ((uint32_t)0x007F0000) /*!< ADC calibration factors in differential mode */
+#define ADC_CALFACT_CALFACT_D_0 ((uint32_t)0x00010000) /*!< ADC CALFACT_D bit 0 */
+#define ADC_CALFACT_CALFACT_D_1 ((uint32_t)0x00020000) /*!< ADC CALFACT_D bit 1 */
+#define ADC_CALFACT_CALFACT_D_2 ((uint32_t)0x00040000) /*!< ADC CALFACT_D bit 2 */
+#define ADC_CALFACT_CALFACT_D_3 ((uint32_t)0x00080000) /*!< ADC CALFACT_D bit 3 */
+#define ADC_CALFACT_CALFACT_D_4 ((uint32_t)0x00100000) /*!< ADC CALFACT_D bit 4 */
+#define ADC_CALFACT_CALFACT_D_5 ((uint32_t)0x00200000) /*!< ADC CALFACT_D bit 5 */
+#define ADC_CALFACT_CALFACT_D_6 ((uint32_t)0x00400000) /*!< ADC CALFACT_D bit 6 */
+
+/************************* ADC Common registers *****************************/
+/******************** Bit definition for ADC12_CSR register ********************/
+#define ADC12_CSR_ADRDY_MST ((uint32_t)0x00000001) /*!< Master ADC ready */
+#define ADC12_CSR_ADRDY_EOSMP_MST ((uint32_t)0x00000002) /*!< End of sampling phase flag of the master ADC */
+#define ADC12_CSR_ADRDY_EOC_MST ((uint32_t)0x00000004) /*!< End of regular conversion of the master ADC */
+#define ADC12_CSR_ADRDY_EOS_MST ((uint32_t)0x00000008) /*!< End of regular sequence flag of the master ADC */
+#define ADC12_CSR_ADRDY_OVR_MST ((uint32_t)0x00000010) /*!< Overrun flag of the master ADC */
+#define ADC12_CSR_ADRDY_JEOC_MST ((uint32_t)0x00000020) /*!< End of injected conversion of the master ADC */
+#define ADC12_CSR_ADRDY_JEOS_MST ((uint32_t)0x00000040) /*!< End of injected sequence flag of the master ADC */
+#define ADC12_CSR_AWD1_MST ((uint32_t)0x00000080) /*!< Analog watchdog 1 flag of the master ADC */
+#define ADC12_CSR_AWD2_MST ((uint32_t)0x00000100) /*!< Analog watchdog 2 flag of the master ADC */
+#define ADC12_CSR_AWD3_MST ((uint32_t)0x00000200) /*!< Analog watchdog 3 flag of the master ADC */
+#define ADC12_CSR_JQOVF_MST ((uint32_t)0x00000400) /*!< Injected context queue overflow flag of the master ADC */
+#define ADC12_CSR_ADRDY_SLV ((uint32_t)0x00010000) /*!< Slave ADC ready */
+#define ADC12_CSR_ADRDY_EOSMP_SLV ((uint32_t)0x00020000) /*!< End of sampling phase flag of the slave ADC */
+#define ADC12_CSR_ADRDY_EOC_SLV ((uint32_t)0x00040000) /*!< End of regular conversion of the slave ADC */
+#define ADC12_CSR_ADRDY_EOS_SLV ((uint32_t)0x00080000) /*!< End of regular sequence flag of the slave ADC */
+#define ADC12_CSR_ADRDY_OVR_SLV ((uint32_t)0x00100000) /*!< Overrun flag of the slave ADC */
+#define ADC12_CSR_ADRDY_JEOC_SLV ((uint32_t)0x00200000) /*!< End of injected conversion of the slave ADC */
+#define ADC12_CSR_ADRDY_JEOS_SLV ((uint32_t)0x00400000) /*!< End of injected sequence flag of the slave ADC */
+#define ADC12_CSR_AWD1_SLV ((uint32_t)0x00800000) /*!< Analog watchdog 1 flag of the slave ADC */
+#define ADC12_CSR_AWD2_SLV ((uint32_t)0x01000000) /*!< Analog watchdog 2 flag of the slave ADC */
+#define ADC12_CSR_AWD3_SLV ((uint32_t)0x02000000) /*!< Analog watchdog 3 flag of the slave ADC */
+#define ADC12_CSR_JQOVF_SLV ((uint32_t)0x04000000) /*!< Injected context queue overflow flag of the slave ADC */
+
+/******************** Bit definition for ADC34_CSR register ********************/
+#define ADC34_CSR_ADRDY_MST ((uint32_t)0x00000001) /*!< Master ADC ready */
+#define ADC34_CSR_ADRDY_EOSMP_MST ((uint32_t)0x00000002) /*!< End of sampling phase flag of the master ADC */
+#define ADC34_CSR_ADRDY_EOC_MST ((uint32_t)0x00000004) /*!< End of regular conversion of the master ADC */
+#define ADC34_CSR_ADRDY_EOS_MST ((uint32_t)0x00000008) /*!< End of regular sequence flag of the master ADC */
+#define ADC34_CSR_ADRDY_OVR_MST ((uint32_t)0x00000010) /*!< Overrun flag of the master ADC */
+#define ADC34_CSR_ADRDY_JEOC_MST ((uint32_t)0x00000020) /*!< End of injected conversion of the master ADC */
+#define ADC34_CSR_ADRDY_JEOS_MST ((uint32_t)0x00000040) /*!< End of injected sequence flag of the master ADC */
+#define ADC34_CSR_AWD1_MST ((uint32_t)0x00000080) /*!< Analog watchdog 1 flag of the master ADC */
+#define ADC34_CSR_AWD2_MST ((uint32_t)0x00000100) /*!< Analog watchdog 2 flag of the master ADC */
+#define ADC34_CSR_AWD3_MST ((uint32_t)0x00000200) /*!< Analog watchdog 3 flag of the master ADC */
+#define ADC34_CSR_JQOVF_MST ((uint32_t)0x00000400) /*!< Injected context queue overflow flag of the master ADC */
+#define ADC34_CSR_ADRDY_SLV ((uint32_t)0x00010000) /*!< Slave ADC ready */
+#define ADC34_CSR_ADRDY_EOSMP_SLV ((uint32_t)0x00020000) /*!< End of sampling phase flag of the slave ADC */
+#define ADC34_CSR_ADRDY_EOC_SLV ((uint32_t)0x00040000) /*!< End of regular conversion of the slave ADC */
+#define ADC34_CSR_ADRDY_EOS_SLV ((uint32_t)0x00080000) /*!< End of regular sequence flag of the slave ADC */
+#define ADC12_CSR_ADRDY_OVR_SLV ((uint32_t)0x00100000) /*!< Overrun flag of the slave ADC */
+#define ADC34_CSR_ADRDY_JEOC_SLV ((uint32_t)0x00200000) /*!< End of injected conversion of the slave ADC */
+#define ADC34_CSR_ADRDY_JEOS_SLV ((uint32_t)0x00400000) /*!< End of injected sequence flag of the slave ADC */
+#define ADC34_CSR_AWD1_SLV ((uint32_t)0x00800000) /*!< Analog watchdog 1 flag of the slave ADC */
+#define ADC34_CSR_AWD2_SLV ((uint32_t)0x01000000) /*!< Analog watchdog 2 flag of the slave ADC */
+#define ADC34_CSR_AWD3_SLV ((uint32_t)0x02000000) /*!< Analog watchdog 3 flag of the slave ADC */
+#define ADC34_CSR_JQOVF_SLV ((uint32_t)0x04000000) /*!< Injected context queue overflow flag of the slave ADC */
+
+/******************** Bit definition for ADC_CCR register ********************/
+#define ADC12_CCR_MULTI ((uint32_t)0x0000001F) /*!< Multi ADC mode selection */
+#define ADC12_CCR_MULTI_0 ((uint32_t)0x00000001) /*!< MULTI bit 0 */
+#define ADC12_CCR_MULTI_1 ((uint32_t)0x00000002) /*!< MULTI bit 1 */
+#define ADC12_CCR_MULTI_2 ((uint32_t)0x00000004) /*!< MULTI bit 2 */
+#define ADC12_CCR_MULTI_3 ((uint32_t)0x00000008) /*!< MULTI bit 3 */
+#define ADC12_CCR_MULTI_4 ((uint32_t)0x00000010) /*!< MULTI bit 4 */
+#define ADC12_CCR_DELAY ((uint32_t)0x00000F00) /*!< Delay between 2 sampling phases */
+#define ADC12_CCR_DELAY_0 ((uint32_t)0x00000100) /*!< DELAY bit 0 */
+#define ADC12_CCR_DELAY_1 ((uint32_t)0x00000200) /*!< DELAY bit 1 */
+#define ADC12_CCR_DELAY_2 ((uint32_t)0x00000400) /*!< DELAY bit 2 */
+#define ADC12_CCR_DELAY_3 ((uint32_t)0x00000800) /*!< DELAY bit 3 */
+#define ADC12_CCR_DMACFG ((uint32_t)0x00002000) /*!< DMA configuration for multi-ADC mode */
+#define ADC12_CCR_MDMA ((uint32_t)0x0000C000) /*!< DMA mode for multi-ADC mode */
+#define ADC12_CCR_MDMA_0 ((uint32_t)0x00004000) /*!< MDMA bit 0 */
+#define ADC12_CCR_MDMA_1 ((uint32_t)0x00008000) /*!< MDMA bit 1 */
+#define ADC12_CCR_CKMODE ((uint32_t)0x00030000) /*!< ADC clock mode */
+#define ADC12_CCR_CKMODE_0 ((uint32_t)0x00010000) /*!< CKMODE bit 0 */
+#define ADC12_CCR_CKMODE_1 ((uint32_t)0x00020000) /*!< CKMODE bit 1 */
+#define ADC12_CCR_VREFEN ((uint32_t)0x00400000) /*!< VREFINT enable */
+#define ADC12_CCR_TSEN ((uint32_t)0x00800000) /*!< Temperature sensor enable */
+#define ADC12_CCR_VBATEN ((uint32_t)0x01000000) /*!< VBAT enable */
+
+/******************** Bit definition for ADC_CDR register ********************/
+#define ADC12_CDR_RDATA_MST ((uint32_t)0x0000FFFF) /*!< Regular Data of the master ADC */
+#define ADC12_CDR_RDATA_MST_0 ((uint32_t)0x00000001) /*!< RDATA_MST bit 0 */
+#define ADC12_CDR_RDATA_MST_1 ((uint32_t)0x00000002) /*!< RDATA_MST bit 1 */
+#define ADC12_CDR_RDATA_MST_2 ((uint32_t)0x00000004) /*!< RDATA_MST bit 2 */
+#define ADC12_CDR_RDATA_MST_3 ((uint32_t)0x00000008) /*!< RDATA_MST bit 3 */
+#define ADC12_CDR_RDATA_MST_4 ((uint32_t)0x00000010) /*!< RDATA_MST bit 4 */
+#define ADC12_CDR_RDATA_MST_5 ((uint32_t)0x00000020) /*!< RDATA_MST bit 5 */
+#define ADC12_CDR_RDATA_MST_6 ((uint32_t)0x00000040) /*!< RDATA_MST bit 6 */
+#define ADC12_CDR_RDATA_MST_7 ((uint32_t)0x00000080) /*!< RDATA_MST bit 7 */
+#define ADC12_CDR_RDATA_MST_8 ((uint32_t)0x00000100) /*!< RDATA_MST bit 8 */
+#define ADC12_CDR_RDATA_MST_9 ((uint32_t)0x00000200) /*!< RDATA_MST bit 9 */
+#define ADC12_CDR_RDATA_MST_10 ((uint32_t)0x00000400) /*!< RDATA_MST bit 10 */
+#define ADC12_CDR_RDATA_MST_11 ((uint32_t)0x00000800) /*!< RDATA_MST bit 11 */
+#define ADC12_CDR_RDATA_MST_12 ((uint32_t)0x00001000) /*!< RDATA_MST bit 12 */
+#define ADC12_CDR_RDATA_MST_13 ((uint32_t)0x00002000) /*!< RDATA_MST bit 13 */
+#define ADC12_CDR_RDATA_MST_14 ((uint32_t)0x00004000) /*!< RDATA_MST bit 14 */
+#define ADC12_CDR_RDATA_MST_15 ((uint32_t)0x00008000) /*!< RDATA_MST bit 15 */
+
+#define ADC12_CDR_RDATA_SLV ((uint32_t)0xFFFF0000) /*!< Regular Data of the master ADC */
+#define ADC12_CDR_RDATA_SLV_0 ((uint32_t)0x00010000) /*!< RDATA_SLV bit 0 */
+#define ADC12_CDR_RDATA_SLV_1 ((uint32_t)0x00020000) /*!< RDATA_SLV bit 1 */
+#define ADC12_CDR_RDATA_SLV_2 ((uint32_t)0x00040000) /*!< RDATA_SLV bit 2 */
+#define ADC12_CDR_RDATA_SLV_3 ((uint32_t)0x00080000) /*!< RDATA_SLV bit 3 */
+#define ADC12_CDR_RDATA_SLV_4 ((uint32_t)0x00100000) /*!< RDATA_SLV bit 4 */
+#define ADC12_CDR_RDATA_SLV_5 ((uint32_t)0x00200000) /*!< RDATA_SLV bit 5 */
+#define ADC12_CDR_RDATA_SLV_6 ((uint32_t)0x00400000) /*!< RDATA_SLV bit 6 */
+#define ADC12_CDR_RDATA_SLV_7 ((uint32_t)0x00800000) /*!< RDATA_SLV bit 7 */
+#define ADC12_CDR_RDATA_SLV_8 ((uint32_t)0x01000000) /*!< RDATA_SLV bit 8 */
+#define ADC12_CDR_RDATA_SLV_9 ((uint32_t)0x02000000) /*!< RDATA_SLV bit 9 */
+#define ADC12_CDR_RDATA_SLV_10 ((uint32_t)0x04000000) /*!< RDATA_SLV bit 10 */
+#define ADC12_CDR_RDATA_SLV_11 ((uint32_t)0x08000000) /*!< RDATA_SLV bit 11 */
+#define ADC12_CDR_RDATA_SLV_12 ((uint32_t)0x10000000) /*!< RDATA_SLV bit 12 */
+#define ADC12_CDR_RDATA_SLV_13 ((uint32_t)0x20000000) /*!< RDATA_SLV bit 13 */
+#define ADC12_CDR_RDATA_SLV_14 ((uint32_t)0x40000000) /*!< RDATA_SLV bit 14 */
+#define ADC12_CDR_RDATA_SLV_15 ((uint32_t)0x80000000) /*!< RDATA_SLV bit 15 */
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/********************** Bit definition for COMP2_CSR register ***************/
+#define COMP2_CSR_COMP2EN ((uint32_t)0x00000001) /*!< COMP2 enable */
+#define COMP2_CSR_COMP2INSEL ((uint32_t)0x00400070) /*!< COMP2 inverting input select */
+#define COMP2_CSR_COMP2INSEL_0 ((uint32_t)0x00000010) /*!< COMP2 inverting input select bit 0 */
+#define COMP2_CSR_COMP2INSEL_1 ((uint32_t)0x00000020) /*!< COMP2 inverting input select bit 1 */
+#define COMP2_CSR_COMP2INSEL_2 ((uint32_t)0x00000040) /*!< COMP2 inverting input select bit 2 */
+#define COMP2_CSR_COMP2INSEL_3 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 3 */
+#define COMP2_CSR_COMP2OUTSEL ((uint32_t)0x00003C00) /*!< COMP2 output select */
+#define COMP2_CSR_COMP2OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP2 output select bit 0 */
+#define COMP2_CSR_COMP2OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP2 output select bit 1 */
+#define COMP2_CSR_COMP2OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP2 output select bit 2 */
+#define COMP2_CSR_COMP2OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP2 output select bit 3 */
+#define COMP2_CSR_COMP2POL ((uint32_t)0x00008000) /*!< COMP2 output polarity */
+#define COMP2_CSR_COMP2BLANKING ((uint32_t)0x000C0000) /*!< COMP2 blanking */
+#define COMP2_CSR_COMP2BLANKING_0 ((uint32_t)0x00040000) /*!< COMP2 blanking bit 0 */
+#define COMP2_CSR_COMP2BLANKING_1 ((uint32_t)0x00080000) /*!< COMP2 blanking bit 1 */
+#define COMP2_CSR_COMP2BLANKING_2 ((uint32_t)0x00100000) /*!< COMP2 blanking bit 2 */
+#define COMP2_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP2_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+
+/********************** Bit definition for COMP4_CSR register ***************/
+#define COMP4_CSR_COMP4EN ((uint32_t)0x00000001) /*!< COMP4 enable */
+#define COMP4_CSR_COMP4INSEL ((uint32_t)0x00400070) /*!< COMP4 inverting input select */
+#define COMP4_CSR_COMP4INSEL_0 ((uint32_t)0x00000010) /*!< COMP4 inverting input select bit 0 */
+#define COMP4_CSR_COMP4INSEL_1 ((uint32_t)0x00000020) /*!< COMP4 inverting input select bit 1 */
+#define COMP4_CSR_COMP4INSEL_2 ((uint32_t)0x00000040) /*!< COMP4 inverting input select bit 2 */
+#define COMP4_CSR_COMP4INSEL_3 ((uint32_t)0x00400000) /*!< COMP4 inverting input select bit 3 */
+#define COMP4_CSR_COMP4OUTSEL ((uint32_t)0x00003C00) /*!< COMP4 output select */
+#define COMP4_CSR_COMP4OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP4 output select bit 0 */
+#define COMP4_CSR_COMP4OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP4 output select bit 1 */
+#define COMP4_CSR_COMP4OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP4 output select bit 2 */
+#define COMP4_CSR_COMP4OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP4 output select bit 3 */
+#define COMP4_CSR_COMP4POL ((uint32_t)0x00008000) /*!< COMP4 output polarity */
+#define COMP4_CSR_COMP4BLANKING ((uint32_t)0x000C0000) /*!< COMP4 blanking */
+#define COMP4_CSR_COMP4BLANKING_0 ((uint32_t)0x00040000) /*!< COMP4 blanking bit 0 */
+#define COMP4_CSR_COMP4BLANKING_1 ((uint32_t)0x00080000) /*!< COMP4 blanking bit 1 */
+#define COMP4_CSR_COMP4BLANKING_2 ((uint32_t)0x00100000) /*!< COMP4 blanking bit 2 */
+#define COMP4_CSR_COMP4OUT ((uint32_t)0x40000000) /*!< COMP4 output level */
+#define COMP4_CSR_COMP4LOCK ((uint32_t)0x80000000) /*!< COMP4 lock */
+
+/********************** Bit definition for COMP6_CSR register ***************/
+#define COMP6_CSR_COMP6EN ((uint32_t)0x00000001) /*!< COMP6 enable */
+#define COMP6_CSR_COMP6INSEL ((uint32_t)0x00400070) /*!< COMP6 inverting input select */
+#define COMP6_CSR_COMP6INSEL_0 ((uint32_t)0x00000010) /*!< COMP6 inverting input select bit 0 */
+#define COMP6_CSR_COMP6INSEL_1 ((uint32_t)0x00000020) /*!< COMP6 inverting input select bit 1 */
+#define COMP6_CSR_COMP6INSEL_2 ((uint32_t)0x00000040) /*!< COMP6 inverting input select bit 2 */
+#define COMP6_CSR_COMP6INSEL_3 ((uint32_t)0x00400000) /*!< COMP6 inverting input select bit 3 */
+#define COMP6_CSR_COMP6OUTSEL ((uint32_t)0x00003C00) /*!< COMP6 output select */
+#define COMP6_CSR_COMP6OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP6 output select bit 0 */
+#define COMP6_CSR_COMP6OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP6 output select bit 1 */
+#define COMP6_CSR_COMP6OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP6 output select bit 2 */
+#define COMP6_CSR_COMP6OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP6 output select bit 3 */
+#define COMP6_CSR_COMP6POL ((uint32_t)0x00008000) /*!< COMP6 output polarity */
+#define COMP6_CSR_COMP6BLANKING ((uint32_t)0x000C0000) /*!< COMP6 blanking */
+#define COMP6_CSR_COMP6BLANKING_0 ((uint32_t)0x00040000) /*!< COMP6 blanking bit 0 */
+#define COMP6_CSR_COMP6BLANKING_1 ((uint32_t)0x00080000) /*!< COMP6 blanking bit 1 */
+#define COMP6_CSR_COMP6BLANKING_2 ((uint32_t)0x00100000) /*!< COMP6 blanking bit 2 */
+#define COMP6_CSR_COMP6OUT ((uint32_t)0x40000000) /*!< COMP6 output level */
+#define COMP6_CSR_COMP6LOCK ((uint32_t)0x80000000) /*!< COMP6 lock */
+
+/********************** Bit definition for COMP_CSR register ****************/
+#define COMP_CSR_COMPxEN ((uint32_t)0x00000001) /*!< COMPx enable */
+#define COMP_CSR_COMPxINSEL ((uint32_t)0x00400070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint32_t)0x00000010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint32_t)0x00000020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint32_t)0x00000040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxINSEL_3 ((uint32_t)0x00400000) /*!< COMPx inverting input select bit 3 */
+#define COMP_CSR_COMPxOUTSEL ((uint32_t)0x00003C00) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint32_t)0x00000400) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint32_t)0x00000800) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint32_t)0x00001000) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxOUTSEL_3 ((uint32_t)0x00002000) /*!< COMPx output select bit 3 */
+#define COMP_CSR_COMPxPOL ((uint32_t)0x00008000) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxBLANKING ((uint32_t)0x000C0000) /*!< COMPx blanking */
+#define COMP_CSR_COMPxBLANKING_0 ((uint32_t)0x00040000) /*!< COMPx blanking bit 0 */
+#define COMP_CSR_COMPxBLANKING_1 ((uint32_t)0x00080000) /*!< COMPx blanking bit 1 */
+#define COMP_CSR_COMPxBLANKING_2 ((uint32_t)0x00100000) /*!< COMPx blanking bit 2 */
+#define COMP_CSR_COMPxOUT ((uint32_t)0x40000000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint32_t)0x80000000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* Operational Amplifier (OPAMP) */
+/* */
+/******************************************************************************/
+/********************* Bit definition for OPAMP2_CSR register ***************/
+#define OPAMP2_CSR_OPAMP2EN ((uint32_t)0x00000001) /*!< OPAMP2 enable */
+#define OPAMP2_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP2_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP2_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP2_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP2_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP2_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP2_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP2_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP2_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP2_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP2_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP2_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP2_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP2_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP2_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP2_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP2_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP2_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP2_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP2_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP2_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP2_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP2_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP2_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP2_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP2_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP2_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMPx_CSR register ***************/
+#define OPAMP_CSR_OPAMPxEN ((uint32_t)0x00000001) /*!< OPAMP enable */
+#define OPAMP_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint32_t)0x00000001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint32_t)0x00000002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint32_t)0x00000004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint32_t)0x00000008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint32_t)0x00000010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint32_t)0x00000020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint32_t)0x00000040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint32_t)0x00000080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint32_t)0x00008000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint32_t)0x00000001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint32_t)0x00000002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint32_t)0x00000004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint32_t)0x00000008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint32_t)0x00000010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint32_t)0x00000100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint32_t)0x00000200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint32_t)0x00000400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint32_t)0x00000800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint32_t)0x00000003) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint32_t)0x00000008) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint32_t)0x00000010) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint32_t)0x00000020) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint32_t)0x00000003) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint32_t)0x00000008) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint32_t)0x00000010) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint32_t)0x00000020) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS1_0 ((uint32_t)0x00010000) /*!<Time Segment 1 (Bit 0) */
+#define CAN_BTR_TS1_1 ((uint32_t)0x00020000) /*!<Time Segment 1 (Bit 1) */
+#define CAN_BTR_TS1_2 ((uint32_t)0x00040000) /*!<Time Segment 1 (Bit 2) */
+#define CAN_BTR_TS1_3 ((uint32_t)0x00080000) /*!<Time Segment 1 (Bit 3) */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_TS2_0 ((uint32_t)0x00100000) /*!<Time Segment 2 (Bit 0) */
+#define CAN_BTR_TS2_1 ((uint32_t)0x00200000) /*!<Time Segment 2 (Bit 1) */
+#define CAN_BTR_TS2_2 ((uint32_t)0x00400000) /*!<Time Segment 2 (Bit 2) */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_SJW_0 ((uint32_t)0x01000000) /*!<Resynchronization Jump Width (Bit 0) */
+#define CAN_BTR_SJW_1 ((uint32_t)0x02000000) /*!<Resynchronization Jump Width (Bit 1) */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint32_t)0x00000001) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint32_t)0x00003FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint32_t)0x00000001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint32_t)0x00000002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint32_t)0x00000004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint32_t)0x00000008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint32_t)0x00000010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint32_t)0x00000020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint32_t)0x00000040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint32_t)0x00000080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint32_t)0x00000100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint32_t)0x00000200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint32_t)0x00000400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint32_t)0x00000800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint32_t)0x00001000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint32_t)0x00002000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint32_t)0x00003FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint32_t)0x00000001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint32_t)0x00000002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint32_t)0x00000004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint32_t)0x00000008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint32_t)0x00000010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint32_t)0x00000020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint32_t)0x00000040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint32_t)0x00000080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint32_t)0x00000100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint32_t)0x00000200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint32_t)0x00000400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint32_t)0x00000800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint32_t)0x00001000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint32_t)0x00002000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint32_t)0x00003FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint32_t)0x00000001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint32_t)0x00000002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint32_t)0x00000004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint32_t)0x00000008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint32_t)0x00000010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint32_t)0x00000020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint32_t)0x00000040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint32_t)0x00000080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint32_t)0x00000100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint32_t)0x00000200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint32_t)0x00000400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint32_t)0x00000800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint32_t)0x00001000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint32_t)0x00002000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint32_t)0x00003FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint32_t)0x00000001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint32_t)0x00000002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint32_t)0x00000004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint32_t)0x00000008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint32_t)0x00000010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint32_t)0x00000020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint32_t)0x00000040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint32_t)0x00000080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint32_t)0x00000100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint32_t)0x00000200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint32_t)0x00000400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint32_t)0x00000800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint32_t)0x00001000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint32_t)0x00002000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint32_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLYSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLYSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLYSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun IT enable */
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun IT enable */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint32_t)0x00000FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_CAN_STOP ((uint32_t)0x02000000)
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB2_FZ_DBG_HRTIM1_STOP ((uint32_t)0x00000100)
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR1/EXTI_IMR2 register ********/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR24 ((uint32_t)0x01000000) /*!< Interrupt Mask on line 24 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR26 ((uint32_t)0x04000000) /*!< Interrupt Mask on line 26 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+#define EXTI_IMR_MR28 ((uint32_t)0x10000000) /*!< Interrupt Mask on line 28 */
+
+/******************* Bit definition for EXTI_EMR1/EXTI_EMR2 register ********/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR24 ((uint32_t)0x01000000) /*!< Event Mask on line 24 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR26 ((uint32_t)0x04000000) /*!< Event Mask on line 26 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+#define EXTI_EMR_MR28 ((uint32_t)0x10000000) /*!< Event Mask on line 28 */
+
+/****************** Bit definition for EXTI_RTSR1/EXTI_RTSR2 register *******/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+#define EXTI_RTSR_TR23 ((uint32_t)0x00800000) /*!< Rising trigger event configuration bit of line 23 */
+#define EXTI_RTSR_TR24 ((uint32_t)0x01000000) /*!< Rising trigger event configuration bit of line 24 */
+#define EXTI_RTSR_TR25 ((uint32_t)0x02000000) /*!< Rising trigger event configuration bit of line 25 */
+#define EXTI_RTSR_TR26 ((uint32_t)0x04000000) /*!< Rising trigger event configuration bit of line 26 */
+#define EXTI_RTSR_TR27 ((uint32_t)0x08000000) /*!< Rising trigger event configuration bit of line 27 */
+#define EXTI_RTSR_TR28 ((uint32_t)0x10000000) /*!< Rising trigger event configuration bit of line 28 */
+
+/****************** Bit definition for EXTI_FTSR1/EXTI_FTSR2 register *******/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+#define EXTI_FTSR_TR23 ((uint32_t)0x00800000) /*!< Falling trigger event configuration bit of line 23 */
+#define EXTI_FTSR_TR24 ((uint32_t)0x01000000) /*!< Falling trigger event configuration bit of line 24 */
+#define EXTI_FTSR_TR25 ((uint32_t)0x02000000) /*!< Falling trigger event configuration bit of line 25 */
+#define EXTI_FTSR_TR26 ((uint32_t)0x04000000) /*!< Falling trigger event configuration bit of line 26 */
+#define EXTI_FTSR_TR27 ((uint32_t)0x08000000) /*!< Falling trigger event configuration bit of line 27 */
+#define EXTI_FTSR_TR28 ((uint32_t)0x10000000) /*!< Falling trigger event configuration bit of line 28 */
+
+/****************** Bit definition for EXTI_SWIER1/EXTI_SWIER2 register *****/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+#define EXTI_SWIER_SWIER23 ((uint32_t)0x00800000) /*!< Software Interrupt on line 23 */
+#define EXTI_SWIER_SWIER24 ((uint32_t)0x01000000) /*!< Software Interrupt on line 24 */
+#define EXTI_SWIER_SWIER25 ((uint32_t)0x02000000) /*!< Software Interrupt on line 25 */
+#define EXTI_SWIER_SWIER26 ((uint32_t)0x04000000) /*!< Software Interrupt on line 26 */
+#define EXTI_SWIER_SWIER27 ((uint32_t)0x08000000) /*!< Software Interrupt on line 27 */
+#define EXTI_SWIER_SWIER28 ((uint32_t)0x10000000) /*!< Software Interrupt on line 28 */
+
+/******************* Bit definition for EXTI_PR1/EXTI_PR2 register **********/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit for line 22 */
+#define EXTI_PR_PR23 ((uint32_t)0x00800000) /*!< Pending bit for line 23 */
+#define EXTI_PR_PR24 ((uint32_t)0x01000000) /*!< Pending bit for line 24 */
+#define EXTI_PR_PR25 ((uint32_t)0x02000000) /*!< Pending bit for line 25 */
+#define EXTI_PR_PR26 ((uint32_t)0x04000000) /*!< Pending bit for line 26 */
+#define EXTI_PR_PR27 ((uint32_t)0x08000000) /*!< Pending bit for line 27 */
+#define EXTI_PR_PR28 ((uint32_t)0x10000000) /*!< Pending bit for line 28 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000007) /*!< LATENCY[2:0] bits (Latency) */
+#define FLASH_ACR_LATENCY_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FLASH_ACR_LATENCY_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FLASH_ACR_LATENCY_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+#define FLASH_ACR_HLFCYA ((uint32_t)0x00000008) /*!< Flash Half Cycle Access Enable */
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+#define RDP_KEY ((uint32_t)0x000000A5) /*!< RDP Key */
+#define FLASH_KEY1 ((uint32_t)0x45670123) /*!< FPEC Key1 */
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) /*!< FPEC Key2 */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+#define FLASH_OPTKEY1 FLASH_KEY1 /*!< Option Byte Key1 */
+#define FLASH_OPTKEY2 FLASH_KEY2 /*!< Option Byte Key2 */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< OptionBytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT ((uint32_t)0x00000006) /*!< Read protection */
+#define FLASH_OBR_RDPRT_1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT_2 ((uint32_t)0x00000006) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00007700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA_MONITOR */
+#define FLASH_OBR_SRAM_PE ((uint32_t)0x00004000) /*!< SRAM_PE */
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for FLASH_WRP0 register ******************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP1 register ******************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP2 register ******************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP3 register ******************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+/******************************************************************************/
+/* */
+/* General Purpose I/O (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* High Resolution Timer (HRTIM) */
+/* */
+/******************************************************************************/
+/******************** Master Timer control register ***************************/
+#define HRTIM_MCR_CK_PSC ((uint32_t)0x00000007) /*!< Prescaler mask */
+#define HRTIM_MCR_CK_PSC_0 ((uint32_t)0x00000001) /*!< Prescaler bit 0 */
+#define HRTIM_MCR_CK_PSC_1 ((uint32_t)0x00000002) /*!< Prescaler bit 1 */
+#define HRTIM_MCR_CK_PSC_2 ((uint32_t)0x00000004) /*!< Prescaler bit 2 */
+
+#define HRTIM_MCR_CONT ((uint32_t)0x00000008) /*!< Continuous mode */
+#define HRTIM_MCR_RETRIG ((uint32_t)0x00000010) /*!< Rettrigreable mode */
+#define HRTIM_MCR_HALF ((uint32_t)0x00000020) /*!< Half mode */
+
+#define HRTIM_MCR_SYNC_IN ((uint32_t)0x00000300) /*!< Synchronization input master */
+#define HRTIM_MCR_SYNC_IN_0 ((uint32_t)0x00000100) /*!< Synchronization input bit 0 */
+#define HRTIM_MCR_SYNC_IN_1 ((uint32_t)0x00000200) /*!< Synchronization input bit 1 */
+#define HRTIM_MCR_SYNCRSTM ((uint32_t)0x00000400) /*!< Synchronization reset master */
+#define HRTIM_MCR_SYNCSTRTM ((uint32_t)0x00000800) /*!< Synchronization start master */
+#define HRTIM_MCR_SYNC_OUT ((uint32_t)0x00003000) /*!< Synchronization output master */
+#define HRTIM_MCR_SYNC_OUT_0 ((uint32_t)0x00001000) /*!< Synchronization output bit 0 */
+#define HRTIM_MCR_SYNC_OUT_1 ((uint32_t)0x00002000) /*!< Synchronization output bit 1 */
+#define HRTIM_MCR_SYNC_SRC ((uint32_t)0x0000C000) /*!< Synchronization source */
+#define HRTIM_MCR_SYNC_SRC_0 ((uint32_t)0x00004000) /*!< Synchronization source bit 0 */
+#define HRTIM_MCR_SYNC_SRC_1 ((uint32_t)0x00008000) /*!< Synchronization source bit 1 */
+
+#define HRTIM_MCR_MCEN ((uint32_t)0x00010000) /*!< Master counter enable */
+#define HRTIM_MCR_TACEN ((uint32_t)0x00020000) /*!< Timer A counter enable */
+#define HRTIM_MCR_TBCEN ((uint32_t)0x00040000) /*!< Timer B counter enable */
+#define HRTIM_MCR_TCCEN ((uint32_t)0x00080000) /*!< Timer C counter enable */
+#define HRTIM_MCR_TDCEN ((uint32_t)0x00100000) /*!< Timer D counter enable */
+#define HRTIM_MCR_TECEN ((uint32_t)0x00200000) /*!< Timer E counter enable */
+
+#define HRTIM_MCR_DACSYNC ((uint32_t)0x06000000) /*!< DAC sychronization mask */
+#define HRTIM_MCR_DACSYNC_0 ((uint32_t)0x02000000) /*!< DAC sychronization bit 0 */
+#define HRTIM_MCR_DACSYNC_1 ((uint32_t)0x04000000) /*!< DAC sychronization bit 1 */
+
+#define HRTIM_MCR_PREEN ((uint32_t)0x08000000) /*!< Master preload enable */
+#define HRTIM_MCR_MREPU ((uint32_t)0x20000000) /*!< Master repetition update */
+
+#define HRTIM_MCR_BRSTDMA ((uint32_t)0xC0000000) /*!< Burst DMA update */
+#define HRTIM_MCR_BRSTDMA_0 ((uint32_t)0x40000000) /*!< Burst DMA update bit 0*/
+#define HRTIM_MCR_BRSTDMA_1 ((uint32_t)0x80000000) /*!< Burst DMA update bit 1 */
+
+/******************** Master Timer Interrupt status register ******************/
+#define HRTIM_MISR_MCMP1 ((uint32_t)0x00000001) /*!< Master compare 1 interrupt flag */
+#define HRTIM_MISR_MCMP2 ((uint32_t)0x00000002) /*!< Master compare 2 interrupt flag */
+#define HRTIM_MISR_MCMP3 ((uint32_t)0x00000004) /*!< Master compare 3 interrupt flag */
+#define HRTIM_MISR_MCMP4 ((uint32_t)0x00000008) /*!< Master compare 4 interrupt flag */
+#define HRTIM_MISR_MREP ((uint32_t)0x00000010) /*!< Master Repetition interrupt flag */
+#define HRTIM_MISR_SYNC ((uint32_t)0x00000020) /*!< Synchronization input interrupt flag */
+#define HRTIM_MISR_MUPD ((uint32_t)0x00000040) /*!< Master update interrupt flag */
+
+/******************** Master Timer Interrupt clear register *******************/
+#define HRTIM_MICR_MCMP1 ((uint32_t)0x00000001) /*!< Master compare 1 interrupt flag clear */
+#define HRTIM_MICR_MCMP2 ((uint32_t)0x00000002) /*!< Master compare 2 interrupt flag clear */
+#define HRTIM_MICR_MCMP3 ((uint32_t)0x00000004) /*!< Master compare 3 interrupt flag clear */
+#define HRTIM_MICR_MCMP4 ((uint32_t)0x00000008) /*!< Master compare 4 interrupt flag clear */
+#define HRTIM_MICR_MREP ((uint32_t)0x00000010) /*!< Master Repetition interrupt flag clear */
+#define HRTIM_MICR_SYNC ((uint32_t)0x00000020) /*!< Synchronization input interrupt flag clear */
+#define HRTIM_MICR_MUPD ((uint32_t)0x00000040) /*!< Master update interrupt flag clear */
+
+/******************** Master Timer DMA/Interrupt enable register **************/
+#define HRTIM_MDIER_MCMP1IE ((uint32_t)0x00000001) /*!< Master compare 1 interrupt enable */
+#define HRTIM_MDIER_MCMP2IE ((uint32_t)0x00000002) /*!< Master compare 2 interrupt enable */
+#define HRTIM_MDIER_MCMP3IE ((uint32_t)0x00000004) /*!< Master compare 3 interrupt enable */
+#define HRTIM_MDIER_MCMP4IE ((uint32_t)0x00000008) /*!< Master compare 4 interrupt enable */
+#define HRTIM_MDIER_MREPIE ((uint32_t)0x00000010) /*!< Master Repetition interrupt enable */
+#define HRTIM_MDIER_SYNCIE ((uint32_t)0x00000020) /*!< Synchronization input interrupt enable */
+#define HRTIM_MDIER_MUPDIE ((uint32_t)0x00000040) /*!< Master update interrupt enable */
+
+#define HRTIM_MDIER_MCMP1DE ((uint32_t)0x00010000) /*!< Master compare 1 DMA enable */
+#define HRTIM_MDIER_MCMP2DE ((uint32_t)0x00020000) /*!< Master compare 2 DMA enable */
+#define HRTIM_MDIER_MCMP3DE ((uint32_t)0x00040000) /*!< Master compare 3 DMA enable */
+#define HRTIM_MDIER_MCMP4DE ((uint32_t)0x00080000) /*!< Master compare 4 DMA enable */
+#define HRTIM_MDIER_MREPDE ((uint32_t)0x00100000) /*!< Master Repetition DMA enable */
+#define HRTIM_MDIER_SYNCDE ((uint32_t)0x00200000) /*!< Synchronization input DMA enable */
+#define HRTIM_MDIER_MUPDDE ((uint32_t)0x00400000) /*!< Master update DMA enable */
+
+/******************* Bit definition for HRTIM_MCNTR register ****************/
+#define HRTIM_MCNTR_MCNTR ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for HRTIM_MPER register *****************/
+#define HRTIM_MPER_MPER ((uint32_t)0xFFFFFFFF) /*!< Period Value */
+
+/******************* Bit definition for HRTIM_MREP register *****************/
+#define HRTIM_MREP_MREP ((uint32_t)0xFFFFFFFF) /*!<Repetition Value */
+
+/******************* Bit definition for HRTIM_MCMP1R register *****************/
+#define HRTIM_MCMP1R_MCMP1R ((uint32_t)0xFFFFFFFF) /*!<Compare Value */
+
+/******************* Bit definition for HRTIM_MCMP2R register *****************/
+#define HRTIM_MCMP1R_MCMP2R ((uint32_t)0xFFFFFFFF) /*!<Compare Value */
+
+/******************* Bit definition for HRTIM_MCMP3R register *****************/
+#define HRTIM_MCMP1R_MCMP3R ((uint32_t)0xFFFFFFFF) /*!<Compare Value */
+
+/******************* Bit definition for HRTIM_MCMP4R register *****************/
+#define HRTIM_MCMP1R_MCMP4R ((uint32_t)0xFFFFFFFF) /*!<Compare Value */
+
+/******************** Slave control register **********************************/
+#define HRTIM_TIMCR_CK_PSC ((uint32_t)0x00000007) /*!< Slave prescaler mask*/
+#define HRTIM_TIMCR_CK_PSC_0 ((uint32_t)0x00000001) /*!< prescaler bit 0 */
+#define HRTIM_TIMCR_CK_PSC_1 ((uint32_t)0x00000002) /*!< prescaler bit 1 */
+#define HRTIM_TIMCR_CK_PSC_2 ((uint32_t)0x00000004) /*!< prescaler bit 2 */
+
+#define HRTIM_TIMCR_CONT ((uint32_t)0x00000008) /*!< Slave continuous mode */
+#define HRTIM_TIMCR_RETRIG ((uint32_t)0x00000010) /*!< Slave Retrigreable mode */
+#define HRTIM_TIMCR_HALF ((uint32_t)0x00000020) /*!< Slave Half mode */
+#define HRTIM_TIMCR_PSHPLL ((uint32_t)0x00000040) /*!< Slave push-pull mode */
+
+#define HRTIM_TIMCR_SYNCRST ((uint32_t)0x00000400) /*!< Slave synchronization resets */
+#define HRTIM_TIMCR_SYNCSTRT ((uint32_t)0x00000800) /*!< Slave synchronization starts */
+
+#define HRTIM_TIMCR_DELCMP2 ((uint32_t)0x00003000) /*!< Slave delayed compartor 2 mode mask */
+#define HRTIM_TIMCR_DELCMP2_0 ((uint32_t)0x00001000) /*!< Slave delayed compartor 2 bit 0 */
+#define HRTIM_TIMCR_DELCMP2_1 ((uint32_t)0x00002000) /*!< Slave delayed compartor 2 bit 1 */
+#define HRTIM_TIMCR_DELCMP4 ((uint32_t)0x0000C000) /*!< Slave delayed compartor 4 mode mask */
+#define HRTIM_TIMCR_DELCMP4_0 ((uint32_t)0x00004000) /*!< Slave delayed compartor 4 bit 0 */
+#define HRTIM_TIMCR_DELCMP4_1 ((uint32_t)0x00008000) /*!< Slave delayed compartor 4 bit 1 */
+
+#define HRTIM_TIMCR_TREPU ((uint32_t)0x00020000) /*!< Slave repetition update */
+#define HRTIM_TIMCR_TRSTU ((uint32_t)0x00040000) /*!< Slave reset update */
+#define HRTIM_TIMCR_TAU ((uint32_t)0x00080000) /*!< Slave Timer A update reserved for TIM A */
+#define HRTIM_TIMCR_TBU ((uint32_t)0x00100000) /*!< Slave Timer B update reserved for TIM B */
+#define HRTIM_TIMCR_TCU ((uint32_t)0x00200000) /*!< Slave Timer C update reserved for TIM C */
+#define HRTIM_TIMCR_TDU ((uint32_t)0x00400000) /*!< Slave Timer D update reserved for TIM D */
+#define HRTIM_TIMCR_TEU ((uint32_t)0x00800000) /*!< Slave Timer E update reserved for TIM E */
+#define HRTIM_TIMCR_MSTU ((uint32_t)0x01000000) /*!< Master Update */
+
+#define HRTIM_TIMCR_DACSYNC ((uint32_t)0x06000000) /*!< DAC sychronization mask */
+#define HRTIM_TIMCR_DACSYNC_0 ((uint32_t)0x02000000) /*!< DAC sychronization bit 0 */
+#define HRTIM_TIMCR_DACSYNC_1 ((uint32_t)0x04000000) /*!< DAC sychronization bit 1 */
+#define HRTIM_TIMCR_PREEN ((uint32_t)0x08000000) /*!< Slave preload enable */
+
+#define HRTIM_TIMCR_UPDGAT ((uint32_t)0xF0000000) /*!< Slave update gating mask */
+#define HRTIM_TIMCR_UPDGAT_0 ((uint32_t)0x10000000) /*!< Update gating bit 0 */
+#define HRTIM_TIMCR_UPDGAT_1 ((uint32_t)0x20000000) /*!< Update gating bit 1 */
+#define HRTIM_TIMCR_UPDGAT_2 ((uint32_t)0x40000000) /*!< Update gating bit 2 */
+#define HRTIM_TIMCR_UPDGAT_3 ((uint32_t)0x80000000) /*!< Update gating bit 3 */
+
+/******************** Slave Interrupt status register **************************/
+#define HRTIM_TIMISR_CMP1 ((uint32_t)0x00000001) /*!< Slave compare 1 interrupt flag */
+#define HRTIM_TIMISR_CMP2 ((uint32_t)0x00000002) /*!< Slave compare 2 interrupt flag */
+#define HRTIM_TIMISR_CMP3 ((uint32_t)0x00000004) /*!< Slave compare 3 interrupt flag */
+#define HRTIM_TIMISR_CMP4 ((uint32_t)0x00000008) /*!< Slave compare 4 interrupt flag */
+#define HRTIM_TIMISR_REP ((uint32_t)0x00000010) /*!< Slave repetition interrupt flag */
+#define HRTIM_TIMISR_UPD ((uint32_t)0x00000040) /*!< Slave update interrupt flag */
+#define HRTIM_TIMISR_CPT1 ((uint32_t)0x00000080) /*!< Slave capture 1 interrupt flag */
+#define HRTIM_TIMISR_CPT2 ((uint32_t)0x00000100) /*!< Slave capture 2 interrupt flag */
+#define HRTIM_TIMISR_SET1 ((uint32_t)0x00000200) /*!< Slave output 1 set interrupt flag */
+#define HRTIM_TIMISR_RST1 ((uint32_t)0x00000400) /*!< Slave output 1 reset interrupt flag */
+#define HRTIM_TIMISR_SET2 ((uint32_t)0x00000800) /*!< Slave output 2 set interrupt flag */
+#define HRTIM_TIMISR_RST2 ((uint32_t)0x00001000) /*!< Slave output 2 reset interrupt flag */
+#define HRTIM_TIMISR_RST ((uint32_t)0x00002000) /*!< Slave reset interrupt flag */
+#define HRTIM_TIMISR_DLYPRT ((uint32_t)0x00004000) /*!< Slave output 1 delay protection interrupt flag */
+#define HRTIM_TIMISR_CPPSTAT ((uint32_t)0x00010000) /*!< Slave current push-pull flag */
+#define HRTIM_TIMISR_IPPSTAT ((uint32_t)0x00020000) /*!< Slave idle push-pull flag */
+#define HRTIM_TIMISR_O1STAT ((uint32_t)0x00040000) /*!< Slave output 1 state flag */
+#define HRTIM_TIMISR_O2STAT ((uint32_t)0x00080000) /*!< Slave output 2 state flag */
+#define HRTIM_TIMISR_O1CPY ((uint32_t)0x00100000) /*!< Slave output 1 copy flag */
+#define HRTIM_TIMISR_O2CPY ((uint32_t)0x00200000) /*!< Slave output 2 copy flag */
+
+/******************** Slave Interrupt clear register **************************/
+#define HRTIM_TIMICR_CMP1C ((uint32_t)0x00000001) /*!< Slave compare 1 clear flag */
+#define HRTIM_TIMICR_CMP2C ((uint32_t)0x00000002) /*!< Slave compare 2 clear flag */
+#define HRTIM_TIMICR_CMP3C ((uint32_t)0x00000004) /*!< Slave compare 3 clear flag */
+#define HRTIM_TIMICR_CMP4C ((uint32_t)0x00000008) /*!< Slave compare 4 clear flag */
+#define HRTIM_TIMICR_REPC ((uint32_t)0x00000010) /*!< Slave repetition clear flag */
+#define HRTIM_TIMICR_UPDC ((uint32_t)0x00000040) /*!< Slave update clear flag */
+#define HRTIM_TIMICR_CPT1C ((uint32_t)0x00000080) /*!< Slave capture 1 clear flag */
+#define HRTIM_TIMICR_CPT2C ((uint32_t)0x00000100) /*!< Slave capture 2 clear flag */
+#define HRTIM_TIMICR_SET1C ((uint32_t)0x00000200) /*!< Slave output 1 set clear flag */
+#define HRTIM_TIMICR_RST1C ((uint32_t)0x00000400) /*!< Slave output 1 reset clear flag */
+#define HRTIM_TIMICR_SET2C ((uint32_t)0x00000800) /*!< Slave output 2 set clear flag */
+#define HRTIM_TIMICR_RST2C ((uint32_t)0x00001000) /*!< Slave output 2 reset clear flag */
+#define HRTIM_TIMICR_RSTC ((uint32_t)0x00002000) /*!< Slave reset clear flag */
+#define HRTIM_TIMICR_DLYPRT1C ((uint32_t)0x00004000) /*!< Slave output 1 delay protection clear flag */
+#define HRTIM_TIMICR_DLYPRT2C ((uint32_t)0x00008000) /*!< Slave output 2 delay protection clear flag */
+
+/******************** Slave DMA/Interrupt enable register *********************/
+#define HRTIM_TIMDIER_CMP1IE ((uint32_t)0x00000001) /*!< Slave compare 1 interrupt enable */
+#define HRTIM_TIMDIER_CMP2IE ((uint32_t)0x00000002) /*!< Slave compare 2 interrupt enable */
+#define HRTIM_TIMDIER_CMP3IE ((uint32_t)0x00000004) /*!< Slave compare 3 interrupt enable */
+#define HRTIM_TIMDIER_CMP4IE ((uint32_t)0x00000008) /*!< Slave compare 4 interrupt enable */
+#define HRTIM_TIMDIER_REPIE ((uint32_t)0x00000010) /*!< Slave repetition interrupt enable */
+#define HRTIM_TIMDIER_UPDIE ((uint32_t)0x00000040) /*!< Slave update interrupt enable */
+#define HRTIM_TIMDIER_CPT1IE ((uint32_t)0x00000080) /*!< Slave capture 1 interrupt enable */
+#define HRTIM_TIMDIER_CPT2IE ((uint32_t)0x00000100) /*!< Slave capture 2 interrupt enable */
+#define HRTIM_TIMDIER_SET1IE ((uint32_t)0x00000200) /*!< Slave output 1 set interrupt enable */
+#define HRTIM_TIMDIER_RST1IE ((uint32_t)0x00000400) /*!< Slave output 1 reset interrupt enable */
+#define HRTIM_TIMDIER_SET2IE ((uint32_t)0x00000800) /*!< Slave output 2 set interrupt enable */
+#define HRTIM_TIMDIER_RST2IE ((uint32_t)0x00001000) /*!< Slave output 2 reset interrupt enable */
+#define HRTIM_TIMDIER_RSTIE ((uint32_t)0x00002000) /*!< Slave reset interrupt enable */
+#define HRTIM_TIMDIER_DLYPRTIE ((uint32_t)0x00004000) /*!< Slave delay protection interrupt enable */
+
+#define HRTIM_TIMDIER_CMP1DE ((uint32_t)0x00010000) /*!< Slave compare 1 request enable */
+#define HRTIM_TIMDIER_CMP2DE ((uint32_t)0x00020000) /*!< Slave compare 2 request enable */
+#define HRTIM_TIMDIER_CMP3DE ((uint32_t)0x00040000) /*!< Slave compare 3 request enable */
+#define HRTIM_TIMDIER_CMP4DE ((uint32_t)0x00080000) /*!< Slave compare 4 request enable */
+#define HRTIM_TIMDIER_REPDE ((uint32_t)0x00100000) /*!< Slave repetition request enable */
+#define HRTIM_TIMDIER_UPDDE ((uint32_t)0x00400000) /*!< Slave update request enable */
+#define HRTIM_TIMDIER_CPT1DE ((uint32_t)0x00800000) /*!< Slave capture 1 request enable */
+#define HRTIM_TIMDIER_CPT2DE ((uint32_t)0x01000000) /*!< Slave capture 2 request enable */
+#define HRTIM_TIMDIER_SET1DE ((uint32_t)0x02000000) /*!< Slave output 1 set request enable */
+#define HRTIM_TIMDIER_RST1DE ((uint32_t)0x04000000) /*!< Slave output 1 reset request enable */
+#define HRTIM_TIMDIER_SET2DE ((uint32_t)0x08000000) /*!< Slave output 2 set request enable */
+#define HRTIM_TIMDIER_RST2DE ((uint32_t)0x10000000) /*!< Slave output 2 reset request enable */
+#define HRTIM_TIMDIER_RSTDE ((uint32_t)0x20000000) /*!< Slave reset request enable */
+#define HRTIM_TIMDIER_DLYPRTDE ((uint32_t)0x40000000) /*!< Slavedelay protection request enable */
+
+/****************** Bit definition for HRTIM_CNTR register ****************/
+#define HRTIM_CNTR_CNTR ((uint32_t)0xFFFFFFFF) /*!< Counter Value */
+
+/******************* Bit definition for HRTIM_PER register *****************/
+#define HRTIM_PER_PER ((uint32_t)0xFFFFFFFF) /*!< Period Value */
+
+/******************* Bit definition for HRTIM_REP register *****************/
+#define HRTIM_REP_REP ((uint32_t)0xFFFFFFFF) /*!< Repetition Value */
+
+/******************* Bit definition for HRTIM_CMP1R register *****************/
+#define HRTIM_CMP1R_CMP1R ((uint32_t)0xFFFFFFFF) /*!< Compare Value */
+
+/******************* Bit definition for HRTIM_CMP1CR register *****************/
+#define HRTIM_CMP1CR_CMP1CR ((uint32_t)0xFFFFFFFF) /*!< Compare Value */
+
+/******************* Bit definition for HRTIM_CMP2R register *****************/
+#define HRTIM_CMP2R_CMP2R ((uint32_t)0xFFFFFFFF) /*!< Compare Value */
+
+/******************* Bit definition for HRTIM_CMP3R register *****************/
+#define HRTIM_CMP3R_CMP3R ((uint32_t)0xFFFFFFFF) /*!< Compare Value */
+
+/******************* Bit definition for HRTIM_CMP4R register *****************/
+#define HRTIM_CMP4R_CMP4R ((uint32_t)0xFFFFFFFF) /*!< Compare Value */
+
+/******************* Bit definition for HRTIM_CPT1R register ****************/
+#define HRTIM_CPT1R_CPT1R ((uint32_t)0xFFFFFFFF) /*!< Capture Value */
+
+/******************* Bit definition for HRTIM_CPT2R register ****************/
+#define HRTIM_CPT2R_CPT2R ((uint32_t)0xFFFFFFFF) /*!< Capture Value */
+
+/******************** Bit definition for Slave Deadtime register **************/
+#define HRTIM_DTR_DTR ((uint32_t)0x000001FF) /*!< Dead time rising value */
+#define HRTIM_DTR_DTR_0 ((uint32_t)0x00000001) /*!< Dead time rising bit 0 */
+#define HRTIM_DTR_DTR_1 ((uint32_t)0x00000002) /*!< Dead time rising bit 1 */
+#define HRTIM_DTR_DTR_2 ((uint32_t)0x00000004) /*!< Dead time rising bit 2 */
+#define HRTIM_DTR_DTR_3 ((uint32_t)0x00000008) /*!< Dead time rising bit 3 */
+#define HRTIM_DTR_DTR_4 ((uint32_t)0x00000010) /*!< Dead time rising bit 4 */
+#define HRTIM_DTR_DTR_5 ((uint32_t)0x00000020) /*!< Dead time rising bit 5 */
+#define HRTIM_DTR_DTR_6 ((uint32_t)0x00000040) /*!< Dead time rising bit 6 */
+#define HRTIM_DTR_DTR_7 ((uint32_t)0x00000080) /*!< Dead time rising bit 7 */
+#define HRTIM_DTR_DTR_8 ((uint32_t)0x00000100) /*!< Dead time rising bit 8 */
+#define HRTIM_DTR_SDTR ((uint32_t)0x00000200) /*!< Sign dead time rising value */
+#define HRTIM_DTR_DTPRSC ((uint32_t)0x00001C00) /*!< Dead time prescaler */
+#define HRTIM_DTR_DTPRSC_0 ((uint32_t)0x00000400) /*!< Dead time prescaler bit 0 */
+#define HRTIM_DTR_DTPRSC_1 ((uint32_t)0x00000800) /*!< Dead time prescaler bit 1 */
+#define HRTIM_DTR_DTPRSC_2 ((uint32_t)0x00001000) /*!< Dead time prescaler bit 2 */
+#define HRTIM_DTR_DTRSLK ((uint32_t)0x00004000) /*!< Dead time rising sign lock */
+#define HRTIM_DTR_DTRLK ((uint32_t)0x00008000) /*!< Dead time rising lock */
+#define HRTIM_DTR_DTF ((uint32_t)0x01FF0000) /*!< Dead time falling value */
+#define HRTIM_DTR_DTF_0 ((uint32_t)0x00010000) /*!< Dead time falling bit 0 */
+#define HRTIM_DTR_DTF_1 ((uint32_t)0x00020000) /*!< Dead time falling bit 1 */
+#define HRTIM_DTR_DTF_2 ((uint32_t)0x00040000) /*!< Dead time falling bit 2 */
+#define HRTIM_DTR_DTF_3 ((uint32_t)0x00080000) /*!< Dead time falling bit 3 */
+#define HRTIM_DTR_DTF_4 ((uint32_t)0x00100000) /*!< Dead time falling bit 4 */
+#define HRTIM_DTR_DTF_5 ((uint32_t)0x00200000) /*!< Dead time falling bit 5 */
+#define HRTIM_DTR_DTF_6 ((uint32_t)0x00400000) /*!< Dead time falling bit 6 */
+#define HRTIM_DTR_DTF_7 ((uint32_t)0x00800000) /*!< Dead time falling bit 7 */
+#define HRTIM_DTR_DTF_8 ((uint32_t)0x01000000) /*!< Dead time falling bit 8 */
+#define HRTIM_DTR_SDTF ((uint32_t)0x02000000) /*!< Sign dead time falling value */
+#define HRTIM_DTR_DTFSLK ((uint32_t)0x40000000) /*!< Dead time falling sign lock */
+#define HRTIM_DTR_DTFLK ((uint32_t)0x80000000) /*!< Dead time falling lock */
+
+/**** Bit definition for Slave Output 1 set register **************************/
+#define HRTIM_SET1R_SST ((uint32_t)0x00000001) /*!< software set trigger */
+#define HRTIM_SET1R_RESYNC ((uint32_t)0x00000002) /*!< Timer A resynchronization */
+#define HRTIM_SET1R_PER ((uint32_t)0x00000004) /*!< Timer A period */
+#define HRTIM_SET1R_CMP1 ((uint32_t)0x00000008) /*!< Timer A compare 1 */
+#define HRTIM_SET1R_CMP2 ((uint32_t)0x00000010) /*!< Timer A compare 2 */
+#define HRTIM_SET1R_CMP3 ((uint32_t)0x00000020) /*!< Timer A compare 3 */
+#define HRTIM_SET1R_CMP4 ((uint32_t)0x00000040) /*!< Timer A compare 4 */
+
+#define HRTIM_SET1R_MSTPER ((uint32_t)0x00000080) /*!< Master period */
+#define HRTIM_SET1R_MSTCMP1 ((uint32_t)0x00000100) /*!< Master compare 1 */
+#define HRTIM_SET1R_MSTCMP2 ((uint32_t)0x00000200) /*!< Master compare 2 */
+#define HRTIM_SET1R_MSTCMP3 ((uint32_t)0x00000400) /*!< Master compare 3 */
+#define HRTIM_SET1R_MSTCMP4 ((uint32_t)0x00000800) /*!< Master compare 4 */
+
+#define HRTIM_SET1R_TIMEVNT1 ((uint32_t)0x00001000) /*!< Timer event 1 */
+#define HRTIM_SET1R_TIMEVNT2 ((uint32_t)0x00002000) /*!< Timer event 2 */
+#define HRTIM_SET1R_TIMEVNT3 ((uint32_t)0x00004000) /*!< Timer event 3 */
+#define HRTIM_SET1R_TIMEVNT4 ((uint32_t)0x00008000) /*!< Timer event 4 */
+#define HRTIM_SET1R_TIMEVNT5 ((uint32_t)0x00010000) /*!< Timer event 5 */
+#define HRTIM_SET1R_TIMEVNT6 ((uint32_t)0x00020000) /*!< Timer event 6 */
+#define HRTIM_SET1R_TIMEVNT7 ((uint32_t)0x00040000) /*!< Timer event 7 */
+#define HRTIM_SET1R_TIMEVNT8 ((uint32_t)0x00080000) /*!< Timer event 8 */
+#define HRTIM_SET1R_TIMEVNT9 ((uint32_t)0x00100000) /*!< Timer event 9 */
+
+#define HRTIM_SET1R_EXTVNT1 ((uint32_t)0x00200000) /*!< External event 1 */
+#define HRTIM_SET1R_EXTVNT2 ((uint32_t)0x00400000) /*!< External event 2 */
+#define HRTIM_SET1R_EXTVNT3 ((uint32_t)0x00800000) /*!< External event 3 */
+#define HRTIM_SET1R_EXTVNT4 ((uint32_t)0x01000000) /*!< External event 4 */
+#define HRTIM_SET1R_EXTVNT5 ((uint32_t)0x02000000) /*!< External event 5 */
+#define HRTIM_SET1R_EXTVNT6 ((uint32_t)0x04000000) /*!< External event 6 */
+#define HRTIM_SET1R_EXTVNT7 ((uint32_t)0x08000000) /*!< External event 7 */
+#define HRTIM_SET1R_EXTVNT8 ((uint32_t)0x10000000) /*!< External event 8 */
+#define HRTIM_SET1R_EXTVNT9 ((uint32_t)0x20000000) /*!< External event 9 */
+#define HRTIM_SET1R_EXTVNT10 ((uint32_t)0x40000000) /*!< External event 10 */
+
+#define HRTIM_SET1R_UPDATE ((uint32_t)0x80000000) /*!< Register update (transfer preload to active) */
+
+/**** Bit definition for Slave Output 1 reset register ************************/
+#define HRTIM_RST1R_SRT ((uint32_t)0x00000001) /*!< software reset trigger */
+#define HRTIM_RST1R_RESYNC ((uint32_t)0x00000002) /*!< Timer A resynchronization */
+#define HRTIM_RST1R_PER ((uint32_t)0x00000004) /*!< Timer A period */
+#define HRTIM_RST1R_CMP1 ((uint32_t)0x00000008) /*!< Timer A compare 1 */
+#define HRTIM_RST1R_CMP2 ((uint32_t)0x00000010) /*!< Timer A compare 2 */
+#define HRTIM_RST1R_CMP3 ((uint32_t)0x00000020) /*!< Timer A compare 3 */
+#define HRTIM_RST1R_CMP4 ((uint32_t)0x00000040) /*!< Timer A compare 4 */
+
+#define HRTIM_RST1R_MSTPER ((uint32_t)0x00000080) /*!< Master period */
+#define HRTIM_RST1R_MSTCMP1 ((uint32_t)0x00000100) /*!< Master compare 1 */
+#define HRTIM_RST1R_MSTCMP2 ((uint32_t)0x00000200) /*!< Master compare 2 */
+#define HRTIM_RST1R_MSTCMP3 ((uint32_t)0x00000400) /*!< Master compare 3 */
+#define HRTIM_RST1R_MSTCMP4 ((uint32_t)0x00000800) /*!< Master compare 4 */
+
+#define HRTIM_RST1R_TIMEVNT1 ((uint32_t)0x00001000) /*!< Timer event 1 */
+#define HRTIM_RST1R_TIMEVNT2 ((uint32_t)0x00002000) /*!< Timer event 2 */
+#define HRTIM_RST1R_TIMEVNT3 ((uint32_t)0x00004000) /*!< Timer event 3 */
+#define HRTIM_RST1R_TIMEVNT4 ((uint32_t)0x00008000) /*!< Timer event 4 */
+#define HRTIM_RST1R_TIMEVNT5 ((uint32_t)0x00010000) /*!< Timer event 5 */
+#define HRTIM_RST1R_TIMEVNT6 ((uint32_t)0x00020000) /*!< Timer event 6 */
+#define HRTIM_RST1R_TIMEVNT7 ((uint32_t)0x00040000) /*!< Timer event 7 */
+#define HRTIM_RST1R_TIMEVNT8 ((uint32_t)0x00080000) /*!< Timer event 8 */
+#define HRTIM_RST1R_TIMEVNT9 ((uint32_t)0x00100000) /*!< Timer event 9 */
+
+#define HRTIM_RST1R_EXTVNT1 ((uint32_t)0x00200000) /*!< External event 1 */
+#define HRTIM_RST1R_EXTVNT2 ((uint32_t)0x00400000) /*!< External event 2 */
+#define HRTIM_RST1R_EXTVNT3 ((uint32_t)0x00800000) /*!< External event 3 */
+#define HRTIM_RST1R_EXTVNT4 ((uint32_t)0x01000000) /*!< External event 4 */
+#define HRTIM_RST1R_EXTVNT5 ((uint32_t)0x02000000) /*!< External event 5 */
+#define HRTIM_RST1R_EXTVNT6 ((uint32_t)0x04000000) /*!< External event 6 */
+#define HRTIM_RST1R_EXTVNT7 ((uint32_t)0x08000000) /*!< External event 7 */
+#define HRTIM_RST1R_EXTVNT8 ((uint32_t)0x10000000) /*!< External event 8 */
+#define HRTIM_RST1R_EXTVNT9 ((uint32_t)0x20000000) /*!< External event 9 */
+#define HRTIM_RST1R_EXTVNT10 ((uint32_t)0x40000000) /*!< External event 10 */
+
+#define HRTIM_RST1R_UPDATE ((uint32_t)0x80000000) /*!< Register update (transfer preload to active) */
+
+
+/**** Bit definition for Slave Output 2 set register **************************/
+#define HRTIM_SET2R_SST ((uint32_t)0x00000001) /*!< software set trigger */
+#define HRTIM_SET2R_RESYNC ((uint32_t)0x00000002) /*!< Timer A resynchronization */
+#define HRTIM_SET2R_PER ((uint32_t)0x00000004) /*!< Timer A period */
+#define HRTIM_SET2R_CMP1 ((uint32_t)0x00000008) /*!< Timer A compare 1 */
+#define HRTIM_SET2R_CMP2 ((uint32_t)0x00000010) /*!< Timer A compare 2 */
+#define HRTIM_SET2R_CMP3 ((uint32_t)0x00000020) /*!< Timer A compare 3 */
+#define HRTIM_SET2R_CMP4 ((uint32_t)0x00000040) /*!< Timer A compare 4 */
+
+#define HRTIM_SET2R_MSTPER ((uint32_t)0x00000080) /*!< Master period */
+#define HRTIM_SET2R_MSTCMP1 ((uint32_t)0x00000100) /*!< Master compare 1 */
+#define HRTIM_SET2R_MSTCMP2 ((uint32_t)0x00000200) /*!< Master compare 2 */
+#define HRTIM_SET2R_MSTCMP3 ((uint32_t)0x00000400) /*!< Master compare 3 */
+#define HRTIM_SET2R_MSTCMP4 ((uint32_t)0x00000800) /*!< Master compare 4 */
+
+#define HRTIM_SET2R_TIMEVNT1 ((uint32_t)0x00001000) /*!< Timer event 1 */
+#define HRTIM_SET2R_TIMEVNT2 ((uint32_t)0x00002000) /*!< Timer event 2 */
+#define HRTIM_SET2R_TIMEVNT3 ((uint32_t)0x00004000) /*!< Timer event 3 */
+#define HRTIM_SET2R_TIMEVNT4 ((uint32_t)0x00008000) /*!< Timer event 4 */
+#define HRTIM_SET2R_TIMEVNT5 ((uint32_t)0x00010000) /*!< Timer event 5 */
+#define HRTIM_SET2R_TIMEVNT6 ((uint32_t)0x00020000) /*!< Timer event 6 */
+#define HRTIM_SET2R_TIMEVNT7 ((uint32_t)0x00040000) /*!< Timer event 7 */
+#define HRTIM_SET2R_TIMEVNT8 ((uint32_t)0x00080000) /*!< Timer event 8 */
+#define HRTIM_SET2R_TIMEVNT9 ((uint32_t)0x00100000) /*!< Timer event 9 */
+
+#define HRTIM_SET2R_EXTVNT1 ((uint32_t)0x00200000) /*!< External event 1 */
+#define HRTIM_SET2R_EXTVNT2 ((uint32_t)0x00400000) /*!< External event 2 */
+#define HRTIM_SET2R_EXTVNT3 ((uint32_t)0x00800000) /*!< External event 3 */
+#define HRTIM_SET2R_EXTVNT4 ((uint32_t)0x01000000) /*!< External event 4 */
+#define HRTIM_SET2R_EXTVNT5 ((uint32_t)0x02000000) /*!< External event 5 */
+#define HRTIM_SET2R_EXTVNT6 ((uint32_t)0x04000000) /*!< External event 6 */
+#define HRTIM_SET2R_EXTVNT7 ((uint32_t)0x08000000) /*!< External event 7 */
+#define HRTIM_SET2R_EXTVNT8 ((uint32_t)0x10000000) /*!< External event 8 */
+#define HRTIM_SET2R_EXTVNT9 ((uint32_t)0x20000000) /*!< External event 9 */
+#define HRTIM_SET2R_EXTVNT10 ((uint32_t)0x40000000) /*!< External event 10 */
+
+#define HRTIM_SET2R_UPDATE ((uint32_t)0x80000000) /*!< Register update (transfer preload to active) */
+
+/**** Bit definition for Slave Output 2 reset register ************************/
+#define HRTIM_RST2R_SRT ((uint32_t)0x00000001) /*!< software reset trigger */
+#define HRTIM_RST2R_RESYNC ((uint32_t)0x00000002) /*!< Timer A resynchronization */
+#define HRTIM_RST2R_PER ((uint32_t)0x00000004) /*!< Timer A period */
+#define HRTIM_RST2R_CMP1 ((uint32_t)0x00000008) /*!< Timer A compare 1 */
+#define HRTIM_RST2R_CMP2 ((uint32_t)0x00000010) /*!< Timer A compare 2 */
+#define HRTIM_RST2R_CMP3 ((uint32_t)0x00000020) /*!< Timer A compare 3 */
+#define HRTIM_RST2R_CMP4 ((uint32_t)0x00000040) /*!< Timer A compare 4 */
+
+#define HRTIM_RST2R_MSTPER ((uint32_t)0x00000080) /*!< Master period */
+#define HRTIM_RST2R_MSTCMP1 ((uint32_t)0x00000100) /*!< Master compare 1 */
+#define HRTIM_RST2R_MSTCMP2 ((uint32_t)0x00000200) /*!< Master compare 2 */
+#define HRTIM_RST2R_MSTCMP3 ((uint32_t)0x00000400) /*!< Master compare 3 */
+#define HRTIM_RST2R_MSTCMP4 ((uint32_t)0x00000800) /*!< Master compare 4 */
+
+#define HRTIM_RST2R_TIMEVNT1 ((uint32_t)0x00001000) /*!< Timer event 1 */
+#define HRTIM_RST2R_TIMEVNT2 ((uint32_t)0x00002000) /*!< Timer event 2 */
+#define HRTIM_RST2R_TIMEVNT3 ((uint32_t)0x00004000) /*!< Timer event 3 */
+#define HRTIM_RST2R_TIMEVNT4 ((uint32_t)0x00008000) /*!< Timer event 4 */
+#define HRTIM_RST2R_TIMEVNT5 ((uint32_t)0x00010000) /*!< Timer event 5 */
+#define HRTIM_RST2R_TIMEVNT6 ((uint32_t)0x00020000) /*!< Timer event 6 */
+#define HRTIM_RST2R_TIMEVNT7 ((uint32_t)0x00040000) /*!< Timer event 7 */
+#define HRTIM_RST2R_TIMEVNT8 ((uint32_t)0x00080000) /*!< Timer event 8 */
+#define HRTIM_RST2R_TIMEVNT9 ((uint32_t)0x00100000) /*!< Timer event 9 */
+
+#define HRTIM_RST2R_EXTVNT1 ((uint32_t)0x00200000) /*!< External event 1 */
+#define HRTIM_RST2R_EXTVNT2 ((uint32_t)0x00400000) /*!< External event 2 */
+#define HRTIM_RST2R_EXTVNT3 ((uint32_t)0x00800000) /*!< External event 3 */
+#define HRTIM_RST2R_EXTVNT4 ((uint32_t)0x01000000) /*!< External event 4 */
+#define HRTIM_RST2R_EXTVNT5 ((uint32_t)0x02000000) /*!< External event 5 */
+#define HRTIM_RST2R_EXTVNT6 ((uint32_t)0x04000000) /*!< External event 6 */
+#define HRTIM_RST2R_EXTVNT7 ((uint32_t)0x08000000) /*!< External event 7 */
+#define HRTIM_RST2R_EXTVNT8 ((uint32_t)0x10000000) /*!< External event 8 */
+#define HRTIM_RST2R_EXTVNT9 ((uint32_t)0x20000000) /*!< External event 9 */
+#define HRTIM_RST2R_EXTVNT10 ((uint32_t)0x40000000) /*!< External event 10 */
+
+#define HRTIM_RST2R_UPDATE ((uint32_t)0x80000000) /*!< Register update (transfer preload to active) */
+
+/**** Bit definition for Slave external event filtering register 1 ***********/
+#define HRTIM_EEFR1_EE1LTCH ((uint32_t)0x00000001) /*!< External Event 1 latch */
+#define HRTIM_EEFR1_EE1FLTR ((uint32_t)0x0000001E) /*!< External Event 1 filter mask */
+#define HRTIM_EEFR1_EE1FLTR_0 ((uint32_t)0x00000002) /*!< External Event 1 bit 0 */
+#define HRTIM_EEFR1_EE1FLTR_1 ((uint32_t)0x00000004) /*!< External Event 1 bit 1*/
+#define HRTIM_EEFR1_EE1FLTR_2 ((uint32_t)0x00000008) /*!< External Event 1 bit 2 */
+#define HRTIM_EEFR1_EE1FLTR_3 ((uint32_t)0x00000010) /*!< External Event 1 bit 3 */
+
+#define HRTIM_EEFR1_EE2LTCH ((uint32_t)0x00000040) /*!< External Event 2 latch */
+#define HRTIM_EEFR1_EE2FLTR ((uint32_t)0x00000780) /*!< External Event 2 filter mask */
+#define HRTIM_EEFR1_EE2FLTR_0 ((uint32_t)0x00000080) /*!< External Event 2 bit 0 */
+#define HRTIM_EEFR1_EE2FLTR_1 ((uint32_t)0x00000100) /*!< External Event 2 bit 1*/
+#define HRTIM_EEFR1_EE2FLTR_2 ((uint32_t)0x00000200) /*!< External Event 2 bit 2 */
+#define HRTIM_EEFR1_EE2FLTR_3 ((uint32_t)0x00000400) /*!< External Event 2 bit 3 */
+
+#define HRTIM_EEFR1_EE3LTCH ((uint32_t)0x00001000) /*!< External Event 3 latch */
+#define HRTIM_EEFR1_EE3FLTR ((uint32_t)0x0001E000) /*!< External Event 3 filter mask */
+#define HRTIM_EEFR1_EE3FLTR_0 ((uint32_t)0x00002000) /*!< External Event 3 bit 0 */
+#define HRTIM_EEFR1_EE3FLTR_1 ((uint32_t)0x00004000) /*!< External Event 3 bit 1*/
+#define HRTIM_EEFR1_EE3FLTR_2 ((uint32_t)0x00008000) /*!< External Event 3 bit 2 */
+#define HRTIM_EEFR1_EE3FLTR_3 ((uint32_t)0x00010000) /*!< External Event 3 bit 3 */
+
+#define HRTIM_EEFR1_EE4LTCH ((uint32_t)0x00040000) /*!< External Event 4 latch */
+#define HRTIM_EEFR1_EE4FLTR ((uint32_t)0x00780000) /*!< External Event 4 filter mask */
+#define HRTIM_EEFR1_EE4FLTR_0 ((uint32_t)0x00080000) /*!< External Event 4 bit 0 */
+#define HRTIM_EEFR1_EE4FLTR_1 ((uint32_t)0x00100000) /*!< External Event 4 bit 1*/
+#define HRTIM_EEFR1_EE4FLTR_2 ((uint32_t)0x00200000) /*!< External Event 4 bit 2 */
+#define HRTIM_EEFR1_EE4FLTR_3 ((uint32_t)0x00400000) /*!< External Event 4 bit 3 */
+
+#define HRTIM_EEFR1_EE5LTCH ((uint32_t)0x01000000) /*!< External Event 5 latch */
+#define HRTIM_EEFR1_EE5FLTR ((uint32_t)0x1E000000) /*!< External Event 5 filter mask */
+#define HRTIM_EEFR1_EE5FLTR_0 ((uint32_t)0x02000000) /*!< External Event 5 bit 0 */
+#define HRTIM_EEFR1_EE5FLTR_1 ((uint32_t)0x04000000) /*!< External Event 5 bit 1*/
+#define HRTIM_EEFR1_EE5FLTR_2 ((uint32_t)0x08000000) /*!< External Event 5 bit 2 */
+#define HRTIM_EEFR1_EE5FLTR_3 ((uint32_t)0x10000000) /*!< External Event 5 bit 3 */
+
+/**** Bit definition for Slave external event filtering register 2 ***********/
+#define HRTIM_EEFR2_EE6LTCH ((uint32_t)0x00000001) /*!< External Event 6 latch */
+#define HRTIM_EEFR2_EE6FLTR ((uint32_t)0x0000001E) /*!< External Event 6 filter mask */
+#define HRTIM_EEFR2_EE6FLTR_0 ((uint32_t)0x00000002) /*!< External Event 6 bit 0 */
+#define HRTIM_EEFR2_EE6FLTR_1 ((uint32_t)0x00000004) /*!< External Event 6 bit 1*/
+#define HRTIM_EEFR2_EE6FLTR_2 ((uint32_t)0x00000008) /*!< External Event 6 bit 2 */
+#define HRTIM_EEFR2_EE6FLTR_3 ((uint32_t)0x00000010) /*!< External Event 6 bit 3 */
+
+#define HRTIM_EEFR2_EE7LTCH ((uint32_t)0x00000040) /*!< External Event 7 latch */
+#define HRTIM_EEFR2_EE7FLTR ((uint32_t)0x00000780) /*!< External Event 7 filter mask */
+#define HRTIM_EEFR2_EE7FLTR_0 ((uint32_t)0x00000080) /*!< External Event 7 bit 0 */
+#define HRTIM_EEFR2_EE7FLTR_1 ((uint32_t)0x00000100) /*!< External Event 7 bit 1*/
+#define HRTIM_EEFR2_EE7FLTR_2 ((uint32_t)0x00000200) /*!< External Event 7 bit 2 */
+#define HRTIM_EEFR2_EE7FLTR_3 ((uint32_t)0x00000400) /*!< External Event 7 bit 3 */
+
+#define HRTIM_EEFR2_EE8LTCH ((uint32_t)0x00001000) /*!< External Event 8 latch */
+#define HRTIM_EEFR2_EE8FLTR ((uint32_t)0x0001E000) /*!< External Event 8 filter mask */
+#define HRTIM_EEFR2_EE8FLTR_0 ((uint32_t)0x00002000) /*!< External Event 8 bit 0 */
+#define HRTIM_EEFR2_EE8FLTR_1 ((uint32_t)0x00004000) /*!< External Event 8 bit 1*/
+#define HRTIM_EEFR2_EE8FLTR_2 ((uint32_t)0x00008000) /*!< External Event 8 bit 2 */
+#define HRTIM_EEFR2_EE8FLTR_3 ((uint32_t)0x00010000) /*!< External Event 8 bit 3 */
+
+#define HRTIM_EEFR2_EE9LTCH ((uint32_t)0x00040000) /*!< External Event 9 latch */
+#define HRTIM_EEFR2_EE9FLTR ((uint32_t)0x00780000) /*!< External Event 9 filter mask */
+#define HRTIM_EEFR2_EE9FLTR_0 ((uint32_t)0x00080000) /*!< External Event 9 bit 0 */
+#define HRTIM_EEFR2_EE9FLTR_1 ((uint32_t)0x00100000) /*!< External Event 9 bit 1*/
+#define HRTIM_EEFR2_EE9FLTR_2 ((uint32_t)0x00200000) /*!< External Event 9 bit 2 */
+#define HRTIM_EEFR2_EE9FLTR_3 ((uint32_t)0x00400000) /*!< External Event 9 bit 3 */
+
+#define HRTIM_EEFR2_EE10LTCH ((uint32_t)0x01000000) /*!< External Event 10 latch */
+#define HRTIM_EEFR2_EE10FLTR ((uint32_t)0x1E000000) /*!< External Event 10 filter mask */
+#define HRTIM_EEFR2_EE10FLTR_0 ((uint32_t)0x02000000) /*!< External Event 10 bit 0 */
+#define HRTIM_EEFR2_EE10FLTR_1 ((uint32_t)0x04000000) /*!< External Event 10 bit 1*/
+#define HRTIM_EEFR2_EE10FLTR_2 ((uint32_t)0x08000000) /*!< External Event 10 bit 2 */
+#define HRTIM_EEFR2_EE10FLTR_3 ((uint32_t)0x10000000) /*!< External Event 10 bit 3 */
+
+/**** Bit definition for Slave Timer reset register ***************************/
+#define HRTIM_RSTR_UPDATE ((uint32_t)0x00000002) /*!< Timer update */
+#define HRTIM_RSTR_CMP2 ((uint32_t)0x00000004) /*!< Timer compare2 */
+#define HRTIM_RSTR_CMP4 ((uint32_t)0x00000008) /*!< Timer compare4 */
+
+#define HRTIM_RSTR_MSTPER ((uint32_t)0x00000010) /*!< Master period */
+#define HRTIM_RSTR_MSTCMP1 ((uint32_t)0x00000020) /*!< Master compare1 */
+#define HRTIM_RSTR_MSTCMP2 ((uint32_t)0x00000040) /*!< Master compare2 */
+#define HRTIM_RSTR_MSTCMP3 ((uint32_t)0x00000080) /*!< Master compare3 */
+#define HRTIM_RSTR_MSTCMP4 ((uint32_t)0x00000100) /*!< Master compare4 */
+
+#define HRTIM_RSTR_EXTEVNT1 ((uint32_t)0x00000200) /*!< External event 1 */
+#define HRTIM_RSTR_EXTEVNT2 ((uint32_t)0x00000400) /*!< External event 2 */
+#define HRTIM_RSTR_EXTEVNT3 ((uint32_t)0x00000800) /*!< External event 3 */
+#define HRTIM_RSTR_EXTEVNT4 ((uint32_t)0x00001000) /*!< External event 4 */
+#define HRTIM_RSTR_EXTEVNT5 ((uint32_t)0x00002000) /*!< External event 5 */
+#define HRTIM_RSTR_EXTEVNT6 ((uint32_t)0x00004000) /*!< External event 6 */
+#define HRTIM_RSTR_EXTEVNT7 ((uint32_t)0x00008000) /*!< External event 7 */
+#define HRTIM_RSTR_EXTEVNT8 ((uint32_t)0x00010000) /*!< External event 8 */
+#define HRTIM_RSTR_EXTEVNT9 ((uint32_t)0x00020000) /*!< External event 9 */
+#define HRTIM_RSTR_EXTEVNT10 ((uint32_t)0x00040000) /*!< External event 10 */
+
+#define HRTIM_RSTR_TIMBCMP1 ((uint32_t)0x00080000) /*!< Timer B compare 1 */
+#define HRTIM_RSTR_TIMBCMP2 ((uint32_t)0x00100000) /*!< Timer B compare 2 */
+#define HRTIM_RSTR_TIMBCMP4 ((uint32_t)0x00200000) /*!< Timer B compare 4 */
+
+#define HRTIM_RSTR_TIMCCMP1 ((uint32_t)0x00400000) /*!< Timer C compare 1 */
+#define HRTIM_RSTR_TIMCCMP2 ((uint32_t)0x00800000) /*!< Timer C compare 2 */
+#define HRTIM_RSTR_TIMCCMP4 ((uint32_t)0x01000000) /*!< Timer C compare 4 */
+
+#define HRTIM_RSTR_TIMDCMP1 ((uint32_t)0x02000000) /*!< Timer D compare 1 */
+#define HRTIM_RSTR_TIMDCMP2 ((uint32_t)0x04000000) /*!< Timer D compare 2 */
+#define HRTIM_RSTR_TIMDCMP4 ((uint32_t)0x08000000) /*!< Timer D compare 4 */
+
+#define HRTIM_RSTR_TIMECMP1 ((uint32_t)0x10000000) /*!< Timer E compare 1 */
+#define HRTIM_RSTR_TIMECMP2 ((uint32_t)0x20000000) /*!< Timer E compare 2 */
+#define HRTIM_RSTR_TIMECMP4 ((uint32_t)0x40000000) /*!< Timer E compare 4 */
+
+/**** Bit definition for Slave Timer Chopper register *************************/
+#define HRTIM_CHPR_CARFRQ ((uint32_t)0x0000000F) /*!< Timer carrier frequency value */
+#define HRTIM_CHPR_CARFRQ_0 ((uint32_t)0x00000001) /*!< Timer carrier frequency value bit 0 */
+#define HRTIM_CHPR_CARFRQ_1 ((uint32_t)0x00000002) /*!< Timer carrier frequency value bit 1 */
+#define HRTIM_CHPR_CARFRQ_2 ((uint32_t)0x00000004) /*!< Timer carrier frequency value bit 2 */
+#define HRTIM_CHPR_CARFRQ_3 ((uint32_t)0x00000008) /*!< Timer carrier frequency value bit 3 */
+
+#define HRTIM_CHPR_CARDTY ((uint32_t)0x00000070) /*!< Timer chopper duty cycle value */
+#define HRTIM_CHPR_CARDTY_0 ((uint32_t)0x00000010) /*!< Timer chopper duty cycle value bit 0 */
+#define HRTIM_CHPR_CARDTY_1 ((uint32_t)0x00000020) /*!< Timer chopper duty cycle value bit 1 */
+#define HRTIM_CHPR_CARDTY_2 ((uint32_t)0x00000040) /*!< Timer chopper duty cycle value bit 2 */
+
+#define HRTIM_CHPR_STRPW ((uint32_t)0x00000780) /*!< Timer start pulse width value */
+#define HRTIM_CHPR_STRPW_0 ((uint32_t)0x00000080) /*!< Timer start pulse width value bit 0 */
+#define HRTIM_CHPR_STRPW_1 ((uint32_t)0x00000100) /*!< Timer start pulse width value bit 1 */
+#define HRTIM_CHPR_STRPW_2 ((uint32_t)0x00000200) /*!< Timer start pulse width value bit 2 */
+#define HRTIM_CHPR_STRPW_3 ((uint32_t)0x00000400) /*!< Timer start pulse width value bit 3 */
+
+/**** Bit definition for Slave Timer Capture 1 control register ***************/
+#define HRTIM_CPT1CR_SWCPT ((uint32_t)0x00000001) /*!< Software capture */
+#define HRTIM_CPT1CR_UPDCPT ((uint32_t)0x00000002) /*!< Update capture */
+#define HRTIM_CPT1CR_EXEV1CPT ((uint32_t)0x00000004) /*!< External event 1 capture */
+#define HRTIM_CPT1CR_EXEV2CPT ((uint32_t)0x00000008) /*!< External event 2 capture */
+#define HRTIM_CPT1CR_EXEV3CPT ((uint32_t)0x00000010) /*!< External event 3 capture */
+#define HRTIM_CPT1CR_EXEV4CPT ((uint32_t)0x00000020) /*!< External event 4 capture */
+#define HRTIM_CPT1CR_EXEV5CPT ((uint32_t)0x00000040) /*!< External event 5 capture */
+#define HRTIM_CPT1CR_EXEV6CPT ((uint32_t)0x00000080) /*!< External event 6 capture */
+#define HRTIM_CPT1CR_EXEV7CPT ((uint32_t)0x00000100) /*!< External event 7 capture */
+#define HRTIM_CPT1CR_EXEV8CPT ((uint32_t)0x00000200) /*!< External event 8 capture */
+#define HRTIM_CPT1CR_EXEV9CPT ((uint32_t)0x00000400) /*!< External event 9 capture */
+#define HRTIM_CPT1CR_EXEV10CPT ((uint32_t)0x00000800) /*!< External event 10 capture */
+
+#define HRTIM_CPT1CR_TA1SET ((uint32_t)0x00001000) /*!< Timer A output 1 set */
+#define HRTIM_CPT1CR_TA1RST ((uint32_t)0x00002000) /*!< Timer A output 1 reset */
+#define HRTIM_CPT1CR_TIMACMP1 ((uint32_t)0x00004000) /*!< Timer A compare 1 */
+#define HRTIM_CPT1CR_TIMACMP2 ((uint32_t)0x00008000) /*!< Timer A compare 2 */
+
+#define HRTIM_CPT1CR_TB1SET ((uint32_t)0x00010000) /*!< Timer B output 1 set */
+#define HRTIM_CPT1CR_TB1RST ((uint32_t)0x00020000) /*!< Timer B output 1 reset */
+#define HRTIM_CPT1CR_TIMBCMP1 ((uint32_t)0x00040000) /*!< Timer B compare 1 */
+#define HRTIM_CPT1CR_TIMBCMP2 ((uint32_t)0x00080000) /*!< Timer B compare 2 */
+
+#define HRTIM_CPT1CR_TC1SET ((uint32_t)0x00100000) /*!< Timer C output 1 set */
+#define HRTIM_CPT1CR_TC1RST ((uint32_t)0x00200000) /*!< Timer C output 1 reset */
+#define HRTIM_CPT1CR_TIMCCMP1 ((uint32_t)0x00400000) /*!< Timer C compare 1 */
+#define HRTIM_CPT1CR_TIMCCMP2 ((uint32_t)0x00800000) /*!< Timer C compare 2 */
+
+#define HRTIM_CPT1CR_TD1SET ((uint32_t)0x01000000) /*!< Timer D output 1 set */
+#define HRTIM_CPT1CR_TD1RST ((uint32_t)0x02000000) /*!< Timer D output 1 reset */
+#define HRTIM_CPT1CR_TIMDCMP1 ((uint32_t)0x04000000) /*!< Timer D compare 1 */
+#define HRTIM_CPT1CR_TIMDCMP2 ((uint32_t)0x08000000) /*!< Timer D compare 2 */
+
+#define HRTIM_CPT1CR_TE1SET ((uint32_t)0x10000000) /*!< Timer E output 1 set */
+#define HRTIM_CPT1CR_TE1RST ((uint32_t)0x20000000) /*!< Timer E output 1 reset */
+#define HRTIM_CPT1CR_TIMECMP1 ((uint32_t)0x40000000) /*!< Timer E compare 1 */
+#define HRTIM_CPT1CR_TIMECMP2 ((uint32_t)0x80000000) /*!< Timer E compare 2 */
+
+/**** Bit definition for Slave Timer Capture 2 control register ***************/
+#define HRTIM_CPT2CR_SWCPT ((uint32_t)0x00000001) /*!< Software capture */
+#define HRTIM_CPT2CR_UPDCPT ((uint32_t)0x00000002) /*!< Update capture */
+#define HRTIM_CPT2CR_EXEV1CPT ((uint32_t)0x00000004) /*!< External event 1 capture */
+#define HRTIM_CPT2CR_EXEV2CPT ((uint32_t)0x00000008) /*!< External event 2 capture */
+#define HRTIM_CPT2CR_EXEV3CPT ((uint32_t)0x00000010) /*!< External event 3 capture */
+#define HRTIM_CPT2CR_EXEV4CPT ((uint32_t)0x00000020) /*!< External event 4 capture */
+#define HRTIM_CPT2CR_EXEV5CPT ((uint32_t)0x00000040) /*!< External event 5 capture */
+#define HRTIM_CPT2CR_EXEV6CPT ((uint32_t)0x00000080) /*!< External event 6 capture */
+#define HRTIM_CPT2CR_EXEV7CPT ((uint32_t)0x00000100) /*!< External event 7 capture */
+#define HRTIM_CPT2CR_EXEV8CPT ((uint32_t)0x00000200) /*!< External event 8 capture */
+#define HRTIM_CPT2CR_EXEV9CPT ((uint32_t)0x00000400) /*!< External event 9 capture */
+#define HRTIM_CPT2CR_EXEV10CPT ((uint32_t)0x00000800) /*!< External event 10 capture */
+
+#define HRTIM_CPT2CR_TA1SET ((uint32_t)0x00001000) /*!< Timer A output 1 set */
+#define HRTIM_CPT2CR_TA1RST ((uint32_t)0x00002000) /*!< Timer A output 1 reset */
+#define HRTIM_CPT2CR_TIMACMP1 ((uint32_t)0x00004000) /*!< Timer A compare 1 */
+#define HRTIM_CPT2CR_TIMACMP2 ((uint32_t)0x00008000) /*!< Timer A compare 2 */
+
+#define HRTIM_CPT2CR_TB1SET ((uint32_t)0x00010000) /*!< Timer B output 1 set */
+#define HRTIM_CPT2CR_TB1RST ((uint32_t)0x00020000) /*!< Timer B output 1 reset */
+#define HRTIM_CPT2CR_TIMBCMP1 ((uint32_t)0x00040000) /*!< Timer B compare 1 */
+#define HRTIM_CPT2CR_TIMBCMP2 ((uint32_t)0x00080000) /*!< Timer B compare 2 */
+
+#define HRTIM_CPT2CR_TC1SET ((uint32_t)0x00100000) /*!< Timer C output 1 set */
+#define HRTIM_CPT2CR_TC1RST ((uint32_t)0x00200000) /*!< Timer C output 1 reset */
+#define HRTIM_CPT2CR_TIMCCMP1 ((uint32_t)0x00400000) /*!< Timer C compare 1 */
+#define HRTIM_CPT2CR_TIMCCMP2 ((uint32_t)0x00800000) /*!< Timer C compare 2 */
+
+#define HRTIM_CPT2CR_TD1SET ((uint32_t)0x01000000) /*!< Timer D output 1 set */
+#define HRTIM_CPT2CR_TD1RST ((uint32_t)0x02000000) /*!< Timer D output 1 reset */
+#define HRTIM_CPT2CR_TIMDCMP1 ((uint32_t)0x04000000) /*!< Timer D compare 1 */
+#define HRTIM_CPT2CR_TIMDCMP2 ((uint32_t)0x08000000) /*!< Timer D compare 2 */
+
+#define HRTIM_CPT2CR_TE1SET ((uint32_t)0x10000000) /*!< Timer E output 1 set */
+#define HRTIM_CPT2CR_TE1RST ((uint32_t)0x20000000) /*!< Timer E output 1 reset */
+#define HRTIM_CPT2CR_TIMECMP1 ((uint32_t)0x40000000) /*!< Timer E compare 1 */
+#define HRTIM_CPT2CR_TIMECMP2 ((uint32_t)0x80000000) /*!< Timer E compare 2 */
+
+/**** Bit definition for Slave Timer Output register **************************/
+#define HRTIM_OUTR_POL1 ((uint32_t)0x00000002) /*!< Slave output 1 polarity */
+#define HRTIM_OUTR_IDLM1 ((uint32_t)0x00000004) /*!< Slave output 1 idle mode */
+#define HRTIM_OUTR_IDLES1 ((uint32_t)0x00000008) /*!< Slave output 1 idle state */
+#define HRTIM_OUTR_FAULT1 ((uint32_t)0x00000030) /*!< Slave output 1 fault state */
+#define HRTIM_OUTR_FAULT1_0 ((uint32_t)0x00000010) /*!< Slave output 1 fault state bit 0 */
+#define HRTIM_OUTR_FAULT1_1 ((uint32_t)0x00000020) /*!< Slave output 1 fault state bit 1 */
+#define HRTIM_OUTR_CHP1 ((uint32_t)0x00000040) /*!< Slave output 1 chopper enable */
+#define HRTIM_OUTR_DIDL1 ((uint32_t)0x00000080) /*!< Slave output 1 dead time idle */
+
+#define HRTIM_OUTR_DTEN ((uint32_t)0x00000100) /*!< Slave output deadtime enable */
+#define HRTIM_OUTR_DLYPRTEN ((uint32_t)0x00000200) /*!< Slave output delay protection enable */
+#define HRTIM_OUTR_DLYPRT ((uint32_t)0x00001C00) /*!< Slave output delay protection */
+#define HRTIM_OUTR_DLYPRT_0 ((uint32_t)0x00000400) /*!< Slave output delay protection bit 0 */
+#define HRTIM_OUTR_DLYPRT_1 ((uint32_t)0x00000800) /*!< Slave output delay protection bit 1 */
+#define HRTIM_OUTR_DLYPRT_2 ((uint32_t)0x00001000) /*!< Slave output delay protection bit 2 */
+
+#define HRTIM_OUTR_POL2 ((uint32_t)0x00020000) /*!< Slave output 2 polarity */
+#define HRTIM_OUTR_IDLM2 ((uint32_t)0x00040000) /*!< Slave output 2 idle mode */
+#define HRTIM_OUTR_IDLES2 ((uint32_t)0x00080000) /*!< Slave output 2 idle state */
+#define HRTIM_OUTR_FAULT2 ((uint32_t)0x00300000) /*!< Slave output 2 fault state */
+#define HRTIM_OUTR_FAULT2_0 ((uint32_t)0x00100000) /*!< Slave output 2 fault state bit 0 */
+#define HRTIM_OUTR_FAULT2_1 ((uint32_t)0x00200000) /*!< Slave output 2 fault state bit 1 */
+#define HRTIM_OUTR_CHP2 ((uint32_t)0x00400000) /*!< Slave output 2 chopper enable */
+#define HRTIM_OUTR_DIDL2 ((uint32_t)0x00800000) /*!< Slave output 2 dead time idle */
+
+/**** Bit definition for Slave Timer Fault register ***************************/
+#define HRTIM_FLTR_FLT1EN ((uint32_t)0x00000001) /*!< Fault 1 enable */
+#define HRTIM_FLTR_FLT2EN ((uint32_t)0x00000002) /*!< Fault 2 enable */
+#define HRTIM_FLTR_FLT3EN ((uint32_t)0x00000004) /*!< Fault 3 enable */
+#define HRTIM_FLTR_FLT4EN ((uint32_t)0x00000008) /*!< Fault 4 enable */
+#define HRTIM_FLTR_FLT5EN ((uint32_t)0x00000010) /*!< Fault 5 enable */
+#define HRTIM_FLTR_FLTLCK ((uint32_t)0x80000000) /*!< Fault sources lock */
+
+/**** Bit definition for Common HRTIM Timer control register 1 ****************/
+#define HRTIM_CR1_MUDIS ((uint32_t)0x00000001) /*!< Master update disable*/
+#define HRTIM_CR1_TAUDIS ((uint32_t)0x00000002) /*!< Timer A update disable*/
+#define HRTIM_CR1_TBUDIS ((uint32_t)0x00000004) /*!< Timer B update disable*/
+#define HRTIM_CR1_TCUDIS ((uint32_t)0x00000008) /*!< Timer C update disable*/
+#define HRTIM_CR1_TDUDIS ((uint32_t)0x00000010) /*!< Timer D update disable*/
+#define HRTIM_CR1_TEUDIS ((uint32_t)0x00000020) /*!< Timer E update disable*/
+#define HRTIM_CR1_ADC1USRC ((uint32_t)0x00070000) /*!< ADC Trigger 1 update source */
+#define HRTIM_CR1_ADC1USRC_0 ((uint32_t)0x00010000) /*!< ADC Trigger 1 update source bit 0 */
+#define HRTIM_CR1_ADC1USRC_1 ((uint32_t)0x00020000) /*!< ADC Trigger 1 update source bit 1 */
+#define HRTIM_CR1_ADC1USRC_2 ((uint32_t)0x00040000) /*!< ADC Trigger 1 update source bit 2 */
+#define HRTIM_CR1_ADC2USRC ((uint32_t)0x00380000) /*!< ADC Trigger 2 update source */
+#define HRTIM_CR1_ADC2USRC_0 ((uint32_t)0x00080000) /*!< ADC Trigger 2 update source bit 0 */
+#define HRTIM_CR1_ADC2USRC_1 ((uint32_t)0x00100000) /*!< ADC Trigger 2 update source bit 1 */
+#define HRTIM_CR1_ADC2USRC_2 ((uint32_t)0x00200000) /*!< ADC Trigger 2 update source bit 2 */
+#define HRTIM_CR1_ADC3USRC ((uint32_t)0x01C00000) /*!< ADC Trigger 3 update source */
+#define HRTIM_CR1_ADC3USRC_0 ((uint32_t)0x00400000) /*!< ADC Trigger 3 update source bit 0 */
+#define HRTIM_CR1_ADC3USRC_1 ((uint32_t)0x00800000) /*!< ADC Trigger 3 update source bit 1 */
+#define HRTIM_CR1_ADC3USRC_2 ((uint32_t)0x01000000) /*!< ADC Trigger 3 update source bit 2 */
+#define HRTIM_CR1_ADC4USRC ((uint32_t)0x0E000000) /*!< ADC Trigger 4 update source */
+#define HRTIM_CR1_ADC4USRC_0 ((uint32_t)0x02000000) /*!< ADC Trigger 4 update source bit 0 */
+#define HRTIM_CR1_ADC4USRC_1 ((uint32_t)0x04000000) /*!< ADC Trigger 4 update source bit 1 */
+#define HRTIM_CR1_ADC4USRC_2 ((uint32_t)0x0800000) /*!< ADC Trigger 4 update source bit 2 */
+
+/**** Bit definition for Common HRTIM Timer control register 2 ****************/
+#define HRTIM_CR2_MSWU ((uint32_t)0x00000001) /*!< Master software update */
+#define HRTIM_CR2_TASWU ((uint32_t)0x00000002) /*!< Timer A software update */
+#define HRTIM_CR2_TBSWU ((uint32_t)0x00000004) /*!< Timer B software update */
+#define HRTIM_CR2_TCSWU ((uint32_t)0x00000008) /*!< Timer C software update */
+#define HRTIM_CR2_TDSWU ((uint32_t)0x00000010) /*!< Timer D software update */
+#define HRTIM_CR2_TESWU ((uint32_t)0x00000020) /*!< Timer E software update */
+#define HRTIM_CR2_MRST ((uint32_t)0x00000100) /*!< Master count software reset */
+#define HRTIM_CR2_TARST ((uint32_t)0x00000200) /*!< Timer A count software reset */
+#define HRTIM_CR2_TBRST ((uint32_t)0x00000400) /*!< Timer B count software reset */
+#define HRTIM_CR2_TCRST ((uint32_t)0x00000800) /*!< Timer C count software reset */
+#define HRTIM_CR2_TDRST ((uint32_t)0x00001000) /*!< Timer D count software reset */
+#define HRTIM_CR2_TERST ((uint32_t)0x00002000) /*!< Timer E count software reset */
+
+/**** Bit definition for Common HRTIM Timer interrupt status register *********/
+#define HRTIM_ISR_FLT1 ((uint32_t)0x00000001) /*!< Fault 1 interrupt flag */
+#define HRTIM_ISR_FLT2 ((uint32_t)0x00000002) /*!< Fault 2 interrupt flag */
+#define HRTIM_ISR_FLT3 ((uint32_t)0x00000004) /*!< Fault 3 interrupt flag */
+#define HRTIM_ISR_FLT4 ((uint32_t)0x00000008) /*!< Fault 4 interrupt flag */
+#define HRTIM_ISR_FLT5 ((uint32_t)0x00000010) /*!< Fault 5 interrupt flag */
+#define HRTIM_ISR_SYSFLT ((uint32_t)0x00000020) /*!< System Fault interrupt flag */
+#define HRTIM_ISR_DLLRDY ((uint32_t)0x00010000) /*!< DLL ready interrupt flag */
+#define HRTIM_ISR_BMPER ((uint32_t)0x00020000) /*!< Burst mode period interrupt flag */
+
+/**** Bit definition for Common HRTIM Timer interrupt clear register **********/
+#define HRTIM_ICR_FLT1C ((uint32_t)0x00000001) /*!< Fault 1 interrupt flag clear */
+#define HRTIM_ICR_FLT2C ((uint32_t)0x00000002) /*!< Fault 2 interrupt flag clear */
+#define HRTIM_ICR_FLT3C ((uint32_t)0x00000004) /*!< Fault 3 interrupt flag clear */
+#define HRTIM_ICR_FLT4C ((uint32_t)0x00000008) /*!< Fault 4 interrupt flag clear */
+#define HRTIM_ICR_FLT5C ((uint32_t)0x00000010) /*!< Fault 5 interrupt flag clear */
+#define HRTIM_ICR_SYSFLTC ((uint32_t)0x00000020) /*!< System Fault interrupt flag clear */
+#define HRTIM_ICR_DLLRDYC ((uint32_t)0x00010000) /*!< DLL ready interrupt flag clear */
+#define HRTIM_ICR_BMPERC ((uint32_t)0x00020000) /*!< Burst mode period interrupt flag clear */
+
+/**** Bit definition for Common HRTIM Timer interrupt enable register *********/
+#define HRTIM_IER_FLT1 ((uint32_t)0x00000001) /*!< Fault 1 interrupt enable */
+#define HRTIM_IER_FLT2 ((uint32_t)0x00000002) /*!< Fault 2 interrupt enable */
+#define HRTIM_IER_FLT3 ((uint32_t)0x00000004) /*!< Fault 3 interrupt enable */
+#define HRTIM_IER_FLT4 ((uint32_t)0x00000008) /*!< Fault 4 interrupt enable */
+#define HRTIM_IER_FLT5 ((uint32_t)0x00000010) /*!< Fault 5 interrupt enable */
+#define HRTIM_IER_SYSFLT ((uint32_t)0x00000020) /*!< System Fault interrupt enable */
+#define HRTIM_IER_DLLRDY ((uint32_t)0x00010000) /*!< DLL ready interrupt enable */
+#define HRTIM_IER_BMPER ((uint32_t)0x00020000) /*!< Burst mode period interrupt enable */
+
+/**** Bit definition for Common HRTIM Timer output enable register ************/
+#define HRTIM_OENR_TA1OEN ((uint32_t)0x00000001) /*!< Timer A Output 1 enable */
+#define HRTIM_OENR_TA2OEN ((uint32_t)0x00000002) /*!< Timer A Output 2 enable */
+#define HRTIM_OENR_TB1OEN ((uint32_t)0x00000004) /*!< Timer B Output 1 enable */
+#define HRTIM_OENR_TB2OEN ((uint32_t)0x00000008) /*!< Timer B Output 2 enable */
+#define HRTIM_OENR_TC1OEN ((uint32_t)0x00000010) /*!< Timer C Output 1 enable */
+#define HRTIM_OENR_TC2OEN ((uint32_t)0x00000020) /*!< Timer C Output 2 enable */
+#define HRTIM_OENR_TD1OEN ((uint32_t)0x00000040) /*!< Timer D Output 1 enable */
+#define HRTIM_OENR_TD2OEN ((uint32_t)0x00000080) /*!< Timer D Output 2 enable */
+#define HRTIM_OENR_TE1OEN ((uint32_t)0x00000100) /*!< Timer E Output 1 enable */
+#define HRTIM_OENR_TE2OEN ((uint32_t)0x00000200) /*!< Timer E Output 2 enable */
+
+/**** Bit definition for Common HRTIM Timer output disable register ***********/
+#define HRTIM_ODISR_TA1ODIS ((uint32_t)0x00000001) /*!< Timer A Output 1 disable */
+#define HRTIM_ODISR_TA2ODIS ((uint32_t)0x00000002) /*!< Timer A Output 2 disable */
+#define HRTIM_ODISR_TB1ODIS ((uint32_t)0x00000004) /*!< Timer B Output 1 disable */
+#define HRTIM_ODISR_TB2ODIS ((uint32_t)0x00000008) /*!< Timer B Output 2 disable */
+#define HRTIM_ODISR_TC1ODIS ((uint32_t)0x00000010) /*!< Timer C Output 1 disable */
+#define HRTIM_ODISR_TC2ODIS ((uint32_t)0x00000020) /*!< Timer C Output 2 disable */
+#define HRTIM_ODISR_TD1ODIS ((uint32_t)0x00000040) /*!< Timer D Output 1 disable */
+#define HRTIM_ODISR_TD2ODIS ((uint32_t)0x00000080) /*!< Timer D Output 2 disable */
+#define HRTIM_ODISR_TE1ODIS ((uint32_t)0x00000100) /*!< Timer E Output 1 disable */
+#define HRTIM_ODISR_TE2ODIS ((uint32_t)0x00000200) /*!< Timer E Output 2 disable */
+
+/**** Bit definition for Common HRTIM Timer output disable status register *****/
+#define HRTIM_ODSR_TA1ODS ((uint32_t)0x00000001) /*!< Timer A Output 1 disable status */
+#define HRTIM_ODSR_TA2ODS ((uint32_t)0x00000002) /*!< Timer A Output 2 disable status */
+#define HRTIM_ODSR_TB1ODS ((uint32_t)0x00000004) /*!< Timer B Output 1 disable status */
+#define HRTIM_ODSR_TB2ODS ((uint32_t)0x00000008) /*!< Timer B Output 2 disable status */
+#define HRTIM_ODSR_TC1ODS ((uint32_t)0x00000010) /*!< Timer C Output 1 disable status */
+#define HRTIM_ODSR_TC2ODS ((uint32_t)0x00000020) /*!< Timer C Output 2 disable status */
+#define HRTIM_ODSR_TD1ODS ((uint32_t)0x00000040) /*!< Timer D Output 1 disable status */
+#define HRTIM_ODSR_TD2ODS ((uint32_t)0x00000080) /*!< Timer D Output 2 disable status */
+#define HRTIM_ODSR_TE1ODS ((uint32_t)0x00000100) /*!< Timer E Output 1 disable status */
+#define HRTIM_ODSR_TE2ODS ((uint32_t)0x00000200) /*!< Timer E Output 2 disable status */
+
+/**** Bit definition for Common HRTIM Timer Burst mode control register ********/
+#define HRTIM_BMCR_BME ((uint32_t)0x00000001) /*!< Burst mode enbale */
+#define HRTIM_BMCR_BMOM ((uint32_t)0x00000002) /*!< Burst mode operating mode */
+#define HRTIM_BMCR_BMCLK ((uint32_t)0x0000003C) /*!< Burst mode clock source */
+#define HRTIM_BMCR_BMCLK_0 ((uint32_t)0x00000004) /*!< Burst mode clock source bit 0 */
+#define HRTIM_BMCR_BMCLK_1 ((uint32_t)0x00000008) /*!< Burst mode clock source bit 1 */
+#define HRTIM_BMCR_BMCLK_2 ((uint32_t)0x00000010) /*!< Burst mode clock source bit 2 */
+#define HRTIM_BMCR_BMCLK_3 ((uint32_t)0x00000020) /*!< Burst mode clock source bit 3 */
+#define HRTIM_BMCR_BMPRSC ((uint32_t)0x000003C0) /*!< Burst mode prescaler */
+#define HRTIM_BMCR_BMPRSC_0 ((uint32_t)0x00000040) /*!< Burst mode prescaler bit 0 */
+#define HRTIM_BMCR_BMPRSC_1 ((uint32_t)0x00000080) /*!< Burst mode prescaler bit 1 */
+#define HRTIM_BMCR_BMPRSC_2 ((uint32_t)0x00000100) /*!< Burst mode prescaler bit 2 */
+#define HRTIM_BMCR_BMPRSC_3 ((uint32_t)0x00000200) /*!< Burst mode prescaler bit 3 */
+#define HRTIM_BMCR_BMPREN ((uint32_t)0x00000400) /*!< Burst mode Preload bit */
+#define HRTIM_BMCR_MTBM ((uint32_t)0x00010000) /*!< Master Timer Burst mode */
+#define HRTIM_BMCR_TABM ((uint32_t)0x00020000) /*!< Timer A Burst mode */
+#define HRTIM_BMCR_TBBM ((uint32_t)0x00040000) /*!< Timer B Burst mode */
+#define HRTIM_BMCR_TCBM ((uint32_t)0x00080000) /*!< Timer C Burst mode */
+#define HRTIM_BMCR_TDBM ((uint32_t)0x00100000) /*!< Timer D Burst mode */
+#define HRTIM_BMCR_TEBM ((uint32_t)0x00200000) /*!< Timer E Burst mode */
+#define HRTIM_BMCR_BMSTAT ((uint32_t)0x80000000) /*!< Burst mode status */
+
+/**** Bit definition for Common HRTIM Timer Burst mode Trigger register *******/
+#define HRTIM_BMTRGR_SW ((uint32_t)0x00000001) /*!< Software start */
+#define HRTIM_BMTRGR_MSTRST ((uint32_t)0x00000002) /*!< Master reset */
+#define HRTIM_BMTRGR_MSTREP ((uint32_t)0x00000004) /*!< Master repetition */
+#define HRTIM_BMTRGR_MSTCMP1 ((uint32_t)0x00000008) /*!< Master compare 1 */
+#define HRTIM_BMTRGR_MSTCMP2 ((uint32_t)0x00000010) /*!< Master compare 2 */
+#define HRTIM_BMTRGR_MSTCMP3 ((uint32_t)0x00000020) /*!< Master compare 3 */
+#define HRTIM_BMTRGR_MSTCMP4 ((uint32_t)0x00000040) /*!< Master compare 4 */
+#define HRTIM_BMTRGR_TARST ((uint32_t)0x00000080) /*!< Timer A reset */
+#define HRTIM_BMTRGR_TAREP ((uint32_t)0x00000100) /*!< Timer A repetition */
+#define HRTIM_BMTRGR_TACMP1 ((uint32_t)0x00000200) /*!< Timer A compare 1 */
+#define HRTIM_BMTRGR_TACMP2 ((uint32_t)0x00000400) /*!< Timer A compare 2 */
+#define HRTIM_BMTRGR_TBRST ((uint32_t)0x00000800) /*!< Timer B reset */
+#define HRTIM_BMTRGR_TBREP ((uint32_t)0x00001000) /*!< Timer B repetition */
+#define HRTIM_BMTRGR_TBCMP1 ((uint32_t)0x00002000) /*!< Timer B compare 1 */
+#define HRTIM_BMTRGR_TBCMP2 ((uint32_t)0x00004000) /*!< Timer B compare 2 */
+#define HRTIM_BMTRGR_TCRST ((uint32_t)0x00008000) /*!< Timer C reset */
+#define HRTIM_BMTRGR_TCREP ((uint32_t)0x00010000) /*!< Timer C repetition */
+#define HRTIM_BMTRGR_TCCMP1 ((uint32_t)0x00020000) /*!< Timer C compare 1 */
+#define HRTIM_BMTRGR_TCCMP2 ((uint32_t)0x00040000) /*!< Timer C compare 2 */
+#define HRTIM_BMTRGR_TDRST ((uint32_t)0x00080000) /*!< Timer D reset */
+#define HRTIM_BMTRGR_TDREP ((uint32_t)0x00100000) /*!< Timer D repetition */
+#define HRTIM_BMTRGR_TDCMP1 ((uint32_t)0x00200000) /*!< Timer D compare 1 */
+#define HRTIM_BMTRGR_TDCMP2 ((uint32_t)0x00400000) /*!< Timer D compare 2 */
+#define HRTIM_BMTRGR_TERST ((uint32_t)0x00800000) /*!< Timer E reset */
+#define HRTIM_BMTRGR_TEREP ((uint32_t)0x01000000) /*!< Timer E repetition */
+#define HRTIM_BMTRGR_TECMP1 ((uint32_t)0x02000000) /*!< Timer E compare 1 */
+#define HRTIM_BMTRGR_TECMP2 ((uint32_t)0x04000000) /*!< Timer E compare 2 */
+#define HRTIM_BMTRGR_TAEEV7 ((uint32_t)0x08000000) /*!< Timer A period following External Event7 */
+#define HRTIM_BMTRGR_TDEEV8 ((uint32_t)0x10000000) /*!< Timer D period following External Event8 */
+#define HRTIM_BMTRGR_EEV7 ((uint32_t)0x20000000) /*!< External Event 7 */
+#define HRTIM_BMTRGR_EEV8 ((uint32_t)0x40000000) /*!< External Event 8 */
+#define HRTIM_BMTRGR_OCHPEV ((uint32_t)0x80000000) /*!< on-chip Event */
+
+/******************* Bit definition for HRTIM_BMCMPR register ***************/
+#define HRTIM_BMCMPR_BMCMPR ((uint32_t)0x0000FFFF) /*!<!<Burst Compare Value */
+
+/******************* Bit definition for HRTIM_BMPER register ****************/
+#define HRTIM_BMPER_BMPER ((uint32_t)0x0000FFFF) /*!<!<Burst period Value */
+
+/******************* Bit definition for HRTIM_EECR1 register ****************/
+#define HRTIM_EECR1_EE1SRC ((uint32_t)0x00000003) /*!< External event 1 source */
+#define HRTIM_EECR1_EE1SRC_0 ((uint32_t)0x00000001) /*!< External event 1 source bit 0 */
+#define HRTIM_EECR1_EE1SRC_1 ((uint32_t)0x00000002) /*!< External event 1 source bit 1 */
+#define HRTIM_EECR1_EE1POL ((uint32_t)0x00000004) /*!< External event 1 Polarity */
+#define HRTIM_EECR1_EE1SNS ((uint32_t)0x00000018) /*!< External event 1 sensitivity */
+#define HRTIM_EECR1_EE1SNS_0 ((uint32_t)0x00000008) /*!< External event 1 sensitivity bit 0 */
+#define HRTIM_EECR1_EE1SNS_1 ((uint32_t)0x00000010) /*!< External event 1 sensitivity bit 1 */
+#define HRTIM_EECR1_EE1FAST ((uint32_t)0x00000020) /*!< External event 1 Fast mode */
+
+#define HRTIM_EECR1_EE2SRC ((uint32_t)0x000000C0) /*!< External event 2 source */
+#define HRTIM_EECR1_EE2SRC_0 ((uint32_t)0x00000040) /*!< External event 2 source bit 0 */
+#define HRTIM_EECR1_EE2SRC_1 ((uint32_t)0x00000080) /*!< External event 2 source bit 1 */
+#define HRTIM_EECR1_EE2POL ((uint32_t)0x00000100) /*!< External event 2 Polarity */
+#define HRTIM_EECR1_EE2SNS ((uint32_t)0x00000600) /*!< External event 2 sensitivity */
+#define HRTIM_EECR1_EE2SNS_0 ((uint32_t)0x00000200) /*!< External event 2 sensitivity bit 0 */
+#define HRTIM_EECR1_EE2SNS_1 ((uint32_t)0x00000400) /*!< External event 2 sensitivity bit 1 */
+#define HRTIM_EECR1_EE2FAST ((uint32_t)0x00000800) /*!< External event 2 Fast mode */
+
+#define HRTIM_EECR1_EE3SRC ((uint32_t)0x00003000) /*!< External event 3 source */
+#define HRTIM_EECR1_EE3SRC_0 ((uint32_t)0x00001000) /*!< External event 3 source bit 0 */
+#define HRTIM_EECR1_EE3SRC_1 ((uint32_t)0x00002000) /*!< External event 3 source bit 1 */
+#define HRTIM_EECR1_EE3POL ((uint32_t)0x00004000) /*!< External event 3 Polarity */
+#define HRTIM_EECR1_EE3SNS ((uint32_t)0x00018000) /*!< External event 3 sensitivity */
+#define HRTIM_EECR1_EE3SNS_0 ((uint32_t)0x00008000) /*!< External event 3 sensitivity bit 0 */
+#define HRTIM_EECR1_EE3SNS_1 ((uint32_t)0x00010000) /*!< External event 3 sensitivity bit 1 */
+#define HRTIM_EECR1_EE3FAST ((uint32_t)0x00020000) /*!< External event 3 Fast mode */
+
+#define HRTIM_EECR1_EE4SRC ((uint32_t)0x000C0000) /*!< External event 4 source */
+#define HRTIM_EECR1_EE4SRC_0 ((uint32_t)0x00040000) /*!< External event 4 source bit 0 */
+#define HRTIM_EECR1_EE4SRC_1 ((uint32_t)0x00080000) /*!< External event 4 source bit 1 */
+#define HRTIM_EECR1_EE4POL ((uint32_t)0x00100000) /*!< External event 4 Polarity */
+#define HRTIM_EECR1_EE4SNS ((uint32_t)0x00600000) /*!< External event 4 sensitivity */
+#define HRTIM_EECR1_EE4SNS_0 ((uint32_t)0x00200000) /*!< External event 4 sensitivity bit 0 */
+#define HRTIM_EECR1_EE4SNS_1 ((uint32_t)0x00400000) /*!< External event 4 sensitivity bit 1 */
+#define HRTIM_EECR1_EE4FAST ((uint32_t)0x00800000) /*!< External event 4 Fast mode */
+
+#define HRTIM_EECR1_EE5SRC ((uint32_t)0x03000000) /*!< External event 5 source */
+#define HRTIM_EECR1_EE5SRC_0 ((uint32_t)0x01000000) /*!< External event 5 source bit 0 */
+#define HRTIM_EECR1_EE5SRC_1 ((uint32_t)0x02000000) /*!< External event 5 source bit 1 */
+#define HRTIM_EECR1_EE5POL ((uint32_t)0x04000000) /*!< External event 5 Polarity */
+#define HRTIM_EECR1_EE5SNS ((uint32_t)0x18000000) /*!< External event 5 sensitivity */
+#define HRTIM_EECR1_EE5SNS_0 ((uint32_t)0x08000000) /*!< External event 5 sensitivity bit 0 */
+#define HRTIM_EECR1_EE5SNS_1 ((uint32_t)0x10000000) /*!< External event 5 sensitivity bit 1 */
+#define HRTIM_EECR1_EE5FAST ((uint32_t)0x20000000) /*!< External event 5 Fast mode */
+
+/******************* Bit definition for HRTIM_EECR2 register ****************/
+#define HRTIM_EECR2_EE6SRC ((uint32_t)0x00000003) /*!< External event 6 source */
+#define HRTIM_EECR2_EE6SRC_0 ((uint32_t)0x00000001) /*!< External event 6 source bit 0 */
+#define HRTIM_EECR2_EE6SRC_1 ((uint32_t)0x00000002) /*!< External event 6 source bit 1 */
+#define HRTIM_EECR2_EE6POL ((uint32_t)0x00000004) /*!< External event 6 Polarity */
+#define HRTIM_EECR2_EE6SNS ((uint32_t)0x00000018) /*!< External event 6 sensitivity */
+#define HRTIM_EECR2_EE6SNS_0 ((uint32_t)0x00000008) /*!< External event 6 sensitivity bit 0 */
+#define HRTIM_EECR2_EE6SNS_1 ((uint32_t)0x00000010) /*!< External event 6 sensitivity bit 1 */
+
+#define HRTIM_EECR2_EE7SRC ((uint32_t)0x000000C0) /*!< External event 7 source */
+#define HRTIM_EECR2_EE7SRC_0 ((uint32_t)0x00000040) /*!< External event 7 source bit 0 */
+#define HRTIM_EECR2_EE7SRC_1 ((uint32_t)0x00000080) /*!< External event 7 source bit 1 */
+#define HRTIM_EECR2_EE7POL ((uint32_t)0x00000100) /*!< External event 7 Polarity */
+#define HRTIM_EECR2_EE7SNS ((uint32_t)0x00000600) /*!< External event 7 sensitivity */
+#define HRTIM_EECR2_EE7SNS_0 ((uint32_t)0x00000200) /*!< External event 7 sensitivity bit 0 */
+#define HRTIM_EECR2_EE7SNS_1 ((uint32_t)0x00000400) /*!< External event 7 sensitivity bit 1 */
+
+#define HRTIM_EECR2_EE8SRC ((uint32_t)0x00003000) /*!< External event 8 source */
+#define HRTIM_EECR2_EE8SRC_0 ((uint32_t)0x00001000) /*!< External event 8 source bit 0 */
+#define HRTIM_EECR2_EE8SRC_1 ((uint32_t)0x00002000) /*!< External event 8 source bit 1 */
+#define HRTIM_EECR2_EE8POL ((uint32_t)0x00004000) /*!< External event 8 Polarity */
+#define HRTIM_EECR2_EE8SNS ((uint32_t)0x00018000) /*!< External event 8 sensitivity */
+#define HRTIM_EECR2_EE8SNS_0 ((uint32_t)0x00008000) /*!< External event 8 sensitivity bit 0 */
+#define HRTIM_EECR2_EE8SNS_1 ((uint32_t)0x00010000) /*!< External event 8 sensitivity bit 1 */
+
+#define HRTIM_EECR2_EE9SRC ((uint32_t)0x000C0000) /*!< External event 9 source */
+#define HRTIM_EECR2_EE9SRC_0 ((uint32_t)0x00040000) /*!< External event 9 source bit 0 */
+#define HRTIM_EECR2_EE9SRC_1 ((uint32_t)0x00080000) /*!< External event 9 source bit 1 */
+#define HRTIM_EECR2_EE9POL ((uint32_t)0x00100000) /*!< External event 9 Polarity */
+#define HRTIM_EECR2_EE9SNS ((uint32_t)0x00600000) /*!< External event 9 sensitivity */
+#define HRTIM_EECR2_EE9SNS_0 ((uint32_t)0x00200000) /*!< External event 9 sensitivity bit 0 */
+#define HRTIM_EECR2_EE9SNS_1 ((uint32_t)0x00400000) /*!< External event 9 sensitivity bit 1 */
+
+#define HRTIM_EECR2_EE10SRC ((uint32_t)0x03000000) /*!< External event 10 source */
+#define HRTIM_EECR2_EE10SRC_0 ((uint32_t)0x01000000) /*!< External event 10 source bit 0 */
+#define HRTIM_EECR2_EE10SRC_1 ((uint32_t)0x02000000) /*!< External event 10 source bit 1 */
+#define HRTIM_EECR2_EE10POL ((uint32_t)0x04000000) /*!< External event 10 Polarity */
+#define HRTIM_EECR2_EE10SNS ((uint32_t)0x18000000) /*!< External event 10 sensitivity */
+#define HRTIM_EECR2_EE10SNS_0 ((uint32_t)0x08000000) /*!< External event 10 sensitivity bit 0 */
+#define HRTIM_EECR2_EE10SNS_1 ((uint32_t)0x10000000) /*!< External event 10 sensitivity bit 1 */
+
+/******************* Bit definition for HRTIM_EECR3 register ****************/
+#define HRTIM_EECR3_EE6F ((uint32_t)0x0000000F) /*!< External event 6 filter */
+#define HRTIM_EECR3_EE6F_0 ((uint32_t)0x00000001) /*!< External event 6 filter bit 0 */
+#define HRTIM_EECR3_EE6F_1 ((uint32_t)0x00000002) /*!< External event 6 filter bit 1 */
+#define HRTIM_EECR3_EE6F_2 ((uint32_t)0x00000004) /*!< External event 6 filter bit 2 */
+#define HRTIM_EECR3_EE6F_3 ((uint32_t)0x00000008) /*!< External event 6 filter bit 3 */
+#define HRTIM_EECR3_EE7F ((uint32_t)0x000003C0) /*!< External event 7 filter */
+#define HRTIM_EECR3_EE7F_0 ((uint32_t)0x00000040) /*!< External event 7 filter bit 0 */
+#define HRTIM_EECR3_EE7F_1 ((uint32_t)0x00000080) /*!< External event 7 filter bit 1 */
+#define HRTIM_EECR3_EE7F_2 ((uint32_t)0x00000100) /*!< External event 7 filter bit 2 */
+#define HRTIM_EECR3_EE7F_3 ((uint32_t)0x00000200) /*!< External event 7 filter bit 3 */
+#define HRTIM_EECR3_EE8F ((uint32_t)0x0000F000) /*!< External event 8 filter */
+#define HRTIM_EECR3_EE8F_0 ((uint32_t)0x00001000) /*!< External event 8 filter bit 0 */
+#define HRTIM_EECR3_EE8F_1 ((uint32_t)0x00002000) /*!< External event 8 filter bit 1 */
+#define HRTIM_EECR3_EE8F_2 ((uint32_t)0x00004000) /*!< External event 8 filter bit 2 */
+#define HRTIM_EECR3_EE8F_3 ((uint32_t)0x00008000) /*!< External event 8 filter bit 3 */
+#define HRTIM_EECR3_EE9F ((uint32_t)0x003C0000) /*!< External event 9 filter */
+#define HRTIM_EECR3_EE9F_0 ((uint32_t)0x00040000) /*!< External event 9 filter bit 0 */
+#define HRTIM_EECR3_EE9F_1 ((uint32_t)0x00080000) /*!< External event 9 filter bit 1 */
+#define HRTIM_EECR3_EE9F_2 ((uint32_t)0x00100000) /*!< External event 9 filter bit 2 */
+#define HRTIM_EECR3_EE9F_3 ((uint32_t)0x00200000) /*!< External event 9 filter bit 3 */
+#define HRTIM_EECR3_EE10F ((uint32_t)0x0F000000) /*!< External event 10 filter */
+#define HRTIM_EECR3_EE10F_0 ((uint32_t)0x01000000) /*!< External event 10 filter bit 0 */
+#define HRTIM_EECR3_EE10F_1 ((uint32_t)0x02000000) /*!< External event 10 filter bit 1 */
+#define HRTIM_EECR3_EE10F_2 ((uint32_t)0x04000000) /*!< External event 10 filter bit 2 */
+#define HRTIM_EECR3_EE10F_3 ((uint32_t)0x08000000) /*!< External event 10 filter bit 3 */
+#define HRTIM_EECR3_EEVSD ((uint32_t)0xC0000000) /*!< External event sampling clock division */
+#define HRTIM_EECR3_EEVSD_0 ((uint32_t)0x40000000) /*!< External event sampling clock division bit 0 */
+#define HRTIM_EECR3_EEVSD_1 ((uint32_t)0x80000000) /*!< External event sampling clock division bit 1 */
+
+/******************* Bit definition for HRTIM_ADC1R register ****************/
+#define HRTIM_ADC1R_AD1MC1 ((uint32_t)0x00000001) /*!< ADC Trigger 1 on master compare 1 */
+#define HRTIM_ADC1R_AD1MC2 ((uint32_t)0x00000002) /*!< ADC Trigger 1 on master compare 2 */
+#define HRTIM_ADC1R_AD1MC3 ((uint32_t)0x00000004) /*!< ADC Trigger 1 on master compare 3 */
+#define HRTIM_ADC1R_AD1MC4 ((uint32_t)0x00000008) /*!< ADC Trigger 1 on master compare 4 */
+#define HRTIM_ADC1R_AD1MPER ((uint32_t)0x00000010) /*!< ADC Trigger 1 on master period */
+#define HRTIM_ADC1R_AD1EEV1 ((uint32_t)0x00000020) /*!< ADC Trigger 1 on external event 1 */
+#define HRTIM_ADC1R_AD1EEV2 ((uint32_t)0x00000040) /*!< ADC Trigger 1 on external event 2 */
+#define HRTIM_ADC1R_AD1EEV3 ((uint32_t)0x00000080) /*!< ADC Trigger 1 on external event 3 */
+#define HRTIM_ADC1R_AD1EEV4 ((uint32_t)0x00000100) /*!< ADC Trigger 1 on external event 4 */
+#define HRTIM_ADC1R_AD1EEV5 ((uint32_t)0x00000200) /*!< ADC Trigger 1 on external event 5 */
+#define HRTIM_ADC1R_AD1TAC2 ((uint32_t)0x00000400) /*!< ADC Trigger 1 on Timer A compare 2 */
+#define HRTIM_ADC1R_AD1TAC3 ((uint32_t)0x00000800) /*!< ADC Trigger 1 on Timer A compare 3 */
+#define HRTIM_ADC1R_AD1TAC4 ((uint32_t)0x00001000) /*!< ADC Trigger 1 on Timer A compare 4 */
+#define HRTIM_ADC1R_AD1TAPER ((uint32_t)0x00002000) /*!< ADC Trigger 1 on Timer A period */
+#define HRTIM_ADC1R_AD1TARST ((uint32_t)0x00004000) /*!< ADC Trigger 1 on Timer A reset */
+#define HRTIM_ADC1R_AD1TBC2 ((uint32_t)0x00008000) /*!< ADC Trigger 1 on Timer B compare 2 */
+#define HRTIM_ADC1R_AD1TBC3 ((uint32_t)0x00010000) /*!< ADC Trigger 1 on Timer B compare 3 */
+#define HRTIM_ADC1R_AD1TBC4 ((uint32_t)0x00020000) /*!< ADC Trigger 1 on Timer B compare 4 */
+#define HRTIM_ADC1R_AD1TBPER ((uint32_t)0x00040000) /*!< ADC Trigger 1 on Timer B period */
+#define HRTIM_ADC1R_AD1TBRST ((uint32_t)0x00080000) /*!< ADC Trigger 1 on Timer B reset */
+#define HRTIM_ADC1R_AD1TCC2 ((uint32_t)0x00100000) /*!< ADC Trigger 1 on Timer C compare 2 */
+#define HRTIM_ADC1R_AD1TCC3 ((uint32_t)0x00200000) /*!< ADC Trigger 1 on Timer C compare 3 */
+#define HRTIM_ADC1R_AD1TCC4 ((uint32_t)0x00400000) /*!< ADC Trigger 1 on Timer C compare 4 */
+#define HRTIM_ADC1R_AD1TCPER ((uint32_t)0x00800000) /*!< ADC Trigger 1 on Timer C period */
+#define HRTIM_ADC1R_AD1TDC2 ((uint32_t)0x01000000) /*!< ADC Trigger 1 on Timer D compare 2 */
+#define HRTIM_ADC1R_AD1TDC3 ((uint32_t)0x02000000) /*!< ADC Trigger 1 on Timer D compare 3 */
+#define HRTIM_ADC1R_AD1TDC4 ((uint32_t)0x04000000) /*!< ADC Trigger 1 on Timer D compare 4 */
+#define HRTIM_ADC1R_AD1TDPER ((uint32_t)0x08000000) /*!< ADC Trigger 1 on Timer D period */
+#define HRTIM_ADC1R_AD1TEC2 ((uint32_t)0x10000000) /*!< ADC Trigger 1 on Timer E compare 2 */
+#define HRTIM_ADC1R_AD1TEC3 ((uint32_t)0x20000000) /*!< ADC Trigger 1 on Timer E compare 3 */
+#define HRTIM_ADC1R_AD1TEC4 ((uint32_t)0x40000000) /*!< ADC Trigger 1 on Timer E compare 4 */
+#define HRTIM_ADC1R_AD1TEPER ((uint32_t)0x80000000) /*!< ADC Trigger 1 on Timer E period */
+
+/******************* Bit definition for HRTIM_ADC2R register ****************/
+#define HRTIM_ADC2R_AD2MC1 ((uint32_t)0x00000001) /*!< ADC Trigger 2 on master compare 1 */
+#define HRTIM_ADC2R_AD2MC2 ((uint32_t)0x00000002) /*!< ADC Trigger 2 on master compare 2 */
+#define HRTIM_ADC2R_AD2MC3 ((uint32_t)0x00000004) /*!< ADC Trigger 2 on master compare 3 */
+#define HRTIM_ADC2R_AD2MC4 ((uint32_t)0x00000008) /*!< ADC Trigger 2 on master compare 4 */
+#define HRTIM_ADC2R_AD2MPER ((uint32_t)0x00000010) /*!< ADC Trigger 2 on master period */
+#define HRTIM_ADC2R_AD2EEV6 ((uint32_t)0x00000020) /*!< ADC Trigger 2 on external event 6 */
+#define HRTIM_ADC2R_AD2EEV7 ((uint32_t)0x00000040) /*!< ADC Trigger 2 on external event 7 */
+#define HRTIM_ADC2R_AD2EEV8 ((uint32_t)0x00000080) /*!< ADC Trigger 2 on external event 8 */
+#define HRTIM_ADC2R_AD2EEV9 ((uint32_t)0x00000100) /*!< ADC Trigger 2 on external event 9 */
+#define HRTIM_ADC2R_AD2EEV10 ((uint32_t)0x00000200) /*!< ADC Trigger 2 on external event 10 */
+#define HRTIM_ADC2R_AD2TAC2 ((uint32_t)0x00000400) /*!< ADC Trigger 2 on Timer A compare 2 */
+#define HRTIM_ADC2R_AD2TAC3 ((uint32_t)0x00000800) /*!< ADC Trigger 2 on Timer A compare 3 */
+#define HRTIM_ADC2R_AD2TAC4 ((uint32_t)0x00001000) /*!< ADC Trigger 2 on Timer A compare 4*/
+#define HRTIM_ADC2R_AD2TAPER ((uint32_t)0x00002000) /*!< ADC Trigger 2 on Timer A period */
+#define HRTIM_ADC2R_AD2TBC2 ((uint32_t)0x00004000) /*!< ADC Trigger 2 on Timer B compare 2 */
+#define HRTIM_ADC2R_AD2TBC3 ((uint32_t)0x00008000) /*!< ADC Trigger 2 on Timer B compare 3 */
+#define HRTIM_ADC2R_AD2TBC4 ((uint32_t)0x00010000) /*!< ADC Trigger 2 on Timer B compare 4 */
+#define HRTIM_ADC2R_AD2TBPER ((uint32_t)0x00020000) /*!< ADC Trigger 2 on Timer B period */
+#define HRTIM_ADC2R_AD2TCC2 ((uint32_t)0x00040000) /*!< ADC Trigger 2 on Timer C compare 2 */
+#define HRTIM_ADC2R_AD2TCC3 ((uint32_t)0x00080000) /*!< ADC Trigger 2 on Timer C compare 3 */
+#define HRTIM_ADC2R_AD2TCC4 ((uint32_t)0x00100000) /*!< ADC Trigger 2 on Timer C compare 4 */
+#define HRTIM_ADC2R_AD2TCPER ((uint32_t)0x00200000) /*!< ADC Trigger 2 on Timer C period */
+#define HRTIM_ADC2R_AD2TCRST ((uint32_t)0x00400000) /*!< ADC Trigger 2 on Timer C reset */
+#define HRTIM_ADC2R_AD2TDC2 ((uint32_t)0x00800000) /*!< ADC Trigger 2 on Timer D compare 2 */
+#define HRTIM_ADC2R_AD2TDC3 ((uint32_t)0x01000000) /*!< ADC Trigger 2 on Timer D compare 3 */
+#define HRTIM_ADC2R_AD2TDC4 ((uint32_t)0x02000000) /*!< ADC Trigger 2 on Timer D compare 4*/
+#define HRTIM_ADC2R_AD2TDPER ((uint32_t)0x04000000) /*!< ADC Trigger 2 on Timer D period */
+#define HRTIM_ADC2R_AD2TDRST ((uint32_t)0x08000000) /*!< ADC Trigger 2 on Timer D reset */
+#define HRTIM_ADC2R_AD2TEC2 ((uint32_t)0x10000000) /*!< ADC Trigger 2 on Timer E compare 2 */
+#define HRTIM_ADC2R_AD2TEC3 ((uint32_t)0x20000000) /*!< ADC Trigger 2 on Timer E compare 3 */
+#define HRTIM_ADC2R_AD2TEC4 ((uint32_t)0x40000000) /*!< ADC Trigger 2 on Timer E compare 4 */
+#define HRTIM_ADC2R_AD2TERST ((uint32_t)0x80000000) /*!< ADC Trigger 2 on Timer E reset */
+
+/******************* Bit definition for HRTIM_ADC3R register ****************/
+#define HRTIM_ADC3R_AD3MC1 ((uint32_t)0x00000001) /*!< ADC Trigger 3 on master compare 1 */
+#define HRTIM_ADC3R_AD3MC2 ((uint32_t)0x00000002) /*!< ADC Trigger 3 on master compare 2 */
+#define HRTIM_ADC3R_AD3MC3 ((uint32_t)0x00000004) /*!< ADC Trigger 3 on master compare 3 */
+#define HRTIM_ADC3R_AD3MC4 ((uint32_t)0x00000008) /*!< ADC Trigger 3 on master compare 4 */
+#define HRTIM_ADC3R_AD3MPER ((uint32_t)0x00000010) /*!< ADC Trigger 3 on master period */
+#define HRTIM_ADC3R_AD3EEV1 ((uint32_t)0x00000020) /*!< ADC Trigger 3 on external event 1 */
+#define HRTIM_ADC3R_AD3EEV2 ((uint32_t)0x00000040) /*!< ADC Trigger 3 on external event 2 */
+#define HRTIM_ADC3R_AD3EEV3 ((uint32_t)0x00000080) /*!< ADC Trigger 3 on external event 3 */
+#define HRTIM_ADC3R_AD3EEV4 ((uint32_t)0x00000100) /*!< ADC Trigger 3 on external event 4 */
+#define HRTIM_ADC3R_AD3EEV5 ((uint32_t)0x00000200) /*!< ADC Trigger 3 on external event 5 */
+#define HRTIM_ADC3R_AD3TAC2 ((uint32_t)0x00000400) /*!< ADC Trigger 3 on Timer A compare 2 */
+#define HRTIM_ADC3R_AD3TAC3 ((uint32_t)0x00000800) /*!< ADC Trigger 3 on Timer A compare 3 */
+#define HRTIM_ADC3R_AD3TAC4 ((uint32_t)0x00001000) /*!< ADC Trigger 3 on Timer A compare 4 */
+#define HRTIM_ADC3R_AD3TAPER ((uint32_t)0x00002000) /*!< ADC Trigger 3 on Timer A period */
+#define HRTIM_ADC3R_AD3TARST ((uint32_t)0x00004000) /*!< ADC Trigger 3 on Timer A reset */
+#define HRTIM_ADC3R_AD3TBC2 ((uint32_t)0x00008000) /*!< ADC Trigger 3 on Timer B compare 2 */
+#define HRTIM_ADC3R_AD3TBC3 ((uint32_t)0x00010000) /*!< ADC Trigger 3 on Timer B compare 3 */
+#define HRTIM_ADC3R_AD3TBC4 ((uint32_t)0x00020000) /*!< ADC Trigger 3 on Timer B compare 4 */
+#define HRTIM_ADC3R_AD3TBPER ((uint32_t)0x00040000) /*!< ADC Trigger 3 on Timer B period */
+#define HRTIM_ADC3R_AD3TBRST ((uint32_t)0x00080000) /*!< ADC Trigger 3 on Timer B reset */
+#define HRTIM_ADC3R_AD3TCC2 ((uint32_t)0x00100000) /*!< ADC Trigger 3 on Timer C compare 2 */
+#define HRTIM_ADC3R_AD3TCC3 ((uint32_t)0x00200000) /*!< ADC Trigger 3 on Timer C compare 3 */
+#define HRTIM_ADC3R_AD3TCC4 ((uint32_t)0x00400000) /*!< ADC Trigger 3 on Timer C compare 4 */
+#define HRTIM_ADC3R_AD3TCPER ((uint32_t)0x00800000) /*!< ADC Trigger 3 on Timer C period */
+#define HRTIM_ADC3R_AD3TDC2 ((uint32_t)0x01000000) /*!< ADC Trigger 3 on Timer D compare 2 */
+#define HRTIM_ADC3R_AD3TDC3 ((uint32_t)0x02000000) /*!< ADC Trigger 3 on Timer D compare 3 */
+#define HRTIM_ADC3R_AD3TDC4 ((uint32_t)0x04000000) /*!< ADC Trigger 3 on Timer D compare 4 */
+#define HRTIM_ADC3R_AD3TDPER ((uint32_t)0x08000000) /*!< ADC Trigger 3 on Timer D period */
+#define HRTIM_ADC3R_AD3TEC2 ((uint32_t)0x10000000) /*!< ADC Trigger 3 on Timer E compare 2 */
+#define HRTIM_ADC3R_AD3TEC3 ((uint32_t)0x20000000) /*!< ADC Trigger 3 on Timer E compare 3 */
+#define HRTIM_ADC3R_AD3TEC4 ((uint32_t)0x40000000) /*!< ADC Trigger 3 on Timer E compare 4 */
+#define HRTIM_ADC3R_AD3TEPER ((uint32_t)0x80000000) /*!< ADC Trigger 3 on Timer E period */
+
+/******************* Bit definition for HRTIM_ADC4R register ****************/
+#define HRTIM_ADC4R_AD4MC1 ((uint32_t)0x00000001) /*!< ADC Trigger 4 on master compare 1 */
+#define HRTIM_ADC4R_AD4MC2 ((uint32_t)0x00000002) /*!< ADC Trigger 4 on master compare 2 */
+#define HRTIM_ADC4R_AD4MC3 ((uint32_t)0x00000004) /*!< ADC Trigger 4 on master compare 3 */
+#define HRTIM_ADC4R_AD4MC4 ((uint32_t)0x00000008) /*!< ADC Trigger 4 on master compare 4 */
+#define HRTIM_ADC4R_AD4MPER ((uint32_t)0x00000010) /*!< ADC Trigger 4 on master period */
+#define HRTIM_ADC4R_AD4EEV6 ((uint32_t)0x00000020) /*!< ADC Trigger 4 on external event 6 */
+#define HRTIM_ADC4R_AD4EEV7 ((uint32_t)0x00000040) /*!< ADC Trigger 4 on external event 7 */
+#define HRTIM_ADC4R_AD4EEV8 ((uint32_t)0x00000080) /*!< ADC Trigger 4 on external event 8 */
+#define HRTIM_ADC4R_AD4EEV9 ((uint32_t)0x00000100) /*!< ADC Trigger 4 on external event 9 */
+#define HRTIM_ADC4R_AD4EEV10 ((uint32_t)0x00000200) /*!< ADC Trigger 4 on external event 10 */
+#define HRTIM_ADC4R_AD4TAC2 ((uint32_t)0x00000400) /*!< ADC Trigger 4 on Timer A compare 2 */
+#define HRTIM_ADC4R_AD4TAC3 ((uint32_t)0x00000800) /*!< ADC Trigger 4 on Timer A compare 3 */
+#define HRTIM_ADC4R_AD4TAC4 ((uint32_t)0x00001000) /*!< ADC Trigger 4 on Timer A compare 4*/
+#define HRTIM_ADC4R_AD4TAPER ((uint32_t)0x00002000) /*!< ADC Trigger 4 on Timer A period */
+#define HRTIM_ADC4R_AD4TBC2 ((uint32_t)0x00004000) /*!< ADC Trigger 4 on Timer B compare 2 */
+#define HRTIM_ADC4R_AD4TBC3 ((uint32_t)0x00008000) /*!< ADC Trigger 4 on Timer B compare 3 */
+#define HRTIM_ADC4R_AD4TBC4 ((uint32_t)0x00010000) /*!< ADC Trigger 4 on Timer B compare 4 */
+#define HRTIM_ADC4R_AD4TBPER ((uint32_t)0x00020000) /*!< ADC Trigger 4 on Timer B period */
+#define HRTIM_ADC4R_AD4TCC2 ((uint32_t)0x00040000) /*!< ADC Trigger 4 on Timer C compare 2 */
+#define HRTIM_ADC4R_AD4TCC3 ((uint32_t)0x00080000) /*!< ADC Trigger 4 on Timer C compare 3 */
+#define HRTIM_ADC4R_AD4TCC4 ((uint32_t)0x00100000) /*!< ADC Trigger 4 on Timer C compare 4 */
+#define HRTIM_ADC4R_AD4TCPER ((uint32_t)0x00200000) /*!< ADC Trigger 4 on Timer C period */
+#define HRTIM_ADC4R_AD4TCRST ((uint32_t)0x00400000) /*!< ADC Trigger 4 on Timer C reset */
+#define HRTIM_ADC4R_AD4TDC2 ((uint32_t)0x00800000) /*!< ADC Trigger 4 on Timer D compare 2 */
+#define HRTIM_ADC4R_AD4TDC3 ((uint32_t)0x01000000) /*!< ADC Trigger 4 on Timer D compare 3 */
+#define HRTIM_ADC4R_AD4TDC4 ((uint32_t)0x02000000) /*!< ADC Trigger 4 on Timer D compare 4*/
+#define HRTIM_ADC4R_AD4TDPER ((uint32_t)0x04000000) /*!< ADC Trigger 4 on Timer D period */
+#define HRTIM_ADC4R_AD4TDRST ((uint32_t)0x08000000) /*!< ADC Trigger 4 on Timer D reset */
+#define HRTIM_ADC4R_AD4TEC2 ((uint32_t)0x10000000) /*!< ADC Trigger 4 on Timer E compare 2 */
+#define HRTIM_ADC4R_AD4TEC3 ((uint32_t)0x20000000) /*!< ADC Trigger 4 on Timer E compare 3 */
+#define HRTIM_ADC4R_AD4TEC4 ((uint32_t)0x40000000) /*!< ADC Trigger 4 on Timer E compare 4 */
+#define HRTIM_ADC4R_AD4TERST ((uint32_t)0x80000000) /*!< ADC Trigger 4 on Timer E reset */
+
+/******************* Bit definition for HRTIM_DLLCR register ****************/
+#define HRTIM_DLLCR_CAL ((uint32_t)0x00000001) /*!< DLL calibration start */
+#define HRTIM_DLLCR_CALEN ((uint32_t)0x00000002) /*!< DLL calibration enable */
+#define HRTIM_DLLCR_CALRTE ((uint32_t)0x0000000C) /*!< DLL calibration rate */
+#define HRTIM_DLLCR_CALRTE_0 ((uint32_t)0x00000004) /*!< DLL calibration rate bit 0 */
+#define HRTIM_DLLCR_CALRTE_1 ((uint32_t)0x00000008) /*!< DLL calibration rate bit 1 */
+
+/******************* Bit definition for HRTIM_FLTINR1 register ***************/
+#define HRTIM_FLTINR1_FLT1E ((uint32_t)0x00000001) /*!< Fault 1 enable */
+#define HRTIM_FLTINR1_FLT1P ((uint32_t)0x00000002) /*!< Fault 1 polarity */
+#define HRTIM_FLTINR1_FLT1SRC ((uint32_t)0x00000004) /*!< Fault 1 source */
+#define HRTIM_FLTINR1_FLT1F ((uint32_t)0x00000078) /*!< Fault 1 filter */
+#define HRTIM_FLTINR1_FLT1F_0 ((uint32_t)0x00000008) /*!< Fault 1 filter bit 0 */
+#define HRTIM_FLTINR1_FLT1F_1 ((uint32_t)0x00000010) /*!< Fault 1 filter bit 1 */
+#define HRTIM_FLTINR1_FLT1F_2 ((uint32_t)0x00000020) /*!< Fault 1 filter bit 2 */
+#define HRTIM_FLTINR1_FLT1F_3 ((uint32_t)0x00000040) /*!< Fault 1 filter bit 3 */
+#define HRTIM_FLTINR1_FLT1LCK ((uint32_t)0x00000080) /*!< Fault 1 lock */
+
+#define HRTIM_FLTINR1_FLT2E ((uint32_t)0x00000100) /*!< Fault 2 enable */
+#define HRTIM_FLTINR1_FLT2P ((uint32_t)0x00000200) /*!< Fault 2 polarity */
+#define HRTIM_FLTINR1_FLT2SRC ((uint32_t)0x00000400) /*!< Fault 2 source */
+#define HRTIM_FLTINR1_FLT2F ((uint32_t)0x00007800) /*!< Fault 2 filter */
+#define HRTIM_FLTINR1_FLT2F_0 ((uint32_t)0x00000800) /*!< Fault 2 filter bit 0 */
+#define HRTIM_FLTINR1_FLT2F_1 ((uint32_t)0x00001000) /*!< Fault 2 filter bit 1 */
+#define HRTIM_FLTINR1_FLT2F_2 ((uint32_t)0x00002000) /*!< Fault 2 filter bit 2 */
+#define HRTIM_FLTINR1_FLT2F_3 ((uint32_t)0x00004000) /*!< Fault 2 filter bit 3 */
+#define HRTIM_FLTINR1_FLT2LCK ((uint32_t)0x00008000) /*!< Fault 2 lock */
+
+#define HRTIM_FLTINR1_FLT3E ((uint32_t)0x00010000) /*!< Fault 3 enable */
+#define HRTIM_FLTINR1_FLT3P ((uint32_t)0x00020000) /*!< Fault 3 polarity */
+#define HRTIM_FLTINR1_FLT3SRC ((uint32_t)0x00040000) /*!< Fault 3 source */
+#define HRTIM_FLTINR1_FLT3F ((uint32_t)0x00780000) /*!< Fault 3 filter */
+#define HRTIM_FLTINR1_FLT3F_0 ((uint32_t)0x00080000) /*!< Fault 3 filter bit 0 */
+#define HRTIM_FLTINR1_FLT3F_1 ((uint32_t)0x00100000) /*!< Fault 3 filter bit 1 */
+#define HRTIM_FLTINR1_FLT3F_2 ((uint32_t)0x00200000) /*!< Fault 3 filter bit 2 */
+#define HRTIM_FLTINR1_FLT3F_3 ((uint32_t)0x00400000) /*!< Fault 3 filter bit 3 */
+#define HRTIM_FLTINR1_FLT3LCK ((uint32_t)0x00800000) /*!< Fault 3 lock */
+
+#define HRTIM_FLTINR1_FLT4E ((uint32_t)0x01000000) /*!< Fault 4 enable */
+#define HRTIM_FLTINR1_FLT4P ((uint32_t)0x02000000) /*!< Fault 4 polarity */
+#define HRTIM_FLTINR1_FLT4SRC ((uint32_t)0x04000000) /*!< Fault 4 source */
+#define HRTIM_FLTINR1_FLT4F ((uint32_t)0x78000000) /*!< Fault 4 filter */
+#define HRTIM_FLTINR1_FLT4F_0 ((uint32_t)0x08000000) /*!< Fault 4 filter bit 0 */
+#define HRTIM_FLTINR1_FLT4F_1 ((uint32_t)0x10000000) /*!< Fault 4 filter bit 1 */
+#define HRTIM_FLTINR1_FLT4F_2 ((uint32_t)0x20000000) /*!< Fault 4 filter bit 2 */
+#define HRTIM_FLTINR1_FLT4F_3 ((uint32_t)0x40000000) /*!< Fault 4 filter bit 3 */
+#define HRTIM_FLTINR1_FLT4LCK ((uint32_t)0x80000000) /*!< Fault 4 lock */
+
+/******************* Bit definition for HRTIM_FLTINR2 register ***************/
+#define HRTIM_FLTINR2_FLT5E ((uint32_t)0x00000001) /*!< Fault 5 enable */
+#define HRTIM_FLTINR2_FLT5P ((uint32_t)0x00000002) /*!< Fault 5 polarity */
+#define HRTIM_FLTINR2_FLT5SRC ((uint32_t)0x00000004) /*!< Fault 5 source */
+#define HRTIM_FLTINR2_FLT5F ((uint32_t)0x00000078) /*!< Fault 5 filter */
+#define HRTIM_FLTINR2_FLT5F_0 ((uint32_t)0x00000008) /*!< Fault 5 filter bit 0 */
+#define HRTIM_FLTINR2_FLT5F_1 ((uint32_t)0x00000010) /*!< Fault 5 filter bit 1 */
+#define HRTIM_FLTINR2_FLT5F_2 ((uint32_t)0x00000020) /*!< Fault 5 filter bit 2 */
+#define HRTIM_FLTINR2_FLT5F_3 ((uint32_t)0x00000040) /*!< Fault 5 filter bit 3 */
+#define HRTIM_FLTINR2_FLT5LCK ((uint32_t)0x00000080) /*!< Fault 5 lock */
+#define HRTIM_FLTINR2_FLTSD ((uint32_t)0x03000000) /*!< Fault sampling clock division */
+#define HRTIM_FLTINR2_FLTSD_0 ((uint32_t)0x01000000) /*!< Fault sampling clock division bit 0 */
+#define HRTIM_FLTINR2_FLTSD_1 ((uint32_t)0x02000000) /*!< Fault sampling clock division bit 1 */
+
+/******************* Bit definition for HRTIM_BDMUPR register ***************/
+#define HRTIM_BDMUPR_MCR ((uint32_t)0x00000001) /*!< MCR register update enable */
+#define HRTIM_BDMUPR_MICR ((uint32_t)0x00000002) /*!< MICR register update enable */
+#define HRTIM_BDMUPR_MDIER ((uint32_t)0x00000004) /*!< MDIER register update enable */
+#define HRTIM_BDMUPR_MCNT ((uint32_t)0x00000008) /*!< MCNT register update enable */
+#define HRTIM_BDMUPR_MPER ((uint32_t)0x00000010) /*!< MPER register update enable */
+#define HRTIM_BDMUPR_MREP ((uint32_t)0x00000020) /*!< MREP register update enable */
+#define HRTIM_BDMUPR_MCMP1 ((uint32_t)0x00000040) /*!< MCMP1 register update enable */
+#define HRTIM_BDMUPR_MCMP2 ((uint32_t)0x00000080) /*!< MCMP2 register update enable */
+#define HRTIM_BDMUPR_MCMP3 ((uint32_t)0x00000100) /*!< MCMP3 register update enable */
+#define HRTIM_BDMUPR_MCMP4 ((uint32_t)0x00000200) /*!< MPCMP4 register update enable */
+
+/******************* Bit definition for HRTIM_BDTUPR register ***************/
+#define HRTIM_BDTUPR_TIMCR ((uint32_t)0x00000001) /*!< TIMCR register update enable */
+#define HRTIM_BDTUPR_TIMICR ((uint32_t)0x00000002) /*!< TIMICR register update enable */
+#define HRTIM_BDTUPR_TIMDIER ((uint32_t)0x00000004) /*!< TIMDIER register update enable */
+#define HRTIM_BDTUPR_TIMCNT ((uint32_t)0x00000008) /*!< TIMCNT register update enable */
+#define HRTIM_BDTUPR_TIMPER ((uint32_t)0x00000010) /*!< TIMPER register update enable */
+#define HRTIM_BDTUPR_TIMREP ((uint32_t)0x00000020) /*!< TIMREP register update enable */
+#define HRTIM_BDTUPR_TIMCMP1 ((uint32_t)0x00000040) /*!< TIMCMP1 register update enable */
+#define HRTIM_BDTUPR_TIMCMP2 ((uint32_t)0x00000080) /*!< TIMCMP2 register update enable */
+#define HRTIM_BDTUPR_TIMCMP3 ((uint32_t)0x00000100) /*!< TIMCMP3 register update enable */
+#define HRTIM_BDTUPR_TIMCMP4 ((uint32_t)0x00000200) /*!< TIMCMP4 register update enable */
+#define HRTIM_BDTUPR_TIMDTR ((uint32_t)0x00000400) /*!< TIMDTR register update enable */
+#define HRTIM_BDTUPR_TIMSET1R ((uint32_t)0x00000800) /*!< TIMSET1R register update enable */
+#define HRTIM_BDTUPR_TIMRST1R ((uint32_t)0x00001000) /*!< TIMRST1R register update enable */
+#define HRTIM_BDTUPR_TIMSET2R ((uint32_t)0x00002000) /*!< TIMSET2R register update enable */
+#define HRTIM_BDTUPR_TIMRST2R ((uint32_t)0x00004000) /*!< TIMRST2R register update enable */
+#define HRTIM_BDTUPR_TIMEEFR1 ((uint32_t)0x00008000) /*!< TIMEEFR1 register update enable */
+#define HRTIM_BDTUPR_TIMEEFR2 ((uint32_t)0x00010000) /*!< TIMEEFR2 register update enable */
+#define HRTIM_BDTUPR_TIMRSTR ((uint32_t)0x00020000) /*!< TIMRSTR register update enable */
+#define HRTIM_BDTUPR_TIMCHPR ((uint32_t)0x00040000) /*!< TIMCHPR register update enable */
+#define HRTIM_BDTUPR_TIMOUTR ((uint32_t)0x00080000) /*!< TIMOUTR register update enable */
+#define HRTIM_BDTUPR_TIMFLTR ((uint32_t)0x00100000) /*!< TIMFLTR register update enable */
+
+/******************* Bit definition for HRTIM_BDMADR register ***************/
+#define HRTIM_BDMADR_BDMADR ((uint32_t)0xFFFFFFFF) /*!< Burst DMA Data register */
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register *****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register *****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register *********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register *********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register ********************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *********************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint32_t)0x0000FFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint32_t)0x00000007) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint32_t)0x00000FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint32_t)0x00000001) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x00000002) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x00000004) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_WINR_WIN ((uint32_t)0x00000FFF) /*!< Watchdog counter window value */
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/********************* Bit definition for RCC_CIR register ********************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/****************** Bit definition for RCC_APB2RSTR register *****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 reset */
+#define RCC_APB2RSTR_HRTIM1RST ((uint32_t)0x20000000) /*!< TIM17 reset */
+
+/****************** Bit definition for RCC_APB1RSTR register ******************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */
+#define RCC_APB1RSTR_CANRST ((uint32_t)0x02000000) /*!< CAN reset */
+#define RCC_APB1RSTR_DAC2RST ((uint32_t)0x04000000) /*!< DAC 2 reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR reset */
+#define RCC_APB1RSTR_DAC1RST ((uint32_t)0x20000000) /*!< DAC 1 reset */
+
+/****************** Bit definition for RCC_AHBENR register ******************/
+#define RCC_AHBENR_DMA1EN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS clock enable */
+#define RCC_AHBENR_ADC12EN ((uint32_t)0x10000000) /*!< ADC1/ ADC2 clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register ******************/
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00000001) /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_HRTIM1EN ((uint32_t)0x20000000) /*!< TIM17 reset */
+
+/****************** Bit definition for RCC_APB1ENR register ******************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */
+#define RCC_APB1ENR_CANEN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_DAC2EN ((uint32_t)0x04000000) /*!< DAC 2 clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DAC1EN ((uint32_t)0x20000000) /*!< DAC 1 clock enable */
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSE ((uint32_t)0x00000007) /*!< External Low Speed oscillator [2:0] bits */
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 32 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ****************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TSC reset */
+#define RCC_AHBRSTR_ADC12RST ((uint32_t)0x10000000) /*!< ADC1 & ADC2 reset */
+
+/******************* Bit definition for RCC_CFGR2 register ******************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/*!< ADCPRE12 configuration */
+#define RCC_CFGR2_ADCPRE12 ((uint32_t)0x000001F0) /*!< ADCPRE12[8:4] bits */
+#define RCC_CFGR2_ADCPRE12_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR2_ADCPRE12_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR2_ADCPRE12_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR2_ADCPRE12_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+#define RCC_CFGR2_ADCPRE12_4 ((uint32_t)0x00000100) /*!< Bit 4 */
+
+#define RCC_CFGR2_ADCPRE12_NO ((uint32_t)0x00000000) /*!< ADC12 clock disabled, ADC12 can use AHB clock */
+#define RCC_CFGR2_ADCPRE12_DIV1 ((uint32_t)0x00000100) /*!< ADC12 PLL clock divided by 1 */
+#define RCC_CFGR2_ADCPRE12_DIV2 ((uint32_t)0x00000110) /*!< ADC12 PLL clock divided by 2 */
+#define RCC_CFGR2_ADCPRE12_DIV4 ((uint32_t)0x00000120) /*!< ADC12 PLL clock divided by 4 */
+#define RCC_CFGR2_ADCPRE12_DIV6 ((uint32_t)0x00000130) /*!< ADC12 PLL clock divided by 6 */
+#define RCC_CFGR2_ADCPRE12_DIV8 ((uint32_t)0x00000140) /*!< ADC12 PLL clock divided by 8 */
+#define RCC_CFGR2_ADCPRE12_DIV10 ((uint32_t)0x00000150) /*!< ADC12 PLL clock divided by 10 */
+#define RCC_CFGR2_ADCPRE12_DIV12 ((uint32_t)0x00000160) /*!< ADC12 PLL clock divided by 12 */
+#define RCC_CFGR2_ADCPRE12_DIV16 ((uint32_t)0x00000170) /*!< ADC12 PLL clock divided by 16 */
+#define RCC_CFGR2_ADCPRE12_DIV32 ((uint32_t)0x00000180) /*!< ADC12 PLL clock divided by 32 */
+#define RCC_CFGR2_ADCPRE12_DIV64 ((uint32_t)0x00000190) /*!< ADC12 PLL clock divided by 64 */
+#define RCC_CFGR2_ADCPRE12_DIV128 ((uint32_t)0x000001A0) /*!< ADC12 PLL clock divided by 128 */
+#define RCC_CFGR2_ADCPRE12_DIV256 ((uint32_t)0x000001B0) /*!< ADC12 PLL clock divided by 256 */
+
+/******************* Bit definition for RCC_CFGR3 register ******************/
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK1 clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+#define RCC_CFGR3_I2CSW ((uint32_t)0x00000010) /*!< I2CSW bits */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+#define RCC_CFGR3_TIMSW ((uint32_t)0x00000100) /*!< TIMSW bits */
+#define RCC_CFGR3_TIM1SW ((uint32_t)0x00000100) /*!< TIM1SW bits */
+
+#define RCC_CFGR3_TIM1SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM1 clock source */
+#define RCC_CFGR3_TIM1SW_PLL ((uint32_t)0x00000100) /*!< PLL clock used as TIM1 clock source */
+
+#define RCC_CFGR3_HRTIMSW ((uint32_t)0x00001000) /*!< TIMSW bits */
+#define RCC_CFGR3_HRTIM1SW ((uint32_t)0x00001000) /*!< TIM1SW bits */
+
+#define RCC_CFGR3_HRTIM1SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM1 clock source */
+#define RCC_CFGR3_HRTIM1SW_PLL ((uint32_t)0x00001000) /*!< PLL clock used as TIM1 clock source */
+
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK2 clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+#define RCC_CFGR3_USART3SW ((uint32_t)0x000C0000) /*!< USART3SW[1:0] bits */
+#define RCC_CFGR3_USART3SW_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR3_USART3SW_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART3SW_PCLK ((uint32_t)0x00000000) /*!< PCLK2 clock used as USART3 clock source */
+#define RCC_CFGR3_USART3SW_SYSCLK ((uint32_t)0x00040000) /*!< System clock selected as USART3 clock source */
+#define RCC_CFGR3_USART3SW_LSE ((uint32_t)0x00080000) /*!< LSE oscillator clock used as USART3 clock source */
+#define RCC_CFGR3_USART3SW_HSI ((uint32_t)0x000C0000) /*!< HSI oscillator clock used as USART3 clock source */
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000010)
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!< Tx CRC Register */
+
+/******************************************************************************/
+/* */
+/* System Configuration(SYSCFG) */
+/* */
+/******************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register *****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define SYSCFG_CFGR1_TIM1_ITR3_RMP ((uint32_t)0x00000040) /*!< Timer 1 ITR3 selection */
+#define SYSCFG_CFGR1_DAC1_TRIG1_RMP ((uint32_t)0x00000080) /*!< DAC1 Trigger1 remap */
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x0000F800) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+#define SYSCFG_CFGR1_TIM6DAC1Ch1_DMA_RMP ((uint32_t)0x00002000) /*!< Timer 6 / DAC1 CH1 DMA remap */
+#define SYSCFG_CFGR1_TIM7DAC1Ch2_DMA_RMP ((uint32_t)0x00004000) /*!< Timer 7 / DAC1 CH2 DMA remap */
+#define SYSCFG_CFGR1_DAC2Ch1_DMA_RMP ((uint32_t)0x00008000) /*!< DAC2 CH1 DMA remap */
+#define SYSCFG_CFGR1_I2C_PB6_FMP ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB7_FMP ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB8_FMP ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB9_FMP ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C1_FMP ((uint32_t)0x00100000) /*!< I2C1 Fast mode plus */
+#define SYSCFG_CFGR1_ENCODER_MODE ((uint32_t)0x00C00000) /*!< Encoder Mode */
+#define SYSCFG_CFGR1_ENCODER_MODE_0 ((uint32_t)0x00400000) /*!< Encoder Mode 0 */
+#define SYSCFG_CFGR1_ENCODER_MODE_1 ((uint32_t)0x00800000) /*!< Encoder Mode 1 */
+#define SYSCFG_CFGR1_FPU_IE ((uint32_t)0xFC000000) /*!< Floating Point Unit Interrupt Enable */
+#define SYSCFG_CFGR1_FPU_IE_0 ((uint32_t)0x04000000) /*!< Floating Point Unit Interrupt Enable 0 */
+#define SYSCFG_CFGR1_FPU_IE_1 ((uint32_t)0x08000000) /*!< Floating Point Unit Interrupt Enable 1 */
+#define SYSCFG_CFGR1_FPU_IE_2 ((uint32_t)0x10000000) /*!< Floating Point Unit Interrupt Enable 2 */
+#define SYSCFG_CFGR1_FPU_IE_3 ((uint32_t)0x20000000) /*!< Floating Point Unit Interrupt Enable 3 */
+#define SYSCFG_CFGR1_FPU_IE_4 ((uint32_t)0x40000000) /*!< Floating Point Unit Interrupt Enable 4 */
+#define SYSCFG_CFGR1_FPU_IE_5 ((uint32_t)0x80000000) /*!< Floating Point Unit Interrupt Enable 5 */
+
+/***************** Bit definition for SYSCFG_RCR register *******************/
+#define SYSCFG_RCR_PAGE0 ((uint32_t)0x00000001) /*!< ICODE SRAM Write protection page 0 */
+#define SYSCFG_RCR_PAGE1 ((uint32_t)0x00000002) /*!< ICODE SRAM Write protection page 1 */
+#define SYSCFG_RCR_PAGE2 ((uint32_t)0x00000004) /*!< ICODE SRAM Write protection page 2 */
+#define SYSCFG_RCR_PAGE3 ((uint32_t)0x00000008) /*!< ICODE SRAM Write protection page 3 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x0000000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x000000F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x00000F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0x0000F000) /*!< EXTI 3 configuration */
+
+/*!<*
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x00000000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x00000001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x00000002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint32_t)0x00000003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint32_t)0x00000004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint32_t)0x00000005) /*!< PF[0] pin */
+
+/*!<*
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x00000000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x00000010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x00000020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint32_t)0x00000030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint32_t)0x00000040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint32_t)0x00000050) /*!< PF[1] pin */
+
+/*!<*
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x00000000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x00000100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x00000200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint32_t)0x00000300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint32_t)0x00000400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint32_t)0x00000500) /*!< PF[2] pin */
+
+/*!<*
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x00000000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x00001000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x00002000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint32_t)0x00003000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint32_t)0x00004000) /*!< PE[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x0000000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x000000F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x00000F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0x0000F000) /*!< EXTI 7 configuration */
+
+/*!<*
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x00000000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x00000001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x00000002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint32_t)0x00000003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint32_t)0x00000004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint32_t)0x00000005) /*!< PF[4] pin */
+
+/*!<*
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x00000000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x00000010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x00000020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint32_t)0x00000030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint32_t)0x00000040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint32_t)0x00000050) /*!< PF[5] pin */
+
+/*!<*
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x00000000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x00000100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x00000200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint32_t)0x00000300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint32_t)0x00000400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint32_t)0x00000500) /*!< PF[6] pin */
+
+/*!<*
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x00000000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x00001000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x00002000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint32_t)0x00003000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint32_t)0x00004000) /*!< PE[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x0000000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x000000F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x00000F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0x0000F000) /*!< EXTI 11 configuration */
+
+/*!<*
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x00000000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x00000001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x00000002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint32_t)0x00000003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint32_t)0x00000004) /*!< PE[8] pin */
+
+/*!<*
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x00000000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x00000010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x00000020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint32_t)0x00000030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint32_t)0x00000040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint32_t)0x00000050) /*!< PF[9] pin */
+
+/*!<*
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x00000000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x00000100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x00000200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint32_t)0x00000300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint32_t)0x00000400) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint32_t)0x00000500) /*!< PF[10] pin */
+
+/*!<*
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x00000000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x00001000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x00002000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint32_t)0x00003000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint32_t)0x00004000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register *****************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x0000000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x000000F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x00000F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0x0000F000) /*!< EXTI 15 configuration */
+
+/*!<*
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x00000000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x00000001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x00000002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint32_t)0x00000003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint32_t)0x00000004) /*!< PE[12] pin */
+
+/*!<*
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x00000000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x00000010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x00000020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint32_t)0x00000030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint32_t)0x00000040) /*!< PE[13] pin */
+
+/*!<*
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x00000000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x00000100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x00000200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint32_t)0x00000300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint32_t)0x00000400) /*!< PE[14] pin */
+
+/*!<*
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x00000000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x00001000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x00002000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint32_t)0x00003000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint32_t)0x00004000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register *****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM4 with Break Input of TIM1/15/16/17 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/15/16/17 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the PVD connection with TIM1/15/16/17 Break Input, as well as the PVDE and PLS[2:0] in the PWR_CR register */
+#define SYSCFG_CFGR2_BYP_ADDR_PAR ((uint32_t)0x00000010) /*!< Disables the adddress parity check on RAM */
+#define SYSCFG_CFGR2_SRAM_PE ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+
+/***************** Bit definition for SYSCFG_CFGR3 register *****************/
+#define SYSCFG_CFGR3_DMA_RMP ((uint32_t)0x000003FF) /*!< DMA remap mask */
+#define SYSCFG_CFGR3_SPI1_RX_DMA_RMP ((uint32_t)0x00000003) /*!< SPI1 RX DMA remap */
+#define SYSCFG_CFGR3_SPI1_RX_DMA_RMP_0 ((uint32_t)0x00000001) /*!< SPI1 RX DMA remap bit 0 */
+#define SYSCFG_CFGR3_SPI1_RX_DMA_RMP_1 ((uint32_t)0x00000002) /*!< SPI1 RX DMA remap bit 1 */
+#define SYSCFG_CFGR3_SPI1_TX_DMA_RMP ((uint32_t)0x0000000C) /*!< SPI1 TX DMA remap */
+#define SYSCFG_CFGR3_SPI1_TX_DMA_RMP_0 ((uint32_t)0x00000004) /*!< SPI1 TX DMA remap bit 0 */
+#define SYSCFG_CFGR3_SPI1_TX_DMA_RMP_1 ((uint32_t)0x00000008) /*!< SPI1 TX DMA remap bit 1 */
+#define SYSCFG_CFGR3_I2C1_RX_DMA_RMP ((uint32_t)0x00000030) /*!< I2C1 RX DMA remap */
+#define SYSCFG_CFGR3_I2C1_RX_DMA_RMP_0 ((uint32_t)0x00000010) /*!< I2C1 RX DMA remap bit 0 */
+#define SYSCFG_CFGR3_I2C1_RX_DMA_RMP_1 ((uint32_t)0x00000020) /*!< I2C1 RX DMA remap bit 1 */
+#define SYSCFG_CFGR3_I2C1_TX_DMA_RMP ((uint32_t)0x000000C0) /*!< I2C1 RX DMA remap */
+#define SYSCFG_CFGR3_I2C1_TX_DMA_RMP_0 ((uint32_t)0x00000040) /*!< I2C1 TX DMA remap bit 0 */
+#define SYSCFG_CFGR3_I2C1_TX_DMA_RMP_1 ((uint32_t)0x00000080) /*!< I2C1 TX DMA remap bit 1 */
+#define SYSCFG_CFGR3_ADC2_DMA_RMP ((uint32_t)0x00000300) /*!< ADC2 DMA remap */
+#define SYSCFG_CFGR3_ADC2_DMA_RMP_0 ((uint32_t)0x00000100) /*!< ADC2 DMA remap bit 0 */
+#define SYSCFG_CFGR3_ADC2_DMA_RMP_1 ((uint32_t)0x00000200) /*!< ADC2 DMA remap bit 1 */
+#define SYSCFG_CFGR3_TRIGGER_RMP ((uint32_t)0x00030000) /*!< Trigger remap mask */
+#define SYSCFG_CFGR3_DAC1_TRG3_RMP ((uint32_t)0x00010000) /*!< DAC1 TRG3 remap */
+#define SYSCFG_CFGR3_DAC1_TRG5_RMP ((uint32_t)0x00020000) /*!< DAC1 TRG5 remap */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CR1_UIFREMAP ((uint32_t)0x00000800) /*!<Update interrupt flag remap */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+#define TIM_CR2_OIS5 ((uint32_t)0x00010000) /*!<Output Idle state 4 (OC4 output) */
+#define TIM_CR2_OIS6 ((uint32_t)0x00040000) /*!<Output Idle state 4 (OC4 output) */
+
+#define TIM_CR2_MMS2 ((uint32_t)0x00F00000) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS2_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define TIM_CR2_MMS2_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define TIM_CR2_MMS2_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define TIM_CR2_MMS2_3 ((uint32_t)0x00800000) /*!<Bit 2 */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00010007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_SMCR_SMS_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_B2IF ((uint32_t)0x00000100) /*!<Break2 interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+#define TIM_SR_CC5IF ((uint32_t)0x00010000) /*!<Capture/Compare 5 interrupt Flag */
+#define TIM_SR_CC6IF ((uint32_t)0x00020000) /*!<Capture/Compare 6 interrupt Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+#define TIM_EGR_B2G ((uint32_t)0x00000100) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00010070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_OC1M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x01007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_OC2M_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00010070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_OC3M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x01007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_OC4M_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x00000000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x000000000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x000000000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x0000000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x000000000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x000000000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x000000000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x000000000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x000000000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x000000000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x000000000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x00000000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x000000001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x000000002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x000000004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x000000008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+#define TIM_CCER_CC5E ((uint32_t)0x00010000) /*!<Capture/Compare 5 output enable */
+#define TIM_CCER_CC5P ((uint32_t)0x00020000) /*!<Capture/Compare 5 output Polarity */
+#define TIM_CCER_CC6E ((uint32_t)0x00100000) /*!<Capture/Compare 6 output enable */
+#define TIM_CCER_CC6P ((uint32_t)0x00200000) /*!<Capture/Compare 6 output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+#define TIM_CNT_UIFCPY ((uint32_t)0x80000000) /*!<Update interrupt flag copy */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_CCR5 register *******************/
+#define TIM_CCR5_CCR5 ((uint32_t)0xFFFFFFFF) /*!<Capture/Compare 5 Value */
+#define TIM_CCR5_GC5C1 ((uint32_t)0x20000000) /*!<Group Channel 5 and Channel 1 */
+#define TIM_CCR5_GC5C2 ((uint32_t)0x40000000) /*!<Group Channel 5 and Channel 2 */
+#define TIM_CCR5_GC5C3 ((uint32_t)0x80000000) /*!<Group Channel 5 and Channel 3 */
+
+/******************* Bit definition for TIM_CCR6 register *******************/
+#define TIM_CCR6_CCR6 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 6 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable for Break1 */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity for Break1 */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+#define TIM_BDTR_BKF ((uint32_t)0x000F0000) /*!<Break Filter for Break1 */
+#define TIM_BDTR_BK2F ((uint32_t)0x00F00000) /*!<Break Filter for Break2 */
+
+#define TIM_BDTR_BK2E ((uint32_t)0x01000000) /*!<Break enable for Break2 */
+#define TIM_BDTR_BK2P ((uint32_t)0x02000000) /*!<Break Polarity for Break2 */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM16_OR register *********************/
+#define TIM16_OR_TI1_RMP ((uint32_t)0x000000C0) /*!<TI1_RMP[1:0] bits (TIM16 Input 1 remap) */
+#define TIM16_OR_TI1_RMP_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define TIM16_OR_TI1_RMP_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+
+/******************* Bit definition for TIM1_OR register *********************/
+#define TIM1_OR_ETR_RMP ((uint32_t)0x0000000F) /*!<ETR_RMP[3:0] bits (TIM1 ETR remap) */
+#define TIM1_OR_ETR_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM1_OR_ETR_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM1_OR_ETR_RMP_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM1_OR_ETR_RMP_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR3 register *******************/
+#define TIM_CCMR3_OC5FE ((uint32_t)0x00000004) /*!<Output Compare 5 Fast enable */
+#define TIM_CCMR3_OC5PE ((uint32_t)0x00000008) /*!<Output Compare 5 Preload enable */
+
+#define TIM_CCMR3_OC5M ((uint32_t)0x00010070) /*!<OC5M[2:0] bits (Output Compare 5 Mode) */
+#define TIM_CCMR3_OC5M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR3_OC5M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR3_OC5M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR3_OC5M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR3_OC5CE ((uint32_t)0x00000080) /*!<Output Compare 5 Clear Enable */
+
+#define TIM_CCMR3_OC6FE ((uint32_t)0x00000400) /*!<Output Compare 6 Fast enable */
+#define TIM_CCMR3_OC6PE ((uint32_t)0x00000800) /*!<Output Compare 6 Preload enable */
+
+#define TIM_CCMR3_OC6M ((uint32_t)0x01007000) /*!<OC6M[2:0] bits (Output Compare 6 Mode) */
+#define TIM_CCMR3_OC6M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR3_OC6M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR3_OC6M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR3_OC6M_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+#define TIM_CCMR3_OC6CE ((uint32_t)0x00008000) /*!<Output Compare 6 Clear Enable */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint32_t)0x000001FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint32_t)0x000001FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x0000007F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x00000040) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x00000080) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x0000007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x00000040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x00000180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x00000080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x00000100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x00000200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x00000001) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) (((INSTANCE) == ADC1) || \
+ ((INSTANCE) == ADC2))
+
+#define IS_ADC_MULTIMODE_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == ADC1))
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) (((INSTANCE) == ADC1_2_COMMON))
+
+/****************************** CAN Instances *********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN)
+
+/****************************** COMP Instances ********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP2) || \
+ ((INSTANCE) == COMP4) || \
+ ((INSTANCE) == COMP6))
+
+/******************** COMP Instances with switch on DAC1 Channel1 output ******/
+#define IS_COMP_DAC1SWITCH_INSTANCE(INSTANCE) (0)
+
+/******************** COMP Instances with window mode capability **************/
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) (0)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/****************************** DAC Instances *********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DAC1) || \
+ ((INSTANCE) == DAC2))
+
+#define IS_DAC_CHANNEL_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == DAC1) && \
+ (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == DAC2) && \
+ (((CHANNEL) == DAC_CHANNEL_1))))
+
+/****************************** DMA Instances *********************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5) || \
+ ((INSTANCE) == DMA1_Channel6) || \
+ ((INSTANCE) == DMA1_Channel7))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+/****************************** HRTIM Instances *********************************/
+#define IS_HRTIM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == HRTIM1))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** OPAMP Instances *******************************/
+#define IS_OPAMP_ALL_INSTANCE(INSTANCE) ((INSTANCE) == OPAMP2)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *******************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1))
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1))
+
+/******************* TIM Instances : All supported instances ******************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/******************* TIM Instances : at least 1 capture/compare channel *******/
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/****************** TIM Instances : at least 2 capture/compare channels *******/
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+/****************** TIM Instances : at least 3 capture/compare channels *******/
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+/****************** TIM Instances : at least 4 capture/compare channels *******/
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+/****************** TIM Instances : at least 5 capture/compare channels *******/
+#define IS_TIM_CC5_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+/****************** TIM Instances : at least 6 capture/compare channels *******/
+#define IS_TIM_CC6_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+/************************** TIM Instances : Advanced-control timers ***********/
+
+/****************** TIM Instances : supporting clock selection ****************/
+#define IS_TIM_CLOCK_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+/****************** TIM Instances : supporting external clock mode 1 for ETRF input */
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+/****************** TIM Instances : supporting external clock mode 2 **********/
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+/****************** TIM Instances : supporting external clock mode 1 for TIX inputs*/
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+/****************** TIM Instances : supporting internal trigger inputs(ITRX) *******/
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+/****************** TIM Instances : supporting OCxREF clear *******************/
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+/****************** TIM Instances : supporting encoder interface **************/
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+/****************** TIM Instances : supporting Hall interface *****************/
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+/****************** TIM Instances : supporting input XOR function *************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+/****************** TIM Instances : supporting master mode ********************/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+/****************** TIM Instances : supporting slave mode *********************/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+/****************** TIM Instances : supporting synchronization ****************/
+#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+/****************** TIM Instances : supporting 32 bits counter ****************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+/****************** TIM Instances : supporting DMA burst **********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/****************** TIM Instances : supporting the break function *************/
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/****************** TIM Instances : supporting input/output channel(s) ********/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+/****************** TIM Instances : supporting complementary output(s) ********/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+/****************** TIM Instances : supporting counting mode selection ********/
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3))
+
+/****************** TIM Instances : supporting repetition counter *************/
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/****************** TIM Instances : supporting clock division *****************/
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/****************** TIM Instances : supporting 2 break inputs *****************/
+#define IS_TIM_BKIN2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+/****************** TIM Instances : supporting ADC triggering through TRGO2 ***/
+#define IS_TIM_TRGO2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+/****************** TIM Instances : supporting DMA generation on Update events*/
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/****************** TIM Instances : supporting DMA generation on Capture/Compare events */
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/****************** TIM Instances : supporting commutation event generation ***/
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+/****************** TIM Instances : supporting remapping capability ***********/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM16))
+
+/****************** TIM Instances : supporting combined 3-phase PWM mode ******/
+#define IS_TIM_COMBINED3PHASEPWM_INSTANCE(INSTANCE) \
+ (((INSTANCE) == TIM1))
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** USART Instances : Auto Baud Rate detection ****************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : LIN mode **********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/******************** UART Instances : Wake-up from Stop mode **********************/
+#define IS_UART_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Auto Baud Rate detection *****************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************** UART Instances : Driver Enable ****************************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) ((INSTANCE) == USART1)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F3xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F3 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+
+#define ADC1_IRQn ADC1_2_IRQn
+#define USB_HP_CAN_TX_IRQn CAN_TX_IRQn
+#define USB_LP_CAN_RX0_IRQn CAN_RX0_IRQn
+#define TIM15_IRQn TIM1_BRK_TIM15_IRQn
+#define TIM16_IRQn TIM1_UP_TIM16_IRQn
+#define TIM17_IRQn TIM1_TRG_COM_TIM17_IRQn
+#define COMP_IRQn COMP2_IRQn
+#define COMP1_2_3_IRQn COMP2_IRQn
+#define COMP1_2_IRQn COMP2_IRQn
+#define COMP4_5_6_IRQn COMP4_6_IRQn
+#define TIM6_DAC_IRQn TIM6_DAC1_IRQn
+
+/* Aliases for __IRQHandler */
+#define ADC1_IRQHandler ADC1_2_IRQHandler
+#define USB_HP_CAN_TX_IRQHandler CAN_TX_IRQHandler
+#define USB_LP_CAN_RX0_IRQHandler CAN_RX0_IRQHandler
+#define TIM15_IRQHandler TIM1_BRK_TIM15_IRQHandler
+#define TIM16_IRQHandler TIM1_UP_TIM16_IRQHandler
+#define TIM17_IRQHandler TIM1_TRG_COM_TIM17_IRQHandler
+#define COMP_IRQHandler COMP2_IRQHandler
+#define COMP1_2_3_IRQHandler COMP2_IRQHandler
+#define COMP1_2_IRQHandler COMP2_IRQHandler
+#define COMP4_5_6_IRQHandler COMP4_6_IRQHandler
+#define TIM6_DAC_IRQHandler TIM6_DAC1_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F334x8_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,229 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx.h
+ * @author MCD Application Team
+ * @version V2.0.1
+ * @date 18-June-2014
+ * @brief CMSIS STM32F3xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F3xx device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx
+ * @{
+ */
+
+#ifndef __STM32F3xx_H
+#define __STM32F3xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F301x8) && !defined (STM32F318xx) && \
+ !defined (STM32F302x8) && !defined (STM32F302xC) && \
+ !defined (STM32F303x8) && \
+ !defined (STM32F303xC) && !defined (STM32F358xx) && \
+ !defined (STM32F373xC) && !defined (STM32F378xx) && \
+ !defined (STM32F334x8) && !defined (STM32F328xx)
+ /* #define STM32F301x8 */ /*!< STM32F301K6, STM32F301K8, STM32F301C6, STM32F301C8,
+ STM32F301R6 and STM32F301R8 Devices */
+ /* #define STM32F302x8 */ /*!< STM32F302K6, STM32F302K8, STM32F302C6, STM32F302C8,
+ STM32F302R6 and STM32F302R8 Devices */
+ /* #define STM32F302xC */ /*!< STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC, STM32F302VB and STM32F302VC Devices */
+ /* #define STM32F303x8 */ /*!< STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8,
+ STM32F303R6 and STM32F303R8 Devices */
+ /* #define STM32F303xC */ /*!< STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC, STM32F303VB and STM32F303VC Devices */
+ /* #define STM32F373xC */ /*!< STM32F373C8, STM32F373CB, STM32F373CC, STM32F373R8, STM32F373RB, STM32F373RC,
+ STM32F373V8, STM32F373VB and STM32F373VC Devices */
+#define STM32F334x8 /*!< STM32F334C4, STM32F334C6, STM32F334C8, STM32F334R4, STM32F334R6 and STM32F334R8 Devices */
+ /* #define STM32F318xx */ /*!< STM32F318K8, STM32F318C8: STM32F301x8 with regulator off: STM32F318xx Devices */
+ /* #define STM32F328xx */ /*!< STM32F328C8, STM32F328R8: STM32F334x8 with regulator off: STM32F328xx Devices */
+ /* #define STM32F358xx */ /*!< STM32F358CC, STM32F358RC, STM32F358VC: STM32F303xC with regulator off: STM32F358xx Devices */
+ /* #define STM32F378xx */ /*!< STM32F378CC, STM32F378RC, STM32F378VC: STM32F373xC with regulator off: STM32F378xx Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.0.1
+ */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+ |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F301x8)
+ #include "stm32f301x8.h"
+#elif defined(STM32F302x8)
+ #include "stm32f302x8.h"
+#elif defined(STM32F302xC)
+ #include "stm32f302xc.h"
+#elif defined(STM32F303x8)
+ #include "stm32f303x8.h"
+#elif defined(STM32F303xC)
+ #include "stm32f303xc.h"
+#elif defined(STM32F373xC)
+ #include "stm32f373xc.h"
+#elif defined(STM32F334x8)
+ #include "stm32f334x8.h"
+#elif defined(STM32F318xx)
+ #include "stm32f318xx.h"
+#elif defined(STM32F328xx)
+ #include "stm32f328xx.h"
+#elif defined(STM32F358xx)
+ #include "stm32f358xx.h"
+#elif defined(STM32F378xx)
+ #include "stm32f378xx.h"
+#else
+ #error "Please select first the target STM32F3xx device used in your application (in stm32f3xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f3xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F3xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,675 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_H
+#define __STM32F3xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_conf.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SYSCFG_BitAddress_AliasRegion
+ * @brief SYSCFG registers bit address in the alias region
+ * @{
+ */
+/* ------------ SYSCFG registers bit address in the alias region -------------*/
+#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
+/* --- CFGR2 Register ---*/
+/* Alias word address of BYP_ADDR_PAR bit */
+#define CFGR2_OFFSET (SYSCFG_OFFSET + 0x18)
+#define BYPADDRPAR_BitNumber 0x04
+#define CFGR2_BYPADDRPAR_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (BYPADDRPAR_BitNumber * 4))
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_Remapping
+ * Elements values convention: 0xXXYYYYYY
+ * - YYYYYY : Position in the register
+ * - XX : Register index
+ * - 00: CFGR1 register in SYSCFG
+ * - 01: CFGR3 register in SYSCFG (not available on STM32F373xC/STM32F378xx devices)
+ * @{
+ */
+#define HAL_REMAPDMA_ADC24_DMA2_CH34 ((uint32_t)0x00000100) /*!< ADC24 DMA remap (STM32F303xB/C/E and STM32F358xx devices)
+ 1: Remap (ADC24 DMA requests mapped on DMA2 channels 3 and 4) */
+#define HAL_REMAPDMA_TIM16_DMA1_CH6 ((uint32_t)0x00000800) /*!< TIM16 DMA request remap
+ 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA1 channel 6) */
+#define HAL_REMAPDMA_TIM17_DMA1_CH7 ((uint32_t)0x00001000) /*!< TIM17 DMA request remap
+ 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA1 channel 7) */
+#define HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3 ((uint32_t)0x00002000) /*!< TIM6 and DAC channel1 DMA remap (STM32F303xB/C/E and STM32F358xx devices)
+ 1: Remap (TIM6_UP and DAC_CH1 DMA requests mapped on DMA1 channel 3) */
+#define HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4 ((uint32_t)0x00004000) /*!< TIM7 and DAC channel2 DMA remap (STM32F303xB/C/E and STM32F358xx devices)
+ 1: Remap (TIM7_UP and DAC_CH2 DMA requests mapped on DMA1 channel 4) */
+#define HAL_REMAPDMA_DAC2_CH1_DMA1_CH5 ((uint32_t)0x00008000) /*!< DAC2 channel1 DMA remap (STM32F303x4/6/8 devices only)
+ 1: Remap (DAC2_CH1 DMA requests mapped on DMA1 channel 5) */
+#define HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5 ((uint32_t)0x00008000) /*!< DAC2 channel1 DMA remap (STM32F303x4/6/8 devices only)
+ 1: Remap (DAC2_CH1 DMA requests mapped on DMA1 channel 5) */
+#if defined(SYSCFG_CFGR3_DMA_RMP)
+#if !defined(HAL_REMAP_CFGR3_MASK)
+#define HAL_REMAP_CFGR3_MASK ((uint32_t)0x01000000)
+#endif
+
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH2 ((uint32_t)0x01000003) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH4 ((uint32_t)0x01000001) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 4 */
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH6 ((uint32_t)0x01000002) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 6 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH3 ((uint32_t)0x0100000C) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 3 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH5 ((uint32_t)0x01000004) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 5 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH7 ((uint32_t)0x01000008) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 7 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH7 ((uint32_t)0x01000030) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 7 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH3 ((uint32_t)0x01000010) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 3 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH5 ((uint32_t)0x01000020) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 5 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH6 ((uint32_t)0x010000C0) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 6 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH2 ((uint32_t)0x01000040) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH4 ((uint32_t)0x01000080) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 4 */
+#define HAL_REMAPDMA_ADC2_DMA1_CH2 ((uint32_t)0x01000100) /*!< ADC2 DMA remap
+ x0: No remap (ADC2 on DMA2)
+ 10: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_ADC2_DMA1_CH4 ((uint32_t)0x01000300) /*!< ADC2 DMA remap
+ 11: Map on DMA1 channel 4 */
+#endif /* SYSCFG_CFGR3_DMA_RMP */
+
+#if defined(SYSCFG_CFGR3_DMA_RMP) && defined(SYSCFG_CFGR1_DMA_RMP)
+#define IS_HAL_REMAPDMA(RMP) ((((RMP) & HAL_REMAPDMA_ADC24_DMA2_CH34) == HAL_REMAPDMA_ADC24_DMA2_CH34) || \
+ (((RMP) & HAL_REMAPDMA_TIM16_DMA1_CH6) == HAL_REMAPDMA_TIM16_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_TIM17_DMA1_CH7) == HAL_REMAPDMA_TIM17_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) == HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) == HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH2) == HAL_REMAPDMA_SPI1_RX_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH4) == HAL_REMAPDMA_SPI1_RX_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH6) == HAL_REMAPDMA_SPI1_RX_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH3) == HAL_REMAPDMA_SPI1_TX_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH5) == HAL_REMAPDMA_SPI1_TX_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH7) == HAL_REMAPDMA_SPI1_TX_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH7) == HAL_REMAPDMA_I2C1_RX_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH3) == HAL_REMAPDMA_I2C1_RX_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH5) == HAL_REMAPDMA_I2C1_RX_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH6) == HAL_REMAPDMA_I2C1_TX_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH2) == HAL_REMAPDMA_I2C1_TX_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH4) == HAL_REMAPDMA_I2C1_TX_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_ADC2_DMA1_CH2) == HAL_REMAPDMA_ADC2_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_ADC2_DMA1_CH4) == HAL_REMAPDMA_ADC2_DMA1_CH4))
+#elif defined(SYSCFG_CFGR1_DMA_RMP)
+#define IS_HAL_REMAPDMA(RMP) ((((RMP) & HAL_REMAPDMA_ADC24_DMA2_CH34) == HAL_REMAPDMA_ADC24_DMA2_CH34) || \
+ (((RMP) & HAL_REMAPDMA_TIM16_DMA1_CH6) == HAL_REMAPDMA_TIM16_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_TIM17_DMA1_CH7) == HAL_REMAPDMA_TIM17_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) == HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) == HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5))
+#endif /* SYSCFG_CFGR3_DMA_RMP && SYSCFG_CFGR1_DMA_RMP*/
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+/** @defgroup HAL_Trigger_Remapping
+ * Elements values convention: 0xXXYYYYYY
+ * - YYYYYY : Position in the register
+ * - XX : Register index
+ * - 00: CFGR1 register in SYSCFG
+ * - 01: CFGR3 register in SYSCFG
+ * @{
+ */
+#define HAL_REMAPTRIGGER_DAC1_TRIG ((uint32_t)0x00000080) /*!< DAC trigger remap (when TSEL = 001 on STM32F303xB/C and STM32F358xx devices)
+ 0: No remap (DAC trigger is TIM8_TRGO)
+ 1: Remap (DAC trigger is TIM3_TRGO) */
+#define HAL_REMAPTRIGGER_TIM1_ITR3 ((uint32_t)0x00000040) /*!< TIM1 ITR3 trigger remap
+ 0: No remap
+ 1: Remap (TIM1_TRG3 = TIM17_OC) */
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+#if !defined(HAL_REMAP_CFGR3_MASK)
+#define HAL_REMAP_CFGR3_MASK ((uint32_t)0x01000000)
+#endif
+#define HAL_REMAPTRIGGER_DAC1_TRIG3 ((uint32_t)0x01010000) /*!< DAC1_CH1 / DAC1_CH2 Trigger remap
+ 0: Remap (DAC trigger is TIM15_TRGO)
+ 1: Remap (DAC trigger is HRTIM1_DAC1_TRIG1) */
+#define HAL_REMAPTRIGGER_DAC1_TRIG5 ((uint32_t)0x01020000) /*!< DAC1_CH1 / DAC1_CH2 Trigger remap
+ 0: No remap
+ 1: Remap (DAC trigger is HRTIM1_DAC1_TRIG2) */
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+#define IS_HAL_REMAPTRIGGER(RMP) ((((RMP) & HAL_REMAPTRIGGER_DAC1) == HAL_REMAPTRIGGER_DAC1) || \
+ (((RMP) & HAL_REMAPTRIGGER_TIM1_ITR3) == HAL_REMAPTRIGGER_TIM1_ITR3) || \
+ (((RMP) & HAL_REMAPTRIGGER_DAC1_TRIG3) == HAL_REMAPTRIGGER_DAC1_TRIG3) || \
+ (((RMP) & HAL_REMAPTRIGGER_DAC1_TRIG5) == HAL_REMAPTRIGGER_DAC1_TRIG5))
+#else
+#define IS_HAL_REMAPTRIGGER(RMP) ((((RMP) & HAL_REMAPTRIGGER_DAC1) == HAL_REMAPTRIGGER_DAC1) || \
+ (((RMP) & HAL_REMAPTRIGGER_TIM1_ITR3) == HAL_REMAPTRIGGER_TIM1_ITR3))
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FastModePlus_I2C
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_I2C1_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 ((uint32_t)SYSCFG_CFGR1_I2C1_FMP) /*!< I2C1 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C1 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C1 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C1_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C2_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 ((uint32_t)SYSCFG_CFGR1_I2C2_FMP) /*!< I2C2 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C2 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C2 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C2_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C3_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 ((uint32_t)SYSCFG_CFGR1_I2C3_FMP) /*!< I2C3 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C3 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C3 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C3_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB6_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 ((uint32_t)SYSCFG_CFGR1_I2C_PB6_FMP) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB6 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB6 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_PB6_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB7_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 ((uint32_t)SYSCFG_CFGR1_I2C_PB7_FMP) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB7 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB7 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_PB7_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB8_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 ((uint32_t)SYSCFG_CFGR1_I2C_PB8_FMP) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB8 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB8 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB9_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 ((uint32_t)SYSCFG_CFGR1_I2C_PB9_FMP) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB9 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB9 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C1_FMP) && defined(SYSCFG_CFGR1_I2C2_FMP) && defined(SYSCFG_CFGR1_I2C3_FMP)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) ((((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C1) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C2) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C3) == HAL_SYSCFG_FASTMODEPLUS_I2C3) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB9) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#elif defined(SYSCFG_CFGR1_I2C1_FMP) && defined(SYSCFG_CFGR1_I2C2_FMP)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) ((((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C1) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C2) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB9) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#elif defined(SYSCFG_CFGR1_I2C1_FMP)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) ((((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C1) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB9) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#endif /* SYSCFG_CFGR1_I2C1_FMP && SYSCFG_CFGR1_I2C2_FMP && SYSCFG_CFGR3_I2C1_FMP */
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/* CCM-SRAM defined */
+/** @defgroup HAL_Page_Write_Protection
+ * @{
+ */
+#define HAL_SYSCFG_WP_PAGE0 (SYSCFG_RCR_PAGE0) /*!< ICODE SRAM Write protection page 0 */
+#define HAL_SYSCFG_WP_PAGE1 (SYSCFG_RCR_PAGE1) /*!< ICODE SRAM Write protection page 1 */
+#define HAL_SYSCFG_WP_PAGE2 (SYSCFG_RCR_PAGE2) /*!< ICODE SRAM Write protection page 2 */
+#define HAL_SYSCFG_WP_PAGE3 (SYSCFG_RCR_PAGE3) /*!< ICODE SRAM Write protection page 3 */
+#if defined(SYSCFG_RCR_PAGE4)
+/* More than 4KB CCM-SRAM defined */
+#define HAL_SYSCFG_WP_PAGE4 (SYSCFG_RCR_PAGE4) /*!< ICODE SRAM Write protection page 4 */
+#define HAL_SYSCFG_WP_PAGE5 (SYSCFG_RCR_PAGE5) /*!< ICODE SRAM Write protection page 5 */
+#define HAL_SYSCFG_WP_PAGE6 (SYSCFG_RCR_PAGE6) /*!< ICODE SRAM Write protection page 6 */
+#define HAL_SYSCFG_WP_PAGE7 (SYSCFG_RCR_PAGE7) /*!< ICODE SRAM Write protection page 7 */
+#endif /* SYSCFG_RCR_PAGE4 */
+
+#if defined(SYSCFG_RCR_PAGE4)
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0) && ((__PAGE__) <= SYSCFG_RCR_PAGE7))
+#else
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0) && ((__PAGE__) <= SYSCFG_RCR_PAGE3))
+#endif
+/**
+ * @}
+ */
+#endif /* SYSCFG_RCR_PAGE0 */
+
+/** @defgroup HAL_SYSCFG_Interrupts
+ * @{
+ */
+#define HAL_SYSCFG_IT_FPU_IOC (SYSCFG_CFGR1_FPU_IE_0) /*!< Floating Point Unit Invalid operation Interrupt */
+#define HAL_SYSCFG_IT_FPU_DZC (SYSCFG_CFGR1_FPU_IE_1) /*!< Floating Point Unit Divide-by-zero Interrupt */
+#define HAL_SYSCFG_IT_FPU_UFC (SYSCFG_CFGR1_FPU_IE_2) /*!< Floating Point Unit Underflow Interrupt */
+#define HAL_SYSCFG_IT_FPU_OFC (SYSCFG_CFGR1_FPU_IE_3) /*!< Floating Point Unit Overflow Interrupt */
+#define HAL_SYSCFG_IT_FPU_IDC (SYSCFG_CFGR1_FPU_IE_4) /*!< Floating Point Unit Input denormal Interrupt */
+#define HAL_SYSCFG_IT_FPU_IXC (SYSCFG_CFGR1_FPU_IE_5) /*!< Floating Point Unit Inexact Interrupt */
+
+#define IS_HAL_SYSCFG_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_0) == SYSCFG_CFGR1_FPU_IE_0) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_1) == SYSCFG_CFGR1_FPU_IE_1) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_2) == SYSCFG_CFGR1_FPU_IE_2) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_3) == SYSCFG_CFGR1_FPU_IE_3) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_4) == SYSCFG_CFGR1_FPU_IE_4) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_5) == SYSCFG_CFGR1_FPU_IE_5))
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_FREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_UNFREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_FREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_UNFREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_FREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_UNFREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_FREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_UNFREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_FREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_UNFREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_FREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_UNFREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#define __HAL_FREEZE_TIM4_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_UNFREEZE_TIM4_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#define __HAL_FREEZE_TIM5_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_UNFREEZE_TIM5_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM5_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_FREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_UNFREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_FREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_UNFREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#define __HAL_FREEZE_TIM8_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_UNFREEZE_TIM8_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#define __HAL_FREEZE_TIM12_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_UNFREEZE_TIM12_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#define __HAL_FREEZE_TIM13_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_UNFREEZE_TIM13_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_FREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_UNFREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_FREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#define __HAL_UNFREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_FREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#define __HAL_UNFREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_FREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#define __HAL_UNFREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM19_STOP)
+#define __HAL_FREEZE_TIM19_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#define __HAL_UNFREEZE_TIM19_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#endif /* */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */
+
+
+#if defined(SYSCFG_CFGR1_MEM_MODE)
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+#endif /* SYSCFG_CFGR1_MEM_MODE */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0)
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1)
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE)
+/** @brief No Encoder mode
+ */
+#define __HAL_REMAPENCODER_NONE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE))
+#endif /* SYSCFG_CFGR1_ENCODER_MODE */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_0)
+/** @brief Encoder mode : TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ */
+#define __HAL_REMAPENCODER_TIM2() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_ENCODER_MODE_0; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_1)
+/** @brief Encoder mode : TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ */
+#define __HAL_REMAPENCODER_TIM3() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_ENCODER_MODE_1; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_1 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_0) && defined(SYSCFG_CFGR1_ENCODER_MODE_1)
+/** @brief Encoder mode : TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 (STM32F303xB/C and STM32F358xx devices)
+ */
+#define __HAL_REMAPENCODER_TIM4() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_ENCODER_MODE_0 | SYSCFG_CFGR1_ENCODER_MODE_1); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_0 && SYSCFG_CFGR1_ENCODER_MODE_1 */
+
+#if defined(SYSCFG_CFGR3_DMA_RMP) && defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__: This parameter can be a value of @ref HAL_DMA_Remapping
+ */
+#define __HAL_REMAPDMA_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ (((__DMA_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 |= ((__DMA_REMAP__) & ~HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 |= (__DMA_REMAP__))); \
+ }while(0)
+#define __HAL_REMAPDMA_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ (((__DMA_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 &= (~(__DMA_REMAP__) | HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 &= ~(__DMA_REMAP__))); \
+ }while(0)
+#elif defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__: This parameter can be a value of @ref HAL_DMA_Remapping
+ */
+#define __HAL_REMAPDMA_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 |= (__DMA_REMAP__); \
+ }while(0)
+#define __HAL_REMAPDMA_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \
+ }while(0)
+#endif /* SYSCFG_CFGR3_DMA_RMP || SYSCFG_CFGR1_DMA_RMP */
+
+/** @brief Fast mode Plus driving capability enable/disable macros
+ * @param __FASTMODEPLUS__: This parameter can be a value of @ref HAL_FastModePlus_I2C
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \
+ SYSCFG->CFGR1 |= (__FASTMODEPLUS__); \
+ }while(0)
+
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \
+ SYSCFG->CFGR1 &= ~(__FASTMODEPLUS__); \
+ }while(0)
+
+/** @brief SYSCFG interrupt enable/disable macros
+ * @param __INTERRUPT__: This parameter can be a value of @ref HAL_SYSCFG_Interrupts
+ */
+#define __HAL_SYSCFG_INTERRUPT_ENABLE(__INTERRUPT__) do {assert_param(IS_HAL_SYSCFG_INTERRUPT((__INTERRUPT__))); \
+ SYSCFG->CFGR1 |= (__INTERRUPT__); \
+ }while(0)
+
+#define __HAL_SYSCFG_INTERRUPT_DISABLE(__INTERRUPT__) do {assert_param(IS_HAL_SYSCFG_INTERRUPT((__INTERRUPT__))); \
+ SYSCFG->CFGR1 &= ~(__INTERRUPT__); \
+ }while(0)
+
+#if defined(SYSCFG_CFGR1_USB_IT_RMP)
+/** @brief USB interrupt remapping enable/disable macros
+ */
+#define __HAL_REMAPINTERRUPT_USB_ENABLE() (SYSCFG->CFGR1 |= (SYSCFG_CFGR1_USB_IT_RMP))
+#define __HAL_REMAPINTERRUPT_USB_DISABLE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_USB_IT_RMP))
+#endif /* SYSCFG_CFGR1_USB_IT_RMP */
+
+#if defined(SYSCFG_CFGR1_VBAT)
+/** @brief SYSCFG interrupt enable/disable macros
+ */
+#define __HAL_SYSCFG_VBAT_MONITORING_ENABLE() (SYSCFG->CFGR1 |= (SYSCFG_CFGR1_VBAT))
+#define __HAL_SYSCFG_VBAT_MONITORING_DISABLE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_VBAT))
+#endif /* SYSCFG_CFGR1_VBAT */
+
+#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
+/** @brief SYSCFG Break Lockup lock
+ * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
+ }while(0)
+#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
+
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+/** @brief SYSCFG Break PVD lock
+ * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
+ }while(0)
+#endif /* SYSCFG_CFGR2_PVD_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+/** @brief SYSCFG Break SRAM PARITY lock
+ * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \
+ }while(0)
+#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+/** @brief Trigger remapping enable/disable macros
+ * @param __TRIGGER_REMAP__: This parameter can be a value of @ref HAL_Trigger_Remapping
+ */
+#define __HAL_REMAPTRIGGER_ENABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (((__TRIGGER_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 |= ((__TRIGGER_REMAP__) & ~HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 |= (__TRIGGER_REMAP__))); \
+ }while(0)
+#define __HAL_REMAPTRIGGER_DISABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (((__TRIGGER_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 &= (~(__TRIGGER_REMAP__) | HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 &= ~(__TRIGGER_REMAP__))); \
+ }while(0)
+#else
+/** @brief Trigger remapping enable/disable macros
+ * @param __TRIGGER_REMAP__: This parameter can be a value of @ref HAL_Trigger_Remapping
+ */
+#define __HAL_REMAPTRIGGER_ENABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (SYSCFG->CFGR1 |= (__TRIGGER_REMAP__)); \
+ }while(0)
+#define __HAL_REMAPTRIGGER_DISABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (SYSCFG->CFGR1 &= ~(__TRIGGER_REMAP__)); \
+ }while(0)
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+
+#if defined(SYSCFG_CFGR2_BYP_ADDR_PAR)
+/**
+ * @brief Parity check on RAM disable macro
+ * @note Disabling the parity check on RAM locks the configuration bit.
+ * To re-enable the parity check on RAM perform a system reset.
+ */
+#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (*(__IO uint32_t *) CFGR2_BYPADDRPAR_BB = (uint32_t)0x00000001)
+#endif /* SYSCFG_CFGR2_BYP_ADDR_PAR */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/** @brief CCM RAM page write protection enable macro
+ * @param __PAGE_WP__: This parameter can be a value of @ref HAL_Page_Write_Protection
+ * @note write protection can only be disabled by a system reset
+ */
+#define __HAL_SYSCFG_SRAM_WRP_ENABLE(__PAGE_WP__) do {assert_param(IS_HAL_SYSCFG_WP_PAGE((__PAGE_WP__))); \
+ SYSCFG->RCR |= (__PAGE_WP__); \
+ }while(0)
+#endif /* SYSCFG_RCR_PAGE0 */
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_EnableDBGSleepMode(void);
+void HAL_DisableDBGSleepMode(void);
+void HAL_EnableDBGStopMode(void);
+void HAL_DisableDBGStopMode(void);
+void HAL_EnableDBGStandbyMode(void);
+void HAL_DisableDBGStandbyMode(void);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_adc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,178 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_ADC_H
+#define __STM32F3xx_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+#include "stm32f3xx_hal_adc_ex.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL ADC state machine: ADC States structure definition
+ */
+typedef enum
+{
+ HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
+ HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
+ HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */
+ HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
+ HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
+ HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
+ HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */
+ HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */
+ HAL_ADC_STATE_AWD = 0x06, /*!< ADC state analog watchdog (main analog watchdog, present on all STM32 devices) */
+ HAL_ADC_STATE_AWD2 = 0x07, /*!< ADC state analog watchdog (additional analog watchdog, present only on STM32F3 devices) */
+ HAL_ADC_STATE_AWD3 = 0x08, /*!< ADC state analog watchdog (additional analog watchdog, present only on STM32F3 devices) */
+}HAL_ADC_StateTypeDef;
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct __ADC_HandleTypeDef
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfConversionRank ; /*!< ADC conversion rank counter */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Macro
+ * @{
+ */
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/**
+ * @}
+ */
+
+
+/* Include ADC HAL Extension module */
+#include "stm32f3xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+
+/* IO operation functions *****************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+/* Non-blocking mode: DMA */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+
+/* Peripheral State functions *************************************************/
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_adc_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,3218 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_ADC_EX_H
+#define __STM32F3xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+struct __ADC_HandleTypeDef;
+
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8) || defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+/**
+ * @brief Structure definition of ADC initialization and regular group
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, DataAlign,
+ * ScanConvMode, EOCSelection, LowPowerAutoWait.
+ * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv, DMAContinuousRequests, Overrun.
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled
+ * - For all parameters except 'LowPowerAutoWait' and 'DMAContinuousRequests': ADC enabled without conversion on going on regular group.
+ * - For parameters 'LowPowerAutoWait' and 'DMAContinuousRequests': ADC enabled without conversion on going on regular and injected groups.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fullfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from AHB clock or asynchronous clock derived from ADC dedicated PLL 72MHz) and clock prescaler.
+ The clock is common for all the ADCs.
+ This parameter can be a value of @ref ADCEx_ClockPrescaler
+ Note: In case of usage of channels on injected group, ADC frequency should be low than AHB clock frequency /4 for resolution 12 or 10 bits,
+ AHB clock frequency /3 for resolution 8 bits, AHB clock frequency /2 for resolution 6 bits.
+ Note: In case of usage of the ADC dedicated PLL clock, this clock must be preliminarily enabled and prescaler set at RCC top level.
+ Note: This parameter can be modified only if all ADCs of the common ADC group are disabled (for products with several ADCs) */
+ uint32_t Resolution; /*!< Configures the ADC resolution.
+ This parameter can be a value of @ref ADCEx_Resolution */
+ uint32_t DataAlign; /*!< Specifies ADC data alignment to right (for resolution 12 bits: MSB on register bit 11 and LSB on register bit 0) (default setting)
+ or to left (for resolution 12 bits, if offset disabled: MSB on register bit 15 and LSB on register bit 4, if offset enabled: MSB on register bit 14 and LSB on register bit 3).
+ See reference manual for alignments with other resolutions.
+ This parameter can be a value of @ref ADCEx_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+ Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+ If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+ Scan direction is upward: from rank1 to rank 'n'.
+ This parameter can be a value of @ref ADCEx_Scan_mode */
+ uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+ This parameter can be a value of @ref ADCEx_EOCSelection. */
+ uint32_t LowPowerAutoWait; /*!< Selects the dynamic low power Auto Delay: new conversion start only when the previous
+ conversion (for regular group) or previous sequence (for injected group) has been treated by user software.
+ This feature automatically adapts the speed of ADC to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they have to clear immediately the EOC flag to free the IRQ vector sequencer.
+ Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed
+ and use HAL_ADC_GetValue() to retrieve conversion result and trig another conversion. */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+ To use the regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16.
+ Note: This parameter must be modified when no conversion is on going on regular group (ADC disabled, or ADC enabled without continuous mode or external trigger that could lauch a conversion). */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+ If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Regular
+ Caution: For devices with several ADCs, external trigger source is common to ADC common group (for example: ADC1&ADC2, ADC3&ADC4, if available) */
+ uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
+ If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Regular */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+ or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+ Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could lauch a conversion). */
+ uint32_t Overrun; /*!< Select the behaviour in case of overrun: data overwritten (default) or preserved.
+ This parameter is for regular group only.
+ This parameter can be a value of @ref ADCEx_Overrun
+ Note: Case of overrun set to data preserved and usage with end on conversion interruption (HAL_Start_IT()): ADC IRQ handler has to clear end of conversion flags, this induces the release of the preserved data. If needed, this data can be saved into function HAL_ADC_ConvCpltCallback() (called before end of conversion flags clear).
+ Note: Error reporting in function of conversion mode:
+ - Usage with ADC conversion by polling for event or interruption: Error is reported only if overrun is set to data preserved. If overrun is set to data overwritten, user can willingly not read the conversion data each time, this is not considered as an erroneous case.
+ - Usage with ADC conversion by DMA: Error is reported whatever overrun setting (DMA is expected to process all data from data register, any data missed would be abnormal). */
+}ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'SingleDiff')
+ * - For all except parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on regular group.
+ * - For parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on regular and injected groups.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADCEx_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t Rank; /*!< Specifies the rank in the regular group sequencer.
+ This parameter can be a value of @ref ADCEx_regular_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t SamplingTime; /*!< Specifies the sampling time to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+ This parameter can be a value of @ref ADCEx_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (Vbat/VrefInt/TempSensor),
+ the recommended sampling time is at least 2.2us (sampling time setting to be chosen in function of ADC clock frequency) */
+ uint32_t SingleDiff; /*!< Selection of single-ended or differential input.
+ In differential mode: Differential measurement is between the selected channel 'i' (positive input) and channel 'i+1' (negative input).
+ Only channel 'i' has to be configured, channel 'i+1' is configured automatically.
+ This parameter must be a value of @ref ADCEx_SingleDifferential
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: Channels 1 to 14 are available in differential mode. Channels 15, 16, 17, 18 can be used only in single-ended mode.
+ Note: When configuring a channel 'i' in differential mode, the channel 'i+1' is not usable separately.
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) */
+ uint32_t OffsetNumber; /*!< Selects the offset number
+ This parameter can be a value of @ref ADCEx_OffsetNumber
+ Caution: Only one channel is allowed per channel. If another channel was on this offset number, the offset will be changed to the new channel */
+ uint32_t Offset; /*!< Defines the offset to be subtracted from the raw converted data when convert channels.
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively.
+ Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could lauch a conversion). */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC injected group and ADC channel for injected group
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime , InjectedSingleDiff, InjectedOffsetNumber, InjectedOffset
+ * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+ * AutoInjectedConv, QueueInjectedContext, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+ * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'InjectedSingleDiff')
+ * - For parameters 'InjectedDiscontinuousConvMode', 'QueueInjectedContext': ADC enabled without conversion on going on injected group.
+ * - For parameters 'InjectedSamplingTime', 'InjectedOffset', 'InjectedOffsetNumber', 'AutoInjectedConv': ADC enabled without conversion on going on regular and injected groups.
+ * - For parameters 'InjectedChannel', 'InjectedRank', 'InjectedNbrOfConversion', 'ExternalTrigInjecConv', 'ExternalTrigInjecConvEdge': ADC enabled and while conversion on going on regular and injected groups.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Configure the ADC injected channel
+ This parameter can be a value of @ref ADCEx_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t InjectedRank; /*!< The rank in the regular group sequencer
+ This parameter must be a value of @ref ADCEx_injected_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t InjectedSamplingTime; /*!< The sample time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+ This parameter can be a value of @ref ADCEx_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (Vbat/VrefInt/TempSensor),
+ the recommended sampling time is at least 2.2us (sampling time setting to be chosen in function of ADC clock frequency) */
+ uint32_t InjectedSingleDiff; /*!< Selection of single-ended or differential input.
+ In differential mode: Differential measurement is between the selected channel 'i' (positive input) and channel 'i+1' (negative input).
+ Only channel 'i' has to be configured, channel 'i+1' is configured automatically.
+ This parameter must be a value of @ref ADCEx_SingleDifferential
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: Channels 1 to 14 are available in differential mode. Channels 15, 16, 17, 18 can be used only in single-ended mode.
+ Note: When configuring a channel 'i' in differential mode, the channel 'i-1' is not usable separately.
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) */
+ uint32_t InjectedOffsetNumber; /*!< Selects the offset number
+ This parameter can be a value of @ref ADCEx_OffsetNumber
+ Caution: Only one channel is allowed per offset number. If another channel was on this offset number, the offset will be changed to the new channel. */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data.
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+ this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+ To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+ This parameter can be set to ENABLE or DISABLE.
+ Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+ Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+ Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+ To maintain JAUTO always enabled, DMA must be configured in circular mode.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t QueueInjectedContext; /*!< Specifies whether the context queue feature is enabled.
+ This parameter can be set to ENABLE or DISABLE.
+ If context queue is enabled, injected sequencer&channels configurations are queued on up to 2 contexts. If a
+ new injected context is set when queue is full, error is triggered by interruption and through function 'HAL_ADCEx_InjectedQueueOverflowCallback'.
+ Caution: This feature request that the sequence is fully configured before injected conversion start.
+ Therefore, configure channels with HAL_ADCEx_InjectedConfigChannel() as many times as value of 'InjectedNbrOfConversion' parameter.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set.
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). */
+ uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
+ If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
+ If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC analog watchdog
+ * @note The setting of these parameters with function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state.
+ * ADC state can be either: ADC disabled or ADC enabled without conversion on going on regular and injected groups.
+ */
+typedef struct
+{
+ uint32_t WatchdogNumber; /*!< Selects which ADC analog watchdog to apply to the selected channel.
+ For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels by setting parameter 'WatchdogMode')
+ For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls of 'HAL_ADC_AnalogWDGConfig()' for each channel)
+ This parameter can be a value of @ref ADCEx_analog_watchdog_number. */
+ uint32_t WatchdogMode; /*!< For Analog Watchdog 1: Configures the ADC analog watchdog mode: single channel/overall group of channels, regular/injected group.
+ For Analog Watchdog 2 and 3: There is no configuration for overall group of channels as AWD1. Set value 'ADC_ANALOGWATCHDOG_NONE' to reset channels group programmed with parameter 'Channel', set any other value to not use this parameter.
+ This parameter can be a value of @ref ADCEx_analog_watchdog_mode. */
+ uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
+ For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode' is configured on single channel. Only 1 channel can be monitored.
+ For Analog Watchdog 2 and 3: Several channels can be monitored (successive calls of HAL_ADC_AnalogWDGConfig() must be done, one for each channel.
+ Channels group reset can be done by setting WatchdogMode to 'ADC_ANALOGWATCHDOG_NONE').
+ This parameter can be a value of @ref ADCEx_channels. */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively.
+ Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits
+ the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively.
+ Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits
+ the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. */
+}ADC_AnalogWDGConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC multimode
+ * @note The setting of these parameters with function HAL_ADCEx_MultiModeConfigChannel() is conditioned to ADCs state (both ADCs of the common group).
+ * State of ADCs of the common group must be: disabled.
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
+ This parameter can be a value of @ref ADCEx_Common_mode */
+ uint32_t DMAAccessMode; /*!< Configures the DMA mode for multi ADC mode:
+ selection whether 2 DMA channels (each ADC use its own DMA channel) or 1 DMA channel (one DMA channel for both ADC, DMA of ADC master)
+ This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multimode
+ Caution: Limitations with multimode DMA access enabled (1 DMA channel used): In case of dual mode in high speed (more than 5Msps) or high activity of DMA by other peripherals, there is a risk of DMA overrun.
+ Therefore, it is recommended to disable multimode DMA access: each ADC use its own DMA channel. */
+ uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
+ This parameter can be a value of @ref ADCEx_delay_between_2_sampling_phases
+ Delay range depends on selected resolution: from 1 to 12 clock cycles for 12 bits, from 1 to 10 clock cycles for 10 bits
+ from 1 to 8 clock cycles for 8 bits, from 1 to 6 clock cycles for 6 bits */
+}ADC_MultiModeTypeDef;
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 || STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Structure definition of ADC and regular group initialization
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope entire ADC (affects regular and injected groups): DataAlign, ScanConvMode.
+ * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC can be either disabled or enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
+ or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
+ This parameter can be a value of @ref ADCEx_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+ Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+ If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+ Scan direction is upward: from rank1 to rank 'n'.
+ This parameter can be a value of @ref ADCEx_Scan_mode
+ Note: For regular group, this parameter should be enabled in conversion either by polling (HAL_ADC_Start with Discontinuous mode and NbrOfDiscConversion=1)
+ or by DMA (HAL_ADC_Start_DMA), but not by interruption (HAL_ADC_Start_IT): in scan mode, interruption is triggered only on the
+ the last conversion of the sequence. All previous conversions would be overwritten by the last one.
+ Injected group used with scan mode has not this constraint: each rank has its own result register, no data is overwritten. */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+ To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+ If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Regular */
+}ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC can be either disabled or enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADCEx_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t Rank; /*!< Specifies the rank in the regular group sequencer
+ This parameter can be a value of @ref ADCEx_regular_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t SamplingTime; /*!< Sample time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+ This parameter can be a value of @ref ADCEx_sampling_times
+ Note: In case of usage of internal measurement channels Temperature Sensor,
+ the recommended sampling time is at least 17.1us (sampling time setting to be chosen in function of ADC clock frequency) */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief ADC Configuration injected Channel structure definition
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+ * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+ * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+ * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ExternalTrigInjecConv')
+ * - For all except parameters 'ExternalTrigInjecConv': ADC enabled without conversion on going on injected group.
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
+ This parameter can be a value of @ref ADCEx_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t InjectedRank; /*!< Rank in the injected group sequencer
+ This parameter must be a value of @ref ADCEx_injected_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t InjectedSamplingTime; /*!< Sample time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+ This parameter can be a value of @ref ADCEx_sampling_times
+ Note: In case of usage of internal measurement channels Temperature Sensor,
+ the recommended sampling time is at least 17.1us (sampling time setting to be chosen in function of ADC clock frequency) */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+ this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+ To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+ This parameter can be set to ENABLE or DISABLE.
+ Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+ Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+ Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+ To maintain JAUTO always enabled, DMA must be configured in circular mode.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
+ If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+
+/**
+ * @brief ADC Configuration analog watchdog definition
+ * @note The setting of these parameters with function is conditioned to ADC state.
+ * ADC state can be either disabled or enabled without conversion on going on regular and injected groups.
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all channels, regular/injected group.
+ This parameter can be a value of @ref ADCEx_analog_watchdog_mode. */
+ uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
+ This parameter has an effect only if watchdog mode is configured on single channel (parameter WatchdogMode)
+ This parameter can be a value of @ref ADCEx_channels. */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+#endif /* STM32F373xC || STM32F378xx */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup ADCEx_Error_Code
+ * @{
+ */
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_ADC_ERROR_INTERNAL ((uint32_t)0x01) /*!< ADC IP internal error: if problem of clocking,
+ enable/disable, erroneous state */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x02) /*!< Overrun error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x04) /*!< DMA transfer error */
+#define HAL_ADC_ERROR_JQOVF ((uint32_t)0x08) /*!< Injected context queue overflow error */
+/**
+ * @}
+ */
+
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8) || defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+/** @defgroup ADCEx_ClockPrescaler
+ * @{
+ */
+#define ADC_CLOCK_ASYNC ((uint32_t)0x00000000) /*!< ADC asynchronous clock derived from ADC dedicated PLL */
+
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8)
+#define ADC_CLOCK_SYNC_PCLK_DIV1 ((uint32_t)ADC12_CCR_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock without prescaler */
+#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC12_CCR_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */
+#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC12_CCR_CKMODE) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */
+#endif /* STM32F303xC || STM32F358xx || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 */
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+#define ADC_CLOCK_SYNC_PCLK_DIV1 ((uint32_t)ADC1_CCR_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock without prescaler */
+#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC1_CCR_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */
+#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC1_CCR_CKMODE) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 /* Obsolete naming, kept for compatibility with some other devices */
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 /* Obsolete naming, kept for compatibility with some other devices */
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 /* Obsolete naming, kept for compatibility with some other devices */
+
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_ASYNC) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV1) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Resolution
+ * @{
+ */
+#define ADC_RESOLUTION12b ((uint32_t)0x00000000) /*!< ADC 12-bit resolution */
+#define ADC_RESOLUTION10b ((uint32_t)ADC_CFGR_RES_0) /*!< ADC 10-bit resolution */
+#define ADC_RESOLUTION8b ((uint32_t)ADC_CFGR_RES_1) /*!< ADC 8-bit resolution */
+#define ADC_RESOLUTION6b ((uint32_t)ADC_CFGR_RES) /*!< ADC 6-bit resolution */
+
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION12b) || \
+ ((RESOLUTION) == ADC_RESOLUTION10b) || \
+ ((RESOLUTION) == ADC_RESOLUTION8b) || \
+ ((RESOLUTION) == ADC_RESOLUTION6b) )
+
+#define IS_ADC_RESOLUTION_8_6_BITS(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION8b) || \
+ ((RESOLUTION) == ADC_RESOLUTION6b) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Data_align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CFGR_ALIGN)
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Scan_mode
+ * @{
+ */
+#define ADC_SCAN_DISABLE ((uint32_t)0x00000000)
+#define ADC_SCAN_ENABLE ((uint32_t)0x00000001)
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \
+ ((SCAN_MODE) == ADC_SCAN_ENABLE) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CFGR_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CFGR_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CFGR_EXTEN)
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Regular
+ * @{
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T3_CC4 ADC1_2_EXTERNALTRIG_T3_CC4
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_2_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+
+/*!< External triggers of regular group for ADC3&ADC4 only */
+#define ADC_EXTERNALTRIGCONV_T2_CC1 ADC3_4_EXTERNALTRIG_T2_CC1
+#define ADC_EXTERNALTRIGCONV_T2_CC3 ADC3_4_EXTERNALTRIG_T2_CC3
+#define ADC_EXTERNALTRIGCONV_T3_CC1 ADC3_4_EXTERNALTRIG_T3_CC1
+#define ADC_EXTERNALTRIGCONV_T4_CC1 ADC3_4_EXTERNALTRIG_T4_CC1
+#define ADC_EXTERNALTRIGCONV_T7_TRGO ADC3_4_EXTERNALTRIG_T7_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_CC1 ADC3_4_EXTERNALTRIG_T8_CC1
+#define ADC_EXTERNALTRIGCONV_EXT_IT2 ADC3_4_EXTERNALTRIG_EXT_IT2
+
+/*!< External triggers of regular group for ADC1&ADC2, ADC3&ADC4 */
+/* Note: Triggers affected to group ADC1_2 by default, redirected to group */
+/* ADC3_4 by driver when needed. */
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_2_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_TRGO ADC1_2_EXTERNALTRIG_T4_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ADC1_2_EXTERNALTRIG_T8_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_TRGO2 ADC1_2_EXTERNALTRIG_T8_TRGO2
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T7_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT2) || \
+ \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_2_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_CC4 ADC1_2_EXTERNALTRIG_T3_CC4
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_T4_TRGO ADC1_2_EXTERNALTRIG_T4_TRGO
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_2_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_2_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_CC4 ADC1_2_EXTERNALTRIG_T3_CC4
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_T4_TRGO ADC1_2_EXTERNALTRIG_T4_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ADC1_2_EXTERNALTRIG_T8_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_TRGO2 ADC1_2_EXTERNALTRIG_T8_TRGO2
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_2_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F303x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_2_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_CC4 ADC1_2_EXTERNALTRIG_T3_CC4
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_2_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#define ADC_EXTERNALTRIGCONVHRTIM_TRG1 ADC1_2_EXTERNALTRIG_HRTIM_TRG1
+#define ADC_EXTERNALTRIGCONVHRTIM_TRG3 ADC1_2_EXTERNALTRIG_HRTIM_TRG3
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONVHRTIM_TRG1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONVHRTIM_TRG3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_EXTERNALTRIG_EXT_IT11
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_EXTERNALTRIG_T15_TRGO
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular
+ * @{
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/* List of external triggers for common groups ADC1&ADC2 and/or ADC3&ADC4: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+
+/* External triggers of regular group for ADC1 & ADC2 */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T8_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T8_TRGO2 ((uint32_t) ADC_CFGR_EXTSEL_3)
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2))
+#define ADC1_2_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T3_CC4 ((uint32_t)ADC_CFGR_EXTSEL)
+
+/* External triggers of regular group for ADC3 & ADC4 */
+#define ADC3_4_EXTERNALTRIG_T3_CC1 ((uint32_t)0x00000000)
+#define ADC3_4_EXTERNALTRIG_T2_CC3 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC3_4_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC3_4_EXTERNALTRIG_T8_CC1 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T8_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC3_4_EXTERNALTRIG_EXT_IT2 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T4_CC1 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC3_4_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T8_TRGO2 ((uint32_t)ADC_CFGR_EXTSEL_3)
+#define ADC3_4_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC3_4_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2))
+#define ADC3_4_EXTERNALTRIG_T7_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC3_4_EXTERNALTRIG_T2_CC1 ((uint32_t)ADC_CFGR_EXTSEL)
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC)
+/* List of external triggers of common group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2))
+#define ADC1_2_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T3_CC4 ((uint32_t)ADC_CFGR_EXTSEL)
+#endif /* STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+/* List of external triggers of common group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T8_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T8_TRGO2 ((uint32_t) ADC_CFGR_EXTSEL_3)
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2))
+#define ADC1_2_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T3_CC4 ((uint32_t)ADC_CFGR_EXTSEL)
+#endif /* STM32F303x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/* List of external triggers of common group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_HRTIM_TRG1 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_HRTIM_TRG3 ((uint32_t) ADC_CFGR_EXTSEL_3)
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T3_CC4 ((uint32_t)ADC_CFGR_EXTSEL)
+#endif /* STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+/* List of external triggers of regular group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_EOCSelection
+ * @{
+ */
+#define EOC_SINGLE_CONV ((uint32_t) ADC_ISR_EOC)
+#define EOC_SEQ_CONV ((uint32_t) ADC_ISR_EOS)
+#define EOC_SINGLE_SEQ_CONV ((uint32_t)(ADC_ISR_EOC | ADC_ISR_EOS)) /*!< reserved for future use */
+
+#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == EOC_SINGLE_CONV) || \
+ ((EOC_SELECTION) == EOC_SEQ_CONV) || \
+ ((EOC_SELECTION) == EOC_SINGLE_SEQ_CONV) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Overrun
+ * @{
+ */
+#define OVR_DATA_OVERWRITTEN ((uint32_t)0x00000000) /*!< Default setting, to be used for compatibility with other STM32 devices */
+#define OVR_DATA_PRESERVED ((uint32_t)0x00000001)
+
+#define IS_ADC_OVERRUN(OVR) (((OVR) == OVR_DATA_PRESERVED) || \
+ ((OVR) == OVR_DATA_OVERWRITTEN) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_channels
+ * @{
+ */
+/* Note: Depending on devices, some channels may not be available on package */
+/* pins. Refer to device datasheet for channels availability. */
+#define ADC_CHANNEL_1 ((uint32_t)(ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_2 ((uint32_t)(ADC_SQR3_SQ10_1))
+#define ADC_CHANNEL_3 ((uint32_t)(ADC_SQR3_SQ10_1 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_4 ((uint32_t)(ADC_SQR3_SQ10_2))
+#define ADC_CHANNEL_5 ((uint32_t)(ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_6 ((uint32_t)(ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_1))
+#define ADC_CHANNEL_7 ((uint32_t)(ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_1 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_8 ((uint32_t)(ADC_SQR3_SQ10_3))
+#define ADC_CHANNEL_9 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_10 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_1))
+#define ADC_CHANNEL_11 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_1 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_12 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_2))
+#define ADC_CHANNEL_13 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_14 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_1))
+#define ADC_CHANNEL_15 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_1 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_16 ((uint32_t)(ADC_SQR3_SQ10_4))
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_SQR3_SQ10_4 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_18 ((uint32_t)(ADC_SQR3_SQ10_4 | ADC_SQR3_SQ10_1))
+
+/* Note: Vopamp1, TempSensor and Vbat internal channels available on ADC1 only */
+#define ADC_CHANNEL_VOPAMP1 ADC_CHANNEL_15
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
+#define ADC_CHANNEL_VBAT ADC_CHANNEL_17
+
+/* Note: Vopamp2/3/4 internal channels available on ADC2/3/4 respectively */
+#define ADC_CHANNEL_VOPAMP2 ADC_CHANNEL_17
+#define ADC_CHANNEL_VOPAMP3 ADC_CHANNEL_17
+#define ADC_CHANNEL_VOPAMP4 ADC_CHANNEL_17
+
+/* Note: VrefInt internal channels available on all ADCs, but only */
+/* one ADC is allowed to be connected to VrefInt at the same time. */
+#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_18)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((CHANNEL) == ADC_CHANNEL_VBAT) || \
+ ((CHANNEL) == ADC_CHANNEL_VREFINT) || \
+ ((CHANNEL) == ADC_CHANNEL_VOPAMP1) || \
+ ((CHANNEL) == ADC_CHANNEL_VOPAMP2) || \
+ ((CHANNEL) == ADC_CHANNEL_VOPAMP3) || \
+ ((CHANNEL) == ADC_CHANNEL_VOPAMP4) )
+
+#define IS_ADC_DIFF_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) )
+
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_sampling_times
+ * @{
+ */
+#define ADC_SAMPLETIME_1CYCLE_5 ((uint32_t)0x00000000) /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_2CYCLES_5 ((uint32_t)ADC_SMPR2_SMP10_0) /*!< Sampling time 2.5 ADC clock cycles */
+#define ADC_SAMPLETIME_4CYCLES_5 ((uint32_t)ADC_SMPR2_SMP10_1) /*!< Sampling time 4.5 ADC clock cycles */
+#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP10_1 | ADC_SMPR2_SMP10_0)) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_19CYCLES_5 ((uint32_t)ADC_SMPR2_SMP10_2) /*!< Sampling time 19.5 ADC clock cycles */
+#define ADC_SAMPLETIME_61CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_0)) /*!< Sampling time 61.5 ADC clock cycles */
+#define ADC_SAMPLETIME_181CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_1)) /*!< Sampling time 181.5 ADC clock cycles */
+#define ADC_SAMPLETIME_601CYCLES_5 ((uint32_t)ADC_SMPR2_SMP10) /*!< Sampling time 601.5 ADC clock cycles */
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \
+ ((TIME) == ADC_SAMPLETIME_2CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_4CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_19CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_61CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_181CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_601CYCLES_5) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_SingleDifferential
+ * @{
+ */
+#define ADC_SINGLE_ENDED ((uint32_t)0x00000000)
+#define ADC_DIFFERENTIAL_ENDED ((uint32_t)0x00000001)
+
+#define IS_ADC_SINGLE_DIFFERENTIAL(SING_DIFF) (((SING_DIFF) == ADC_SINGLE_ENDED) || \
+ ((SING_DIFF) == ADC_DIFFERENTIAL_ENDED) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_OffsetNumber
+ * @{
+ */
+#define ADC_OFFSET_NONE ((uint32_t)0x00)
+#define ADC_OFFSET_1 ((uint32_t)0x01)
+#define ADC_OFFSET_2 ((uint32_t)0x02)
+#define ADC_OFFSET_3 ((uint32_t)0x03)
+#define ADC_OFFSET_4 ((uint32_t)0x04)
+
+#define IS_ADC_OFFSET_NUMBER(OFFSET_NUMBER) (((OFFSET_NUMBER) == ADC_OFFSET_NONE) || \
+ ((OFFSET_NUMBER) == ADC_OFFSET_1) || \
+ ((OFFSET_NUMBER) == ADC_OFFSET_2) || \
+ ((OFFSET_NUMBER) == ADC_OFFSET_3) || \
+ ((OFFSET_NUMBER) == ADC_OFFSET_4) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_regular_rank
+ * @{
+ */
+#define ADC_REGULAR_RANK_1 ((uint32_t)0x00000001)
+#define ADC_REGULAR_RANK_2 ((uint32_t)0x00000002)
+#define ADC_REGULAR_RANK_3 ((uint32_t)0x00000003)
+#define ADC_REGULAR_RANK_4 ((uint32_t)0x00000004)
+#define ADC_REGULAR_RANK_5 ((uint32_t)0x00000005)
+#define ADC_REGULAR_RANK_6 ((uint32_t)0x00000006)
+#define ADC_REGULAR_RANK_7 ((uint32_t)0x00000007)
+#define ADC_REGULAR_RANK_8 ((uint32_t)0x00000008)
+#define ADC_REGULAR_RANK_9 ((uint32_t)0x00000009)
+#define ADC_REGULAR_RANK_10 ((uint32_t)0x0000000A)
+#define ADC_REGULAR_RANK_11 ((uint32_t)0x0000000B)
+#define ADC_REGULAR_RANK_12 ((uint32_t)0x0000000C)
+#define ADC_REGULAR_RANK_13 ((uint32_t)0x0000000D)
+#define ADC_REGULAR_RANK_14 ((uint32_t)0x0000000E)
+#define ADC_REGULAR_RANK_15 ((uint32_t)0x0000000F)
+#define ADC_REGULAR_RANK_16 ((uint32_t)0x00000010)
+
+#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_10) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_11) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_12) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_13) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_14) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_15) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_16) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_rank
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004)
+
+#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_2) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_3) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_4) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_JSQR_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING ((uint32_t)ADC_JSQR_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING ((uint32_t)ADC_JSQR_JEXTEN)
+
+#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Injected
+ * @{
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/* List of external triggers with generic trigger name, independently of ADC */
+/* target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/* External triggers of injected group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ADC1_2_EXTERNALTRIGINJEC_T3_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ADC1_2_EXTERNALTRIGINJEC_T3_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_2_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+/* External triggers of injected group for ADC3&ADC4 only */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC3 ADC3_4_EXTERNALTRIGINJEC_T1_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC3_4_EXTERNALTRIGINJEC_T4_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC4 ADC3_4_EXTERNALTRIGINJEC_T4_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T7_TRGO ADC3_4_EXTERNALTRIGINJEC_T7_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ADC3_4_EXTERNALTRIGINJEC_T8_CC2
+
+/* External triggers of injected group for ADC1&ADC2, ADC3&ADC4 */
+/* Note: Triggers affected to group ADC1_2 by default, redirected to group */
+/* ADC3_4 by driver when needed. */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_TRGO ADC1_2_EXTERNALTRIGINJEC_T3_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T8_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO ADC1_2_EXTERNALTRIGINJEC_T8_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T8_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_2_EXTERNALTRIGINJEC_T15_TRGO
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T7_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
+ \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/* External triggers of injected group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ADC1_2_EXTERNALTRIGINJEC_T3_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ADC1_2_EXTERNALTRIGINJEC_T3_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T3_TRGO ADC1_2_EXTERNALTRIGINJEC_T3_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_2_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_2_EXTERNALTRIGINJEC_T15_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/* External triggers of injected group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ADC1_2_EXTERNALTRIGINJEC_T3_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ADC1_2_EXTERNALTRIGINJEC_T3_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T3_TRGO ADC1_2_EXTERNALTRIGINJEC_T3_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_2_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T8_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO ADC1_2_EXTERNALTRIGINJEC_T8_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T8_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_2_EXTERNALTRIGINJEC_T15_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F303x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/* External triggers of injected group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ADC1_2_EXTERNALTRIGINJEC_T3_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ADC1_2_EXTERNALTRIGINJEC_T3_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T3_TRGO ADC1_2_EXTERNALTRIGINJEC_T3_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_2_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_2_EXTERNALTRIGINJEC_T15_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_HRTIM_TRG2 ADC1_2_EXTERNALTRIGINJEC_HRTIM_TRG2
+#define ADC_EXTERNALTRIGINJECCONV_HRTIM_TRG4 ADC1_2_EXTERNALTRIGINJEC_HRTIM_TRG4
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_HRTIM_TRG2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_HRTIM_TRG4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of injected group for ADC1 */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_EXTERNALTRIGINJEC_T15_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_EXTERNALTRIGINJEC_EXT_IT15
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected
+ * @{
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/* List of external triggers sorted of groups ADC1&ADC2 and/or ADC3&ADC4: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+
+/* External triggers for injected groups of ADC1 & ADC2 */
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)ADC_JSQR_JEXTSEL_1)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_2_EXTERNALTRIGINJEC_T8_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T8_TRGO2 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+
+/* External triggers for injected groups of ADC3 & ADC4 */
+/* Note: External triggers JEXT2 and JEXT5 are the same (TIM4_CC3 event). */
+/* JEXT2 is the main trigger, JEXT5 could be redirected to another */
+/* in future devices. */
+/* However, this channel is implemented with a SW offset of 0x10000 for */
+/* differentiation between similar triggers of common groups ADC1&ADC2, */
+/* ADC3&ADC4 (Differentiation processed into macro */
+/* __HAL_ADC_JSQR_JEXTSEL) */
+#define ADC3_4_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC3_4_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC3_4_EXTERNALTRIGINJEC_T4_CC3 ((uint32_t)ADC_JSQR_JEXTSEL_1 | 0x10000)
+#define ADC3_4_EXTERNALTRIGINJEC_T8_CC2 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T8_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC3_4_EXTERNALTRIGINJEC_T4_CC4 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC3_4_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC3_4_EXTERNALTRIGINJEC_T8_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T8_TRGO2 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1))
+#define ADC3_4_EXTERNALTRIGINJEC_T1_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC3_4_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T7_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC3_4_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC)
+/* List of external triggers of group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)ADC_JSQR_JEXTSEL_1)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+/* List of external triggers of group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)ADC_JSQR_JEXTSEL_1)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_2_EXTERNALTRIGINJEC_T8_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T8_TRGO2 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F303x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/* List of external triggers of group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)ADC_JSQR_JEXTSEL_1)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_2_EXTERNALTRIGINJEC_HRTIM_TRG2 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_HRTIM_TRG4 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+/* List of external triggers of injected group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Common_mode
+ * @{
+ */
+#define ADC_MODE_INDEPENDENT ((uint32_t)(0x00000000))
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC12_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)(ADC12_CCR_MULTI_1))
+#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC12_CCR_MULTI_2 | ADC12_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC12_CCR_MULTI_2 | ADC12_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL ((uint32_t)(ADC12_CCR_MULTI_2 | ADC12_CCR_MULTI_1 | ADC12_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC12_CCR_MULTI_3 | ADC12_CCR_MULTI_0))
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT) || \
+ ((MODE) == ADC_DUALMODE_INTERL) || \
+ ((MODE) == ADC_DUALMODE_ALTERTRIG) )
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multimode
+ * @{
+ */
+#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000) /*!< DMA multimode disabled: each ADC will use its own DMA channel */
+#define ADC_DMAACCESSMODE_12_10_BITS ((uint32_t)ADC12_CCR_MDMA_1) /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 12 and 10 bits resolution */
+#define ADC_DMAACCESSMODE_8_6_BITS ((uint32_t)ADC12_CCR_MDMA) /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 8 and 6 bits resolution */
+
+#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
+ ((MODE) == ADC_DMAACCESSMODE_12_10_BITS) || \
+ ((MODE) == ADC_DMAACCESSMODE_8_6_BITS) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_delay_between_2_sampling_phases
+ * @{
+ */
+#define ADC_TWOSAMPLINGDELAY_1CYCLE ((uint32_t)(0x00000000))
+#define ADC_TWOSAMPLINGDELAY_2CYCLES ((uint32_t)(ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_3CYCLES ((uint32_t)(ADC12_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_4CYCLES ((uint32_t)(ADC12_CCR_DELAY_1 | ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)(ADC12_CCR_DELAY_2))
+#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)(ADC12_CCR_DELAY_2 | ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)(ADC12_CCR_DELAY_2 | ADC12_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC12_CCR_DELAY_2 | ADC12_CCR_DELAY_1 | ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)(ADC12_CCR_DELAY_3))
+#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC12_CCR_DELAY_3 | ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC12_CCR_DELAY_3 | ADC12_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC12_CCR_DELAY_3 | ADC12_CCR_DELAY_1 | ADC12_CCR_DELAY_0))
+
+#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_1CYCLE) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_2CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_3CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_4CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_analog_watchdog_number
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_1 ((uint32_t)0x00000001)
+#define ADC_ANALOGWATCHDOG_2 ((uint32_t)0x00000002)
+#define ADC_ANALOGWATCHDOG_3 ((uint32_t)0x00000003)
+
+#define IS_ADC_ANALOG_WATCHDOG_NUMBER(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_1) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_2) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_3) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_analog_watchdog_mode
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t) 0x00000000)
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CFGR_AWD1SGL | ADC_CFGR_JAWD1EN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN | ADC_CFGR_JAWD1EN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CFGR_AWD1EN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t) ADC_CFGR_JAWD1EN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CFGR_AWD1EN | ADC_CFGR_JAWD1EN))
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_conversion_type
+ * @{
+ */
+#define REGULAR_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_EOS))
+#define INJECTED_GROUP ((uint32_t)(ADC_FLAG_JEOC | ADC_FLAG_JEOS))
+#define REGULAR_INJECTED_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_JEOC | ADC_FLAG_JEOS))
+
+#define IS_ADC_CONVERSION_GROUP(CONVERSION) (((CONVERSION) == REGULAR_GROUP) || \
+ ((CONVERSION) == INJECTED_GROUP) || \
+ ((CONVERSION) == REGULAR_INJECTED_GROUP) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Event_type
+ * @{
+ */
+#define AWD1_EVENT ((uint32_t)ADC_FLAG_AWD1) /*!< ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 devices) */
+#define AWD2_EVENT ((uint32_t)ADC_FLAG_AWD2) /*!< ADC Analog watchdog 2 event (additional analog watchdog, present only on STM32F3 devices) */
+#define AWD3_EVENT ((uint32_t)ADC_FLAG_AWD3) /*!< ADC Analog watchdog 3 event (additional analog watchdog, present only on STM32F3 devices) */
+#define OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /*!< ADC overrun event */
+#define JQOVF_EVENT ((uint32_t)ADC_FLAG_JQOVF) /*!< ADC Injected Context Queue Overflow event */
+
+#define AWD_EVENT AWD1_EVENT /*!< ADC Analog watchdog 1 event: Naming for compatibility with other STM32 devices having only 1 analog watchdog */
+
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == AWD_EVENT) || \
+ ((EVENT) == AWD2_EVENT) || \
+ ((EVENT) == AWD3_EVENT) || \
+ ((EVENT) == OVR_EVENT) || \
+ ((EVENT) == JQOVF_EVENT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_interrupts_definition
+ * @{
+ */
+#define ADC_IT_RDY ADC_IER_RDY /*!< ADC Ready (ADRDY) interrupt source */
+#define ADC_IT_EOSMP ADC_IER_EOSMP /*!< ADC End of Sampling interrupt source */
+#define ADC_IT_EOC ADC_IER_EOC /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_EOS ADC_IER_EOS /*!< ADC End of Regular sequence of Conversions interrupt source */
+#define ADC_IT_OVR ADC_IER_OVR /*!< ADC overrun interrupt source */
+#define ADC_IT_JEOC ADC_IER_JEOC /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IT_JEOS ADC_IER_JEOS /*!< ADC End of Injected sequence of Conversions interrupt source */
+#define ADC_IT_AWD1 ADC_IER_AWD1 /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog, present on all STM32 devices) */
+#define ADC_IT_AWD2 ADC_IER_AWD2 /*!< ADC Analog watchdog 2 interrupt source (additional analog watchdog, present only on STM32F3 devices) */
+#define ADC_IT_AWD3 ADC_IER_AWD3 /*!< ADC Analog watchdog 3 interrupt source (additional analog watchdog, present only on STM32F3 devices) */
+#define ADC_IT_JQOVF ADC_IER_JQOVF /*!< ADC Injected Context Queue Overflow interrupt source */
+
+#define ADC_IT_AWD ADC_IT_AWD1 /*!< ADC Analog watchdog 1 interrupt source: Naming for compatibility with other STM32 devices having only 1 analog watchdog */
+
+/* Check of single flag */
+#define IS_ADC_IT(IT) (((IT) == ADC_IT_RDY) || ((IT) == ADC_IT_EOSMP) || \
+ ((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_EOS) || \
+ ((IT) == ADC_IT_OVR) || ((IT) == ADC_IT_EOS) || \
+ ((IT) == ADC_IT_JEOS) || ((IT) == ADC_IT_AWD1) || \
+ ((IT) == ADC_IT_AWD2) || ((IT) == ADC_IT_AWD3) || \
+ ((IT) == ADC_IT_JQOVF) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_flags_definition
+ * @{
+ */
+#define ADC_FLAG_RDY ADC_ISR_ADRD /*!< ADC Ready (ADRDY) flag */
+#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */
+#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */
+#define ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC End of Regular sequence of Conversions flag */
+#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */
+#define ADC_FLAG_JEOC ADC_ISR_JEOC /*!< ADC End of Injected Conversion flag */
+#define ADC_FLAG_JEOS ADC_ISR_JEOS /*!< ADC End of Injected sequence of Conversions flag */
+#define ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC Analog watchdog 1 flag (main analog watchdog, present on all STM32 devices) */
+#define ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC Analog watchdog 2 flag (additional analog watchdog, present only on STM32F3 devices) */
+#define ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC Analog watchdog 3 flag (additional analog watchdog, present only on STM32F3 devices) */
+#define ADC_FLAG_JQOVF ADC_ISR_JQOVF /*!< ADC Injected Context Queue Overflow flag */
+
+#define ADC_FLAG_AWD ADC_FLAG_AWD1 /*!< ADC Analog watchdog 1 flag: Naming for compatibility with other STM32 devices having only 1 analog watchdog */
+
+#define ADC_FLAG_ALL (ADC_FLAG_RDY | ADC_FLAG_EOSMP | ADC_FLAG_EOC | ADC_FLAG_EOS | \
+ ADC_FLAG_JEOC | ADC_FLAG_JEOS | ADC_FLAG_OVR | ADC_FLAG_AWD1 | \
+ ADC_FLAG_AWD2 | ADC_FLAG_AWD3 | ADC_FLAG_JQOVF)
+
+/* Combination of all post-conversion flags bits: EOC/EOS, JEOC/JEOS, OVR, AWDx */
+#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_JEOC | ADC_FLAG_JEOS | \
+ ADC_FLAG_OVR | ADC_FLAG_AWD1 | ADC_FLAG_AWD2 | ADC_FLAG_AWD3 | \
+ ADC_FLAG_JQOVF)
+
+/* Check of single flag */
+#define IS_ADC_FLAG(FLAG) (((FLAG) == ADC_FLAG_RDY) || ((FLAG) == ADC_FLAG_EOSMP) || \
+ ((FLAG) == ADC_FLAG_EOC) || ((FLAG) == ADC_FLAG_EOS) || \
+ ((FLAG) == ADC_FLAG_OVR) || ((FLAG) == ADC_FLAG_JEOC) || \
+ ((FLAG) == ADC_FLAG_JEOS) || ((FLAG) == ADC_FLAG_AWD1) || \
+ ((FLAG) == ADC_FLAG_AWD2) || ((FLAG) == ADC_FLAG_AWD3) || \
+ ((FLAG) == ADC_FLAG_JQOVF) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_multimode_bits
+ * @{
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8)
+#define ADC_CCR_MULTI ADC12_CCR_MULTI /*!< Multi ADC mode selection */
+#define ADC_CCR_MULTI_0 ADC12_CCR_MULTI_0 /*!< MULTI bit 0 */
+#define ADC_CCR_MULTI_1 ADC12_CCR_MULTI_1 /*!< MULTI bit 1 */
+#define ADC_CCR_MULTI_2 ADC12_CCR_MULTI_2 /*!< MULTI bit 2 */
+#define ADC_CCR_MULTI_3 ADC12_CCR_MULTI_3 /*!< MULTI bit 3 */
+#define ADC_CCR_MULTI_4 ADC12_CCR_MULTI_4 /*!< MULTI bit 4 */
+#define ADC_CCR_DELAY ADC12_CCR_DELAY /*!< Delay between 2 sampling phases */
+#define ADC_CCR_DELAY_0 ADC12_CCR_DELAY_0 /*!< DELAY bit 0 */
+#define ADC_CCR_DELAY_1 ADC12_CCR_DELAY_1 /*!< DELAY bit 1 */
+#define ADC_CCR_DELAY_2 ADC12_CCR_DELAY_2 /*!< DELAY bit 2 */
+#define ADC_CCR_DELAY_3 ADC12_CCR_DELAY_3 /*!< DELAY bit 3 */
+#define ADC_CCR_DMACFG ADC12_CCR_DMACFG /*!< DMA configuration for multi-ADC mode */
+#define ADC_CCR_MDMA ADC12_CCR_MDMA /*!< DMA mode for multi-ADC mode */
+#define ADC_CCR_MDMA_0 ADC12_CCR_MDMA_0 /*!< MDMA bit 0 */
+#define ADC_CCR_MDMA_1 ADC12_CCR_MDMA_1 /*!< MDMA bit 1 */
+#define ADC_CCR_CKMODE ADC12_CCR_CKMODE /*!< ADC clock mode */
+#define ADC_CCR_CKMODE_0 ADC12_CCR_CKMODE_0 /*!< CKMODE bit 0 */
+#define ADC_CCR_CKMODE_1 ADC12_CCR_CKMODE_1 /*!< CKMODE bit 1 */
+#define ADC_CCR_VREFEN ADC12_CCR_VREFEN /*!< VREFINT enable */
+#define ADC_CCR_TSEN ADC12_CCR_TSEN /*!< Temperature sensor enable */
+#define ADC_CCR_VBATEN ADC12_CCR_VBATEN /*!< VBAT enable */
+#endif /* STM32F303xC || STM32F358xx || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+#define ADC_CCR_MULTI ADC1_CCR_MULTI /*!< Multi ADC mode selection */
+#define ADC_CCR_MULTI_0 ADC1_CCR_MULTI_0 /*!< MULTI bit 0 */
+#define ADC_CCR_MULTI_1 ADC1_CCR_MULTI_1 /*!< MULTI bit 1 */
+#define ADC_CCR_MULTI_2 ADC1_CCR_MULTI_2 /*!< MULTI bit 2 */
+#define ADC_CCR_MULTI_3 ADC1_CCR_MULTI_3 /*!< MULTI bit 3 */
+#define ADC_CCR_MULTI_4 ADC1_CCR_MULTI_4 /*!< MULTI bit 4 */
+#define ADC_CCR_DELAY ADC1_CCR_DELAY /*!< Delay between 2 sampling phases */
+#define ADC_CCR_DELAY_0 ADC1_CCR_DELAY_0 /*!< DELAY bit 0 */
+#define ADC_CCR_DELAY_1 ADC1_CCR_DELAY_1 /*!< DELAY bit 1 */
+#define ADC_CCR_DELAY_2 ADC1_CCR_DELAY_2 /*!< DELAY bit 2 */
+#define ADC_CCR_DELAY_3 ADC1_CCR_DELAY_3 /*!< DELAY bit 3 */
+#define ADC_CCR_DMACFG ADC1_CCR_DMACFG /*!< DMA configuration for multi-ADC mode */
+#define ADC_CCR_MDMA ADC1_CCR_MDMA /*!< DMA mode for multi-ADC mode */
+#define ADC_CCR_MDMA_0 ADC1_CCR_MDMA_0 /*!< MDMA bit 0 */
+#define ADC_CCR_MDMA_1 ADC1_CCR_MDMA_1 /*!< MDMA bit 1 */
+#define ADC_CCR_CKMODE ADC1_CCR_CKMODE /*!< ADC clock mode */
+#define ADC_CCR_CKMODE_0 ADC1_CCR_CKMODE_0 /*!< CKMODE bit 0 */
+#define ADC_CCR_CKMODE_1 ADC1_CCR_CKMODE_1 /*!< CKMODE bit 1 */
+#define ADC_CCR_VREFEN ADC1_CCR_VREFEN /*!< VREFINT enable */
+#define ADC_CCR_TSEN ADC1_CCR_TSEN /*!< Temperature sensor enable */
+#define ADC_CCR_VBATEN ADC1_CCR_VBATEN /*!< VBAT enable */
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+
+/**
+ * @}
+ */
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_range_verification
+ * in function of ADC resolution selected (12, 10, 8 or 6 bits)
+ * @{
+ */
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION12b) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION10b) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION8b) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION6b) && ((ADC_VALUE) <= ((uint32_t)0x003F))) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_nb_conv_verification
+ * @{
+ */
+#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_nb_conv_verification
+ * @{
+ */
+#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number_verification
+ * @{
+ */
+#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_calibration_factor_length_verification
+ * @{
+ */
+/**
+ * @brief Calibration factor length verification (7 bits maximum)
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define IS_ADC_CALFACT(_Calibration_Factor_) ((_Calibration_Factor_) <= ((uint32_t)0x7F))
+/**
+ * @}
+ */
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 || STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup ADCEx_Data_align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Scan_mode
+ * @{
+ */
+#define ADC_SCAN_DISABLE ((uint32_t)0x00000000)
+#define ADC_SCAN_ENABLE ((uint32_t)0x00000001)
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \
+ ((SCAN_MODE) == ADC_SCAN_ENABLE) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTTRIG)
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Regular
+ * @{
+ */
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC2 ADC_EXTERNALTRIG_T4_CC2
+#define ADC_EXTERNALTRIGCONV_T19_TRGO ADC_EXTERNALTRIG_T19_TRGO
+#define ADC_EXTERNALTRIGCONV_T19_CC3 ADC_EXTERNALTRIG_T19_CC3
+#define ADC_EXTERNALTRIGCONV_T19_CC4 ADC_EXTERNALTRIG_T19_CC4
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC_EXTERNALTRIG_EXT_IT11
+#define ADC_SOFTWARE_START ADC_SWSTART
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T19_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T19_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T19_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular
+ * @{
+ */
+
+/* List of external triggers of regular group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIG_T19_TRGO ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIG_T19_CC3 ((uint32_t)ADC_CR2_EXTSEL_0)
+#define ADC_EXTERNALTRIG_T19_CC4 ((uint32_t)ADC_CR2_EXTSEL_1)
+#define ADC_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_2)
+#define ADC_EXTERNALTRIG_T4_CC2 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_SWSTART ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_channels
+ * @{
+ */
+/* Note: Depending on devices, some channels may not be available on package */
+/* pins. Refer to device datasheet for channels availability. */
+#define ADC_CHANNEL_0 ((uint32_t)0x00000000)
+#define ADC_CHANNEL_1 ((uint32_t)(ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_2 ((uint32_t)(ADC_SQR3_SQ1_1))
+#define ADC_CHANNEL_3 ((uint32_t)(ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_4 ((uint32_t)(ADC_SQR3_SQ1_2))
+#define ADC_CHANNEL_5 ((uint32_t)(ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_6 ((uint32_t)(ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1))
+#define ADC_CHANNEL_7 ((uint32_t)(ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_8 ((uint32_t)(ADC_SQR3_SQ1_3))
+#define ADC_CHANNEL_9 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_10 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_1))
+#define ADC_CHANNEL_11 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_12 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2))
+#define ADC_CHANNEL_13 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_14 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1))
+#define ADC_CHANNEL_15 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_16 ((uint32_t)(ADC_SQR3_SQ1_4))
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_SQR3_SQ1_4 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_18 ((uint32_t)(ADC_SQR3_SQ1_4 | ADC_SQR3_SQ1_1))
+
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
+#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17
+#define ADC_CHANNEL_VBAT ADC_CHANNEL_18
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((CHANNEL) == ADC_CHANNEL_VREFINT) || \
+ ((CHANNEL) == ADC_CHANNEL_VBAT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_sampling_times
+ * @{
+ */
+#define ADC_SAMPLETIME_1CYCLE_5 ((uint32_t)0x00000000) /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t) ADC_SMPR2_SMP0_0) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t) ADC_SMPR2_SMP0_1) /*!< Sampling time 13.5 ADC clock cycles */
+#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 28.5 ADC clock cycles */
+#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t) ADC_SMPR2_SMP0_2) /*!< Sampling time 41.5 ADC clock cycles */
+#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 55.5 ADC clock cycles */
+#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1)) /*!< Sampling time 71.5 ADC clock cycles */
+#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t) ADC_SMPR2_SMP0) /*!< Sampling time 239.5 ADC clock cycles */
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \
+ ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_239CYCLES_5) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_sampling_times_all_channels
+ * @{
+ */
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 \
+ (ADC_SMPR2_SMP9_2 | ADC_SMPR2_SMP8_2 | ADC_SMPR2_SMP7_2 | ADC_SMPR2_SMP6_2 | \
+ ADC_SMPR2_SMP5_2 | ADC_SMPR2_SMP4_2 | ADC_SMPR2_SMP3_2 | ADC_SMPR2_SMP2_2 | \
+ ADC_SMPR2_SMP1_2 | ADC_SMPR2_SMP0_2)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 \
+ (ADC_SMPR1_SMP17_2 | ADC_SMPR1_SMP16_2 | ADC_SMPR1_SMP15_2 | ADC_SMPR1_SMP14_2 | \
+ ADC_SMPR1_SMP13_2 | ADC_SMPR1_SMP12_2 | ADC_SMPR1_SMP11_2 | ADC_SMPR1_SMP10_2 )
+
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 \
+ (ADC_SMPR2_SMP9_1 | ADC_SMPR2_SMP8_1 | ADC_SMPR2_SMP7_1 | ADC_SMPR2_SMP6_1 | \
+ ADC_SMPR2_SMP5_1 | ADC_SMPR2_SMP4_1 | ADC_SMPR2_SMP3_1 | ADC_SMPR2_SMP2_1 | \
+ ADC_SMPR2_SMP1_1 | ADC_SMPR2_SMP0_1)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 \
+ (ADC_SMPR1_SMP17_1 | ADC_SMPR1_SMP16_1 | ADC_SMPR1_SMP15_1 | ADC_SMPR1_SMP14_1 | \
+ ADC_SMPR1_SMP13_1 | ADC_SMPR1_SMP12_1 | ADC_SMPR1_SMP11_1 | ADC_SMPR1_SMP10_1 )
+
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0 \
+ (ADC_SMPR2_SMP9_0 | ADC_SMPR2_SMP8_0 | ADC_SMPR2_SMP7_0 | ADC_SMPR2_SMP6_0 | \
+ ADC_SMPR2_SMP5_0 | ADC_SMPR2_SMP4_0 | ADC_SMPR2_SMP3_0 | ADC_SMPR2_SMP2_0 | \
+ ADC_SMPR2_SMP1_0 | ADC_SMPR2_SMP0_0)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0 \
+ (ADC_SMPR1_SMP17_0 | ADC_SMPR1_SMP16_0 | ADC_SMPR1_SMP15_0 | ADC_SMPR1_SMP14_0 | \
+ ADC_SMPR1_SMP13_0 | ADC_SMPR1_SMP12_0 | ADC_SMPR1_SMP11_0 | ADC_SMPR1_SMP10_0 )
+
+#define ADC_SAMPLETIME_1CYCLE5_SMPR2ALLCHANNELS ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_7CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_13CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1)
+#define ADC_SAMPLETIME_28CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_41CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2)
+#define ADC_SAMPLETIME_55CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_71CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1)
+#define ADC_SAMPLETIME_239CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+
+#define ADC_SAMPLETIME_1CYCLE5_SMPR1ALLCHANNELS ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_7CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_13CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1)
+#define ADC_SAMPLETIME_28CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_41CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2)
+#define ADC_SAMPLETIME_55CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_71CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1)
+#define ADC_SAMPLETIME_239CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_regular_rank
+ * @{
+ */
+#define ADC_REGULAR_RANK_1 ((uint32_t)0x00000001)
+#define ADC_REGULAR_RANK_2 ((uint32_t)0x00000002)
+#define ADC_REGULAR_RANK_3 ((uint32_t)0x00000003)
+#define ADC_REGULAR_RANK_4 ((uint32_t)0x00000004)
+#define ADC_REGULAR_RANK_5 ((uint32_t)0x00000005)
+#define ADC_REGULAR_RANK_6 ((uint32_t)0x00000006)
+#define ADC_REGULAR_RANK_7 ((uint32_t)0x00000007)
+#define ADC_REGULAR_RANK_8 ((uint32_t)0x00000008)
+#define ADC_REGULAR_RANK_9 ((uint32_t)0x00000009)
+#define ADC_REGULAR_RANK_10 ((uint32_t)0x0000000A)
+#define ADC_REGULAR_RANK_11 ((uint32_t)0x0000000B)
+#define ADC_REGULAR_RANK_12 ((uint32_t)0x0000000C)
+#define ADC_REGULAR_RANK_13 ((uint32_t)0x0000000D)
+#define ADC_REGULAR_RANK_14 ((uint32_t)0x0000000E)
+#define ADC_REGULAR_RANK_15 ((uint32_t)0x0000000F)
+#define ADC_REGULAR_RANK_16 ((uint32_t)0x00000010)
+
+#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_10) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_11) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_12) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_13) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_14) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_15) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_16) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_rank
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004)
+
+#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_2) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_3) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_4) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTTRIG)
+
+#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Injected
+ * @{
+ */
+/* External triggers for injected groups of ADC1 */
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T19_CC1 ADC_EXTERNALTRIGINJEC_T19_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T19_CC2 ADC_EXTERNALTRIGINJEC_T19_CC2
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC_EXTERNALTRIGINJEC_EXT_IT15
+#define ADC_INJECTED_SOFTWARE_START ADC_JSWSTART
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T19_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T19_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected
+ * @{
+ */
+
+/* List of external triggers of injected group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC_EXTERNALTRIGINJEC_T19_CC1 ((uint32_t) 0x00000000)
+#define ADC_EXTERNALTRIGINJEC_T19_CC2 ((uint32_t) ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t) ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t) ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_JSWSTART ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_analog_watchdog_mode
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000)
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t) ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_conversion_group
+ * @{
+ */
+#define REGULAR_GROUP ((uint32_t)(ADC_FLAG_EOC))
+#define INJECTED_GROUP ((uint32_t)(ADC_FLAG_JEOC))
+#define REGULAR_INJECTED_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_JEOC))
+
+#define IS_ADC_CONVERSION_GROUP(CONVERSION) (((CONVERSION) == REGULAR_GROUP) || \
+ ((CONVERSION) == INJECTED_GROUP) || \
+ ((CONVERSION) == REGULAR_INJECTED_GROUP) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Event_type
+ * @{
+ */
+#define AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog event */
+
+#define IS_ADC_EVENT_TYPE(EVENT) ((EVENT) == AWD_EVENT)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_interrupts_definition
+ * @{
+ */
+#define ADC_IT_EOC ADC_CR1_EOCIE /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_JEOC ADC_CR1_JEOCIE /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IT_AWD ADC_CR1_AWDIE /*!< ADC Analog watchdog interrupt source */
+
+/* Check of single flag */
+#define IS_ADC_IT(IT) (((IT) == ADC_IT_EOC ) || \
+ ((IT) == ADC_IT_JEOC) || \
+ ((IT) == ADC_IT_AWD ) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_flags_definition
+ * @{
+ */
+#define ADC_FLAG_AWD ADC_SR_AWD /*!< ADC Analog watchdog flag */
+#define ADC_FLAG_EOC ADC_SR_EOC /*!< ADC End of Regular conversion flag */
+#define ADC_FLAG_JEOC ADC_SR_JEOC /*!< ADC End of Injected conversion flag */
+#define ADC_FLAG_JSTRT ADC_SR_JSTRT /*!< ADC Injected group start flag */
+#define ADC_FLAG_STRT ADC_SR_STRT /*!< ADC Regular group start flag */
+
+/* Combination of all post-conversion flags bits: EOC/EOS, JEOC/JEOS, OVR, AWDx */
+#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_EOC | ADC_FLAG_JEOC | ADC_FLAG_AWD )
+
+/* Check of single flag */
+#define IS_ADC_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || \
+ ((FLAG) == ADC_FLAG_EOC) || \
+ ((FLAG) == ADC_FLAG_JEOC) || \
+ ((FLAG) == ADC_FLAG_JSTRT) || \
+ ((FLAG) == ADC_FLAG_STRT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_range_verification
+ * For a unique ADC resolution: 12 bits
+ * @{
+ */
+#define IS_ADC_RANGE(ADC_VALUE) ((ADC_VALUE) <= ((uint32_t)0x0FFF))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_nb_conv_verification
+ * @{
+ */
+#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_nb_conv_verification
+ * @{
+ */
+#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number_verification
+ * @{
+ */
+#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8)))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @addtogroup ADC_Exported_Macro
+ * @{
+ */
+/* Macro for internal HAL driver usage, and possibly can be used into code of */
+/* final user. */
+
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8) || defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+#define __HAL_ADC_IS_ENABLED(__HANDLE__) \
+ (( ((((__HANDLE__)->Instance->CR) & (ADC_CR_ADEN | ADC_CR_ADDIS)) == ADC_CR_ADEN) && \
+ ((((__HANDLE__)->Instance->ISR) & ADC_FLAG_RDY) == ADC_FLAG_RDY) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CFGR & ADC_CFGR_EXTEN) == RESET)
+
+/**
+ * @brief Test if conversion trigger of injected group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
+ (((__HANDLE__)->Instance->JSQR & ADC_JSQR_JEXTEN) == RESET)
+
+/**
+ * @brief Check if no conversion on going on regular and/or injected groups
+ * @param __HANDLE__: ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & (ADC_CR_ADSTART | ADC_CR_JADSTART)) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Check if no conversion on going on regular group
+ * @param __HANDLE__: ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & ADC_CR_ADSTART) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Check if no conversion on going on injected group
+ * @param __HANDLE__: ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & ADC_CR_JADSTART) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Returns resolution bits in CFGR1 register: RES[1:0].
+ * Returned value is among parameters to @ref ADCEx_Resolution.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CFGR) & ADC_CFGR_RES)
+
+/** @brief Checks if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC interrupt source to check
+ * @retval State of interruption (SET or RESET)
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ (( ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__) \
+ )? SET : RESET \
+ )
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the ADC's pending flags
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR) = (__FLAG__))
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 || STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+#define __HAL_ADC_IS_ENABLED(__HANDLE__) \
+ ((( ((__HANDLE__)->Instance->CR2 & ADC_CR2_ADON) == ADC_CR2_ADON ) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTSEL) == ADC_SOFTWARE_START)
+
+/**
+ * @brief Test if conversion trigger of injected group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
+ (((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTSEL) == ADC_INJECTED_SOFTWARE_START)
+
+/** @brief Checks if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC interrupt source to check
+ * @retval State of interruption (SET or RESET)
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ (( ((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__) \
+ )? SET : RESET \
+ )
+
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the ADC's pending flags
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+
+#endif /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+/** @defgroup ADCEx_Exported_Macro_internal_HAL_driver
+ * @{
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8) || defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+
+/**
+ * @brief Set the ADC's sample time for Channels numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (_CHANNELNB_)))
+
+/**
+ * @brief Set the ADC's sample time for Channels numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 10)))
+
+/**
+ * @brief Set the selected regular Channel rank for rank between 1 and 4.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * (_RANKNB_)))
+
+/**
+ * @brief Set the selected regular Channel rank for rank between 5 and 9.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * ((_RANKNB_) - 5)))
+
+/**
+ * @brief Set the selected regular Channel rank for rank between 10 and 14.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * ((_RANKNB_) - 10)))
+
+/**
+ * @brief Set the selected regular Channel rank for rank between 15 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR4_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * ((_RANKNB_) - 15)))
+
+/**
+ * @brief Set the selected injected Channel rank.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_JSQR_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * (_RANKNB_) +2))
+
+
+/**
+ * @brief Set the Analog Watchdog 1 channel.
+ * @param _CHANNEL_: channel to be monitored by Analog Watchdog 1.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_AWD1CH(_CHANNEL_) ((_CHANNEL_) << 26)
+
+/**
+ * @brief Configure the channel number into Analog Watchdog 2 or 3.
+ * @param _CHANNEL_: ADC Channel
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_AWD23CR(_CHANNEL_) (1U << (_CHANNEL_))
+
+/**
+ * @brief Enable automatic conversion of injected group
+ * @param _INJECT_AUTO_CONVERSION_: Injected automatic conversion.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION(_INJECT_AUTO_CONVERSION_) ((_INJECT_AUTO_CONVERSION_) << 25)
+
+/**
+ * @brief Enable ADC injected context queue
+ * @param _INJECT_CONTEXT_QUEUE_MODE_: Injected context queue mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE(_INJECT_CONTEXT_QUEUE_MODE_) ((_INJECT_CONTEXT_QUEUE_MODE_) << 21)
+
+/**
+ * @brief Enable ADC discontinuous conversion mode for injected group
+ * @param _INJECT_DISCONTINUOUS_MODE_: Injected discontinuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS(_INJECT_DISCONTINUOUS_MODE_) ((_INJECT_DISCONTINUOUS_MODE_) << 20)
+
+/**
+ * @brief Enable ADC discontinuous conversion mode for regular group
+ * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) ((_REG_DISCONTINUOUS_MODE_) << 16)
+
+/**
+ * @brief Configures the number of discontinuous conversions for regular group.
+ * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_) (((_NBR_DISCONTINUOUS_CONV_) - 1) << 17)
+
+/**
+ * @brief Enable the ADC auto delay mode.
+ * @param _AUTOWAIT_: Auto delay bit enable or disable.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_AUTOWAIT(_AUTOWAIT_) ((_AUTOWAIT_) << 14)
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 13)
+
+/**
+ * @brief Enable ADC overrun mode.
+ * @param _OVERRUN_MODE_: Overrun mode.
+ * @retval Overrun bit setting to be programmed into CFGR register
+ */
+/* Note: Bit ADC_CFGR_OVRMOD not used directly in constant */
+/* "OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it as the */
+/* default case to be compliant with other STM32 devices. */
+#define __HAL_ADC_CFGR_OVERRUN(_OVERRUN_MODE_) \
+ ( ( (_OVERRUN_MODE_) != (OVR_DATA_PRESERVED) \
+ )? (ADC_CFGR_OVRMOD) : (0x00000000) \
+ )
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMACONTREQ_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << 1)
+
+/**
+ * @brief For devices with 3 ADCs or more: Defines the external trigger source
+ * for regular group according to ADC into common group ADC1&ADC2 or
+ * ADC3&ADC4 (some triggers with same source have different value to
+ * be programmed into ADC EXTSEL bits of CFGR register).
+ * Note: No risk of trigger bits value of common group ADC1&ADC2
+ * misleading to another trigger at same bits value, because the 3
+ * exceptions below are circular and do not point to any other trigger
+ * with direct treatment.
+ * For devices with 2 ADCs or less: this macro makes no change.
+ * @param __HANDLE__: ADC handle
+ * @param __EXT_TRIG_CONV__: External trigger selected for regular group.
+ * @retval External trigger to be programmed into EXTSEL bits of CFGR register
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
+ (( ((((__HANDLE__)->Instance) == ADC3) || (((__HANDLE__)->Instance) == ADC4)) \
+ )? \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T2_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T2_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T3_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T3_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T8_TRGO) \
+ : \
+ (__EXT_TRIG_CONV__) \
+ ) \
+ ) \
+ ) \
+ : \
+ (__EXT_TRIG_CONV__) \
+ )
+#else
+#define __HAL_ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
+ (__EXT_TRIG_CONV__)
+#endif /* STM32F303xC || STM32F358xx */
+
+/**
+ * @brief For devices with 3 ADCs or more: Defines the external trigger source
+ * for injected group according to ADC into common group ADC1&ADC2 or
+ * ADC3&ADC4 (some triggers with same source have different value to
+ * be programmed into ADC JEXTSEL bits of JSQR register).
+ * Note: No risk of trigger bits value of common group ADC1&ADC2
+ * misleading to another trigger at same bits value, because the 3
+ * exceptions below are circular and do not point to any other trigger
+ * with direct treatment, except trigger
+ * ADC_EXTERNALTRIGINJECCONV_T4_CC3 differentiated with SW offset.
+ * For devices with 2 ADCs or less: this macro makes no change.
+ * @param __HANDLE__: ADC handle
+ * @param __EXT_TRIG_INJECTCONV__: External trigger selected for injected group
+ * @retval External trigger to be programmed into JEXTSEL bits of JSQR register
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_JSQR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
+ (( ((((__HANDLE__)->Instance) == ADC3) || (((__HANDLE__)->Instance) == ADC4)) \
+ )? \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T2_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T4_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4 \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T8_CC4) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T4_CC3 \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T4_CC3) \
+ : \
+ (__EXT_TRIG_INJECTCONV__) \
+ ) \
+ ) \
+ ) \
+ ) \
+ : \
+ (__EXT_TRIG_INJECTCONV__) \
+ )
+#else
+#define __HAL_ADC_JSQR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
+ (__EXT_TRIG_INJECTCONV__)
+#endif /* STM32F303xC || STM32F358xx */
+
+/**
+ * @brief Configure the channel number into offset OFRx register
+ * @param _CHANNEL_: ADC Channel
+ * @retval None
+ */
+#define __HAL_ADC_OFR_CHANNEL(_CHANNEL_) ((_CHANNEL_) << 26)
+
+/**
+ * @brief Configure the channel number into differential mode selection register
+ * @param _CHANNEL_: ADC Channel
+ * @retval None
+ */
+#define __HAL_ADC_DIFSEL_CHANNEL(_CHANNEL_) (1U << (_CHANNEL_))
+
+/**
+ * @brief Calibration factor in differential mode to be set into calibration register
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define __HAL_ADC_CALFACT_DIFF_SET(_Calibration_Factor_) ((_Calibration_Factor_) << 16)
+
+/**
+ * @brief Calibration factor in differential mode to be retrieved from calibration register
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define __HAL_ADC_CALFACT_DIFF_GET(_Calibration_Factor_) ((_Calibration_Factor_) >> 16)
+
+/**
+ * @brief Configure the analog watchdog high threshold into registers TR1, TR2 or TR3.
+ * @param _Threshold_: Threshold value
+ * @retval None
+ */
+#define __HAL_ADC_TRX_HIGHTHRESHOLD(_Threshold_) ((_Threshold_) << 16)
+
+/**
+ * @brief Enable the ADC DMA continuous request for ADC multimode.
+ * @param _DMAContReq_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define __HAL_ADC_CCR_MULTI_DMACONTREQ(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 13)
+
+
+/**
+ * @brief Enable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= ADC_CR_ADEN)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be enabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC can be enabled) or RESET (ADC cannot be enabled)
+ */
+#define __HAL_ADC_ENABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_ADCAL | ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | \
+ ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \
+ ) == RESET \
+ ) ? SET : RESET)
+
+/**
+ * @brief Disable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->CR |= ADC_CR_ADDIS; \
+ __HAL_ADC_CLEAR_FLAG((__HANDLE__), (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); \
+ } while(0)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC can be disabled) or RESET (ADC cannot be disabled)
+ */
+#define __HAL_ADC_DISABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN \
+ ) ? SET : RESET)
+
+
+/**
+ * @brief Shift the offset in function of the selected ADC resolution.
+ * Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0
+ * If resolution 12 bits, no shift.
+ * If resolution 10 bits, shift of 2 ranks on the left.
+ * If resolution 8 bits, shift of 4 ranks on the left.
+ * If resolution 6 bits, shift of 6 ranks on the left.
+ * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2))
+ * @param __HANDLE__: ADC handle
+ * @param _Offset_: Value to be shifted
+ * @retval None
+ */
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION(__HANDLE__, _Offset_) \
+ ((_Offset_) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2))
+
+/**
+ * @brief Shift the AWD1 threshold in function of the selected ADC resolution.
+ * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0.
+ * If resolution 12 bits, no shift.
+ * If resolution 10 bits, shift of 2 ranks on the left.
+ * If resolution 8 bits, shift of 4 ranks on the left.
+ * If resolution 6 bits, shift of 6 ranks on the left.
+ * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2))
+ * @param __HANDLE__: ADC handle
+ * @param _Threshold_: Value to be shifted
+ * @retval None
+ */
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \
+ ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2))
+
+/**
+ * @brief Shift the AWD2 and AWD3 threshold in function of the selected ADC resolution.
+ * Thresholds have to be left-aligned on bit 7.
+ * If resolution 12 bits, shift of 4 ranks on the right (the 4 LSB are discarded)
+ * If resolution 10 bits, shift of 2 ranks on the right (the 2 LSB are discarded)
+ * If resolution 8 bits, no shift.
+ * If resolution 6 bits, shift of 2 ranks on the left (the 2 LSB are set to 0)
+ * @param __HANDLE__: ADC handle
+ * @param _Threshold_: Value to be shifted
+ * @retval None
+ */
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \
+ ( ((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) != (ADC_CFGR_RES_1 | ADC_CFGR_RES_0) ? \
+ ((_Threshold_) >> (4- ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2))) : \
+ (_Threshold_) << 2 )
+
+/**
+ * @brief Defines if the selected ADC is within ADC common register ADC1_2 or ADC3_4
+ * if available (ADC2, ADC3, ADC4 availability depends on STM32 product)
+ * @param __HANDLE__: ADC handle
+ * @retval Common control register ADC1_2 or ADC3_4
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_COMMON_REGISTER(__HANDLE__) \
+ ( ( ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)) \
+ )? (ADC1_2_COMMON) : (ADC3_4_COMMON) \
+ )
+#endif /* STM32F303xC || STM32F358xx */
+#if defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8)
+#define __HAL_ADC_COMMON_REGISTER(__HANDLE__) \
+ (ADC1_2_COMMON)
+#endif /* STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 */
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+#define __HAL_ADC_COMMON_REGISTER(__HANDLE__) \
+ (ADC1_COMMON)
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+/**
+ * @brief Selection of ADC common register CCR bits MULTI[4:0]corresponding to the selected ADC (applicable for devices with several ADCs)
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_COMMON_CCR_MULTI(__HANDLE__) \
+ ( ( ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)) \
+ )? \
+ (ADC1_2_COMMON->CCR & ADC12_CCR_MULTI) \
+ : \
+ (ADC3_4_COMMON->CCR & ADC34_CCR_MULTI) \
+ )
+#endif /* STM32F303xC || STM32F358xx */
+#if defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8)
+#define __HAL_ADC_COMMON_CCR_MULTI(__HANDLE__) \
+ (ADC1_2_COMMON->CCR & ADC12_CCR_MULTI)
+#endif /* STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 */
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+#define __HAL_ADC_COMMON_CCR_MULTI(__HANDLE__) \
+ (RESET)
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+/**
+ * @brief Verification of condition for ADC start conversion: ADC must be in non-multimode, or multimode with handle of ADC master (applicable for devices with several ADCs)
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8)
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \
+ ((__HAL_ADC_COMMON_CCR_MULTI(__HANDLE__) == RESET) || (IS_ADC_MULTIMODE_MASTER_INSTANCE((__HANDLE__)->Instance)))
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 */
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \
+ (!RESET)
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+/**
+ * @brief Set handle of the other ADC sharing the same common register ADC1_2 or ADC3_4
+ * if available (ADC2, ADC3, ADC4 availability depends on STM32 product)
+ * @param __HANDLE__: ADC handle
+ * @param __HANDLE_OTHER_ADC__: other ADC handle
+ * @retval None
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \
+ ( ( ((__HANDLE__)->Instance == ADC1) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC2) \
+ : \
+ ( ( ((__HANDLE__)->Instance == ADC2) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC1) \
+ : \
+ ( ( ((__HANDLE__)->Instance == ADC3) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC4) \
+ : \
+ ( ( ((__HANDLE__)->Instance == ADC4) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC3) \
+ : \
+ ((__HANDLE_OTHER_ADC__)->Instance = NULL) \
+ ) \
+ ) \
+ ) \
+ )
+#endif /* STM32F303xC || STM32F358xx */
+#if defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8)
+#define __HAL_ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \
+ ( ( ((__HANDLE__)->Instance == ADC1) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC2) \
+ : \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC1) \
+ )
+#endif /* STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 */
+#if defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+#define __HAL_ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \
+ ((__HANDLE_OTHER_ADC__)->Instance = NULL)
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+/**
+ * @brief Set handle of the ADC slave associated to the ADC master
+ * if available (ADC2, ADC3, ADC4 availability depends on STM32 product)
+ * @param __HANDLE_MASTER__: ADC master handle
+ * @param __HANDLE_SLAVE__: ADC slave handle
+ * @retval None
+ */
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \
+ ( ( ((__HANDLE_MASTER__)->Instance == ADC1) \
+ )? \
+ ((__HANDLE_SLAVE__)->Instance = ADC2) \
+ : \
+ ( ( ((__HANDLE_MASTER__)->Instance == ADC3) \
+ )? \
+ ((__HANDLE_SLAVE__)->Instance = ADC4) \
+ : \
+ ((__HANDLE_SLAVE__)->Instance = NULL) \
+ ) \
+ )
+#endif /* STM32F303xC || STM32F358xx */
+#if defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8)
+#define __HAL_ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \
+ ( ( ((__HANDLE_MASTER__)->Instance == ADC1) \
+ )? \
+ ((__HANDLE_SLAVE__)->Instance = ADC2) \
+ : \
+ ( NULL ) \
+ )
+#endif /* STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 */
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 || STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Set ADC number of conversions into regular channel sequence length.
+ * @param _NbrOfConversion_: Regular channel sequence length
+ * @retval None
+ */
+#define __HAL_ADC_SQR1_L(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20)
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 10)))
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (_CHANNELNB_)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 1 and 6.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 1)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 7 and 12.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 7)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 13 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 13)))
+
+/**
+ * @brief Set the injected sequence length.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define __HAL_ADC_JSQR_JL(_JSQR_JL_) (((_JSQR_JL_) -1) << 20)
+
+/**
+ * @brief Set the selected injected Channel rank (channels sequence starting from 4-JL)
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define __HAL_ADC_JSQR_RK(_CHANNELNB_, _RANKNB_, _JSQR_JL_) \
+ ((_CHANNELNB_) << (5 * ((4 - ((_JSQR_JL_) - (_RANKNB_))) - 1)))
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1)
+
+/**
+ * @brief Configures the number of discontinuous conversions for the regular group channels.
+ * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_) (((_NBR_DISCONTINUOUS_CONV_) - 1) << 13)
+
+/**
+ * @brief Enable ADC scan mode to convert multiple ranks with sequencer.
+ * @param _SCAN_MODE_: Scan conversion mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR1_SCAN(_SCAN_MODE_) \
+ ( ( (_SCAN_MODE_) == (ADC_SCAN_ENABLE) \
+ )? (ADC_CR1_SCAN) : (0x00000000) \
+ )
+
+/**
+ * @brief Calibration factor in differential mode to be set into calibration register
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define __HAL_ADC_CALFACT_DIFF_SET(_Calibration_Factor_) ((_Calibration_Factor_) << 16)
+
+/**
+ * @brief Calibration factor in differential mode to be retrieved from calibration register
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define __HAL_ADC_CALFACT_DIFF_GET(_Calibration_Factor_) ((_Calibration_Factor_) >> 16)
+
+
+/**
+ * @brief Get the maximum ADC conversion cycles on all channels.
+ * Returns the selected sampling time + conversion time (12.5 ADC clock cycles)
+ * Approximation of sampling time within 4 ranges, returns the higher value:
+ * below 7.5 cycles {1.5 cycle; 7.5 cycles},
+ * between 13.5 cycles and 28.5 cycles {13.5 cycles; 28.5 cycles}
+ * between 41.5 cycles and 71.5 cycles {41.5 cycles; 55.5 cycles; 71.5cycles}
+ * equal to 239.5 cycles
+ * Unit: ADC clock cycles
+ * @param __HANDLE__: ADC handle
+ * @retval ADC conversion cycles on all channels
+ */
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) ) ? \
+ \
+ (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET) ) ? \
+ ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_7CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_28CYCLES5) \
+ : \
+ ((((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET)) || \
+ ((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET))) ? \
+ ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_71CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_239CYCLES5) \
+ )
+
+/**
+ * @brief Get the total ADC clock prescaler (APB2 prescaler x ADC prescaler)
+ * from system clock configuration register.
+ * Approximation within 3 ranges, returns the higher value:
+ * total prescaler minimum: 2 (ADC presc 2, APB2 presc 0)
+ * total prescaler 32 (ADC presc 0 and APB2 presc all, or
+ * ADC presc {4, 6, 8} and APB2 presc {0, 2, 4})
+ * total prescaler maximum: 128 (ADC presc {4, 6, 8} and APB2 presc {8, 16})
+ * Unit: none (prescaler factor)
+ * @param __HANDLE__: ADC handle
+ * @retval ADC and APB2 prescaler factor
+ */
+#define __HAL_ADC_CLOCK_PRECSALER_RANGE(__HANDLE__) \
+ (( (RCC->CFGR & (RCC_CFGR_ADCPRE_1 | RCC_CFGR_ADCPRE_0)) == RESET) ? \
+ (( (RCC->CFGR & RCC_CFGR_PPRE2_2) == RESET) ? 2 : 32 ) \
+ : \
+ (( (RCC->CFGR & RCC_CFGR_PPRE2_1) == RESET) ? 32 : 128 ) \
+ )
+
+/**
+ * @brief Get the ADC clock prescaler from system clock configuration register.
+ * @retval None
+ */
+#define __HAL_ADC_GET_CLOCK_PRESCALER() (((RCC->CFGR & RCC_CFGR_ADCPRE) >> 14) +1)
+
+/**
+ * @brief Enable the ADC peripheral (if not already enable to not trig a conversion)
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) \
+ (__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON
+
+/**
+ * @brief Disable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) \
+ (__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON
+
+#endif /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+
+
+/* Initialization/de-initialization functions *********************************/
+
+/* I/O operation functions ****************************************************/
+
+/* ADC calibration */
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8) || defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(struct __ADC_HandleTypeDef* hadc, uint32_t SingleDiff);
+uint32_t HAL_ADCEx_Calibration_GetValue(struct __ADC_HandleTypeDef *hadc, uint32_t SingleDiff);
+HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(struct __ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor);
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 || STM32F301x8 || STM32F318xx || STM32F302x8 */
+#if defined(STM32F373xC) || defined(STM32F378xx)
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(struct __ADC_HandleTypeDef* hadc);
+#endif /* STM32F373xC || STM32F378xx */
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(struct __ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(struct __ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(struct __ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(struct __ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(struct __ADC_HandleTypeDef* hadc);
+
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8) || defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+/* ADC multimode */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(struct __ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(struct __ADC_HandleTypeDef *hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(struct __ADC_HandleTypeDef *hadc);
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 || STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADCEx_InjectedGetValue(struct __ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
+void HAL_ADCEx_InjectedConvCpltCallback(struct __ADC_HandleTypeDef* hadc);
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8) || defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+void HAL_ADCEx_InjectedQueueOverflowCallback(struct __ADC_HandleTypeDef* hadc);
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 || STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(struct __ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+#if defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F302xC) || defined(STM32F303x8) || defined(STM32F328xx) || defined(STM32F334x8) || defined(STM32F301x8) || defined(STM32F318xx) || defined(STM32F302x8)
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(struct __ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode);
+#endif /* STM32F303xC || STM32F358xC || STM32F302xC || STM32F303x8 || STM32F328xx || STM32F334x8 || STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_can.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,782 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_can.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_CAN_H
+#define __STM32F3xx_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+ defined(STM32F334x8) || \
+ defined(STM32F328xx) || defined(STM32F358xx) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03, /*!< CAN in Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief HAL CAN Error Code structure definition
+ */
+typedef enum
+{
+ HAL_CAN_ERROR_NONE = 0x00, /*!< No error */
+ HAL_CAN_ERROR_EWG = 0x01, /*!< EWG error */
+ HAL_CAN_ERROR_EPV = 0x02, /*!< EPV error */
+ HAL_CAN_ERROR_BOF = 0x04, /*!< BOF error */
+ HAL_CAN_ERROR_STF = 0x08, /*!< Stuff error */
+ HAL_CAN_ERROR_FOR = 0x10, /*!< Form error */
+ HAL_CAN_ERROR_ACK = 0x20, /*!< Acknowledgment error */
+ HAL_CAN_ERROR_BR = 0x40, /*!< Bit recessive */
+ HAL_CAN_ERROR_BD = 0x80, /*!< LEC dominant */
+ HAL_CAN_ERROR_CRC = 0x100 /*!< LEC transfer error */
+}HAL_CAN_ErrorTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE. */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ __IO HAL_CAN_ErrorTypeDef ErrorCode; /*!< CAN Error code */
+
+}CAN_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CAN_InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED ((uint32_t)0x00000000) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS ((uint32_t)0x00000001) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode
+ * @{
+ */
+#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_synchronisation_jump_width
+ * @{
+ */
+#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1
+ * @{
+ */
+#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2
+ * @{
+ */
+#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler
+ * @{
+ */
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number
+ * @{
+ */
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+
+/* Legacy defines */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Start_bank_filter_for_slave_CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx
+ * @{
+ */
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type
+ * @{
+ */
+#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request
+ * @{
+ */
+#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants
+ * @{
+ */
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00) /*!< CAN transmission failed */
+#define CAN_TXSTATUS_OK ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 ((uint32_t)0x0000051A) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 ((uint32_t)0x0000051B) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 ((uint32_t)0x0000051C) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 ((uint32_t)0x00000203) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x00000204) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 ((uint32_t)0x00000403) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x00000404) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */
+#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */
+#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_BOF) || \
+ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_SLAK) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0))
+
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_RQCP1) || \
+ ((FLAG) == CAN_FLAG_RQCP0) || ((FLAG) == CAN_FLAG_FF0) || \
+ ((FLAG) == CAN_FLAG_FOV0) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_WKU))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+
+#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
+ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
+ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
+ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+/**
+ * @}
+ */
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x00FFFFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x00FFFFFF)
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__: CAN handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts
+ * @param __HANDLE__: CAN handle.
+ * @param __INTERRUPT__: CAN Interrupt.
+ * @retval None.
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts
+ * @param __HANDLE__: CAN handle.
+ * @param __INTERRUPT__: CAN Interrupt.
+ * @retval None.
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__: CAN handle.
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0)
+
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __INTERRUPT__: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+
+
+/**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__: CAN handle.
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None.
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval None.
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disables the DBG Freeze for CAN.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __NEWSTATE__: new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+
+/* Peripheral State and Error functions ***************************************/
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F302x8) || defined(STM32F302xC) || */
+ /* defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || */
+ /* defined(STM32F334x8) || */
+ /* defined(STM32F328xx) || defined(STM32F358xx) || defined(STM32F378xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_cec.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,562 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_cec.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CEC_H
+#define __STM32F3xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
+ It can be one of @ref CEC_Signal_Free_Time
+ and belongs to the set {0,...,7} where
+ 0x0 is the default configuration
+ else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+ uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+ it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+ or CEC_EXTENDED_TOLERANCE */
+
+ uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+ CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ CEC_RX_STOP_ON_BRE: reception is stopped. */
+
+ uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Bit Rising Error detection.
+ CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+
+ uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Long Bit Period Error detection.
+ CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+
+ uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+ upon an error detected on a broadcast message.
+
+ It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+ 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+ b) LBPE detection: error-bit generation on the CEC line
+ if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+ 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+ there is no error-bit generation in case of Short Bit Period Error detection in
+ a broadcast message while LSTN bit is set. */
+
+ uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+ CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+
+ uint32_t OwnAddress; /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
+
+ uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+ CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ own address (OAR). Messages addressed to different destination are ignored.
+ Broadcast messages are always received.
+
+ CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ address (OAR) with positive acknowledge. Messages addressed to different destination
+ are received, but without interfering with the CEC bus: no acknowledge sent. */
+
+ uint8_t InitiatorAddress; /* Initiator address (source logical address, sent in each header) */
+
+}CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State structures definition
+ */
+typedef enum
+{
+ HAL_CEC_STATE_RESET = 0x00, /*!< Peripheral Reset state */
+ HAL_CEC_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_CEC_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_CEC_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_CEC_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_CEC_STATE_STANDBY_RX = 0x05, /*!< IP ready to receive, doesn't prevent IP to transmit */
+ HAL_CEC_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_CEC_STATE_ERROR = 0x07 /*!< State Error */
+}HAL_CEC_StateTypeDef;
+
+/**
+ * @brief HAL Error structures definition
+ */
+typedef enum
+{
+ HAL_CEC_ERROR_NONE = (uint32_t) 0x0, /*!< no error */
+ HAL_CEC_ERROR_RXOVR = CEC_ISR_RXOVR, /*!< CEC Rx-Overrun */
+ HAL_CEC_ERROR_BRE = CEC_ISR_BRE, /*!< CEC Rx Bit Rising Error */
+ HAL_CEC_ERROR_SBPE = CEC_ISR_SBPE, /*!< CEC Rx Short Bit period Error */
+ HAL_CEC_ERROR_LBPE = CEC_ISR_LBPE, /*!< CEC Rx Long Bit period Error */
+ HAL_CEC_ERROR_RXACKE = CEC_ISR_RXACKE, /*!< CEC Rx Missing Acknowledge */
+ HAL_CEC_ERROR_ARBLST = CEC_ISR_ARBLST, /*!< CEC Arbitration Lost */
+ HAL_CEC_ERROR_TXUDR = CEC_ISR_TXUDR, /*!< CEC Tx-Buffer Underrun */
+ HAL_CEC_ERROR_TXERR = CEC_ISR_TXERR, /*!< CEC Tx-Error */
+ HAL_CEC_ERROR_TXACKE = CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
+}
+HAL_CEC_ErrorTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+typedef struct
+{
+ CEC_TypeDef *Instance; /* CEC registers base address */
+
+ CEC_InitTypeDef Init; /* CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /* CEC Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to CEC Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */
+
+ uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register
+ in case error is reported */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_CEC_StateTypeDef State; /* CEC communication state */
+
+}CEC_HandleTypeDef;
+
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CEC_Signal_Free_Time Signal Free Time setting parameter
+ * @{
+ */
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000)
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001)
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002)
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003)
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004)
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005)
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006)
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007)
+#define IS_CEC_SIGNALFREETIME(SFT) ((SFT) <= CEC_CFGR_SFT)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000)
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
+#define IS_CEC_TOLERANCE(RXTOL) (((RXTOL) == CEC_STANDARD_TOLERANCE) || \
+ ((RXTOL) == CEC_EXTENDED_TOLERANCE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BRERxStop Reception Stop on Error
+ * @{
+ */
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000)
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
+#define IS_CEC_BRERXSTOP(BRERXSTOP) (((BRERXSTOP) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((BRERXSTOP) == CEC_RX_STOP_ON_BRE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BREErrorBitGen Error Bit Generation if Bit Rise Error reported
+ * @{
+ */
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
+#define IS_CEC_BREERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BRE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_LBPEErrorBitGen Error Bit Generation if Long Bit Period Error reported
+ * @{
+ */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
+#define IS_CEC_LBPEERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_LBPE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen Error Bit Generation on Broadcast message
+ * @{
+ */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(ERRORBITGEN) (((ERRORBITGEN) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_SFT_Option Signal Free Time start option
+ * @{
+ */
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000)
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
+#define IS_CEC_SFTOP(SFTOP) (((SFTOP) == CEC_SFT_START_ON_TXSOM) || \
+ ((SFTOP) == CEC_SFT_START_ON_TX_RX_END))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Listening_Mode Listening mode option
+ * @{
+ */
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000)
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
+#define IS_CEC_LISTENING_MODE(MODE) (((MODE) == CEC_REDUCED_LISTENING_MODE) || \
+ ((MODE) == CEC_FULL_LISTENING_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR all RX or TX errors flags in CEC ISR register
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_TX all TX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OAR_Position Device Own Address position in CEC CFGR register
+ * @{
+ */
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle state
+ * @param __HANDLE__: CEC handle.
+ * @retval None
+ */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
+
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+
+/** @brief Clears the interrupt or status flag when raised (write at 1)
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the interrupt/status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR = (__FLAG__))
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
+ * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+
+
+/* Peripheral State and Error functions ***************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F373xC) || defined(STM32F378xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_comp.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,228 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_comp.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of COMP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_COMP_H
+#define __STM32F3xx_HAL_COMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup COMP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief COMP Init structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t InvertingInput; /*!< Selects the inverting input of the comparator.
+ This parameter can be a value of @ref COMPEx_InvertingInput */
+
+ uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator.
+ This parameter can be a value of @ref COMPEx_NonInvertingInput
+ Note: Only available on STM32F302xB/xC, STM32F303xB/xC and STM32F358xx devices */
+
+ uint32_t Output; /*!< Selects the output redirection of the comparator.
+ This parameter can be a value of @ref COMPEx_Output */
+
+ uint32_t OutputPol; /*!< Selects the output polarity of the comparator.
+ This parameter can be a value of @ref COMP_OutputPolarity */
+
+ uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
+ This parameter can be a value of @ref COMPEx_Hysteresis
+ Note: Only available on STM32F302xB/xC, STM32F303xB/xC, STM32F373xB/xC, STM32F358xx and STM32F378xx devices */
+
+ uint32_t BlankingSrce; /*!< Selects the output blanking source of the comparator.
+ This parameter can be a value of @ref COMPEx_BlankingSrce
+ Note: Not available on STM32F373xB/C and STM32F378xx devices */
+
+ uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator
+ to adjust the speed/consumption.
+ This parameter can be a value of @ref COMPEx_Mode
+ Note: Not available on STM32F301x6/x8, STM32F302x6/x8, STM32F334x6/x8, STM32F318xx and STM32F328xx devices */
+
+ uint32_t WindowMode; /*!< Selects the window mode of the comparator X (X=2, 4 or 6 if available).
+ This parameter can be a value of @ref COMPEx_WindowMode */
+
+ uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode).
+ This parameter can be a value of @ref COMP_TriggerMode */
+
+}COMP_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */
+ HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */
+ HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */
+ HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */
+ HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */
+}HAL_COMP_StateTypeDef;
+
+
+/**
+ * @brief PPP Handle Structure definition
+ */
+typedef struct
+{
+ COMP_TypeDef *Instance; /*!< Register base address */
+ COMP_InitTypeDef Init; /*!< COMP required parameters */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */
+
+}COMP_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_Exported_Constants
+ * @{
+ */
+
+/** @defgroup COMP_OutputPolarity
+ * @{
+ */
+#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */
+#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */
+#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \
+ ((POL) == COMP_OUTPUTPOL_INVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_OutputLevel
+ * @{
+ */
+/* When output polarity is not inverted, comparator output is low when
+ the non-inverting input is at a lower voltage than the inverting input*/
+#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000)
+/* When output polarity is not inverted, comparator output is high when
+ the non-inverting input is at a higher voltage than the inverting input */
+#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMPxOUT
+/**
+ * @}
+ */
+
+/** @defgroup COMP_TriggerMode
+ * @{
+ */
+#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING))
+/**
+ * @}
+ */
+
+#define COMP_LOCK_DISABLE ((uint32_t)0x00000000)
+#define COMP_LOCK_ENABLE COMP_CSR_COMPxLOCK
+
+#define COMP_STATE_BIT_LOCK ((uint32_t)0x10)
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset COMP handle state
+ * @param __HANDLE__: COMP handle.
+ * @retval None
+ */
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
+
+/* Include COMP HAL Extension module */
+#include "stm32f3xx_hal_comp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+
+/* Callback in Interrupt mode */
+void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_comp_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1260 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_comp_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of COMP HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_COMP_EX_H
+#define __STM32F3xx_HAL_COMP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup COMPEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @addtogroup COMPEx_Exported_Constants
+ * @{
+ */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_InvertingInput COMP_InvertingInput (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2, PD15 for COMP3,
+ PE8 for COMP4, PD13 for COMP5, PD10 for COMP6,
+ PC0 for COMP7) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO2 COMP_CSR_COMPxINSEL /*!< I/O2 (PB12 for COMP3, PB2 for COMP4, PB10 for COMP5,
+ PB15 for COMP6) connected to comparator inverting input */
+/* Aliases for compatibility */
+#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO2))
+/**
+ * @}
+ */
+#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup COMPEx_InvertingInput COMP_InvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
+ * @{
+ */
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6)
+ connected to comparator inverting input */
+/* Aliases for compatibility */
+#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1))
+/**
+ * @}
+ */
+#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup COMPEx_InvertingInput COMP_InvertingInput (STM32F303x8/STM32F334x8/STM32F328xx Product devices)
+ * @{
+ */
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6)
+ connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC2_CH1 COMP_CSR_COMPxINSEL_3 /*!< DAC2_CH1_OUT connected to comparator inverting input */
+/* Aliases for compatibility */
+#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1))
+/**
+ * @}
+ */
+#elif defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup COMPEx_InvertingInput COMP_InvertingInput (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_0) /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_1) /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT ((uint32_t)(COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0)) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH1 ((uint32_t)COMP_CSR_COMPxINSEL_2) /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH2 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0)) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1)) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC2_CH1 ((uint32_t)COMP_CSR_COMPxINSEL) /*!< DAC2_CH1_OUT connected to comparator inverting input */
+/* Aliases for compatibility */
+#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1))
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_NonInvertingInput COMPEx_NonInvertingInput (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3,
+ PB0 for COMP4, PD12 for COMP5, PD11 for COMP6,
+ PA0 for COMP7) connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_IO2 COMP_CSR_COMPxNONINSEL /*!< I/O2 (PA3 for COMP2, PD14 for COMP3, PE7 for COMP4, PB13 for COMP5,
+ PB11 for COMP6, PC1 for COMP7) connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP1_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+
+/* STM32F302xB/xC, STM32F303xB/xC, STM32F358xx devices comparator instances non inverting source values */
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
+ ((((INSTANCE) == COMP1) && \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
+ || \
+ ((((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_IO2))))
+
+#define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMPxNONINSEL | COMP1_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
+/**
+ * @}
+ */
+#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup COMPEx_NonInvertingInput COMPEx_NonInvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6)
+ connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP2_CSR_COMP2INPDAC /*!< DAC ouput connected to comparator COMP2 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+
+/* STM32F301x6/x8, STM32F302x6/x8, STM32F318xx devices comparator instances non inverting source values */
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
+ ((((INSTANCE) == COMP2) && \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
+ || \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
+
+#define COMP_CSR_COMPxNONINSEL_MASK (COMP2_CSR_COMP2INPDAC) /*!< COMP_CSR_COMPxNONINSEL mask */
+/**
+ * @}
+ */
+#elif defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup COMPEx_NonInvertingInput COMPEx_NonInvertingInput (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2)
+ connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+
+/* STM32F373xB/xC, STM32F378xx devices comparator instances non inverting source values */
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
+ ((((INSTANCE) == COMP1) && \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
+ || \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
+
+#define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
+/**
+ * @}
+ */
+#else
+/** @defgroup COMPEx_NonInvertingInput COMPEx_NonInvertingInput (Other Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6)
+ connected to comparator non inverting input */
+/*!< Non inverting input not available */
+#define IS_COMP_NONINVERTINGINPUT(INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */
+
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */
+
+#define COMP_CSR_COMPxNONINSEL_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_Output COMPEx_Output (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP1...COMP7 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM8BKIN ((uint32_t)0x00000C00) /*!< COMP output connected to TIM8 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM8BKIN2 ((uint32_t)0x00001000) /*!< COMP output connected to TIM8 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 and TIM8 Break Input 2 */
+/* Output Redirection common for COMP1, COMP2 and COMP3 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+/* Output Redirection common for COMP1 and COMP2 */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP3 */
+#define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM4 Input Capture 1 */
+#define COMP_OUTPUT_TIM3IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM3 Input Capture 2 */
+#define COMP_OUTPUT_TIM15IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 Input Capture 1 */
+#define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM15 Break Input (BKIN) */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP5 */
+#define COMP_OUTPUT_TIM2IC1 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 1 */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_TIM17IC1 ((uint32_t)0x00002000) /*!< COMP output connected to TIM17 Input Capture 1 */
+#define COMP_OUTPUT_TIM4IC3 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 3 */
+#define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
+/* Output Redirection specific to COMP7 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_TIM2IC3 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 3 */
+#define COMP_OUTPUT_TIM1IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM1 Input Capture 2 */
+#define COMP_OUTPUT_TIM17OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM17BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM16 Break Input (BKIN) */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))
+/**
+ * @}
+ */
+#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup COMPEx_Output COMPEx_Output (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP2, COMP4 and COMP6 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+/* Output Redirection specific to COMP2 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))
+/**
+ * @}
+ */
+#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup COMPEx_Output COMPEx_Output (STM32F303x8/STM32F334x8/STM32F328xx Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP2, COMP4 and COMP6 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+/* Output Redirection specific to COMP2 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))
+/**
+ * @}
+ */
+#else
+/** @defgroup COMPEx_Output COMPEx_Output (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+/* Output Redirection common for all comparators COMP1 and COMP2 */
+#define COMP_OUTPUT_NONE ((uint32_t)0x0000) /*!< COMP output isn't connected to other peripherals */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x0200) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x0300) /*!< COMP output connected to TIM3 OCREF Clear */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x0400) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x0500) /*!< COMP output connected to TIM2 OCREF Clear */
+/* Output Redirection specific to COMP1 */
+#define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x0100) /*!< COMP output connected to TIM15 Break Input */
+#define COMP_OUTPUT_TIM5IC4 ((uint32_t)0x0600) /*!< COMP output connected to TIM5 Input Capture 4 */
+#define COMP_OUTPUT_TIM5OCREFCLR ((uint32_t)0x0700) /*!< COMP output connected to TIM5 OCREF Clear */
+/* Output Redirection specific to COMP2 */
+#define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x0100) /*!< COMP output connected to TIM16 Break Input */
+#define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x0200) /*!< COMP output connected to TIM4 Input Capture 1 */
+#define COMP_OUTPUT_TIM4OCREFCLR ((uint32_t)0x0300) /*!< COMP output connected to TIM4 OCREF Clear */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM5IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM5OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16BKIN))
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_WindowMode COMPEx_WindowMode (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
+#define COMP_WINDOWMODE_ENABLED COMP_CSR_COMPxWNDWEN /*!< Window mode enabled: non inverting input of comparator X (x=2,4,6)
+ is connected to the non inverting input of comparator X-1 */
+#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
+ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
+
+#define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */
+/**
+ * @}
+ */
+#elif defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup COMPEx_WindowMode COMPEx_WindowMode (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
+#define COMP_WINDOWMODE_ENABLED ((uint32_t)COMP_CSR_COMPxWNDWEN) /*!< Window mode enabled: non inverting input of comparator 2
+ is connected to the non inverting input of comparator 1 (PA1) */
+#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
+ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
+
+#define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */
+/**
+ * @}
+ */
+#else
+/** @defgroup COMPEx_WindowMode COMPEx_WindowMode (Other Product devices)
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled (not available) */
+
+#define IS_COMP_WINDOWMODE(WINDOWMODE) ((WINDOWMODE) == (WINDOWMODE)) /*!< Not available: check always true */
+
+#define COMP_CSR_COMPxWNDWEN_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+/** @defgroup COMPEx_Mode
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+
+/* Please refer to the electrical characteristics in the device datasheet for
+ the power consumption values */
+#define COMP_MODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */
+#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMPxMODE_0 /*!< Medium Speed */
+#define COMP_MODE_LOWPOWER COMP_CSR_COMPxMODE_1 /*!< Low power mode */
+#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMPxMODE /*!< Ultra-low power mode */
+
+#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
+ ((MODE) == COMP_MODE_MEDIUMSPEED) || \
+ ((MODE) == COMP_MODE_LOWPOWER) || \
+ ((MODE) == COMP_MODE_ULTRALOWPOWER))
+
+#define COMP_CSR_COMPxMODE_MASK COMP_CSR_COMPxMODE /*!< COMP_CSR_COMPxMODE Mask */
+
+#else
+
+/*!< Power mode not available */
+#define IS_COMP_MODE(MODE) ((MODE) == (MODE)) /*!< Not available: check always true */
+
+#define COMP_CSR_COMPxMODE_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_Hysteresis
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+
+#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
+#define COMP_HYSTERESIS_LOW COMP_CSR_COMPxHYST_0 /*!< Hysteresis level low */
+#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMPxHYST_1 /*!< Hysteresis level medium */
+#define COMP_HYSTERESIS_HIGH COMP_CSR_COMPxHYST /*!< Hysteresis level high */
+
+#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
+
+#define COMP_CSR_COMPxHYST_MASK COMP_CSR_COMPxHYST /*!< COMP_CSR_COMPxHYST Mask */
+
+#else
+
+#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
+
+#define IS_COMP_HYSTERESIS(HYSTERESIS) ((HYSTERESIS) == (HYSTERESIS)) /*!< Not available: check always true */
+
+#define COMP_CSR_COMPxHYST_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup COMPEx_BlankingSrce COMPEx_BlankingSrce (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices)
+ * @{
+ */
+/* No blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
+/* Blanking source for COMP2 */
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for compartor */
+/* Blanking source for COMP4 */
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for compartor */
+/* Blanking source for COMP6 */
+#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */
+#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
+
+/* STM32F301x6/x8, STM32F302x6/x8, STM32F303x6/x8, STM32F334x4/6/8, STM32F318xx/STM32F328xx devices comparator instances blanking source values */
+#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
+ ((((INSTANCE) == COMP2) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
+ || \
+ (((INSTANCE) == COMP4) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
+ || \
+ (((INSTANCE) == COMP6) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
+
+#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_ExtiLineEvent COMPEx_ExtiLineEvent (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices)
+ * Elements values convention: XXXXZYYY
+ * - XXXX : Interrupt mask in the register list where Z equal 0x0
+ * - YYY : Interrupt mask in the register list where Z equal 0x1
+ * - Z : register index(4bits)
+ * - 0x0: EMR/IMR/RTSR/FTSR register
+ * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
+ * @{
+ */
+#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
+#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
+#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
+
+/**
+ * @}
+ */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F302xC)
+/** @defgroup COMPEx_BlankingSrce COMPEx_BlankingSrce (STM32F302xC Product devices)
+ * @{
+ */
+/* No blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
+/* Blanking source common for COMP1 and COMP2 */
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */
+/* Blanking source common for COMP1 and COMP2 */
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for compartor */
+/* Blanking source common for COMP1 and COMP2 */
+#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for compartor */
+/* Blanking source for COMP4 */
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for compartor */
+/* Blanking source for COMP6 */
+#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */
+
+#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
+
+/* STM32F302xB/STM32F302xC devices comparator instances blanking source values */
+#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
+ (((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
+ || \
+ (((INSTANCE) == COMP4) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
+ || \
+ (((INSTANCE) == COMP6) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
+
+#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_ExtiLineEvent COMPEx_ExtiLineEvent (STM32F302xC Product devices)
+ * Elements values convention: XXXXZYYY
+ * - XXXX : Interrupt mask in the register list where Z equal 0x0
+ * - YYY : Interrupt mask in the register list where Z equal 0x1
+ * - Z : register index(4bits)
+ * - 0x0: EMR/IMR/RTSR/FTSR register
+ * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
+ * @{
+ */
+#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
+#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
+#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
+#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
+
+/**
+ * @}
+ */
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_BlankingSrce COMPEx_BlankingSrce (STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+/* No blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
+/* Blanking source common for COMP1, COMP2, COMP3 and COMP7 */
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */
+/* Blanking source common for COMP1 and COMP2 */
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC5 selected as blanking source for compartor */
+/* Blanking source common for COMP1, COMP2 and COMP5 */
+#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC3 selected as blanking source for compartor */
+/* Blanking source common for COMP3 and COMP6 */
+#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for compartor */
+/* Blanking source common for COMP4, COMP5, COMP6 and COMP7 */
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_CSR_COMPxBLANKING_1 /*!< TIM8 OC5 selected as blanking source for compartor */
+/* Blanking source for COMP4 */
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for compartor */
+/* Blanking source common for COMP6 and COMP7 */
+#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */
+
+#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
+
+/* STM32F303xB/STM32F303xC/STM32F358xx devices comparator instances blanking source values */
+#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
+ (((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
+ || \
+ (((INSTANCE) == COMP3) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4))) \
+ || \
+ (((INSTANCE) == COMP4) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
+ || \
+ (((INSTANCE) == COMP5) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
+ || \
+ (((INSTANCE) == COMP6) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))) \
+ || \
+ (((INSTANCE) == COMP7) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
+
+#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_ExtiLineEvent COMPEx_ExtiLineEvent (STM32F303xC/STM32F358xx Product devices)
+ * Elements values convention: XXXXZYYY
+ * - XXXX : Interrupt mask in the register list where Z equal 0x0
+ * - YYY : Interrupt mask in the register list where Z equal 0x1
+ * - Z : register index(4bits)
+ * - 0x0: EMR/IMR/RTSR/FTSR register
+ * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
+ * @{
+ */
+#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
+#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
+#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+#define COMP_EXTI_LINE_COMP3_EVENT ((uint32_t)0x20000000) /*!< External interrupt line 29 Connected to COMP3 */
+#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
+#define COMP_EXTI_LINE_COMP5_EVENT ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to COMP5 */
+#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
+#define COMP_EXTI_LINE_COMP7_EVENT ((uint32_t)0x00001002) /*!< External interrupt line 33 Connected to COMP7 */
+
+/**
+ * @}
+ */
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F373xC) ||defined(STM32F378xx)
+/** @defgroup COMPEx_BlankingSrce COMPEx_BlankingSrce (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+/* No blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
+
+#define IS_COMP_BLANKINGSRCE(SOURCE) ((SOURCE) == (SOURCE)) /*!< Not available: check always true */
+
+/* STM32F373xB/STM32F373xC/STM32F378xx devices comparator instances blanking source values */
+#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
+ ((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE))
+
+#define COMP_CSR_COMPxBLANKING_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_ExtiLineEvent COMPEx_ExtiLineEvent (STM32F373xC/STM32F378xx Product devices)
+ * Elements values convention: XXXX0000
+ * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register
+ * @{
+ */
+#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/* CSR register reset value */
+#define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000)
+#define COMP_CSR_RESET_PARAMETERS_MASK ((uint32_t)0x00003FFF)
+#define COMP_CSR_UPDATE_PARAMETERS_MASK ((uint32_t)0x00003FFE)
+/* CSR COMP1/COMP2 shift */
+#define COMP_CSR_COMP1_SHIFT 0U
+#define COMP_CSR_COMP2_SHIFT 16U
+#else
+/* CSR register reset value */
+#define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000)
+#endif /* STM32F373xC || STM32F378xx */
+/* CSR masks redefinition for internal use */
+#define COMP_CSR_COMPxINSEL_MASK COMP_CSR_COMPxINSEL /*!< COMP_CSR_COMPxINSEL Mask */
+#define COMP_CSR_COMPxOUTSEL_MASK COMP_CSR_COMPxOUTSEL /*!< COMP_CSR_COMPxOUTSEL Mask */
+#define COMP_CSR_COMPxPOL_MASK COMP_CSR_COMPxPOL /*!< COMP_CSR_COMPxPOL Mask */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+#if defined(STM32F373xC) ||defined(STM32F378xx)
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __FLAG__: specifies the COMP Exti sources to be checked.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval The state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (EXTI->PR & (__FLAG__))
+
+/**
+ * @brief Clear the COMP Exti flags.
+ * @param __FLAG__: specifies the COMP Exti sources to be cleared.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/**
+ * @brief Enable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/**
+ * @brief Enable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (EXTI->RTSR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (EXTI->RTSR &= ~(__EXTILINE__))
+
+/**
+ * @brief Enable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (EXTI->FTSR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (EXTI->FTSR &= ~(__EXTILINE__))
+
+/**
+ * @brief Init a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @note The common output selection is checked versus the COMP instance to set the right output configuration
+ * @retval None.
+ */
+#define COMP_OUTPUT_COMP2_TIM2IC4 ((uint32_t)0x0400) /*!< COMP2 output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_COMP2_TIM2OCREFCLR ((uint32_t)0x0500) /*!< COMP2 output connected to TIM4 OCREF Clear */
+#define COMP_OUTPUT_COMP2_TIM3IC1 ((uint32_t)0x0600) /*!< COMP2 output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_COMP2_TIM3OCREFCLR ((uint32_t)0x0700) /*!< COMP2 output connected to TIM3 OCREF Clear */
+
+#define COMP_INIT(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ uint32_t compoutput = (__HANDLE__)->Init.Output; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ switch((__HANDLE__)->Init.Output) \
+ { \
+ case COMP_OUTPUT_TIM2IC4: \
+ compoutput = COMP_OUTPUT_COMP2_TIM2IC4; \
+ break; \
+ case COMP_OUTPUT_TIM2OCREFCLR: \
+ compoutput = COMP_OUTPUT_COMP2_TIM2OCREFCLR; \
+ break; \
+ case COMP_OUTPUT_TIM3IC1: \
+ compoutput = COMP_OUTPUT_COMP2_TIM3IC1; \
+ break; \
+ case COMP_OUTPUT_TIM3OCREFCLR: \
+ compoutput = COMP_OUTPUT_COMP2_TIM3OCREFCLR; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ \
+ MODIFY_REG(COMP->CSR, \
+ (COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \
+ COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \
+ COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift, \
+ ((__HANDLE__)->Init.InvertingInput | \
+ (__HANDLE__)->Init.NonInvertingInput | \
+ compoutput | \
+ (__HANDLE__)->Init.OutputPol | \
+ (__HANDLE__)->Init.Hysteresis | \
+ (__HANDLE__)->Init.Mode) << regshift); \
+ \
+ if((__HANDLE__)->Init.WindowMode != COMP_WINDOWMODE_DISABLED) \
+ { \
+ COMP->CSR |= COMP_CSR_WNDWEN; \
+ } \
+ } while(0)
+
+/**
+ * @brief DeInit a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_DEINIT(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ } \
+ MODIFY_REG(COMP->CSR, \
+ COMP_CSR_RESET_PARAMETERS_MASK << regshift, \
+ COMP_CSR_RESET_VALUE << regshift); \
+ } while(0)
+
+/**
+ * @brief Start a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_START(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ } \
+ SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \
+ } while(0)
+
+/**
+ * @brief Stop a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_STOP(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ } \
+ CLEAR_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \
+ } while(0)
+
+/**
+ * @brief Lock a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_LOCK(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ } \
+ SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxLOCK << regshift); \
+ } while(0)
+
+#else
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be checked.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval The state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_COMP_EXTI_GET_FLAG(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->PR2 & (__EXTILINE__)) : (EXTI->PR & (__EXTILINE__)))
+
+/**
+ * @brief Clear the COMP Exti flags.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be cleared.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->PR2 = (__EXTILINE__)) : (EXTI->PR = (__EXTILINE__)))
+
+/**
+ * @brief Enable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->IMR2 |= (__EXTILINE__)) : (EXTI->IMR |= (__EXTILINE__)))
+
+/**
+ * @brief Disable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->IMR2 &= ~(__EXTILINE__)) : (EXTI->IMR &= ~(__EXTILINE__)))
+
+/**
+ * @brief Enable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->RTSR2 |= (__EXTILINE__)) : (EXTI->RTSR |= (__EXTILINE__)))
+
+/**
+ * @brief Disable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->RTSR2 &= ~(__EXTILINE__)) : (EXTI->RTSR &= ~(__EXTILINE__)))
+
+/**
+ * @brief Enable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->FTSR2 |= (__EXTILINE__)) : (EXTI->FTSR |= (__EXTILINE__)))
+
+/**
+ * @brief Disable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->FTSR2 &= ~(__EXTILINE__)) : (EXTI->FTSR &= ~(__EXTILINE__)))
+
+
+/**
+ * @brief Init a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_INIT(__HANDLE__) \
+ do { \
+ __IO uint32_t csrreg = 0; \
+ \
+ csrreg = READ_REG((__HANDLE__)->Instance->CSR); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxINSEL_MASK, (__HANDLE__)->Init.InvertingInput); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxNONINSEL_MASK, (__HANDLE__)->Init.NonInvertingInput); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxBLANKING_MASK, (__HANDLE__)->Init.BlankingSrce); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxOUTSEL_MASK, (__HANDLE__)->Init.Output); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxPOL_MASK, (__HANDLE__)->Init.OutputPol); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxHYST_MASK, (__HANDLE__)->Init.Hysteresis); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxMODE_MASK, (__HANDLE__)->Init.Mode); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxWNDWEN_MASK, (__HANDLE__)->Init.WindowMode); \
+ WRITE_REG((__HANDLE__)->Instance->CSR, csrreg); \
+ } while(0)
+
+/**
+ * @brief DeInit a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_DEINIT(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->CSR, COMP_CSR_RESET_VALUE)
+
+/**
+ * @brief Start a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_START(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN)
+
+/**
+ * @brief Stop a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_STOP(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN)
+
+/**
+ * @brief Lock a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxLOCK)
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMPEx_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
+ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
+ COMP_EXTI_LINE_COMP6_EVENT)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F302xC)
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMPEx_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
+ ((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
+ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
+ COMP_EXTI_LINE_COMP6_EVENT)
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMPEx_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
+ ((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
+ ((__INSTANCE__) == COMP3) ? COMP_EXTI_LINE_COMP3_EVENT : \
+ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
+ ((__INSTANCE__) == COMP5) ? COMP_EXTI_LINE_COMP5_EVENT : \
+ ((__INSTANCE__) == COMP6) ? COMP_EXTI_LINE_COMP6_EVENT : \
+ COMP_EXTI_LINE_COMP7_EVENT)
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F373xC) ||defined(STM32F378xx)
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMPEx_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
+ COMP_EXTI_LINE_COMP2_EVENT)
+#endif /* STM32F373xC || STM32F378xx */
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_COMP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_conf.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,311 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CONF_H
+#define __STM32F3xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HRTIM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SDADC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)500) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)
+ * - External clock not generated on EVAL 373
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)(1<<__NVIC_PRIO_BITS) - 1) /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/*#define USE_FULL_ASSERT 1*/
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f3xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f3xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f3xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f3xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f3xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f3xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f3xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f3xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f3xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f3xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SDADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_sdadc.h"
+#endif /* HAL_SDADC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f3xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f3xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f3xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f3xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f3xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_cortex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,164 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_cortex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CORTEX_H
+#define __STM32F3xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Preemption_Priority_Group
+ * @{
+ */
+
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLKSOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/** @brief Configures the SysTick clock source.
+ * @param __CLKSRC__: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__) \
+ do { \
+ if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK) \
+ { \
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; \
+ } \
+ else \
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; \
+ } while(0)
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_crc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,298 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_crc.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CRC_H
+#define __STM32F3xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief CRC HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */
+}HAL_CRC_StateTypeDef;
+
+
+/**
+ * @brief CRC Init Structure definition
+ */
+typedef struct
+{
+ uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
+ If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
+ X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+ In that case, there is no need to set GeneratingPolynomial field.
+ If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set */
+
+ uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
+ If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
+ 0xFFFFFFFF value. In that case, there is no need to set InitValue field.
+ If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set */
+
+ uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial. 7, 8, 16 or 32-bit long value for a polynomial degree
+ respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
+ e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
+ No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE */
+
+ uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Size_Definitions and indicates CRC length.
+ Value can be either one of
+ CRC_POLYLENGTH_32B (32-bit CRC)
+ CRC_POLYLENGTH_16B (16-bit CRC)
+ CRC_POLYLENGTH_8B (8-bit CRC)
+ CRC_POLYLENGTH_7B (7-bit CRC) */
+
+ uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse
+ is set to DEFAULT_INIT_VALUE_ENABLE */
+
+ uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
+ Can be either one of the following values
+ CRC_INPUTDATA_INVERSION_NONE no input data inversion
+ CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
+ CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
+ CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+
+ uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
+ Can be either
+ CRC_OUTPUTDATA_INVERSION_DISABLED no CRC inversion, or
+ CRC_OUTPUTDATA_INVERSION_ENABLED CRC 0x11223344 is converted into 0x22CC4488 */
+}CRC_InitTypeDef;
+
+
+/**
+ * @brief CRC Handle Structure definition
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ CRC_InitTypeDef Init; /*!< CRC configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRC Locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+ uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
+ Can be either
+ CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data)
+ CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data)
+ CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bits data)
+ Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
+ must occur if InputBufferFormat is not one of the three values listed above */
+}CRC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial
+ * @{
+ */
+#define DEFAULT_CRC32_POLY 0x04C11DB7
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_InitValue Default CRC computation initialization value
+ * @{
+ */
+#define DEFAULT_CRC_INITVALUE 0xFFFFFFFF
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used
+ * @{
+ */
+#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00)
+#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01)
+
+#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
+ ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used
+ * @{
+ */
+#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00)
+#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01)
+
+#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
+ ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the IP
+ * @{
+ */
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define CRC_POLYLENGTH_16B ((uint32_t)CRC_CR_POLYSIZE_0)
+#define CRC_POLYLENGTH_8B ((uint32_t)CRC_CR_POLYSIZE_1)
+#define CRC_POLYLENGTH_7B ((uint32_t)CRC_CR_POLYSIZE)
+#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \
+ ((LENGTH) == CRC_POLYLENGTH_16B) || \
+ ((LENGTH) == CRC_POLYLENGTH_8B) || \
+ ((LENGTH) == CRC_POLYLENGTH_7B))
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
+ * @{
+ */
+#define HAL_CRC_LENGTH_32B 32
+#define HAL_CRC_LENGTH_16B 16
+#define HAL_CRC_LENGTH_8B 8
+#define HAL_CRC_LENGTH_7B 7
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Input_Buffer_Format Input Buffer Format
+ * @{
+ */
+/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
+ * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set
+ * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for
+ * the CRC APIs to provide a correct result */
+#define CRC_INPUTDATA_FORMAT_UNDEFINED ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_FORMAT_BYTES ((uint32_t)0x00000001)
+#define CRC_INPUTDATA_FORMAT_HALFWORDS ((uint32_t)0x00000002)
+#define CRC_INPUTDATA_FORMAT_WORDS ((uint32_t)0x00000003)
+
+#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS))
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup CRC_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset CRC handle state
+ * @param __HANDLE__: CRC handle.
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Reset CRC Data Register.
+ * @param __HANDLE__: CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Set CRC INIT non-default value
+ * @param __HANDLE__ : CRC handle
+ * @param __INIT__ : 32-bit initial value
+ * @retval None.
+ */
+#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))
+
+/**
+ * @}
+ */
+
+
+/* Include CRC HAL Extension module */
+#include "stm32f3xx_hal_crc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/* Aliases for inter STM32 series compatibility */
+#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse
+#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse
+
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_crc_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,144 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_crc_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of CRC HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CRC_EX_H
+#define __STM32F3xx_HAL_CRC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes
+ * @{
+ */
+#define CRC_INPUTDATA_INVERSION_NONE ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_INVERSION_BYTE ((uint32_t)CRC_CR_REV_IN_0)
+#define CRC_INPUTDATA_INVERSION_HALFWORD ((uint32_t)CRC_CR_REV_IN_1)
+#define CRC_INPUTDATA_INVERSION_WORD ((uint32_t)CRC_CR_REV_IN)
+
+#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_WORD))
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes
+ * @{
+ */
+#define CRC_OUTPUTDATA_INVERSION_DISABLED ((uint32_t)0x00000000)
+#define CRC_OUTPUTDATA_INVERSION_ENABLED ((uint32_t)CRC_CR_REV_OUT)
+
+#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLED) || \
+ ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLED))
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup CRCEx_Exported_Macros
+ * @{
+ */
+
+/**
+ * @brief Set CRC output reversal
+ * @param __HANDLE__ : CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT)
+
+/**
+ * @brief Unset CRC output reversal
+ * @param __HANDLE__ : CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
+
+/**
+ * @brief Set CRC non-default polynomial
+ * @param __HANDLE__ : CRC handle
+ * @param __POLYNOMIAL__: 7, 8, 16 or 32-bit polynomial
+ * @retval None.
+ */
+#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
+
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CRC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_dac.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,342 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DAC_H
+#define __STM32F3xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */
+
+}HAL_DAC_StateTypeDef;
+
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DACEx_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+
+}DAC_ChannelConfTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct __DAC_HandleTypeDef
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+}DAC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DAC_Error_Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DMA underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DMA underrun error */
+#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation
+ * @{
+ */
+#define DAC_WAVEGENERATION_NONE ((uint32_t)0x00000000)
+#define DAC_WAVEGENERATION_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVEGENERATION_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WAVEGENERATION_NONE) || \
+ ((WAVE) == DAC_WAVEGENERATION_NOISE) || \
+ ((WAVE) == DAC_WAVEGENERATION_TRIANGLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_lfsrunmask_triangleamplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignement
+ * @{
+ */
+#define DAC_ALIGN_12B_R ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R ((uint32_t)0x00000008)
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation
+ * @{
+ */
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NOISE) || \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data
+ * @{
+ */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR1) || \
+ ((FLAG) == DAC_FLAG_DMAUDR2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_interrupts_definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_CR_DMAUDRIE1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_CR_DMAUDRIE2)
+
+
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR1) || \
+ ((IT) == DAC_IT_DMAUDR2))
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__: DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/* Enable the DAC peripheral */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/* Disable the DAC peripheral */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/* Set DHR12R1 alignment */
+#define __HAL_DHR12R1_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000008) + (__ALIGNEMENT__))
+
+/* Set DHR12R2 alignment */
+#define __HAL_DHR12R2_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000014) + (__ALIGNEMENT__))
+
+/* Set DHR12RD alignment */
+#define __HAL_DHR12RD_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000020) + (__ALIGNEMENT__))
+
+/* Enable the DAC interrupt */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/* Disable the DAC interrupt */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/* Get the selected DAC's flag status */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/* Clear the DAC's flag */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/* Include DAC HAL Extension module */
+#include "stm32f3xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t* pData, uint32_t Length, uint32_t alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t channel);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t channel);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t alignment, uint32_t data);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_dac_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,313 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dac_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of DAC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DAC_EX_H
+#define __STM32F3xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DACEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+ /** @defgroup DACEx_trigger_selection
+ * @{
+ */
+
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F301x8 STM32F318xx */
+
+#if defined(STM32F302x8)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F302xC */
+
+
+#if defined (STM32F303xC) || defined (STM32F358xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel
+ Use __HAL_REMAPTRIGGER_ENABLE(HAL_REMAPTRIGGER_DAC1_TRIG) for TIM3 selection */
+#define DAC_TRIGGER_T8_TRGO DAC_TRIGGER_T3_TRGO /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+ Use __HAL_REMAPTRIGGER_DISABLE(HAL_REMAPTRIGGER_DAC1_TRIG) for TIM8 selection */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F303xC || STM32F358xx */
+
+
+#if defined (STM32F303x8) || defined (STM32F328xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F303x8 || STM32F328xx */
+
+
+#if defined (STM32F373xC) || defined (STM32F378xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel (DAC1) */
+#define DAC_TRIGGER_T18_TRGO DAC_TRIGGER_T5_TRGO /*!< TIM18 TRGO selected as external conversion trigger for DAC channel (DAC2) */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F334x8)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel
+ Use __HAL_REMAPTRIGGER_ENABLE(HAL_REMAPTRIGGER_DAC1_TRIG) for TIM3 remap */
+
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel
+ Use __HAL_REMAPTRIGGER_DISABLE(HAL_REMAPTRIGGER_DAC1_TRIG3) for TIM15 selection */
+#define DAC_TRIGGER_HRTIM1_DACTRG1 DAC_TRIGGER_T15_TRGO /*!< HRTIM1 DACTRG1 selected as external conversion trigger for DAC
+ Use __HAL_REMAPTRIGGER_ENABLE(HAL_REMAPTRIGGER_DAC1_TRIG3) for HRTIM1 DACTRG1 selection */
+
+#define DAC_TRIGGER_HRTIM1_DACTRG2 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< HRTIM1 DACTRG2 selected as external conversion trigger for DAC channel (DAC1)
+ Use __HAL_REMAPTRIGGER_ENABLE(HAL_REMAPTRIGGER_DAC1_TRIG5) for HRTIM1 DACTRG2 remap */
+#define DAC_TRIGGER_HRTIM1_DACTRG3 DAC_TRIGGER_HRTIM1_DACTRG2 /*!< HRTIM1 DACTRG3 selected as external conversion trigger for DAC channel (DAC2)*/
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_HRTIM1_DACTRG2) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F334x8 */
+
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_Channel_selection
+ * @{
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000) /*!< DAC Channel 1 */
+/* Aliases for compatibility */
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1 /*!< DAC1 Channel 1 */
+
+#define IS_DAC_CHANNEL(CHANNEL) ((CHANNEL) == DAC_CHANNEL_1)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+
+#if defined (STM32F303xC) || defined (STM32F358xx) || defined(STM32F302xC)
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000) /*!< DAC Channel 1 */
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010) /*!< DAC Channel 2 */
+/* Aliases for compatibility */
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1 /*!< DAC1 Channel 1 */
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2 /*!< DAC1 Channel 2 */
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+#endif /* STM32F303xC STM32F358xx STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F373xC)|| defined (STM32F378xx) || defined (STM32F328xx)
+
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000) /*!< DAC Channel 1 */
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010) /*!< DAC Channel 2 */
+
+/* Aliases for compatibility */
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1 /*!< DAC1 Channel 1 */
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2 /*!< DAC1 Channel 2 */
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1 /*!< DAC2 Channel 1 */
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+#endif
+
+/**
+ * @}
+ */
+
+
+ /* Exported macro ------------------------------------------------------------*/
+
+/* Extension features functions ***********************************************/
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t alignment, uint32_t data1, uint32_t data2);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t Amplitude);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_HAL_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_def.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,165 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_def.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DEF
+#define __STM32F3xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00,
+ HAL_ERROR = 0x01,
+ HAL_BUSY = 0x02,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#ifndef NULL
+ #define NULL (void *) 0
+#endif
+
+#define HAL_MAX_DELAY 0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \
+ (__DMA_HANDLE_).Parent = (__HANDLE__); \
+ } while(0)
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__: specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+ #error " USE_RTOS should be 0 in the current HAL release "
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #elif defined (__TASKING__) /* TASKING Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F3xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_dma.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,420 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DMA_H
+#define __STM32F3xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+} DMA_InitTypeDef;
+
+/**
+ * @brief DMA Configuration enumeration values definition
+ */
+typedef enum
+{
+ DMA_MODE = 0, /*!< Control related DMA mode Parameter in DMA_InitTypeDef */
+ DMA_PRIORITY = 1, /*!< Control related priority level Parameter in DMA_InitTypeDef */
+
+} DMA_ControlTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01, /*!< DMA process success and ready for use */
+ HAL_DMA_STATE_READY_HALF = 0x11, /*!< DMA Half process success */
+ HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
+
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
+
+}HAL_DMA_LevelCompleteTypeDef;
+
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Channel_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+} DMA_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Data_transfer_direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_buffer_size
+ * @{
+ */
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment : Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Memory_data_size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment : Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal Mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_interrupt_enable_definitions
+ * @{
+ */
+
+#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions
+ * @{
+ */
+
+#define DMA_FLAG_GL1 ((uint32_t)0x00000001)
+#define DMA_FLAG_TC1 ((uint32_t)0x00000002)
+#define DMA_FLAG_HT1 ((uint32_t)0x00000004)
+#define DMA_FLAG_TE1 ((uint32_t)0x00000008)
+#define DMA_FLAG_GL2 ((uint32_t)0x00000010)
+#define DMA_FLAG_TC2 ((uint32_t)0x00000020)
+#define DMA_FLAG_HT2 ((uint32_t)0x00000040)
+#define DMA_FLAG_TE2 ((uint32_t)0x00000080)
+#define DMA_FLAG_GL3 ((uint32_t)0x00000100)
+#define DMA_FLAG_TC3 ((uint32_t)0x00000200)
+#define DMA_FLAG_HT3 ((uint32_t)0x00000400)
+#define DMA_FLAG_TE3 ((uint32_t)0x00000800)
+#define DMA_FLAG_GL4 ((uint32_t)0x00001000)
+#define DMA_FLAG_TC4 ((uint32_t)0x00002000)
+#define DMA_FLAG_HT4 ((uint32_t)0x00004000)
+#define DMA_FLAG_TE4 ((uint32_t)0x00008000)
+#define DMA_FLAG_GL5 ((uint32_t)0x00010000)
+#define DMA_FLAG_TC5 ((uint32_t)0x00020000)
+#define DMA_FLAG_HT5 ((uint32_t)0x00040000)
+#define DMA_FLAG_TE5 ((uint32_t)0x00080000)
+#define DMA_FLAG_GL6 ((uint32_t)0x00100000)
+#define DMA_FLAG_TC6 ((uint32_t)0x00200000)
+#define DMA_FLAG_HT6 ((uint32_t)0x00400000)
+#define DMA_FLAG_TE6 ((uint32_t)0x00800000)
+#define DMA_FLAG_GL7 ((uint32_t)0x01000000)
+#define DMA_FLAG_TC7 ((uint32_t)0x02000000)
+#define DMA_FLAG_HT7 ((uint32_t)0x04000000)
+#define DMA_FLAG_TE7 ((uint32_t)0x08000000)
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Enable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
+
+/**
+ * @brief Disable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
+
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA Channel interrupt has occurred or not.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval The state of DMA_IT (SET or RESET).
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/* Include DMA HAL Extension module */
+#include "stm32f3xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_dma_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,248 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DMA_EX_H
+#define __STM32F3xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Interrupt & Flag management */
+
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F373xC)
+/** @defgroup STM32F302xC_STM32F303xC_STM32F373xC Product devices
+ * @{
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag
+ * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+ (DMA1->ISR & (__FLAG__)))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag
+ * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+ (DMA1->IFCR = (__FLAG__)))
+
+/**
+ * @}
+ */
+
+#else
+
+/** @defgroup STM32F301x8_STM32F302x8_STM32F303x8_STM32F334x8 Product devices
+ * @{
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ DMA_FLAG_TC7)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ DMA_FLAG_HT7)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ DMA_FLAG_TE7)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag
+ * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag
+ * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR |= (__FLAG__))
+
+/**
+ * @}
+ */
+
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_flash.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,504 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of Flash HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_H
+#define __STM32F3xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Error source
+ */
+typedef enum
+{
+ FLASH_ERROR_PG = 0x01,
+ FLASH_ERROR_WRP = 0x02
+} FLASH_ErrorTypeDef;
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
+ This parameter can be a value of @ref FLASH_Type_Erase */
+
+ uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Address */
+
+ uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
+ This parameter must be a value between 1 and (max number of pages - value of initial page)*/
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Options bytes program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< OptionType: Option byte to be configured.
+ This parameter can be a value of @ref FLASH_OB_Type */
+
+ uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASH_OB_WRP_State */
+
+ uint32_t WRPPage; /*!< WRPSector: specifies the page(s) to be write protected
+ This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+ uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
+ This parameter can be a value of @ref FLASH_OB_Read_Protection */
+
+ uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
+ IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY / SDADC12_VDD_MONITOR
+ This parameter can be a combination of @ref FLASH_OB_IWatchdog, @ref FLASH_OB_nRST_STOP,
+ @ref FLASH_OB_nRST_STDBY, @ref FLASH_OB_BOOT1, @ref FLASH_OB_VDDA_Analog_Monitoring,
+ @ref FLASH_OB_SRAM_Parity_Enable and @ref FLASH_OB_SDADC12_VDD_MONITOR */
+
+ uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be prgrammed
+ This parameter can be a value of @ref FLASH_OB_Data_Address */
+
+ uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
+ This parameter can have any value */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_PAGEERASE = 1,
+ FLASH_PROC_MASSERASE = 2,
+ FLASH_PROC_PROGRAMHALFWORD = 3,
+ FLASH_PROC_PROGRAMWORD = 4,
+ FLASH_PROC_PROGRAMDOUBLEWORD = 5
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t DataRemaining; /* Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+ __IO uint32_t Address; /* Internal variable to save address selected for program or erase */
+
+ __IO uint64_t Data; /* Internal variable to save data to be programmed */
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
+
+} FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define TYPEERASE_PAGES ((uint32_t)0x00) /*!<Pages erase only*/
+#define TYPEERASE_MASSERASE ((uint32_t)0x01) /*!<Flash mass erase activation*/
+
+#define IS_TYPEERASE(VALUE) (((VALUE) == TYPEERASE_PAGES) || \
+ ((VALUE) == TYPEERASE_MASSERASE))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!<Program a half-word (16-bit) at a specified address.*/
+#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!<Program a word (32-bit) at a specified address.*/
+#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!<Program a double word (64-bit) at a specified address*/
+
+#define IS_TYPEPROGRAM(VALUE) (((VALUE) == TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == TYPEPROGRAM_WORD) || \
+ ((VALUE) == TYPEPROGRAM_DOUBLEWORD))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_WRP_State FLASH WRP State
+ * @{
+ */
+#define WRPSTATE_DISABLE ((uint32_t)0x00) /*!<Disable the write protection of the desired pages*/
+#define WRPSTATE_ENABLE ((uint32_t)0x01) /*!<Enable the write protection of the desired pagess*/
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == WRPSTATE_DISABLE) || \
+ ((VALUE) == WRPSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!<WRP option byte configuration*/
+#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!<RDP option byte configuration*/
+#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/
+#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/
+
+#define IS_OPTIONBYTE(VALUE) (((VALUE) < (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency
+ * @{
+ */
+#define FLASH_LATENCY_0 ((uint8_t)0x0000) /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two Latency cycles */
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Data_Address
+ * @{
+ */
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Read_Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1 ((uint8_t)0xBB)
+#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2
+ it's no more possible to go back to level 1 or 0 */
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint8_t)0x01) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_nRST_STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x02) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_nRST_STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x04) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_BOOT1
+ * @{
+ */
+#define OB_BOOT1_RESET ((uint8_t)0x00) /*!< BOOT1 Reset */
+#define OB_BOOT1_SET ((uint8_t)0x10) /*!< BOOT1 Set */
+#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_VDDA_Analog_Monitoring
+ * @{
+ */
+#define OB_VDDA_ANALOG_ON ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */
+#define OB_VDDA_ANALOG_OFF ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */
+#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_SRAM_Parity_Enable
+ * @{
+ */
+#define OB_SRAM_PARITY_SET ((uint8_t)0x00) /*!< SRAM parity enable set */
+#define OB_SRAM_PARITY_RESET ((uint8_t)0x40) /*!< SRAM parity enable reset */
+#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_SDADC12_VDD_MONITOR
+ * @{
+ */
+#define OB_SDADC12_VDD_MONITOR_SET ((uint8_t)0x80) /*!< SDADC12_VDD power supply supervisor set */
+#define OB_SDADC12_VDD_MONITOR_RESET ((uint8_t)0x00) /*!< SDADC12_VDD power supply supervisor reset */
+#define IS_OB_SDADC12_VDD_MONITOR(MONITOR) (((MONITOR) == OB_SDADC12_VDD_MONITOR_SET) || ((MONITOR) == OB_SDADC12_VDD_MONITOR_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+#define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFC3) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_PGERR) || \
+ ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_EOP))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && ((IT) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Timeout_definition
+ * @brief FLASH Timeout definition
+ * @{
+ */
+#define HAL_FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Macros
+ * @brief macros to control FLASH features
+ * @{
+ */
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval None
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @param None
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @param None
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+ * @brief Enable the FLASH half cycle access.
+ * @param None
+ * @retval None
+ */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE() (FLASH->ACR |= FLASH_ACR_HLFCYA)
+
+/**
+ * @brief Disable the FLASH half cycle access.
+ * @param None
+ * @retval None
+ */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f3xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions
+ * @{
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/* Peripheral State and Error functions ***************************************/
+FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_flash_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,225 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of Flash HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_EX_H
+#define __STM32F3xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Constants
+ * @{
+ */
+#define FLASH_SIZE_DATA_REGISTER ((uint32_t)0x1FFFF7CC)
+#define FLASH_PAGE_SIZE 0x800
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Address
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100) ? \
+ ((ADDRESS) <= 0x0803FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? \
+ ((ADDRESS) <= 0x0801FFFF) : ((ADDRESS) <= 0x0800FFFF))))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40) ? \
+ ((ADDRESS) <= 0x0800FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? \
+ ((ADDRESS) <= 0x08007FFF) : ((ADDRESS) <= 0x08003FFF))))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Nb_Pages
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF) : \
+ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF)))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF) : \
+ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFF)))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_Write_Protection
+ * @{
+ */
+#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /* Write protection of page 0 to 1 */
+#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /* Write protection of page 2 to 3 */
+#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /* Write protection of page 4 to 5 */
+#define OB_WRP_PAGES6TO7 ((uint32_t)0x00000008) /* Write protection of page 6 to 7 */
+#define OB_WRP_PAGES8TO9 ((uint32_t)0x00000010) /* Write protection of page 8 to 9 */
+#define OB_WRP_PAGES10TO11 ((uint32_t)0x00000020) /* Write protection of page 10 to 11 */
+#define OB_WRP_PAGES12TO13 ((uint32_t)0x00000040) /* Write protection of page 12 to 13 */
+#define OB_WRP_PAGES14TO15 ((uint32_t)0x00000080) /* Write protection of page 14 to 15 */
+#define OB_WRP_PAGES16TO17 ((uint32_t)0x00000100) /* Write protection of page 16 to 17 */
+#define OB_WRP_PAGES18TO19 ((uint32_t)0x00000200) /* Write protection of page 18 to 19 */
+#define OB_WRP_PAGES20TO21 ((uint32_t)0x00000400) /* Write protection of page 20 to 21 */
+#define OB_WRP_PAGES22TO23 ((uint32_t)0x00000800) /* Write protection of page 22 to 23 */
+#define OB_WRP_PAGES24TO25 ((uint32_t)0x00001000) /* Write protection of page 24 to 25 */
+#define OB_WRP_PAGES26TO27 ((uint32_t)0x00002000) /* Write protection of page 26 to 27 */
+#define OB_WRP_PAGES28TO29 ((uint32_t)0x00004000) /* Write protection of page 28 to 29 */
+#define OB_WRP_PAGES30TO31 ((uint32_t)0x00008000) /* Write protection of page 30 to 31 */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F373xC) || defined(STM32F378xx)
+#define OB_WRP_PAGES32TO33 ((uint32_t)0x00010000) /* Write protection of page 32 to 33 */
+#define OB_WRP_PAGES34TO35 ((uint32_t)0x00020000) /* Write protection of page 34 to 35 */
+#define OB_WRP_PAGES36TO37 ((uint32_t)0x00040000) /* Write protection of page 36 to 37 */
+#define OB_WRP_PAGES38TO39 ((uint32_t)0x00080000) /* Write protection of page 38 to 39 */
+#define OB_WRP_PAGES40TO41 ((uint32_t)0x00100000) /* Write protection of page 40 to 41 */
+#define OB_WRP_PAGES42TO43 ((uint32_t)0x00200000) /* Write protection of page 42 to 43 */
+#define OB_WRP_PAGES44TO45 ((uint32_t)0x00400000) /* Write protection of page 44 to 45 */
+#define OB_WRP_PAGES46TO47 ((uint32_t)0x00800000) /* Write protection of page 46 to 47 */
+#define OB_WRP_PAGES48TO49 ((uint32_t)0x01000000) /* Write protection of page 48 to 49 */
+#define OB_WRP_PAGES50TO51 ((uint32_t)0x02000000) /* Write protection of page 50 to 51 */
+#define OB_WRP_PAGES52TO53 ((uint32_t)0x04000000) /* Write protection of page 52 to 53 */
+#define OB_WRP_PAGES54TO55 ((uint32_t)0x08000000) /* Write protection of page 54 to 55 */
+#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */
+#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */
+#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */
+#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /* Write protection of page 62 to 127 */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || STM32F373xC || STM32F378xx */
+
+#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
+#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F373xC) || defined(STM32F378xx)
+#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
+#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F373xC) || defined(STM32F378xx)
+#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
+#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F373xC) || defined(STM32F378xx)
+#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all pages */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define OB_WRP_ALLPAGES ((uint32_t)0x0000FFFF) /*!< Write protection of all pages */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000))
+/**
+ * @}
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup FLASHEx_OB_SDADC12_VDD_MONITOR
+ * @{
+ */
+#define OB_SDACD_VDD_MONITOR_RESET ((uint8_t)0x00) /*!< SDADC VDD Monitor reset */
+#define OB_SDACD_VDD_MONITOR_SET ((uint8_t)0x80) /*!< SDADC VDD Monitor set */
+
+#define IS_OB_SDACD_VDD_MONITOR(VDD_MONITOR) (((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_SET) || \
+ ((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_RESET))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_gpio.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,272 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_GPIO_H
+#define __STM32F3xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
+ This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define GPIO_pins_define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK) != (uint32_t)0x00)
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define GPIO_mode_define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed_define GPIO_speed_define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */
+#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
+#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_HIGH))
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define GPIO_pull_define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/* Include GPIO HAL Extension module */
+#include "stm32f3xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_GPIO_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_gpio_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,973 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_GPIO_EX_H
+#define __STM32F3xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIOEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIOEx_Exported_Constants GPIOEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIOEx_Alternate_function_selection GPIOEx_Alternate_function_selection
+ * @{
+ */
+
+#if defined (STM32F302xC) || defined (STM32F303xC)
+/*------------------------- STM32F302xC/STM32F303xC---------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xA) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xC) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+
+#define GPIO_AF14_USB ((uint8_t)0x0E) /* USB Alternate Function mapping */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0E) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302xC || STM32F303xC */
+
+#if defined (STM32F358xx)
+/*---------------------------------- STM32F358xx -------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xA) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xC) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F358xx */
+
+#if defined (STM32F373xC)
+/*---------------------------------- STM32F373xC--------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM13 ((uint8_t)0x02) /* TIM13 Alternate Function mapping */
+#define GPIO_AF2_TIM14 ((uint8_t)0x02) /* TIM14 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM19 ((uint8_t)0x02) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_CEC ((uint8_t)0x06) /* CEC Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+#define GPIO_AF7_CEC ((uint8_t)0x07) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM12 ((uint8_t)0xA) /* TIM12 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM19 ((uint8_t)0x0B) /* TIM19 Alternate Function mapping */
+
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0E) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0B) || ((AF) == (uint8_t)0x0E) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F373xC */
+
+
+#if defined (STM32F378xx)
+/*---------------------------------------- STM32F378xx--------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM13 ((uint8_t)0x02) /* TIM13 Alternate Function mapping */
+#define GPIO_AF2_TIM14 ((uint8_t)0x02) /* TIM14 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM19 ((uint8_t)0x02) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_CEC ((uint8_t)0x06) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+#define GPIO_AF7_CEC ((uint8_t)0x07) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM12 ((uint8_t)0xA) /* TIM12 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM19 ((uint8_t)0x0B) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0B) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F378xx */
+
+#if defined (STM32F303x8)
+/*---------------------------------- STM32F303x8--------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /* TIM16 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_OPAMP2 ((uint8_t)0x0D) /* OPAMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0D) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303x8 */
+
+#if defined (STM32F334x8) || defined (STM32F328xx)
+/*---------------------------------- STM32F334x8/STM32F328xx -------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /* TIM16 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_HRTIM1 ((uint8_t)0x03) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_HRTIM1 ((uint8_t)0x0C) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_OPAMP2 ((uint8_t)0x0D) /* OPAMP2 Alternate Function mapping */
+#define GPIO_AF13_HRTIM1 ((uint8_t)0x0D) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0D) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F334x8 || STM32F328xx */
+
+#if defined (STM32F301x8) || defined (STM32F318xx)
+/*---------------------------------- STM32F301x8 / STM32F318xx ------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08) /* I2C3 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined (STM32F302x8)
+/*---------------------------------- STM32F302x8------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07) /* GPCOMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08) /* I2C3 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302x8 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_hrtim.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,3490 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_hrtim.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of HRTIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_HRTIM_H
+#define __STM32F3xx_HAL_HRTIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F334x8)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HRTIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+#define MAX_HRTIM_TIMER 6
+
+/**
+ * @brief HRTIM Configuration Structure definition - Time base related parameters
+ */
+typedef struct
+{
+ uint32_t HRTIMInterruptResquests; /*!< Specifies which interrupts requests must enabled for the HRTIM instance
+ This parameter can be any combination of @ref HRTIM_Common_Interrupt_Enable */
+ uint32_t SyncOptions; /*!< Specifies how the HRTIM instance handles the external synchronization signals
+ This parameter can be a combination of @ref HRTIM_Synchronization_Options */
+ uint32_t SyncInputSource; /*!< Specifies the external synchronization input source
+ This parameter can be a value of @ref HRTIM_Synchronization_Input_Source */
+ uint32_t SyncOutputSource; /*!< Specifies the source and event to be sent on the external synchronization outputs
+ This parameter can be a value of @ref HRTIM_Synchronization_Output_Source */
+ uint32_t SyncOutputPolarity; /*!< Specifies the conditionning of the event to be sent on the external synchronization outputs
+ This parameter can be a value of @ref HRTIM_Synchronization_Output_Polarity */
+} HRTIM_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_HRTIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_HRTIM_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_HRTIM_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_HRTIM_STATE_ERROR = 0x07, /*!< Error state */
+} HAL_HRTIM_StateTypeDef;
+
+/**
+ * @brief HRTIM Timer Structure definition
+ */
+typedef struct
+{
+ uint32_t CaptureTrigger1; /*!< Event(s) triggering capture unit 1 */
+ uint32_t CaptureTrigger2; /*!< Event(s) triggering capture unit 2 */
+ uint32_t InterruptRequests; /*!< Interrupts requests enabled for the timer */
+ uint32_t DMARequests; /*!< DMA requests enabled for the timer */
+ uint32_t DMASrcAddress; /*!< Address of the source address of the DMA transfer */
+ uint32_t DMADstAddress; /*!< Address of the destination address of the DMA transfer */
+ uint32_t DMASize; /*!< Ssize of the DMA transfer */
+} HRTIM_TimerParamTypeDef;
+
+/**
+ * @brief HRTIM Handle Structure definition
+ */
+typedef struct __HRTIM_HandleTypeDef
+{
+ HRTIM_TypeDef * Instance; /*!< Register base address */
+
+ HRTIM_InitTypeDef Init; /*!< HRTIM required parameters */
+
+ HRTIM_TimerParamTypeDef TimerParam[MAX_HRTIM_TIMER]; /*!< HRTIM timers - including the master - parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_HRTIM_StateTypeDef State; /*!< HRTIM communication state */
+
+ DMA_HandleTypeDef * hdmaMaster; /*!< Master timer DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerA; /*!< Timer A DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerB; /*!< Timer B DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerC; /*!< Timer C DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerD; /*!< Timer D DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerE; /*!< Timer E DMA handle parameters */
+} HRTIM_HandleTypeDef;
+
+/**
+ * @brief Simple output compare mode configuration definition
+ */
+typedef struct {
+ uint32_t Period; /*!< Specifies the timer period
+ The period value must be above 3 periods of the fHRTIM clock.
+ Maximum value is = 0xFFDF */
+ uint32_t RepetitionCounter; /*!< Specifies the timer repetition period
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+ uint32_t PrescalerRatio; /*!< Specifies the timer clock prescaler ratio.
+ This parameter can be any value of @ref HRTIM_Prescaler_Ratio */
+ uint32_t Mode; /*!< Specifies the counter operating mode
+ This parameter can be any value of @ref HRTIM_Mode */
+} HRTIM_TimeBaseCfgTypeDef;
+
+/**
+ * @brief Simple output compare mode configuration definition
+ */
+typedef struct {
+ uint32_t Mode; /*!< Specifies the output compare mode (toggle, active, inactive)
+ This parameter can be any value of of @ref HRTIM_Simple_OC_Mode */
+ uint32_t Pulse; /*!< Specifies the compare value to be loaded into the Compare Register.
+ The compare value must be above or equal to 3 periods of the fHRTIM clock */
+ uint32_t Polarity; /*!< Specifies the output polarity
+ This parameter can be any value of @ref HRTIM_Output_Polarity */
+ uint32_t IdleLevel; /*!< Specifies whether the output level is active or inactive when in IDLE state
+ This parameter can be any value of @ref HRTIM_Output_IDLE_Level */
+} HRTIM_SimpleOCChannelCfgTypeDef;
+
+/**
+ * @brief Simple PWM output mode configuration definition
+ */
+typedef struct {
+ uint32_t Pulse; /*!< Specifies the compare value to be loaded into the Compare Register.
+ The compare value must be above or equal to 3 periods of the fHRTIM clock */
+ uint32_t Polarity; /*!< Specifies the output polarity
+ This parameter can be any value of @ref HRTIM_Output_Polarity */
+ uint32_t IdleLevel; /*!< Specifies whether the output level is active or inactive when in IDLE state
+ This parameter can be any value of @ref HRTIM_Output_IDLE_Level */
+} HRTIM_SimplePWMChannelCfgTypeDef;
+
+/**
+ * @brief Simple capture mode configuration definition
+ */
+typedef struct {
+ uint32_t Event; /*!< Specifies the external event triggering the capture
+ This parameter can be any 'EEVx' value of @ref HRTIM_External_Event_Channels */
+ uint32_t EventPolarity; /*!< Specifies the polarity of the external event (in case of level sensitivity)
+ This parameter can be a value of @ref HRTIM_External_Event_Polarity */
+ uint32_t EventSensitivity; /*!< Specifies the sensitivity of the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Sensitivity */
+ uint32_t EventFilter; /*!< Defines the frequency used to sample the External Event and the length of the digital filter
+ This parameter can be a value of @ref HRTIM_External_Event_Filter */
+} HRTIM_SimpleCaptureChannelCfgTypeDef;
+
+/**
+ * @brief Simple One Pulse mode configuration definition
+ */
+typedef struct {
+ uint32_t Pulse; /*!< Specifies the compare value to be loaded into the Compare Register.
+ The compare value must be above or equal to 3 periods of the fHRTIM clock */
+ uint32_t OutputPolarity; /*!< Specifies the output polarity
+ This parameter can be any value of @ref HRTIM_Output_Polarity */
+ uint32_t OutputIdleLevel; /*!< Specifies whether the output level is active or inactive when in IDLE state
+ This parameter can be any value of @ref HRTIM_Output_IDLE_Level */
+ uint32_t Event; /*!< Specifies the external event triggering the pulse generation
+ This parameter can be any 'EEVx' value of @ref HRTIM_External_Event_Channels */
+ uint32_t EventPolarity; /*!< Specifies the polarity of the external event (in case of level sensitivity)
+ This parameter can be a value of @ref HRTIM_External_Event_Polarity */
+ uint32_t EventSensitivity; /*!< Specifies the sensitivity of the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Sensitivity */
+ uint32_t EventFilter; /*!< Defines the frequency used to sample the External Event and the length of the digital filter
+ This parameter can be a value of @ref HRTIM_External_Event_Filter */
+} HRTIM_SimpleOnePulseChannelCfgTypeDef;
+
+/**
+ * @brief Timer configuration definition
+ */
+typedef struct {
+ uint32_t InterruptRequests; /*!< Relevant for all HRTIM timers, including the master
+ Specifies which interrupts requests must enabled for the timer
+ This parameter can be any combination of @ref HRTIM_Master_Interrupt_Enable
+ or HRTIM_Timing_Unit_Interrupt_Enable */
+ uint32_t DMARequests; /*!< Relevant for all HRTIM timers, including the master
+ Specifies which DMA requests must be enabled for the timer
+ This parameter can be any combination of @ref HRTIM_Master_DMA_Request_Enable
+ or HRTIM_Timing_Unit_DMA_Request_Enable */
+ uint32_t DMASrcAddress; /*!< Relevant for all HRTIM timers, including the master
+ Specifies the address of the source address of the DMA transfer */
+ uint32_t DMADstAddress; /*!< Relevant for all HRTIM timers, including the master
+ Specifies the address of the destination address of the DMA transfer */
+ uint32_t DMASize; /*!< Relevant for all HRTIM timers, including the master
+ Specifies the size of the DMA transfer */
+ uint32_t HalfModeEnable; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not hald mode is enabled
+ This parameter can be any value of @ref HRTIM_Half_Mode_Enable */
+ uint32_t StartOnSync; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not timer is reset by a rising edge on the synchronization input (when enabled)
+ This parameter can be any value of @ref HRTIM_Start_On_Sync_Input_Event */
+ uint32_t ResetOnSync; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not timer is reset by a rising edge on the synchronization input (when enabled)
+ This parameter can be any value of @ref HRTIM_Reset_On_Sync_Input_Event */
+ uint32_t DACSynchro; /*!< Relevant for all HRTIM timers, including the master
+ Indicates whether or not the a DAC synchronization event is generated
+ This parameter can be any value of @ref HRTIM_DAC_Synchronization */
+ uint32_t PreloadEnable; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not register preload is enabled
+ This parameter can be any value of @ref HRTIM_Register_Preload_Enable */
+ uint32_t UpdateGating; /*!< Relevant for all HRTIM timers, including the master
+ Specifies how the update occurs with respect to a burst DMA transaction or
+ update enable inputs (Slave timers only)
+ This parameter can be any value of @ref HRTIM_Update_Gating */
+ uint32_t BurstMode; /*!< Relevant for all HRTIM timers, including the master
+ Specifies how the timer behaves during a burst mode operation
+ This parameter can be any value of @ref HRTIM_Timer_Burst_Mode */
+ uint32_t RepetitionUpdate; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not registers update is triggered by the repetition event
+ This parameter can be any valuen of @ref HRTIM_Timer_Repetition_Update */
+ uint32_t PushPull; /*!< Relevant for Timer A to Timer E
+ Specifies whether or not the push-pull mode is enabled
+ This parameter can be any value of @ref HRTIM_Timer_Push_Pull_Mode */
+ uint32_t FaultEnable; /*!< Relevant for Timer A to Timer E
+ Specifies which fault channels are enabled for the timer
+ This parameter can be a combination of @ref HRTIM_Timer_Fault_Enabling */
+ uint32_t FaultLock; /*!< Relevant for Timer A to Timer E
+ Specifies whether or not fault enabling status is write protected
+ This parameter can be a value of @ref HRTIM_Timer_Fault_Lock */
+ uint32_t DeadTimeInsertion; /*!< Relevant for Timer A to Timer E
+ Specifies whether or not deadtime insertion is enabled for the timer
+ This parameter can be a value of @ref HRTIM_Timer_Deadtime_Insertion */
+ uint32_t DelayedProtectionMode; /*!< Relevant for Timer A to Timer E
+ Specifies the delayed protection mode
+ This parameter can be a value of @ref HRTIM_Timer_Delayed_Protection_Mode */
+ uint32_t UpdateTrigger; /*!< Relevant for Timer A to Timer E
+ Specifies source(s) triggering the timer registers update
+ This parameter can be a combination of @ref HRTIM_Timer_Update_Trigger */
+ uint32_t ResetTrigger; /*!< Relevant for Timer A to Timer E
+ Specifies source(s) triggering the timer counter reset
+ This parameter can be a combination of @ref HRTIM_Timer_Reset_Trigger */
+ uint32_t ResetUpdate; /*!< Relevant for Timer A to Timer E
+ Specifies whether or not registers update is triggered when the timer counter is reset
+ This parameter can be a value of @ref HRTIM_Timer_Reset_Update */
+} HRTIM_TimerCfgTypeDef;
+
+/**
+ * @brief Compare unit configuration definition
+ */
+typedef struct {
+ uint32_t CompareValue; /*!< Specifies the compare value of the timer compare unit
+ the minimum value must be greater than or equal to 3 periods of the fHRTIM clock
+ the maximum value must be less than or equal to 0xFFFF - 1 periods of the fHRTIM clock */
+ uint32_t AutoDelayedMode; /*!< Specifies the auto delayed mode for compare unit 2 or 4
+ This parameter can be a value of @ref HRTIM_Compare_Unit_Auto_Delayed_Mode */
+ uint32_t AutoDelayedTimeout; /*!< Specifies compare value for timing unit 1 or 3 when auto delayed mode with time out is selected
+ CompareValue + AutoDelayedTimeout must be less than 0xFFFF */
+} HRTIM_CompareCfgTypeDef;
+
+/**
+ * @brief Capture unit configuration definition
+ */
+typedef struct {
+ uint32_t Trigger; /*!< Specifies source(s) triggering the capture
+ This parameter can be a combination of @ref HRTIM_Capture_Unit_Trigger */
+} HRTIM_CaptureCfgTypeDef;
+
+/**
+ * @brief Output configuration definition
+ */
+typedef struct {
+ uint32_t Polarity; /*!< Specifies the output polarity
+ This parameter can be any value of @ref HRTIM_Output_Polarity */
+ uint32_t SetSource; /*!< Specifies the event(s) transitioning the output from its inactive level to its active level
+ This parameter can be a combination of @ref HRTIM_Output_Set_Source */
+ uint32_t ResetSource; /*!< Specifies the event(s) transitioning the output from its active level to its inactive level
+ This parameter can be a combination of @ref HRTIM_Output_Reset_Source */
+ uint32_t IdleMode; /*!< Specifies whether or not the output is affected by a burst mode operation
+ This parameter can be any value of @ref HRTIM_Output_Idle_Mode */
+ uint32_t IdleLevel; /*!< Specifies whether the output level is active or inactive when in IDLE state
+ This parameter can be any value of @ref HRTIM_Output_IDLE_Level */
+ uint32_t FaultLevel; /*!< Specifies whether the output level is active or inactive when in FAULT state
+ This parameter can be any value of @ref HRTIM_Output_FAULT_Level */
+ uint32_t ChopperModeEnable; /*!< Indicates whether or not the chopper mode is enabled
+ This parameter can be any value of @ref HRTIM_Output_Chopper_Mode_Enable */
+ uint32_t BurstModeEntryDelayed; /* !<Indicates whether or not deadtime is inserted when entering the IDLE state
+ during a burst mode operation
+ This parameters can be any value of @ref HRTIM_Output_Burst_Mode_Entry_Delayed */
+} HRTIM_OutputCfgTypeDef;
+
+/**
+ * @brief External event filtering in timing units configuration definition
+ */
+typedef struct {
+ uint32_t Filter; /*!< Specifies the type of event filtering within the timing unit
+ This parameter can be a value of @ref HRTIM_Timer_External_Event_Filter */
+ uint32_t Latch; /*!< Specifies whether or not the signal is latched
+ This parameter can be a value of @ref HRTIM_Timer_External_Event_Latch */
+} HRTIM_TimerEventFilteringCfgTypeDef;
+
+/**
+ * @brief Dead time feature configuration definition
+ */
+typedef struct {
+ uint32_t Prescaler; /*!< Specifies the Deadtime Prescaler
+ This parameter can be a value of @ref HRTIM_Deadtime_Prescaler_Ratio */
+ uint32_t RisingValue; /*!< Specifies the Deadtime following a rising edge
+ This parameter can be a number between 0x0 and 0x1FF */
+ uint32_t RisingSign; /*!< Specifies whether the deadtime is positive or negative on rising edge
+ This parameter can be a value of @ref HRTIM_Deadtime_Rising_Sign */
+ uint32_t RisingLock; /*!< Specifies whether or not deadtime rising settings (value and sign) are write protected
+ This parameter can be a value of @ref HRTIM_Deadtime_Rising_Lock */
+ uint32_t RisingSignLock; /*!< Specifies whether or not deadtime rising sign is write protected
+ This parameter can be a value of @ref HRTIM_Deadtime_Rising_Sign_Lock */
+ uint32_t FallingValue; /*!< Specifies the Deadtime following a falling edge
+ This parameter can be a number between 0x0 and 0x1FF */
+ uint32_t FallingSign; /*!< Specifies whether the deadtime is positive or negative on falling edge
+ This parameter can be a value of @ref HRTIM_Deadtime_Falling_Sign */
+ uint32_t FallingLock; /*!< Specifies whether or not deadtime falling settings (value and sign) are write protected
+ This parameter can be a value of @ref HRTIM_Deadtime_Falling_Lock */
+ uint32_t FallingSignLock; /*!< Specifies whether or not deadtime falling sign is write protected
+ This parameter can be a value of @ref HRTIM_Deadtime_Falling_Sign_Lock */
+} HRTIM_DeadTimeCfgTypeDef ;
+
+/**
+ * @brief Chopper mode configuration definition
+ */
+typedef struct {
+ uint32_t CarrierFreq; /*!< Specifies the Timer carrier frequency value.
+ This parameter can be a value of @ref HRTIM_Chopper_Frequency */
+ uint32_t DutyCycle; /*!< Specifies the Timer chopper duty cycle value.
+ This parameter can be a value of @ref HRTIM_Chopper_Duty_Cycle */
+ uint32_t StartPulse; /*!< Specifies the Timer pulse width value.
+ This parameter can be a value of @ref HRTIM_Chopper_Start_Pulse_Width */
+} HRTIM_ChopperModeCfgTypeDef;
+
+/**
+ * @brief External event channel configuration definition
+ */
+typedef struct {
+ uint32_t Source; /*!< Identifies the source of the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Sources */
+ uint32_t Polarity; /*!< Specifies the polarity of the external event (in case of level sensitivity)
+ This parameter can be a value of @ref HRTIM_External_Event_Polarity */
+ uint32_t Sensitivity; /*!< Specifies the sensitivity of the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Sensitivity */
+ uint32_t Filter; /*!< Defines the frequency used to sample the External Event and the length of the digital filter
+ This parameter can be a value of @ref HRTIM_External_Event_Filter */
+ uint32_t FastMode; /*!< Indicates whether or not low latency mode is enabled for the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Fast_Mode */
+} HRTIM_EventCfgTypeDef;
+
+/**
+ * @brief Fault channel configuration definition
+ */
+typedef struct {
+ uint32_t Source; /*!< Identifies the source of the fault
+ This parameter can be a value of @ref HRTIM_Fault_Sources */
+ uint32_t Polarity; /*!< Specifies the polarity of the fault event
+ This parameter can be a value of @ref HRTIM_Fault_Polarity */
+ uint32_t Filter; /*!< Defines the frequency used to sample the Fault input and the length of the digital filter
+ This parameter can be a value of @ref HRTIM_Fault_Filter */
+ uint32_t Lock; /*!< Indicates whether or not fault programming bits are write protected
+ This parameter can be a value of @ref HRTIM_Fault_Lock */
+} HRTIM_FaultCfgTypeDef;
+
+/**
+ * @brief Burst mode configuration definition
+ */
+typedef struct {
+ uint32_t Mode; /*!< Specifies the burst mode operating mode
+ This parameter can be a value of @ref HRTIM_Burst_Mode_Operating_mode */
+ uint32_t ClockSource; /*!< Specifies the burst mode clock source
+ This parameter can be a value of @ref HRTIM_Burst_Mode_Clock_Source */
+ uint32_t Prescaler; /*!< Specifies the burst mode prescaler
+ This parameter can be a value of @ref HRTIM_Burst_Mode_Prescaler */
+ uint32_t PreloadEnable; /*!< Specifies whether or not preload is enabled for burst mode related registers (HRTIM_BMCMPR and HRTIM_BMPER)
+ This parameter can be a combination of @ref HRTIM_Burst_Mode_Register_Preload_Enable */
+ uint32_t Trigger; /*!< Specifies the event(s) trigering the burst operation
+ This parameter can be a combination of @ref HRTIM_Burst_Mode_Trigger */
+ uint32_t IdleDuration; /*!< Specifies number of periods during which the selected timers are in idle state
+ This parameter can be a number between 0x0 and 0xFFFF */
+ uint32_t Period; /*!< Specifies burst mode repetition period
+ This parameter can be a number between 0x1 and 0xFFFF */
+} HRTIM_BurstModeCfgTypeDef;
+
+/**
+ * @brief ADC trigger configuration definition
+ */
+typedef struct {
+ uint32_t UpdateSource; /*!< Specifies the ADC trigger update source
+ This parameter can be a combination of @ref HRTIM_ADC_Trigger_Update_Source */
+ uint32_t Trigger; /*!< Specifies the event(s) triggering the ADC conversion
+ This parameter can be a value of @ref HRTIM_ADC_Trigger_Event */
+} HRTIM_ADCTriggerCfgTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HRTIM_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HRTIM_Timer_Index
+ * @{
+ * @brief Constants defining the timer indexes
+ */
+#define HRTIM_TIMERINDEX_TIMER_A (uint32_t)0x0 /*!< Index used to access timer A registers */
+#define HRTIM_TIMERINDEX_TIMER_B (uint32_t)0x1 /*!< Index used to access timer B registers */
+#define HRTIM_TIMERINDEX_TIMER_C (uint32_t)0x2 /*!< Index used to access timer C registers */
+#define HRTIM_TIMERINDEX_TIMER_D (uint32_t)0x3 /*!< Index used to access timer D registers */
+#define HRTIM_TIMERINDEX_TIMER_E (uint32_t)0x4 /*!< Index used to access timer E registers */
+#define HRTIM_TIMERINDEX_MASTER (uint32_t)0x5 /*!< Index used to access master registers */
+#define HRTIM_TIMERINDEX_COMMON (uint32_t)0xFF /*!< Index used to access HRTIM common registers */
+
+#define IS_HRTIM_TIMERINDEX(TIMERINDEX)\
+ (((TIMERINDEX) == HRTIM_TIMERINDEX_MASTER) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_A) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_B) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_C) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_D) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_E))
+
+#define IS_HRTIM_TIMING_UNIT(TIMERINDEX)\
+ (((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_A) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_B) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_C) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_D) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_E))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_identifier
+ * @{
+ * @brief Constants defining timer identifiers
+ */
+#define HRTIM_TIMERID_MASTER (HRTIM_MCR_MCEN) /*!< Master identifier*/
+#define HRTIM_TIMERID_TIMER_A (HRTIM_MCR_TACEN) /*!< Timer A identifier */
+#define HRTIM_TIMERID_TIMER_B (HRTIM_MCR_TBCEN) /*!< Timer B identifier */
+#define HRTIM_TIMERID_TIMER_C (HRTIM_MCR_TCCEN) /*!< Timer C identifier */
+#define HRTIM_TIMERID_TIMER_D (HRTIM_MCR_TDCEN) /*!< Timer D identifier */
+#define HRTIM_TIMERID_TIMER_E (HRTIM_MCR_TECEN) /*!< Timer E identifier */
+
+#define IS_HRTIM_TIMERID(TIMERID) (((TIMERID) & 0xFFC0FFFF) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Compare_Unit
+ * @{
+ * @brief Constants defining compare unit identifiers
+ */
+#define HRTIM_COMPAREUNIT_1 (uint32_t)0x00000001 /*!< Compare unit 1 identifier */
+#define HRTIM_COMPAREUNIT_2 (uint32_t)0x00000002 /*!< Compare unit 2 identifier */
+#define HRTIM_COMPAREUNIT_3 (uint32_t)0x00000004 /*!< Compare unit 3 identifier */
+#define HRTIM_COMPAREUNIT_4 (uint32_t)0x00000008 /*!< Compare unit 4 identifier */
+
+#define IS_HRTIM_COMPAREUNIT(COMPAREUNIT)\
+ (((COMPAREUNIT) == HRTIM_COMPAREUNIT_1) || \
+ ((COMPAREUNIT) == HRTIM_COMPAREUNIT_2) || \
+ ((COMPAREUNIT) == HRTIM_COMPAREUNIT_3) || \
+ ((COMPAREUNIT) == HRTIM_COMPAREUNIT_4))
+ /**
+ * @}
+ */
+
+/** @defgroup HRTIM_Capture_Unit
+ * @{
+ * @brief Constants defining capture unit identifiers
+ */
+#define HRTIM_CAPTUREUNIT_1 (uint32_t)0x00000001 /*!< Capture unit 1 identifier */
+#define HRTIM_CAPTUREUNIT_2 (uint32_t)0x00000002 /*!< Capture unit 2 identifier */
+
+#define IS_HRTIM_CAPTUREUNIT(CAPTUREUNIT)\
+ (((CAPTUREUNIT) == HRTIM_CAPTUREUNIT_1) || \
+ ((CAPTUREUNIT) == HRTIM_CAPTUREUNIT_2))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Output
+ * @{
+ * @brief Constants defining timer output identifiers
+ */
+#define HRTIM_OUTPUT_TA1 (uint32_t)0x00000001 /*!< Timer A - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TA2 (uint32_t)0x00000002 /*!< Timer A - Ouput 2 identifier */
+#define HRTIM_OUTPUT_TB1 (uint32_t)0x00000004 /*!< Timer B - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TB2 (uint32_t)0x00000008 /*!< Timer B - Ouput 2 identifier */
+#define HRTIM_OUTPUT_TC1 (uint32_t)0x00000010 /*!< Timer C - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TC2 (uint32_t)0x00000020 /*!< Timer C - Ouput 2 identifier */
+#define HRTIM_OUTPUT_TD1 (uint32_t)0x00000040 /*!< Timer D - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TD2 (uint32_t)0x00000080 /*!< Timer D - Ouput 2 identifier */
+#define HRTIM_OUTPUT_TE1 (uint32_t)0x00000100 /*!< Timer E - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TE2 (uint32_t)0x00000200 /*!< Timer E - Ouput 2 identifier */
+
+#define IS_HRTIM_OUTPUT(OUTPUT) (((OUTPUT) & 0xFFFFFC00) == 0x00000000)
+
+#define IS_HRTIM_TIMER_OUTPUT(TIMER, OUTPUT)\
+ ((((TIMER) == HRTIM_TIMERINDEX_TIMER_A) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TA1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TA2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_B) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TB1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TB2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_C) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TC1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TC2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_D) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TD1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TD2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_E) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TE1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TE2))))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_ADC_Trigger
+ * @{
+ * @brief Constants defining ADC triggers identifiers
+ */
+#define HRTIM_ADCTRIGGER_1 (uint32_t)0x00000001 /*!< ADC trigger 1 identifier */
+#define HRTIM_ADCTRIGGER_2 (uint32_t)0x00000002 /*!< ADC trigger 2 identifier */
+#define HRTIM_ADCTRIGGER_3 (uint32_t)0x00000004 /*!< ADC trigger 3 identifier */
+#define HRTIM_ADCTRIGGER_4 (uint32_t)0x00000008 /*!< ADC trigger 4 identifier */
+
+#define IS_HRTIM_ADCTRIGGER(ADCTRIGGER)\
+ (((ADCTRIGGER) == HRTIM_ADCTRIGGER_1) || \
+ ((ADCTRIGGER) == HRTIM_ADCTRIGGER_2) || \
+ ((ADCTRIGGER) == HRTIM_ADCTRIGGER_3) || \
+ ((ADCTRIGGER) == HRTIM_ADCTRIGGER_4))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Channels
+ * @{
+ * @brief Constants defining external event channel identifiers
+ */
+#define HRTIM_EVENT_NONE ((uint32_t)0x00000000) /*!< Undefined event channel */
+#define HRTIM_EVENT_1 ((uint32_t)0x00000001) /*!< External event channel 1 identifier */
+#define HRTIM_EVENT_2 ((uint32_t)0x00000002) /*!< External event channel 2 identifier */
+#define HRTIM_EVENT_3 ((uint32_t)0x00000004) /*!< External event channel 3 identifier */
+#define HRTIM_EVENT_4 ((uint32_t)0x00000008) /*!< External event channel 4 identifier */
+#define HRTIM_EVENT_5 ((uint32_t)0x00000010) /*!< External event channel 5 identifier */
+#define HRTIM_EVENT_6 ((uint32_t)0x00000020) /*!< External event channel 6 identifier */
+#define HRTIM_EVENT_7 ((uint32_t)0x00000040) /*!< External event channel 7 identifier */
+#define HRTIM_EVENT_8 ((uint32_t)0x00000080) /*!< External event channel 8 identifier */
+#define HRTIM_EVENT_9 ((uint32_t)0x00000100) /*!< External event channel 9 identifier */
+#define HRTIM_EVENT_10 ((uint32_t)0x00000200) /*!< External event channel 10 identifier */
+
+#define IS_HRTIM_EVENT(EVENT)\
+ (((EVENT) == HRTIM_EVENT_1) || \
+ ((EVENT) == HRTIM_EVENT_2) || \
+ ((EVENT) == HRTIM_EVENT_3) || \
+ ((EVENT) == HRTIM_EVENT_4) || \
+ ((EVENT) == HRTIM_EVENT_5) || \
+ ((EVENT) == HRTIM_EVENT_6) || \
+ ((EVENT) == HRTIM_EVENT_7) || \
+ ((EVENT) == HRTIM_EVENT_8) || \
+ ((EVENT) == HRTIM_EVENT_9) || \
+ ((EVENT) == HRTIM_EVENT_10))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Channel
+ * @{
+ * @brief Constants defining fault channel identifiers
+ */
+#define HRTIM_FAULT_1 ((uint32_t)0x01) /*!< Fault channel 1 identifier */
+#define HRTIM_FAULT_2 ((uint32_t)0x02) /*!< Fault channel 2 identifier */
+#define HRTIM_FAULT_3 ((uint32_t)0x04) /*!< Fault channel 3 identifier */
+#define HRTIM_FAULT_4 ((uint32_t)0x08) /*!< Fault channel 4 identifier */
+#define HRTIM_FAULT_5 ((uint32_t)0x10) /*!< Fault channel 5 identifier */
+
+#define IS_HRTIM_FAULT(FAULT)\
+ (((FAULT) == HRTIM_FAULT_1) || \
+ ((FAULT) == HRTIM_FAULT_2) || \
+ ((FAULT) == HRTIM_FAULT_3) || \
+ ((FAULT) == HRTIM_FAULT_4) || \
+ ((FAULT) == HRTIM_FAULT_5))
+/**
+ * @}
+ */
+
+
+ /** @defgroup HRTIM_Prescaler_Ratio
+ * @{
+ * @brief Constants defining timer high-resolution clock prescaler ratio.
+ */
+#define HRTIM_PRESCALERRATIO_MUL32 ((uint32_t)0x00000000) /*!< fHRCK: 4.608 GHz - Resolution: 217 ps - Min PWM frequency: 70.3 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_MUL16 ((uint32_t)0x00000001) /*!< fHRCK: 2.304 GHz - Resolution: 434 ps - Min PWM frequency: 35.1 KHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_MUL8 ((uint32_t)0x00000002) /*!< fHRCK: 1.152 GHz - Resolution: 868 ps - Min PWM frequency: 17.6 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_MUL4 ((uint32_t)0x00000003) /*!< fHRCK: 576 MHz - Resolution: 1.73 ns - Min PWM frequency: 8.8 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_MUL2 ((uint32_t)0x00000004) /*!< fHRCK: 288 MHz - Resolution: 3.47 ns - Min PWM frequency: 4.4 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_DIV1 ((uint32_t)0x00000005) /*!< fHRCK: 144 MHz - Resolution: 6.95 ns - Min PWM frequency: 2.2 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_DIV2 ((uint32_t)0x00000006) /*!< fHRCK: 72 MHz - Resolution: 13.88 ns- Min PWM frequency: 1.1 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_DIV4 ((uint32_t)0x00000007) /*!< fHRCK: 36 MHz - Resolution: 27.7 ns- Min PWM frequency: 550Hz (fHRTIM=144MHz) */
+
+#define IS_HRTIM_PRESCALERRATIO(PRESCALERRATIO)\
+ (((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL32) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL16) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL8) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL4) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL2) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_DIV1) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_DIV2) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Mode
+ * @{
+ * @brief Constants defining timer counter operating mode.
+ */
+#define HRTIM_MODE_CONTINUOUS ((uint32_t)0x00000008) /*!< The timer operates in continuous (free-running) mode */
+#define HRTIM_MODE_SINGLESHOT ((uint32_t)0x00000000) /*!< The timer operates in non retriggerable single-shot mode */
+#define HRTIM_MODE_SINGLESHOT_RETRIGGERABLE ((uint32_t)0x00000010) /*!< The timer operates in retriggerable single-shot mode */
+
+#define IS_HRTIM_MODE(MODE)\
+ (((MODE) == HRTIM_MODE_CONTINUOUS) || \
+ ((MODE) == HRTIM_MODE_SINGLESHOT) || \
+ ((MODE) == HRTIM_MODE_SINGLESHOT_RETRIGGERABLE))
+
+#define IS_HRTIM_MODE_ONEPULSE(MODE)\
+ (((MODE) == HRTIM_MODE_SINGLESHOT) || \
+ ((MODE) == HRTIM_MODE_SINGLESHOT_RETRIGGERABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Half_Mode_Enable
+ * @{
+ * @brief Constants defining half mode enabling status.
+ */
+#define HRTIM_HALFMODE_DISABLED ((uint32_t)0x00000000) /*!< Half mode is disabled */
+#define HRTIM_HALFMODE_ENABLED ((uint32_t)0x00000020) /*!< Half mode is enabled */
+
+#define IS_HRTIM_HALFMODE(HALFMODE)\
+ (((HALFMODE) == HRTIM_HALFMODE_DISABLED) || \
+ ((HALFMODE) == HRTIM_HALFMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Start_On_Sync_Input_Event
+ * @{
+ * @brief Constants defining the timer behavior following the synchronization event
+ */
+#define HRTIM_SYNCSTART_DISABLED ((uint32_t)0x00000000) /*!< Synchronization input event has effect on the timer */
+#define HRTIM_SYNCSTART_ENABLED (HRTIM_MCR_SYNCSTRTM) /*!< Synchronization input event starts the timer */
+
+#define IS_HRTIM_SYNCSTART(SYNCSTART)\
+ (((SYNCSTART) == HRTIM_SYNCSTART_DISABLED) || \
+ ((SYNCSTART) == HRTIM_SYNCSTART_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Reset_On_Sync_Input_Event
+ * @{
+ * @brief Constants defining the timer behavior following the synchronization event
+ */
+#define HRTIM_SYNCRESET_DISABLED ((uint32_t)0x00000000) /*!< Synchronization input event has effect on the timer */
+#define HRTIM_SYNCRESET_ENABLED (HRTIM_MCR_SYNCRSTM) /*!< Synchronization input event resets the timer */
+
+#define IS_HRTIM_SYNCRESET(SYNCRESET)\
+ (((SYNCRESET) == HRTIM_SYNCRESET_DISABLED) || \
+ ((SYNCRESET) == HRTIM_SYNCRESET_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_DAC_Synchronization
+ * @{
+ * @brief Constants defining on which output the DAC synchronization event is sent
+ */
+#define HRTIM_DACSYNC_NONE (uint32_t)0x00000000 /*!< No DAC synchronization event generated */
+#define HRTIM_DACSYNC_DACTRIGOUT_1 (HRTIM_MCR_DACSYNC_0) /*!< DAC synchronization event generated on DACTrigOut1 output upon timer update */
+#define HRTIM_DACSYNC_DACTRIGOUT_2 (HRTIM_MCR_DACSYNC_1) /*!< DAC synchronization event generated on DACTrigOut2 output upon timer update */
+#define HRTIM_DACSYNC_DACTRIGOUT_3 (HRTIM_MCR_DACSYNC_1 | HRTIM_MCR_DACSYNC_0) /*!< DAC update generated on DACTrigOut3 output upon timer update */
+
+#define IS_HHRTIM_DACSYNC(DACSYNC)\
+ (((DACSYNC) == HRTIM_DACSYNC_NONE) || \
+ ((DACSYNC) == HRTIM_DACSYNC_DACTRIGOUT_1) || \
+ ((DACSYNC) == HRTIM_DACSYNC_DACTRIGOUT_2) || \
+ ((DACSYNC) == HRTIM_DACSYNC_DACTRIGOUT_3))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Register_Preload_Enable
+ * @{
+ * @brief Constants defining whether a write access into a preloadable
+ * register is done into the active or the preload register.
+ */
+#define HRTIM_PRELOAD_DISABLED ((uint32_t)0x00000000) /*!< Preload disabled: the write access is directly done into the active register */
+#define HRTIM_PRELOAD_ENABLED (HRTIM_MCR_PREEN) /*!< Preload enabled: the write access is done into the preload register */
+
+#define IS_HRTIM_PRELOAD(PRELOAD)\
+ (((PRELOAD) == HRTIM_PRELOAD_DISABLED) || \
+ ((PRELOAD) == HRTIM_PRELOAD_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Update_Gating
+ * @{
+ * @brief Constants defining how the update occurs relatively to the burst DMA
+ * transaction and the external update request on update enable inputs 1 to 3.
+ */
+#define HRTIM_UPDATEGATING_INDEPENDENT (uint32_t)0x00000000 /*!< Update done independently from the DMA burst transfer completion */
+#define HRTIM_UPDATEGATING_DMABURST (HRTIM_TIMCR_UPDGAT_0) /*!< Update done when the DMA burst transfer is completed */
+#define HRTIM_UPDATEGATING_DMABURST_UPDATE (HRTIM_TIMCR_UPDGAT_1) /*!< Update done on timer roll-over following a DMA burst transfer completion*/
+#define HRTIM_UPDATEGATING_UPDEN1 (HRTIM_TIMCR_UPDGAT_1 | HRTIM_TIMCR_UPDGAT_0) /*!< Slave timer only - Update done on a rising edge of HRTIM update enable input 1 */
+#define HRTIM_UPDATEGATING_UPDEN2 (HRTIM_TIMCR_UPDGAT_2) /*!< Slave timer only - Update done on a rising edge of HRTIM update enable input 2 */
+#define HRTIM_UPDATEGATING_UPDEN3 (HRTIM_TIMCR_UPDGAT_2 | HRTIM_TIMCR_UPDGAT_0) /*!< Slave timer only - Update done on a rising edge of HRTIM update enable input 3 */
+#define HRTIM_UPDATEGATING_UPDEN1_UPDATE (HRTIM_TIMCR_UPDGAT_2 | HRTIM_TIMCR_UPDGAT_1) /*!< Slave timer only - Update done on the update event following a rising edge of HRTIM update enable input 1 */
+#define HRTIM_UPDATEGATING_UPDEN2_UPDATE (HRTIM_TIMCR_UPDGAT_2 | HRTIM_TIMCR_UPDGAT_1 | HRTIM_TIMCR_UPDGAT_0) /*!< Slave timer only - Update done on the update event following a rising edge of HRTIM update enable input 2 */
+#define HRTIM_UPDATEGATING_UPDEN3_UPDATE (HRTIM_TIMCR_UPDGAT_3) /*!< Slave timer only - Update done on the update event following a rising edge of HRTIM update enable input 3 */
+
+#define IS_HRTIM_UPDATEGATING_MASTER(UPDATEGATING)\
+ (((UPDATEGATING) == HRTIM_UPDATEGATING_INDEPENDENT) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_DMABURST) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_DMABURST_UPDATE))
+
+#define IS_HRTIM_UPDATEGATING_TIM(UPDATEGATING)\
+ (((UPDATEGATING) == HRTIM_UPDATEGATING_INDEPENDENT) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_DMABURST) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_DMABURST_UPDATE) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN1) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN2) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN3) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN1_UPDATE) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN2_UPDATE) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN3_UPDATE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Burst_Mode
+ * @{
+ * @brief Constants defining how the timer behaves during a burst
+ mode operation.
+ */
+#define HRTIM_TIMERBURSTMODE_MAINTAINCLOCK (uint32_t)0x000000 /*!< Timer counter clock is maintained and the timer operates normally */
+#define HRTIM_TIMERBURSTMODE_RESETCOUNTER (HRTIM_BMCR_MTBM) /*!< Timer counter clock is stopped and the counter is reset */
+
+#define IS_HRTIM_TIMERBURSTMODE(TIMERBURSTMODE) \
+ (((TIMERBURSTMODE) == HRTIM_TIMERBURSTMODE_MAINTAINCLOCK) || \
+ ((TIMERBURSTMODE) == HRTIM_TIMERBURSTMODE_RESETCOUNTER))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Repetition_Update
+ * @{
+ * @brief Constants defining whether registers are updated when the timer
+ * repetition period is completed (either due to roll-over or
+ * reset events)
+ */
+#define HRTIM_UPDATEONREPETITION_DISABLED (uint32_t)0x00000000 /*!< Update on repetition disabled */
+#define HRTIM_UPDATEONREPETITION_ENABLED (HRTIM_MCR_MREPU) /*!< Update on repetition enabled */
+
+#define IS_HRTIM_UPDATEONREPETITION(UPDATEONREPETITION) \
+ (((UPDATEONREPETITION) == HRTIM_UPDATEONREPETITION_DISABLED) || \
+ ((UPDATEONREPETITION) == HRTIM_UPDATEONREPETITION_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup HRTIM_Timer_Push_Pull_Mode
+ * @{
+ * @brief Constants defining whether or not the puhs-pull mode is enabled for
+ * a timer.
+ */
+#define HRTIM_TIMPUSHPULLMODE_DISABLED ((uint32_t)0x00000000) /*!< Push-Pull mode disabled */
+#define HRTIM_TIMPUSHPULLMODE_ENABLED ((uint32_t)HRTIM_TIMCR_PSHPLL) /*!< Push-Pull mode enabled */
+
+#define IS_HRTIM_TIMPUSHPULLMODE(TIMPUSHPULLMODE)\
+ (((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_DISABLED) || \
+ ((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Fault_Enabling
+ * @{
+ * @brief Constants defining whether a faut channel is enabled for a timer
+ */
+#define HRTIM_TIMFAULTENABLE_NONE (uint32_t)0x00000000 /*!< No fault enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT1 (HRTIM_FLTR_FLT1EN) /*!< Fault 1 enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT2 (HRTIM_FLTR_FLT2EN) /*!< Fault 2 enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT3 (HRTIM_FLTR_FLT3EN) /*!< Fault 3 enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT4 (HRTIM_FLTR_FLT4EN) /*!< Fault 4 enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT5 (HRTIM_FLTR_FLT5EN) /*!< Fault 5 enabled */
+
+#define IS_HRTIM_TIMFAULTENABLE(TIMFAULTENABLE) (((TIMFAULTENABLE) & 0xFFFFFFE0) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Fault_Lock
+ * @{
+ * @brief Constants defining whether or not fault enabling bits are write
+ * protected for a timer
+ */
+#define HRTIM_TIMFAULTLOCK_READWRITE ((uint32_t)0x00000000) /*!< Timer fault enabling bits are read/write */
+#define HRTIM_TIMFAULTLOCK_READONLY (HRTIM_FLTR_FLTLCK) /*!< Timer fault enabling bits are read only */
+
+#define IS_HRTIM_TIMFAULTLOCK(TIMFAULTLOCK)\
+ (((TIMFAULTLOCK) == HRTIM_TIMFAULTLOCK_READWRITE) || \
+ ((TIMFAULTLOCK) == HRTIM_TIMFAULTLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Deadtime_Insertion
+ * @{
+ * @brief Constants defining whether or not fault the dead time insertion
+ * feature is enabled for a timer
+ */
+#define HRTIM_TIMDEADTIMEINSERTION_DISABLED ((uint32_t)0x00000000) /*!< Output 1 and output 2 signals are independent */
+#define HRTIM_TIMDEADTIMEINSERTION_ENABLED HRTIM_OUTR_DTEN /*!< Deadtime is inserted between output 1 and output 2 */
+
+#define IS_HRTIM_TIMDEADTIMEINSERTION(TIMPUSHPULLMODE, TIMDEADTIMEINSERTION)\
+ ((((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_DISABLED) && \
+ ((((TIMDEADTIMEINSERTION) == HRTIM_TIMDEADTIMEINSERTION_DISABLED) || \
+ ((TIMDEADTIMEINSERTION) == HRTIM_TIMDEADTIMEINSERTION_ENABLED)))) \
+ || \
+ (((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_ENABLED) && \
+ ((TIMDEADTIMEINSERTION) == HRTIM_TIMDEADTIMEINSERTION_DISABLED)))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Delayed_Protection_Mode
+ * @{
+ * @brief Constants defining all possible delayed protection modes
+ * for a timer. Also definethe source and outputs on which the delayed
+ * protection schemes are applied
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED ((uint32_t)0x00000000) /*!< No action */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 (HRTIM_OUTR_DLYPRTEN) /*!< Output 1 delayed Idle on external Event 6 or 8 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 (HRTIM_OUTR_DLYPRT_0 | HRTIM_OUTR_DLYPRTEN) /*!< Output 2 delayed Idle on external Event 6 or 8 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 (HRTIM_OUTR_DLYPRT_1 | HRTIM_OUTR_DLYPRTEN) /*!< Output 1 and output 2 delayed Idle on external Event 6 or 8 */
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 (HRTIM_OUTR_DLYPRT_1 | HRTIM_OUTR_DLYPRT_0 | HRTIM_OUTR_DLYPRTEN) /*!< Balanced Idle on external Event 6 or 8 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 (HRTIM_OUTR_DLYPRT_2 | HRTIM_OUTR_DLYPRTEN) /*!< Output 1 delayed Idle on external Event 7 or 9 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 (HRTIM_OUTR_DLYPRT_2 | HRTIM_OUTR_DLYPRT_0 | HRTIM_OUTR_DLYPRTEN) /*!< Output 2 delayed Idle on external Event 7 or 9 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 (HRTIM_OUTR_DLYPRT_2 | HRTIM_OUTR_DLYPRT_1 | HRTIM_OUTR_DLYPRTEN) /*!< Output 1 and output2 delayed Idle on external Event 7 or 9 */
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 (HRTIM_OUTR_DLYPRT_2 | HRTIM_OUTR_DLYPRT_1 | HRTIM_OUTR_DLYPRT_0 | HRTIM_OUTR_DLYPRTEN) /*!< Balanced Idle on external Event 7 or 9 */
+
+#define IS_HRTIM_TIMDELAYEDPROTECTION(TIMPUSHPULLMODE, TIMDELAYEDPROTECTION)\
+ ((((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DISABLED) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79)) \
+ || \
+ (((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_ENABLED) && \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79)))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Update_Trigger
+ * @{
+ * @brief Constants defining whether the registers update is done synchronously
+ * with any other timer or master update
+ */
+#define HRTIM_TIMUPDATETRIGGER_NONE (uint32_t)0x00000000 /*!< Register update is disabled */
+#define HRTIM_TIMUPDATETRIGGER_MASTER (HRTIM_TIMCR_MSTU) /*!< Register update is triggered by the master timer update */
+#define HRTIM_TIMUPDATETRIGGER_TIMER_A (HRTIM_TIMCR_TAU) /*!< Register update is triggered by the timer A update */
+#define HRTIM_TIMUPDATETRIGGER_TIMER_B (HRTIM_TIMCR_TBU) /*!< Register update is triggered by the timer B update */
+#define HRTIM_TIMUPDATETRIGGER_TIMER_C (HRTIM_TIMCR_TCU) /*!< Register update is triggered by the timer C update*/
+#define HRTIM_TIMUPDATETRIGGER_TIMER_D (HRTIM_TIMCR_TDU) /*!< Register update is triggered by the timer D update */
+#define HRTIM_TIMUPDATETRIGGER_TIMER_E (HRTIM_TIMCR_TEU) /*!< Register update is triggered by the timer E update */
+
+#define IS_HRTIM_TIMUPDATETRIGGER(TIMUPDATETRIGGER) (((TIMUPDATETRIGGER) & 0xFE07FFFF) == 0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Reset_Trigger
+ * @{
+ * @brief Constants defining the events that can be selected to trigger the reset
+ * of the timer counter
+ */
+#define HRTIM_TIMRESETTRIGGER_NONE (uint32_t)0x00000000 /*!< No counter reset trigger */
+#define HRTIM_TIMRESETTRIGGER_UPDATE (HRTIM_RSTR_UPDATE) /*!< The timer counter is reset upon update event */
+#define HRTIM_TIMRESETTRIGGER_CMP2 (HRTIM_RSTR_CMP2) /*!< The timer counter is reset upon Timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_CMP4 (HRTIM_RSTR_CMP4) /*!< The timer counter is reset upon Timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_PER (HRTIM_RSTR_MSTPER) /*!< The timercounter is reset upon master timer period event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_CMP1 (HRTIM_RSTR_MSTCMP1) /*!< The timer counter is reset upon master timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_CMP2 (HRTIM_RSTR_MSTCMP2) /*!< The timer counter is reset upon master timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_CMP3 (HRTIM_RSTR_MSTCMP3) /*!< The timer counter is reset upon master timer Compare 3 event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_CMP4 (HRTIM_RSTR_MSTCMP4) /*!< The timer counter is reset upon master timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_EEV_1 (HRTIM_RSTR_EXTEVNT1) /*!< The timer counter is reset upon external event 1 */
+#define HRTIM_TIMRESETTRIGGER_EEV_2 (HRTIM_RSTR_EXTEVNT2) /*!< The timer counter is reset upon external event 2 */
+#define HRTIM_TIMRESETTRIGGER_EEV_3 (HRTIM_RSTR_EXTEVNT3) /*!< The timer counter is reset upon external event 3 */
+#define HRTIM_TIMRESETTRIGGER_EEV_4 (HRTIM_RSTR_EXTEVNT4) /*!< The timer counter is reset upon external event 4 */
+#define HRTIM_TIMRESETTRIGGER_EEV_5 (HRTIM_RSTR_EXTEVNT5) /*!< The timer counter is reset upon external event 5 */
+#define HRTIM_TIMRESETTRIGGER_EEV_6 (HRTIM_RSTR_EXTEVNT6) /*!< The timer counter is reset upon external event 6 */
+#define HRTIM_TIMRESETTRIGGER_EEV_7 (HRTIM_RSTR_EXTEVNT7) /*!< The timer counter is reset upon external event 7 */
+#define HRTIM_TIMRESETTRIGGER_EEV_8 (HRTIM_RSTR_EXTEVNT8) /*!< The timer counter is reset upon external event 8 */
+#define HRTIM_TIMRESETTRIGGER_EEV_9 (HRTIM_RSTR_EXTEVNT9) /*!< The timer counter is reset upon external event 9 */
+#define HRTIM_TIMRESETTRIGGER_EEV_10 (HRTIM_RSTR_EXTEVNT10) /*!< The timer counter is reset upon external event 10 */
+#define HRTIM_TIMRESETTRIGGER_OTHER1_CMP1 (HRTIM_RSTR_TIMBCMP1) /*!< The timer counter is reset upon other timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER1_CMP2 (HRTIM_RSTR_TIMBCMP2) /*!< The timer counter is reset upon other timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER1_CMP4 (HRTIM_RSTR_TIMBCMP4) /*!< The timer counter is reset upon other timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER2_CMP1 (HRTIM_RSTR_TIMCCMP1) /*!< The timer counter is reset upon other timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER2_CMP2 (HRTIM_RSTR_TIMCCMP2) /*!< The timer counter is reset upon other timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER2_CMP4 (HRTIM_RSTR_TIMCCMP4) /*!< The timer counter is reset upon other timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER3_CMP1 (HRTIM_RSTR_TIMDCMP1) /*!< The timer counter is reset upon other timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER3_CMP2 (HRTIM_RSTR_TIMDCMP2) /*!< The timer counter is reset upon other timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER3_CMP4 (HRTIM_RSTR_TIMDCMP4) /*!< The timer counter is reset upon other timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER4_CMP1 (HRTIM_RSTR_TIMECMP1) /*!< The timer counter is reset upon other timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER4_CMP2 (HRTIM_RSTR_TIMECMP2) /*!< The timer counter is reset upon other timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER4_CMP4 (HRTIM_RSTR_TIMECMP4) /*!< The timer counter is reset upon other timer Compare 4 event */
+
+#define IS_HRTIM_TIMRESETTRIGGER(TIMRESETTRIGGER) (((TIMRESETTRIGGER) & 0x800000001) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Reset_Update
+ * @{
+ * @brief Constants defining whether the register are updated upon Timerx
+ * counter reset or roll-over to 0 after reaching the period value
+ * in continuous mode
+ */
+#define HRTIM_TIMUPDATEONRESET_DISABLED (uint32_t)0x00000000 /*!< Update by timer x reset / roll-over disabled */
+#define HRTIM_TIMUPDATEONRESET_ENABLED (HRTIM_TIMCR_TRSTU) /*!< Update by timer x reset / roll-over enabled */
+
+#define IS_HRTIM_TIMUPDATEONRESET(TIMUPDATEONRESET) \
+ (((TIMUPDATEONRESET) == HRTIM_TIMUPDATEONRESET_DISABLED) || \
+ ((TIMUPDATEONRESET) == HRTIM_TIMUPDATEONRESET_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Compare_Unit_Auto_Delayed_Mode
+ * @{
+ * @brief Constants defining whether the compare register is behaving in
+ * regular mode (compare match issued as soon as counter equal compare),
+ * or in auto-delayed mode
+ */
+#define HRTIM_AUTODELAYEDMODE_REGULAR ((uint32_t)0x00000000) /*!< standard compare mode */
+#define HRTIM_AUTODELAYEDMODE_AUTODELAYED_NOTIMEOUT (HRTIM_TIMCR_DELCMP2_0) /*!< Compare event generated only if a capture has occured */
+#define HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP1 (HRTIM_TIMCR_DELCMP2_1) /*!< Compare event generated if a capture has occured or after a Compare 1 match (timeout if capture event is missing) */
+#define HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP3 (HRTIM_TIMCR_DELCMP2_1 | HRTIM_TIMCR_DELCMP2_0) /*!< Compare event generated if a capture has occured or after a Compare 3 match (timeout if capture event is missing) */
+
+#define IS_HRTIM_AUTODELAYEDMODE(AUTODELAYEDMODE)\
+ (((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_REGULAR) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_NOTIMEOUT) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP1) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP3))
+
+/* Auto delayed mode is only available for compare units 2 and 4 */
+#define IS_HRTIM_COMPAREUNIT_AUTODELAYEDMODE(COMPAREUNIT, AUTODELAYEDMODE) \
+ ((((COMPAREUNIT) == HRTIM_COMPAREUNIT_2) && \
+ (((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_REGULAR) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_NOTIMEOUT) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP1) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP3))) \
+ || \
+ (((COMPAREUNIT) == HRTIM_COMPAREUNIT_4) && \
+ (((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_REGULAR) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_NOTIMEOUT) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP1) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP3))))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Simple_OC_Mode
+ * @{
+ * @brief Constants defining the behavior of the output signal when the timer
+ operates in basic output compare mode
+ */
+#define HRTIM_BASICOCMODE_TOGGLE ((uint32_t)0x00000001) /*!< Ouput toggles when the timer counter reaches the compare value */
+#define HRTIM_BASICOCMODE_INACTIVE ((uint32_t)0x00000002) /*!< Ouput forced to active level when the timer counter reaches the compare value */
+#define HRTIM_BASICOCMODE_ACTIVE ((uint32_t)0x00000003) /*!< Ouput forced to inactive level when the timer counter reaches the compare value */
+
+#define IS_HRTIM_BASICOCMODE(BASICOCMODE)\
+ (((BASICOCMODE) == HRTIM_BASICOCMODE_TOGGLE) || \
+ ((BASICOCMODE) == HRTIM_BASICOCMODE_INACTIVE) || \
+ ((BASICOCMODE) == HRTIM_BASICOCMODE_ACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Polarity
+ * @{
+ * @brief Constants defining the polarity of a timer output
+ */
+#define HRTIM_OUTPUTPOLARITY_HIGH ((uint32_t)0x00000000) /*!< Output is acitve HIGH */
+#define HRTIM_OUTPUTPOLARITY_LOW (HRTIM_OUTR_POL1) /*!< Output is active LOW */
+
+#define IS_HRTIM_OUTPUTPOLARITY(OUTPUTPOLARITY)\
+ (((OUTPUTPOLARITY) == HRTIM_OUTPUTPOLARITY_HIGH) || \
+ ((OUTPUTPOLARITY) == HRTIM_OUTPUTPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Set_Source
+ * @{
+ * @brief Constants defining the events that can be selected to configure the
+ * set crossbar of a timer output
+ */
+#define HRTIM_OUTPUTSET_NONE (uint32_t)0x00000000 /*!< Reset the output set crossbar */
+#define HRTIM_OUTPUTSET_RESYNC (HRTIM_SET1R_RESYNC) /*!< Timer reset event coming solely from software or SYNC input forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMPER (HRTIM_SET1R_PER) /*!< Timer period event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMCMP1 (HRTIM_SET1R_CMP1) /*!< Timer compare 1 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMCMP2 (HRTIM_SET1R_CMP2) /*!< Timer compare 2 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMCMP3 (HRTIM_SET1R_CMP3) /*!< Timer compare 3 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMCMP4 (HRTIM_SET1R_CMP4) /*!< Timer compare 4 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERPER (HRTIM_SET1R_MSTPER) /*!< The master timer period event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERCMP1 (HRTIM_SET1R_MSTCMP1) /*!< Master Timer compare 1 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERCMP2 (HRTIM_SET1R_MSTCMP2) /*!< Master Timer compare 2 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERCMP3 (HRTIM_SET1R_MSTCMP3) /*!< Master Timer compare 3 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERCMP4 (HRTIM_SET1R_MSTCMP4) /*!< Master Timer compare 4 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) /*!< Timer event 1 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) /*!< Timer event 2 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) /*!< Timer event 3 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) /*!< Timer event 4 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) /*!< Timer event 5 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) /*!< Timer event 6 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) /*!< Timer event 7 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) /*!< Timer event 8 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) /*!< Timer event 9 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_1 (HRTIM_SET1R_EXTVNT1) /*!< External event 1 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_2 (HRTIM_SET1R_EXTVNT2) /*!< External event 2 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_3 (HRTIM_SET1R_EXTVNT3) /*!< External event 3 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_4 (HRTIM_SET1R_EXTVNT4) /*!< External event 4 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_5 (HRTIM_SET1R_EXTVNT5) /*!< External event 5 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_6 (HRTIM_SET1R_EXTVNT6) /*!< External event 6 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_7 (HRTIM_SET1R_EXTVNT7) /*!< External event 7 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_8 (HRTIM_SET1R_EXTVNT8) /*!< External event 8 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_9 (HRTIM_SET1R_EXTVNT9) /*!< External event 9 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_10 (HRTIM_SET1R_EXTVNT10) /*!< External event 10 forces the output to its active state */
+#define HRTIM_OUTPUTSET_UPDATE (HRTIM_SET1R_UPDATE) /*!< Timer register update event forces the output to its active state */
+
+#define IS_HRTIM_OUTPUTSET(OUTPUTSET)\
+ (((OUTPUTSET) == HRTIM_OUTPUTSET_NONE) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_RESYNC) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMPER) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMCMP1) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMCMP2) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMCMP3) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMCMP4) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERPER) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERCMP1) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERCMP2) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERCMP3) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERCMP4) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_1) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_2) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_3) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_4) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_5) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_6) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_7) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_8) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_9) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_1) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_2) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_3) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_4) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_5) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_6) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_7) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_8) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_9) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_10) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_UPDATE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Reset_Source
+ * @{
+ * @brief Constants defining the events that can be selected to configure the
+ * set crossbar of a timer output
+ */
+#define HRTIM_OUTPUTRESET_NONE (uint32_t)0x00000000 /*!< Reset the output reset crossbar */
+#define HRTIM_OUTPUTRESET_RESYNC (HRTIM_RST1R_RESYNC) /*!< Timer reset event coming solely from software or SYNC input forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMPER (HRTIM_RST1R_PER) /*!< Timer period event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMCMP1 (HRTIM_RST1R_CMP1) /*!< Timer compare 1 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMCMP2 (HRTIM_RST1R_CMP2) /*!< Timer compare 2 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMCMP3 (HRTIM_RST1R_CMP3) /*!< Timer compare 3 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMCMP4 (HRTIM_RST1R_CMP4) /*!< Timer compare 4 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERPER (HRTIM_RST1R_MSTPER) /*!< The master timer period event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERCMP1 (HRTIM_RST1R_MSTCMP1) /*!< Master Timer compare 1 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERCMP2 (HRTIM_RST1R_MSTCMP2) /*!< Master Timer compare 2 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERCMP3 (HRTIM_RST1R_MSTCMP3) /*!< Master Timer compare 3 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERCMP4 (HRTIM_RST1R_MSTCMP4) /*!< Master Timer compare 4 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) /*!< Timer event 1 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) /*!< Timer event 2 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) /*!< Timer event 3 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) /*!< Timer event 4 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) /*!< Timer event 5 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) /*!< Timer event 6 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) /*!< Timer event 7 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) /*!< Timer event 8 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) /*!< Timer event 9 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_1 (HRTIM_RST1R_EXTVNT1) /*!< External event 1 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_2 (HRTIM_RST1R_EXTVNT2) /*!< External event 2 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_3 (HRTIM_RST1R_EXTVNT3) /*!< External event 3 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_4 (HRTIM_RST1R_EXTVNT4) /*!< External event 4 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_5 (HRTIM_RST1R_EXTVNT5) /*!< External event 5 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_6 (HRTIM_RST1R_EXTVNT6) /*!< External event 6 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_7 (HRTIM_RST1R_EXTVNT7) /*!< External event 7 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_8 (HRTIM_RST1R_EXTVNT8) /*!< External event 8 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_9 (HRTIM_RST1R_EXTVNT9) /*!< External event 9 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_10 (HRTIM_RST1R_EXTVNT10) /*!< External event 10 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_UPDATE (HRTIM_RST1R_UPDATE) /*!< Timer register update event forces the output to its inactive state */
+
+#define IS_HRTIM_OUTPUTRESET(OUTPUTRESET)\
+ (((OUTPUTRESET) == HRTIM_OUTPUTRESET_NONE) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_RESYNC) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMPER) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMCMP1) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMCMP2) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMCMP3) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMCMP4) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERPER) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERCMP1) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERCMP2) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERCMP3) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERCMP4) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_1) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_2) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_3) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_4) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_5) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_6) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_7) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_8) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_9) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_1) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_2) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_3) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_4) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_5) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_6) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_7) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_8) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_9) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_10) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_UPDATE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Idle_Mode
+ * @{
+ * @brief Constants defining whether or not the timer output transition to its
+ IDLE state when burst mode is entered
+ */
+#define HRTIM_OUTPUTIDLEMODE_NONE (uint32_t)0x00000000 /*!< The output is not affected by the burst mode operation */
+#define HRTIM_OUTPUTIDLEMODE_IDLE (HRTIM_OUTR_IDLM1) /*!< The output is in idle state when requested by the burst mode controller */
+
+#define IS_HRTIM_OUTPUTIDLEMODE(OUTPUTIDLEMODE)\
+ (((OUTPUTIDLEMODE) == HRTIM_OUTPUTIDLEMODE_NONE) || \
+ ((OUTPUTIDLEMODE) == HRTIM_OUTPUTIDLEMODE_IDLE))
+ /**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_IDLE_Level
+ * @{
+ * @brief Constants defining the output level when output is in IDLE state
+ */
+#define HRTIM_OUTPUTIDLELEVEL_INACTIVE (uint32_t)0x00000000 /*!< Output at inactive level when in IDLE state */
+#define HRTIM_OUTPUTIDLELEVEL_ACTIVE (HRTIM_OUTR_IDLES1) /*!< Output at active level when in IDLE state */
+
+#define IS_HRTIM_OUTPUTIDLELEVEL(OUTPUTIDLELEVEL)\
+ (((OUTPUTIDLELEVEL) == HRTIM_OUTPUTIDLELEVEL_INACTIVE) || \
+ ((OUTPUTIDLELEVEL) == HRTIM_OUTPUTIDLELEVEL_ACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_FAULT_Level
+ * @{
+ * @brief Constants defining the output level when output is in FAULT state
+ */
+#define HRTIM_OUTPUTFAULTLEVEL_NONE (uint32_t)0x00000000 /*!< The output is not affected by the fault input */
+#define HRTIM_OUTPUTFAULTLEVEL_ACTIVE (HRTIM_OUTR_FAULT1_0) /*!< Output at active level when in FAULT state */
+#define HRTIM_OUTPUTFAULTLEVEL_INACTIVE (HRTIM_OUTR_FAULT1_1) /*!< Output at inactive level when in FAULT state */
+#define HRTIM_OUTPUTFAULTLEVEL_HIGHZ (HRTIM_OUTR_FAULT1_1 | HRTIM_OUTR_FAULT1_0) /*!< Output is tri-stated when in FAULT state */
+
+#define IS_HRTIM_OUTPUTFAULTLEVEL(OUTPUTFAULTLEVEL)\
+ (((OUTPUTFAULTLEVEL) == HRTIM_OUTPUTFAULTLEVEL_NONE) || \
+ ((OUTPUTFAULTLEVEL) == HRTIM_OUTPUTFAULTLEVEL_ACTIVE) || \
+ ((OUTPUTFAULTLEVEL) == HRTIM_OUTPUTFAULTLEVEL_INACTIVE) || \
+ ((OUTPUTFAULTLEVEL) == HRTIM_OUTPUTFAULTLEVEL_HIGHZ))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Chopper_Mode_Enable
+ * @{
+ * @brief Constants defining whether or not chopper mode is enabled for a timer
+ output
+ */
+#define HRTIM_OUTPUTCHOPPERMODE_DISABLED (uint32_t)0x00000000 /*!< The output is not affected by the fault input */
+#define HRTIM_OUTPUTCHOPPERMODE_ENABLED (HRTIM_OUTR_CHP1) /*!< Output at active level when in FAULT state */
+
+#define IS_HRTIM_OUTPUTCHOPPERMODE(OUTPUTCHOPPERMODE)\
+ (((OUTPUTCHOPPERMODE) == HRTIM_OUTPUTCHOPPERMODE_DISABLED) || \
+ ((OUTPUTCHOPPERMODE) == HRTIM_OUTPUTCHOPPERMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Burst_Mode_Entry_Delayed
+ * @{
+ * @brief Constants defining the idle mode entry is delayed by forcing a
+ deadtime insertion before switching the outputs to their idle state
+ */
+#define HRTIM_OUTPUTBURSTMODEENTRY_REGULAR (uint32_t)0x00000000 /*!< The programmed Idle state is applied immediately to the Output */
+#define HRTIM_OUTPUTBURSTMODEENTRY_DELAYED (HRTIM_OUTR_DIDL1) /*!< Deadtime is inserted on output before entering the idle mode */
+
+#define IS_HRTIM_OUTPUTBURSTMODEENTRY(OUTPUTBURSTMODEENTRY)\
+ (((OUTPUTBURSTMODEENTRY) == HRTIM_OUTPUTBURSTMODEENTRY_REGULAR) || \
+ ((OUTPUTBURSTMODEENTRY) == HRTIM_OUTPUTBURSTMODEENTRY_DELAYED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Capture_Unit_Trigger
+ * @{
+ * @brief Constants defining the events that can be selected to trigger the
+ * capture of the timing unit counter
+ */
+#define HRTIM_CAPTURETRIGGER_NONE (uint32_t)0x00000000 /*!< Capture trigger is disabled */
+#define HRTIM_CAPTURETRIGGER_UPDATE (HRTIM_CPT1CR_UPDCPT) /*!< The update event triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_1 (HRTIM_CPT1CR_EXEV1CPT) /*!< The External event 1 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_2 (HRTIM_CPT1CR_EXEV2CPT) /*!< The External event 2 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_3 (HRTIM_CPT1CR_EXEV3CPT) /*!< The External event 3 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_4 (HRTIM_CPT1CR_EXEV4CPT) /*!< The External event 4 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_5 (HRTIM_CPT1CR_EXEV5CPT) /*!< The External event 5 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_6 (HRTIM_CPT1CR_EXEV6CPT) /*!< The External event 6 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_7 (HRTIM_CPT1CR_EXEV7CPT) /*!< The External event 7 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_8 (HRTIM_CPT1CR_EXEV8CPT) /*!< The External event 8 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_9 (HRTIM_CPT1CR_EXEV9CPT) /*!< The External event 9 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_10 (HRTIM_CPT1CR_EXEV10CPT) /*!< The External event 10 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_TA1_SET (HRTIM_CPT1CR_TA1SET) /*!< Capture is triggered by TA1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TA1_RESET (HRTIM_CPT1CR_TA1RST) /*!< Capture is triggered by TA1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERA_CMP1 (HRTIM_CPT1CR_TIMACMP1) /*!< Timer A Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERA_CMP2 (HRTIM_CPT1CR_TIMACMP2) /*!< Timer A Compare 2 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TB1_SET (HRTIM_CPT1CR_TB1SET) /*!< Capture is triggered by TB1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TB1_RESET (HRTIM_CPT1CR_TB1RST) /*!< Capture is triggered by TB1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERB_CMP1 (HRTIM_CPT1CR_TIMBCMP1) /*!< Timer B Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERB_CMP2 (HRTIM_CPT1CR_TIMBCMP2) /*!< Timer B Compare 2 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TC1_SET (HRTIM_CPT1CR_TC1SET) /*!< Capture is triggered by TC1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TC1_RESET (HRTIM_CPT1CR_TC1RST) /*!< Capture is triggered by TC1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERC_CMP1 (HRTIM_CPT1CR_TIMCCMP1) /*!< Timer C Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERC_CMP2 (HRTIM_CPT1CR_TIMCCMP2) /*!< Timer C Compare 2 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TD1_SET (HRTIM_CPT1CR_TD1SET) /*!< Capture is triggered by TD1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TD1_RESET (HRTIM_CPT1CR_TD1RST) /*!< Capture is triggered by TD1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERD_CMP1 (HRTIM_CPT1CR_TIMDCMP1) /*!< Timer D Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERD_CMP2 (HRTIM_CPT1CR_TIMDCMP2) /*!< Timer D Compare 2 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TE1_SET (HRTIM_CPT1CR_TE1SET) /*!< Capture is triggered by TE1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TE1_RESET (HRTIM_CPT1CR_TE1RST) /*!< Capture is triggered by TE1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERE_CMP1 (HRTIM_CPT1CR_TIMECMP1) /*!< Timer E Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERE_CMP2 (HRTIM_CPT1CR_TIMECMP2) /*!< Timer E Compare 2 triggers Capture */
+
+#define IS_HRTIM_TIMER_CAPTURETRIGGER(TIMER, CAPTURETRIGGER) \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_NONE) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_UPDATE) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_3) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_4) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_5) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_6) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_7) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_8) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_9) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_10) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_A) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_B) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_C) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_D) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_E) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP2))))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_External_Event_Filter
+ * @{
+ * @brief Constants defining the event filtering apploed to external events
+ * by a timer
+ */
+#define HRTIM_TIMEVENTFILTER_NONE (0x00000000)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from counter reset/roll-over to Compare 1 */
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) /*!< Blanking from counter reset/roll-over to Compare 2 */
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from counter reset/roll-over to Compare 3 */
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) /*!< Blanking from counter reset/roll-over to Compare 4 */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from another timing unit: TIMFLTR1 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) /*!< Blanking from another timing unit: TIMFLTR2 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from another timing unit: TIMFLTR3 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) /*!< Blanking from another timing unit: TIMFLTR4 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from another timing unit: TIMFLTR5 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) /*!< Blanking from another timing unit: TIMFLTR6 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from another timing unit: TIMFLTR7 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) /*!< Blanking from another timing unit: TIMFLTR8 source */
+#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) /*!< Windowing from counter reset/roll-over to Compare 2 */
+#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) /*!< Windowing from counter reset/roll-over to Compare 3 */
+#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) /*!< Windowing from another timing unit: TIMWIN source */
+
+#define IS_HRTIM_TIMEVENTFILTER(TIMEVENTFILTER)\
+ (((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_NONE) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGCMP1) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGCMP2) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGCMP3) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGCMP4) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR1) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR2) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR3) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR4) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR5) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR6) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR7) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR8) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_WINDOWINGCMP2) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_WINDOWINGCMP3) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_WINDOWINGTIM))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_External_Event_Latch
+ * @{
+ * @brief Constants defining whether or not the external event is
+ * memorized (latched) and generated as soon as the blanking period
+ * is completed or the window ends
+ */
+#define HRTIM_TIMEVENTLATCH_DISABLED ((uint32_t)0x00000000) /*!< Event is ignored if it happens during a blank, or passed through during a window */
+#define HRTIM_TIMEVENTLATCH_ENABLED HRTIM_EEFR1_EE1LTCH /*!< Event is latched and delayed till the end of the blanking or windowing period */
+
+#define IS_HRTIM_TIMEVENTLATCH(TIMEVENTLATCH)\
+ (((TIMEVENTLATCH) == HRTIM_TIMEVENTLATCH_DISABLED) || \
+ ((TIMEVENTLATCH) == HRTIM_TIMEVENTLATCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Prescaler_Ratio
+ * @{
+ * @brief Constants defining division ratio between the timer clock frequency
+ * (fHRTIM) and the deadtime generator clock (fDTG)
+ */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL8 ((uint32_t)0x00000000) /*!< fDTG = fHRTIM * 8 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL4 (HRTIM_DTR_DTPRSC_0) /*!< fDTG = fHRTIM * 4 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL2 (HRTIM_DTR_DTPRSC_1) /*!< fDTG = fHRTIM * 2 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV1 (HRTIM_DTR_DTPRSC_1 | HRTIM_DTR_DTPRSC_0) /*!< fDTG = fHRTIM */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV2 (HRTIM_DTR_DTPRSC_2) /*!< fDTG = fHRTIM / 2 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV4 (HRTIM_DTR_DTPRSC_2 | HRTIM_DTR_DTPRSC_0) /*!< fDTG = fHRTIM / 4 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV8 (HRTIM_DTR_DTPRSC_2 | HRTIM_DTR_DTPRSC_1) /*!< fDTG = fHRTIM / 8 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV16 (HRTIM_DTR_DTPRSC_2 | HRTIM_DTR_DTPRSC_1 | HRTIM_DTR_DTPRSC_0) /*!< fDTG = fHRTIM / 16 */
+
+#define IS_HRTIM_TIMDEADTIME_PRESCALERRATIO(PRESCALERRATIO)\
+ (((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL8) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL4) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL2) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV1) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV2) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV4) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV8) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Rising_Sign
+ * @{
+ * @brief Constants defining whether the deadtime is positive or negative
+ * (overlapping signal) on rising edge
+ */
+#define HRTIM_TIMDEADTIME_RISINGSIGN_POSITIVE ((uint32_t)0x00000000) /*!< Positive deadtime on rising edge */
+#define HRTIM_TIMDEADTIME_RISINGSIGN_NEGATIVE (HRTIM_DTR_SDTR) /*!< Negative deadtime on rising edge */
+
+#define IS_HRTIM_TIMDEADTIME_RISINGSIGN(RISINGSIGN)\
+ (((RISINGSIGN) == HRTIM_TIMDEADTIME_RISINGSIGN_POSITIVE) || \
+ ((RISINGSIGN) == HRTIM_TIMDEADTIME_RISINGSIGN_NEGATIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Rising_Lock
+ * @{
+ * @brief Constants defining whether or not the deadtime (rising sign and
+ * value) is write protected
+ */
+#define HRTIM_TIMDEADTIME_RISINGLOCK_WRITE ((uint32_t)0x00000000) /*!< Deadtime rising value and sign is writable */
+#define HRTIM_TIMDEADTIME_RISINGLOCK_READONLY (HRTIM_DTR_DTRLK) /*!< Deadtime rising value and sign is read-only */
+
+#define IS_HRTIM_TIMDEADTIME_RISINGLOCK(RISINGLOCK)\
+ (((RISINGLOCK) == HRTIM_TIMDEADTIME_RISINGLOCK_WRITE) || \
+ ((RISINGLOCK) == HRTIM_TIMDEADTIME_RISINGLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Rising_Sign_Lock
+ * @{
+ * @brief Constants defining whether or not the deadtime rising sign is write
+ * protected
+ */
+#define HRTIM_TIMDEADTIME_RISINGSIGNLOCK_WRITE ((uint32_t)0x00000000) /*!< Deadtime rising sign is writable */
+#define HRTIM_TIMDEADTIME_RISINGSIGNLOCK_READONLY (HRTIM_DTR_DTRSLK) /*!< Deadtime rising sign is read-only */
+
+#define IS_HRTIM_TIMDEADTIME_RISINGSIGNLOCK(RISINGSIGNLOCK)\
+ (((RISINGSIGNLOCK) == HRTIM_TIMDEADTIME_RISINGSIGNLOCK_WRITE) || \
+ ((RISINGSIGNLOCK) == HRTIM_TIMDEADTIME_RISINGSIGNLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Falling_Sign
+ * @{
+ * @brief Constants defining whether the deadtime is positive or negative
+ * (overlapping signal) on falling edge
+ */
+#define HRTIM_TIMDEADTIME_FALLINGSIGN_POSITIVE ((uint32_t)0x00000000) /*!< Positive deadtime on falling edge */
+#define HRTIM_TIMDEADTIME_FALLINGSIGN_NEGATIVE (HRTIM_DTR_SDTF) /*!< Negative deadtime on falling edge */
+
+#define IS_HRTIM_TIMDEADTIME_FALLINGSIGN(FALLINGSIGN)\
+ (((FALLINGSIGN) == HRTIM_TIMDEADTIME_FALLINGSIGN_POSITIVE) || \
+ ((FALLINGSIGN) == HRTIM_TIMDEADTIME_FALLINGSIGN_NEGATIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Falling_Lock
+ * @{
+ * @brief Constants defining whether or not the deadtime (falling sign and
+ * value) is write protected
+ */
+#define HRTIM_TIMDEADTIME_FALLINGLOCK_WRITE ((uint32_t)0x00000000) /*!< Deadtime falling value and sign is writable */
+#define HRTIM_TIMDEADTIME_FALLINGLOCK_READONLY (HRTIM_DTR_DTFLK) /*!< Deadtime falling value and sign is read-only */
+
+#define IS_HRTIM_TIMDEADTIME_FALLINGLOCK(FALLINGLOCK)\
+ (((FALLINGLOCK) == HRTIM_TIMDEADTIME_FALLINGLOCK_WRITE) || \
+ ((FALLINGLOCK) == HRTIM_TIMDEADTIME_FALLINGLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Falling_Sign_Lock
+ * @{
+ * @brief Constants defining whether or not the deadtime falling sign is write
+ * protected
+ */
+#define HRTIM_TIMDEADTIME_FALLINGSIGNLOCK_WRITE ((uint32_t)0x00000000) /*!< Deadtime falling sign is writable */
+#define HRTIM_TIMDEADTIME_FALLINGSIGNLOCK_READONLY (HRTIM_DTR_DTFSLK) /*!< Deadtime falling sign is read-only */
+
+#define IS_HRTIM_TIMDEADTIME_FALLINGSIGNLOCK(FALLINGSIGNLOCK)\
+ (((FALLINGSIGNLOCK) == HRTIM_TIMDEADTIME_FALLINGSIGNLOCK_WRITE) || \
+ ((FALLINGSIGNLOCK) == HRTIM_TIMDEADTIME_FALLINGSIGNLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Chopper_Frequency
+ * @{
+ * @brief Constants defining the frequency of the generated high frequency carrier
+ */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV16 ((uint32_t)0x000000) /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV32 (HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 32 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV48 (HRTIM_CHPR_CARFRQ_1) /*!< fCHPFRQ = fHRTIM / 48 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV64 (HRTIM_CHPR_CARFRQ_1 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 64 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV80 (HRTIM_CHPR_CARFRQ_2) /*!< fCHPFRQ = fHRTIM / 80 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV96 (HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 96 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV112 (HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_1) /*!< fCHPFRQ = fHRTIM / 112 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV128 (HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_1 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 128 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV144 (HRTIM_CHPR_CARFRQ_3) /*!< fCHPFRQ = fHRTIM / 144 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV160 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 160 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV176 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_1) /*!< fCHPFRQ = fHRTIM / 176 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV192 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_1 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 192 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV208 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_2) /*!< fCHPFRQ = fHRTIM / 208 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV224 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 224 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV240 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_1) /*!< fCHPFRQ = fHRTIM / 240 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV256 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_1 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 256 */
+
+#define IS_HRTIM_CHOPPER_PRESCALERRATIO(PRESCALERRATIO)\
+ (((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV16) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV32) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV48) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV64) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV80) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV96) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV112) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV128) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV144) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV160) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV176) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV192) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV208) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV224) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV240) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV256))
+ /**
+ * @}
+ */
+
+/** @defgroup HRTIM_Chopper_Duty_Cycle
+ * @{
+ * @brief Constants defining the duty cycle of the generated high frequency carrier
+ * Duty cycle can be adjusted by 1/8 step (from 0/8 up to 7/8)
+ */
+#define HRTIM_CHOPPER_DUTYCYCLE_0 ((uint32_t)0x000000) /*!< 0/8 (i.e. only 1st pulse is present) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_125 (HRTIM_CHPR_CARDTY_0) /*!< 1/8 (12.5 %)*/ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_250 (HRTIM_CHPR_CARDTY_1) /*!< 2/8 (25 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_375 (HRTIM_CHPR_CARDTY_1 | HRTIM_CHPR_CARDTY_0) /*!< 3/8 (37.5 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_500 (HRTIM_CHPR_CARDTY_2) /*!< 4/8 (50 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_625 (HRTIM_CHPR_CARDTY_2 | HRTIM_CHPR_CARDTY_0) /*!< 5/8 (62.5 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_750 (HRTIM_CHPR_CARDTY_2 | HRTIM_CHPR_CARDTY_1) /*!< 6/8 (75 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_875 (HRTIM_CHPR_CARDTY_2 | HRTIM_CHPR_CARDTY_1 | HRTIM_CHPR_CARDTY_0) /*!< 7/8 (87.5 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+
+#define IS_HRTIM_CHOPPER_DUTYCYCLE(DUTYCYCLE)\
+ (((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_0) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_125) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_250) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_375) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_500) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_625) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_750) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_875))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Chopper_Start_Pulse_Width
+ * @{
+ * @brief Constants defining the pulse width of the first pulse of the generated
+ * high frequency carrier
+ */
+#define HRTIM_CHOPPER_PULSEWIDTH_16 ((uint32_t)0x000000) /*!< tSTPW = tHRTIM x 16 */
+#define HRTIM_CHOPPER_PULSEWIDTH_32 (HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 32 */
+#define HRTIM_CHOPPER_PULSEWIDTH_48 (HRTIM_CHPR_STRPW_1) /*!< tSTPW = tHRTIM x 48 */
+#define HRTIM_CHOPPER_PULSEWIDTH_64 (HRTIM_CHPR_STRPW_1 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 64 */
+#define HRTIM_CHOPPER_PULSEWIDTH_80 (HRTIM_CHPR_STRPW_2) /*!< tSTPW = tHRTIM x 80 */
+#define HRTIM_CHOPPER_PULSEWIDTH_96 (HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 96 */
+#define HRTIM_CHOPPER_PULSEWIDTH_112 (HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_1) /*!< tSTPW = tHRTIM x 112 */
+#define HRTIM_CHOPPER_PULSEWIDTH_128 (HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_1 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 128 */
+#define HRTIM_CHOPPER_PULSEWIDTH_144 (HRTIM_CHPR_STRPW_3) /*!< tSTPW = tHRTIM x 144 */
+#define HRTIM_CHOPPER_PULSEWIDTH_160 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 160 */
+#define HRTIM_CHOPPER_PULSEWIDTH_176 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_1) /*!< tSTPW = tHRTIM x 176 */
+#define HRTIM_CHOPPER_PULSEWIDTH_192 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_1 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 192 */
+#define HRTIM_CHOPPER_PULSEWIDTH_208 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_2) /*!< tSTPW = tHRTIM x 208 */
+#define HRTIM_CHOPPER_PULSEWIDTH_224 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 224 */
+#define HRTIM_CHOPPER_PULSEWIDTH_240 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_1) /*!< tSTPW = tHRTIM x 240 */
+#define HRTIM_CHOPPER_PULSEWIDTH_256 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_1 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 256 */
+
+#define IS_HRTIM_CHOPPER_PULSEWIDTH(PULSEWIDTH)\
+ (((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_16) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_32) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_48) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_64) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_80) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_96) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_112) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_128) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_144) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_160) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_176) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_192) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_208) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_224) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_240) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_256))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Synchronization_Options
+ * @{
+ * @brief Constants defining the options for synchronizing multiple HRTIM
+ * instances, as a master unit (generating a synchronization signal)
+ * or as a slave (waiting for a trigger to be synchronized)
+ */
+#define HRTIM_SYNCOPTION_NONE (uint32_t)0x00000000 /*!< HRTIM instance doesn't handle external synchronization signals (SYNCIN, SYNCOUT) */
+#define HRTIM_SYNCOPTION_MASTER (uint32_t)0x00000001 /*!< HRTIM instance acts as a MASTER, i.e. generates external synchronization output (SYNCOUT)*/
+#define HRTIM_SYNCOPTION_SLAVE (uint32_t)0x00000002 /*!< HRTIM instance acts as a SLAVE, i.e. it is synchronized by external sources (SYNCIN) */
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Synchronization_Input_Source
+ * @{
+ * @brief Constants defining defining the synchronization input source
+ */
+#define HRTIM_SYNCINPUTSOURCE_NONE (uint32_t)0x00000000 /*!< disabled. HRTIM is not synchronized and runs in standalone mode */
+#define HRTIM_SYNCINPUTSOURCE_INTERNALEVENT HRTIM_MCR_SYNC_IN_1 /*!< The HRTIM is synchronized with the on-chip timer */
+#define HRTIM_SYNCINPUTSOURCE_EXTERNALEVENT (HRTIM_MCR_SYNC_IN_1 | HRTIM_MCR_SYNC_IN_0) /*!< A positive pulse on SYNCIN input triggers the HRTIM */
+
+#define IS_HRTIM_SYNCINPUTSOURCE(SYNCINPUTSOURCE)\
+ (((SYNCINPUTSOURCE) == HRTIM_SYNCINPUTSOURCE_NONE) || \
+ ((SYNCINPUTSOURCE) == HRTIM_SYNCINPUTSOURCE_INTERNALEVENT) || \
+ ((SYNCINPUTSOURCE) == HRTIM_SYNCINPUTSOURCE_EXTERNALEVENT))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Synchronization_Output_Source
+ * @{
+ * @brief Constants defining the source and event to be sent on the
+ * synchronization outputs
+ */
+#define HRTIM_SYNCOUTPUTSOURCE_MASTER_START (uint32_t)0x00000000 /*!< A pulse is sent on the SYNCOUT output (16x fHRTIM clock cycles) upon master timer start event */
+#define HRTIM_SYNCOUTPUTSOURCE_MASTER_CMP1 (HRTIM_MCR_SYNC_SRC_0) /*!< A pulse is sent on the SYNCOUT output (16x fHRTIM clock cycles) upon master timer compare 1 event*/
+#define HRTIM_SYNCOUTPUTSOURCE_TIMA_START (HRTIM_MCR_SYNC_SRC_1) /*!< A pulse is sent on the SYNCOUT output (16x fHRTIM clock cycles) upon timer A start or reset events */
+#define HRTIM_SYNCOUTPUTSOURCE_TIMA_CMP1 (HRTIM_MCR_SYNC_SRC_1 | HRTIM_MCR_SYNC_SRC_0) /*!< A pulse is sent on the SYNCOUT output (16x fHRTIM clock cycles) upon timer A compare 1 event */
+
+#define IS_HRTIM_SYNCOUTPUTSOURCE(SYNCOUTPUTSOURCE)\
+ (((SYNCOUTPUTSOURCE) == HRTIM_SYNCOUTPUTSOURCE_MASTER_START) || \
+ ((SYNCOUTPUTSOURCE) == HRTIM_SYNCOUTPUTSOURCE_MASTER_CMP1) || \
+ ((SYNCOUTPUTSOURCE) == HRTIM_SYNCOUTPUTSOURCE_TIMA_START) || \
+ ((SYNCOUTPUTSOURCE) == HRTIM_SYNCOUTPUTSOURCE_TIMA_CMP1))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Synchronization_Output_Polarity
+ * @{
+ * @brief Constants defining the routing and conditioning of the synchronization output event
+ */
+#define HRTIM_SYNCOUTPUTPOLARITY_NONE (uint32_t)0x00000000 /*!< Synchronization output event is disabled */
+#define HRTIM_SYNCOUTPUTPOLARITY_POSITIVE (HRTIM_MCR_SYNC_OUT_1) /*!< Positive pulse on SCOUT output (16x fHRTIM clock cycles) */
+#define HRTIM_SYNCOUTPUTPOLARITY_NEGATIVE (HRTIM_MCR_SYNC_OUT_1 | HRTIM_MCR_SYNC_OUT_0) /*!< Positive pulse on SCOUT output (16x fHRTIM clock cycles) */
+
+#define IS_HRTIM_SYNCOUTPUTPOLARITY(SYNCOUTPUTPOLARITY)\
+ (((SYNCOUTPUTPOLARITY) == HRTIM_SYNCOUTPUTPOLARITY_NONE) || \
+ ((SYNCOUTPUTPOLARITY) == HRTIM_SYNCOUTPUTPOLARITY_POSITIVE) || \
+ ((SYNCOUTPUTPOLARITY) == HRTIM_SYNCOUTPUTPOLARITY_NEGATIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Sources
+ * @{
+ * @brief Constants defining available sources associated to external events
+ */
+#define HRTIM_EVENTSRC_1 ((uint32_t)0x00000000) /*!< External event source 1 */
+#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) /*!< External event source 2 */
+#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) /*!< External event source 3 */
+#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) /*!< External event source 4 */
+
+#define IS_HRTIM_EVENTSRC(EVENTSRC)\
+ (((EVENTSRC) == HRTIM_EVENTSRC_1) || \
+ ((EVENTSRC) == HRTIM_EVENTSRC_2) || \
+ ((EVENTSRC) == HRTIM_EVENTSRC_3) || \
+ ((EVENTSRC) == HRTIM_EVENTSRC_4))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Polarity
+ * @{
+ * @brief Constants defining the polarity of an external event
+ */
+#define HRTIM_EVENTPOLARITY_HIGH ((uint32_t)0x00000000) /*!< External event is active high */
+#define HRTIM_EVENTPOLARITY_LOW (HRTIM_EECR1_EE1POL) /*!< External event is active low */
+
+#define IS_HRTIM_EVENTPOLARITY(EVENTSENSITIVITY, EVENTPOLARITY)\
+ ((((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_LEVEL) && \
+ (((EVENTPOLARITY) == HRTIM_EVENTPOLARITY_HIGH) || \
+ ((EVENTPOLARITY) == HRTIM_EVENTPOLARITY_LOW))) \
+ || \
+ (((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_RISINGEDGE) || \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_FALLINGEDGE)|| \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_BOTHEDGES)))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Sensitivity
+ * @{
+ * @brief Constants defining the sensitivity (level-sensitive or edge-sensitive)
+ * of an external event
+ */
+#define HRTIM_EVENTSENSITIVITY_LEVEL ((uint32_t)0x00000000) /*!< External event is active on level */
+#define HRTIM_EVENTSENSITIVITY_RISINGEDGE (HRTIM_EECR1_EE1SNS_0) /*!< External event is active on Rising edge */
+#define HRTIM_EVENTSENSITIVITY_FALLINGEDGE (HRTIM_EECR1_EE1SNS_1) /*!< External event is active on Falling edge */
+#define HRTIM_EVENTSENSITIVITY_BOTHEDGES (HRTIM_EECR1_EE1SNS_1 | HRTIM_EECR1_EE1SNS_0) /*!< External event is active on Rising and Falling edges */
+
+#define IS_HRTIM_EVENTSENSITIVITY(EVENTSENSITIVITY)\
+ (((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_LEVEL) || \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_RISINGEDGE) || \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_FALLINGEDGE) || \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_BOTHEDGES))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Fast_Mode
+ * @{
+ * @brief Constants defining whether or not an external event is programmed in
+ fast mode
+ */
+#define HRTIM_EVENTFASTMODE_DISABLE ((uint32_t)0x00000000) /*!< External Event is acting asynchronously on outputs (low latency mode) */
+#define HRTIM_EVENTFASTMODE_ENABLE (HRTIM_EECR1_EE1FAST) /*!< External Event is re-synchronized by the HRTIM logic before acting on outputs */
+
+#define IS_HRTIM_EVENTFASTMODE(EVENT, FASTMODE)\
+ (((((EVENT) == HRTIM_EVENT_1) || \
+ ((EVENT) == HRTIM_EVENT_2) || \
+ ((EVENT) == HRTIM_EVENT_3) || \
+ ((EVENT) == HRTIM_EVENT_4) || \
+ ((EVENT) == HRTIM_EVENT_5)) && \
+ (((FASTMODE) == HRTIM_EVENTFASTMODE_ENABLE) || \
+ ((FASTMODE) == HRTIM_EVENTFASTMODE_DISABLE))) \
+ || \
+ (((EVENT) == HRTIM_EVENT_6) || \
+ ((EVENT) == HRTIM_EVENT_7) || \
+ ((EVENT) == HRTIM_EVENT_8) || \
+ ((EVENT) == HRTIM_EVENT_9) || \
+ ((EVENT) == HRTIM_EVENT_10)))
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Filter
+ * @{
+ * @brief Constants defining the frequency used to sample an external event 6
+ * input and the length (N) of the digital filter applied
+ */
+#define HRTIM_EVENTFILTER_NONE ((uint32_t)0x00000000) /*!< Filter disabled */
+#define HRTIM_EVENTFILTER_1 (HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fHRTIM, N=2 */
+#define HRTIM_EVENTFILTER_2 (HRTIM_EECR3_EE6F_1) /*!< fSAMPLING= fHRTIM, N=4 */
+#define HRTIM_EVENTFILTER_3 (HRTIM_EECR3_EE6F_1 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fHRTIM, N=8 */
+#define HRTIM_EVENTFILTER_4 (HRTIM_EECR3_EE6F_2) /*!< fSAMPLING= fEEVS/2, N=6 */
+#define HRTIM_EVENTFILTER_5 (HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/2, N=8 */
+#define HRTIM_EVENTFILTER_6 (HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_1) /*!< fSAMPLING= fEEVS/4, N=6 */
+#define HRTIM_EVENTFILTER_7 (HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_1 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/4, N=8 */
+#define HRTIM_EVENTFILTER_8 (HRTIM_EECR3_EE6F_3) /*!< fSAMPLING= fEEVS/8, N=6 */
+#define HRTIM_EVENTFILTER_9 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/8, N=8 */
+#define HRTIM_EVENTFILTER_10 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_1) /*!< fSAMPLING= fEEVS/16, N=5 */
+#define HRTIM_EVENTFILTER_11 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_1 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/16, N=6 */
+#define HRTIM_EVENTFILTER_12 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_2) /*!< fSAMPLING= fEEVS/16, N=8 */
+#define HRTIM_EVENTFILTER_13 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/32, N=5 */
+#define HRTIM_EVENTFILTER_14 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_1) /*!< fSAMPLING= fEEVS/32, N=6 */
+#define HRTIM_EVENTFILTER_15 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_1 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/32, N=8 */
+
+#define IS_HRTIM_EVENTFILTER(EVENT, FILTER)\
+ ((((EVENT) == HRTIM_EVENT_1) || \
+ ((EVENT) == HRTIM_EVENT_2) || \
+ ((EVENT) == HRTIM_EVENT_3) || \
+ ((EVENT) == HRTIM_EVENT_4) || \
+ ((EVENT) == HRTIM_EVENT_5)) \
+ || \
+ ((((EVENT) == HRTIM_EVENT_6) || \
+ ((EVENT) == HRTIM_EVENT_7) || \
+ ((EVENT) == HRTIM_EVENT_8) || \
+ ((EVENT) == HRTIM_EVENT_9) || \
+ ((EVENT) == HRTIM_EVENT_10)) && \
+ (((FILTER) == HRTIM_EVENTFILTER_NONE) || \
+ ((FILTER) == HRTIM_EVENTFILTER_1) || \
+ ((FILTER) == HRTIM_EVENTFILTER_2) || \
+ ((FILTER) == HRTIM_EVENTFILTER_3) || \
+ ((FILTER) == HRTIM_EVENTFILTER_4) || \
+ ((FILTER) == HRTIM_EVENTFILTER_5) || \
+ ((FILTER) == HRTIM_EVENTFILTER_6) || \
+ ((FILTER) == HRTIM_EVENTFILTER_7) || \
+ ((FILTER) == HRTIM_EVENTFILTER_8) || \
+ ((FILTER) == HRTIM_EVENTFILTER_9) || \
+ ((FILTER) == HRTIM_EVENTFILTER_10) || \
+ ((FILTER) == HRTIM_EVENTFILTER_11) || \
+ ((FILTER) == HRTIM_EVENTFILTER_12) || \
+ ((FILTER) == HRTIM_EVENTFILTER_13) || \
+ ((FILTER) == HRTIM_EVENTFILTER_14) || \
+ ((FILTER) == HRTIM_EVENTFILTER_15))))
+/**
+ * @}
+ */
+
+/** @defgroup External_Event_Prescaler
+ * @{
+ * @brief Constants defining division ratio between the timer clock frequency
+ * fHRTIM) and the external event signal sampling clock (fEEVS)
+ * used by the digital filters
+ */
+#define HRTIM_EVENTPRESCALER_DIV1 ((uint32_t)0x00000000) /*!< fEEVS=fHRTIM */
+#define HRTIM_EVENTPRESCALER_DIV2 (HRTIM_EECR3_EEVSD_0) /*!< fEEVS=fHRTIM / 2 */
+#define HRTIM_EVENTPRESCALER_DIV4 (HRTIM_EECR3_EEVSD_1) /*!< fEEVS=fHRTIM / 4 */
+#define HRTIM_EVENTPRESCALER_DIV8 (HRTIM_EECR3_EEVSD_1 | HRTIM_EECR3_EEVSD_0) /*!< fEEVS=fHRTIM / 8 */
+
+#define IS_HRTIM_EVENTPRESCALER(EVENTPRESCALER)\
+ (((EVENTPRESCALER) == HRTIM_EVENTPRESCALER_DIV1) || \
+ ((EVENTPRESCALER) == HRTIM_EVENTPRESCALER_DIV2) || \
+ ((EVENTPRESCALER) == HRTIM_EVENTPRESCALER_DIV4) || \
+ ((EVENTPRESCALER) == HRTIM_EVENTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Sources
+ * @{
+ * @brief Constants defining whether a faults is be triggered by any external
+ * or internal fault source
+ */
+#define HRTIM_FAULTSOURCE_DIGITALINPUT ((uint32_t)0x00000000) /*!< Fault input is FLT input pin */
+#define HRTIM_FAULTSOURCE_INTERNAL (HRTIM_FLTINR1_FLT1SRC) /*!< Fault input is FLT_Int signal (e.g. internal comparator) */
+
+
+#define IS_HRTIM_FAULTSOURCE(FAULTSOURCE)\
+ (((FAULTSOURCE) == HRTIM_FAULTSOURCE_DIGITALINPUT) || \
+ ((FAULTSOURCE) == HRTIM_FAULTSOURCE_INTERNAL))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Polarity
+ * @{
+ * @brief Constants defining the polarity of a fault event
+ */
+#define HRTIM_FAULTPOLARITY_LOW ((uint32_t)0x00000000) /*!< Fault input is active low */
+#define HRTIM_FAULTPOLARITY_HIGH (HRTIM_FLTINR1_FLT1P) /*!< Fault input is active high */
+
+#define IS_HRTIM_FAULTPOLARITY(HRTIM_FAULTPOLARITY)\
+ (((HRTIM_FAULTPOLARITY) == HRTIM_FAULTPOLARITY_LOW) || \
+ ((HRTIM_FAULTPOLARITY) == HRTIM_FAULTPOLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Filter
+ * @{
+ * @ brief Constants defining the frequency used to sample the fault input and
+ * the length (N) of the digital filter applied
+ */
+#define HRTIM_FAULTFILTER_NONE ((uint32_t)0x00000000) /*!< Filter disabled */
+#define HRTIM_FAULTFILTER_1 (HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fHRTIM, N=2 */
+#define HRTIM_FAULTFILTER_2 (HRTIM_FLTINR1_FLT1F_1) /*!< fSAMPLING= fHRTIM, N=4 */
+#define HRTIM_FAULTFILTER_3 (HRTIM_FLTINR1_FLT1F_1 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fHRTIM, N=8 */
+#define HRTIM_FAULTFILTER_4 (HRTIM_FLTINR1_FLT1F_2) /*!< fSAMPLING= fFLTS/2, N=6 */
+#define HRTIM_FAULTFILTER_5 (HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/2, N=8 */
+#define HRTIM_FAULTFILTER_6 (HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_1) /*!< fSAMPLING= fFLTS/4, N=6 */
+#define HRTIM_FAULTFILTER_7 (HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_1 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/4, N=8 */
+#define HRTIM_FAULTFILTER_8 (HRTIM_FLTINR1_FLT1F_3) /*!< fSAMPLING= fFLTS/8, N=6 */
+#define HRTIM_FAULTFILTER_9 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/8, N=8 */
+#define HRTIM_FAULTFILTER_10 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_1) /*!< fSAMPLING= fFLTS/16, N=5 */
+#define HRTIM_FAULTFILTER_11 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_1 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/16, N=6 */
+#define HRTIM_FAULTFILTER_12 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_2) /*!< fSAMPLING= fFLTS/16, N=8 */
+#define HRTIM_FAULTFILTER_13 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/32, N=5 */
+#define HRTIM_FAULTFILTER_14 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_1) /*!< fSAMPLING= fFLTS/32, N=6 */
+#define HRTIM_FAULTFILTER_15 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_1 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/32, N=8 */
+
+#define IS_HRTIM_FAULTFILTER(FAULTFILTER)\
+ (((FAULTFILTER) == HRTIM_FAULTFILTER_NONE) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_1) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_2) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_3) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_4) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_5) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_6) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_7) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_8) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_9) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_10) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_11) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_12) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_13) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_14) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_15))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Lock
+ * @{
+ * @brief Constants defining whether or not the fault programming bits are
+ write protected
+ */
+#define HRTIM_FAULTLOCK_READWRITE ((uint32_t)0x00000000) /*!< Fault settings bits are read/write */
+#define HRTIM_FAULTLOCK_READONLY (HRTIM_FLTINR1_FLT1LCK) /*!< Fault settings bits are read only */
+
+#define IS_HRTIM_FAULTLOCK(FAULTLOCK)\
+ (((FAULTLOCK) == HRTIM_FAULTLOCK_READWRITE) || \
+ ((FAULTLOCK) == HRTIM_FAULTLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup External_Fault_Prescaler
+ * @{
+ * @brief Constants defining the division ratio between the timer clock
+ * frequency (fHRTIM) and the fault signal sampling clock (fFLTS) used
+ * by the digital filters.
+ */
+#define HRTIM_FAULTPRESCALER_DIV1 ((uint32_t)0x00000000) /*!< fFLTS=fHRTIM */
+#define HRTIM_FAULTPRESCALER_DIV2 (HRTIM_FLTINR2_FLTSD_0) /*!< fFLTS=fHRTIM / 2 */
+#define HRTIM_FAULTPRESCALER_DIV4 (HRTIM_FLTINR2_FLTSD_1) /*!< fFLTS=fHRTIM / 4 */
+#define HRTIM_FAULTPRESCALER_DIV8 (HRTIM_FLTINR2_FLTSD_1 | HRTIM_FLTINR2_FLTSD_0) /*!< fFLTS=fHRTIM / 8 */
+
+#define IS_HRTIM_FAULTPRESCALER(FAULTPRESCALER)\
+ (((FAULTPRESCALER) == HRTIM_FAULTPRESCALER_DIV1) || \
+ ((FAULTPRESCALER) == HRTIM_FAULTPRESCALER_DIV2) || \
+ ((FAULTPRESCALER) == HRTIM_FAULTPRESCALER_DIV4) || \
+ ((FAULTPRESCALER) == HRTIM_FAULTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Operating_mode
+ * @{
+ * @brief Constants defining if the burst mode is entered once or if it is
+ * continuously operating
+ */
+#define HRTIM_BURSTMODE_SINGLESHOT ((uint32_t)0x00000000) /*!< Burst mode operates in single shot mode */
+#define HRTIM_BURSTMODE_CONTINOUS (HRTIM_BMCR_BMOM) /*!< Burst mode operates in continuous mode */
+
+#define IS_HRTIM_BURSTMODE(BURSTMODE)\
+ (((BURSTMODE) == HRTIM_BURSTMODE_SINGLESHOT) || \
+ ((BURSTMODE) == HRTIM_BURSTMODE_CONTINOUS))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Clock_Source
+ * @{
+ * @brief Constants defining the clock source for the burst mode counter
+ */
+#define HRTIM_BURSTMODECLOCKSOURCE_MASTER ((uint32_t)0x00000000) /*!< Master timer counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_A (HRTIM_BMCR_BMCLK_0) /*!< Timer A counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_B (HRTIM_BMCR_BMCLK_1) /*!< Timer B counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_C (HRTIM_BMCR_BMCLK_1 | HRTIM_BMCR_BMCLK_0) /*!< Timer C counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_D (HRTIM_BMCR_BMCLK_2) /*!< Timer D counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_E (HRTIM_BMCR_BMCLK_2 | HRTIM_BMCR_BMCLK_0) /*!< Timer E counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIM16_OC (HRTIM_BMCR_BMCLK_2 | HRTIM_BMCR_BMCLK_1) /*!< On-chip Event 1 (BMClk[1]), acting as a burst mode counter clock */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIM17_OC (HRTIM_BMCR_BMCLK_2 | HRTIM_BMCR_BMCLK_1 | HRTIM_BMCR_BMCLK_0) /*!< On-chip Event 2 (BMClk[2]), acting as a burst mode counter clock */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIM7_TRGO (HRTIM_BMCR_BMCLK_3) /*!< On-chip Event 3 (BMClk[3]), acting as a burst mode counter clock */
+#define HRTIM_BURSTMODECLOCKSOURCE_FHRTIM (HRTIM_BMCR_BMCLK_3 | HRTIM_BMCR_BMCLK_1) /*!< Prescaled fHRTIM clock is used as clock source for the burst mode counter */
+
+#define IS_HRTIM_BURSTMODECLOCKSOURCE(BURSTMODECLOCKSOURCE)\
+ (((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_MASTER) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_A) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_B) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_C) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_D) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_E) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIM16_OC) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIM17_OC) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIM7_TRGO) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_FHRTIM))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Prescaler
+ * @{
+ * @brief Constants defining the prescaling ratio of the fHRTIM clock
+ * for the burst mode controller
+ */
+#define HRTIM_BURSTMODEPRESCALER_DIV1 ((uint32_t)0x00000000) /*!< fBRST = fHRTIM */
+#define HRTIM_BURSTMODEPRESCALER_DIV2 (HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/2 */
+#define HRTIM_BURSTMODEPRESCALER_DIV4 (HRTIM_BMCR_BMPRSC_1) /*!< fBRST = fHRTIM/4 */
+#define HRTIM_BURSTMODEPRESCALER_DIV8 (HRTIM_BMCR_BMPRSC_1 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/8 */
+#define HRTIM_BURSTMODEPRESCALER_DIV16 (HRTIM_BMCR_BMPRSC_2) /*!< fBRST = fHRTIM/16 */
+#define HRTIM_BURSTMODEPRESCALER_DIV32 (HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/32 */
+#define HRTIM_BURSTMODEPRESCALER_DIV64 (HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_1) /*!< fBRST = fHRTIM/64 */
+#define HRTIM_BURSTMODEPRESCALER_DIV128 (HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_1 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/128 */
+#define HRTIM_BURSTMODEPRESCALER_DIV256 (HRTIM_BMCR_BMPRSC_3) /*!< fBRST = fHRTIM/256 */
+#define HRTIM_BURSTMODEPRESCALER_DIV512 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/512 */
+#define HRTIM_BURSTMODEPRESCALER_DIV1024 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_1) /*!< fBRST = fHRTIM/1024 */
+#define HRTIM_BURSTMODEPRESCALER_DIV2048 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_1 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/2048*/
+#define HRTIM_BURSTMODEPRESCALER_DIV4096 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_2) /*!< fBRST = fHRTIM/4096 */
+#define HRTIM_BURSTMODEPRESCALER_DIV8192 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/8192 */
+#define HRTIM_BURSTMODEPRESCALER_DIV16384 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_1) /*!< fBRST = fHRTIM/16384 */
+#define HRTIM_BURSTMODEPRESCALER_DIV32768 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_1 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/32768 */
+
+#define IS_HRTIM_HRTIM_BURSTMODEPRESCALER(BURSTMODEPRESCALER)\
+ (((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV1) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV2) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV4) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV8) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV16) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV32) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV64) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV128) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV256) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV512) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV1024) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV2048) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV4096) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV8192) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV16384) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV32768))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Register_Preload_Enable
+ * @{
+ * @brief Constants defining whether or not burst mode registers preload
+ mechanism is enabled, i.e. a write access into a preloadable register
+ (HRTIM_BMCMPR, HRTIM_BMPER) is done into the active or the preload register
+ */
+#define HRIM_BURSTMODEPRELOAD_DISABLED ((uint32_t)0x00000000) /*!< Preload disabled: the write access is directly done into active registers */
+#define HRIM_BURSTMODEPRELOAD_ENABLED (HRTIM_BMCR_BMPREN) /*!< Preload enabled: the write access is done into preload registers */
+
+#define IS_HRTIM_BURSTMODEPRELOAD(BURSTMODEPRELOAD)\
+ (((BURSTMODEPRELOAD) == HRIM_BURSTMODEPRELOAD_DISABLED) || \
+ ((BURSTMODEPRELOAD) == HRIM_BURSTMODEPRELOAD_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Trigger
+ * @{
+ * @brief Constants defining the events that can be used tor trig the burst
+ * mode operation
+ */
+#define HRTIM_BURSTMODETRIGGER_NONE (uint32_t)0x00000000 /*!< No trigger */
+#define HRTIM_BURSTMODETRIGGER_MASTER_RESET (HRTIM_BMTRGR_MSTRST) /*!< Master reset */
+#define HRTIM_BURSTMODETRIGGER_MASTER_REPETITION (HRTIM_BMTRGR_MSTREP) /*!< Master repetition */
+#define HRTIM_BURSTMODETRIGGER_MASTER_CMP1 (HRTIM_BMTRGR_MSTCMP1) /*!< Master compare 1 */
+#define HRTIM_BURSTMODETRIGGER_MASTER_CMP2 (HRTIM_BMTRGR_MSTCMP2) /*!< Master compare 2 */
+#define HRTIM_BURSTMODETRIGGER_MASTER_CMP3 (HRTIM_BMTRGR_MSTCMP3) /*!< Master compare 3 */
+#define HRTIM_BURSTMODETRIGGER_MASTER_CMP4 (HRTIM_BMTRGR_MSTCMP4) /*!< Master compare 4 */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_RESET (HRTIM_BMTRGR_TARST) /*!< Timer A reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_REPETITION (HRTIM_BMTRGR_TAREP) /*!< Timer A repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_CMP1 (HRTIM_BMTRGR_TACMP1) /*!< Timer A compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_CMP2 (HRTIM_BMTRGR_TACMP2) /*!< Timer A compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERB_RESET (HRTIM_BMTRGR_TBRST) /*!< Timer B reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERB_REPETITION (HRTIM_BMTRGR_TBREP) /*!< Timer B repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERB_CMP1 (HRTIM_BMTRGR_TBCMP1) /*!< Timer B compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERB_CMP2 (HRTIM_BMTRGR_TBCMP2) /*!< Timer B compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERC_RESET (HRTIM_BMTRGR_TCRST) /*!< Timer C reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERC_REPETITION (HRTIM_BMTRGR_TCREP) /*!< Timer C repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERC_CMP1 (HRTIM_BMTRGR_TCCMP1) /*!< Timer C compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERC_CMP2 (HRTIM_BMTRGR_TCCMP2) /*!< Timer C compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_RESET (HRTIM_BMTRGR_TDRST) /*!< Timer D reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_REPETITION (HRTIM_BMTRGR_TDREP) /*!< Timer D repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_CMP1 (HRTIM_BMTRGR_TDCMP1) /*!< Timer D compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_CMP2 (HRTIM_BMTRGR_TDCMP2) /*!< Timer D compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERE_RESET (HRTIM_BMTRGR_TERST) /*!< Timer E reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERE_REPETITION (HRTIM_BMTRGR_TEREP) /*!< Timer E repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERE_CMP1 (HRTIM_BMTRGR_TECMP1) /*!< Timer E compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERE_CMP2 (HRTIM_BMTRGR_TECMP2) /*!< Timer E compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_EVENT7 (HRTIM_BMTRGR_TAEEV7) /*!< Timer A period following External Event 7 */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_EVENT8 (HRTIM_BMTRGR_TDEEV8) /*!< Timer D period following External Event 8 */
+#define HRTIM_BURSTMODETRIGGER_EVENT_7 (HRTIM_BMTRGR_EEV7) /*!< External Event 7 (timer A filters applied) */
+#define HRTIM_BURSTMODETRIGGER_EVENT_8 (HRTIM_BMTRGR_EEV8) /*!< External Event 8 (timer D filters applied)*/
+#define HRTIM_BURSTMODETRIGGER_EVENT_ONCHIP (HRTIM_BMTRGR_OCHPEV) /*!< On-chip Event */
+
+#define IS_HRTIM_BURSTMODETRIGGER(BURSTMODETRIGGER)\
+ (((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_NONE) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_CMP3) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_CMP4) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERB_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERB_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERB_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERB_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERC_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERC_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERC_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERC_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERE_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERE_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERE_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERE_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_EVENT7) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_EVENT8) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_EVENT_7) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_EVENT_8) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_EVENT_ONCHIP))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_ADC_Trigger_Update_Source
+ * @{
+ * @brief constants defining the source triggering the update of the
+ HRTIM_ADCxR register (transfer from preload to active register).
+ */
+#define HRTIM_ADCTRIGGERUPDATE_MASTER (uint32_t)0x00000000 /*!< Master timer */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_A (HRTIM_CR1_ADC1USRC_0) /*!< Timer A */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_B (HRTIM_CR1_ADC1USRC_1) /*!< Timer B */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_C (HRTIM_CR1_ADC1USRC_1 | HRTIM_CR1_ADC1USRC_0) /*!< Timer C */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_D (HRTIM_CR1_ADC1USRC_2) /*!< Timer D */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_E (HRTIM_CR1_ADC1USRC_2 | HRTIM_CR1_ADC1USRC_0) /*!< Timer E */
+
+#define IS_HRTIM_ADCTRIGGERUPDATE(ADCTRIGGERUPDATE)\
+ (((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_MASTER) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_A) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_B) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_C) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_D) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_E))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_ADC_Trigger_Event
+ * @{
+ * @brief constants defining the events triggering ADC conversion.
+ * HRTIM_ADCTRIGGEREVENT13_*: ADC Triggers 1 and 3
+ * HRTIM_ADCTRIGGEREVENT24_*: ADC Triggers 2 and 4
+ */
+#define HRTIM_ADCTRIGGEREVENT13_NONE (uint32_t)0x00000000 /*!< No ADC trigger event */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_CMP1 (HRTIM_ADC1R_AD1MC1) /*!< ADC Trigger on master compare 1 */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_CMP2 (HRTIM_ADC1R_AD1MC2) /*!< ADC Trigger on master compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_CMP3 (HRTIM_ADC1R_AD1MC3) /*!< ADC Trigger on master compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_CMP4 (HRTIM_ADC1R_AD1MC4) /*!< ADC Trigger on master compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_PERIOD (HRTIM_ADC1R_AD1MPER) /*!< ADC Trigger on master period */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_1 (HRTIM_ADC1R_AD1EEV1) /*!< ADC Trigger on external event 1 */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_2 (HRTIM_ADC1R_AD1EEV2) /*!< ADC Trigger on external event 2 */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_3 (HRTIM_ADC1R_AD1EEV3) /*!< ADC Trigger on external event 3 */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_4 (HRTIM_ADC1R_AD1EEV4) /*!< ADC Trigger on external event 4 */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_5 (HRTIM_ADC1R_AD1EEV5) /*!< ADC Trigger on external event 5 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_CMP2 (HRTIM_ADC1R_AD1TAC2) /*!< ADC Trigger on Timer A compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_CMP3 (HRTIM_ADC1R_AD1TAC3) /*!< ADC Trigger on Timer A compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_CMP4 (HRTIM_ADC1R_AD1TAC4) /*!< ADC Trigger on Timer A compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_PERIOD (HRTIM_ADC1R_AD1TAPER) /*!< ADC Trigger on Timer A period */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_RESET (HRTIM_ADC1R_AD1TARST) /*!< ADC Trigger on Timer A reset */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_CMP2 (HRTIM_ADC1R_AD1TBC2) /*!< ADC Trigger on Timer B compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_CMP3 (HRTIM_ADC1R_AD1TBC3) /*!< ADC Trigger on Timer B compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_CMP4 (HRTIM_ADC1R_AD1TBC4) /*!< ADC Trigger on Timer B compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_PERIOD (HRTIM_ADC1R_AD1TBPER) /*!< ADC Trigger on Timer B period */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_RESET (HRTIM_ADC1R_AD1TBRST) /*!< ADC Trigger on Timer B reset */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERC_CMP2 (HRTIM_ADC1R_AD1TCC2) /*!< ADC Trigger on Timer C compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERC_CMP3 (HRTIM_ADC1R_AD1TCC3) /*!< ADC Trigger on Timer C compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERC_CMP4 (HRTIM_ADC1R_AD1TCC4) /*!< ADC Trigger on Timer C compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERC_PERIOD (HRTIM_ADC1R_AD1TCPER) /*!< ADC Trigger on Timer C period */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERD_CMP2 (HRTIM_ADC1R_AD1TDC2) /*!< ADC Trigger on Timer D compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERD_CMP3 (HRTIM_ADC1R_AD1TDC3) /*!< ADC Trigger on Timer D compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERD_CMP4 (HRTIM_ADC1R_AD1TDC4) /*!< ADC Trigger on Timer D compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERD_PERIOD (HRTIM_ADC1R_AD1TDPER) /*!< ADC Trigger on Timer D period */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERE_CMP2 (HRTIM_ADC1R_AD1TEC2) /*!< ADC Trigger on Timer E compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERE_CMP3 (HRTIM_ADC1R_AD1TEC3) /*!< ADC Trigger on Timer E compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERE_CMP4 (HRTIM_ADC1R_AD1TEC4) /*!< ADC Trigger on Timer E compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERE_PERIOD (HRTIM_ADC1R_AD1TEPER) /*!< ADC Trigger on Timer E period */
+
+#define HRTIM_ADCTRIGGEREVENT24_NONE (uint32_t)0x00000000 /*!< No ADC trigger event */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_CMP1 (HRTIM_ADC2R_AD2MC1) /*!< ADC Trigger on master compare 1 */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_CMP2 (HRTIM_ADC2R_AD2MC2) /*!< ADC Trigger on master compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_CMP3 (HRTIM_ADC2R_AD2MC3) /*!< ADC Trigger on master compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_CMP4 (HRTIM_ADC2R_AD2MC4) /*!< ADC Trigger on master compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_PERIOD (HRTIM_ADC2R_AD2MPER) /*!< ADC Trigger on master period */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_6 (HRTIM_ADC2R_AD2EEV6) /*!< ADC Trigger on external event 6 */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_7 (HRTIM_ADC2R_AD2EEV7) /*!< ADC Trigger on external event 7 */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_8 (HRTIM_ADC2R_AD2EEV8) /*!< ADC Trigger on external event 8 */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_9 (HRTIM_ADC2R_AD2EEV9) /*!< ADC Trigger on external event 9 */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_10 (HRTIM_ADC2R_AD2EEV10) /*!< ADC Trigger on external event 10 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERA_CMP2 (HRTIM_ADC2R_AD2TAC2) /*!< ADC Trigger on Timer A compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERA_CMP3 (HRTIM_ADC2R_AD2TAC3) /*!< ADC Trigger on Timer A compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERA_CMP4 (HRTIM_ADC2R_AD2TAC4) /*!< ADC Trigger on Timer A compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERA_PERIOD (HRTIM_ADC2R_AD2TAPER) /*!< ADC Trigger on Timer A period */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERB_CMP2 (HRTIM_ADC2R_AD2TBC2) /*!< ADC Trigger on Timer B compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERB_CMP3 (HRTIM_ADC2R_AD2TBC3) /*!< ADC Trigger on Timer B compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERB_CMP4 (HRTIM_ADC2R_AD2TBC4) /*!< ADC Trigger on Timer B compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERB_PERIOD (HRTIM_ADC2R_AD2TBPER) /*!< ADC Trigger on Timer B period */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_CMP2 (HRTIM_ADC2R_AD2TCC2) /*!< ADC Trigger on Timer C compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_CMP3 (HRTIM_ADC2R_AD2TCC3) /*!< ADC Trigger on Timer C compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_CMP4 (HRTIM_ADC2R_AD2TCC4) /*!< ADC Trigger on Timer C compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_PERIOD (HRTIM_ADC2R_AD2TCPER) /*!< ADC Trigger on Timer C period */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_RESET (HRTIM_ADC2R_AD2TCRST) /*!< ADC Trigger on Timer C reset */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_CMP2 (HRTIM_ADC2R_AD2TDC2) /*!< ADC Trigger on Timer D compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_CMP3 (HRTIM_ADC2R_AD2TDC3) /*!< ADC Trigger on Timer D compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_CMP4 (HRTIM_ADC2R_AD2TDC4) /*!< ADC Trigger on Timer D compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_PERIOD (HRTIM_ADC2R_AD2TDPER) /*!< ADC Trigger on Timer D period */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_RESET (HRTIM_ADC2R_AD2TDRST) /*!< ADC Trigger on Timer D reset */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERE_CMP2 (HRTIM_ADC2R_AD2TEC2) /*!< ADC Trigger on Timer E compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERE_CMP3 (HRTIM_ADC2R_AD2TEC3) /*!< ADC Trigger on Timer E compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERE_CMP4 (HRTIM_ADC2R_AD2TEC4) /*!< ADC Trigger on Timer E compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERE_RESET (HRTIM_ADC2R_AD2TERST) /*!< ADC Trigger on Timer E reset */
+
+/**
+ * @}
+ */
+
+/** @defgroup DLL_Calibration_Rate
+ * @{
+ * @brief Constants defining the DLL calibration periods (in micro seconds)
+ */
+#define HRTIM_SINGLE_CALIBRATION (uint32_t)0xFFFFFFFF /*!< Non periodic DLL calibration */
+#define HRTIM_CALIBRATIONRATE_7300 (uint32_t)0x00000000 /*!< Periodic DLL calibration: T = 1048576 * tHRTIM (7.3 ms) */
+#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) /*!< Periodic DLL calibration: T = 131072 * tHRTIM (910 µs) */
+#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) /*!< Periodic DLL calibration: T = 16384 * tHRTIM (114 µs) */
+#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) /*!< Periodic DLL calibration: T = 2048 * tHRTIM (14 µs) */
+
+#define IS_HRTIM_CALIBRATIONRATE(CALIBRATIONRATE)\
+ (((CALIBRATIONRATE) == HRTIM_SINGLE_CALIBRATION) || \
+ ((CALIBRATIONRATE) == HRTIM_CALIBRATIONRATE_7300) || \
+ ((CALIBRATIONRATE) == HRTIM_CALIBRATIONRATE_910) || \
+ ((CALIBRATIONRATE) == HRTIM_CALIBRATIONRATE_114) || \
+ ((CALIBRATIONRATE) == HRTIM_CALIBRATIONRATE_14))
+/**
+ * @}
+ */
+
+/** @defgroup Burst_DMA_Registers_Update
+ * @{
+ * @brief Constants defining the registers that can be written during a burst
+ * DMA operation
+ */
+#define HRTIM_BURSTDMA_NONE (uint32_t)0x00000000 /*!< No register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CR (HRTIM_BDTUPR_TIMCR) /*!< MCR or TIMxCR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_ICR (HRTIM_BDTUPR_TIMICR) /*!< MICR or TIMxICR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_DIER (HRTIM_BDTUPR_TIMDIER) /*!< MDIER or TIMxDIER register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CNT (HRTIM_BDTUPR_TIMCNT) /*!< MCNTR or CNTxCR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_PER (HRTIM_BDTUPR_TIMPER) /*!< MPER or PERxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_REP (HRTIM_BDTUPR_TIMREP) /*!< MREPR or REPxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CMP1 (HRTIM_BDTUPR_TIMCMP1) /*!< MCMP1R or CMP1xR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CMP2 (HRTIM_BDTUPR_TIMCMP2) /*!< MCMP2R or CMP2xR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CMP3 (HRTIM_BDTUPR_TIMCMP3) /*!< MCMP3R or CMP3xR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CMP4 (HRTIM_BDTUPR_TIMCMP4) /*!< MCMP4R or CMP4xR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_DTR (HRTIM_BDTUPR_TIMDTR) /*!< TDxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_SET1R (HRTIM_BDTUPR_TIMSET1R) /*!< SET1R register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_RST1R (HRTIM_BDTUPR_TIMRST1R) /*!< RST1R register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_SET2R (HRTIM_BDTUPR_TIMSET2R) /*!< SET2R register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_RST2R (HRTIM_BDTUPR_TIMRST2R) /*!< RST1R register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_EEFR1 (HRTIM_BDTUPR_TIMEEFR1) /*!< EEFxR1 register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_EEFR2 (HRTIM_BDTUPR_TIMEEFR2) /*!< EEFxR2 register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_RSTR (HRTIM_BDTUPR_TIMRSTR) /*!< RSTxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CHPR (HRTIM_BDTUPR_TIMCHPR) /*!< CHPxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_OUTR (HRTIM_BDTUPR_TIMOUTR) /*!< OUTxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_FLTR (HRTIM_BDTUPR_TIMFLTR) /*!< FLTxR register is updated by Burst DMA accesses */
+
+#define IS_HRTIM_TIMER_BURSTDMA(TIMER, BURSTDMA) \
+ ((((TIMER) == HRTIM_TIMERINDEX_MASTER) && (((BURSTDMA) & 0xFFFFFC000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_A) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_B) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_C) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_D) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_E) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)))
+/**
+ * @}
+ */
+
+/** @defgroup Burst_Mode_Control
+ * @{
+ * @brief Constants used to enable or disable the burst mode controller
+ */
+#define HRTIM_BURSTMODECTL_DISABLED (uint32_t)0x00000000 /*!< Burst mode disabled */
+#define HRTIM_BURSTMODECTL_ENABLED (HRTIM_BMCR_BME) /*!< Burst mode enabled */
+
+#define IS_HRTIM_BURSTMODECTL(BURSTMODECTL)\
+ (((BURSTMODECTL) == HRTIM_BURSTMODECTL_DISABLED) || \
+ ((BURSTMODECTL) == HRTIM_BURSTMODECTL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup Fault_Mode_Control
+ * @{
+ * @brief Constants used to enable or disable a fault channel
+ */
+#define HRTIM_FAULTMODECTL_DISABLED (uint32_t)0x00000000 /*!< Fault channel is disabled */
+#define HRTIM_FAULTMODECTL_ENABLED (uint32_t)0x00000001 /*!< Fault channel is enabled */
+
+#define IS_HRTIM_FAULTMODECTL(FAULTMODECTL)\
+ (((FAULTMODECTL) == HRTIM_FAULTMODECTL_DISABLED) || \
+ ((FAULTMODECTL) == HRTIM_FAULTMODECTL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup Software_Timer_Update
+ * @{
+ * @brief Constants used to force timer registers update
+ */
+#define HRTIM_TIMERUPDATE_MASTER (HRTIM_CR2_MSWU) /*!< Forces an immediate transfer from the preload to the active register in the master timer */
+#define HRTIM_TIMERUPDATE_A (HRTIM_CR2_TASWU) /*!< Forces an immediate transfer from the preload to the active register in the timer A */
+#define HRTIM_TIMERUPDATE_B (HRTIM_CR2_TBSWU) /*!< Forces an immediate transfer from the preload to the active register in the timer B */
+#define HRTIM_TIMERUPDATE_C (HRTIM_CR2_TCSWU) /*!< Forces an immediate transfer from the preload to the active register in the timer C */
+#define HRTIM_TIMERUPDATE_D (HRTIM_CR2_TDSWU) /*!< Forces an immediate transfer from the preload to the active register in the timer D */
+#define HRTIM_TIMERUPDATE_E (HRTIM_CR2_TESWU) /*!< Forces an immediate transfer from the preload to the active register in the timer E */
+
+#define IS_HRTIM_TIMERUPDATE(TIMERUPDATE) (((TIMERUPDATE) & 0xFFFFFFC0) == 0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup Software_Timer_Reset
+ * @{
+ * @brief Constants used to force timer counter reset
+ */
+#define HRTIM_TIMERRESET_MASTER (HRTIM_CR2_MRST) /*!< Resets the master timer counter */
+#define HRTIM_TIMERRESET_TIMER_A (HRTIM_CR2_TARST) /*!< Resets the timer A counter */
+#define HRTIM_TIMERRESET_TIMER_B (HRTIM_CR2_TBRST) /*!< Resets the timer B counter */
+#define HRTIM_TIMERRESET_TIMER_C (HRTIM_CR2_TCRST) /*!< Resets the timer C counter */
+#define HRTIM_TIMERRESET_TIMER_D (HRTIM_CR2_TDRST) /*!< Resets the timer D counter */
+#define HRTIM_TIMERRESET_TIMER_E (HRTIM_CR2_TERST) /*!< Resets the timer E counter */
+
+#define IS_HRTIM_TIMERRESET(TIMERRESET) (((TIMERRESET) & 0xFFFFC0FF) == 0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup Output_Level
+ * @{
+ * @brief Constants defining the level of a timer output
+ */
+#define HRTIM_OUTPUTLEVEL_ACTIVE (uint32_t)0x00000001 /*!< Forces the output to its active state */
+#define HRTIM_OUTPUTLEVEL_INACTIVE (uint32_t)0x00000002 /*!< Forces the output to its inactive state */
+
+#define IS_HRTIM_OUTPUTLEVEL(OUTPUTLEVEL)\
+ (((OUTPUTLEVEL) == HRTIM_OUTPUTLEVEL_ACTIVE) || \
+ ((OUTPUTLEVEL) == HRTIM_OUTPUTLEVEL_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup Output_State
+ * @{
+ * @brief Constants defining the state of a timer output
+ */
+#define HRTIM_OUTPUTSTATE_IDLE (uint32_t)0x00000001 /*!< Main operating mode, where the output can take the active or
+ inactive level as programmed in the crossbar unit */
+#define HRTIM_OUTPUTSTATE_RUN (uint32_t)0x00000002 /*!< Default operating state (e.g. after an HRTIM reset, when the
+ outputs are disabled by software or during a burst mode operation */
+#define HRTIM_OUTPUTSTATE_FAULT (uint32_t)0x00000003 /*!< Safety state, entered in case of a shut-down request on
+ FAULTx inputs */
+/**
+ * @}
+ */
+
+/** @defgroup Burst_Mode_Status
+ * @{
+ * @brief Constants defining the operating state of the burst mode controller
+ */
+#define HRTIM_BURSTMODESTATUS_NORMAL (uint32_t) 0x00000000 /*!< Normal operation */
+#define HRTIM_BURSTMODESTATUS_ONGOING (HRTIM_BMCR_BMSTAT) /*!< Burst operation on-going */
+/**
+ * @}
+ */
+
+/** @defgroup Current_Push_Pull_Status
+ * @{
+ * @brief Constants defining on which output the signal is currently applied
+ * in push-pull mode
+ */
+#define HRTIM_PUSHPULL_CURRENTSTATUS_OUTPUT1 (uint32_t) 0x00000000 /*!< Signal applied on output 1 and output 2 forced inactive */
+#define HRTIM_PUSHPULL_CURRENTSTATUS_OUTPUT2 (HRTIM_TIMISR_CPPSTAT) /*!< Signal applied on output 2 and output 1 forced inactive */
+/**
+ * @}
+ */
+
+/** @defgroup Idle_Push_Pull_Status
+ * @{
+ * @brief Constants defining on which output the signal was applied, in
+ * push-pull mode balanced fault mode or delayed idle mode, when the
+ * protection was triggered
+ */
+#define HRTIM_PUSHPULL_IDLESTATUS_OUTPUT1 (uint32_t) 0x00000000 /*!< Protection occurred when the output 1 was active and output 2 forced inactive */
+#define HRTIM_PUSHPULL_IDLESTATUS_OUTPUT2 (HRTIM_TIMISR_IPPSTAT) /*!< Protection occurred when the output 2 was active and output 1 forced inactive */
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Common_Interrupt_Enable
+ * @{
+ */
+#define HRTIM_IT_NONE (uint32_t)0x00000000 /*!< No interrupt enabled */
+#define HRTIM_IT_FLT1 HRTIM_IER_FLT1 /*!< Fault 1 interrupt enable */
+#define HRTIM_IT_FLT2 HRTIM_IER_FLT2 /*!< Fault 2 interrupt enable */
+#define HRTIM_IT_FLT3 HRTIM_IER_FLT3 /*!< Fault 3 interrupt enable */
+#define HRTIM_IT_FLT4 HRTIM_IER_FLT4 /*!< Fault 4 interrupt enable */
+#define HRTIM_IT_FLT5 HRTIM_IER_FLT5 /*!< Fault 5 interrupt enable */
+#define HRTIM_IT_SYSFLT HRTIM_IER_SYSFLT /*!< System Fault interrupt enable */
+#define HRTIM_IT_DLLRDY HRTIM_IER_DLLRDY /*!< DLL ready interrupt enable */
+#define HRTIM_IT_BMPER HRTIM_IER_BMPER /*!< Burst mode period interrupt enable */
+
+#define IS_HRTIM_IT(IT) (((IT) & 0xFFFCFFC0) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Master_Interrupt_Enable
+ * @{
+ */
+#define HRTIM_MASTER_IT_NONE (uint32_t)0x00000000 /*!< No interrupt enabled */
+#define HRTIM_MASTER_IT_MCMP1 HRTIM_MDIER_MCMP1IE /*!< Master compare 1 interrupt enable */
+#define HRTIM_MASTER_IT_MCMP2 HRTIM_MDIER_MCMP2IE /*!< Master compare 2 interrupt enable */
+#define HRTIM_MASTER_IT_MCMP3 HRTIM_MDIER_MCMP3IE /*!< Master compare 3 interrupt enable */
+#define HRTIM_MASTER_IT_MCMP4 HRTIM_MDIER_MCMP4IE /*!< Master compare 4 interrupt enable */
+#define HRTIM_MASTER_IT_MREP HRTIM_MDIER_MREPIE /*!< Master Repetition interrupt enable */
+#define HRTIM_MASTER_IT_SYNC HRTIM_MDIER_SYNCIE /*!< Synchronization input interrupt enable */
+#define HRTIM_MASTER_IT_MUPD HRTIM_MDIER_MUPDIE /*!< Master update interrupt enable */
+
+#define IS_HRTIM_MASTER_IT(MASTER_IT) (((MASTER_IT) & 0xFFFFFF80) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timing_Unit_Interrupt_Enable
+ * @{
+ */
+#define HRTIM_TIM_IT_NONE (uint32_t)0x00000000 /*!< No interrupt enabled */
+#define HRTIM_TIM_IT_CMP1 HRTIM_TIMDIER_CMP1IE /*!< Timer compare 1 interrupt enable */
+#define HRTIM_TIM_IT_CMP2 HRTIM_TIMDIER_CMP2IE /*!< Timer compare 2 interrupt enable */
+#define HRTIM_TIM_IT_CMP3 HRTIM_TIMDIER_CMP3IE /*!< Timer compare 3 interrupt enable */
+#define HRTIM_TIM_IT_CMP4 HRTIM_TIMDIER_CMP4IE /*!< Timer compare 4 interrupt enable */
+#define HRTIM_TIM_IT_REP HRTIM_TIMDIER_REPIE /*!< Timer repetition interrupt enable */
+#define HRTIM_TIM_IT_UPD HRTIM_TIMDIER_UPDIE /*!< Timer update interrupt enable */
+#define HRTIM_TIM_IT_CPT1 HRTIM_TIMDIER_CPT1IE /*!< Timer capture 1 interrupt enable */
+#define HRTIM_TIM_IT_CPT2 HRTIM_TIMDIER_CPT2IE /*!< Timer capture 2 interrupt enable */
+#define HRTIM_TIM_IT_SET1 HRTIM_TIMDIER_SET1IE /*!< Timer output 1 set interrupt enable */
+#define HRTIM_TIM_IT_RST1 HRTIM_TIMDIER_RST1IE /*!< Timer output 1 reset interrupt enable */
+#define HRTIM_TIM_IT_SET2 HRTIM_TIMDIER_SET2IE /*!< Timer output 2 set interrupt enable */
+#define HRTIM_TIM_IT_RST2 HRTIM_TIMDIER_RST2IE /*!< Timer output 2 reset interrupt enable */
+#define HRTIM_TIM_IT_RST HRTIM_TIMDIER_RSTIE /*!< Timer reset interrupt enable */
+#define HRTIM_TIM_IT_DLYPRT HRTIM_TIMDIER_DLYPRTIE /*!< Timer delay protection interrupt enable */
+
+#define IS_HRTIM_TIM_IT(IS_HRTIM_TIM_IT) (((IS_HRTIM_TIM_IT) & 0xFFFF8020) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Common_Interrupt_Flag
+ * @{
+ */
+#define HRTIM_FLAG_FLT1 HRTIM_ISR_FLT1 /*!< Fault 1 interrupt flag */
+#define HRTIM_FLAG_FLT2 HRTIM_ISR_FLT2 /*!< Fault 2 interrupt flag */
+#define HRTIM_FLAG_FLT3 HRTIM_ISR_FLT3 /*!< Fault 3 interrupt flag */
+#define HRTIM_FLAG_FLT4 HRTIM_ISR_FLT4 /*!< Fault 4 interrupt flag */
+#define HRTIM_FLAG_FLT5 HRTIM_ISR_FLT5 /*!< Fault 5 interrupt flag */
+#define HRTIM_FLAG_SYSFLT HRTIM_ISR_SYSFLT /*!< System Fault interrupt flag */
+#define HRTIM_FLAG_DLLRDY HRTIM_ISR_DLLRDY /*!< DLL ready interrupt flag */
+#define HRTIM_FLAG_BMPER HRTIM_ISR_BMPER /*!< Burst mode period interrupt flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Master_Interrupt_Flag
+ * @{
+ */
+#define HRTIM_MASTER_FLAG_MCMP1 HRTIM_MISR_MCMP1 /*!< Master compare 1 interrupt flag */
+#define HRTIM_MASTER_FLAG_MCMP2 HRTIM_MISR_MCMP2 /*!< Master compare 2 interrupt flag */
+#define HRTIM_MASTER_FLAG_MCMP3 HRTIM_MISR_MCMP3 /*!< Master compare 3 interrupt flag */
+#define HRTIM_MASTER_FLAG_MCMP4 HRTIM_MISR_MCMP4 /*!< Master compare 4 interrupt flag */
+#define HRTIM_MASTER_FLAG_MREP HRTIM_MISR_MREP /*!< Master Repetition interrupt flag */
+#define HRTIM_MASTER_FLAG_SYNC HRTIM_MISR_SYNC /*!< Synchronization input interrupt flag */
+#define HRTIM_MASTER_FLAG_MUPD HRTIM_MISR_MUPD /*!< Master update interrupt flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timing_Unit_Interrupt_Flag
+ * @{
+ */
+#define HRTIM_TIM_FLAG_CMP1 HRTIM_TIMISR_CMP1 /*!< Timer compare 1 interrupt flag */
+#define HRTIM_TIM_FLAG_CMP2 HRTIM_TIMISR_CMP2 /*!< Timer compare 2 interrupt flag */
+#define HRTIM_TIM_FLAG_CMP3 HRTIM_TIMISR_CMP3 /*!< Timer compare 3 interrupt flag */
+#define HRTIM_TIM_FLAG_CMP4 HRTIM_TIMISR_CMP4 /*!< Timer compare 4 interrupt flag */
+#define HRTIM_TIM_FLAG_REP HRTIM_TIMISR_REP /*!< Timer repetition interrupt flag */
+#define HRTIM_TIM_FLAG_UPD HRTIM_TIMISR_UPD /*!< Timer update interrupt flag */
+#define HRTIM_TIM_FLAG_CPT1 HRTIM_TIMISR_CPT1 /*!< Timer capture 1 interrupt flag */
+#define HRTIM_TIM_FLAG_CPT2 HRTIM_TIMISR_CPT2 /*!< Timer capture 2 interrupt flag */
+#define HRTIM_TIM_FLAG_SET1 HRTIM_TIMISR_SET1 /*!< Timer output 1 set interrupt flag */
+#define HRTIM_TIM_FLAG_RST1 HRTIM_TIMISR_RST1 /*!< Timer output 1 reset interrupt flag */
+#define HRTIM_TIM_FLAG_SET2 HRTIM_TIMISR_SET2 /*!< Timer output 2 set interrupt flag */
+#define HRTIM_TIM_FLAG_RST2 HRTIM_TIMISR_RST2 /*!< Timer output 2 reset interrupt flag */
+#define HRTIM_TIM_FLAG_RST HRTIM_TIMISR_RST /*!< Timer reset interrupt flag */
+#define HRTIM_TIM_FLAG_DLYPRT HRTIM_TIMISR_DLYPRT /*!< Timer delay protection interrupt flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Master_DMA_Request_Enable
+ * @{
+ */
+#define HRTIM_MASTER_DMA_NONE (uint32_t)0x00000000 /*!< No DMA request enable */
+#define HRTIM_MASTER_DMA_MCMP1 HRTIM_MDIER_MCMP1DE /*!< Master compare 1 DMA request enable */
+#define HRTIM_MASTER_DMA_MCMP2 HRTIM_MDIER_MCMP2DE /*!< Master compare 2 DMA request enable */
+#define HRTIM_MASTER_DMA_MCMP3 HRTIM_MDIER_MCMP3DE /*!< Master compare 3 DMA request enable */
+#define HRTIM_MASTER_DMA_MCMP4 HRTIM_MDIER_MCMP4DE /*!< Master compare 4 DMA request enable */
+#define HRTIM_MASTER_DMA_MREP HRTIM_MDIER_MREPDE /*!< Master Repetition DMA request enable */
+#define HRTIM_MASTER_DMA_SYNC HRTIM_MDIER_SYNCDE /*!< Synchronization input DMA request enable */
+#define HRTIM_MASTER_DMA_MUPD HRTIM_MDIER_MUPDDE /*!< Master update DMA request enable */
+
+#define IS_HRTIM_MASTER_DMA(MASTER_DMA) (((MASTER_DMA) & 0xFF80FFFF) == 0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timing_Unit_DMA_Request_Enable
+ * @{
+ */
+#define HRTIM_TIM_DMA_NONE (uint32_t)0x00000000 /*!< No DMA request enable */
+#define HRTIM_TIM_DMA_CMP1 HRTIM_TIMDIER_CMP1DE /*!< Timer compare 1 DMA request enable */
+#define HRTIM_TIM_DMA_CMP2 HRTIM_TIMDIER_CMP2DE /*!< Timer compare 2 DMA request enable */
+#define HRTIM_TIM_DMA_CMP3 HRTIM_TIMDIER_CMP3DE /*!< Timer compare 3 DMA request enable */
+#define HRTIM_TIM_DMA_CMP4 HRTIM_TIMDIER_CMP4DE /*!< Timer compare 4 DMA request enable */
+#define HRTIM_TIM_DMA_REP HRTIM_TIMDIER_REPDE /*!< Timer repetition DMA request enable */
+#define HRTIM_TIM_DMA_UPD HRTIM_TIMDIER_UPDDE /*!< Timer update DMA request enable */
+#define HRTIM_TIM_DMA_CPT1 HRTIM_TIMDIER_CPT1DE /*!< Timer capture 1 DMA request enable */
+#define HRTIM_TIM_DMA_CPT2 HRTIM_TIMDIER_CPT2DE /*!< Timer capture 2 DMA request enable */
+#define HRTIM_TIM_DMA_SET1 HRTIM_TIMDIER_SET1DE /*!< Timer output 1 set DMA request enable */
+#define HRTIM_TIM_DMA_RST1 HRTIM_TIMDIER_RST1DE /*!< Timer output 1 reset DMA request enable */
+#define HRTIM_TIM_DMA_SET2 HRTIM_TIMDIER_SET2DE /*!< Timer output 2 set DMA request enable */
+#define HRTIM_TIM_DMA_RST2 HRTIM_TIMDIER_RST2DE /*!< Timer output 2 reset DMA request enable */
+#define HRTIM_TIM_DMA_RST HRTIM_TIMDIER_RSTDE /*!< Timer reset DMA request enable */
+#define HRTIM_TIM_DMA_DLYPRT HRTIM_TIMDIER_DLYPRTDE /*!< Timer delay protection DMA request enable */
+
+#define IS_HRTIM_TIM_DMA(TIM_DMA) (((TIM_DMA) & 0x8020FFFF) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Instance_definition
+ * @{
+ */
+#define IS_HRTIM_INSTANCE(INSTANCE) (INSTANCE) == HRTIM1)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset HRTIM handle state
+ * @param __HANDLE__: HRTIM handle.
+ * @retval None
+ */
+#define __HAL_HRTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HRTIM_STATE_RESET)
+
+/** @brief Enables or disables the timer counter(s)
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMERS__: timersto enable/disable
+ * This parameter can be any combinations of the following values:
+ * @arg HRTIM_TIMERID_MASTER: Master timer identifier
+ * @arg HRTIM_TIMERID_TIMER_A: Timer A identifier
+ * @arg HRTIM_TIMERID_TIMER_B: Timer B identifier
+ * @arg HRTIM_TIMERID_TIMER_C: Timer C identifier
+ * @arg HRTIM_TIMERID_TIMER_D: Timer D identifier
+ * @arg HRTIM_TIMERID_TIMER_E: Timer E identifier
+ * @retval None
+ */
+#define __HAL_HRTIM_ENABLE(__HANDLE__, __TIMERS__) ((__HANDLE__)->Instance->sMasterRegs.MCR |= (__TIMERS__))
+
+/* The counter of a timing unit is disabled only if all the timer outputs */
+/* are disabled and no capture is configured */
+#define HRTIM_TAOEN_MASK (HRTIM_OENR_TA2OEN | HRTIM_OENR_TA1OEN)
+#define HRTIM_TBOEN_MASK (HRTIM_OENR_TB2OEN | HRTIM_OENR_TB1OEN)
+#define HRTIM_TCOEN_MASK (HRTIM_OENR_TC2OEN | HRTIM_OENR_TC1OEN)
+#define HRTIM_TDOEN_MASK (HRTIM_OENR_TD2OEN | HRTIM_OENR_TD1OEN)
+#define HRTIM_TEOEN_MASK (HRTIM_OENR_TE2OEN | HRTIM_OENR_TE1OEN)
+#define __HAL_HRTIM_DISABLE(__HANDLE__, __TIMERS__)\
+ do {\
+ if (((__TIMERS__) & HRTIM_TIMERID_MASTER) == HRTIM_TIMERID_MASTER)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_MASTER);\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_A) == HRTIM_TIMERID_TIMER_A)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TAOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_A);\
+ }\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_B) == HRTIM_TIMERID_TIMER_B)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TBOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_B);\
+ }\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_C) == HRTIM_TIMERID_TIMER_C)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TCOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_C);\
+ }\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_D) == HRTIM_TIMERID_TIMER_D)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TDOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_D);\
+ }\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_E) == HRTIM_TIMERID_TIMER_E)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TEOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_E);\
+ }\
+ }\
+ } while(0)
+
+/** @brief Enables or disables the specified HRTIM common interrupts.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_IT_FLT1: Fault 1 interrupt enable
+ * @arg HRTIM_IT_FLT2: Fault 2 interrupt enable
+ * @arg HRTIM_IT_FLT3: Fault 3 interrupt enable
+ * @arg HRTIM_IT_FLT4: Fault 4 interrupt enable
+ * @arg HRTIM_IT_FLT5: Fault 5 interrupt enable
+ * @arg HRTIM_IT_SYSFLT: System Fault interrupt enable
+ * @arg HRTIM_IT_DLLRDY: DLL ready interrupt enable
+ * @arg HRTIM_IT_BMPER: Burst mode period interrupt enable
+ * @retval None
+ */
+#define __HAL_HRTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.IER |= (__INTERRUPT__))
+#define __HAL_HRTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.IER &= ~(__INTERRUPT__))
+
+/** @brief Enables or disables the specified HRTIM Master timer interrupts.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP4: Master compare 4 interrupt enable
+ * @arg HRTIM_MASTER_IT_MREP: Master Repetition interrupt enable
+ * @arg HRTIM_MASTER_IT_SYNC: Synchronization input interrupt enable
+ * @arg HRTIM_MASTER_IT_MUPD: Master update interrupt enable
+ * @retval None
+ */
+#define __HAL_HRTIM_MASTER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sMasterRegs.MDIER |= (__INTERRUPT__))
+#define __HAL_HRTIM_MASTER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sMasterRegs.MDIER &= ~(__INTERRUPT__))
+
+/** @brief Enables or disables the specified HRTIM Timerx interrupts.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMER__: specified the timing unit (Timer A to E)
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_TIM_IT_CMP1: Timer compare 1 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP2: Timer compare 2 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP3: Timer compare 3 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP4: Timer compare 4 interrupt enable
+ * @arg HRTIM_TIM_IT_REP: Timer repetition interrupt enable
+ * @arg HRTIM_TIM_IT_UPD: Timer update interrupt enable
+ * @arg HRTIM_TIM_IT_CPT1: Timer capture 1 interrupt enable
+ * @arg HRTIM_TIM_IT_CPT2: Timer capture 2 interrupt enable
+ * @arg HRTIM_TIM_IT_SET1: Timer output 1 set interrupt enable
+ * @arg HRTIM_TIM_IT_RST1: Timer output 1 reset interrupt enable
+ * @arg HRTIM_TIM_IT_SET2: Timer output 2 set interrupt enable
+ * @arg HRTIM_TIM_IT_RST2: Timer output 2 reset interrupt enable
+ * @arg HRTIM_TIM_IT_RST: Timer reset interrupt enable
+ * @arg HRTIM_TIM_IT_DLYPRT: Timer delay protection interrupt enable
+ * @retval None
+ */
+#define __HAL_HRTIM_TIMER_ENABLE_IT(__HANDLE__, __TIMER__, __INTERRUPT__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER |= (__INTERRUPT__))
+#define __HAL_HRTIM_TIMER_DISABLE_IT(__HANDLE__, __TIMER__, __INTERRUPT__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified HRTIM common interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_IT_FLT1: Fault 1 interrupt enable
+ * @arg HRTIM_IT_FLT2: Fault 2 interrupt enable
+ * @arg HRTIM_IT_FLT3: Fault 3 enable
+ * @arg HRTIM_IT_FLT4: Fault 4 enable
+ * @arg HRTIM_IT_FLT5: Fault 5 enable
+ * @arg HRTIM_IT_SYSFLT: System Fault interrupt enable
+ * @arg HRTIM_IT_DLLRDY: DLL ready interrupt enable
+ * @arg HRTIM_IT_BMPER: Burst mode period interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_HRTIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->sCommonRegs.IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks if the specified HRTIM Master interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP4: Master compare 4 interrupt enable
+ * @arg HRTIM_MASTER_IT_MREP: Master Repetition interrupt enable
+ * @arg HRTIM_MASTER_IT_SYNC: Synchronization input interrupt enable
+ * @arg HRTIM_MASTER_IT_MUPD: Master update interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_HRTIM_MASTER_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->sMasterRegs.MDIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks if the specified HRTIM Timerx interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMER__: specified the timing unit (Timer A to E)
+ * @param __INTERRUPT__: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP4: Master compare 4 interrupt enable
+ * @arg HRTIM_MASTER_IT_MREP: Master Repetition interrupt enable
+ * @arg HRTIM_MASTER_IT_SYNC: Synchronization input interrupt enable
+ * @arg HRTIM_MASTER_IT_MUPD: Master update interrupt enable
+ * @arg HRTIM_TIM_IT_CMP1: Timer compare 1 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP2: Timer compare 2 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP3: Timer compare 3 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP4: Timer compare 4 interrupt enable
+ * @arg HRTIM_TIM_IT_REP: Timer repetition interrupt enable
+ * @arg HRTIM_TIM_IT_UPD: Timer update interrupt enable
+ * @arg HRTIM_TIM_IT_CPT1: Timer capture 1 interrupt enable
+ * @arg HRTIM_TIM_IT_CPT2: Timer capture 2 interrupt enable
+ * @arg HRTIM_TIM_IT_SET1: Timer output 1 set interrupt enable
+ * @arg HRTIM_TIM_IT_RST1: Timer output 1 reset interrupt enable
+ * @arg HRTIM_TIM_IT_SET2: Timer output 2 set interrupt enable
+ * @arg HRTIM_TIM_IT_RST2: Timer output 2 reset interrupt enable
+ * @arg HRTIM_TIM_IT_RST: Timer reset interrupt enable
+ * @arg HRTIM_TIM_IT_DLYPRT: Timer delay protection interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_HRTIM_TIMER_GET_ITSTATUS(__HANDLE__, __TIMER__, __INTERRUPT__) ((((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Clears the specified HRTIM common pending flag.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_IT_FLT1: Fault 1 interrupt clear flag
+ * @arg HRTIM_IT_FLT2: Fault 2 interrupt clear flag
+ * @arg HRTIM_IT_FLT3: Fault 3 clear flag
+ * @arg HRTIM_IT_FLT4: Fault 4 clear flag
+ * @arg HRTIM_IT_FLT5: Fault 5 clear flag
+ * @arg HRTIM_IT_SYSFLT: System Fault interrupt clear flag
+ * @arg HRTIM_IT_DLLRDY: DLL ready interrupt clear flag
+ * @arg HRTIM_IT_BMPER: Burst mode period interrupt clear flag
+ * @retval None
+ */
+#define __HAL_HRTIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.ICR = (__INTERRUPT__))
+
+/** @brief Clears the specified HRTIM Master pending flag.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MCMP4: Master compare 4 interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MREP: Master Repetition interrupt clear flag
+ * @arg HRTIM_MASTER_IT_SYNC: Synchronization input interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MUPD: Master update interrupt clear flag
+ * @retval None
+ */
+#define __HAL_HRTIM_MASTER_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sMasterRegs.MICR = (__INTERRUPT__))
+
+/** @brief Clears the specified HRTIM Timerx pending flag.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMER__: specified the timing unit (Timer A to E)
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_TIM_IT_CMP1: Timer compare 1 interrupt clear flag
+ * @arg HRTIM_TIM_IT_CMP2: Timer compare 2 interrupt clear flag
+ * @arg HRTIM_TIM_IT_CMP3: Timer compare 3 interrupt clear flag
+ * @arg HRTIM_TIM_IT_CMP4: Timer compare 4 interrupt clear flag
+ * @arg HRTIM_TIM_IT_REP: Timer repetition interrupt clear flag
+ * @arg HRTIM_TIM_IT_UPD: Timer update interrupt clear flag
+ * @arg HRTIM_TIM_IT_CPT1: Timer capture 1 interrupt clear flag
+ * @arg HRTIM_TIM_IT_CPT2: Timer capture 2 interrupt clear flag
+ * @arg HRTIM_TIM_IT_SET1: Timer output 1 set interrupt clear flag
+ * @arg HRTIM_TIM_IT_RST1: Timer output 1 reset interrupt clear flag
+ * @arg HRTIM_TIM_IT_SET2: Timer output 2 set interrupt clear flag
+ * @arg HRTIM_TIM_IT_RST2: Timer output 2 reset interrupt clear flag
+ * @arg HRTIM_TIM_IT_RST: Timer reset interrupt clear flag
+ * @arg HRTIM_TIM_IT_DLYPRT: Timer output 1 delay protection interrupt clear flag
+ * @retval None
+ */
+#define __HAL_HRTIM_TIMER_CLEAR_IT(__HANDLE__, __TIMER__, __INTERRUPT__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxICR = (__INTERRUPT__))
+
+/* DMA HANDLING */
+/** @brief Enables or disables the specified HRTIM common interrupts.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_IT_FLT1: Fault 1 interrupt enable
+ * @arg HRTIM_IT_FLT2: Fault 2 interrupt enable
+ * @arg HRTIM_IT_FLT3: Fault 3 interrupt enable
+ * @arg HRTIM_IT_FLT4: Fault 4 interrupt enable
+ * @arg HRTIM_IT_FLT5: Fault 5 interrupt enable
+ * @arg HRTIM_IT_SYSFLT: System Fault interrupt enable
+ * @arg HRTIM_IT_DLLRDY: DLL ready interrupt enable
+ * @arg HRTIM_IT_BMPER: Burst mode period interrupt enable
+ * @retval None
+ */
+#define __HAL_HRTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.IER |= (__INTERRUPT__))
+#define __HAL_HRTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.IER &= ~(__INTERRUPT__))
+
+/** @brief Enables or disables the specified HRTIM Master timer DMA requets.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __DMA__: specifies the DMA request to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_DMA_MCMP1: Master compare 1 DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MCMP2: Master compare 2 DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MCMP3: Master compare 3 DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MCMP4: Master compare 4 DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MREP: Master Repetition DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_SYNC: Synchronization input DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MUPD: Master update DMA resquest enable
+ * @retval None
+ */
+#define __HAL_HRTIM_MASTER_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->sMasterRegs.MDIER |= (__DMA__))
+#define __HAL_HRTIM_MASTER_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->sMasterRegs.MDIER &= ~(__DMA__))
+
+/** @brief Enables or disables the specified HRTIM Timerx DMA requests.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMER__: specified the timing unit (Timer A to E)
+ * @param __DMA__: specifies the DMA request to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_TIM_DMA_CMP1: Timer compare 1 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CMP2: Timer compare 2 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CMP3: Timer compare 3 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CMP4: Timer compare 4 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_REP: Timer repetition DMA resquest enable
+ * @arg HRTIM_TIM_DMA_UPD: Timer update DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CPT1: Timer capture 1 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CPT2: Timer capture 2 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_SET1: Timer output 1 set DMA resquest enable
+ * @arg HRTIM_TIM_DMA_RST1: Timer output 1 reset DMA resquest enable
+ * @arg HRTIM_TIM_DMA_SET2: Timer output 2 set DMA resquest enable
+ * @arg HRTIM_TIM_DMA_RST2: Timer output 2 reset DMA resquest enable
+ * @arg HRTIM_TIM_DMA_RST: Timer reset DMA resquest enable
+ * @arg HRTIM_TIM_DMA_DLYPRT: Timer delay protection DMA resquest enable
+ * @retval None
+ */
+#define __HAL_HRTIM_TIMER_ENABLE_DMA(__HANDLE__, __TIMER__, __DMA__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER |= (__DMA__))
+#define __HAL_HRTIM_TIMER_DISABLE_DMA(__HANDLE__, __TIMER__, __DMA__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER &= ~(__DMA__))
+
+#define __HAL_HRTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->sCommonRegs.ISR & (__FLAG__)) == (__FLAG__))
+#define __HAL_HRTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->sCommonRegs.ICR = (__FLAG__))
+
+#define __HAL_HRTIM_MASTER_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->sMasterRegs.MISR & (__FLAG__)) == (__FLAG__))
+#define __HAL_HRTIM_MASTER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->sMasterRegs.MICR = (__FLAG__))
+
+#define __HAL_HRTIM_TIMER_GET_FLAG(__HANDLE__, __TIMER__, __FLAG__) (((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxISR & (__FLAG__)) == (__FLAG__))
+#define __HAL_HRTIM_TIMER_CLEAR_FLAG(__HANDLE__, __TIMER__, __FLAG__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxICR = (__FLAG__))
+
+/** @brief Sets the HRTIM timer Counter Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __COUNTER__: specifies the Counter Register new value.
+ * @retval None
+ */
+#define __HAL_HRTIM_SetCounter(__HANDLE__, __TIMER__, __COUNTER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MCNTR = (__COUNTER__)) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CNTxR = (__COUNTER__)))
+
+/** @brief Gets the HRTIM timer Counter Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @retval HRTIM timer Counter Register value
+ */
+#define __HAL_HRTIM_GetCounter(__HANDLE__, __TIMER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MCNTR) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CNTxR))
+
+/** @brief Sets the HRTIM timer Period value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __PERIOD__: specifies the Period Register new value.
+ * @retval None
+ */
+#define __HAL_HRTIM_SetPeriod(__HANDLE__, __TIMER__, __PERIOD__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MPER = (__PERIOD__)) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].PERxR = (__PERIOD__)))
+
+/** @brief Gets the HRTIM timer Period Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @retval timer Period Register
+ */
+#define __HAL_HRTIM_GetPeriod(__HANDLE__, __TIMER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MPER) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].PERxR))
+
+/** @brief Sets the HRTIM timer clock prescaler value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __PRESCALER__: specifies the clock prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_PRESCALERRATIO_MUL32: fHRCK: 4.608 GHz - Resolution: 217 ps - Min PWM frequency: 70.3 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_MUL16: fHRCK: 2.304 GHz - Resolution: 434 ps - Min PWM frequency: 35.1 KHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_MUL8: fHRCK: 1.152 GHz - Resolution: 868 ps - Min PWM frequency: 17.6 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_MUL4: fHRCK: 576 MHz - Resolution: 1.73 ns - Min PWM frequency: 8.8 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_MUL2: fHRCK: 288 MHz - Resolution: 3.47 ns - Min PWM frequency: 4.4 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_DIV1: fHRCK: 144 MHz - Resolution: 6.95 ns - Min PWM frequency: 2.2 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_DIV2: fHRCK: 72 MHz - Resolution: 13.88 ns- Min PWM frequency: 1.1 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_DIV4: fHRCK: 36 MHz - Resolution: 27.7 ns- Min PWM frequency: 550Hz (fHRTIM=144MHz)
+ * @retval None
+ */
+#define __HAL_HRTIM_SetClockPrescaler(__HANDLE__, __TIMER__, __PRESCALER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MCR |= (__PRESCALER__)) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxCR |= (__PRESCALER__)))
+
+/** @brief Gets the HRTIM timer clock prescaler value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @retval timer clock prescaler value
+ */
+#define __HAL_HRTIM_GetClockPrescaler(__HANDLE__, __TIMER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MCR & HRTIM_MCR_CK_PSC) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxCR & HRTIM_TIMCR_CK_PSC))
+
+/** @brief Sets the HRTIM timer Compare Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __COMPAREUNIT__: timer compare unit
+ * This parameter can be one of the following values:
+ * @arg HRTIM_COMPAREUNIT_1: Compare unit 1
+ * @arg HRTIM_COMPAREUNIT_2: Compare unit 2
+ * @arg HRTIM_COMPAREUNIT_3: Compare unit 3
+ * @arg HRTIM_COMPAREUNIT_4: Compare unit 4
+ * @param __COMPARE__: specifies the Compare new value.
+ * @retval None
+ */
+#define __HAL_HRTIM_SetCompare(__HANDLE__, __TIMER__, __COMPAREUNIT__, __COMPARE__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? \
+ (((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_1) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP1R = (__COMPARE__)) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_2) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP2R = (__COMPARE__)) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_3) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP3R = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->sMasterRegs.MCMP4R = (__COMPARE__))) \
+ : \
+ (((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_1) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP1xR = (__COMPARE__)) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_2) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP2xR = (__COMPARE__)) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_3) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP3xR = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP4xR = (__COMPARE__))))
+
+/** @brief Gets the HRTIM timer Compare Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __COMPAREUNIT__: timer compare unit
+ * This parameter can be one of the following values:
+ * @arg HRTIM_COMPAREUNIT_1: Compare unit 1
+ * @arg HRTIM_COMPAREUNIT_2: Compare unit 2
+ * @arg HRTIM_COMPAREUNIT_3: Compare unit 3
+ * @arg HRTIM_COMPAREUNIT_4: Compare unit 4
+ * @retval Compare value
+ */
+#define __HAL_HRTIM_GetCompare(__HANDLE__, __TIMER__, __COMPAREUNIT__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? \
+ (((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_1) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP1R) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_2) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP2R) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_3) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP3R) :\
+ ((__HANDLE__)->Instance->sMasterRegs.MCMP4R)) \
+ : \
+ (((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_1) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP1xR) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_2) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP2xR) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_3) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP3xR) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP4xR)))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* HRTIM common functions *****************************************************/
+HAL_StatusTypeDef HAL_HRTIM_Init(HRTIM_HandleTypeDef *hhrtim);
+
+HAL_StatusTypeDef HAL_HRTIM_DeInit (HRTIM_HandleTypeDef *hhrtim);
+
+void HAL_HRTIM_MspInit(HRTIM_HandleTypeDef *hhrtim);
+
+void HAL_HRTIM_MspDeInit(HRTIM_HandleTypeDef *hhrtim);
+
+HAL_StatusTypeDef HAL_HRTIM_TimeBaseConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ HRTIM_TimeBaseCfgTypeDef * pTimeBaseCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_DLLCalibrationStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t CalibrationRate);
+
+HAL_StatusTypeDef HAL_HRTIM_DLLCalibrationStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t CalibrationRate);
+
+HAL_StatusTypeDef HAL_HRTIM_PollForDLLCalibration(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timeout);
+
+/* Simple time base related functions *****************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t SrcAddr,
+ uint32_t DestAddr,
+ uint32_t Length);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+/* Simple output compare related functions ************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCChannelConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel,
+ HRTIM_SimpleOCChannelCfgTypeDef* pSimpleOCChannelCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel,
+ uint32_t SrcAddr,
+ uint32_t DestAddr,
+ uint32_t Length);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+/* Simple PWM output related functions ****************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMChannelConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel,
+ HRTIM_SimplePWMChannelCfgTypeDef* pSimplePWMChannelCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel,
+ uint32_t SrcAddr,
+ uint32_t DestAddr,
+ uint32_t Length);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+/* Simple capture related functions *******************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureChannelConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel,
+ HRTIM_SimpleCaptureChannelCfgTypeDef* pSimpleCaptureChannelCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel,
+ uint32_t SrcAddr,
+ uint32_t DestAddr,
+ uint32_t Length);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+/* Simple one pulse related functions *****************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseChannelConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel,
+ HRTIM_SimpleOnePulseChannelCfgTypeDef* pSimpleOnePulseChannelCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel);
+
+/* Waveform related functions *************************************************/
+HAL_StatusTypeDef HAL_HRTIM_WaveformTimerConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ HRTIM_TimerCfgTypeDef * pTimerCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCompareConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CompareUnit,
+ HRTIM_CompareCfgTypeDef* pCompareCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCaptureConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureUnit,
+ HRTIM_CaptureCfgTypeDef* pCaptureCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformOutputConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output,
+ HRTIM_OutputCfgTypeDef * pOutputCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_TimerEventFilteringConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Event,
+ HRTIM_TimerEventFilteringCfgTypeDef * pTimerEventFilteringCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_DeadTimeConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ HRTIM_DeadTimeCfgTypeDef* pDeadTimeCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_ChopperModeConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ HRTIM_ChopperModeCfgTypeDef* pChopperModeCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstDMAConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t RegistersToUpdate);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstModeConfig(HRTIM_HandleTypeDef *hhrtim,
+ HRTIM_BurstModeCfgTypeDef* pBurstModeCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_EventConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Event,
+ HRTIM_EventCfgTypeDef* pEventCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_EventPrescalerConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Prescaler);
+
+HAL_StatusTypeDef HAL_HRTIM_FaultConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Fault,
+ HRTIM_FaultCfgTypeDef* pFaultCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_FaultPrescalerConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Prescaler);
+
+HAL_StatusTypeDef HAL_HRTIM_ADCTriggerConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t ADCTrigger,
+ HRTIM_ADCTriggerCfgTypeDef* pADCTriggerCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformOutputStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t OutputsToStart);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformOutputStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t OutputsToStop);
+
+/* IRQ handler */
+void HAL_HRTIM_IRQHandler(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstModeCtl(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Enable);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstModeSoftwareTrigger(HRTIM_HandleTypeDef *hhrtim);
+
+void HAL_HRTIM_FaultModeCtl(HRTIM_HandleTypeDef * hhrtim,
+ uint32_t Faults,
+ uint32_t Enable);
+
+HAL_StatusTypeDef HAL_HRTIM_SoftwareCapture(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureUnit);
+
+HAL_StatusTypeDef HAL_HRTIM_SoftwareUpdate(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_SoftwareReset(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_HRTIM_StateTypeDef HAL_HRTIM_GetState(HRTIM_HandleTypeDef* hhrtim);
+
+HAL_StatusTypeDef HAL_HRTIM_UpdateEnable(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_UpdateDisable(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstDMATransfer(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t BurstBufferAddress,
+ uint32_t BurstBufferLength);
+
+uint32_t HAL_HRTIM_GetCapturedValue(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureUnit);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformSetOutputLevel(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output,
+ uint32_t OutputLevel);
+
+uint32_t HAL_HRTIM_WaveformGetOutputLevel(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output);
+
+uint32_t HAL_HRTIM_WaveformGetOutputState(HRTIM_HandleTypeDef * hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output);
+
+uint32_t HAL_HRTIM_GetDelayedProtectionStatus(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output);
+
+uint32_t HAL_HRTIM_GetBurstStatus(HRTIM_HandleTypeDef *hhrtim);
+
+uint32_t HAL_HRTIM_GetCurrentPushPullStatus(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+uint32_t HAL_HRTIM_GetIdlePushPullStatus(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+/* HRTIM events related callback functions */
+void HAL_HRTIM_Fault1Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_Fault2Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_Fault3Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_Fault4Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_Fault5Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_SystemFaultCallback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_DLLCalbrationReadyCallback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_BurstModePeriodCallback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_SynchronizationEventCallback(HRTIM_HandleTypeDef *hhrtim);
+
+/* Timer events related callback functions */
+void HAL_HRTIM_RegistersUpdateCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_RepetitionEventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Compare1EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Compare2EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Compare3EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Compare4EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Capture1EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Capture2EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_DelayedProtectionCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_CounterResetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Output1SetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Output1ResetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Output2SetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Output2ResetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_BurstDMATransferCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_ErrorCallback(HRTIM_HandleTypeDef *hhrtim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F334x8) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_HRTIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_i2c.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,494 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2C_H
+#define __STM32F3xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief I2C Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */
+ HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */
+ HAL_I2C_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
+ HAL_I2C_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
+ HAL_I2C_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
+ HAL_I2C_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_TX = 0x52, /*!< Memory Data Transmission process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_RX = 0x62, /*!< Memory Data Reception process is ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @brief HAL I2C Error Code structure definition
+ */
+typedef enum
+{
+ HAL_I2C_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2C_ERROR_BERR = 0x01, /*!< BERR error */
+ HAL_I2C_ERROR_ARLO = 0x02, /*!< ARLO error */
+ HAL_I2C_ERROR_AF = 0x04, /*!< AF error */
+ HAL_I2C_ERROR_OVR = 0x08, /*!< OVR error */
+ HAL_I2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_I2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */
+ HAL_I2C_ERROR_SIZE = 0x40 /*!< Size Management error */
+}HAL_I2C_ErrorTypeDef;
+
+/**
+ * @brief I2C handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ErrorTypeDef ErrorCode; /* I2C Error code */
+
+}I2C_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants
+ * @{
+ */
+
+/** @defgroup I2C_addressing_mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define I2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode
+ * @{
+ */
+
+#define I2C_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_own_address2_masks
+ * @{
+ */
+
+#define I2C_OA2_NOMASK ((uint8_t)0x00)
+#define I2C_OA2_MASK01 ((uint8_t)0x01)
+#define I2C_OA2_MASK02 ((uint8_t)0x02)
+#define I2C_OA2_MASK03 ((uint8_t)0x03)
+#define I2C_OA2_MASK04 ((uint8_t)0x04)
+#define I2C_OA2_MASK05 ((uint8_t)0x05)
+#define I2C_OA2_MASK06 ((uint8_t)0x06)
+#define I2C_OA2_MASK07 ((uint8_t)0x07)
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLED I2C_CR1_GCEN
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLED) || \
+ ((CALL) == I2C_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002)
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ReloadEndMode_definition
+ * @{
+ */
+
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE ((uint32_t)0x00000000)
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_StartStopMode_definition
+ * @{
+ */
+
+#define I2C_NO_STARTSTOP ((uint32_t)0x00000000)
+#define I2C_GENERATE_STOP I2C_CR2_STOP
+#define I2C_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE I2C_CR2_START
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_Flag_definition
+ * @{
+ */
+
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: I2C handle.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enables or disables the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_ERRI: Errors interrupt enable
+ * @arg I2C_IT_TCI: Transfer complete interrupt enable
+ * @arg I2C_IT_STOPI: STOP detection interrupt enable
+ * @arg I2C_IT_NACKI: NACK received interrupt enable
+ * @arg I2C_IT_ADDRI: Address match interrupt enable
+ * @arg I2C_IT_RXI: RX interrupt enable
+ * @arg I2C_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_ERRI: Errors interrupt enable
+ * @arg I2C_IT_TCI: Transfer complete interrupt enable
+ * @arg I2C_IT_STOPI: STOP detection interrupt enable
+ * @arg I2C_IT_NACKI: NACK received interrupt enable
+ * @arg I2C_IT_ADDRI: Address match interrupt enable
+ * @arg I2C_IT_RXI: RX interrupt enable
+ * @arg I2C_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_TXE: Transmit data register empty
+ * @arg I2C_FLAG_TXIS: Transmit interrupt status
+ * @arg I2C_FLAG_RXNE: Receive data register not empty
+ * @arg I2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure received flag
+ * @arg I2C_FLAG_STOPF: STOP detection flag
+ * @arg I2C_FLAG_TC: Transfer complete (master mode)
+ * @arg I2C_FLAG_TCR: Transfer complete reload
+ * @arg I2C_FLAG_BERR: Bus error
+ * @arg I2C_FLAG_ARLO: Arbitration lost
+ * @arg I2C_FLAG_OVR: Overrun/Underrun
+ * @arg I2C_FLAG_PECERR: PEC error in reception
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg I2C_FLAG_ALERT: SMBus alert
+ * @arg I2C_FLAG_BUSY: Bus busy
+ * @arg I2C_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_STOPF: STOP detection flag
+ * @arg I2C_FLAG_BERR: Bus error
+ * @arg I2C_FLAG_ARLO: Arbitration lost
+ * @arg I2C_FLAG_OVR: Overrun/Underrun
+ * @arg I2C_FLAG_PECERR: PEC error in reception
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg I2C_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define __HAL_I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define __HAL_I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define __HAL_I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+
+/* Include I2C HAL Extension module */
+#include "stm32f3xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/* IO operation functions *****************************************************/
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+
+/* Peripheral State functions **************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_i2c_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,112 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of I2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2C_EX_H
+#define __STM32F3xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
+
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_Digital_Filter
+ * @{
+ */
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_i2s.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,440 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2S_H
+#define __STM32F3xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F301x8) || \
+ defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC) || \
+ defined(STM32F318xx) || \
+ defined(STM32F358xx) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
+ This parameter can be a value of @ref I2S_Clock_Source */
+
+ uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode.
+ This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x06, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x07 /*!< I2S error state */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief HAL I2S Error Code structure definition
+ */
+typedef enum
+{
+ HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2S_ERROR_TIMEOUT = 0x01, /*!< Timeout error */
+ HAL_I2S_ERROR_OVR = 0x02, /*!< OVR error */
+ HAL_I2S_ERROR_UDR = 0x04, /*!< UDR error */
+ HAL_I2S_ERROR_DMA = 0x08, /*!< DMA transfer error */
+ HAL_I2S_ERROR_UNKNOW = 0x10 /*!< Unknow Error error */
+}HAL_I2S_ErrorTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /* I2S registers base address */
+
+ I2S_InitTypeDef Init; /* I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* I2S Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+
+ __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
+
+}I2S_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2S_Exported_Constants
+ * @{
+ */
+
+/** @defgroup I2S_Clock_Source
+ * @{
+ */
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001)
+#define I2S_CLOCK_SYSCLK ((uint32_t)0x00000002)
+
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
+ ((CLOCK) == I2S_CLOCK_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX)|| \
+ ((MODE) == I2S_MODE_MASTER_RX))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0)
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005)
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_FullDuplex_Mode
+ * @{
+ */
+#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000)
+#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001)
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+ ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupt_configuration_definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flag_definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: I2S handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+
+/* Include I2S HAL Extension module */
+#include "stm32f3xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+/* Peripheral Control and State functions ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F301x8) || */
+ /* defined(STM32F302x8) || defined(STM32F302xC) || */
+ /* defined(STM32F303xC) || defined(STM32F373xC) || */
+ /* defined(STM32F318xx) || */
+ /* defined(STM32F358xx) || defined(STM32F378xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_i2s_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,171 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2s_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of I2S HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2S_EX_H
+#define __STM32F3xx_HAL_I2S_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F301x8) || \
+ defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC) || \
+ defined(STM32F318xx) || \
+ defined(STM32F358xx) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2SEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+#if defined (STM32F302xC) || defined (STM32F303xC) || defined (STM32F358xx)
+#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
+
+/** @brief Enable or disable the specified I2SExt peripheral.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2SEXT_ENABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2SEXT_DISABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2SExt interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2SEXT_ENABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 |= (__INTERRUPT__))
+#define __HAL_I2SEXT_DISABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2SExt interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2SEXT_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((I2SxEXT((__HANDLE__)->Instance)->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2SExt flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2SEXT_GET_FLAG(__HANDLE__, __FLAG__) (((I2SxEXT((__HANDLE__)->Instance)->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2SExt OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2SEXT_CLEAR_OVRFLAG(__HANDLE__) do{(I2SxEXT((__HANDLE__)->Instance)->DR;\
+ (I2SxEXT((__HANDLE__)->Instance)->SR;}while(0)
+/** @brief Clears the I2SExt UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2SEXT_CLEAR_UDRFLAG(__HANDLE__)(I2SxEXT((__HANDLE__)->Instance)->SR)
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions ********************************/
+
+#if defined (STM32F302xC) || defined (STM32F303xC) || defined (STM32F358xx)
+/* Extended features functions ************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+
+/* I2S IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2S_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxRxCpltCallback(I2S_HandleTypeDef *hi2s);
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+/* Peripheral Control and State functions ************************************/
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F301x8) || */
+ /* defined(STM32F302x8) || defined(STM32F302xC) || */
+ /* defined(STM32F303xC) || defined(STM32F373xC) || */
+ /* defined(STM32F318xx) || */
+ /* defined(STM32F358xx) || defined(STM32F378xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2S_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_irda.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,590 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_IRDA_H
+#define __STM32F3xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDAEx_Word_Length */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock
+ to achieve low-power frequency.
+ @note Prescaler value 0 is forbidden */
+
+ uint16_t PowerMode; /*!< Specifies the IRDA power mode.
+ This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL IRDA State structures definition
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief HAL IRDA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
+ HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
+ HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_IRDA_ErrorTypeDef;
+
+/**
+ * @brief IRDA clock sources definition
+ */
+typedef enum
+{
+ IRDA_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ IRDA_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
+ IRDA_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ IRDA_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ IRDA_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ IRDA_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */
+}IRDA_ClockSourceTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ IRDA_InitTypeDef Init; /* IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+
+ uint16_t Mask; /* USART RX RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+
+ HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
+
+}IRDA_HandleTypeDef;
+
+/**
+ * @brief IRDA Configuration enumeration values definition
+ */
+typedef enum
+{
+ IRDA_BAUDRATE = 0x00,
+ IRDA_PARITY = 0x01,
+ IRDA_WORDLENGTH = 0x02,
+ IRDA_MODE = 0x03,
+ IRDA_PRESCALER = 0x04,
+ IRDA_POWERMODE = 0x05
+}IRDA_ControlTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported Constants
+ * @{
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint16_t)0x0000)
+#define IRDA_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint16_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint16_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_IRDA_TX_RX_MODE(MODE) ((((MODE) & (~((uint16_t)(IRDA_MODE_TX_RX)))) == (uint16_t)0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_NORMAL ((uint16_t)0x0000)
+#define IRDA_POWERMODE_LOWPOWER ((uint16_t)USART_CR3_IRLP)
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_State IRDA State
+ * @{
+ */
+#define IRDA_STATE_DISABLE ((uint16_t)0x0000)
+#define IRDA_STATE_ENABLE ((uint16_t)USART_CR1_UE)
+#define IS_IRDA_STATE(STATE) (((STATE) == IRDA_STATE_DISABLE) || \
+ ((STATE) == IRDA_STATE_ENABLE))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_Mode IRDA Mode
+ * @{
+ */
+#define IRDA_MODE_DISABLE ((uint16_t)0x0000)
+#define IRDA_MODE_ENABLE ((uint16_t)USART_CR3_IREN)
+#define IS_IRDA_MODE(STATE) (((STATE) == IRDA_MODE_DISABLE) || \
+ ((STATE) == IRDA_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED ((uint16_t)0x00000000)
+#define IRDA_ONE_BIT_SAMPLE_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_IRDA_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == IRDA_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == IRDA_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
+ * @{
+ */
+#define IRDA_DMA_TX_DISABLE ((uint16_t)0x00000000)
+#define IRDA_DMA_TX_ENABLE ((uint16_t)USART_CR3_DMAT)
+#define IS_IRDA_DMA_TX(DMATX) (((DMATX) == IRDA_DMA_TX_DISABLE) || \
+ ((DMATX) == IRDA_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
+ * @{
+ */
+#define IRDA_DMA_RX_DISABLE ((uint16_t)0x0000)
+#define IRDA_DMA_RX_ENABLE ((uint16_t)USART_CR3_DMAR)
+#define IS_IRDA_DMA_RX(DMARX) (((DMARX) == IRDA_DMA_RX_DISABLE) || \
+ ((DMARX) == IRDA_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define IRDA_FLAG_REACK ((uint32_t)0x00400000)
+#define IRDA_FLAG_TEACK ((uint32_t)0x00200000)
+#define IRDA_FLAG_BUSY ((uint32_t)0x00010000)
+#define IRDA_FLAG_ABRF ((uint32_t)0x00008000)
+#define IRDA_FLAG_ABRE ((uint32_t)0x00004000)
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define IRDA_IT_PE ((uint16_t)0x0028)
+#define IRDA_IT_TXE ((uint16_t)0x0727)
+#define IRDA_IT_TC ((uint16_t)0x0626)
+#define IRDA_IT_RXNE ((uint16_t)0x0525)
+#define IRDA_IT_IDLE ((uint16_t)0x0424)
+
+
+
+/** Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ */
+#define IRDA_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define IRDA_IT_ORE ((uint16_t)0x0300)
+#define IRDA_IT_NE ((uint16_t)0x0200)
+#define IRDA_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
+ * @{
+ */
+#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+ * @{
+ */
+#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \
+ ((PARAM) == IRDA_SENDBREAK_REQUEST) || \
+ ((PARAM) == IRDA_MUTE_MODE_REQUEST) || \
+ ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interruption_Mask IRDA interruptions flag mask
+ * @{
+ */
+#define IRDA_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle state
+ * @param __HANDLE__: IRDA handle.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_REACK: Receive enable ackowledge flag
+ * @arg IRDA_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg IRDA_FLAG_BUSY: Busy flag
+ * @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief Disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1U << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified IRDA interrupt source is enabled.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK)))
+
+
+/** @brief Clears the specified IRDA ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
+ * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
+ * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
+ * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+
+/** @brief Set a specific IRDA request flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+
+
+/** @brief Enable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Ensure that IRDA Baud rate is less or equal to maximum value
+ * @param __BAUDRATE__: specifies the IRDA Baudrate set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201)
+
+/** @brief Ensure that IRDA prescaler value is strictly larger than 0
+ * @param __PRESCALER__: specifies the IRDA prescaler value set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
+
+/**
+ * @}
+ */
+
+/* Include IRDA HAL Extension module */
+#include "stm32f3xx_hal_irda_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_irda_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,410 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_irda_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of IRDA HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_IRDA_EX_H
+#define __STM32F3xx_HAL_IRDA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDAEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IRDAEx_Word_Length IRDA Word Length
+ * @{
+ */
+#if defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8) \
+ || defined (STM32F318xx)
+#define IRDA_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_7B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#else
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#endif
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup IRDAEx_Exported_Macros
+ * @{
+ */
+
+/** @brief Reports the IRDA clock source.
+ * @param __HANDLE__: specifies the IRDA Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval IRDA clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F303xE) \
+ || defined(STM32F318xC) || defined(STM32F358xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == UART4) \
+ { \
+ switch(__HAL_RCC_GET_UART4_SOURCE()) \
+ { \
+ case RCC_UART4CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART4CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART4CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART4CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if ((__HANDLE__)->Instance == UART5) \
+ { \
+ switch(__HAL_RCC_GET_UART5_SOURCE()) \
+ { \
+ case RCC_UART5CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART5CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART5CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART5CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#elif defined(STM32F334x8) || defined(STM32F303x8) || defined(STM32F328xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#else
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#endif /* defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F303xE) || defined(STM32F318xC) || defined(STM32F358xx) */
+
+
+/** @brief Computes the mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * @param __HANDLE__: specifies the IRDA Handle
+ * @retval none
+ */
+#if defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8) \
+ || defined (STM32F318xx)
+#define __HAL_IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8)
+ || defined (STM32F318xx) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_IRDA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_iwdg.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,275 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_IWDG_H
+#define __STM32F3xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief IWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */
+ HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */
+ HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */
+ HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */
+ HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */
+
+}HAL_IWDG_StateTypeDef;
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+ uint32_t Window; /*!< Specifies the window value to be compared to the down-counter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG Handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< IWDG Locking object */
+
+ __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */
+
+}IWDG_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Registers_BitMask
+ * @brief IWDG registers bit mask
+ * @{
+ */
+/* --- KR Register ---*/
+/* KR register bit mask */
+#define KR_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG Reload Counter Enable */
+#define KR_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG Peripheral Enable */
+#define KR_KEY_EWA ((uint32_t)0x5555) /*!< IWDG KR Write Access Enable */
+#define KR_KEY_DWA ((uint32_t)0x0000) /*!< IWDG KR Write Access Disable */
+
+#define IS_IWDG_KR(KR) (((KR) == KR_KEY_RELOAD) || \
+ ((KR) == KR_KEY_ENABLE))|| \
+ ((KR) == KR_KEY_EWA)) || \
+ ((KR) == KR_KEY_DWA))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag_definition
+ * @{
+ */
+#define IWDG_FLAG_PVU ((uint32_t)0x0001) /*!< Watchdog counter prescaler value update Flag */
+#define IWDG_FLAG_RVU ((uint32_t)0x0002) /*!< Watchdog counter reload value update Flag */
+#define IWDG_FLAG_WVU ((uint32_t)0x0004) /*!< Watchdog counter window value update Flag */
+
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || \
+ ((FLAG) == IWDG_FLAG_RVU) || \
+ ((FLAG) == IWDG_FLAG_WVU))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 ((uint8_t)0x01) /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 ((uint8_t)0x02) /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 ((uint8_t)0x03) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 ((uint8_t)0x04) /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 ((uint8_t)0x05) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 ((uint8_t)0x06) /*!< IWDG prescaler set to 256 */
+
+#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_PRESCALER_4) || \
+ ((PRESCALER) == IWDG_PRESCALER_8) || \
+ ((PRESCALER) == IWDG_PRESCALER_16) || \
+ ((PRESCALER) == IWDG_PRESCALER_32) || \
+ ((PRESCALER) == IWDG_PRESCALER_64) || \
+ ((PRESCALER) == IWDG_PRESCALER_128)|| \
+ ((PRESCALER) == IWDG_PRESCALER_256))
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Reload_Value
+ * @{
+ */
+#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_CounterWindow_Value
+ * @{
+ */
+#define IS_IWDG_WINDOW(VALUE) ((VALUE) <= 0xFFF)
+/**
+ * @}
+ */
+/** @defgroup IWDG_Window option disable
+ * @{
+ */
+#define IWDG_WINDOW_DISABLE 0xFFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Macro
+ * @{
+ */
+
+/** @brief Reset IWDG handle state
+ * @param __HANDLE__: IWDG handle.
+ * @retval None
+ */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+ * @brief Enables the IWDG peripheral.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) ((__HANDLE__)->Instance->KR |= KR_KEY_ENABLE)
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) (((__HANDLE__)->Instance->KR) |= KR_KEY_RELOAD)
+
+/**
+ * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) (((__HANDLE__)->Instance->KR) |= KR_KEY_EWA)
+
+/**
+ * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) (((__HANDLE__)->Instance->KR) |= KR_KEY_DWA)
+
+/**
+ * @brief Gets the selected IWDG's flag status.
+ * @param __HANDLE__: IWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag
+ * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag
+ * @arg IWDG_FLAG_WVU: Watchdog counter window value flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+
+/* Peripheral State functions ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_opamp.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,450 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_opamp.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of OPAMP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_OPAMP_H
+#define __STM32F3xx_HAL_OPAMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined (STM32F303xC) || defined (STM32F358xx) || defined (STM32F302xC) || \
+ defined (STM32F303x8) || defined (STM32F328xx) || defined (STM32F302x8) || \
+ defined (STM32F301x8) || defined (STM32F318xx) || defined (STM32F334x8)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup OPAMP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief OPAMP Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the OPAMP mode
+ This parameter must be a value of @ref OPAMP_Mode
+ mode is either Standalone, - Follower or PGA */
+
+ uint32_t InvertingInput; /*!< Specifies the inverting input in Standalone & Pga modes
+ - In Standalone mode: i.e when mode is OPAMP_STANDALONE_MODE
+ This parameter must be a value of @ref OPAMP_InvertingInput
+ InvertingInput is either VM0 or VM1
+ - In PGA mode: i.e when mode is OPAMP_PGA_MODE
+ & in Follower mode i.e when mode is OPAMP_FOLLOWER_MODE
+ This parameter is Not Applicable */
+
+ uint32_t NonInvertingInput; /*!< Specifies the non inverting input of the opamp:
+ This parameter must be a value of @ref OPAMP_NonInvertingInput
+ NonInvertingInput is either VP0, VP1, VP3 or VP4 */
+
+ uint32_t TimerControlledMuxmode; /*!< Specifies if the Timer controlled Mux mode is enabled or disabled
+ This parameter must be a value of @ref OPAMP_TimerControlledMuxmode */
+
+ uint32_t InvertingInputSecondary; /*!< Specifies the inverting input (secondary) of the opamp when
+ TimerControlledMuxmode is enabled
+ i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE
+ - In Standalone mode: i.e when mode is OPAMP_STANDALONE_MODE
+ This parameter must be a value of @ref OPAMP_InvertingInputSecondary
+ InvertingInputSecondary is either VM0 or VM1
+ - In PGA mode: i.e when mode is OPAMP_PGA_MODE
+ & in Follower mode i.e when mode is OPAMP_FOLLOWER_MODE
+ This parameter is Not Applicable */
+
+ uint32_t NonInvertingInputSecondary; /*!< Specifies the non inverting input (secondary) of the opamp when
+ TimerControlledMuxmode is enabled
+ i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE
+ This parameter must be a value of @ref OPAMP_NonInvertingInputSecondary
+ NonInvertingInput is either VP0, VP1, VP3 or VP3 */
+
+ uint32_t PgaConnect; /*!< Specifies the inverting pin in PGA mode
+ i.e. when mode is OPAMP_PGA_MODE
+ This parameter must be a value of @ref OPAMP_PgaConnect
+ Either: not connected, connected to VM0, connected to VM1
+ (VM0 or VM1 are typically used for external filtering) */
+
+ uint32_t PgaGain; /*!< Specifies the gain in PGA mode
+ i.e. when mode is OPAMP_PGA_MODE.
+ This parameter must be a value of @ref OPAMP_PgaGain (2, 4, 8 or 16 ) */
+
+ uint32_t UserTrimming; /*!< Specifies the trimming mode
+ This parameter must be a value of @ref OPAMP_UserTrimming
+ UserTrimming is either factory or user timming */
+
+ uint32_t TrimmingValueP; /*!< Specifies the offset trimming value (PMOS)
+ i.e. when UserTrimming is OPAMP_TRIMMING_USER.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint32_t TrimmingValueN; /*!< Specifies the offset trimming value (NMOS)
+ i.e. when UserTrimming is OPAMP_TRIMMING_USER.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+}OPAMP_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+
+typedef enum
+{
+ HAL_OPAMP_STATE_RESET = 0x00000000, /*!< OPMAP is not yet Initialized */
+
+ HAL_OPAMP_STATE_READY = 0x00000001, /*!< OPAMP is initialized and ready for use */
+ HAL_OPAMP_STATE_CALIBBUSY = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */
+
+ HAL_OPAMP_STATE_BUSY = 0x00000004, /*!< OPAMP is enabled and running in normal mode */
+ HAL_OPAMP_STATE_BUSYLOCKED = 0x00000005, /*!< OPAMP is locked
+ only system reset allows reconfiguring the opamp. */
+
+}HAL_OPAMP_StateTypeDef;
+
+/**
+ * @brief PPP Handle Structure definition to @brief OPAMP Handle Structure definition
+ */
+typedef struct
+{
+ OPAMP_TypeDef *Instance; /*!< OPAMP instance's registers base address */
+ OPAMP_InitTypeDef Init; /*!< OPAMP required parameters */
+ HAL_StatusTypeDef Status; /*!< OPAMP peripheral status */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_OPAMP_StateTypeDef State; /*!< OPAMP communication state */
+
+} OPAMP_HandleTypeDef;
+
+/**
+ * @brief OPAMP_TrimmingValueTypeDef @brief definition
+ */
+
+typedef uint32_t OPAMP_TrimmingValueTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Constants
+ * @{
+ */
+
+/**
+ * CSR register Mask
+ */
+/* Used for Init phase */
+#define OPAMP_CSR_UPDATE_PARAMETERS_INIT_MASK (OPAMP_CSR_TRIMOFFSETN | OPAMP_CSR_TRIMOFFSETP \
+ | OPAMP_CSR_USERTRIM | OPAMP_CSR_PGGAIN | OPAMP_CSR_VPSSEL \
+ | OPAMP_CSR_VMSSEL | OPAMP_CSR_TCMEN | OPAMP_CSR_VPSEL \
+ | OPAMP_CSR_VPSEL | OPAMP_CSR_FORCEVP)
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_Mode
+ * @{
+ */
+#define OPAMP_STANDALONE_MODE ((uint32_t)0x00000000) /*!< standalone mode */
+#define OPAMP_PGA_MODE OPAMP_CSR_VMSEL_1 /*!< PGA mode */
+#define OPAMP_FOLLOWER_MODE OPAMP_CSR_VMSEL /*!< follower mode */
+
+
+#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
+ ((INPUT) == OPAMP_PGA_MODE) || \
+ ((INPUT) == OPAMP_FOLLOWER_MODE))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_NonInvertingInput
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_CSR_VPSEL /*!< VP0 (PA1 for OPAMP1, PA7 for OPAMP2, PB0 for OPAMP3, PB13 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_VP1 ((uint32_t)0x00000000) /*!< VP1 (PA7 for OPAMP1, PD14 for OPAMP2, PB13 for OPAMP3, PD11 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_CSR_VPSEL_1 /*!< VP2 (PA3 for OPAMP1, PB0 for OPAMP2, PA1 for OPAMP3, PA4 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_CSR_VPSEL_0 /*!< vp3 (PA5 for OPAMP1, PB14 for OPAMP2, PA5 for OPAMP3, PB11 for OPAMP4)
+ connected to OPAMPx non inverting input */
+
+#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_VP0) || \
+ ((INPUT) == OPAMP_NONINVERTINGINPUT_VP1) || \
+ ((INPUT) == OPAMP_NONINVERTINGINPUT_VP2) || \
+ ((INPUT) == OPAMP_NONINVERTINGINPUT_VP3))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_InvertingInput
+ * @{
+ */
+
+#define IOPAMP_INVERTINGINPUT_VM0 ((uint32_t)0x00000000) /*!< inverting input connected to VM0 */
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_CSR_VMSEL_0 /*!< inverting input connected to VM1 */
+
+#define IS_OPAMP_INVERTING_INPUT(INPUT) (((INPUT) == IOPAMP_INVERTINGINPUT_VM0) || \
+ ((INPUT) == IOPAMP_INVERTINGINPUT_VM1))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_TimerControlledMuxmode
+ * @{
+ */
+ #define OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE ((uint32_t)0x00000000) /*!< Timer controlled Mux mode disabled */
+ #define OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE OPAMP_CSR_TCMEN /*!< Timer controlled Mux mode enabled */
+
+ #define IS_OPAMP_TIMERCONTROLLED_MUXMODE(MUXMODE) (((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE) || \
+ ((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE))
+/**
+ * @}
+ */
+
+ /** @defgroup OPAMP_NonInvertingInputSecondary
+ * @{
+ */
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_CSR_VPSSEL /*!< VP0 (PA1 for OPAMP1, PA7 for OPAMP2, PB0 for OPAMP3, PB13 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 ((uint32_t)0x00000000) /*!< VP1 (PA7 for OPAMP1, PD14 for OPAMP2, PB13 for OPAMP3, PD11 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_CSR_VPSSEL_1 /*!< VP2 (PA3 for OPAMP1, PB0 for OPAMP2, PA1 for OPAMP3, PA4 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_CSR_VPSSEL_0 /*!< VP3 (PA5 for OPAMP1, PB14 for OPAMP2, PA5 for OPAMP3, PB11 for OPAMP4)
+ connected to OPAMPx non inverting input */
+
+#define IS_OPAMP_SEC_NONINVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP0) || \
+ ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP1) || \
+ ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP2) || \
+ ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP3))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_InvertingInputSecondary
+ * @{
+ */
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 ((uint32_t)0x00000000) /*!< VM0 (PC5 for OPAMP1 and OPAMP2, PB10 for OPAMP3 and OPAMP4)
+ connected to OPAMPx inverting input */
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_CSR_VMSSEL /*!< VM1 (PA3 for OPAMP1, PA5 for OPAMP2, PB2 for OPAMP3, PD8 for OPAMP4)
+ connected to OPAMPx inverting input */
+
+#define IS_OPAMP_SEC_INVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_INVERTINGINPUT_VM0) || \
+ ((INPUT) == OPAMP_SEC_INVERTINGINPUT_VM1))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_PgaConnect
+ * @{
+ */
+
+#define OPAMP_PGACONNECT_NO ((uint32_t)0x00000000) /*!< In PGA mode, the non inverting input is not connected */
+#define OPAMP_PGACONNECT_VM0 OPAMP_CSR_PGGAIN_3 /*!< In PGA mode, the non inverting input is connected to VM0 */
+#define OPAMP_PGACONNECT_VM1 (OPAMP_CSR_PGGAIN_2 | OPAMP_CSR_PGGAIN_3) /*!< In PGA mode, the non inverting input is connected to VM1 */
+
+#define IS_OPAMP_PGACONNECT(CONNECT) (((CONNECT) == OPAMP_PGACONNECT_NO) || \
+ ((CONNECT) == OPAMP_PGACONNECT_VM0) || \
+ ((CONNECT) == OPAMP_PGACONNECT_VM1))
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_PgaGain
+ * @{
+ */
+
+#define OPAMP_PGA_GAIN_2 ((uint32_t)0x00000000) /*!< PGA gain = 2 */
+#define OPAMP_PGA_GAIN_4 OPAMP_CSR_PGGAIN_0 /*!< PGA gain = 4 */
+#define OPAMP_PGA_GAIN_8 OPAMP_CSR_PGGAIN_1 /*!< PGA gain = 8 */
+#define OPAMP_PGA_GAIN_16 (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1) /*!< PGA gain = 16 */
+
+#define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \
+ ((GAIN) == OPAMP_PGA_GAIN_4) || \
+ ((GAIN) == OPAMP_PGA_GAIN_8) || \
+ ((GAIN) == OPAMP_PGA_GAIN_16))
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_UserTrimming
+ * @{
+ */
+
+#define OPAMP_TRIMMING_FACTORY ((uint32_t)0x00000000) /*!< Factory trimming */
+#define OPAMP_TRIMMING_USER OPAMP_CSR_USERTRIM /*!< User trimming */
+
+#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
+ ((TRIMMING) == OPAMP_TRIMMING_USER))
+
+/** @defgroup OPAMP_FactoryTrimming
+ * @{
+ */
+
+#define OPAMP_FACTORYTRIMMING_DUMMY ((uint32_t)0xFFFFFFFF) /*!< Dummy trimming value */
+
+#define OPAMP_FACTORYTRIMMING_N ((uint32_t)0x00000000) /*!< Offset trimming N */
+#define OPAMP_FACTORYTRIMMING_P ((uint32_t)0x00000001) /*!< Offset trimming P */
+
+#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
+ ((TRIMMING) == OPAMP_FACTORYTRIMMING_P))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_TrimmingValue
+ * @{
+ */
+
+#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1F)
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_Input
+ * @{
+ */
+
+#define OPAMP_INPUT_INVERTING ((uint32_t) 24) /*!< Inverting input */
+#define OPAMP_INPUT_NONINVERTING ((uint32_t) 19) /*!< Non inverting input */
+
+#define IS_OPAMP_INPUT(INPUT) (((INPUT) == OPAMP_INPUT_INVERTING) || \
+ ((INPUT) == OPAMP_INPUT_NONINVERTING))
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_VREF
+ * @{
+ */
+
+#define OPAMP_VREF_3VDDA ((uint32_t)0x00000000) /*!< OPMAP Vref = 3.3% VDDA */
+#define OPAMP_VREF_10VDDA OPAMP_CSR_CALSEL_0 /*!< OPMAP Vref = 10% VDDA */
+#define OPAMP_VREF_50VDDA OPAMP_CSR_CALSEL_1 /*!< OPMAP Vref = 50% VDDA */
+#define OPAMP_VREF_90VDDA OPAMP_CSR_CALSEL /*!< OPMAP Vref = 90% VDDA */
+
+#define IS_OPAMP_VREF(VREF) (((VREF) == OPAMP_VREF_3VDDA) || \
+ ((VREF) == OPAMP_VREF_10VDDA) || \
+ ((VREF) == OPAMP_VREF_50VDDA) || \
+ ((VREF) == OPAMP_VREF_90VDDA))
+
+/**
+ * @}
+ */
+
+ /** @defgroup OPAMP_Vref2ADCforCalib
+ */
+
+#define OPAMP_VREF_NOTCONNECTEDTO_ADC ((uint32_t)0x00000000) /*!< VREF not connected to ADC */
+#define OPAMP_VREF_CONNECTEDTO_ADC ((uint32_t)0x00000001) /*!< VREF not connected to ADC */
+
+#define IS_OPAMP_ALLOPAMPVREF_CONNECT(CONNECT) (((CONNECT) == OPAMP_VREF_NOTCONNECTEDTO_ADC) || \
+ ((CONNECT) == OPAMP_VREF_CONNECTEDTO_ADC))
+
+
+ /**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset OPAMP handle state
+ * @param __HANDLE__: OPAMP handle.
+ * @retval None
+ */
+#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
+
+/* Include OPAMP HAL Extension module */
+#include "stm32f3xx_hal_opamp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp);
+
+/* Peripheral State functions **************************************************/
+HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);
+OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F303xC STM32F358xx STM32F302xC STM32F303x8 STM32F328xx
+ STM32F302x8 STM32F301x8 STM32F318xx STM32F334x8 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_OPAMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_opamp_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,104 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_opamp_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of OPAMP HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_OPAMP_EX_H
+#define __STM32F3xx_HAL_OPAMP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup OPAMPEx
+ * @{
+ */
+
+
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup OPAMPEx_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* I/O operation functions *****************************************************/
+
+#if defined (STM32F302xC)
+
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2);
+
+#endif /* STM32F302xC */
+
+#if defined (STM32F303xC) || defined (STM32F358xx)
+
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2, OPAMP_HandleTypeDef *hopamp3, OPAMP_HandleTypeDef *hopamp4);
+#endif /* STM32F303xC || STM32F358xx */
+
+/* Peripheral Control functions ************************************************/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_OPAMP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_pcd.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,710 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PCD_H
+#define __STM32F3xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+ /**
+ * @brief PCD State structures definition
+ */
+typedef enum
+{
+ PCD_READY = 0x00,
+ PCD_ERROR = 0x01,
+ PCD_BUSY = 0x02,
+ PCD_TIMEOUT = 0x03
+} PCD_StateTypeDef;
+
+typedef enum
+{
+ /* double buffered endpoint direction */
+ PCD_EP_DBUF_OUT,
+ PCD_EP_DBUF_IN,
+ PCD_EP_DBUF_ERR,
+}PCD_EP_DBUF_DIR;
+
+/* endpoint buffer number */
+typedef enum
+{
+ PCD_EP_NOBUF,
+ PCD_EP_BUF0,
+ PCD_EP_BUF1
+}PCD_EP_BUF_NUM;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref USB_EP0_MPS */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable Low Power mode */
+
+ uint32_t lpm_enable; /*!< Enable or disable Battery charging. */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
+
+}PCD_InitTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type */
+
+ uint16_t pmaadress; /*!< PMA Address
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr0; /*!< PMA Address0
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr1; /*!< PMA Address1
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint8_t doublebuffer; /*!< Double buffer enable
+ This parameter can be 0 or 1 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}PCD_EPTypeDef;
+
+typedef USB_TypeDef PCD_TypeDef;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ __IO uint8_t USB_Address; /*!< USB Address */
+ PCD_EPTypeDef IN_ep[5]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[5]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+#include "stm32f3xx_hal_pcd_ex.h"
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup USB_Core_Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0 /* Not Supported */
+#define PCD_SPEED_FULL 2
+/**
+ * @}
+ */
+
+ /** @defgroup USB_Core_PHY
+ * @{
+ */
+#define PCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP0_MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0
+#define DEP0CTL_MPS_32 1
+#define DEP0CTL_MPS_16 2
+#define DEP0CTL_MPS_8 3
+
+#define PCD_EP0MPS_64 DEP0CTL_MPS_64
+#define PCD_EP0MPS_32 DEP0CTL_MPS_32
+#define PCD_EP0MPS_16 DEP0CTL_MPS_16
+#define PCD_EP0MPS_08 DEP0CTL_MPS_8
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Type
+ * @{
+ */
+#define PCD_EP_TYPE_CTRL 0
+#define PCD_EP_TYPE_ISOC 1
+#define PCD_EP_TYPE_BULK 2
+#define PCD_EP_TYPE_INTR 3
+/**
+ * @}
+ */
+
+#define PCD_ENDP0 ((uint8_t)0)
+#define PCD_ENDP1 ((uint8_t)1)
+#define PCD_ENDP2 ((uint8_t)2)
+#define PCD_ENDP3 ((uint8_t)3)
+#define PCD_ENDP4 ((uint8_t)4)
+#define PCD_ENDP5 ((uint8_t)5)
+#define PCD_ENDP6 ((uint8_t)6)
+#define PCD_ENDP7 ((uint8_t)7)
+
+/* Endpoint Kind */
+#define PCD_SNG_BUF 0
+#define PCD_DBL_BUF 1
+
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup PCD_Interrupt_Clock
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
+
+#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
+#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
+#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/* Internal macros -----------------------------------------------------------*/
+
+/* SetENDPOINT */
+#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&USBx->EP0R + bEpNum * 2)= (uint16_t)wRegValue)
+
+/* GetENDPOINT */
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&USBx->EP0R + bEpNum * 2))
+
+
+
+/**
+ * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wType: Endpoint Type.
+ * @retval None
+ */
+#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT(USBx, bEpNum,\
+ ((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_MASK) | wType )))
+
+/**
+ * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Endpoint Type
+ */
+#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_FIELD)
+
+
+/**
+ * @brief free buffer used from the application realizing it to the line
+ toggles bit SW_BUF in the double buffered endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: Direction
+ * @retval None
+ */
+#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
+{\
+ if (bDir == PCD_EP_DBUF_OUT)\
+ { /* OUT double buffered endpoint */\
+ PCD_TX_DTOG(USBx, bEpNum);\
+ }\
+ else if (bDir == PCD_EP_DBUF_IN)\
+ { /* IN double buffered endpoint */\
+ PCD_RX_DTOG(USBx, bEpNum);\
+ }\
+}
+
+/**
+ * @brief gets direction of the double buffered endpoint
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval EP_DBUF_OUT, EP_DBUF_IN,
+ * EP_DBUF_ERR if the endpoint counter not yet programmed.
+ */
+#define PCD_GET_DB_DIR(USBx, bEpNum)\
+{\
+ if ((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum) & 0xFC00) != 0)\
+ return(PCD_EP_DBUF_OUT);\
+ else if (((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x03FF) != 0)\
+ return(PCD_EP_DBUF_IN);\
+ else\
+ return(PCD_EP_DBUF_ERR);\
+}
+
+/**
+ * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & wState)!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & wState)!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_TX_STATUS */
+
+/**
+ * @brief sets the status for rx transfer (bits STAT_TX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & wState)!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & wState)!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_RX_STATUS */
+
+/**
+ * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wStaterx: new state.
+ * @param wStatetx: new state.
+ * @retval None
+ */
+#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
+ register uint32_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & wStaterx)!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & wStaterx)!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & wStatetx)!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & wStatetx)!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ PCD_SET_ENDPOINT(USBx, bEpNum, _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
+ } /* PCD_SET_EP_TXRX_STATUS */
+
+/**
+ * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
+ * /STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval status
+ */
+#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_STAT)
+
+#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_STAT)
+
+/**
+ * @brief sets directly the VALID tx/rx-status into the endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS(USBx, bEpNum, USB_EP_TX_VALID))
+
+#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS(USBx, bEpNum, USB_EP_RX_VALID))
+
+/**
+ * @brief checks stall condition in an endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval TRUE = endpoint in stall condition.
+ */
+#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS(USBx, bEpNum) \
+ == USB_EP_TX_STALL)
+#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS(USBx, bEpNum) \
+ == USB_EP_RX_STALL)
+
+/**
+ * @brief set & clear EP_KIND bit.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT(USBx, bEpNum) | USB_EP_KIND) & USB_EPREG_MASK))))
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPKIND_MASK))))
+
+/**
+ * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND(USBx, bEpNum)
+#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
+
+/**
+ * @brief Sets/clears directly EP_KIND bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND(USBx, bEpNum)
+#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
+
+/**
+ * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum,\
+ PCD_GET_ENDPOINT(USBx, bEpNum) & 0x7FFF & USB_EPREG_MASK))
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum,\
+ PCD_GET_ENDPOINT(USBx, bEpNum) & 0xFF7F & USB_EPREG_MASK))
+
+/**
+ * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
+#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
+
+/**
+ * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_RX) != 0)\
+ PCD_RX_DTOG(USBx, bEpNum)
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_TX) != 0)\
+ PCD_TX_DTOG(USBx, bEpNum)
+
+/**
+ * @brief Sets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bAddr: Address.
+ * @retval None
+ */
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT(USBx, bEpNum,\
+ USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK) | bAddr)
+
+#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPADDR_FIELD))
+
+/**
+ * @brief sets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wAddr: address to be set (must be word aligned).
+ * @retval None
+ */
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1) << 1))
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1) << 1))
+
+/**
+ * @brief Gets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval address of the buffer.
+ */
+#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS(USBx, bEpNum))
+#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS(USBx, bEpNum))
+
+/**
+ * @brief Sets counter of rx buffer with no. of blocks.
+ * @param dwReg: Register
+ * @param wCount: Counter.
+ * @param wNBlocks: no. of Blocks.
+ * @retval None
+ */
+#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
+ wNBlocks = wCount >> 5;\
+ if((wCount & 0x1f) == 0)\
+ wNBlocks--;\
+ *pdwReg = (uint16_t)((wNBlocks << 10) | 0x8000);\
+ }/* PCD_CALC_BLK32 */
+
+#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
+ wNBlocks = wCount >> 1;\
+ if((wCount & 0x1) != 0)\
+ wNBlocks++;\
+ *pdwReg = (uint16_t)(wNBlocks << 10);\
+ }/* PCD_CALC_BLK2 */
+
+#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
+ uint16_t wNBlocks;\
+ if(wCount > 62){PCD_CALC_BLK32(dwReg,wCount,wNBlocks);}\
+ else {PCD_CALC_BLK2(dwReg,wCount,wNBlocks);}\
+ }/* PCD_SET_EP_CNT_RX_REG */
+
+#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_TX_CNT(USBx, bEpNum); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ }
+/**
+ * @brief sets counter for the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wCount: Counter value.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT(USBx, bEpNum) = wCount)
+
+
+/**
+ * @brief gets counter of the tx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Counter value
+ */
+#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x3ff)
+#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum)) & 0x3ff)
+
+/**
+ * @brief Sets buffer 0/1 address in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @retval Counter value
+ */
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wBuf0Addr);}
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wBuf1Addr);}
+
+/**
+ * @brief Sets addresses in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @param wBuf1Addr = buffer 1 address.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
+ PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr);\
+ PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr);\
+ } /* PCD_SET_EP_DBUF_ADDR */
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS(USBx, bEpNum))
+#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS(USBx, bEpNum))
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: endpoint dir EP_DBUF_OUT = OUT
+ * EP_DBUF_IN = IN
+ * @param wCount: Counter value
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
+ if(bDir == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount);} \
+ else if(bDir == PCD_EP_DBUF_IN)\
+ /* IN endpoint */ \
+ *PCD_EP_TX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
+ } /* SetEPDblBuf0Count*/
+
+#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
+ if(bDir == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount);}\
+ else if(bDir == PCD_EP_DBUF_IN)\
+ /* IN endpoint */\
+ *PCD_EP_RX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
+ } /* SetEPDblBuf1Count */
+
+#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
+ PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount); \
+ PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount); \
+ } /* PCD_SET_EP_DBUF_CNT */
+
+/**
+ * @brief Gets buffer 0/1 rx/tx counter for double buffering.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT(USBx, bEpNum))
+#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT(USBx, bEpNum))
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+/* I/O operation functions *****************************************************/
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/* Peripheral State functions **************************************************/
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+
+void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F302x8) || defined(STM32F302xC) || */
+ /* defined(STM32F303xC) || defined(STM32F373xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_pcd_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,125 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PCD_EX_H
+#define __STM32F3xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/**
+ * @brief Gets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F373xC)
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8)*2+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+2)*2+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+4)*2+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+6)*2+ ((uint32_t)USBx + 0x400)))
+
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint32_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ }
+
+#endif /* STM32F302xC || STM32F303xC || STM32F373xC */
+
+
+#if defined(STM32F302x8)
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8)+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+2)+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+4)+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+6)+ ((uint32_t)USBx + 0x400)))
+
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ }
+
+#endif /* STM32F302x8 */
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress);
+
+ __weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F302x8) || defined(STM32F302xC) || */
+ /* defined(STM32F303xC) || defined(STM32F373xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_pwr.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,225 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_H
+#define __STM32F3xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+#define CR_OFFSET (PWR_OFFSET + 0x00)
+/* Alias word address of DBP bit */
+#define DBP_BitNumber POSITION_VAL(PWR_CR_DBP)
+#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BitNumber POSITION_VAL(PWR_CR_PVDE)
+#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+#define CSR_OFFSET (PWR_OFFSET + 0x04)
+/* Alias word address of EWUP1 bit */
+#define EWUP1_BitNumber POSITION_VAL(PWR_CSR_EWUP1)
+#define CSR_EWUP1_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP1_BitNumber * 4))
+
+/* Alias word address of EWUP2 bit */
+#define EWUP2_BitNumber POSITION_VAL(PWR_CSR_EWUP2)
+#define CSR_EWUP2_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP2_BitNumber * 4))
+
+/* Alias word address of EWUP3 bit */
+#define EWUP3_BitNumber POSITION_VAL(PWR_CSR_EWUP3)
+#define CSR_EWUP3_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP3_BitNumber * 4))
+
+/** @defgroup PWR_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins
+ * @{
+ */
+
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
+#define PWR_WAKEUP_PIN3 ((uint32_t)0x02)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+ ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY))
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+ * voltage VREFINT is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2)
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f3xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/* Peripheral Control functions **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_pwr_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,240 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_EX_H
+#define __STM32F3xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F301x8) || \
+ defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+ defined(STM32F334x8)
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level
+ This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+#endif /* STM32F301x8 || STM32F302x8 || STM32F302xC || */
+ /* STM32F303x8 || STM32F303xC */
+ /* STM32F373xC || STM32F334x8 */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Constants
+ * @{
+ */
+
+#if defined(STM32F301x8) || \
+ defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+ defined(STM32F334x8)
+/** @defgroup PWREx_PVD_detection_level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_PVD_Mode
+ * @{
+ */
+#define PWR_MODE_EVT ((uint32_t)0x00000000) /*!< No Interrupt */
+#define PWR_MODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_MODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_MODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \
+ ((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING))
+/**
+ * @}
+ */
+
+#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F302xC || */
+ /* STM32F303x8 || STM32F303xC */
+ /* STM32F373xC || STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup PWREx_SDADC_ANALOGx
+ * @{
+ */
+#define PWR_SDADC_ANALOG1 ((uint32_t)PWR_CR_SDADC1EN)
+#define PWR_SDADC_ANALOG2 ((uint32_t)PWR_CR_SDADC2EN)
+#define PWR_SDADC_ANALOG3 ((uint32_t)PWR_CR_SDADC3EN)
+#define IS_PWR_SDADC_ANALOG(SDADC) (((SDADC) == PWR_SDADC_ANALOG1) || \
+ ((SDADC) == PWR_SDADC_ANALOG2) || \
+ ((SDADC) == PWR_SDADC_ANALOG3))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros
+ * @{
+ */
+
+#if defined(STM32F301x8) || \
+ defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+ defined(STM32F334x8)
+/**
+ * @brief Enable the PVD Exti Line.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be enabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the PVD EXTI Line.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None
+ */
+#define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be cleared.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__) (EXTI->PR & (__EXTILINE__))
+
+/**
+ * @brief Clear the PVD EXTI flag.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be cleared.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__) (EXTI->PR = (__EXTILINE__))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F302xC || */
+ /* STM32F303x8 || STM32F303xC */
+ /* STM32F373xC || STM32F334x8 */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Peripheral Control functions ***********************************************/
+#if defined(STM32F301x8) || \
+ defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F373xC) || \
+ defined(STM32F334x8)
+void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* STM32F301x8 || STM32F302x8 || STM32F302xC || */
+ /* STM32F303x8 || STM32F303xC */
+ /* STM32F373xC || STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+void HAL_PWREx_EnableSDADCAnalog(uint32_t Analogx);
+void HAL_PWREx_DisableSDADCAnalog(uint32_t Analogx);
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_rcc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1096 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_H
+#define __STM32F3xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< PLLState: The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t HSEPredivValue; /*!< The HSE predivision factor value.
+ This parameter can be a value of @ref RCC_HSE_Predivision_Factor */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The calibration trimming value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
+/* Alias word address of HSION bit */
+#define HSION_BitNumber 0
+#define CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (HSION_BitNumber * 4))
+/* Alias word address of HSEON bit */
+#define HSEON_BitNumber 16
+#define CR_HSEON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (HSEON_BitNumber * 4))
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber 19
+#define CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber 24
+#define CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x04)
+/* Alias word address of PLLSRC bit */
+#define PLLSRC_BitNumber 16
+#define CFGR_PLLSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (PLLSRC_BitNumber * 4))
+
+/* --- CIR Register ---*/
+#define RCC_CIR_OFFSET (RCC_OFFSET + 0x08)
+
+/* --- BDCR Register ---*/
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x20)
+/* Alias word address of LSEON bit */
+#define LSEON_BitNumber 0
+#define BDCR_LSEON_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (LSEON_BitNumber * 4))
+/* Alias word address of RTCEN bit */
+#define RTCEN_BitNumber 15
+#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber 16
+#define BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+
+/* --- CSR Register ---*/
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x24)
+/* Alias word address of LSION bit */
+#define LSION_BitNumber 0
+#define CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+/* Alias word address of RMVF bit */
+#define RMVF_BitNumber 24
+#define CSR_RMVF_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (RMVF_BitNumber * 4))
+
+/* CR register byte 2 (Bits[23:16]) base address */
+#define CR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CR_OFFSET + 0x02)
+
+/* CIR register byte 1 (Bits[15:8]) base address */
+#define CIR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x01)
+
+/* CIR register byte 2 (Bits[23:16]) base address */
+#define CIR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x02)
+
+/* CSR register byte 1 (Bits[15:8]) base address */
+#define CSR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CSR_OFFSET + 0x01)
+
+/* BDCR register byte 0 (Bits[7:0] base address */
+#define BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+/* LSE state change timeout */
+#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+
+/* Disable Backup domain write protection state change timeout */
+#define DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint32_t)0x00000000)
+#define RCC_HSE_ON ((uint32_t)0x00000001)
+#define RCC_HSE_BYPASS ((uint32_t)0x00000005)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Predivision_Factor
+ * @{
+ */
+
+#define RCC_HSE_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+#define IS_RCC_HSE_PREDIV(DIV) (((DIV) == RCC_HSE_PREDIV_DIV1) || ((DIV) == RCC_HSE_PREDIV_DIV2) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV3) || ((DIV) == RCC_HSE_PREDIV_DIV4) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV5) || ((DIV) == RCC_HSE_PREDIV_DIV6) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV7) || ((DIV) == RCC_HSE_PREDIV_DIV8) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV9) || ((DIV) == RCC_HSE_PREDIV_DIV10) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV11) || ((DIV) == RCC_HSE_PREDIV_DIV12) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV13) || ((DIV) == RCC_HSE_PREDIV_DIV14) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV15) || ((DIV) == RCC_HSE_PREDIV_DIV16))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint32_t)0x00000000)
+#define RCC_LSE_ON ((uint32_t)0x00000001)
+#define RCC_LSE_BYPASS ((uint32_t)0x00000005)
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint32_t)0x00000000)
+#define RCC_HSI_ON ((uint32_t)0x00000001)
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint32_t)0x00000000)
+#define RCC_LSI_ON ((uint32_t)0x00000001)
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint32_t)0x00000000)
+#define RCC_PLL_OFF ((uint32_t)0x00000001)
+#define RCC_PLL_ON ((uint32_t)0x00000002)
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Multiplication_Factor
+ * @{
+ */
+#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
+#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
+#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
+#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
+#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
+#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
+#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
+#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
+#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
+#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
+#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
+#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
+#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
+#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
+#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
+
+#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLL_MUL2) || ((MUL) == RCC_PLL_MUL3) || \
+ ((MUL) == RCC_PLL_MUL4) || ((MUL) == RCC_PLL_MUL5) || \
+ ((MUL) == RCC_PLL_MUL6) || ((MUL) == RCC_PLL_MUL7) || \
+ ((MUL) == RCC_PLL_MUL8) || ((MUL) == RCC_PLL_MUL9) || \
+ ((MUL) == RCC_PLL_MUL10) || ((MUL) == RCC_PLL_MUL11) || \
+ ((MUL) == RCC_PLL_MUL12) || ((MUL) == RCC_PLL_MUL13) || \
+ ((MUL) == RCC_PLL_MUL14) || ((MUL) == RCC_PLL_MUL15) || \
+ ((MUL) == RCC_PLL_MUL16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008)
+
+#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+
+#define IS_RCC_SYSCLK_DIV(DIV) (((DIV) == RCC_SYSCLK_DIV1) || ((DIV) == RCC_SYSCLK_DIV2) || \
+ ((DIV) == RCC_SYSCLK_DIV4) || ((DIV) == RCC_SYSCLK_DIV8) || \
+ ((DIV) == RCC_SYSCLK_DIV16) || ((DIV) == RCC_SYSCLK_DIV64) || \
+ ((DIV) == RCC_SYSCLK_DIV128) || ((DIV) == RCC_SYSCLK_DIV256) || \
+ ((DIV) == RCC_SYSCLK_DIV512))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+
+#define IS_RCC_HCLK_DIV(DIV) (((DIV) == RCC_HCLK_DIV1) || ((DIV) == RCC_HCLK_DIV2) || \
+ ((DIV) == RCC_HCLK_DIV4) || ((DIV) == RCC_HCLK_DIV8) || \
+ ((DIV) == RCC_HCLK_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NONE RCC_BDCR_RTCSEL_NOCLOCK
+#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE
+#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI
+#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE
+
+#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_NONE) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USART2_Clock_Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USART3_Clock_Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI
+
+#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2C1_Clock_Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
+
+#define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Index
+ * @{
+ */
+#define RCC_MCO ((uint32_t)0x00000000)
+
+#define IS_RCC_MCO(MCOx) ((MCOx) == RCC_MCO)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Clock_Source
+ * @{
+ */
+#define RCC_MCOSOURCE_NONE RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_CFGR_MCO_LSI
+#define RCC_MCOSOURCE_LSE RCC_CFGR_MCO_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_CFGR_MCO_HSI
+#define RCC_MCOSOURCE_HSE RCC_CFGR_MCO_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint32_t)0x00000001)
+#define RCC_IT_LSERDY ((uint32_t)0x00000002)
+#define RCC_IT_HSIRDY ((uint32_t)0x00000004)
+#define RCC_IT_HSERDY ((uint32_t)0x00000008)
+#define RCC_IT_PLLRDY ((uint32_t)0x00000010)
+#define RCC_IT_CSS ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+#define CR_REG_INDEX 1U
+#define BDCR_REG_INDEX 2U
+#define CSR_REG_INDEX 3U
+
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint32_t)((CR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CR_HSIRDY))))
+#define RCC_FLAG_HSERDY ((uint32_t)((CR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CR_HSERDY))))
+#define RCC_FLAG_PLLRDY ((uint32_t)((CR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CR_PLLRDY))))
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint32_t)((BDCR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_BDCR_LSERDY))))
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_LSIRDY))))
+#define RCC_FLAG_RMV ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_RMVF))))
+#define RCC_FLAG_OBLRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_OBLRSTF))))
+#define RCC_FLAG_PINRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_PINRSTF))))
+#define RCC_FLAG_PORRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_PORRSTF))))
+#define RCC_FLAG_SFTRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_SFTRSTF))))
+#define RCC_FLAG_IWDGRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_IWDGRSTF))))
+#define RCC_FLAG_WWDGRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_WWDGRSTF))))
+#define RCC_FLAG_LPWRRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_LPWRRSTF))))
+/**
+ * @}
+ */
+
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __GPIOA_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOAEN))
+#define __GPIOB_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOBEN))
+#define __GPIOC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOCEN))
+#define __GPIOD_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIODEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOFEN))
+#define __CRC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_CRCEN))
+#define __DMA1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA1EN))
+#define __SRAM_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_SRAMEN))
+#define __FLITF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_FLITFEN))
+#define __TSC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_TSCEN))
+
+#define __GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
+#define __GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
+#define __GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
+#define __GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+#define __GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
+#define __CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
+#define __DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
+#define __SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
+#define __FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+#define __TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM2EN))
+#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
+#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
+#define __I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
+#define __PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
+#define __DAC1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DAC1EN))
+
+#define __TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+#define __DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC1EN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
+#define __TIM15_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM15EN))
+#define __TIM16_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM16EN))
+#define __TIM17_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM17EN))
+#define __USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
+
+#define __SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+#define __TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+
+/** @brief Force or release AHB peripheral reset.
+ */
+#define __AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
+#define __GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
+#define __GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
+#define __GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
+#define __GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+#define __GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
+#define __TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
+#define __GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
+#define __GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
+#define __GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
+#define __GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+#define __GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+#define __TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+#define __DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC1RST))
+
+#define __APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
+#define __TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+#define __DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC1RST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+#define __TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+#define __USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+
+#define __APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
+#define __SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+#define __TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#define __USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *)CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *)CR_HSION_BB = DISABLE)
+
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \
+ MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM))
+
+
+/** @brief Macro to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *)CSR_LSION_BB = ENABLE)
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *)CSR_LSION_BB = DISABLE)
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the Clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *)CR_BYTE2_ADDRESS = (__STATE__))
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSEPredivValue__: specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSEPredivValue__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSEPredivValue__))
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEON|RCC_BDCR_LSEBYP, (uint32_t)(__STATE__))
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ * @param __I2C1CLKSource__: specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSource__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ * @param __USART1CLKSource__: specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK2 or RCC_USART1CLKSOURCE_PCLK1: PCLK2 or PCLK1 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSource__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK2 or RCC_USART1CLKSOURCE_PCLK1: PCLK2 or PCLK1 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSource__: specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ * @param __USART3CLKSource__: specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSource__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+
+/** @brief Macros to enable or disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *)BDCR_RTCEN_BB = ENABLE)
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *)BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macro to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32
+ *
+ * @note If the LSE is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
+ * the RTC cannot be used in STOP and STANDBY modes.
+ * @note The system must always be configured so as to get a PCLK frequency greater than or
+ * equal to the RTCCLK frequency for a proper operation of the RTC.
+ */
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) \
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (uint32_t)(__RTCCLKSource__))
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected as RTC clock
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
+
+/** @brief Macro to force or release the Backup domain reset.
+ * @note These macros reset the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *)BDCR_BDRST_BB = ENABLE)
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *)BDCR_BDRST_BB = DISABLE)
+
+/** @brief Macro to enable or disable the PLL.
+ * @note After enabling the PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The PLL can not be disabled if it is used as system clock source
+ * @note The PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *)CR_PLLON_BB = ENABLE)
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *)CR_PLLON_BB = DISABLE)
+
+/** @brief Macro to configure the PLL clock source and multiplication factor.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @param __PLLMUL__: specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PLLMUL__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__)))
+
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock.
+ * The returned value can be one of the following value:
+ * @arg RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock
+ * @arg RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock
+ * @arg RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
+
+/** @defgroup RCC_Flags_Interrupts_Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to enable
+ * the selected interrupts.).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt enable
+ * @arg RCC_IT_LSERDY: LSE ready interrupt enable
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt enable
+ * @arg RCC_IT_HSERDY: HSE ready interrupt enable
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt enable
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to disable
+ * the selected interrupts.).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDYIE: LSI ready interrupt enable
+ * @arg RCC_IT_LSERDYIE: LSE ready interrupt enable
+ * @arg RCC_IT_HSIRDYIE: HSI ready interrupt enable
+ * @arg RCC_IT_HSERDYIE: HSE ready interrupt enable
+ * @arg RCC_IT_PLLRDYIE: PLL ready interrupt enable
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief Clear the RCC's interrupt pending bits ( Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __IT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDYC: LSI ready interrupt clear
+ * @arg RCC_IT_LSERDYC: LSE ready interrupt clear
+ * @arg RCC_IT_HSIRDYC: HSI ready interrupt clear
+ * @arg RCC_IT_HSERDYC: HSE ready interrupt clear
+ * @arg RCC_IT_PLLRDYC: PLL ready interrupt clear
+ * @arg RCC_IT_CSSC: Clock Security System interrupt clear
+ */
+#define __HAL_RCC_CLEAR_IT(__IT__) (*(__IO uint8_t *)CIR_BYTE2_ADDRESS = (__IT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __IT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDYF: LSI ready interrupt flag
+ * @arg RCC_IT_LSERDYF: LSE ready interrupt flag
+ * @arg RCC_IT_HSIRDYF: HSI ready interrupt flag
+ * @arg RCC_IT_HSERDYF: HSE ready interrupt flag
+ * @arg RCC_IT_PLLRDYF: PLL ready interrupt flag
+ * @arg RCC_IT_CSSF: Clock Security System interrupt flag
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__IT__) ((RCC->CIR & (__IT__)) == (__IT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (*(__IO uint32_t *)CSR_RMVF_BB = ENABLE)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_OBLRST: Option Byte Load reset
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint32_t)0x0000001F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \
+ ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \
+ RCC->CSR)) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))
+
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extension module */
+#include "stm32f3xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ***************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/* Peripheral Control functions *********************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CCSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_rcc_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,2212 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_EX_H
+#define __STM32F3xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303xC */
+
+#if defined(STM32F358xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Hrtim1ClockSelection; /*!< HRTIM1 clock source
+ This parameter can be a value of @ref RCCEx_HRTIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F378xx */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00008000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00080000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x00100000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00008000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00080000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x00100000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17))
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_ADC34 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_TIM8 ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F303xC */
+
+#if defined(STM32F358xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_ADC34 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_TIM8 ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_HRTIM1 ((uint32_t)0x00004000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_HRTIM1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_SDADC ((uint32_t)0x00000800)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_SDADC ((uint32_t)0x00000800)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_HSI RCC_CFGR3_I2C3SW_HSI
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CFGR3_I2C3SW_SYSCLK
+
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source
+ * @{
+ */
+#define RCC_ADC1PLLCLK_OFF RCC_CFGR2_ADC1PRES_NO
+#define RCC_ADC1PLLCLK_DIV1 RCC_CFGR2_ADC1PRES_DIV1
+#define RCC_ADC1PLLCLK_DIV2 RCC_CFGR2_ADC1PRES_DIV2
+#define RCC_ADC1PLLCLK_DIV4 RCC_CFGR2_ADC1PRES_DIV4
+#define RCC_ADC1PLLCLK_DIV6 RCC_CFGR2_ADC1PRES_DIV6
+#define RCC_ADC1PLLCLK_DIV8 RCC_CFGR2_ADC1PRES_DIV8
+#define RCC_ADC1PLLCLK_DIV10 RCC_CFGR2_ADC1PRES_DIV10
+#define RCC_ADC1PLLCLK_DIV12 RCC_CFGR2_ADC1PRES_DIV12
+#define RCC_ADC1PLLCLK_DIV16 RCC_CFGR2_ADC1PRES_DIV16
+#define RCC_ADC1PLLCLK_DIV32 RCC_CFGR2_ADC1PRES_DIV32
+#define RCC_ADC1PLLCLK_DIV64 RCC_CFGR2_ADC1PRES_DIV64
+#define RCC_ADC1PLLCLK_DIV128 RCC_CFGR2_ADC1PRES_DIV128
+#define RCC_ADC1PLLCLK_DIV256 RCC_CFGR2_ADC1PRES_DIV256
+
+#define IS_RCC_ADC1PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PLLCLK_OFF) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM15_Clock_Source
+ * @{
+ */
+#define RCC_TIM15CLK_HCLK RCC_CFGR3_TIM15SW_HCLK
+#define RCC_TIM15CLK_PLLCLK RCC_CFGR3_TIM15SW_PLL
+
+#define IS_RCC_TIM15CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM15CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM15CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM16_Clock_Source
+ * @{
+ */
+#define RCC_TIM16CLK_HCLK RCC_CFGR3_TIM16SW_HCLK
+#define RCC_TIM16CLK_PLLCLK RCC_CFGR3_TIM16SW_PLL
+
+#define IS_RCC_TIM16CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM16CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM16CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM17_Clock_Source
+ * @{
+ */
+#define RCC_TIM17CLK_HCLK RCC_CFGR3_TIM17SW_HCLK
+#define RCC_TIM17CLK_PLLCLK RCC_CFGR3_TIM17SW_PLL
+
+#define IS_RCC_TIM17CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM17CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM17CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source
+ * @{
+ */
+
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+/**
+ * @}
+ */
+/** @defgroup RCCEx_TIM1_Clock_Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 RCC_CFGR3_UART4SW_PCLK
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CFGR3_UART4SW_SYSCLK
+#define RCC_UART4CLKSOURCE_LSE RCC_CFGR3_UART4SW_LSE
+#define RCC_UART4CLKSOURCE_HSI RCC_CFGR3_UART4SW_HSI
+
+#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 RCC_CFGR3_UART5SW_PCLK
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CFGR3_UART5SW_SYSCLK
+#define RCC_UART5CLKSOURCE_LSE RCC_CFGR3_UART5SW_LSE
+#define RCC_UART5CLKSOURCE_HSI RCC_CFGR3_UART5SW_HSI
+
+#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC34_Clock_Source
+ * @{
+ */
+
+/* ADC3 & ADC4 */
+#define RCC_ADC34PLLCLK_OFF RCC_CFGR2_ADCPRE34_NO
+#define RCC_ADC34PLLCLK_DIV1 RCC_CFGR2_ADCPRE34_DIV1
+#define RCC_ADC34PLLCLK_DIV2 RCC_CFGR2_ADCPRE34_DIV2
+#define RCC_ADC34PLLCLK_DIV4 RCC_CFGR2_ADCPRE34_DIV4
+#define RCC_ADC34PLLCLK_DIV6 RCC_CFGR2_ADCPRE34_DIV6
+#define RCC_ADC34PLLCLK_DIV8 RCC_CFGR2_ADCPRE34_DIV8
+#define RCC_ADC34PLLCLK_DIV10 RCC_CFGR2_ADCPRE34_DIV10
+#define RCC_ADC34PLLCLK_DIV12 RCC_CFGR2_ADCPRE34_DIV12
+#define RCC_ADC34PLLCLK_DIV16 RCC_CFGR2_ADCPRE34_DIV16
+#define RCC_ADC34PLLCLK_DIV32 RCC_CFGR2_ADCPRE34_DIV32
+#define RCC_ADC34PLLCLK_DIV64 RCC_CFGR2_ADCPRE34_DIV64
+#define RCC_ADC34PLLCLK_DIV128 RCC_CFGR2_ADCPRE34_DIV128
+#define RCC_ADC34PLLCLK_DIV256 RCC_CFGR2_ADCPRE34_DIV256
+
+#define IS_RCC_ADC34PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC34PLLCLK_OFF) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM8_Clock_Source
+ * @{
+ */
+#define RCC_TIM8CLK_HCLK RCC_CFGR3_TIM8SW_HCLK
+#define RCC_TIM8CLK_PLLCLK RCC_CFGR3_TIM8SW_PLL
+
+#define IS_RCC_TIM8CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM8CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM8CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source
+ * @{
+ */
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+
+/** @defgroup RCCEx_HRTIM1_Clock_Source
+ * @{
+ */
+#define RCC_HRTIM1CLK_HCLK RCC_CFGR3_HRTIM1SW_HCLK
+#define RCC_HRTIM1CLK_PLLCLK RCC_CFGR3_HRTIM1SW_PLL
+
+#define IS_RCC_HRTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_HRTIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_HRTIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source
+ * @{
+ */
+
+/* ADC1 */
+#define RCC_ADC1PCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2
+#define RCC_ADC1PCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4
+#define RCC_ADC1PCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6
+#define RCC_ADC1PCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8
+
+#define IS_RCC_ADC1PCLK2_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PCLK2_DIV2) || ((ADCCLK) == RCC_ADC1PCLK2_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PCLK2_DIV6) || ((ADCCLK) == RCC_ADC1PCLK2_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDADC_Clock_Prescaler
+ * @{
+ */
+#define RCC_SDADCSYSCLK_DIV1 RCC_CFGR_SDADCPRE_DIV1
+#define RCC_SDADCSYSCLK_DIV2 RCC_CFGR_SDADCPRE_DIV2
+#define RCC_SDADCSYSCLK_DIV4 RCC_CFGR_SDADCPRE_DIV4
+#define RCC_SDADCSYSCLK_DIV6 RCC_CFGR_SDADCPRE_DIV6
+#define RCC_SDADCSYSCLK_DIV8 RCC_CFGR_SDADCPRE_DIV8
+#define RCC_SDADCSYSCLK_DIV10 RCC_CFGR_SDADCPRE_DIV10
+#define RCC_SDADCSYSCLK_DIV12 RCC_CFGR_SDADCPRE_DIV12
+#define RCC_SDADCSYSCLK_DIV14 RCC_CFGR_SDADCPRE_DIV14
+#define RCC_SDADCSYSCLK_DIV16 RCC_CFGR_SDADCPRE_DIV16
+#define RCC_SDADCSYSCLK_DIV20 RCC_CFGR_SDADCPRE_DIV20
+#define RCC_SDADCSYSCLK_DIV24 RCC_CFGR_SDADCPRE_DIV24
+#define RCC_SDADCSYSCLK_DIV28 RCC_CFGR_SDADCPRE_DIV28
+#define RCC_SDADCSYSCLK_DIV32 RCC_CFGR_SDADCPRE_DIV32
+#define RCC_SDADCSYSCLK_DIV36 RCC_CFGR_SDADCPRE_DIV36
+#define RCC_SDADCSYSCLK_DIV40 RCC_CFGR_SDADCPRE_DIV40
+#define RCC_SDADCSYSCLK_DIV44 RCC_CFGR_SDADCPRE_DIV44
+#define RCC_SDADCSYSCLK_DIV48 RCC_CFGR_SDADCPRE_DIV48
+
+#define IS_RCC_SDADCSYSCLK_DIV(DIV) (((DIV) == RCC_SDADCSYSCLK_DIV1) || ((DIV) == RCC_SDADCSYSCLK_DIV2) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV4) || ((DIV) == RCC_SDADCSYSCLK_DIV6) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV8) || ((DIV) == RCC_SDADCSYSCLK_DIV10) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV12) || ((DIV) == RCC_SDADCSYSCLK_DIV14) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV16) || ((DIV) == RCC_SDADCSYSCLK_DIV20) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV24) || ((DIV) == RCC_SDADCSYSCLK_DIV28) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV32) || ((DIV) == RCC_SDADCSYSCLK_DIV36) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV40) || ((DIV) == RCC_SDADCSYSCLK_DIV44) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV48))
+/**
+ * @}
+ */
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F373xC)
+/** @defgroup RCCEx_USB_Clock_Source
+ * @{
+ */
+#define RCC_USBPLLCLK_DIV1 RCC_CFGR_USBPRE_DIV1
+#define RCC_USBPLLCLK_DIV1_5 RCC_CFGR_USBPRE_DIV1_5
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBPLLCLK_DIV1) || \
+ ((SOURCE) == RCC_USBPLLCLK_DIV1_5))
+/**
+ * @}
+ */
+
+#endif /* STM32F302x8 || STM32F302xC || STM32F303xC || STM32F373xC */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_MCOx_Clock_Prescaler
+ * @{
+ */
+#define RCC_MCO_NODIV ((uint32_t)0x00000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_NODIV))
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler
+ * @{
+ */
+#define RCC_MCO_DIV1 ((uint32_t)0x00000000)
+#define RCC_MCO_DIV2 ((uint32_t)0x10000000)
+#define RCC_MCO_DIV4 ((uint32_t)0x20000000)
+#define RCC_MCO_DIV8 ((uint32_t)0x30000000)
+#define RCC_MCO_DIV16 ((uint32_t)0x40000000)
+#define RCC_MCO_DIV32 ((uint32_t)0x50000000)
+#define RCC_MCO_DIV64 ((uint32_t)0x60000000)
+#define RCC_MCO_DIV128 ((uint32_t)0x70000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_DIV1) || ((DIV) == RCC_MCO_DIV2) || \
+ ((DIV) == RCC_MCO_DIV4) || ((DIV) == RCC_MCO_DIV8) || \
+ ((DIV) == RCC_MCO_DIV16) || ((DIV) == RCC_MCO_DIV32) || \
+ ((DIV) == RCC_MCO_DIV64) || ((DIV) == RCC_MCO_DIV128))
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __ADC1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC1EN))
+
+#define __ADC1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC1EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __DMA2_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
+#define __ADC12_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_ENABLE() __ADC12_CLK_ENABLE()
+#define __ADC2_CLK_ENABLE() __ADC12_CLK_ENABLE()
+
+#define __DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#define __ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#define __ADC2_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __ADC34_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC34EN))
+
+#define __ADC34_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC34EN))
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __ADC12_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_ENABLE() __ADC12_CLK_ENABLE()
+#define __ADC2_CLK_ENABLE() __ADC12_CLK_ENABLE()
+
+#define __ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#define __ADC2_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __DMA2_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
+
+#define __DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C3EN))
+
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __DAC2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DAC2EN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM5EN))
+#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __TIM18_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM18EN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+#define __DAC2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DAC2EN))
+#define __CEC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CECEN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __TIM18_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM18EN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#define __CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#endif /* STM32F303x8 || STM32F303xC || STM32F358xx || STM32F334x8 || STM32F328xx || STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC)
+#define __USB_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USBEN))
+
+#define __USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+#endif /* STM32F302x8 || STM32F302xC || STM32F303xC|| STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __CAN_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CANEN))
+
+#define __CAN_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+#endif /* STM32F301x8*/
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
+
+#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HRTIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_HRTIM1EN))
+
+#define __HRTIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_HRTIM1EN))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+#define __TIM19_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM19EN))
+#define __SDADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC1EN))
+#define __SDADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC2EN))
+#define __SDADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC3EN))
+
+#define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __TIM19_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM19EN))
+#define __SDADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC1EN))
+#define __SDADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC2EN))
+#define __SDADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC3EN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
+
+#define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/** @brief Force or release AHB peripheral reset.
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __ADC1_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC1RST))
+
+#define __ADC1_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC1RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+#define __ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_FORCE_RESET() __ADC12_FORCE_RESET()
+#define __ADC2_FORCE_RESET() __ADC12_FORCE_RESET()
+
+#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#define __ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#define __ADC2_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __ADC34_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC34RST))
+
+#define __ADC34_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC34RST))
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_FORCE_RESET() __ADC12_FORCE_RESET()
+#define __ADC2_FORCE_RESET() __ADC12_FORCE_RESET()
+
+#define __ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#define __ADC2_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#endif /* STM32F373xC || STM32F378xx */
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __TIM18_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM18RST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+#define __CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __TIM18_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM18RST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#define __CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303x8) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#endif /* STM32F303x8 || STM32F303xC || STM32F358xx || STM32F334x8 || STM32F328xx || STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || \
+ defined(STM32F303xC) || defined(STM32F373xC)
+#define __USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+#endif /* STM32F302x8 || STM32F302xC || STM32F303xC|| STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __CAN_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __CAN_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+#endif /* STM32F301x8*/
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+
+#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HRTIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_HRTIM1RST))
+
+#define __HRTIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_HRTIM1RST))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __TIM19_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM19RST))
+#define __SDADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC1RST))
+#define __SDADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC2RST))
+#define __SDADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC3RST))
+
+#define __ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __TIM19_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM19RST))
+#define __SDADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC1RST))
+#define __SDADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC2RST))
+#define __SDADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC3RST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+
+#define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ * @param __I2C3CLKSource__: specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C3SW, (uint32_t)(__I2C3CLKSource__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C3SW)))
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+/** @brief Macro to configure the TIM15 clock (TIM15CLK).
+ * @param __TIM15CLKSource__: specifies the TIM15 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM15CLKSOURCE_HCLK: HCLK selected as TIM15 clock
+ * @arg RCC_TIM15CLKSOURCE_PLL: PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_TIM15_CONFIG(__TIM15CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM15SW, (uint32_t)(__TIM15CLKSource__))
+
+/** @brief Macro to get the TIM15 clock (TIM15CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM15CLKSOURCE_HCLK: HCLK selected as TIM15 clock
+ * @arg RCC_TIM15CLKSOURCE_PLL: PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM15SW)))
+
+/** @brief Macro to configure the TIM16 clock (TIM16CLK).
+ * @param __TIM16CLKSource__: specifies the TIM16 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM16CLKSOURCE_HCLK: HCLK selected as TIM16 clock
+ * @arg RCC_TIM16CLKSOURCE_PLL: PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_TIM16_CONFIG(__TIM16CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM16SW, (uint32_t)(__TIM16CLKSource__))
+
+/** @brief Macro to get the TIM16 clock (TIM16CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM16CLKSOURCE_HCLK: HCLK selected as TIM16 clock
+ * @arg RCC_TIM16CLKSOURCE_PLL: PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_GET_TIM16_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM16SW)))
+
+/** @brief Macro to configure the TIM17 clock (TIM17CLK).
+ * @param __TIM17CLKSource__: specifies the TIM17 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM17CLKSOURCE_HCLK: HCLK selected as TIM17 clock
+ * @arg RCC_TIM17CLKSOURCE_PLL: PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_TIM17_CONFIG(__TIM17CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM17SW, (uint32_t)(__TIM17CLKSource__))
+
+/** @brief Macro to get the TIM17 clock (TIM17CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM17CLKSOURCE_HCLK: HCLK selected as TIM17 clock
+ * @arg RCC_TIM17CLKSOURCE_PLL: PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_GET_TIM17_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM17SW)))
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__: specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC1PLLCLK_OFF: ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg RCC_ADC1PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADC1PRES, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC1PLLCLK_OFF: ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg RCC_ADC1PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADC1PRES)))
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__: specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+
+/** @brief Macro to configure the UART4 clock (UART4CLK).
+ * @param __UART4CLKSource__: specifies the UART4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_UART4_CONFIG(__UART4CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART4SW, (uint32_t)(__UART4CLKSource__))
+
+/** @brief Macro to get the UART4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART4SW)))
+
+/** @brief Macro to configure the UART5 clock (UART5CLK).
+ * @param __UART5CLKSource__: specifies the UART5 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_UART5_CONFIG(__UART5CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART5SW, (uint32_t)(__UART5CLKSource__))
+
+/** @brief Macro to get the UART5 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART5SW)))
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @brief Macro to configure the ADC3 & ADC4 clock (ADC34CLK).
+ * @param __ADC34CLKSource__: specifies the ADC3 & ADC4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC34PLLCLK_OFF: ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg RCC_ADC34PLLCLK_DIV1: PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV2: PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV4: PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV6: PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV8: PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV10: PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV12: PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV16: PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV32: PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV64: PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV128: PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV256: PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_ADC34_CONFIG(__ADC34CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE34, (uint32_t)(__ADC34CLKSource__))
+
+/** @brief Macro to get the ADC3 & ADC4 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC34PLLCLK_OFF: ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg RCC_ADC34PLLCLK_DIV1: PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV2: PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV4: PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV6: PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV8: PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV10: PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV12: PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV16: PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV32: PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV64: PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV128: PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV256: PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_GET_ADC34_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE34)))
+
+/** @brief Macro to configure the TIM8 clock (TIM8CLK).
+ * @param __TIM8CLKSource__: specifies the TIM8 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM8CLKSOURCE_HCLK: HCLK selected as TIM8 clock
+ * @arg RCC_TIM8CLKSOURCE_PLL: PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_TIM8_CONFIG(__TIM8CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM8SW, (uint32_t)(__TIM8CLKSource__))
+
+/** @brief Macro to get the TIM8 clock (TIM8CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM8CLKSOURCE_HCLK: HCLK selected as TIM8 clock
+ * @arg RCC_TIM8CLKSOURCE_PLL: PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_GET_TIM8_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM8SW)))
+
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__: specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+
+/** @brief Macro to configure the HRTIM1 clock.
+ * @param __HRTIM1CLKSource__: specifies the HRTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_HRTIM1CLKSOURCE_HCLK: HCLK selected as HRTIM1 clock
+ * @arg RCC_HRTIM1CLKSOURCE_PLL: PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_HRTIM1_CONFIG(__HRTIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_HRTIM1SW, (uint32_t)(__HRTIM1CLKSource__))
+
+/** @brief Macro to get the HRTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_HRTIM1CLKSOURCE_HCLK: HCLK selected as HRTIM1 clock
+ * @arg RCC_HRTIM1CLKSOURCE_PLL: PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_GET_HRTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_HRTIM1SW)))
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__: specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC1PCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock (ADC1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC1PCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE)))
+
+/** @brief Macro to configure the SDADCx clock (SDADCxCLK).
+ * @param __SDADCPrescaler__: specifies the SDADCx system clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDADCSYSCLK_DIV1: SYSCLK clock selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV2: SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV4: SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV6: SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV8: SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV10: SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV12: SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV14: SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV16: SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV20: SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV24: SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV28: SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV32: SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV36: SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV40: SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV44: SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV48: SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_SDADC_CONFIG(__SDADCPrescaler__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SDADCPRE, (uint32_t)(__SDADCPrescaler__))
+
+/** @brief Macro to get the SDADCx clock prescaler.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDADCSYSCLK_DIV1: SYSCLK clock selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV2: SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV4: SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV6: SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV8: SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV10: SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV12: SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV14: SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV16: SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV20: SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV24: SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV28: SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV32: SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV36: SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV40: SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV44: SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV48: SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_GET_SDADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SDADCPRE)))
+
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSource__: specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSource__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302x8) || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F373xC)
+
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSource__: specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV1: PLL Clock divided by 1 selected as USB clock
+ * @arg RCC_USBPLLCLK_DIV1_5: PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSource__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV1: PLL Clock divided by 1 selected as USB clock
+ * @arg RCC_USBPLLCLK_DIV1_5: PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE)))
+
+#endif /* STM32F302x8 || STM32F302xC || STM32F303xC || STM32F373xC */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @brief macro to configure the MCO clock.
+ * @param __MCOCLKSource__: specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCOSOURCE_HSI: HSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSE: HSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSI: LSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSE: LSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: PLLCLK Divided by 2 selected as MCO clock
+ * @arg RCC_MCOSOURCE_SYSCLK: System Clock selected as MCO clock
+ * @param __MCODiv__: specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO_NODIV: No division applied on MCO clock source
+ */
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSource__) | (__MCODiv__)))
+#else
+
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSource__))
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_rtc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,751 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RTC_H
+#define __STM32F3xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */
+
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTCEx_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC Time SubSeconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief Time Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants
+ * @{
+ */
+
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F)
+#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
+ RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
+ RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
+
+#define RTC_TIMEOUT_VALUE 1000
+
+/** @defgroup RTC_Hour_Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040)
+
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000)
+
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000)
+
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Asynchronous_Predivider
+ * @{
+ */
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F)
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_Synchronous_Predivider
+ * @{
+ */
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Time_Definitions
+ * @{
+ */
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000)
+
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000)
+
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions
+ * @{
+ */
+#define FORMAT_BIN ((uint32_t)0x000000000)
+#define FORMAT_BCD ((uint32_t)0x000000001)
+
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == FORMAT_BIN) || ((FORMAT) == FORMAT_BCD))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Year_Date_Definitions
+ * @{
+ */
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions
+ * @{
+ */
+
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
+#define RTC_MONTH_MARCH ((uint8_t)0x03)
+#define RTC_MONTH_APRIL ((uint8_t)0x04)
+#define RTC_MONTH_MAY ((uint8_t)0x05)
+#define RTC_MONTH_JUNE ((uint8_t)0x06)
+#define RTC_MONTH_JULY ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
+
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
+
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Definitions
+ * @{
+ */
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000)
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_AlarmMask_Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080)
+
+#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+#define RTC_ALARM_B RTC_CR_ALRBE
+
+#define IS_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Value
+ * @{
+ */
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_None))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000)
+#define RTC_IT_WUT ((uint32_t)0x00004000)
+#define RTC_IT_ALRB ((uint32_t)0x00002000)
+#define RTC_IT_ALRA ((uint32_t)0x00001000)
+#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000)
+#define RTC_IT_TAMP3 ((uint32_t)0x00080000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
+#define RTC_FLAG_TAMP3F ((uint32_t)0x00008000)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400)
+#define RTC_FLAG_ALRBF ((uint32_t)0x00000200)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
+#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCA; \
+ (__HANDLE__)->Instance->WPR = 0x53; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFF; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+ * @brief Disable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __FLAG__) ((((((__HANDLE__)->Instance->ISR)& ((__FLAG__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @arg RTC_FLAG_ALRAWF
+ * @arg RTC_FLAG_ALRBWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
+
+/**
+ * @brief Enable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+/**
+ * @brief Disable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @brief Clear the RTC Exti flags.
+ * @param __FLAG__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+
+/* Include RTC HAL Extension module */
+#include "stm32f3xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_rtc_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,660 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RTC_EX_H
+#define __STM32F3xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Output_selection_Definitions
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
+#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
+
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMB) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004)
+#define RTC_BKP_DR5 ((uint32_t)0x00000005)
+#define RTC_BKP_DR6 ((uint32_t)0x00000006)
+#define RTC_BKP_DR7 ((uint32_t)0x00000007)
+#define RTC_BKP_DR8 ((uint32_t)0x00000008)
+#define RTC_BKP_DR9 ((uint32_t)0x00000009)
+#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
+#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
+#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
+#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
+#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
+#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define RTC_BKP_DR16 ((uint32_t)0x00000010)
+#define RTC_BKP_DR17 ((uint32_t)0x00000011)
+#define RTC_BKP_DR18 ((uint32_t)0x00000012)
+#define RTC_BKP_DR19 ((uint32_t)0x00000013)
+#define RTC_BKP_DR20 ((uint32_t)0x00000014)
+#define RTC_BKP_DR21 ((uint32_t)0x00000015)
+#define RTC_BKP_DR22 ((uint32_t)0x00000016)
+#define RTC_BKP_DR23 ((uint32_t)0x00000017)
+#define RTC_BKP_DR24 ((uint32_t)0x00000018)
+#define RTC_BKP_DR25 ((uint32_t)0x00000019)
+#define RTC_BKP_DR26 ((uint32_t)0x0000001A)
+#define RTC_BKP_DR27 ((uint32_t)0x0000001B)
+#define RTC_BKP_DR28 ((uint32_t)0x0000001C)
+#define RTC_BKP_DR29 ((uint32_t)0x0000001D)
+#define RTC_BKP_DR30 ((uint32_t)0x0000001E)
+#define RTC_BKP_DR31 ((uint32_t)0x0000001F)
+#endif /* STM32F373xC || STM32F378xx */
+
+#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+#define RTC_TAMPER_3 RTC_TAFCR_TAMP3E
+
+#define IS_TAMPER(TAMPER) (((TAMPER) == RTC_TAMPER_1) || \
+ ((TAMPER) == RTC_TAMPER_2) || \
+ ((TAMPER) == RTC_TAMPER_3))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+
+#define IS_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
+ consecutive samples at the active level. */
+
+#define IS_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+
+#define IS_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+
+#define IS_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
+
+#define IS_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 8s, else 2exp18 RTCCLK seconds */
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions
+ * @{
+ */
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
+
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value
+ * @{
+ */
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
+
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+/* Extension Control functions ************************************************/
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+
+/* Extension RTC features functions *******************************************/
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_sdadc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,531 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_sdadc.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief This file contains all the functions prototypes for the SDADC
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_SDADC_H
+#define __STM32F3xx_SDADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SDADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL SDADC States definition
+ */
+typedef enum
+{
+ HAL_SDADC_STATE_RESET = 0x00, /*!< SDADC not initialized */
+ HAL_SDADC_STATE_READY = 0x01, /*!< SDADC initialized and ready for use */
+ HAL_SDADC_STATE_CALIB = 0x02, /*!< SDADC calibration in progress */
+ HAL_SDADC_STATE_REG = 0x03, /*!< SDADC regular conversion in progress */
+ HAL_SDADC_STATE_INJ = 0x04, /*!< SDADC injected conversion in progress */
+ HAL_SDADC_STATE_REG_INJ = 0x05, /*!< SDADC regular and injected conversions in progress */
+ HAL_SDADC_STATE_ERROR = 0xFF, /*!< SDADC state error */
+}HAL_SDADC_StateTypeDef;
+
+/**
+ * @brief SDADC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t IdleLowPowerMode; /*!< Specifies if SDADC can enter in power down or standby when idle.
+ This parameter can be a value of @ref SDADC_Idle_Low_Power_Mode */
+ uint32_t FastConversionMode; /*!< Specifies if Fast conversion mode is enabled or not.
+ This parameter can be a value of @ref SDADC_Fast_Conv_Mode */
+ uint32_t SlowClockMode; /*!< Specifies if slow clock mode is enabled or not.
+ This parameter can be a value of @ref SDADC_Slow_Clock_Mode */
+ uint32_t ReferenceVoltage; /*!< Specifies the reference voltage.
+ This parameter can be a value of @ref SDADC_Reference_Voltage */
+}SDADC_InitTypeDef;
+
+/**
+ * @brief SDADC handle Structure definition
+ */
+typedef struct
+{
+ SDADC_TypeDef *Instance; /*!< SDADC registers base address */
+ SDADC_InitTypeDef Init; /*!< SDADC init parameters */
+ DMA_HandleTypeDef *hdma; /*!< SDADC DMA Handle parameters */
+ uint32_t RegularContMode; /*!< Regular conversion continuous mode */
+ uint32_t InjectedContMode; /*!< Injected conversion continuous mode */
+ uint32_t InjectedChannelsNbr; /*!< Number of channels in injected sequence */
+ uint32_t InjConvRemaining; /*!< Injected conversion remaining */
+ uint32_t RegularTrigger; /*!< Current trigger used for regular conversion */
+ uint32_t InjectedTrigger; /*!< Current trigger used for injected conversion */
+ uint32_t ExtTriggerEdge; /*!< Rising, falling or both edges selected */
+ uint32_t RegularMultimode; /*!< current type of regular multimode */
+ uint32_t InjectedMultimode; /*!< Current type of injected multimode */
+ HAL_SDADC_StateTypeDef State; /*!< SDADC state */
+ uint32_t ErrorCode; /*!< SDADC Error code */
+}SDADC_HandleTypeDef;
+
+/**
+ * @brief SDADC Configuration Register Parameter Structure
+ */
+typedef struct
+{
+ uint32_t InputMode; /*!< Specifies the input mode (single ended, differential...)
+ This parameter can be any value of @ref SDADC_InputMode */
+ uint32_t Gain; /*!< Specifies the gain setting.
+ This parameter can be any value of @ref SDADC_Gain */
+ uint32_t CommonMode; /*!< Specifies the common mode setting (VSSA, VDDA, VDDA/2).
+ This parameter can be any value of @ref SDADC_CommonMode */
+ uint32_t Offset; /*!< Specifies the 12-bit offset value.
+ This parameter can be any value lower or equal to 0x00000FFF */
+}SDADC_ConfParamTypeDef;
+
+/** @defgroup SDADC_Idle_Low_Power_Mode
+ * @{
+ */
+#define SDADC_LOWPOWER_NONE ((uint32_t)0x00000000)
+#define SDADC_LOWPOWER_POWERDOWN SDADC_CR1_PDI
+#define SDADC_LOWPOWER_STANDBY SDADC_CR1_SBI
+#define IS_SDADC_LOWPOWER_MODE(LOWPOWER) (((LOWPOWER) == SDADC_LOWPOWER_NONE) || \
+ ((LOWPOWER) == SDADC_LOWPOWER_POWERDOWN) || \
+ ((LOWPOWER) == SDADC_LOWPOWER_STANDBY))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Fast_Conv_Mode
+ * @{
+ */
+#define SDADC_FAST_CONV_DISABLE ((uint32_t)0x00000000)
+#define SDADC_FAST_CONV_ENABLE SDADC_CR2_FAST
+#define IS_SDADC_FAST_CONV_MODE(FAST) (((FAST) == SDADC_FAST_CONV_DISABLE) || \
+ ((FAST) == SDADC_FAST_CONV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Slow_Clock_Mode
+ * @{
+ */
+#define SDADC_SLOW_CLOCK_DISABLE ((uint32_t)0x00000000)
+#define SDADC_SLOW_CLOCK_ENABLE SDADC_CR1_SLOWCK
+#define IS_SDADC_SLOW_CLOCK_MODE(MODE) (((MODE) == SDADC_SLOW_CLOCK_DISABLE) || \
+ ((MODE) == SDADC_SLOW_CLOCK_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Reference_Voltage
+ * @{
+ */
+#define SDADC_VREF_EXT ((uint32_t)0x00000000) /*!< The reference voltage is forced externally using VREF pin */
+#define SDADC_VREF_VREFINT1 SDADC_CR1_REFV_0 /*!< The reference voltage is forced internally to 1.22V VREFINT */
+#define SDADC_VREF_VREFINT2 SDADC_CR1_REFV_1 /*!< The reference voltage is forced internally to 1.8V VREFINT */
+#define SDADC_VREF_VDDA SDADC_CR1_REFV /*!< The reference voltage is forced internally to VDDA */
+#define IS_SDADC_VREF(VREF) (((VREF) == SDADC_VREF_EXT) || \
+ ((VREF) == SDADC_VREF_VREFINT1) || \
+ ((VREF) == SDADC_VREF_VREFINT2) || \
+ ((VREF) == SDADC_VREF_VDDA))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_ConfIndex
+ * @{
+ */
+
+#define SDADC_CONF_INDEX_0 ((uint32_t)0x00000000) /*!< Configuration 0 Register selected */
+#define SDADC_CONF_INDEX_1 ((uint32_t)0x00000001) /*!< Configuration 1 Register selected */
+#define SDADC_CONF_INDEX_2 ((uint32_t)0x00000002) /*!< Configuration 2 Register selected */
+
+#define IS_SDADC_CONF_INDEX(CONF) (((CONF) == SDADC_CONF_INDEX_0) || \
+ ((CONF) == SDADC_CONF_INDEX_1) || \
+ ((CONF) == SDADC_CONF_INDEX_2))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_InputMode
+ * @{
+ */
+#define SDADC_INPUT_MODE_DIFF ((uint32_t)0x00000000) /*!< Conversions are executed in differential mode */
+#define SDADC_INPUT_MODE_SE_OFFSET SDADC_CONF0R_SE0_0 /*!< Conversions are executed in single ended offset mode */
+#define SDADC_INPUT_MODE_SE_ZERO_REFERENCE SDADC_CONF0R_SE0 /*!< Conversions are executed in single ended zero-volt reference mode */
+
+#define IS_SDADC_INPUT_MODE(MODE) (((MODE) == SDADC_INPUT_MODE_DIFF) || \
+ ((MODE) == SDADC_INPUT_MODE_SE_OFFSET) || \
+ ((MODE) == SDADC_INPUT_MODE_SE_ZERO_REFERENCE))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Gain
+ * @{
+ */
+#define SDADC_GAIN_1 ((uint32_t)0x00000000) /*!< Gain equal to 1 */
+#define SDADC_GAIN_2 SDADC_CONF0R_GAIN0_0 /*!< Gain equal to 2 */
+#define SDADC_GAIN_4 SDADC_CONF0R_GAIN0_1 /*!< Gain equal to 4 */
+#define SDADC_GAIN_8 ((uint32_t)0x00300000) /*!< Gain equal to 8 */
+#define SDADC_GAIN_16 SDADC_CONF0R_GAIN0_2 /*!< Gain equal to 16 */
+#define SDADC_GAIN_32 ((uint32_t)0x00500000) /*!< Gain equal to 32 */
+#define SDADC_GAIN_1_2 SDADC_CONF0R_GAIN0 /*!< Gain equal to 1/2 */
+#define IS_SDADC_GAIN(GAIN) (((GAIN) == SDADC_GAIN_1) || \
+ ((GAIN) == SDADC_GAIN_2) || \
+ ((GAIN) == SDADC_GAIN_4) || \
+ ((GAIN) == SDADC_GAIN_8) || \
+ ((GAIN) == SDADC_GAIN_16) || \
+ ((GAIN) == SDADC_GAIN_32) || \
+ ((GAIN) == SDADC_GAIN_1_2))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_CommonMode
+ * @{
+ */
+#define SDADC_COMMON_MODE_VSSA ((uint32_t)0x00000000) /*!< Select SDADC VSSA as common mode */
+#define SDADC_COMMON_MODE_VDDA_2 SDADC_CONF0R_COMMON0_0 /*!< Select SDADC VDDA/2 as common mode */
+#define SDADC_COMMON_MODE_VDDA SDADC_CONF0R_COMMON0_1 /*!< Select SDADC VDDA as common mode */
+#define IS_SDADC_COMMON_MODE(MODE) (((MODE) == SDADC_COMMON_MODE_VSSA) || \
+ ((MODE) == SDADC_COMMON_MODE_VDDA_2) || \
+ ((MODE) == SDADC_COMMON_MODE_VDDA))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Offset
+ * @{
+ */
+#define IS_SDADC_OFFSET_VALUE(VALUE) ((VALUE) <= 0x00000FFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Channel_Selection
+ * @{
+ */
+
+/* SDADC Channels ------------------------------------------------------------*/
+/* The SDADC channels are defined as follows:
+ - in 16-bit LSB the channel mask is set
+ - in 16-bit MSB the channel number is set
+ e.g. for channel 5 definition:
+ - the channel mask is 0x00000020 (bit 5 is set)
+ - the channel number 5 is 0x00050000
+ --> Consequently, channel 5 definition is 0x00000020 | 0x00050000 = 0x00050020 */
+#define SDADC_CHANNEL_0 ((uint32_t)0x00000001)
+#define SDADC_CHANNEL_1 ((uint32_t)0x00010002)
+#define SDADC_CHANNEL_2 ((uint32_t)0x00020004)
+#define SDADC_CHANNEL_3 ((uint32_t)0x00030008)
+#define SDADC_CHANNEL_4 ((uint32_t)0x00040010)
+#define SDADC_CHANNEL_5 ((uint32_t)0x00050020)
+#define SDADC_CHANNEL_6 ((uint32_t)0x00060040)
+#define SDADC_CHANNEL_7 ((uint32_t)0x00070080)
+#define SDADC_CHANNEL_8 ((uint32_t)0x00080100)
+
+/* Just one channel of the 9 channels can be selected for regular conversion */
+#define IS_SDADC_REGULAR_CHANNEL(CHANNEL) (((CHANNEL) == SDADC_CHANNEL_0) || \
+ ((CHANNEL) == SDADC_CHANNEL_1) || \
+ ((CHANNEL) == SDADC_CHANNEL_2) || \
+ ((CHANNEL) == SDADC_CHANNEL_3) || \
+ ((CHANNEL) == SDADC_CHANNEL_4) || \
+ ((CHANNEL) == SDADC_CHANNEL_5) || \
+ ((CHANNEL) == SDADC_CHANNEL_6) || \
+ ((CHANNEL) == SDADC_CHANNEL_7) || \
+ ((CHANNEL) == SDADC_CHANNEL_8))
+
+/* Any or all of the 9 channels can be selected for injected conversion */
+#define IS_SDADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) != 0) && ((CHANNEL) <= 0x000F01FF))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_CalibrationSequence
+ * @{
+ */
+#define SDADC_CALIBRATION_SEQ_1 ((uint32_t)0x00000000) /*!< One calibration sequence to calculate offset of conf0 (OFFSET0[11:0]) */
+#define SDADC_CALIBRATION_SEQ_2 SDADC_CR2_CALIBCNT_0 /*!< Two calibration sequences to calculate offset of conf0 and conf1 (OFFSET0[11:0] and OFFSET1[11:0]) */
+#define SDADC_CALIBRATION_SEQ_3 SDADC_CR2_CALIBCNT_1 /*!< Three calibration sequences to calculate offset of conf0, conf1 and conf2 (OFFSET0[11:0], OFFSET1[11:0], and OFFSET2[11:0]) */
+
+#define IS_SDADC_CALIB_SEQUENCE(SEQUENCE) (((SEQUENCE) == SDADC_CALIBRATION_SEQ_1) || \
+ ((SEQUENCE) == SDADC_CALIBRATION_SEQ_2) || \
+ ((SEQUENCE) == SDADC_CALIBRATION_SEQ_3))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_ContinuousMode
+ * @{
+ */
+#define SDADC_CONTINUOUS_CONV_OFF ((uint32_t)0x00000000) /*!< Conversion are not continuous */
+#define SDADC_CONTINUOUS_CONV_ON ((uint32_t)0x00000001) /*!< Conversion are continuous */
+
+#define IS_SDADC_CONTINUOUS_MODE(MODE) (((MODE) == SDADC_CONTINUOUS_CONV_OFF) || \
+ ((MODE) == SDADC_CONTINUOUS_CONV_ON))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Trigger
+ * @{
+ */
+#define SDADC_SOFTWARE_TRIGGER ((uint32_t)0x00000000) /*!< Software trigger */
+#define SDADC_SYNCHRONOUS_TRIGGER ((uint32_t)0x00000001) /*!< Synchronous with SDADC1 (only for SDADC2 and SDADC3) */
+#define SDADC_EXTERNAL_TRIGGER ((uint32_t)0x00000002) /*!< External trigger */
+
+#define IS_SDADC_REGULAR_TRIGGER(TRIGGER) (((TRIGGER) == SDADC_SOFTWARE_TRIGGER) || \
+ ((TRIGGER) == SDADC_SYNCHRONOUS_TRIGGER))
+
+#define IS_SDADC_INJECTED_TRIGGER(TRIGGER) (((TRIGGER) == SDADC_SOFTWARE_TRIGGER) || \
+ ((TRIGGER) == SDADC_SYNCHRONOUS_TRIGGER) || \
+ ((TRIGGER) == SDADC_EXTERNAL_TRIGGER))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_InjectedExtTrigger
+ * @{
+ */
+#define SDADC_EXT_TRIG_TIM13_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM14_CC1 ((uint32_t)0x00000100) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM16_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM17_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM12_CC1 ((uint32_t)0x00000100) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM12_CC2 ((uint32_t)0x00000100) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM15_CC2 ((uint32_t)0x00000200) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM2_CC3 ((uint32_t)0x00000200) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM2_CC4 ((uint32_t)0x00000200) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM3_CC1 ((uint32_t)0x00000300) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM3_CC2 ((uint32_t)0x00000300) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM3_CC3 ((uint32_t)0x00000300) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM4_CC1 ((uint32_t)0x00000400) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM4_CC2 ((uint32_t)0x00000400) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM4_CC3 ((uint32_t)0x00000400) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM19_CC2 ((uint32_t)0x00000500) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM19_CC3 ((uint32_t)0x00000500) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM19_CC4 ((uint32_t)0x00000500) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_EXTI11 ((uint32_t)0x00000700) /*!< Trigger source for SDADC1, SDADC2 and SDADC3 */
+#define SDADC_EXT_TRIG_EXTI15 ((uint32_t)0x00000600) /*!< Trigger source for SDADC1, SDADC2 and SDADC3 */
+
+#define IS_SDADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == SDADC_EXT_TRIG_TIM13_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM14_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM16_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM17_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM12_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM12_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM15_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM2_CC3) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM2_CC4) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC3) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC3) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC3) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC4) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_EXTI11) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_EXTI15))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_ExtTriggerEdge
+ * @{
+ */
+#define SDADC_EXT_TRIG_RISING_EDGE SDADC_CR2_JEXTEN_0 /*!< External rising edge */
+#define SDADC_EXT_TRIG_FALLING_EDGE SDADC_CR2_JEXTEN_1 /*!< External falling edge */
+#define SDADC_EXT_TRIG_BOTH_EDGES SDADC_CR2_JEXTEN /*!< External rising and falling edges */
+
+#define IS_SDADC_EXT_TRIG_EDGE(TRIGGER) (((TRIGGER) == SDADC_EXT_TRIG_RISING_EDGE) || \
+ ((TRIGGER) == SDADC_EXT_TRIG_FALLING_EDGE) || \
+ ((TRIGGER) == SDADC_EXT_TRIG_BOTH_EDGES))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_InjectedDelay
+ * @{
+ */
+#define SDADC_INJECTED_DELAY_NONE ((uint32_t)0x00000000) /*!< No delay on injected conversion */
+#define SDADC_INJECTED_DELAY SDADC_CR2_JDS /*!< Delay on injected conversion */
+
+#define IS_SDADC_INJECTED_DELAY(DELAY) (((DELAY) == SDADC_INJECTED_DELAY_NONE) || \
+ ((DELAY) == SDADC_INJECTED_DELAY))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_MultimodeType
+ * @{
+ */
+#define SDADC_MULTIMODE_SDADC1_SDADC2 ((uint32_t)0x00000000) /*!< Get conversion values for SDADC1 and SDADC2 */
+#define SDADC_MULTIMODE_SDADC1_SDADC3 ((uint32_t)0x00000001) /*!< Get conversion values for SDADC1 and SDADC3 */
+
+#define IS_SDADC_MULTIMODE_TYPE(TYPE) (((TYPE) == SDADC_MULTIMODE_SDADC1_SDADC2) || \
+ ((TYPE) == SDADC_MULTIMODE_SDADC1_SDADC3))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_ErrorCode
+ * @{
+ */
+#define SDADC_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define SDADC_ERROR_REGULAR_OVERRUN ((uint32_t)0x00000001) /*!< Overrun occurs during regular conversion */
+#define SDADC_ERROR_INJECTED_OVERRUN ((uint32_t)0x00000002) /*!< Overrun occurs during injected conversion */
+#define SDADC_ERROR_DMA ((uint32_t)0x00000003) /*!< DMA error occurs */
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset SDADC handle state
+ * @param __HANDLE__: SDADC handle.
+ * @retval None
+ */
+#define __HAL_SDADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDADC_STATE_RESET)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_SDADC_Init(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_DeInit(SDADC_HandleTypeDef *hsdadc);
+void HAL_SDADC_MspInit(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_MspDeInit(SDADC_HandleTypeDef* hsdadc);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_SDADC_PrepareChannelConfig(SDADC_HandleTypeDef *hsdadc,
+ uint32_t ConfIndex,
+ SDADC_ConfParamTypeDef* ConfParamStruct);
+HAL_StatusTypeDef HAL_SDADC_AssociateChannelConfig(SDADC_HandleTypeDef *hsdadc,
+ uint32_t Channel,
+ uint32_t ConfIndex);
+HAL_StatusTypeDef HAL_SDADC_ConfigChannel(SDADC_HandleTypeDef *hsdadc,
+ uint32_t Channel,
+ uint32_t ContinuousMode);
+HAL_StatusTypeDef HAL_SDADC_InjectedConfigChannel(SDADC_HandleTypeDef *hsdadc,
+ uint32_t Channel,
+ uint32_t ContinuousMode);
+HAL_StatusTypeDef HAL_SDADC_SelectInjectedExtTrigger(SDADC_HandleTypeDef *hsdadc,
+ uint32_t InjectedExtTrigger,
+ uint32_t ExtTriggerEdge);
+HAL_StatusTypeDef HAL_SDADC_SelectInjectedDelay(SDADC_HandleTypeDef *hsdadc,
+ uint32_t InjectedDelay);
+HAL_StatusTypeDef HAL_SDADC_SelectRegularTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t Trigger);
+HAL_StatusTypeDef HAL_SDADC_SelectInjectedTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t Trigger);
+HAL_StatusTypeDef HAL_SDADC_MultiModeConfigChannel(SDADC_HandleTypeDef* hsdadc, uint32_t MultimodeType);
+HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeConfigChannel(SDADC_HandleTypeDef* hsdadc, uint32_t MultimodeType);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SDADC_CalibrationStart(SDADC_HandleTypeDef *hsdadc, uint32_t CalibrationSequence);
+HAL_StatusTypeDef HAL_SDADC_CalibrationStart_IT(SDADC_HandleTypeDef *hsdadc, uint32_t CalibrationSequence);
+
+HAL_StatusTypeDef HAL_SDADC_Start(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_Start_IT(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_Start_DMA(SDADC_HandleTypeDef *hsdadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_SDADC_Stop(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_Stop_IT(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_Stop_DMA(SDADC_HandleTypeDef *hsdadc);
+
+HAL_StatusTypeDef HAL_SDADC_InjectedStart(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedStart_IT(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedStart_DMA(SDADC_HandleTypeDef *hsdadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_SDADC_InjectedStop(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedStop_IT(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedStop_DMA(SDADC_HandleTypeDef *hsdadc);
+
+HAL_StatusTypeDef HAL_SDADC_MultiModeStart_DMA(SDADC_HandleTypeDef* hsdadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_SDADC_MultiModeStop_DMA(SDADC_HandleTypeDef* hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeStart_DMA(SDADC_HandleTypeDef* hsdadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeStop_DMA(SDADC_HandleTypeDef* hsdadc);
+
+uint32_t HAL_SDADC_GetValue(SDADC_HandleTypeDef *hsdadc);
+uint32_t HAL_SDADC_InjectedGetValue(SDADC_HandleTypeDef *hsdadc, uint32_t* Channel);
+uint32_t HAL_SDADC_MultiModeGetValue(SDADC_HandleTypeDef* hsdadc);
+uint32_t HAL_SDADC_InjectedMultiModeGetValue(SDADC_HandleTypeDef* hsdadc);
+
+void HAL_SDADC_IRQHandler(SDADC_HandleTypeDef* hsdadc);
+
+HAL_StatusTypeDef HAL_SDADC_PollForCalibEvent(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDADC_PollForConversion(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDADC_PollForInjectedConversion(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
+
+void HAL_SDADC_CalibrationCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_ConvHalfCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_ConvCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_InjectedConvHalfCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_InjectedConvCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_ErrorCallback(SDADC_HandleTypeDef* hsdadc);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SDADC_StateTypeDef HAL_SDADC_GetState(SDADC_HandleTypeDef* hsdadc);
+uint32_t HAL_SDADC_GetError(SDADC_HandleTypeDef* hsdadc);
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F373xC) || defined(STM32F378xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_SDADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_smartcard.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,782 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SMARTCARD_H
+#define __STM32F3xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits.
+ Only 1.5 stop bits are authorized in SmartCard mode. */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note The parity is enabled by default (PCE is forced to 1).
+ Since the WordLength is forced to 8 bits + parity, M is
+ forced to 1 and the parity bit is the 9th bit. */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint16_t OneBitSampling; /*!< Specifies wether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
+
+ uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler */
+
+ uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time */
+
+ uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
+ in case of parity error.
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
+
+ uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
+ This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
+
+ uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
+ it is used to implement the Character Wait Time (CWT) and
+ Block Wait Time (BWT). It is coded over 24 bits. */
+
+ uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
+ This parameter can be any value from 0x0 to 0xFF */
+
+ uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
+ receive and transmit mode). When set to 0, retransmission is
+ disabled. Otherwise, its maximum value is 7 (before signalling
+ an error) */
+
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief SMARTCARD advanced features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
+ advanced features may be initialized at the same time. This parameter
+ can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref SMARTCARD_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref SMARTCARD_MSB_First */
+}SMARTCARD_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief HAL SMARTCARD Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
+ HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_SMARTCARD_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_SMARTCARD_ERROR_RTO = 0x20 /*!< Receiver TimeOut error */
+}HAL_SMARTCARD_ErrorTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /* SmartCard advanced features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+
+ HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SmartCard Error code */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+ * @brief SMARTCARD clock sources
+ */
+typedef enum
+{
+ SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ SMARTCARD_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
+ SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ SMARTCARD_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}SMARTCARD_ClockSourceTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP))
+#define IS_SMARTCARD_STOPBITS(STOPBITS) ((STOPBITS) == SMARTCARD_STOPBITS_1_5)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint16_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint16_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint16_t)0x0000)
+#define SMARTCARD_POLARITY_HIGH ((uint16_t)USART_CR2_CPOL)
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint16_t)0x0000)
+#define SMARTCARD_PHASE_2EDGE ((uint16_t)USART_CR2_CPHA)
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_LASTBIT_ENABLED ((uint16_t)USART_CR2_LBCL)
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLED) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
+ * @{
+ */
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_SMARTCARD_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLED ((uint16_t)0x0000)
+#define IS_SMARTCARD_NACK(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
+ ((NACK) == SMARTCARD_NACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
+ * @{
+ */
+#define SMARTCARD_TIMEOUT_DISABLED ((uint32_t)0x00000000)
+#define SMARTCARD_TIMEOUT_ENABLED ((uint32_t)USART_CR2_RTOEN)
+#define IS_SMARTCARD_TIMEOUT(TIMEOUT) (((TIMEOUT) == SMARTCARD_TIMEOUT_DISABLED) || \
+ ((TIMEOUT) == SMARTCARD_TIMEOUT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_SMARTCARD_ADVFEATURE_INIT(INIT) ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
+ SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_SWAP_INIT | \
+ SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_SMARTCARD_OVERRUN(OVERRUN) (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define SMARTCARD_FLAG_REACK ((uint32_t)0x00400000)
+#define SMARTCARD_FLAG_TEACK ((uint32_t)0x00200000)
+#define SMARTCARD_FLAG_BUSY ((uint32_t)0x00010000)
+#define SMARTCARD_FLAG_EOBF ((uint32_t)0x00001000)
+#define SMARTCARD_FLAG_RTOF ((uint32_t)0x00000800)
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define SMARTCARD_IT_PE ((uint16_t)0x0028)
+#define SMARTCARD_IT_TXE ((uint16_t)0x0727)
+#define SMARTCARD_IT_TC ((uint16_t)0x0626)
+#define SMARTCARD_IT_RXNE ((uint16_t)0x0525)
+
+#define SMARTCARD_IT_ERR ((uint16_t)0x0060)
+#define SMARTCARD_IT_ORE ((uint16_t)0x0300)
+#define SMARTCARD_IT_NE ((uint16_t)0x0200)
+#define SMARTCARD_IT_FE ((uint16_t)0x0100)
+
+#define SMARTCARD_IT_EOB ((uint16_t)0x0C3B)
+#define SMARTCARD_IT_RTO ((uint16_t)0x0B3A)
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
+ * @{
+ */
+#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
+ * @{
+ */
+#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
+ * @{
+ */
+#define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
+ * @{
+ */
+#define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
+ * @{
+ */
+#define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flag mask
+ * @{
+ */
+#define SMARTCARD_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: SMARTCARD handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_REACK: Receive enable ackowledge flag
+ * @arg SMARTCARD_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg SMARTCARD_FLAG_BUSY: Busy flag
+ * @arg SMARTCARD_FLAG_EOBF: End of block flag
+ * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief Disables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified SmartCard interrupt interrupt source is enabled.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
+
+
+/** @brief Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg USART_CLEAR_EOBF: End Of Block Clear Flag
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific SMARTCARD request flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Check the Baud rate range. The maximum Baud Rate is derived from the
+ * maximum clock on F3 (i.e. 72 MHz) divided by the oversampling used
+ * on the SMARTCARD (i.e. 16)
+ * @param __BAUDRATE__: Baud rate set by the configuration function.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
+
+/** @brief Check the block length range. The maximum SMARTCARD block length is 0xFF.
+ * @param __LENGTH__: block length.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF)
+
+/** @brief Check the receiver timeout value. The maximum SMARTCARD receiver timeout
+ * value is 0xFFFFFF.
+ * @param __TIMEOUTVALUE__: receiver timeout value.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF)
+
+/** @brief Check the SMARTCARD autoretry counter value. The maximum number of
+ * retransmissions is 0x7.
+ * @param __COUNT__: number of retransmissions
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7)
+
+
+
+/**
+ * @}
+ */
+
+/* Include SMARTCARD HAL Extension module */
+#include "stm32f3xx_hal_smartcard_ex.h"
+
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral Control functions ***********************************************/
+void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_smartcard_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,218 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_smartcard_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SMARTCARD_EX_H
+#define __STM32F3xx_HAL_SMARTCARD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARDEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SMARTCARDEx_Exported_Macros
+ * @{
+ */
+
+/** @brief Reports the SMARTCARD clock source.
+ * @param __HANDLE__: specifies the SMARTCARD Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F334x8) || defined(STM32F303x8) || defined(STM32F328xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#else
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#endif
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength);
+void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue);
+HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_SMARTCARD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_smbus.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,573 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_smbus.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of SMBUS HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SMBUS_H
+#define __STM32F3xx_HAL_SMBUS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMBUS
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief SMBUS Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value.
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+ uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not.
+ This parameter can be a a value of @ref SMBUS_Analog_Filter */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
+ This parameter can be a value of @ref SMBUS_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref SMBUS_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref SMBUS_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref SMBUS_nostretch_mode */
+
+ uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected.
+ This parameter can be a value of @ref SMBUS_packet_error_check_mode */
+
+ uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected.
+ This parameter can be a value of @ref SMBUS_peripheral_mode */
+
+ uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
+ (Enable bits and different timeout values)
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+} SMBUS_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMBUS_STATE_RESET = 0x00, /*!< SMBUS not yet initialized or disabled */
+ HAL_SMBUS_STATE_READY = 0x01, /*!< SMBUS initialized and ready for use */
+ HAL_SMBUS_STATE_BUSY = 0x02, /*!< SMBUS internal process is ongoing */
+ HAL_SMBUS_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
+ HAL_SMBUS_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
+ HAL_SMBUS_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
+ HAL_SMBUS_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
+ HAL_SMBUS_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMBUS_STATE_ERROR = 0x04, /*!< Reception process is ongoing */
+ HAL_SMBUS_STATE_SLAVE_LISTEN = 0x08, /*!< Address Listen Mode is ongoing */
+ /* Aliases for inter STM32 series compatibility */
+ HAL_SMBUS_STATE_LISTEN = HAL_SMBUS_STATE_SLAVE_LISTEN
+}HAL_SMBUS_StateTypeDef;
+
+/**
+ * @brief HAL SMBUS Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SMBUS_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SMBUS_ERROR_BERR = 0x01, /*!< BERR error */
+ HAL_SMBUS_ERROR_ARLO = 0x02, /*!< ARLO error */
+ HAL_SMBUS_ERROR_ACKF = 0x04, /*!< ACKF error */
+ HAL_SMBUS_ERROR_OVR = 0x08, /*!< OVR error */
+ HAL_SMBUS_ERROR_HALTIMEOUT = 0x10, /*!< Timeout error */
+ HAL_SMBUS_ERROR_BUSTIMEOUT = 0x20, /*!< Bus Timeout error */
+ HAL_SMBUS_ERROR_ALERT = 0x40, /*!< Alert error */
+ HAL_SMBUS_ERROR_PECERR = 0x80 /*!< PEC error */
+
+}HAL_SMBUS_ErrorTypeDef;
+
+/**
+ * @brief SMBUS handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< SMBUS registers base address */
+
+ SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */
+
+ uint16_t XferSize; /*!< SMBUS transfer size */
+
+ __IO uint16_t XferCount; /*!< SMBUS transfer counter */
+
+ __IO uint32_t XferOptions; /*!< SMBUS transfer options */
+
+ __IO HAL_SMBUS_StateTypeDef PreviousState; /*!< SMBUS communication Previous tate */
+
+ HAL_LockTypeDef Lock; /*!< SMBUS locking object */
+
+ __IO HAL_SMBUS_StateTypeDef State; /*!< SMBUS communication state */
+
+ __IO HAL_SMBUS_ErrorTypeDef ErrorCode; /*!< SMBUS Error code */
+
+}SMBUS_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SMBUS_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SMBUS_Analog_Filter
+ * @{
+ */
+#define SMBUS_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define SMBUS_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
+
+#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == SMBUS_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_addressing_mode
+ * @{
+ */
+#define SMBUS_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define SMBUS_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_dual_addressing_mode
+ * @{
+ */
+
+#define SMBUS_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
+
+#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == SMBUS_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_own_address2_masks
+ * @{
+ */
+
+#define SMBUS_OA2_NOMASK ((uint8_t)0x00)
+#define SMBUS_OA2_MASK01 ((uint8_t)0x01)
+#define SMBUS_OA2_MASK02 ((uint8_t)0x02)
+#define SMBUS_OA2_MASK03 ((uint8_t)0x03)
+#define SMBUS_OA2_MASK04 ((uint8_t)0x04)
+#define SMBUS_OA2_MASK05 ((uint8_t)0x05)
+#define SMBUS_OA2_MASK06 ((uint8_t)0x06)
+#define SMBUS_OA2_MASK07 ((uint8_t)0x07)
+
+#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
+ ((MASK) == SMBUS_OA2_MASK01) || \
+ ((MASK) == SMBUS_OA2_MASK02) || \
+ ((MASK) == SMBUS_OA2_MASK03) || \
+ ((MASK) == SMBUS_OA2_MASK04) || \
+ ((MASK) == SMBUS_OA2_MASK05) || \
+ ((MASK) == SMBUS_OA2_MASK06) || \
+ ((MASK) == SMBUS_OA2_MASK07))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMBUS_general_call_addressing_mode
+ * @{
+ */
+#define SMBUS_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_GENERALCALL_ENABLED I2C_CR1_GCEN
+
+#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLED) || \
+ ((CALL) == SMBUS_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_nostretch_mode
+ * @{
+ */
+#define SMBUS_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == SMBUS_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_packet_error_check_mode
+ * @{
+ */
+#define SMBUS_PEC_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_PEC_ENABLED I2C_CR1_PECEN
+
+#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLED) || \
+ ((PEC) == SMBUS_PEC_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_peripheral_mode
+ * @{
+ */
+#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBHEN)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (uint32_t)(0x00000000)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP (uint32_t)(I2C_CR1_SMBDEN)
+
+#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_ReloadEndMode_definition
+ * @{
+ */
+
+#define SMBUS_SOFTEND_MODE ((uint32_t)0x00000000)
+#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD
+#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND
+#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE
+
+#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
+ ((MODE) == SMBUS_AUTOEND_MODE) || \
+ ((MODE) == SMBUS_SOFTEND_MODE) || \
+ ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_StartStopMode_definition
+ * @{
+ */
+
+#define SMBUS_NO_STARTSTOP ((uint32_t)0x00000000)
+#define SMBUS_GENERATE_STOP I2C_CR2_STOP
+#define SMBUS_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define SMBUS_GENERATE_START_WRITE I2C_CR2_START
+
+#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
+ ((REQUEST) == SMBUS_GENERATE_START_READ) || \
+ ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
+ ((REQUEST) == SMBUS_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_XferOptions_definition
+ * @{
+ */
+
+#define SMBUS_FIRST_FRAME ((uint32_t)(SMBUS_SOFTEND_MODE))
+#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE))
+#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+
+#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_FIRST_FRAME) || \
+ ((REQUEST) == SMBUS_NEXT_FRAME) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Interrupt_configuration_definition
+ * @brief SMBUS Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SMBUS_IT_ERRI I2C_CR1_ERRIE
+#define SMBUS_IT_TCI I2C_CR1_TCIE
+#define SMBUS_IT_STOPI I2C_CR1_STOPIE
+#define SMBUS_IT_NACKI I2C_CR1_NACKIE
+#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE
+#define SMBUS_IT_RXI I2C_CR1_RXIE
+#define SMBUS_IT_TXI I2C_CR1_TXIE
+#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)
+#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
+#define SMBUS_IT_ALERT (SMBUS_IT_ERRI)
+#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Flag_definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXXXXXX : Flag mask
+ * @{
+ */
+
+#define SMBUS_FLAG_TXE I2C_ISR_TXE
+#define SMBUS_FLAG_TXIS I2C_ISR_TXIS
+#define SMBUS_FLAG_RXNE I2C_ISR_RXNE
+#define SMBUS_FLAG_ADDR I2C_ISR_ADDR
+#define SMBUS_FLAG_AF I2C_ISR_NACKF
+#define SMBUS_FLAG_STOPF I2C_ISR_STOPF
+#define SMBUS_FLAG_TC I2C_ISR_TC
+#define SMBUS_FLAG_TCR I2C_ISR_TCR
+#define SMBUS_FLAG_BERR I2C_ISR_BERR
+#define SMBUS_FLAG_ARLO I2C_ISR_ARLO
+#define SMBUS_FLAG_OVR I2C_ISR_OVR
+#define SMBUS_FLAG_PECERR I2C_ISR_PECERR
+#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define SMBUS_FLAG_ALERT I2C_ISR_ALERT
+#define SMBUS_FLAG_BUSY I2C_ISR_BUSY
+#define SMBUS_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset SMBUS handle state
+ * @param __HANDLE__: SMBUS handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
+
+/** @brief Enable or disable the specified SMBUS interrupts.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_IT_ERRI: Errors interrupt enable
+ * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
+ * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
+ * @arg SMBUS_IT_NACKI: NACK received interrupt enable
+ * @arg SMBUS_IT_ADDRI: Address match interrupt enable
+ * @arg SMBUS_IT_RXI: RX interrupt enable
+ * @arg SMBUS_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SMBUS interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __INTERRUPT__: specifies the SMBUS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_IT_ERRI: Errors interrupt enable
+ * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
+ * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
+ * @arg SMBUS_IT_NACKI: NACK received interrupt enable
+ * @arg SMBUS_IT_ADDRI: Address match interrupt enable
+ * @arg SMBUS_IT_RXI: RX interrupt enable
+ * @arg SMBUS_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SMBUS flag is set or not.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_FLAG_TXE: Transmit data register empty
+ * @arg SMBUS_FLAG_TXIS: Transmit interrupt status
+ * @arg SMBUS_FLAG_RXNE: Receive data register not empty
+ * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
+ * @arg SMBUS_FLAG_AF: NACK received flag
+ * @arg SMBUS_FLAG_STOPF: STOP detection flag
+ * @arg SMBUS_FLAG_TC: Transfer complete (master mode)
+ * @arg SMBUS_FLAG_TCR: Transfer complete reload
+ * @arg SMBUS_FLAG_BERR: Bus error
+ * @arg SMBUS_FLAG_ARLO: Arbitration lost
+ * @arg SMBUS_FLAG_OVR: Overrun/Underrun
+ * @arg SMBUS_FLAG_PECERR: PEC error in reception
+ * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg SMBUS_FLAG_ALERT: SMBus alert
+ * @arg SMBUS_FLAG_BUSY: Bus busy
+ * @arg SMBUS_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define SMBUS_FLAG_MASK ((uint32_t)0x0001FFFF)
+#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)))
+
+/** @brief Clears the SMBUS pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
+ * @arg SMBUS_FLAG_AF: NACK received flag
+ * @arg SMBUS_FLAG_STOPF: STOP detection flag
+ * @arg SMBUS_FLAG_BERR: Bus error
+ * @arg SMBUS_FLAG_ARLO: Arbitration lost
+ * @arg SMBUS_FLAG_OVR: Overrun/Underrun
+ * @arg SMBUS_FLAG_PECERR: PEC error in reception
+ * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg SMBUS_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+
+#define __HAL_SMBUS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_SMBUS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
+#define __HAL_SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define __HAL_SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define __HAL_SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17)
+#define __HAL_SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16)
+#define __HAL_SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define __HAL_SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
+#define __HAL_SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
+#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= I2C_CR2_NACK)
+
+#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DeInit (SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Listen_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus);
+/* Aliases for new API and to insure inter STM32 series compatibility */
+#define HAL_SMBUS_EnableListen_IT HAL_SMBUS_Slave_Listen_IT
+
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+
+ /******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
+void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveAddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_SMBUS_SlaveListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+/* Aliases for new API and to insure inter STM32 series compatibility */
+#define HAL_SMBUS_AddrCallback HAL_SMBUS_SlaveAddrCallback
+#define HAL_SMBUS_ListenCpltCallback HAL_SMBUS_SlaveListenCpltCallback
+
+void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus);
+
+/* Peripheral State and Errors functions **************************************************/
+HAL_SMBUS_StateTypeDef HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_SMBUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_spi.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,639 @@
+ /**
+ ******************************************************************************
+ * @file stm32f3xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SPI_H
+#define __STM32F3xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not .
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+ uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation.
+ CRC Length is only used with Data8 and Data16, not other data size
+ This parameter must 0 or 1 or 2*/
+
+ uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This mode is activated by the NSSP bit in the SPIx_CR2 register and
+ it takes effect only if the SPI interface is configured as Motorola SPI
+ master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
+ CPOL setting is ignored).. */
+} SPI_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_SPI_STATE_ERROR = 0x07 /*!< Data Transmission and Reception process is ongoing */
+
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief HAL SPI Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
+ HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
+ HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
+ HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
+ HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_SPI_ERROR_FLAG = 0x20, /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+ HAL_SPI_ERROR_UNKNOW = 0x40, /*!< Unknow Error error */
+}HAL_SPI_ErrorTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /* SPI registers base address */
+
+ SPI_InitTypeDef Init; /* SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SPI Tx Transfer size */
+
+ uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SPI Rx Transfer size */
+
+ uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+
+ uint32_t CRCSize; /* SPI CRC size used for the transfer */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Rx IRQ handler */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Tx IRQ handler */
+
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_SPI_StateTypeDef State; /* SPI communication state */
+
+ HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+
+}SPI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SPI_mode
+ * @{
+ */
+
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+
+#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) ||\
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \
+ ((MODE) == SPI_DIRECTION_1LINE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size
+ * @{
+ */
+
+#define SPI_DATASIZE_4BIT ((uint16_t)0x0300)
+#define SPI_DATASIZE_5BIT ((uint16_t)0x0400)
+#define SPI_DATASIZE_6BIT ((uint16_t)0x0500)
+#define SPI_DATASIZE_7BIT ((uint16_t)0x0600)
+#define SPI_DATASIZE_8BIT ((uint16_t)0x0700)
+#define SPI_DATASIZE_9BIT ((uint16_t)0x0800)
+#define SPI_DATASIZE_10BIT ((uint16_t)0x0900)
+#define SPI_DATASIZE_11BIT ((uint16_t)0x0A00)
+#define SPI_DATASIZE_12BIT ((uint16_t)0x0B00)
+#define SPI_DATASIZE_13BIT ((uint16_t)0x0C00)
+#define SPI_DATASIZE_14BIT ((uint16_t)0x0D00)
+#define SPI_DATASIZE_15BIT ((uint16_t)0x0E00)
+#define SPI_DATASIZE_16BIT ((uint16_t)0x0F00)
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_15BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_14BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_13BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_12BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_11BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_10BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_9BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_7BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_6BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_5BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_4BIT))
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity
+ * @{
+ */
+
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase
+ * @{
+ */
+
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management
+ * @{
+ */
+
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+
+ /**
+ * @}
+ */
+
+
+/** @defgroup SPI_NSS pulse management
+ * @{
+ */
+#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
+#define SPI_NSS_PULSE_DISABLED ((uint32_t)0x00000000)
+
+#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
+ ((NSSP) == SPI_NSS_PULSE_DISABLED))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_BaudRate_Prescaler
+ * @{
+ */
+
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission
+ * @{
+ */
+
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode
+ * @{
+ */
+
+#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLED SPI_CR2_FRF
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
+ ((MODE) == SPI_TIMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation
+ * @{
+ */
+
+#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_length
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_CRC_LENGTH_DATASIZE: aligned with the data size
+ * SPI_CRC_LENGTH_8BIT : CRC 8bit
+ * SPI_CRC_LENGTH_16BIT : CRC 16bit
+ */
+#define SPI_CRC_LENGTH_DATASIZE 0
+#define SPI_CRC_LENGTH_8BIT 1
+#define SPI_CRC_LENGTH_16BIT 2
+#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) ||\
+ ((LENGTH) == SPI_CRC_LENGTH_8BIT) || \
+ ((LENGTH) == SPI_CRC_LENGTH_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_FIFO_reception_threshold
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_RxFIFOThreshold_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/2(16-bits).
+ * SPI_RxFIFOThreshold_QF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8 bits).
+ */
+#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_configuration_definition
+ * @brief SPI Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+#define IS_SPI_IT(IT) (((IT) == SPI_IT_TXE) || \
+ ((IT) == SPI_IT_RXNE) || \
+ ((IT) == SPI_IT_ERR))
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_Flag_definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXX : Flag register Index
+ * - YYYY : Flag mask
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
+#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */
+#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */
+#define IS_SPI_FLAG(FLAG) (((FLAG) == SPI_FLAG_RXNE) || \
+ ((FLAG) == SPI_FLAG_TXE) || \
+ ((FLAG) == SPI_FLAG_BSY) || \
+ ((FLAG) == SPI_FLAG_CRCERR)|| \
+ ((FLAG) == SPI_FLAG_MODF) || \
+ ((FLAG) == SPI_FLAG_OVR) || \
+ ((FLAG) == SPI_FLAG_FTLVL) || \
+ ((FLAG) == SPI_FLAG_FRLVL) || \
+ ((FLAG) == SPI_IT_FRE))
+
+
+/** @defgroup SPI_transmission_fifo_status_level
+ * @{
+ */
+
+#define SPI_FTLVL_EMPTY ((uint16_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL ((uint16_t)0x0800)
+#define SPI_FTLVL_HALF_FULL ((uint16_t)0x1000)
+#define SPI_FTLVL_FULL ((uint16_t)0x1800)
+
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_reception_fifo_status_level
+ * @{
+ */
+#define SPI_FRLVL_EMPTY ((uint16_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL ((uint16_t)0x0200)
+#define SPI_FRLVL_HALF_FULL ((uint16_t)0x0400)
+#define SPI_FRLVL_FULL ((uint16_t)0x0600)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @brief Reset SPI handle state
+ * @param __HANDLE__: SPI handle.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enables or disables the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SPI flag is set or not.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the SPI CRCERR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
+
+/** @brief Clears the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);}while(0)
+
+/** @brief Clears the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+
+/** @brief Clears the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
+
+/** @brief Enables the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+
+/** @brief Disables the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_SPE)
+
+/** @brief Sets the SPI transmit-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+/** @brief Sets the SPI receive-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_BIDIOE)
+
+/** @brief Resets the CRC calculation of the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_InitExtended(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_tim.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1352 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_H
+#define __STM32F3xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter
+ This parameter can be a value of @ref TIM_Clock_Filter */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources
+ This parameter can be a value of @ref TIMEx_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter
+ This parameter can be a value of @ref TIM_ClearInput_Filter */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIMEx_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a value of @ref TIM_Trigger_Filter */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode
+ * @{
+ */
+
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision
+ * @{
+ */
+
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State
+ * @{
+ */
+
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Output_Fast_State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Output_Compare_N_State
+ * @{
+ */
+
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity
+ * @{
+ */
+
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity
+ * @{
+ */
+
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State
+ * @{
+ */
+
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State
+ * @{
+ */
+
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+
+
+/** @defgroup TIM_Input_Capture_Polarity
+ * @{
+ */
+
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection
+ * @{
+ */
+
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler
+ * @{
+ */
+
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode
+ * @{
+ */
+
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Encoder_Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+/**
+ * @}
+ */
+/** @defgroup TIM_Interrupt_definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+
+#define IS_TIM_IT(IT) ((((IT) & 0xFFFFFF00) == 0x00000000) && ((IT) != 0x00000000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_UPDATE) || \
+ ((IT) == TIM_IT_CC1) || \
+ ((IT) == TIM_IT_CC2) || \
+ ((IT) == TIM_IT_CC3) || \
+ ((IT) == TIM_IT_CC4) || \
+ ((IT) == TIM_IT_COM) || \
+ ((IT) == TIM_IT_TRIGGER) || \
+ ((IT) == TIM_IT_BREAK))
+/**
+ * @}
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000)
+
+/** @defgroup TIM_DMA_sources
+ * @{
+ */
+
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition
+ * @{
+ */
+
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+
+#define IS_TIM_FLAG(FLAG) (((FLAG) == TIM_FLAG_UPDATE) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_TRIGGER) || \
+ ((FLAG) == TIM_FLAG_BREAK) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Clock_Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+/**
+ * @}
+ */
+/** @defgroup TIM_Clock_Filter
+ * @{
+ */
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Filter
+ * @{
+ */
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Lock_level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+/**
+ * @}
+ */
+/** @defgroup TIM_AOE_Bit_Set_Reset
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Master_Slave_Mode
+ * @{
+ */
+
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Trigger_Selection
+ * @{
+ */
+
+#define TIM_TS_ITR0 ((uint32_t)0x0000)
+#define TIM_TS_ITR1 ((uint32_t)0x0010)
+#define TIM_TS_ITR2 ((uint32_t)0x0020)
+#define TIM_TS_ITR3 ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060)
+#define TIM_TS_ETRF ((uint32_t)0x0070)
+#define TIM_TS_NONE ((uint32_t)0xFFFF)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Filter
+ * @{
+ */
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+ /** @defgroup TIM_TI1_Selection
+ * @{
+ */
+
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Transfer (0x00000000)
+#define TIM_DMABurstLength_2Transfers (0x00000100)
+#define TIM_DMABurstLength_3Transfers (0x00000200)
+#define TIM_DMABurstLength_4Transfers (0x00000300)
+#define TIM_DMABurstLength_5Transfers (0x00000400)
+#define TIM_DMABurstLength_6Transfers (0x00000500)
+#define TIM_DMABurstLength_7Transfers (0x00000600)
+#define TIM_DMABurstLength_8Transfers (0x00000700)
+#define TIM_DMABurstLength_9Transfers (0x00000800)
+#define TIM_DMABurstLength_10Transfers (0x00000900)
+#define TIM_DMABurstLength_11Transfers (0x00000A00)
+#define TIM_DMABurstLength_12Transfers (0x00000B00)
+#define TIM_DMABurstLength_13Transfers (0x00000C00)
+#define TIM_DMABurstLength_14Transfers (0x00000D00)
+#define TIM_DMABurstLength_15Transfers (0x00000E00)
+#define TIM_DMABurstLength_16Transfers (0x00000F00)
+#define TIM_DMABurstLength_17Transfers (0x00001000)
+#define TIM_DMABurstLength_18Transfers (0x00001100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value
+ * @{
+ */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+/* The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_DIRECTION_STATUS(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_PRESCALER (__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define __HAL_TIM_SetICPrescalerValue(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define __HAL_TIM_ResetICPrescalerValue(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCounter(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetCounter(__HANDLE__) \
+ ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetAutoreload(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetAutoreload(__HANDLE__) \
+ ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SetClockDivision(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetClockDivision(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SetICPrescaler(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ __HAL_TIM_ResetICPrescalerValue((__HANDLE__), (__CHANNEL__)); \
+ __HAL_TIM_SetICPrescalerValue((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GetICPrescaler(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extension module */
+#include "stm32f3xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+
+
+
+
+
+
+
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_tim_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,947 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of TIM HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_EX_H
+#define __STM32F3xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: timer instances provide a single TRGO
+ * output
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: single break input with configurable polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t BreakFilter; /*!< Specifies the brek input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Break2State; /*!< TIM Break2 State
+ This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity
+ This parameter can be a value of @ref TIMEx_Break2_Polarity */
+ uint32_t Break2Filter; /*!< TIM break2 input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note Advanced timers provide TRGO2 internal line which is redirected
+ * to the ADC
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
+ This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes
+ * @{
+ */
+
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode
+ * @{
+ */
+
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint16_t)0x0004)
+#define TIM_SLAVEMODE_GATED ((uint16_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER ((uint16_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint16_t)0x0007)
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Event_Source
+ * @{
+ */
+
+#define TIM_EventSource_Update TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EventSource_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EventSource_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EventSource_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EventSource_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EventSource_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EventSource_Trigger TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EventSource_Break TIM_EGR_BG /*!< A break event is generated */
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_DMA_Base_address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_OR (0x00000013)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup TIMEx_Channel
+ * @{
+ */
+
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_5 ((uint32_t)0x0010)
+#define TIM_CHANNEL_6 ((uint32_t)0x0014)
+#define TIM_CHANNEL_ALL ((uint32_t)0x003C)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1 ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM1) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM2) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_OCREFCLR ((uint32_t)0x0002)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_BreakInput_Filter
+ * @{
+ */
+
+#define IS_TIM_BREAK_FILTER(BRKFILTER) ((BRKFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Input_enable_disable
+ * @{
+ */
+#define TIM_BREAK2_DISABLE ((uint32_t)0x00000000)
+#define TIM_BREAK2_ENABLE ((uint32_t)TIM_BDTR_BK2E)
+
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+ ((STATE) == TIM_BREAK2_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIMEx_Break2_Polarity
+ * @{
+ */
+#define TIM_BREAK2POLARITY_LOW ((uint32_t)0x00000000)
+#define TIM_BREAK2POLARITY_HIGH ((uint32_t)TIM_BDTR_BK2P)
+
+#define IS_TIM_BREAK2_POLARITY(POLARITY) (((POLARITY) == TIM_BREAK2POLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAK2POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Master_Mode_Selection_2
+ * @{
+ */
+#define TIM_TRGO2_RESET ((uint32_t)0x00000000)
+#define TIM_TRGO2_ENABLE ((uint32_t)(TIM_CR2_MMS2_0))
+#define TIM_TRGO2_UPDATE ((uint32_t)(TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC1 ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC1REF ((uint32_t)(TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC2REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC3REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC4REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF ((uint32_t)(TIM_CR2_MMS2_3))
+#define TIM_TRGO2_OC6REF ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC6REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET) || \
+ ((SOURCE) == TIM_TRGO2_ENABLE) || \
+ ((SOURCE) == TIM_TRGO2_UPDATE) || \
+ ((SOURCE) == TIM_TRGO2_OC1) || \
+ ((SOURCE) == TIM_TRGO2_OC1REF) || \
+ ((SOURCE) == TIM_TRGO2_OC2REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER ((uint32_t)(TIM_SMCR_SMS_3))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+ ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source
+ * @{
+ */
+
+#define TIM_EventSource_Update TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EventSource_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EventSource_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EventSource_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EventSource_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EventSource_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EventSource_Trigger TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EventSource_Break TIM_EGR_BG /*!< A break event is generated */
+#define TIM_EventSource_Break2 TIM_EGR_B2G /*!< A break 2 event is generated */
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFE00) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_CCMR3 (0x00000015)
+#define TIM_DMABase_CCR5 (0x00000016)
+#define TIM_DMABase_CCR6 (0x00000017)
+#define TIM_DMABase_OR (0x00000018)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_CCMR3) || \
+ ((BASE) == TIM_DMABase_CCR5) || \
+ ((BASE) == TIM_DMABase_CCR6) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F302xC)
+/** @defgroup TIMEx_Remap
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP) == TIM_TIM16_GPIO) ||\
+ ((REMAP) == TIM_TIM16_RTC) ||\
+ ((REMAP) == TIM_TIM16_HSE) ||\
+ ((REMAP) == TIM_TIM16_MCO))
+/**
+ * @}
+ */
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup TIMEx_Remap
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001) /* !< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002) /* !< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003) /* !< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004) /* !< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008) /* !< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000C) /* !< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004) /* !< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008) /* !< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000C) /* !< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000) /* !< Non significant value for TIM16 */
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE))
+/**
+ * @}
+ */
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Remap
+ * @{
+ */
+
+#define TIM_TIM2_TIM8_TRGO (0x00000000) /*!< TIM8 TRGOUT is connected to TIM2_ITR1 */
+#define TIM_TIM2_ETH_PTP (0x00000400) /*!< PTP trigger output is connected to TIM2_ITR1 */
+#define TIM_TIM2_USBFS_SOF (0x00000800) /*!< OTG FS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM2_USBHS_SOF (0x00000C00) /*!< OTG HS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM14_GPIO (0x00000000) /* !< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC (0x00000001) /* !< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE (0x00000002) /* !< TIM14 TI1 is connected to HSE/32 */
+#define TIM_TIM14_MCO (0x00000003) /* !< TIM14 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM2_TIM8_TRGO) ||\
+ ((REMAP) == TIM_TIM2_ETH_PTP) ||\
+ ((REMAP) == TIM_TIM2_USBFS_SOF) ||\
+ ((REMAP) == TIM_TIM2_USBHS_SOF) ||\
+ ((REMAP) == TIM_TIM14_GPIO) ||\
+ ((REMAP) == TIM_TIM14_RTC) ||\
+ ((REMAP) == TIM_TIM14_HSE) ||\
+ ((REMAP) == TIM_TIM14_MCO))
+
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Remap
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP) == TIM_TIM16_GPIO) ||\
+ ((REMAP) == TIM_TIM16_RTC) ||\
+ ((REMAP) == TIM_TIM16_HSE) ||\
+ ((REMAP) == TIM_TIM16_MCO))
+/**
+ * @}
+ */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup TIMEx_Remap
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD3))
+/**
+ * @}
+ */
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup TIMEx_Group_Channel5
+ * @{
+ */
+#define TIM_GROUPCH5_NONE (uint32_t)0x00000000 /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC (TIM_CCR5_GC5C1) /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC (TIM_CCR5_GC5C2) /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC (TIM_CCR5_GC5C3) /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
+
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFF) == 0x00000000))
+/**
+ * @}
+ */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 |= (__COMPARE__)))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @arg TIM_CHANNEL_5: get capture/compare 5 register value
+ * @arg TIM_CHANNEL_6: get capture/compare 6 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Extnsion Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap1, uint32_t Remap2);
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_tsc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,584 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tsc.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief This file contains all the functions prototypes for the TSC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_TSC_H
+#define __STM32F3xx_TSC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TSC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief TSC state structure definition
+ */
+typedef enum
+{
+ HAL_TSC_STATE_RESET = 0x00, /*!< TSC registers have their reset value */
+ HAL_TSC_STATE_READY = 0x01, /*!< TSC registers are initialized or acquisition is completed with success */
+ HAL_TSC_STATE_BUSY = 0x02, /*!< TSC initialization or acquisition is on-going */
+ HAL_TSC_STATE_ERROR = 0x03 /*!< Acquisition is completed with max count error */
+} HAL_TSC_StateTypeDef;
+
+/**
+ * @brief TSC group status structure definition
+ */
+typedef enum
+{
+ TSC_GROUP_ONGOING = 0x00, /*!< Acquisition on group is on-going or not started */
+ TSC_GROUP_COMPLETED = 0x01 /*!< Acquisition on group is completed with success (no max count error) */
+} TSC_GroupStatusTypeDef;
+
+/**
+ * @brief TSC init structure definition
+ */
+typedef struct
+{
+ uint32_t CTPulseHighLength; /*!< Charge-transfer high pulse length */
+ uint32_t CTPulseLowLength; /*!< Charge-transfer low pulse length */
+ uint32_t SpreadSpectrum; /*!< Spread spectrum activation */
+ uint32_t SpreadSpectrumDeviation; /*!< Spread spectrum deviation */
+ uint32_t SpreadSpectrumPrescaler; /*!< Spread spectrum prescaler */
+ uint32_t PulseGeneratorPrescaler; /*!< Pulse generator prescaler */
+ uint32_t MaxCountValue; /*!< Max count value */
+ uint32_t IODefaultMode; /*!< IO default mode */
+ uint32_t SynchroPinPolarity; /*!< Synchro pin polarity */
+ uint32_t AcquisitionMode; /*!< Acquisition mode */
+ uint32_t MaxCountInterrupt; /*!< Max count interrupt activation */
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_InitTypeDef;
+
+/**
+ * @brief TSC IOs configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_IOConfigTypeDef;
+
+/**
+ * @brief TSC handle Structure definition
+ */
+typedef struct
+{
+ TSC_TypeDef *Instance; /*!< Register base address */
+ TSC_InitTypeDef Init; /*!< Initialization parameters */
+ __IO HAL_TSC_StateTypeDef State; /*!< Peripheral state */
+ HAL_LockTypeDef Lock; /*!< Lock feature */
+} TSC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Constants
+ * @{
+ */
+
+#define TSC_CTPH_1CYCLE ((uint32_t)((uint32_t) 0 << 28))
+#define TSC_CTPH_2CYCLES ((uint32_t)((uint32_t) 1 << 28))
+#define TSC_CTPH_3CYCLES ((uint32_t)((uint32_t) 2 << 28))
+#define TSC_CTPH_4CYCLES ((uint32_t)((uint32_t) 3 << 28))
+#define TSC_CTPH_5CYCLES ((uint32_t)((uint32_t) 4 << 28))
+#define TSC_CTPH_6CYCLES ((uint32_t)((uint32_t) 5 << 28))
+#define TSC_CTPH_7CYCLES ((uint32_t)((uint32_t) 6 << 28))
+#define TSC_CTPH_8CYCLES ((uint32_t)((uint32_t) 7 << 28))
+#define TSC_CTPH_9CYCLES ((uint32_t)((uint32_t) 8 << 28))
+#define TSC_CTPH_10CYCLES ((uint32_t)((uint32_t) 9 << 28))
+#define TSC_CTPH_11CYCLES ((uint32_t)((uint32_t)10 << 28))
+#define TSC_CTPH_12CYCLES ((uint32_t)((uint32_t)11 << 28))
+#define TSC_CTPH_13CYCLES ((uint32_t)((uint32_t)12 << 28))
+#define TSC_CTPH_14CYCLES ((uint32_t)((uint32_t)13 << 28))
+#define TSC_CTPH_15CYCLES ((uint32_t)((uint32_t)14 << 28))
+#define TSC_CTPH_16CYCLES ((uint32_t)((uint32_t)15 << 28))
+#define IS_TSC_CTPH(VAL) (((VAL) == TSC_CTPH_1CYCLE) || \
+ ((VAL) == TSC_CTPH_2CYCLES) || \
+ ((VAL) == TSC_CTPH_3CYCLES) || \
+ ((VAL) == TSC_CTPH_4CYCLES) || \
+ ((VAL) == TSC_CTPH_5CYCLES) || \
+ ((VAL) == TSC_CTPH_6CYCLES) || \
+ ((VAL) == TSC_CTPH_7CYCLES) || \
+ ((VAL) == TSC_CTPH_8CYCLES) || \
+ ((VAL) == TSC_CTPH_9CYCLES) || \
+ ((VAL) == TSC_CTPH_10CYCLES) || \
+ ((VAL) == TSC_CTPH_11CYCLES) || \
+ ((VAL) == TSC_CTPH_12CYCLES) || \
+ ((VAL) == TSC_CTPH_13CYCLES) || \
+ ((VAL) == TSC_CTPH_14CYCLES) || \
+ ((VAL) == TSC_CTPH_15CYCLES) || \
+ ((VAL) == TSC_CTPH_16CYCLES))
+
+#define TSC_CTPL_1CYCLE ((uint32_t)((uint32_t) 0 << 24))
+#define TSC_CTPL_2CYCLES ((uint32_t)((uint32_t) 1 << 24))
+#define TSC_CTPL_3CYCLES ((uint32_t)((uint32_t) 2 << 24))
+#define TSC_CTPL_4CYCLES ((uint32_t)((uint32_t) 3 << 24))
+#define TSC_CTPL_5CYCLES ((uint32_t)((uint32_t) 4 << 24))
+#define TSC_CTPL_6CYCLES ((uint32_t)((uint32_t) 5 << 24))
+#define TSC_CTPL_7CYCLES ((uint32_t)((uint32_t) 6 << 24))
+#define TSC_CTPL_8CYCLES ((uint32_t)((uint32_t) 7 << 24))
+#define TSC_CTPL_9CYCLES ((uint32_t)((uint32_t) 8 << 24))
+#define TSC_CTPL_10CYCLES ((uint32_t)((uint32_t) 9 << 24))
+#define TSC_CTPL_11CYCLES ((uint32_t)((uint32_t)10 << 24))
+#define TSC_CTPL_12CYCLES ((uint32_t)((uint32_t)11 << 24))
+#define TSC_CTPL_13CYCLES ((uint32_t)((uint32_t)12 << 24))
+#define TSC_CTPL_14CYCLES ((uint32_t)((uint32_t)13 << 24))
+#define TSC_CTPL_15CYCLES ((uint32_t)((uint32_t)14 << 24))
+#define TSC_CTPL_16CYCLES ((uint32_t)((uint32_t)15 << 24))
+#define IS_TSC_CTPL(VAL) (((VAL) == TSC_CTPL_1CYCLE) || \
+ ((VAL) == TSC_CTPL_2CYCLES) || \
+ ((VAL) == TSC_CTPL_3CYCLES) || \
+ ((VAL) == TSC_CTPL_4CYCLES) || \
+ ((VAL) == TSC_CTPL_5CYCLES) || \
+ ((VAL) == TSC_CTPL_6CYCLES) || \
+ ((VAL) == TSC_CTPL_7CYCLES) || \
+ ((VAL) == TSC_CTPL_8CYCLES) || \
+ ((VAL) == TSC_CTPL_9CYCLES) || \
+ ((VAL) == TSC_CTPL_10CYCLES) || \
+ ((VAL) == TSC_CTPL_11CYCLES) || \
+ ((VAL) == TSC_CTPL_12CYCLES) || \
+ ((VAL) == TSC_CTPL_13CYCLES) || \
+ ((VAL) == TSC_CTPL_14CYCLES) || \
+ ((VAL) == TSC_CTPL_15CYCLES) || \
+ ((VAL) == TSC_CTPL_16CYCLES))
+
+#define IS_TSC_SS(VAL) (((VAL) == DISABLE) || ((VAL) == ENABLE))
+
+#define IS_TSC_SSD(VAL) (((VAL) == 0) || (((VAL) > 0) && ((VAL) < 128)))
+
+#define TSC_SS_PRESC_DIV1 ((uint32_t)0)
+#define TSC_SS_PRESC_DIV2 (TSC_CR_SSPSC)
+#define IS_TSC_SS_PRESC(VAL) (((VAL) == TSC_SS_PRESC_DIV1) || ((VAL) == TSC_SS_PRESC_DIV2))
+
+#define TSC_PG_PRESC_DIV1 ((uint32_t)(0 << 12))
+#define TSC_PG_PRESC_DIV2 ((uint32_t)(1 << 12))
+#define TSC_PG_PRESC_DIV4 ((uint32_t)(2 << 12))
+#define TSC_PG_PRESC_DIV8 ((uint32_t)(3 << 12))
+#define TSC_PG_PRESC_DIV16 ((uint32_t)(4 << 12))
+#define TSC_PG_PRESC_DIV32 ((uint32_t)(5 << 12))
+#define TSC_PG_PRESC_DIV64 ((uint32_t)(6 << 12))
+#define TSC_PG_PRESC_DIV128 ((uint32_t)(7 << 12))
+#define IS_TSC_PG_PRESC(VAL) (((VAL) == TSC_PG_PRESC_DIV1) || \
+ ((VAL) == TSC_PG_PRESC_DIV2) || \
+ ((VAL) == TSC_PG_PRESC_DIV4) || \
+ ((VAL) == TSC_PG_PRESC_DIV8) || \
+ ((VAL) == TSC_PG_PRESC_DIV16) || \
+ ((VAL) == TSC_PG_PRESC_DIV32) || \
+ ((VAL) == TSC_PG_PRESC_DIV64) || \
+ ((VAL) == TSC_PG_PRESC_DIV128))
+
+#define TSC_MCV_255 ((uint32_t)(0 << 5))
+#define TSC_MCV_511 ((uint32_t)(1 << 5))
+#define TSC_MCV_1023 ((uint32_t)(2 << 5))
+#define TSC_MCV_2047 ((uint32_t)(3 << 5))
+#define TSC_MCV_4095 ((uint32_t)(4 << 5))
+#define TSC_MCV_8191 ((uint32_t)(5 << 5))
+#define TSC_MCV_16383 ((uint32_t)(6 << 5))
+#define IS_TSC_MCV(VAL) (((VAL) == TSC_MCV_255) || \
+ ((VAL) == TSC_MCV_511) || \
+ ((VAL) == TSC_MCV_1023) || \
+ ((VAL) == TSC_MCV_2047) || \
+ ((VAL) == TSC_MCV_4095) || \
+ ((VAL) == TSC_MCV_8191) || \
+ ((VAL) == TSC_MCV_16383))
+
+#define TSC_IODEF_OUT_PP_LOW ((uint32_t)0)
+#define TSC_IODEF_IN_FLOAT (TSC_CR_IODEF)
+#define IS_TSC_IODEF(VAL) (((VAL) == TSC_IODEF_OUT_PP_LOW) || ((VAL) == TSC_IODEF_IN_FLOAT))
+
+#define TSC_SYNC_POL_FALL ((uint32_t)0)
+#define TSC_SYNC_POL_RISE_HIGH (TSC_CR_SYNCPOL)
+#define IS_TSC_SYNC_POL(VAL) (((VAL) == TSC_SYNC_POL_FALL) || ((VAL) == TSC_SYNC_POL_RISE_HIGH))
+
+#define TSC_ACQ_MODE_NORMAL ((uint32_t)0)
+#define TSC_ACQ_MODE_SYNCHRO (TSC_CR_AM)
+#define IS_TSC_ACQ_MODE(VAL) (((VAL) == TSC_ACQ_MODE_NORMAL) || ((VAL) == TSC_ACQ_MODE_SYNCHRO))
+
+#define TSC_IOMODE_UNUSED ((uint32_t)0)
+#define TSC_IOMODE_CHANNEL ((uint32_t)1)
+#define TSC_IOMODE_SHIELD ((uint32_t)2)
+#define TSC_IOMODE_SAMPLING ((uint32_t)3)
+#define IS_TSC_IOMODE(VAL) (((VAL) == TSC_IOMODE_UNUSED) || \
+ ((VAL) == TSC_IOMODE_CHANNEL) || \
+ ((VAL) == TSC_IOMODE_SHIELD) || \
+ ((VAL) == TSC_IOMODE_SAMPLING))
+
+/** @defgroup TSC_interrupts_definition
+ * @{
+ */
+#define TSC_IT_EOA ((uint32_t)TSC_IER_EOAIE)
+#define TSC_IT_MCE ((uint32_t)TSC_IER_MCEIE)
+#define IS_TSC_MCE_IT(VAL) (((VAL) == DISABLE) || ((VAL) == ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_flags_definition
+ * @{
+ */
+#define TSC_FLAG_EOA ((uint32_t)TSC_ISR_EOAF)
+#define TSC_FLAG_MCE ((uint32_t)TSC_ISR_MCEF)
+/**
+ * @}
+ */
+
+#define TSC_NB_OF_GROUPS (8)
+
+#define TSC_GROUP1 ((uint32_t)0x00000001)
+#define TSC_GROUP2 ((uint32_t)0x00000002)
+#define TSC_GROUP3 ((uint32_t)0x00000004)
+#define TSC_GROUP4 ((uint32_t)0x00000008)
+#define TSC_GROUP5 ((uint32_t)0x00000010)
+#define TSC_GROUP6 ((uint32_t)0x00000020)
+#define TSC_GROUP7 ((uint32_t)0x00000040)
+#define TSC_GROUP8 ((uint32_t)0x00000080)
+#define TSC_ALL_GROUPS ((uint32_t)0x000000FF)
+
+#define TSC_GROUP1_IDX ((uint32_t)0)
+#define TSC_GROUP2_IDX ((uint32_t)1)
+#define TSC_GROUP3_IDX ((uint32_t)2)
+#define TSC_GROUP4_IDX ((uint32_t)3)
+#define TSC_GROUP5_IDX ((uint32_t)4)
+#define TSC_GROUP6_IDX ((uint32_t)5)
+#define TSC_GROUP7_IDX ((uint32_t)6)
+#define TSC_GROUP8_IDX ((uint32_t)7)
+#define IS_GROUP_INDEX(VAL) (((VAL) == 0) || (((VAL) > 0) && ((VAL) < TSC_NB_OF_GROUPS)))
+
+#define TSC_GROUP1_IO1 ((uint32_t)0x00000001)
+#define TSC_GROUP1_IO2 ((uint32_t)0x00000002)
+#define TSC_GROUP1_IO3 ((uint32_t)0x00000004)
+#define TSC_GROUP1_IO4 ((uint32_t)0x00000008)
+#define TSC_GROUP1_ALL_IOS ((uint32_t)0x0000000F)
+
+#define TSC_GROUP2_IO1 ((uint32_t)0x00000010)
+#define TSC_GROUP2_IO2 ((uint32_t)0x00000020)
+#define TSC_GROUP2_IO3 ((uint32_t)0x00000040)
+#define TSC_GROUP2_IO4 ((uint32_t)0x00000080)
+#define TSC_GROUP2_ALL_IOS ((uint32_t)0x000000F0)
+
+#define TSC_GROUP3_IO1 ((uint32_t)0x00000100)
+#define TSC_GROUP3_IO2 ((uint32_t)0x00000200)
+#define TSC_GROUP3_IO3 ((uint32_t)0x00000400)
+#define TSC_GROUP3_IO4 ((uint32_t)0x00000800)
+#define TSC_GROUP3_ALL_IOS ((uint32_t)0x00000F00)
+
+#define TSC_GROUP4_IO1 ((uint32_t)0x00001000)
+#define TSC_GROUP4_IO2 ((uint32_t)0x00002000)
+#define TSC_GROUP4_IO3 ((uint32_t)0x00004000)
+#define TSC_GROUP4_IO4 ((uint32_t)0x00008000)
+#define TSC_GROUP4_ALL_IOS ((uint32_t)0x0000F000)
+
+#define TSC_GROUP5_IO1 ((uint32_t)0x00010000)
+#define TSC_GROUP5_IO2 ((uint32_t)0x00020000)
+#define TSC_GROUP5_IO3 ((uint32_t)0x00040000)
+#define TSC_GROUP5_IO4 ((uint32_t)0x00080000)
+#define TSC_GROUP5_ALL_IOS ((uint32_t)0x000F0000)
+
+#define TSC_GROUP6_IO1 ((uint32_t)0x00100000)
+#define TSC_GROUP6_IO2 ((uint32_t)0x00200000)
+#define TSC_GROUP6_IO3 ((uint32_t)0x00400000)
+#define TSC_GROUP6_IO4 ((uint32_t)0x00800000)
+#define TSC_GROUP6_ALL_IOS ((uint32_t)0x00F00000)
+
+#define TSC_GROUP7_IO1 ((uint32_t)0x01000000)
+#define TSC_GROUP7_IO2 ((uint32_t)0x02000000)
+#define TSC_GROUP7_IO3 ((uint32_t)0x04000000)
+#define TSC_GROUP7_IO4 ((uint32_t)0x08000000)
+#define TSC_GROUP7_ALL_IOS ((uint32_t)0x0F000000)
+
+#define TSC_GROUP8_IO1 ((uint32_t)0x10000000)
+#define TSC_GROUP8_IO2 ((uint32_t)0x20000000)
+#define TSC_GROUP8_IO3 ((uint32_t)0x40000000)
+#define TSC_GROUP8_IO4 ((uint32_t)0x80000000)
+#define TSC_GROUP8_ALL_IOS ((uint32_t)0xF0000000)
+
+#define TSC_ALL_GROUPS_ALL_IOS ((uint32_t)0xFFFFFFFF)
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @brief Reset TSC handle state
+ * @param __HANDLE__: TSC handle.
+ * @retval None
+ */
+#define __HAL_TSC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TSC_STATE_RESET)
+
+/**
+ * @brief Enable the TSC peripheral.
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_TSCE)
+
+/**
+ * @brief Disable the TSC peripheral.
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_TSCE))
+
+/**
+ * @brief Start acquisition
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_START_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_START)
+
+/**
+ * @brief Stop acquisition
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_STOP_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_START))
+
+/**
+ * @brief Set IO default mode to output push-pull low
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_OUTPPLOW(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_IODEF))
+
+/**
+ * @brief Set IO default mode to input floating
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_INFLOAT(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_IODEF)
+
+/**
+ * @brief Set synchronization polarity to falling edge
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_FALL(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_SYNCPOL))
+
+/**
+ * @brief Set synchronization polarity to rising edge and high level
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_RISE_HIGH(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_SYNCPOL)
+
+/**
+ * @brief Enable TSC interrupt.
+ * @param __HANDLE__: TSC handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable TSC interrupt.
+ * @param __HANDLE__: TSC handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (uint32_t)(~(__INTERRUPT__)))
+
+/** @brief Check if the specified TSC interrupt source is enabled or disabled.
+ * @param __HANDLE__: TSC Handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Get the selected TSC's flag status.
+ * @param __HANDLE__: TSC handle
+ * @param __FLAG__: TSC flag
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/**
+ * @brief Clear the TSC's pending flag.
+ * @param __HANDLE__: TSC handle
+ * @param __FLAG__: TSC flag
+ * @retval None
+ */
+#define __HAL_TSC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable schmitt trigger hysteresis on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable schmitt trigger hysteresis on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Open analog switch on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_OPEN_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Close analog switch on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_CLOSE_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Enable a group of IOs in channel mode
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of channel IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable a group of IOs in sampling mode
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of sampling IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable acquisition groups
+ * @param __HANDLE__: TSC handle
+ * @param __GX_MASK__: Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR |= (__GX_MASK__))
+
+/**
+ * @brief Disable acquisition groups
+ * @param __HANDLE__: TSC handle
+ * @param __GX_MASK__: Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR &= (uint32_t)(~(__GX_MASK__)))
+
+/** @brief Gets acquisition group status
+ * @param __HANDLE__: TSC Handle
+ * @param __GX_INDEX__: Group index
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_GROUP_STATUS(__HANDLE__, __GX_INDEX__) \
+((((__HANDLE__)->Instance->IOGCSR & (uint32_t)((uint32_t)1 << ((__GX_INDEX__) + (uint32_t)16))) == (uint32_t)((uint32_t)1 << ((__GX_INDEX__) + (uint32_t)16))) ? TSC_GROUP_COMPLETED : TSC_GROUP_ONGOING)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_TSC_Init(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_DeInit(TSC_HandleTypeDef *htsc);
+void HAL_TSC_MspInit(TSC_HandleTypeDef* htsc);
+void HAL_TSC_MspDeInit(TSC_HandleTypeDef* htsc);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_TSC_Start(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Start_IT(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Stop(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Stop_IT(TSC_HandleTypeDef* htsc);
+TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(TSC_HandleTypeDef* htsc, uint32_t gx_index);
+uint32_t HAL_TSC_GroupGetValue(TSC_HandleTypeDef* htsc, uint32_t gx_index);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef* htsc, TSC_IOConfigTypeDef* config);
+HAL_StatusTypeDef HAL_TSC_IODischarge(TSC_HandleTypeDef* htsc, uint32_t choice);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_TSC_StateTypeDef HAL_TSC_GetState(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_PollForAcquisition(TSC_HandleTypeDef* htsc);
+void HAL_TSC_IRQHandler(TSC_HandleTypeDef* htsc);
+
+/* Callback functions *********************************************************/
+void HAL_TSC_ConvCpltCallback(TSC_HandleTypeDef* htsc);
+void HAL_TSC_ErrorCallback(TSC_HandleTypeDef* htsc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_TSC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_uart.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1024 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_UART_H
+#define __STM32F3xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate register is computed using the following formula:
+ - If oversampling is 16 or in LIN mode,
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
+ - If oversampling is 8,
+ Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[3] = 0
+ Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies wether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+
+ uint32_t OneBitSampling; /*!< Specifies wether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
+}UART_InitTypeDef;
+
+/**
+ * @brief UART Advanced Features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
+ Advanced Features may be initialized at the same time .
+ This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref UART_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref UART_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref UART_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref UART_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref UART_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
+
+ uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
+ This parameter can be a value of @ref UART_AutoBaudRate_Enable */
+
+ uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
+ detection is carried out.
+ This parameter can be a value of @ref UARTEx_AutoBaud_Rate_Mode */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref UART_MSB_First */
+} UART_AdvFeatureInitTypeDef;
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UART_WakeUp_Address_Length */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+} UART_WakeUpTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_UART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief HAL UART Error Code structure definition
+ */
+typedef enum
+{
+ HAL_UART_ERROR_NONE = 0x00, /*!< No error */
+ HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_UART_ERROR_FE = 0x04, /*!< frame error */
+ HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_UART_ErrorTypeDef;
+
+/**
+ * @brief UART clock sources definition
+ */
+typedef enum
+{
+ UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ UART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
+ UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ UART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ UART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */
+}UART_ClockSourceTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* UART registers base address */
+
+ UART_InitTypeDef Init; /* UART communication parameters */
+
+ UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* UART Tx Transfer size */
+
+ uint16_t TxXferCount; /* UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* UART Rx Transfer size */
+
+ uint16_t RxXferCount; /* UART Rx Transfer Counter */
+
+ uint16_t Mask; /* UART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_UART_StateTypeDef State; /* UART communication state */
+
+ HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
+
+}UART_HandleTypeDef;
+
+
+
+
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants
+ * @{
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x0000)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x0000)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x0000)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x0000)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+/**
+ * @}
+ */
+
+/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
+#define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
+#define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
+ * @{
+ */
+#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
+#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
+#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
+ ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN UART Local Interconnection Network mode
+ * @{
+ */
+#define UART_LIN_DISABLE ((uint32_t)0x00000000)
+#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
+#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
+ ((LIN) == UART_LIN_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+/**
+ * @}
+ */
+
+
+
+/** @defgroup UART_One_Bit UART One Bit sampling
+ * @{
+ */
+#define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
+#define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
+#define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Tx UART DMA Tx
+ * @{
+ */
+#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
+#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
+#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \
+ ((DMATX) == UART_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Rx UART DMA Rx
+ * @{
+ */
+#define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
+#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
+#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \
+ ((DMARX) == UART_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
+ * @{
+ */
+#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
+#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
+#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
+ ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags UART Status Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define UART_FLAG_REACK ((uint32_t)0x00400000)
+#define UART_FLAG_TEACK ((uint32_t)0x00200000)
+#define UART_FLAG_WUF ((uint32_t)0x00100000)
+#define UART_FLAG_RWU ((uint32_t)0x00080000)
+#define UART_FLAG_SBKF ((uint32_t)0x00040000
+#define UART_FLAG_CMF ((uint32_t)0x00020000)
+#define UART_FLAG_BUSY ((uint32_t)0x00010000)
+#define UART_FLAG_ABRF ((uint32_t)0x00008000)
+#define UART_FLAG_ABRE ((uint32_t)0x00004000)
+#define UART_FLAG_EOBF ((uint32_t)0x00001000)
+#define UART_FLAG_RTOF ((uint32_t)0x00000800)
+#define UART_FLAG_CTS ((uint32_t)0x00000400)
+#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
+#define UART_FLAG_LBDF ((uint32_t)0x00000100)
+#define UART_FLAG_TXE ((uint32_t)0x00000080)
+#define UART_FLAG_TC ((uint32_t)0x00000040)
+#define UART_FLAG_RXNE ((uint32_t)0x00000020)
+#define UART_FLAG_IDLE ((uint32_t)0x00000010)
+#define UART_FLAG_ORE ((uint32_t)0x00000008)
+#define UART_FLAG_NE ((uint32_t)0x00000004)
+#define UART_FLAG_FE ((uint32_t)0x00000002)
+#define UART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UART Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define UART_IT_PE ((uint16_t)0x0028)
+#define UART_IT_TXE ((uint16_t)0x0727)
+#define UART_IT_TC ((uint16_t)0x0626)
+#define UART_IT_RXNE ((uint16_t)0x0525)
+#define UART_IT_IDLE ((uint16_t)0x0424)
+#define UART_IT_LBD ((uint16_t)0x0846)
+#define UART_IT_CTS ((uint16_t)0x096A)
+#define UART_IT_CM ((uint16_t)0x142E)
+#define UART_IT_WUF ((uint16_t)0x1476)
+
+/** Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ */
+#define UART_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define UART_IT_ORE ((uint16_t)0x0300)
+#define UART_IT_NE ((uint16_t)0x0200)
+#define UART_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
+ * @{
+ */
+#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */
+#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
+#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Request_Parameters UART Request Parameters
+ * @{
+ */
+#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
+ * @{
+ */
+#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
+#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
+ UART_ADVFEATURE_TXINVERT_INIT | \
+ UART_ADVFEATURE_RXINVERT_INIT | \
+ UART_ADVFEATURE_DATAINVERT_INIT | \
+ UART_ADVFEATURE_SWAP_INIT | \
+ UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
+ UART_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
+ * @{
+ */
+#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
+ * @{
+ */
+#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
+ ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
+ * @{
+ */
+#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup UART_MSB_First UART Advanced Feature MSB First
+ * @{
+ */
+#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
+#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
+ ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
+#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
+ ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
+ * @{
+ */
+#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
+ * @{
+ */
+#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
+#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
+#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
+#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
+ ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
+ ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
+ * @{
+ */
+#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
+#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
+#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \
+ ((POLARITY) == UART_DE_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
+ * @{
+ */
+#define UART_IT_MASK ((uint32_t)0x001F)
+/**
+ * @}
+ */
+
+/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
+ * @{
+ */
+#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset UART handle state
+ * @param __HANDLE__: UART handle.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral (datasheet: up to five USART/UARTs)
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_REACK: Receive enable ackowledge flag
+ * @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg UART_FLAG_WUF: Wake up from stop mode flag
+ * @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode)
+ * @arg UART_FLAG_SBKF: Send Break flag
+ * @arg UART_FLAG_CMF: Character match flag
+ * @arg UART_FLAG_BUSY: Busy flag
+ * @arg UART_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg UART_FLAG_EOBF: End of block flag
+ * @arg UART_FLAG_RTOF: Receiver timeout flag
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: OverRun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __INTERRUPT__: specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+
+/** @brief Disables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __INTERRUPT__: specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __IT__: specifies the UART interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified UART interrupt source is enabled.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
+
+/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg UART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg UART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg UART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg UART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
+ * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg UART_CLEAR_EOBF: End Of Block Clear Flag
+ * @arg UART_CLEAR_CMF: Character Match Clear Flag
+ * @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific UART request flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg UART_SENDBREAK_REQUEST: Send Break Request
+ * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
+ * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ * @retval None
+ */
+#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__))
+
+/** @brief Enable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief BRR division operation to set BRR register in 8-bit oversampling mode
+ * @param _PCLK_: UART clock
+ * @param _BAUD_: Baud rate set by the user
+ * @retval Division result
+ */
+#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
+
+/** @brief BRR division operation to set BRR register in 16-bit oversampling mode
+ * @param _PCLK_: UART clock
+ * @param _BAUD_: Baud rate set by the user
+ * @retval Division result
+ */
+#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
+
+/** @brief Check UART Baud rate
+ * @param BAUDRATE: Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+
+/** @brief Check UART assertion time
+ * @param TIME: 5-bit value assertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/** @brief Check UART deassertion time
+ * @param TIME: 5-bit value deassertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/**
+ * @}
+ */
+
+/* Include UART HAL Extension module */
+#include "stm32f3xx_hal_uart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+void UART_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_uart_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,430 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_uart_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of UART HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_UART_EX_H
+#define __STM32F3xx_HAL_UART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup UARTEx_Word_Length UART Word Length
+ * @{
+ */
+#if defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8) \
+ || defined (STM32F318xx) || defined (STM32F303x8) || defined (STM32F328xx)
+#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \
+ ((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#else
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#endif
+/**
+ * @}
+ */
+
+
+/** @defgroup UART_WakeUp_Address_Length UART WakeUp Address Length
+ * @{
+ */
+#define UART_ADDRESS_DETECT_4B ((uint32_t)0x00000000)
+#define UART_ADDRESS_DETECT_7B ((uint32_t)USART_CR2_ADDM7)
+#define IS_UART_ADDRESSLENGTH_DETECT(ADDRESS) (((ADDRESS) == UART_ADDRESS_DETECT_4B) || \
+ ((ADDRESS) == UART_ADDRESS_DETECT_7B))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Macros
+ * @{
+ */
+
+/** @brief Reports the UART clock source.
+ * @param __HANDLE__: specifies the UART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval UART clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == UART4) \
+ { \
+ switch(__HAL_RCC_GET_UART4_SOURCE()) \
+ { \
+ case RCC_UART4CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART4CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART4CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART4CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if ((__HANDLE__)->Instance == UART5) \
+ { \
+ switch(__HAL_RCC_GET_UART5_SOURCE()) \
+ { \
+ case RCC_UART5CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART5CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART5CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART5CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#elif defined(STM32F334x8) || defined(STM32F303x8) || defined(STM32F328xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#else
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#endif /* defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) */
+
+
+/** @brief Computes the UART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the UART Handle
+ * @retval none
+ */
+#if defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8) \
+ || defined (STM32F318xx) || defined (STM32F303x8) || defined (STM32F328xx)
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8) \
+ || defined (STM32F318xx) || defined (STM32F303x8) || defined (STM32F328xx) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+/* Peripheral State and Error functions ***************************************/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_UART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_usart.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,553 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_USART_H
+#define __STM32F3xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief HAL USART Error Code structure definition
+ */
+typedef enum
+{
+ HAL_USART_ERROR_NONE = 0x00, /*!< No error */
+ HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_USART_ERROR_FE = 0x04, /*!< frame error */
+ HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_USART_ErrorTypeDef;
+
+/**
+ * @brief USART clock sources definitions
+ */
+typedef enum
+{
+ USART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ USART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
+ USART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ USART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ USART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ USART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */
+}USART_ClockSourceTypeDef;
+
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ USART_InitTypeDef Init; /*!< USART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< USART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< USART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< USART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< USART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< USART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_USART_StateTypeDef State; /*!< USART communication state */
+
+ HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */
+
+}USART_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup USART_Exported_Constants
+ * @{
+ */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x0000)
+#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_0_5) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity USART Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x0000)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode USART Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock USART Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLED ((uint32_t)0x0000)
+#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
+ ((CLOCK) == USART_CLOCK_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x0000)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase USART Clock Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x0000)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit USART Last Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x0000)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup USART_Flags USART Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define USART_FLAG_REACK ((uint32_t)0x00400000)
+#define USART_FLAG_TEACK ((uint32_t)0x00200000)
+#define USART_FLAG_BUSY ((uint32_t)0x00010000)
+#define USART_FLAG_CTS ((uint32_t)0x00000400)
+#define USART_FLAG_CTSIF ((uint32_t)0x00000200)
+#define USART_FLAG_LBDF ((uint32_t)0x00000100)
+#define USART_FLAG_TXE ((uint32_t)0x00000080)
+#define USART_FLAG_TC ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010)
+#define USART_FLAG_ORE ((uint32_t)0x00000008)
+#define USART_FLAG_NE ((uint32_t)0x00000004)
+#define USART_FLAG_FE ((uint32_t)0x00000002)
+#define USART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define USART_IT_PE ((uint16_t)0x0028)
+#define USART_IT_TXE ((uint16_t)0x0727)
+#define USART_IT_TC ((uint16_t)0x0626)
+#define USART_IT_RXNE ((uint16_t)0x0525)
+#define USART_IT_IDLE ((uint16_t)0x0424)
+#define USART_IT_ERR ((uint16_t)0x0060)
+
+#define USART_IT_ORE ((uint16_t)0x0300)
+#define USART_IT_NE ((uint16_t)0x0200)
+#define USART_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags
+ * @{
+ */
+#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Request_Parameters USART Request Parameters
+ * @{
+ */
+#define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define USART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_USART_REQUEST_PARAMETER(PARAM) (((PARAM) == USART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == USART_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interruption_Mask USART interruptions flag mask
+ * @{
+ */
+#define USART_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup USART_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset USART handle state
+ * @param __HANDLE__: USART handle.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+
+/** @brief Checks whether the specified USART flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_REACK: Receive enable ackowledge flag
+ * @arg USART_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg USART_FLAG_BUSY: Busy flag
+ * @arg USART_FLAG_CTS: CTS Change flag
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified USART interrupt.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __INTERRUPT__: specifies the USART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+/** @brief Disables the specified USART interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __INTERRUPT__: specifies the USART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+
+/** @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified USART interrupt source is enabled.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \
+ (((uint16_t)(__IT__)) & USART_IT_MASK)))
+
+
+/** @brief Clears the specified USART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific USART request flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+
+/** @brief Check USART Baud rate
+ * @param BAUDRATE: Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+
+/**
+ * @}
+ */
+
+/* Include USART HAL Extension module */
+#include "stm32f3xx_hal_usart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+
+/* Peripheral Control functions ***********************************************/
+
+/* Peripheral State and Error functions ***************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_usart_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,321 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_usart_ex.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of USART HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_USART_EX_H
+#define __STM32F3xx_HAL_USART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USARTEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup USARTEx_Word_Length USART Word Length
+ * @{
+ */
+#if defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8) \
+ || defined (STM32F318xx)
+#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_7B) || \
+ ((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#else
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#endif
+/**
+ * @}
+ */
+
+
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup USARTEx_Exported_Macros
+ * @{
+ */
+
+
+/** @brief Reports the USART clock source.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval the USART clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F334x8) || defined(STM32F303x8) || defined(STM32F328xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#else
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#endif
+
+/** @brief Computes the USART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the USART Handle
+ * @retval none
+ */
+#if defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8) \
+ || defined (STM32F318xx)
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F301x8) || defined (STM32F302x8) || defined (STM32F334x8) \
+ || defined (STM32F318xx) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_USART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_wwdg.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,266 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 18-June-2014
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_WWDG_H
+#define __STM32F3xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief WWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_WWDG_STATE_RESET = 0x00, /*!< WWDG not yet initialized or disabled */
+ HAL_WWDG_STATE_READY = 0x01, /*!< WWDG initialized and ready for use */
+ HAL_WWDG_STATE_BUSY = 0x02, /*!< WWDG internal process is ongoing */
+ HAL_WWDG_STATE_TIMEOUT = 0x03, /*!< WWDG timeout state */
+ HAL_WWDG_STATE_ERROR = 0x04 /*!< WWDG error state */
+
+}HAL_WWDG_StateTypeDef;
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number lower than Max_Data = 0x80 */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+} WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG Handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< WWDG Locking object */
+
+ __IO HAL_WWDG_StateTypeDef State; /*!< WWDG communication state */
+
+} WWDG_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup WWDG_BitAddress_AliasRegion
+ * @brief WWDG registers bit address in the alias region
+ * @{
+ */
+
+/* --- CFR Register ---*/
+/* Alias word address of EWI bit */
+#define CFR_BASE (uint32_t)(WWDG_BASE + 0x04)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Interrupt_definition
+ * @{
+ */
+#define WWDG_IT_EWI ((uint32_t)WWDG_CFR_EWI)
+
+#define IS_WWDG_IT(IT) ((IT) == WWDG_IT_EWI)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF ((uint32_t)0x0001) /*!< Early Wakeup Interrupt Flag */
+
+#define IS_WWDG_FLAG(FLAG) ((FLAG) == WWDG_FLAG_EWIF))
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 ((uint32_t)0x00000080) /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 ((uint32_t)0x00000100) /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 ((uint32_t)0x00000180) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+
+#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_PRESCALER_1) || \
+ ((PRESCALER) == WWDG_PRESCALER_2) || \
+ ((PRESCALER) == WWDG_PRESCALER_4) || \
+ ((PRESCALER) == WWDG_PRESCALER_8))
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Window
+ * @{
+ */
+#define IS_WWDG_WINDOW(WINDOW) ((WINDOW) <= 0x7F)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Counter
+ * @{
+ */
+#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset WWDG handle state
+ * @param __HANDLE__: WWDG handle.
+ * @retval None
+ */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+ * @brief Enable the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= WWDG_CR_WDGA)
+
+/**
+ * @brief Get the selected WWDG's flag status.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early Wakeup Interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early Wakeup Interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Enable the WWDG early wakeup interrupt.
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__INTERRUPT__) (*(__IO uint32_t *) CFR_BASE |= (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+
+/* Peripheral State functions **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/system_stm32f3xx.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,124 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f3xx.h
+ * @author MCD Application Team
+ * @version V2.0.1
+ * @date 18-June-2014
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F3xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F3XX_H
+#define __SYSTEM_STM32F3XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F3xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F3xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) by calling HAL API function HAL_RCC_ClockConfig()
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F3XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -30,6 +30,7 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
@@ -48,6 +49,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value) {
*obj->reg_set = obj->mask;
} else {
@@ -56,6 +58,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/PeripheralNames.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/PinNames.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,181 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/PortNames.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/device.h Wed Jul 02 13:22:23 2014 +0100 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,71 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/objects.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/startup_stm32f411xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f411re.sct Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F411RE: 512 KB FLASH (0x80000) + 128 KB SRAM (0x20000)
+LR_IROM1 0x08000000 0x80000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x80000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x198) (0x20000-0x198) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/startup_stm32f411xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f411re.sct Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F411RE: 512 KB FLASH (0x80000) + 128 KB SRAM (0x20000)
+LR_IROM1 0x08000000 0x80000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x80000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x198) (0x20000-0x198) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F411RE/cmsis.h Wed Jul 02 13:22:23 2014 +0100 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f4xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/cmsis_nvic.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F411RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 86 vectors = 344 bytes from 0x40 to 0x197
+// Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+#define NVIC_NUM_VECTORS 102
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/core_cm0.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/core_cm0plus.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/core_cm3.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/core_cm4.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/core_cm4_simd.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/core_cmFunc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/core_cmInstr.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/hal_tick.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f4xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM5
+#define TIM_MST_IRQ TIM5_IRQn
+#define TIM_MST_RCC __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f411xe.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,4778 @@
+/**
+ ******************************************************************************
+ * @file stm32f411xe.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 19-June-2014
+ * @brief CMSIS STM32F411xExx Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f401xe
+ * @{
+ */
+
+#ifndef __STM32F401xE_H
+#define __STM32F401xE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ SPI4_IRQn = 84, /*!< SPI4 global Interrupt */
+ SPI5_IRQn = 85 /*!< SPI5 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */
+ __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /* !< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address in the alias region */
+#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */
+#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */
+#define SRAM3_BASE ((uint32_t)0x20020000) /*!< SRAM3(64 KB) base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */
+#define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the bit-band region */
+#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE ((uint32_t)0x2201C000) /*!< SRAM2(16 KB) base address in the bit-band region */
+#define SRAM3_BB_BASE ((uint32_t)0x22020000) /*!< SRAM3(64 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE ((uint32_t)0x42024000) /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END ((uint32_t)0x0807FFFF) /*!< FLASH end address */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800)
+#define SPI5_BASE (APB2PERIPH_BASE + 0x5000)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t )0xE0042000)
+
+/*!< USB registers base address */
+#define USB_OTG_FS_PERIPH_BASE ((uint32_t )0x50000000)
+
+#define USB_OTG_GLOBAL_BASE ((uint32_t )0x000)
+#define USB_OTG_DEVICE_BASE ((uint32_t )0x800)
+#define USB_OTG_IN_ENDPOINT_BASE ((uint32_t )0x900)
+#define USB_OTG_OUT_ENDPOINT_BASE ((uint32_t )0xB00)
+#define USB_OTG_EP_REG_SIZE ((uint32_t )0x20)
+#define USB_OTG_HOST_BASE ((uint32_t )0x400)
+#define USB_OTG_HOST_PORT_BASE ((uint32_t )0x440)
+#define USB_OTG_HOST_CHANNEL_BASE ((uint32_t )0x500)
+#define USB_OTG_HOST_CHANNEL_SIZE ((uint32_t )0x20)
+#define USB_OTG_PCGCCTL_BASE ((uint32_t )0xE00)
+#define USB_OTG_FIFO_BASE ((uint32_t )0x1000)
+#define USB_OTG_FIFO_SIZE ((uint32_t )0x1000)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5 ((SPI_TypeDef *) SPI5_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint32_t)0x00000001) /*!<Analog watchdog flag */
+#define ADC_SR_EOC ((uint32_t)0x00000002) /*!<End of conversion */
+#define ADC_SR_JEOC ((uint32_t)0x00000004) /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!<Injected channel Start flag */
+#define ADC_SR_STRT ((uint32_t)0x00000010) /*!<Regular channel Start flag */
+#define ADC_SR_OVR ((uint32_t)0x00000020) /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!<Scan mode */
+#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES ((uint32_t)0x03000000) /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!<Continuous Conversion */
+#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!<Direct Memory access mode */
+#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!<End of conversion selection */
+#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 ((uint32_t)0x07000000) /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT ((uint32_t)0x0FFF) /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT ((uint32_t)0x0FFF) /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!<Regular data */
+#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_DOVR1 ((uint32_t)0x00000020) /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 ((uint32_t)0x00000100) /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 ((uint32_t)0x00000200) /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 ((uint32_t)0x00000400) /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 ((uint32_t)0x00000800) /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 ((uint32_t)0x00001000) /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_DOVR2 ((uint32_t)0x00002000) /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 ((uint32_t)0x00010000) /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 ((uint32_t)0x00020000) /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 ((uint32_t)0x00040000) /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 ((uint32_t)0x00080000) /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 ((uint32_t)0x00100000) /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_DOVR3 ((uint32_t)0x00200000) /*!<ADC3 DMA overrun flag */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI ((uint32_t)0x0000001F) /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CCR_DELAY ((uint32_t)0x00000F00) /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define ADC_CCR_DDS ((uint32_t)0x00002000) /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA ((uint32_t)0x0000C000) /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define ADC_CCR_DMA_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CCR_VBATE ((uint32_t)0x00400000) /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 ((uint32_t)0x0000FFFF) /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 ((uint32_t)0xFFFF0000) /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint32_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x01) /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0 ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1 ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2 ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0 ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1 ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0 ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1 ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK ((uint32_t)0x00100000)
+#define DMA_SxCR_CT ((uint32_t)0x00080000)
+#define DMA_SxCR_DBM ((uint32_t)0x00040000)
+#define DMA_SxCR_PL ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0 ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1 ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0 ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1 ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0 ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1 ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0 ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1 ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE ((uint32_t)0x00000002)
+#define DMA_SxCR_EN ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0 ((uint32_t)0x00000001)
+#define DMA_SxNDT_1 ((uint32_t)0x00000002)
+#define DMA_SxNDT_2 ((uint32_t)0x00000004)
+#define DMA_SxNDT_3 ((uint32_t)0x00000008)
+#define DMA_SxNDT_4 ((uint32_t)0x00000010)
+#define DMA_SxNDT_5 ((uint32_t)0x00000020)
+#define DMA_SxNDT_6 ((uint32_t)0x00000040)
+#define DMA_SxNDT_7 ((uint32_t)0x00000080)
+#define DMA_SxNDT_8 ((uint32_t)0x00000100)
+#define DMA_SxNDT_9 ((uint32_t)0x00000200)
+#define DMA_SxNDT_10 ((uint32_t)0x00000400)
+#define DMA_SxNDT_11 ((uint32_t)0x00000800)
+#define DMA_SxNDT_12 ((uint32_t)0x00001000)
+#define DMA_SxNDT_13 ((uint32_t)0x00002000)
+#define DMA_SxNDT_14 ((uint32_t)0x00004000)
+#define DMA_SxNDT_15 ((uint32_t)0x00008000)
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0 ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1 ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2 ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0 ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1 ((uint32_t)0x00000002)
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3 ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3 ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3 ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3 ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2 ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2 ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2 ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2 ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2 ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1 ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1 ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1 ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1 ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1 ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0 ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0 ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0 ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0 ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7 ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7 ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7 ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7 ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6 ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6 ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6 ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6 ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6 ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5 ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5 ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5 ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5 ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5 ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4 ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4 ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4 ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4 ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3 ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3 ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3 ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3 ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2 ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2 ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2 ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2 ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2 ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1 ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1 ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1 ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1 ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1 ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0 ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0 ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0 ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0 ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7 ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7 ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7 ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7 ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6 ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6 ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6 ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6 ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6 ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5 ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5 ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5 ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5 ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5 ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4 ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4 ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4 ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4 ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4 ((uint32_t)0x00000001)
+
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x0000000F)
+#define FLASH_ACR_LATENCY_0WS ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS ((uint32_t)0x00000007)
+
+#define FLASH_ACR_PRFTEN ((uint32_t)0x00000100)
+#define FLASH_ACR_ICEN ((uint32_t)0x00000200)
+#define FLASH_ACR_DCEN ((uint32_t)0x00000400)
+#define FLASH_ACR_ICRST ((uint32_t)0x00000800)
+#define FLASH_ACR_DCRST ((uint32_t)0x00001000)
+#define FLASH_ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+#define FLASH_ACR_BYTE2_ADDRESS ((uint32_t)0x40023C03)
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP ((uint32_t)0x00000001)
+#define FLASH_SR_SOP ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR ((uint32_t)0x00000040)
+#define FLASH_SR_PGSERR ((uint32_t)0x00000080)
+#define FLASH_SR_BSY ((uint32_t)0x00010000)
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001)
+#define FLASH_CR_SER ((uint32_t)0x00000002)
+#define FLASH_CR_MER ((uint32_t)0x00000004)
+#define FLASH_CR_SNB ((uint32_t)0x000000F8)
+#define FLASH_CR_SNB_0 ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1 ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2 ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3 ((uint32_t)0x00000040)
+#define FLASH_CR_SNB_4 ((uint32_t)0x00000080)
+#define FLASH_CR_PSIZE ((uint32_t)0x00000300)
+#define FLASH_CR_PSIZE_0 ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1 ((uint32_t)0x00000200)
+#define FLASH_CR_STRT ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE ((uint32_t)0x01000000)
+#define FLASH_CR_LOCK ((uint32_t)0x80000000)
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV_0 ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1 ((uint32_t)0x00000008)
+#define FLASH_OPTCR_BOR_LEV ((uint32_t)0x0000000C)
+
+#define FLASH_OPTCR_WDG_SW ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP ((uint32_t)0x0000FF00)
+#define FLASH_OPTCR_RDP_0 ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1 ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2 ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3 ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4 ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5 ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6 ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7 ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR_nWRP_11 ((uint32_t)0x08000000)
+
+/****************** Bits definition for FLASH_OPTCR1 register ***************/
+#define FLASH_OPTCR1_nWRP ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR1_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR1_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR1_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR1_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR1_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR1_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR1_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR1_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR1_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR1_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR1_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR1_nWRP_11 ((uint32_t)0x08000000)
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000)
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0 GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1 GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2 GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3 GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4 GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5 GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6 GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7 GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8 GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9 GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10 GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11 GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12 GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13 GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14 GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15 GPIO_IDR_IDR_15
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000)
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0 GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1 GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2 GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3 GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4 GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5 GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6 GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7 GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8 GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9 GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10 GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11 GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12 GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13 GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14 GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15 GPIO_ODR_ODR_15
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS ((uint32_t)0x00000002) /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE ((uint32_t)0x00000008) /*!<SMBus Type */
+#define I2C_CR1_ENARP ((uint32_t)0x00000010) /*!<ARP Enable */
+#define I2C_CR1_ENPEC ((uint32_t)0x00000020) /*!<PEC Enable */
+#define I2C_CR1_ENGC ((uint32_t)0x00000040) /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00000080) /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START ((uint32_t)0x00000100) /*!<Start Generation */
+#define I2C_CR1_STOP ((uint32_t)0x00000200) /*!<Stop Generation */
+#define I2C_CR1_ACK ((uint32_t)0x00000400) /*!<Acknowledge Enable */
+#define I2C_CR1_POS ((uint32_t)0x00000800) /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC ((uint32_t)0x00001000) /*!<Packet Error Checking */
+#define I2C_CR1_ALERT ((uint32_t)0x00002000) /*!<SMBus Alert */
+#define I2C_CR1_SWRST ((uint32_t)0x00008000) /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ ((uint32_t)0x0000003F) /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN ((uint32_t)0x00000100) /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN ((uint32_t)0x00000200) /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN ((uint32_t)0x00000400) /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN ((uint32_t)0x00000800) /*!<DMA Requests Enable */
+#define I2C_CR2_LAST ((uint32_t)0x00001000) /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define I2C_OAR1_ADD1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define I2C_OAR1_ADD2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define I2C_OAR1_ADD3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define I2C_OAR1_ADD4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define I2C_OAR1_ADD5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define I2C_OAR1_ADD6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define I2C_OAR1_ADD7 ((uint32_t)0x00000080) /*!<Bit 7 */
+#define I2C_OAR1_ADD8 ((uint32_t)0x00000100) /*!<Bit 8 */
+#define I2C_OAR1_ADD9 ((uint32_t)0x00000200) /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE ((uint32_t)0x00008000) /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL ((uint32_t)0x00000001) /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 ((uint32_t)0x000000FE) /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR ((uint32_t)0x000000FF) /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB ((uint32_t)0x00000001) /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR ((uint32_t)0x00000002) /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF ((uint32_t)0x00000004) /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 ((uint32_t)0x00000008) /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF ((uint32_t)0x00000010) /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE ((uint32_t)0x00000040) /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE ((uint32_t)0x00000080) /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR ((uint32_t)0x00000100) /*!<Bus Error */
+#define I2C_SR1_ARLO ((uint32_t)0x00000200) /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF ((uint32_t)0x00000400) /*!<Acknowledge Failure */
+#define I2C_SR1_OVR ((uint32_t)0x00000800) /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR ((uint32_t)0x00001000) /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT ((uint32_t)0x00004000) /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT ((uint32_t)0x00008000) /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL ((uint32_t)0x00000001) /*!<Master/Slave */
+#define I2C_SR2_BUSY ((uint32_t)0x00000002) /*!<Bus Busy */
+#define I2C_SR2_TRA ((uint32_t)0x00000004) /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL ((uint32_t)0x00000010) /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT ((uint32_t)0x00000020) /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST ((uint32_t)0x00000040) /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF ((uint32_t)0x00000080) /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC ((uint32_t)0x0000FF00) /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR ((uint32_t)0x00000FFF) /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY ((uint32_t)0x00004000) /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS ((uint32_t)0x00008000) /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE ((uint32_t)0x0000003F) /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/****************** Bit definition for I2C_FLTR register *******************/
+#define I2C_FLTR_DNF ((uint32_t)0x0000000F) /*!<Digital Noise Filter */
+#define I2C_FLTR_ANOFF ((uint32_t)0x00000010) /*!<Analog Noise Filter OFF */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!<Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!<Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!<Watchdog counter reload value update */
+
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS ((uint32_t)0x00000200) /*!< Flash power down in Stop mode */
+#define PWR_CR_LPLVDS ((uint32_t)0x00000400) /*!< Low Power Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_MRLVDS ((uint32_t)0x00000800) /*!< Main Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_ADCDC1 ((uint32_t)0x00002000) /*!< Refer to AN4073 on how to use this bit */
+
+#define PWR_CR_VOS ((uint32_t)0x0000C000) /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define PWR_CR_VOS_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define PWR_CR_VOS_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+
+#define PWR_CR_FMSSR ((uint32_t)0x00100000) /*!< Flash Memory Sleep System Run */
+#define PWR_CR_FISSR ((uint32_t)0x00200000) /*!< Flash Interface Stop while System Run */
+/* Legacy define */
+#define PWR_CR_PMODE PWR_CR_VOS
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_BRR ((uint32_t)0x00000008) /*!< Backup regulator ready */
+#define PWR_CSR_EWUP ((uint32_t)0x00000100) /*!< Enable WKUP pin */
+#define PWR_CSR_BRE ((uint32_t)0x00000200) /*!< Backup regulator enable */
+#define PWR_CSR_VOSRDY ((uint32_t)0x00004000) /*!< Regulator voltage scaling output selection ready */
+
+/* Legacy define */
+#define PWR_CSR_REGRDY PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+#define RCC_CR_PLLI2SON ((uint32_t)0x04000000)
+#define RCC_CR_PLLI2SRDY ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM ((uint32_t)0x0000003F)
+#define RCC_PLLCFGR_PLLM_0 ((uint32_t)0x00000001)
+#define RCC_PLLCFGR_PLLM_1 ((uint32_t)0x00000002)
+#define RCC_PLLCFGR_PLLM_2 ((uint32_t)0x00000004)
+#define RCC_PLLCFGR_PLLM_3 ((uint32_t)0x00000008)
+#define RCC_PLLCFGR_PLLM_4 ((uint32_t)0x00000010)
+#define RCC_PLLCFGR_PLLM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLCFGR_PLLN ((uint32_t)0x00007FC0)
+#define RCC_PLLCFGR_PLLN_0 ((uint32_t)0x00000040)
+#define RCC_PLLCFGR_PLLN_1 ((uint32_t)0x00000080)
+#define RCC_PLLCFGR_PLLN_2 ((uint32_t)0x00000100)
+#define RCC_PLLCFGR_PLLN_3 ((uint32_t)0x00000200)
+#define RCC_PLLCFGR_PLLN_4 ((uint32_t)0x00000400)
+#define RCC_PLLCFGR_PLLN_5 ((uint32_t)0x00000800)
+#define RCC_PLLCFGR_PLLN_6 ((uint32_t)0x00001000)
+#define RCC_PLLCFGR_PLLN_7 ((uint32_t)0x00002000)
+#define RCC_PLLCFGR_PLLN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLCFGR_PLLP ((uint32_t)0x00030000)
+#define RCC_PLLCFGR_PLLP_0 ((uint32_t)0x00010000)
+#define RCC_PLLCFGR_PLLP_1 ((uint32_t)0x00020000)
+
+#define RCC_PLLCFGR_PLLSRC ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSE ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSI ((uint32_t)0x00000000)
+
+#define RCC_PLLCFGR_PLLQ ((uint32_t)0x0F000000)
+#define RCC_PLLCFGR_PLLQ_0 ((uint32_t)0x01000000)
+#define RCC_PLLCFGR_PLLQ_1 ((uint32_t)0x02000000)
+#define RCC_PLLCFGR_PLLQ_2 ((uint32_t)0x04000000)
+#define RCC_PLLCFGR_PLLQ_3 ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00001C00) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00001000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00001400) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00001800) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00001C00) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x0000E000) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00008000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x0000A000) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x0000C000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x0000E000) /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE ((uint32_t)0x001F0000)
+#define RCC_CFGR_RTCPRE_0 ((uint32_t)0x00010000)
+#define RCC_CFGR_RTCPRE_1 ((uint32_t)0x00020000)
+#define RCC_CFGR_RTCPRE_2 ((uint32_t)0x00040000)
+#define RCC_CFGR_RTCPRE_3 ((uint32_t)0x00080000)
+#define RCC_CFGR_RTCPRE_4 ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 ((uint32_t)0x00600000)
+#define RCC_CFGR_MCO1_0 ((uint32_t)0x00200000)
+#define RCC_CFGR_MCO1_1 ((uint32_t)0x00400000)
+
+#define RCC_CFGR_I2SSRC ((uint32_t)0x00800000)
+
+#define RCC_CFGR_MCO1PRE ((uint32_t)0x07000000)
+#define RCC_CFGR_MCO1PRE_0 ((uint32_t)0x01000000)
+#define RCC_CFGR_MCO1PRE_1 ((uint32_t)0x02000000)
+#define RCC_CFGR_MCO1PRE_2 ((uint32_t)0x04000000)
+
+#define RCC_CFGR_MCO2PRE ((uint32_t)0x38000000)
+#define RCC_CFGR_MCO2PRE_0 ((uint32_t)0x08000000)
+#define RCC_CFGR_MCO2PRE_1 ((uint32_t)0x10000000)
+#define RCC_CFGR_MCO2PRE_2 ((uint32_t)0x20000000)
+
+#define RCC_CFGR_MCO2 ((uint32_t)0xC0000000)
+#define RCC_CFGR_MCO2_0 ((uint32_t)0x40000000)
+#define RCC_CFGR_MCO2_1 ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001)
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002)
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004)
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008)
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010)
+#define RCC_CIR_PLLI2SRDYF ((uint32_t)0x00000020)
+
+#define RCC_CIR_CSSF ((uint32_t)0x00000080)
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100)
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200)
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400)
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800)
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000)
+#define RCC_CIR_PLLI2SRDYIE ((uint32_t)0x00002000)
+
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000)
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000)
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000)
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000)
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000)
+#define RCC_CIR_PLLI2SRDYC ((uint32_t)0x00200000)
+
+#define RCC_CIR_CSSC ((uint32_t)0x00800000)
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST ((uint32_t)0x00000001)
+#define RCC_AHB1RSTR_GPIOBRST ((uint32_t)0x00000002)
+#define RCC_AHB1RSTR_GPIOCRST ((uint32_t)0x00000004)
+#define RCC_AHB1RSTR_GPIODRST ((uint32_t)0x00000008)
+#define RCC_AHB1RSTR_GPIOERST ((uint32_t)0x00000010)
+#define RCC_AHB1RSTR_GPIOHRST ((uint32_t)0x00000080)
+#define RCC_AHB1RSTR_CRCRST ((uint32_t)0x00001000)
+#define RCC_AHB1RSTR_DMA1RST ((uint32_t)0x00200000)
+#define RCC_AHB1RSTR_DMA2RST ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2RSTR register **************/
+#define RCC_AHB2RSTR_OTGFSRST ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3RSTR register **************/
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001)
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002)
+#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004)
+#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008)
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800)
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000)
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000)
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000)
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000)
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000)
+#define RCC_APB1RSTR_I2C3RST ((uint32_t)0x00800000)
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000)
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000001)
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00000010)
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020)
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000100)
+#define RCC_APB2RSTR_SDIORST ((uint32_t)0x00000800)
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000)
+#define RCC_APB2RSTR_SPI4RST ((uint32_t)0x00002000)
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00004000)
+#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00010000)
+#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00020000)
+#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00040000)
+#define RCC_APB2RSTR_SPI5RST ((uint32_t)0x00100000)
+
+/* Old SPI1RST bit definition, maintained for legacy purpose */
+#define RCC_APB2RSTR_SPI1 RCC_APB2RSTR_SPI1RST
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN ((uint32_t)0x00000001)
+#define RCC_AHB1ENR_GPIOBEN ((uint32_t)0x00000002)
+#define RCC_AHB1ENR_GPIOCEN ((uint32_t)0x00000004)
+#define RCC_AHB1ENR_GPIODEN ((uint32_t)0x00000008)
+#define RCC_AHB1ENR_GPIOEEN ((uint32_t)0x00000010)
+#define RCC_AHB1ENR_GPIOHEN ((uint32_t)0x00000080)
+#define RCC_AHB1ENR_CRCEN ((uint32_t)0x00001000)
+#define RCC_AHB1ENR_BKPSRAMEN ((uint32_t)0x00040000)
+#define RCC_AHB1ENR_CCMDATARAMEN ((uint32_t)0x00100000)
+#define RCC_AHB1ENR_DMA1EN ((uint32_t)0x00200000)
+#define RCC_AHB1ENR_DMA2EN ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2ENR register ***************/
+#define RCC_AHB2ENR_OTGFSEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3ENR register ***************/
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001)
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002)
+#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004)
+#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008)
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800)
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000)
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000)
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000)
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000)
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000)
+#define RCC_APB1ENR_I2C3EN ((uint32_t)0x00800000)
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000)
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000001)
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00000010)
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020)
+#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000100)
+#define RCC_APB2ENR_SDIOEN ((uint32_t)0x00000800)
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000)
+#define RCC_APB2ENR_SPI4EN ((uint32_t)0x00002000)
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00004000)
+#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00010000)
+#define RCC_APB2ENR_TIM10EN ((uint32_t)0x00020000)
+#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00040000)
+#define RCC_APB2ENR_SPI5EN ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN ((uint32_t)0x00000001)
+#define RCC_AHB1LPENR_GPIOBLPEN ((uint32_t)0x00000002)
+#define RCC_AHB1LPENR_GPIOCLPEN ((uint32_t)0x00000004)
+#define RCC_AHB1LPENR_GPIODLPEN ((uint32_t)0x00000008)
+#define RCC_AHB1LPENR_GPIOELPEN ((uint32_t)0x00000010)
+#define RCC_AHB1LPENR_GPIOHLPEN ((uint32_t)0x00000080)
+#define RCC_AHB1LPENR_CRCLPEN ((uint32_t)0x00001000)
+#define RCC_AHB1LPENR_FLITFLPEN ((uint32_t)0x00008000)
+#define RCC_AHB1LPENR_SRAM1LPEN ((uint32_t)0x00010000)
+#define RCC_AHB1LPENR_SRAM2LPEN ((uint32_t)0x00020000)
+#define RCC_AHB1LPENR_BKPSRAMLPEN ((uint32_t)0x00040000)
+#define RCC_AHB1LPENR_SRAM3LPEN ((uint32_t)0x00080000)
+#define RCC_AHB1LPENR_DMA1LPEN ((uint32_t)0x00200000)
+#define RCC_AHB1LPENR_DMA2LPEN ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2LPENR register *************/
+#define RCC_AHB2LPENR_OTGFSLPEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3LPENR register *************/
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001)
+#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002)
+#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004)
+#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008)
+#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800)
+#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000)
+#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000)
+#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000)
+#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000)
+#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000)
+#define RCC_APB1LPENR_I2C3LPEN ((uint32_t)0x00800000)
+#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000)
+#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN ((uint32_t)0x00000001)
+#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00000010)
+#define RCC_APB2LPENR_USART6LPEN ((uint32_t)0x00000020)
+#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000100)
+#define RCC_APB2LPENR_SDIOLPEN ((uint32_t)0x00000800)
+#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000)
+#define RCC_APB2LPENR_SPI4LPEN ((uint32_t)0x00002000)
+#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00004000)
+#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00010000)
+#define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00020000)
+#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00040000)
+#define RCC_APB2LPENR_SPI5LPEN ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001)
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002)
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004)
+#define RCC_BDCR_LSEMOD ((uint32_t)0x00000008)
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300)
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100)
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200)
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000)
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000)
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001)
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002)
+#define RCC_CSR_RMVF ((uint32_t)0x01000000)
+#define RCC_CSR_BORRSTF ((uint32_t)0x02000000)
+#define RCC_CSR_PADRSTF ((uint32_t)0x04000000)
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000)
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000)
+#define RCC_CSR_WDGRSTF ((uint32_t)0x20000000)
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000)
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER ((uint32_t)0x00001FFF)
+#define RCC_SSCGR_INCSTEP ((uint32_t)0x0FFFE000)
+#define RCC_SSCGR_SPREADSEL ((uint32_t)0x40000000)
+#define RCC_SSCGR_SSCGEN ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_PLLI2SCFGR register ************/
+#define RCC_PLLI2SCFGR_PLLI2SM ((uint32_t)0x0000003F)
+#define RCC_PLLI2SCFGR_PLLI2SM_0 ((uint32_t)0x00000001)
+#define RCC_PLLI2SCFGR_PLLI2SM_1 ((uint32_t)0x00000002)
+#define RCC_PLLI2SCFGR_PLLI2SM_2 ((uint32_t)0x00000004)
+#define RCC_PLLI2SCFGR_PLLI2SM_3 ((uint32_t)0x00000008)
+#define RCC_PLLI2SCFGR_PLLI2SM_4 ((uint32_t)0x00000010)
+#define RCC_PLLI2SCFGR_PLLI2SM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLI2SCFGR_PLLI2SN ((uint32_t)0x00007FC0)
+#define RCC_PLLI2SCFGR_PLLI2SN_0 ((uint32_t)0x00000040)
+#define RCC_PLLI2SCFGR_PLLI2SN_1 ((uint32_t)0x00000080)
+#define RCC_PLLI2SCFGR_PLLI2SN_2 ((uint32_t)0x00000100)
+#define RCC_PLLI2SCFGR_PLLI2SN_3 ((uint32_t)0x00000200)
+#define RCC_PLLI2SCFGR_PLLI2SN_4 ((uint32_t)0x00000400)
+#define RCC_PLLI2SCFGR_PLLI2SN_5 ((uint32_t)0x00000800)
+#define RCC_PLLI2SCFGR_PLLI2SN_6 ((uint32_t)0x00001000)
+#define RCC_PLLI2SCFGR_PLLI2SN_7 ((uint32_t)0x00002000)
+#define RCC_PLLI2SCFGR_PLLI2SN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLI2SCFGR_PLLI2SR ((uint32_t)0x70000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_0 ((uint32_t)0x10000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_1 ((uint32_t)0x20000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_2 ((uint32_t)0x40000000)
+
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_DCE ((uint32_t)0x00000080)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00001FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS ((uint32_t)0x00000080)
+#define RTC_CALIBR_DC ((uint32_t)0x0000001F)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TSINSEL ((uint32_t)0x00020000)
+#define RTC_TAFCR_TAMPINSEL ((uint32_t)0x00010000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
+
+
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL ((uint32_t)0x03) /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 ((uint32_t)0x01) /*!<Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 ((uint32_t)0x02) /*!<Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV ((uint32_t)0x00FF) /*!<Clock divide factor */
+#define SDIO_CLKCR_CLKEN ((uint32_t)0x0100) /*!<Clock enable bit */
+#define SDIO_CLKCR_PWRSAV ((uint32_t)0x0200) /*!<Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS ((uint32_t)0x0400) /*!<Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS ((uint32_t)0x1800) /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 ((uint32_t)0x0800) /*!<Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 ((uint32_t)0x1000) /*!<Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE ((uint32_t)0x2000) /*!<SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN ((uint32_t)0x4000) /*!<HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!<Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX ((uint32_t)0x003F) /*!<Command Index */
+
+#define SDIO_CMD_WAITRESP ((uint32_t)0x00C0) /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 ((uint32_t)0x0040) /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 ((uint32_t)0x0080) /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT ((uint32_t)0x0100) /*!<CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND ((uint32_t)0x0200) /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN ((uint32_t)0x0400) /*!<Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND ((uint32_t)0x0800) /*!<SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL ((uint32_t)0x1000) /*!<Enable CMD completion */
+#define SDIO_CMD_NIEN ((uint32_t)0x2000) /*!<Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD ((uint32_t)0x4000) /*!<CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD ((uint32_t)0x3F) /*!<Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!<Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!<Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN ((uint32_t)0x0001) /*!<Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR ((uint32_t)0x0002) /*!<Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE ((uint32_t)0x0004) /*!<Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN ((uint32_t)0x0008) /*!<DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE ((uint32_t)0x00F0) /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define SDIO_DCTRL_RWSTART ((uint32_t)0x0100) /*!<Read wait start */
+#define SDIO_DCTRL_RWSTOP ((uint32_t)0x0200) /*!<Read wait stop */
+#define SDIO_DCTRL_RWMOD ((uint32_t)0x0400) /*!<Read wait mode */
+#define SDIO_DCTRL_SDIOEN ((uint32_t)0x0800) /*!<SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!<Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!<Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!<Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!<Command response timeout */
+#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!<Data timeout */
+#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!<Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!<Received FIFO overrun error */
+#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!<Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!<Command sent (no response required) */
+#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!<Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!<Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!<Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!<Command transfer in progress */
+#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!<Data transmit in progress */
+#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!<Data receive in progress */
+#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!<Transmit FIFO full */
+#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!<Receive FIFO full */
+#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!<Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!<Receive FIFO empty */
+#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!<Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!<Data available in receive FIFO */
+#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!<SDIO interrupt received */
+#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!<CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!<DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!<CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!<DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!<TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!<RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!<CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!<CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!<DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!<STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!<DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!<SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!<CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!<Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!<Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!<Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!<Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!<Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!<Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!<Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!<Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!<Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!<Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!<Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!<CCommand Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!<Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!<Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!<Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!<Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!<Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!<Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!<Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!<Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!<Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!<Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!<Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!<Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!<Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!<Master Selection */
+
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!<Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!<Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!<Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!<Receive only */
+#define SPI_CR1_DFF ((uint32_t)0x00000800) /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!<SS Output Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!<Frame Format */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!<Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!<Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!<CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!<Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!<Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!<Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!<Frame format error flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000007) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001)
+#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002)
+#define SYSCFG_MEMRMP_MEM_MODE_2 ((uint32_t)0x00000004)
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_ADC1DC2 ((uint32_t)0x00010000) /*!< Refer to AN4073 on how to use this bit */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0xF000) /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint32_t)0x0003) /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint32_t)0x0004) /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH ((uint32_t)0x0007) /*!<PH[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint32_t)0x0030) /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint32_t)0x0040) /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH ((uint32_t)0x0070) /*!<PH[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint32_t)0x0300) /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint32_t)0x0400) /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH ((uint32_t)0x0700) /*!<PH[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint32_t)0x3000) /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint32_t)0x4000) /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH ((uint32_t)0x7000) /*!<PH[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0xF000) /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint32_t)0x0003) /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint32_t)0x0004) /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH ((uint32_t)0x0007) /*!<PH[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint32_t)0x0030) /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint32_t)0x0040) /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH ((uint32_t)0x0070) /*!<PH[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint32_t)0x0300) /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint32_t)0x0400) /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH ((uint32_t)0x0700) /*!<PH[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint32_t)0x3000) /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint32_t)0x4000) /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH ((uint32_t)0x7000) /*!<PH[7] pin */
+
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0xF000) /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint32_t)0x0003) /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint32_t)0x0004) /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH ((uint32_t)0x0007) /*!<PH[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint32_t)0x0030) /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint32_t)0x0040) /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH ((uint32_t)0x0070) /*!<PH[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint32_t)0x0300) /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint32_t)0x0400) /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH ((uint32_t)0x0700) /*!<PH[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint32_t)0x3000) /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint32_t)0x4000) /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH ((uint32_t)0x7000) /*!<PH[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0xF000) /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint32_t)0x0003) /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint32_t)0x0004) /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH ((uint32_t)0x0007) /*!<PH[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint32_t)0x0030) /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint32_t)0x0040) /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH ((uint32_t)0x0070) /*!<PH[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint32_t)0x0300) /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint32_t)0x0400) /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH ((uint32_t)0x0700) /*!<PH[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint32_t)0x3000) /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint32_t)0x4000) /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH ((uint32_t)0x7000) /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD ((uint32_t)0x00000001) /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY ((uint32_t)0x00000100) /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint32_t)0x0001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x0002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x0004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x0008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x0010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x0060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x0020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x0040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x0080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x0300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint32_t)0x0001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x0004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x0008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x0070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x0080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x0100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x0200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x0400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x0800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x1000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x2000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x4000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint32_t)0x0007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x0004) /*!<Bit 2 */
+
+#define TIM_SMCR_TS ((uint32_t)0x0070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x0080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x0F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x0200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x0400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x0800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x3000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x2000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x4000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x8000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint32_t)0x0001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x0002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x0004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x0008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x0010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x0020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x0040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x0080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x0100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x0200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x0400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x0800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x1000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x2000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x4000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint32_t)0x0001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x0002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x0004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x0008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x0010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x0020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x0040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x0080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x0200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x0400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x0800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x1000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint32_t)0x01) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x02) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x04) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x08) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x10) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x20) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x40) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x80) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x0003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x0004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x0008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x0070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x0080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x0300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x0400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x0800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x7000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x8000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x00F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x0C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0xF000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x8000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x0003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x0004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x0008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x0070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x0080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x0300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x0400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x0800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x7000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x8000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x00F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x0C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0xF000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x8000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint32_t)0x0001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x0002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x0004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x0008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x0010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x0020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x0040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x0080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x0100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x0200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x0400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x0800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x1000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x2000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x8000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint32_t)0xFFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint32_t)0xFF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0xFFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0xFFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0xFFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0xFFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint32_t)0x00FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x0040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x0080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x0300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x0400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x0800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x1000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x2000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x4000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x8000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint32_t)0x001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x0010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x1F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x0200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x0400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x0800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x1000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint32_t)0xFFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP ((uint32_t)0x00C0) /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 ((uint32_t)0x0040) /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 ((uint32_t)0x0080) /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP ((uint32_t)0x0C00) /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE ((uint32_t)0x0001) /*!<Parity Error */
+#define USART_SR_FE ((uint32_t)0x0002) /*!<Framing Error */
+#define USART_SR_NE ((uint32_t)0x0004) /*!<Noise Error Flag */
+#define USART_SR_ORE ((uint32_t)0x0008) /*!<OverRun Error */
+#define USART_SR_IDLE ((uint32_t)0x0010) /*!<IDLE line detected */
+#define USART_SR_RXNE ((uint32_t)0x0020) /*!<Read Data Register Not Empty */
+#define USART_SR_TC ((uint32_t)0x0040) /*!<Transmission Complete */
+#define USART_SR_TXE ((uint32_t)0x0080) /*!<Transmit Data Register Empty */
+#define USART_SR_LBD ((uint32_t)0x0100) /*!<LIN Break Detection Flag */
+#define USART_SR_CTS ((uint32_t)0x0200) /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR ((uint32_t)0x01FF) /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction ((uint32_t)0x000F) /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa ((uint32_t)0xFFF0) /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK ((uint32_t)0x0001) /*!<Send Break */
+#define USART_CR1_RWU ((uint32_t)0x0002) /*!<Receiver wakeup */
+#define USART_CR1_RE ((uint32_t)0x0004) /*!<Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x0008) /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x0010) /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x0020) /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x0040) /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x0080) /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x0100) /*!<PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x0200) /*!<Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x0400) /*!<Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x0800) /*!<Wakeup method */
+#define USART_CR1_M ((uint32_t)0x1000) /*!<Word length */
+#define USART_CR1_UE ((uint32_t)0x2000) /*!<USART Enable */
+#define USART_CR1_OVER8 ((uint32_t)0x8000) /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD ((uint32_t)0x000F) /*!<Address of the USART node */
+#define USART_CR2_LBDL ((uint32_t)0x0020) /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x0040) /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x0100) /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x0200) /*!<Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x0400) /*!<Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x0800) /*!<Clock Enable */
+
+#define USART_CR2_STOP ((uint32_t)0x3000) /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x2000) /*!<Bit 1 */
+
+#define USART_CR2_LINEN ((uint32_t)0x4000) /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x0001) /*!<Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x0002) /*!<IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x0004) /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x0008) /*!<Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x0010) /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x0020) /*!<Smartcard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x0040) /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x0080) /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x0100) /*!<RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x0200) /*!<CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x0400) /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x0800) /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x00FF) /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define USART_GTPR_PSC_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define USART_GTPR_PSC_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define USART_GTPR_PSC_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define USART_GTPR_PSC_4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define USART_GTPR_PSC_5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define USART_GTPR_PSC_6 ((uint32_t)0x0040) /*!<Bit 6 */
+#define USART_GTPR_PSC_7 ((uint32_t)0x0080) /*!<Bit 7 */
+
+#define USART_GTPR_GT ((uint32_t)0xFF00) /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020)
+#define DBGMCU_APB1_FZ_DBG_TIM12_STOP ((uint32_t)0x00000040)
+#define DBGMCU_APB1_FZ_DBG_TIM13_STOP ((uint32_t)0x00000080)
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP ((uint32_t)0x02000000)
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP ((uint32_t)0x04000000)
+/* Old IWDGSTOP bit definition, maintained for legacy purpose */
+#define DBGMCU_APB1_FZ_DBG_IWDEG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB2_FZ_DBG_TIM8_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00010000)
+#define DBGMCU_APB2_FZ_DBG_TIM10_STOP ((uint32_t)0x00020000)
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00040000)
+
+/******************************************************************************/
+/* */
+/* USB_OTG */
+/* */
+/******************************************************************************/
+/******************** Bit definition forUSB_OTG_GOTGCTL register ********************/
+#define USB_OTG_GOTGCTL_SRQSCS ((uint32_t)0x00000001) /*!< Session request success */
+#define USB_OTG_GOTGCTL_SRQ ((uint32_t)0x00000002) /*!< Session request */
+#define USB_OTG_GOTGCTL_HNGSCS ((uint32_t)0x00000100) /*!< Host negotiation success */
+#define USB_OTG_GOTGCTL_HNPRQ ((uint32_t)0x00000200) /*!< HNP request */
+#define USB_OTG_GOTGCTL_HSHNPEN ((uint32_t)0x00000400) /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_DHNPEN ((uint32_t)0x00000800) /*!< Device HNP enabled */
+#define USB_OTG_GOTGCTL_CIDSTS ((uint32_t)0x00010000) /*!< Connector ID status */
+#define USB_OTG_GOTGCTL_DBCT ((uint32_t)0x00020000) /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD ((uint32_t)0x00040000) /*!< A-session valid */
+#define USB_OTG_GOTGCTL_BSVLD ((uint32_t)0x00080000) /*!< B-session valid */
+
+/******************** Bit definition forUSB_OTG_HCFG register ********************/
+
+#define USB_OTG_HCFG_FSLSPCS ((uint32_t)0x00000003) /*!< FS/LS PHY clock select */
+#define USB_OTG_HCFG_FSLSPCS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS ((uint32_t)0x00000004) /*!< FS- and LS-only support */
+
+/******************** Bit definition forUSB_OTG_DCFG register ********************/
+
+#define USB_OTG_DCFG_DSPD ((uint32_t)0x00000003) /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK ((uint32_t)0x00000004) /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD ((uint32_t)0x000007F0) /*!< Device address */
+#define USB_OTG_DCFG_DAD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4 ((uint32_t)0x00000100) /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5 ((uint32_t)0x00000200) /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6 ((uint32_t)0x00000400) /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL ((uint32_t)0x00001800) /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0 ((uint32_t)0x00000800) /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1 ((uint32_t)0x00001000) /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL ((uint32_t)0x03000000) /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_PCGCR register ********************/
+#define USB_OTG_PCGCR_STPPCLK ((uint32_t)0x00000001) /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK ((uint32_t)0x00000002) /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP ((uint32_t)0x00000010) /*!< PHY suspended */
+
+/******************** Bit definition forUSB_OTG_GOTGINT register ********************/
+#define USB_OTG_GOTGINT_SEDET ((uint32_t)0x00000004) /*!< Session end detected */
+#define USB_OTG_GOTGINT_SRSSCHG ((uint32_t)0x00000100) /*!< Session request success status change */
+#define USB_OTG_GOTGINT_HNSSCHG ((uint32_t)0x00000200) /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET ((uint32_t)0x00020000) /*!< Host negotiation detected */
+#define USB_OTG_GOTGINT_ADTOCHG ((uint32_t)0x00040000) /*!< A-device timeout change */
+#define USB_OTG_GOTGINT_DBCDNE ((uint32_t)0x00080000) /*!< Debounce done */
+
+/******************** Bit definition forUSB_OTG_DCTL register ********************/
+#define USB_OTG_DCTL_RWUSIG ((uint32_t)0x00000001) /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS ((uint32_t)0x00000002) /*!< Soft disconnect */
+#define USB_OTG_DCTL_GINSTS ((uint32_t)0x00000004) /*!< Global IN NAK status */
+#define USB_OTG_DCTL_GONSTS ((uint32_t)0x00000008) /*!< Global OUT NAK status */
+
+#define USB_OTG_DCTL_TCTL ((uint32_t)0x00000070) /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK ((uint32_t)0x00000080) /*!< Set global IN NAK */
+#define USB_OTG_DCTL_CGINAK ((uint32_t)0x00000100) /*!< Clear global IN NAK */
+#define USB_OTG_DCTL_SGONAK ((uint32_t)0x00000200) /*!< Set global OUT NAK */
+#define USB_OTG_DCTL_CGONAK ((uint32_t)0x00000400) /*!< Clear global OUT NAK */
+#define USB_OTG_DCTL_POPRGDNE ((uint32_t)0x00000800) /*!< Power-on programming done */
+
+/******************** Bit definition forUSB_OTG_HFIR register ********************/
+#define USB_OTG_HFIR_FRIVL ((uint32_t)0x0000FFFF) /*!< Frame interval */
+
+/******************** Bit definition forUSB_OTG_HFNUM register ********************/
+#define USB_OTG_HFNUM_FRNUM ((uint32_t)0x0000FFFF) /*!< Frame number */
+#define USB_OTG_HFNUM_FTREM ((uint32_t)0xFFFF0000) /*!< Frame time remaining */
+
+/******************** Bit definition forUSB_OTG_DSTS register ********************/
+#define USB_OTG_DSTS_SUSPSTS ((uint32_t)0x00000001) /*!< Suspend status */
+
+#define USB_OTG_DSTS_ENUMSPD ((uint32_t)0x00000006) /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR ((uint32_t)0x00000008) /*!< Erratic error */
+#define USB_OTG_DSTS_FNSOF ((uint32_t)0x003FFF00) /*!< Frame number of the received SOF */
+
+/******************** Bit definition forUSB_OTG_GAHBCFG register ********************/
+#define USB_OTG_GAHBCFG_GINT ((uint32_t)0x00000001) /*!< Global interrupt mask */
+
+#define USB_OTG_GAHBCFG_HBSTLEN ((uint32_t)0x0000001E) /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2 ((uint32_t)0x00000008) /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3 ((uint32_t)0x00000010) /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN ((uint32_t)0x00000020) /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL ((uint32_t)0x00000080) /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL ((uint32_t)0x00000100) /*!< Periodic TxFIFO empty level */
+
+/******************** Bit definition forUSB_OTG_GUSBCFG register ********************/
+
+#define USB_OTG_GUSBCFG_TOCAL ((uint32_t)0x00000007) /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL ((uint32_t)0x00000040) /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP ((uint32_t)0x00000100) /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP ((uint32_t)0x00000200) /*!< HNP-capable */
+
+#define USB_OTG_GUSBCFG_TRDT ((uint32_t)0x00003C00) /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS ((uint32_t)0x00008000) /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS ((uint32_t)0x00020000) /*!< ULPI FS/LS select */
+#define USB_OTG_GUSBCFG_ULPIAR ((uint32_t)0x00040000) /*!< ULPI Auto-resume */
+#define USB_OTG_GUSBCFG_ULPICSM ((uint32_t)0x00080000) /*!< ULPI Clock SuspendM */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD ((uint32_t)0x00100000) /*!< ULPI External VBUS Drive */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI ((uint32_t)0x00200000) /*!< ULPI external VBUS indicator */
+#define USB_OTG_GUSBCFG_TSDPS ((uint32_t)0x00400000) /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI ((uint32_t)0x00800000) /*!< Indicator complement */
+#define USB_OTG_GUSBCFG_PTCI ((uint32_t)0x01000000) /*!< Indicator pass through */
+#define USB_OTG_GUSBCFG_ULPIIPD ((uint32_t)0x02000000) /*!< ULPI interface protect disable */
+#define USB_OTG_GUSBCFG_FHMOD ((uint32_t)0x20000000) /*!< Forced host mode */
+#define USB_OTG_GUSBCFG_FDMOD ((uint32_t)0x40000000) /*!< Forced peripheral mode */
+#define USB_OTG_GUSBCFG_CTXPKT ((uint32_t)0x80000000) /*!< Corrupt Tx packet */
+
+/******************** Bit definition forUSB_OTG_GRSTCTL register ********************/
+#define USB_OTG_GRSTCTL_CSRST ((uint32_t)0x00000001) /*!< Core soft reset */
+#define USB_OTG_GRSTCTL_HSRST ((uint32_t)0x00000002) /*!< HCLK soft reset */
+#define USB_OTG_GRSTCTL_FCRST ((uint32_t)0x00000004) /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH ((uint32_t)0x00000010) /*!< RxFIFO flush */
+#define USB_OTG_GRSTCTL_TXFFLSH ((uint32_t)0x00000020) /*!< TxFIFO flush */
+
+#define USB_OTG_GRSTCTL_TXFNUM ((uint32_t)0x000007C0) /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3 ((uint32_t)0x00000200) /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4 ((uint32_t)0x00000400) /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ ((uint32_t)0x40000000) /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL ((uint32_t)0x80000000) /*!< AHB master idle */
+
+/******************** Bit definition forUSB_OTG_DIEPMSK register ********************/
+#define USB_OTG_DIEPMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPMSK_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPMSK_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPMSK_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPMSK_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPMSK_TXFURM ((uint32_t)0x00000100) /*!< FIFO underrun mask */
+#define USB_OTG_DIEPMSK_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXSTS register ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL ((uint32_t)0x0000FFFF) /*!< Periodic transmit data FIFO space available */
+
+#define USB_OTG_HPTXSTS_PTXQSAV ((uint32_t)0x00FF0000) /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP ((uint32_t)0xFF000000) /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/******************** Bit definition forUSB_OTG_HAINT register ********************/
+#define USB_OTG_HAINT_HAINT ((uint32_t)0x0000FFFF) /*!< Channel interrupts */
+
+/******************** Bit definition forUSB_OTG_DOEPMSK register ********************/
+#define USB_OTG_DOEPMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPMSK_STUPM ((uint32_t)0x00000008) /*!< SETUP phase done mask */
+#define USB_OTG_DOEPMSK_OTEPDM ((uint32_t)0x00000010) /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_B2BSTUP ((uint32_t)0x00000040) /*!< Back-to-back SETUP packets received mask */
+#define USB_OTG_DOEPMSK_OPEM ((uint32_t)0x00000100) /*!< OUT packet error mask */
+#define USB_OTG_DOEPMSK_BOIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_GINTSTS register ********************/
+#define USB_OTG_GINTSTS_CMOD ((uint32_t)0x00000001) /*!< Current mode of operation */
+#define USB_OTG_GINTSTS_MMIS ((uint32_t)0x00000002) /*!< Mode mismatch interrupt */
+#define USB_OTG_GINTSTS_OTGINT ((uint32_t)0x00000004) /*!< OTG interrupt */
+#define USB_OTG_GINTSTS_SOF ((uint32_t)0x00000008) /*!< Start of frame */
+#define USB_OTG_GINTSTS_RXFLVL ((uint32_t)0x00000010) /*!< RxFIFO nonempty */
+#define USB_OTG_GINTSTS_NPTXFE ((uint32_t)0x00000020) /*!< Nonperiodic TxFIFO empty */
+#define USB_OTG_GINTSTS_GINAKEFF ((uint32_t)0x00000040) /*!< Global IN nonperiodic NAK effective */
+#define USB_OTG_GINTSTS_BOUTNAKEFF ((uint32_t)0x00000080) /*!< Global OUT NAK effective */
+#define USB_OTG_GINTSTS_ESUSP ((uint32_t)0x00000400) /*!< Early suspend */
+#define USB_OTG_GINTSTS_USBSUSP ((uint32_t)0x00000800) /*!< USB suspend */
+#define USB_OTG_GINTSTS_USBRST ((uint32_t)0x00001000) /*!< USB reset */
+#define USB_OTG_GINTSTS_ENUMDNE ((uint32_t)0x00002000) /*!< Enumeration done */
+#define USB_OTG_GINTSTS_ISOODRP ((uint32_t)0x00004000) /*!< Isochronous OUT packet dropped interrupt */
+#define USB_OTG_GINTSTS_EOPF ((uint32_t)0x00008000) /*!< End of periodic frame interrupt */
+#define USB_OTG_GINTSTS_IEPINT ((uint32_t)0x00040000) /*!< IN endpoint interrupt */
+#define USB_OTG_GINTSTS_OEPINT ((uint32_t)0x00080000) /*!< OUT endpoint interrupt */
+#define USB_OTG_GINTSTS_IISOIXFR ((uint32_t)0x00100000) /*!< Incomplete isochronous IN transfer */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT ((uint32_t)0x00200000) /*!< Incomplete periodic transfer */
+#define USB_OTG_GINTSTS_DATAFSUSP ((uint32_t)0x00400000) /*!< Data fetch suspended */
+#define USB_OTG_GINTSTS_HPRTINT ((uint32_t)0x01000000) /*!< Host port interrupt */
+#define USB_OTG_GINTSTS_HCINT ((uint32_t)0x02000000) /*!< Host channels interrupt */
+#define USB_OTG_GINTSTS_PTXFE ((uint32_t)0x04000000) /*!< Periodic TxFIFO empty */
+#define USB_OTG_GINTSTS_CIDSCHG ((uint32_t)0x10000000) /*!< Connector ID status change */
+#define USB_OTG_GINTSTS_DISCINT ((uint32_t)0x20000000) /*!< Disconnect detected interrupt */
+#define USB_OTG_GINTSTS_SRQINT ((uint32_t)0x40000000) /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT ((uint32_t)0x80000000) /*!< Resume/remote wakeup detected interrupt */
+
+/******************** Bit definition forUSB_OTG_GINTMSK register ********************/
+#define USB_OTG_GINTMSK_MMISM ((uint32_t)0x00000002) /*!< Mode mismatch interrupt mask */
+#define USB_OTG_GINTMSK_OTGINT ((uint32_t)0x00000004) /*!< OTG interrupt mask */
+#define USB_OTG_GINTMSK_SOFM ((uint32_t)0x00000008) /*!< Start of frame mask */
+#define USB_OTG_GINTMSK_RXFLVLM ((uint32_t)0x00000010) /*!< Receive FIFO nonempty mask */
+#define USB_OTG_GINTMSK_NPTXFEM ((uint32_t)0x00000020) /*!< Nonperiodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_GINAKEFFM ((uint32_t)0x00000040) /*!< Global nonperiodic IN NAK effective mask */
+#define USB_OTG_GINTMSK_GONAKEFFM ((uint32_t)0x00000080) /*!< Global OUT NAK effective mask */
+#define USB_OTG_GINTMSK_ESUSPM ((uint32_t)0x00000400) /*!< Early suspend mask */
+#define USB_OTG_GINTMSK_USBSUSPM ((uint32_t)0x00000800) /*!< USB suspend mask */
+#define USB_OTG_GINTMSK_USBRST ((uint32_t)0x00001000) /*!< USB reset mask */
+#define USB_OTG_GINTMSK_ENUMDNEM ((uint32_t)0x00002000) /*!< Enumeration done mask */
+#define USB_OTG_GINTMSK_ISOODRPM ((uint32_t)0x00004000) /*!< Isochronous OUT packet dropped interrupt mask */
+#define USB_OTG_GINTMSK_EOPFM ((uint32_t)0x00008000) /*!< End of periodic frame interrupt mask */
+#define USB_OTG_GINTMSK_EPMISM ((uint32_t)0x00020000) /*!< Endpoint mismatch interrupt mask */
+#define USB_OTG_GINTMSK_IEPINT ((uint32_t)0x00040000) /*!< IN endpoints interrupt mask */
+#define USB_OTG_GINTMSK_OEPINT ((uint32_t)0x00080000) /*!< OUT endpoints interrupt mask */
+#define USB_OTG_GINTMSK_IISOIXFRM ((uint32_t)0x00100000) /*!< Incomplete isochronous IN transfer mask */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM ((uint32_t)0x00200000) /*!< Incomplete periodic transfer mask */
+#define USB_OTG_GINTMSK_FSUSPM ((uint32_t)0x00400000) /*!< Data fetch suspended mask */
+#define USB_OTG_GINTMSK_PRTIM ((uint32_t)0x01000000) /*!< Host port interrupt mask */
+#define USB_OTG_GINTMSK_HCIM ((uint32_t)0x02000000) /*!< Host channels interrupt mask */
+#define USB_OTG_GINTMSK_PTXFEM ((uint32_t)0x04000000) /*!< Periodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_CIDSCHGM ((uint32_t)0x10000000) /*!< Connector ID status change mask */
+#define USB_OTG_GINTMSK_DISCINT ((uint32_t)0x20000000) /*!< Disconnect detected interrupt mask */
+#define USB_OTG_GINTMSK_SRQIM ((uint32_t)0x40000000) /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM ((uint32_t)0x80000000) /*!< Resume/remote wakeup detected interrupt mask */
+
+/******************** Bit definition forUSB_OTG_DAINT register ********************/
+#define USB_OTG_DAINT_IEPINT ((uint32_t)0x0000FFFF) /*!< IN endpoint interrupt bits */
+#define USB_OTG_DAINT_OEPINT ((uint32_t)0xFFFF0000) /*!< OUT endpoint interrupt bits */
+
+/******************** Bit definition forUSB_OTG_HAINTMSK register ********************/
+#define USB_OTG_HAINTMSK_HAINTM ((uint32_t)0x0000FFFF) /*!< Channel interrupt mask */
+
+/******************** Bit definition for USB_OTG_GRXSTSP register ********************/
+#define USB_OTG_GRXSTSP_EPNUM ((uint32_t)0x0000000F) /*!< IN EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_BCNT ((uint32_t)0x00007FF0) /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID ((uint32_t)0x00018000) /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS ((uint32_t)0x001E0000) /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DAINTMSK register ********************/
+#define USB_OTG_DAINTMSK_IEPM ((uint32_t)0x0000FFFF) /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM ((uint32_t)0xFFFF0000) /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM ((uint32_t)0x0000000F) /*!< Channel number */
+#define USB_OTG_CHNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_BCNT ((uint32_t)0x00007FF0) /*!< Byte count */
+
+#define USB_OTG_DPID ((uint32_t)0x00018000) /*!< Data PID */
+#define USB_OTG_DPID_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define USB_OTG_DPID_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS ((uint32_t)0x001E0000) /*!< Packet status */
+#define USB_OTG_PKTSTS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+
+#define USB_OTG_EPNUM ((uint32_t)0x0000000F) /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM ((uint32_t)0x01E00000) /*!< Frame number */
+#define USB_OTG_FRMNUM_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM ((uint32_t)0x0000000F) /*!< Channel number */
+#define USB_OTG_CHNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_BCNT ((uint32_t)0x00007FF0) /*!< Byte count */
+
+#define USB_OTG_DPID ((uint32_t)0x00018000) /*!< Data PID */
+#define USB_OTG_DPID_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define USB_OTG_DPID_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS ((uint32_t)0x001E0000) /*!< Packet status */
+#define USB_OTG_PKTSTS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+
+#define USB_OTG_EPNUM ((uint32_t)0x0000000F) /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM ((uint32_t)0x01E00000) /*!< Frame number */
+#define USB_OTG_FRMNUM_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+/******************** Bit definition forUSB_OTG_GRXFSIZ register ********************/
+#define USB_OTG_GRXFSIZ_RXFD ((uint32_t)0x0000FFFF) /*!< RxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSDIS register ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT ((uint32_t)0x0000FFFF) /*!< Device VBUS discharge time */
+
+/******************** Bit definition for OTG register ********************/
+#define USB_OTG_NPTXFSA ((uint32_t)0x0000FFFF) /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD ((uint32_t)0xFFFF0000) /*!< Nonperiodic TxFIFO depth */
+#define USB_OTG_TX0FSA ((uint32_t)0x0000FFFF) /*!< Endpoint 0 transmit RAM start address */
+#define USB_OTG_TX0FD ((uint32_t)0xFFFF0000) /*!< Endpoint 0 TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSPULSE register ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP ((uint32_t)0x00000FFF) /*!< Device VBUS pulsing time */
+
+/******************** Bit definition forUSB_OTG_GNPTXSTS register ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV ((uint32_t)0x0000FFFF) /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV ((uint32_t)0x00FF0000) /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP ((uint32_t)0x7F000000) /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+
+/******************** Bit definition forUSB_OTG_DTHRCTL register ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN ((uint32_t)0x00000001) /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN ((uint32_t)0x00000002) /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN ((uint32_t)0x000007FC) /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2 ((uint32_t)0x00000010) /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3 ((uint32_t)0x00000020) /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4 ((uint32_t)0x00000040) /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5 ((uint32_t)0x00000080) /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6 ((uint32_t)0x00000100) /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7 ((uint32_t)0x00000200) /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8 ((uint32_t)0x00000400) /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN ((uint32_t)0x00010000) /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN ((uint32_t)0x03FE0000) /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7 ((uint32_t)0x01000000) /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8 ((uint32_t)0x02000000) /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN ((uint32_t)0x08000000) /*!< Arbiter parking enable */
+
+/******************** Bit definition forUSB_OTG_DIEPEMPMSK register ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM ((uint32_t)0x0000FFFF) /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DEACHINT register ********************/
+#define USB_OTG_DEACHINT_IEP1INT ((uint32_t)0x00000002) /*!< IN endpoint 1interrupt bit */
+#define USB_OTG_DEACHINT_OEP1INT ((uint32_t)0x00020000) /*!< OUT endpoint 1 interrupt bit */
+
+/******************** Bit definition forUSB_OTG_GCCFG register ********************/
+#define USB_OTG_GCCFG_PWRDWN ((uint32_t)0x00010000) /*!< Power down */
+#define USB_OTG_GCCFG_I2CPADEN ((uint32_t)0x00020000) /*!< Enable I2C bus connection for the external I2C PHY interface */
+#define USB_OTG_GCCFG_VBUSASEN ((uint32_t)0x00040000) /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_VBUSBSEN ((uint32_t)0x00080000) /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_SOFOUTEN ((uint32_t)0x00100000) /*!< SOF output enable */
+#define USB_OTG_GCCFG_NOVBUSSENS ((uint32_t)0x00200000) /*!< VBUS sensing disable option */
+
+/******************** Bit definition forUSB_OTG_DEACHINTMSK register ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM ((uint32_t)0x00000002) /*!< IN Endpoint 1 interrupt mask bit */
+#define USB_OTG_DEACHINTMSK_OEP1INTM ((uint32_t)0x00020000) /*!< OUT Endpoint 1 interrupt mask bit */
+
+/******************** Bit definition forUSB_OTG_CID register ********************/
+#define USB_OTG_CID_PRODUCT_ID ((uint32_t)0xFFFFFFFF) /*!< Product ID field */
+
+/******************** Bit definition forUSB_OTG_DIEPEACHMSK1 register ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPEACHMSK1_TXFURM ((uint32_t)0x00000100) /*!< FIFO underrun mask */
+#define USB_OTG_DIEPEACHMSK1_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_NAKM ((uint32_t)0x00002000) /*!< NAK interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPRT register ********************/
+#define USB_OTG_HPRT_PCSTS ((uint32_t)0x00000001) /*!< Port connect status */
+#define USB_OTG_HPRT_PCDET ((uint32_t)0x00000002) /*!< Port connect detected */
+#define USB_OTG_HPRT_PENA ((uint32_t)0x00000004) /*!< Port enable */
+#define USB_OTG_HPRT_PENCHNG ((uint32_t)0x00000008) /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA ((uint32_t)0x00000010) /*!< Port overcurrent active */
+#define USB_OTG_HPRT_POCCHNG ((uint32_t)0x00000020) /*!< Port overcurrent change */
+#define USB_OTG_HPRT_PRES ((uint32_t)0x00000040) /*!< Port resume */
+#define USB_OTG_HPRT_PSUSP ((uint32_t)0x00000080) /*!< Port suspend */
+#define USB_OTG_HPRT_PRST ((uint32_t)0x00000100) /*!< Port reset */
+
+#define USB_OTG_HPRT_PLSTS ((uint32_t)0x00000C00) /*!< Port line status */
+#define USB_OTG_HPRT_PLSTS_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR ((uint32_t)0x00001000) /*!< Port power */
+
+#define USB_OTG_HPRT_PTCTL ((uint32_t)0x0001E000) /*!< Port test control */
+#define USB_OTG_HPRT_PTCTL_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD ((uint32_t)0x00060000) /*!< Port speed */
+#define USB_OTG_HPRT_PSPD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DOEPEACHMSK1 register ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DOEPEACHMSK1_TXFURM ((uint32_t)0x00000100) /*!< OUT packet error mask */
+#define USB_OTG_DOEPEACHMSK1_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_BERRM ((uint32_t)0x00001000) /*!< Bubble error interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NAKM ((uint32_t)0x00002000) /*!< NAK interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NYETM ((uint32_t)0x00004000) /*!< NYET interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXFSIZ register ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA ((uint32_t)0x0000FFFF) /*!< Host periodic TxFIFO start address */
+#define USB_OTG_HPTXFSIZ_PTXFD ((uint32_t)0xFFFF0000) /*!< Host periodic TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DIEPCTL register ********************/
+#define USB_OTG_DIEPCTL_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */
+#define USB_OTG_DIEPCTL_USBAEP ((uint32_t)0x00008000) /*!< USB active endpoint */
+#define USB_OTG_DIEPCTL_EONUM_DPID ((uint32_t)0x00010000) /*!< Even/odd frame */
+#define USB_OTG_DIEPCTL_NAKSTS ((uint32_t)0x00020000) /*!< NAK status */
+
+#define USB_OTG_DIEPCTL_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_DIEPCTL_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL ((uint32_t)0x00200000) /*!< STALL handshake */
+
+#define USB_OTG_DIEPCTL_TXFNUM ((uint32_t)0x03C00000) /*!< TxFIFO number */
+#define USB_OTG_DIEPCTL_TXFNUM_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2 ((uint32_t)0x01000000) /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3 ((uint32_t)0x02000000) /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK ((uint32_t)0x04000000) /*!< Clear NAK */
+#define USB_OTG_DIEPCTL_SNAK ((uint32_t)0x08000000) /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM ((uint32_t)0x10000000) /*!< Set DATA0 PID */
+#define USB_OTG_DIEPCTL_SODDFRM ((uint32_t)0x20000000) /*!< Set odd frame */
+#define USB_OTG_DIEPCTL_EPDIS ((uint32_t)0x40000000) /*!< Endpoint disable */
+#define USB_OTG_DIEPCTL_EPENA ((uint32_t)0x80000000) /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_HCCHAR register ********************/
+#define USB_OTG_HCCHAR_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM ((uint32_t)0x00007800) /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0 ((uint32_t)0x00000800) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1 ((uint32_t)0x00001000) /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2 ((uint32_t)0x00002000) /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3 ((uint32_t)0x00004000) /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR ((uint32_t)0x00008000) /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV ((uint32_t)0x00020000) /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC ((uint32_t)0x00300000) /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD ((uint32_t)0x1FC00000) /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2 ((uint32_t)0x01000000) /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3 ((uint32_t)0x02000000) /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4 ((uint32_t)0x04000000) /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5 ((uint32_t)0x08000000) /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6 ((uint32_t)0x10000000) /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM ((uint32_t)0x20000000) /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS ((uint32_t)0x40000000) /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA ((uint32_t)0x80000000) /*!< Channel enable */
+
+/******************** Bit definition forUSB_OTG_HCSPLT register ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR ((uint32_t)0x0000007F) /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR ((uint32_t)0x00003F80) /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0 ((uint32_t)0x00000080) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1 ((uint32_t)0x00000100) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2 ((uint32_t)0x00000200) /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3 ((uint32_t)0x00000400) /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4 ((uint32_t)0x00000800) /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5 ((uint32_t)0x00001000) /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6 ((uint32_t)0x00002000) /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS ((uint32_t)0x0000C000) /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT ((uint32_t)0x00010000) /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN ((uint32_t)0x80000000) /*!< Split enable */
+
+/******************** Bit definition forUSB_OTG_HCINT register ********************/
+#define USB_OTG_HCINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH ((uint32_t)0x00000002) /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR ((uint32_t)0x00000004) /*!< AHB error */
+#define USB_OTG_HCINT_STALL ((uint32_t)0x00000008) /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK ((uint32_t)0x00000010) /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK ((uint32_t)0x00000020) /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET ((uint32_t)0x00000040) /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR ((uint32_t)0x00000080) /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR ((uint32_t)0x00000100) /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR ((uint32_t)0x00000200) /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR ((uint32_t)0x00000400) /*!< Data toggle error */
+
+/******************** Bit definition forUSB_OTG_DIEPINT register ********************/
+#define USB_OTG_DIEPINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC ((uint32_t)0x00000008) /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE ((uint32_t)0x00000010) /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE ((uint32_t)0x00000040) /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE ((uint32_t)0x00000080) /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN ((uint32_t)0x00000100) /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA ((uint32_t)0x00000200) /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS ((uint32_t)0x00000800) /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR ((uint32_t)0x00001000) /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK ((uint32_t)0x00002000) /*!< NAK interrupt */
+
+/******************** Bit definition forUSB_OTG_HCINTMSK register ********************/
+#define USB_OTG_HCINTMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM ((uint32_t)0x00000002) /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR ((uint32_t)0x00000004) /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM ((uint32_t)0x00000008) /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM ((uint32_t)0x00000010) /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM ((uint32_t)0x00000020) /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET ((uint32_t)0x00000040) /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM ((uint32_t)0x00000080) /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM ((uint32_t)0x00000100) /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM ((uint32_t)0x00000200) /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM ((uint32_t)0x00000400) /*!< Data toggle error mask */
+
+/******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT ((uint32_t)0x60000000) /*!< Packet count */
+/******************** Bit definition forUSB_OTG_HCTSIZ register ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING ((uint32_t)0x80000000) /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID ((uint32_t)0x60000000) /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0 ((uint32_t)0x20000000) /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1 ((uint32_t)0x40000000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DIEPDMA register ********************/
+#define USB_OTG_DIEPDMA_DMAADDR ((uint32_t)0xFFFFFFFF) /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_HCDMA register ********************/
+#define USB_OTG_HCDMA_DMAADDR ((uint32_t)0xFFFFFFFF) /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_DTXFSTS register ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV ((uint32_t)0x0000FFFF) /*!< IN endpoint TxFIFO space avail */
+
+/******************** Bit definition forUSB_OTG_DIEPTXF register ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA ((uint32_t)0x0000FFFF) /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD ((uint32_t)0xFFFF0000) /*!< IN endpoint TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DOEPCTL register ********************/
+
+#define USB_OTG_DOEPCTL_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */ /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP ((uint32_t)0x00008000) /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS ((uint32_t)0x00020000) /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM ((uint32_t)0x10000000) /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM ((uint32_t)0x20000000) /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM ((uint32_t)0x00100000) /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL ((uint32_t)0x00200000) /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK ((uint32_t)0x04000000) /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK ((uint32_t)0x08000000) /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS ((uint32_t)0x40000000) /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA ((uint32_t)0x80000000) /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_DOEPINT register ********************/
+#define USB_OTG_DOEPINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP ((uint32_t)0x00000008) /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS ((uint32_t)0x00000010) /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_B2BSTUP ((uint32_t)0x00000040) /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET ((uint32_t)0x00004000) /*!< NYET interrupt */
+
+/******************** Bit definition forUSB_OTG_DOEPTSIZ register ********************/
+
+#define USB_OTG_DOEPTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT ((uint32_t)0x60000000) /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0 ((uint32_t)0x20000000) /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1 ((uint32_t)0x40000000) /*!<Bit 1 */
+
+/******************** Bit definition for PCGCCTL register ********************/
+#define USB_OTG_PCGCCTL_STOPCLK ((uint32_t)0x00000001) /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP ((uint32_t)0x00000010) /*!<Bit 1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Stream0) || \
+ ((INSTANCE) == DMA1_Stream1) || \
+ ((INSTANCE) == DMA1_Stream2) || \
+ ((INSTANCE) == DMA1_Stream3) || \
+ ((INSTANCE) == DMA1_Stream4) || \
+ ((INSTANCE) == DMA1_Stream5) || \
+ ((INSTANCE) == DMA1_Stream6) || \
+ ((INSTANCE) == DMA1_Stream7) || \
+ ((INSTANCE) == DMA2_Stream0) || \
+ ((INSTANCE) == DMA2_Stream1) || \
+ ((INSTANCE) == DMA2_Stream2) || \
+ ((INSTANCE) == DMA2_Stream3) || \
+ ((INSTANCE) == DMA2_Stream4) || \
+ ((INSTANCE) == DMA2_Stream5) || \
+ ((INSTANCE) == DMA2_Stream6) || \
+ ((INSTANCE) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOH))
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2) || \
+ ((INSTANCE) == I2C3))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5))
+
+/*************************** I2S Extended Instances ***************************/
+#define IS_I2S_INSTANCE_EXT(PERIPH) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5))
+/*************************** SPI Extended Instances ***************************/
+#define IS_SPI_ALL_INSTANCE_EXT(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) ((INSTANCE) == TIM1)
+
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5))
+
+/***************** TIM Instances : external trigger input availabe ************/
+#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM4) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM5) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM9) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM10) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM11) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F411xE_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,222 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 19-June-2014
+ * @brief CMSIS STM32F4xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F4xx device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+ !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+ !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F411xE)
+ /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+ /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+ /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
+ /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+ /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+ /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+ /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+ STM32F439NI, STM32F429IG and STM32F429II Devices */
+ /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+ STM32F439NI, STM32F439IG and STM32F439II Devices */
+ /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+ /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+#define STM32F411xE /*!< STM32F411CD, STM32F411RD, STM32F411VD, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.1.0
+ */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION ((__STM32F4xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F405xx)
+ #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+ #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+ #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+ #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+ #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+ #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+ #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+ #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+ #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+ #include "stm32f401xe.h"
+#elif defined(STM32F411xE)
+ #include "stm32f411xe.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,194 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_H
+#define __STM32F4xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_conf.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#define __HAL_FREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_FREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_FREEZE_TIM4_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_FREEZE_TIM5_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_FREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_FREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_FREEZE_TIM12_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_FREEZE_TIM13_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_FREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_FREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_FREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_FREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_FREEZE_CAN1_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_FREEZE_CAN2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_FREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_FREEZE_TIM8_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_FREEZE_TIM9_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_FREEZE_TIM10_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_FREEZE_TIM11_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_UNFREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_UNFREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_UNFREEZE_TIM4_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_UNFREEZE_TIM5_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_UNFREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_UNFREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_UNFREEZE_TIM12_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_UNFREEZE_TIM13_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_UNFREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_UNFREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_UNFREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_UNFREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_CAN1_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_UNFREEZE_CAN2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_UNFREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_UNFREEZE_TIM8_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_UNFREEZE_TIM9_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_UNFREEZE_TIM10_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_UNFREEZE_TIM11_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
+
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
+ }while(0);
+
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+
+/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
+ }while(0);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_EnableDBGSleepMode(void);
+void HAL_DisableDBGSleepMode(void);
+void HAL_EnableDBGStopMode(void);
+void HAL_DisableDBGStopMode(void);
+void HAL_EnableDBGStandbyMode(void);
+void HAL_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+void HAL_EnableMemorySwappingBank(void);
+void HAL_DisableMemorySwappingBank(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_adc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,745 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of ADC HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_H
+#define __STM32F4xx_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
+ HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
+ HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */
+ HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
+ HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
+ HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
+ HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */
+ HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */
+ HAL_ADC_STATE_AWD = 0x06 /*!< ADC state analog watchdog */
+
+}HAL_ADC_StateTypeDef;
+
+/**
+ * @brief ADC Init structure definition
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select the frequency of the clock to the ADC. The clock is common for
+ all the ADCs.
+ This parameter can be a value of @ref ADC_ClockPrescaler */
+ uint32_t Resolution; /*!< Configures the ADC resolution dual mode.
+ This parameter can be a value of @ref ADC_Resolution */
+ uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_data_align */
+ uint32_t ScanConvMode; /*!< Specifies whether the conversion is performed in Scan (multi channels) or
+ Single (one channel) mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t EOCSelection; /*!< Specifies whether the EOC flag is set
+ at the end of single channel conversion or at the end of all conversions.
+ This parameter can be a value of @ref ADC_EOCSelection */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in Continuous or Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests is performed in Continuous or in Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for
+ regular channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous or not
+ for regular channels.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of ADC discontinuous conversions that will be done
+ using the sequencer for regular channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConvEdge; /*!< Select the external trigger edge and enable the trigger of a regular group.
+ This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+ uint32_t ExternalTrigConv; /*!< Select the external event used to trigger the start of conversion of a regular group.
+ This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
+}ADC_InitTypeDef;
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
+
+/**
+ * @brief ADC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< The ADC channel to configure.
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t Rank; /*!< The rank in the regular group sequencer.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+ uint32_t SamplingTime; /*!< The sample time value to be set for the selected channel.
+ This parameter can be a value of @ref ADC_sampling_times */
+ uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief ADC Configuration multi-mode structure definition
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode.
+ This parameter can be a value of @ref ADC_analog_watchdog_selection */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a 12-bit value. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a 12-bit value. */
+ uint32_t Channel; /*!< Configures ADC channel for the analog watchdog.
+ This parameter has an effect only if watchdog mode is configured on single channel
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured
+ is interrupt mode or in polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Constants
+ * @{
+ */
+
+
+/** @defgroup ADC_Error_Code
+ * @{
+ */
+
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x01) /*!< OVR error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x02) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_ClockPrescaler
+ * @{
+ */
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ((uint32_t)0x00000000)
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0)
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1)
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE)
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV4) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV6) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_delay_between_2_sampling_phases
+ * @{
+ */
+#define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)0x00000000)
+#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0)
+#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1)
+#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2)
+#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3)
+#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
+#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY)
+
+#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Resolution
+ * @{
+ */
+#define ADC_RESOLUTION12b ((uint32_t)0x00000000)
+#define ADC_RESOLUTION10b ((uint32_t)ADC_CR1_RES_0)
+#define ADC_RESOLUTION8b ((uint32_t)ADC_CR1_RES_1)
+#define ADC_RESOLUTION6b ((uint32_t)ADC_CR1_RES)
+
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION12b) || \
+ ((RESOLUTION) == ADC_RESOLUTION10b) || \
+ ((RESOLUTION) == ADC_RESOLUTION8b) || \
+ ((RESOLUTION) == ADC_RESOLUTION6b))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_edge_Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN)
+
+#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_Source_Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0)
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1)
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2)
+#define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3)
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
+#define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL)
+
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_data_align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels
+ * @{
+ */
+#define ADC_CHANNEL_0 ((uint32_t)0x00000000)
+#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1)
+#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2)
+#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3)
+#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
+#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4)
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
+
+#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16)
+#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17)
+#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_16) || \
+ ((CHANNEL) == ADC_CHANNEL_17) || \
+ ((CHANNEL) == ADC_CHANNEL_18))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times
+ * @{
+ */
+#define ADC_SAMPLETIME_3CYCLES ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0)
+#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1)
+#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2)
+#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
+#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10)
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_15CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_56CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_84CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_112CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_144CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_480CYCLES))
+/**
+ * @}
+ */
+
+ /** @defgroup ADC_EOCSelection
+ * @{
+ */
+#define EOC_SEQ_CONV ((uint32_t)0x00000000)
+#define EOC_SINGLE_CONV ((uint32_t)0x00000001)
+#define EOC_SINGLE_SEQ_CONV ((uint32_t)0x00000002) /*!< reserved for future use */
+
+#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == EOC_SINGLE_CONV) || \
+ ((EOCSelection) == EOC_SEQ_CONV) || \
+ ((EOCSelection) == EOC_SINGLE_SEQ_CONV))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Event_type
+ * @{
+ */
+#define AWD_EVENT ((uint32_t)ADC_FLAG_AWD)
+#define OVR_EVENT ((uint32_t)ADC_FLAG_OVR)
+
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == AWD_EVENT) || \
+ ((EVENT) == OVR_EVENT))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_selection
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000)
+
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition
+ * @{
+ */
+#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE)
+#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE)
+#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE)
+#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE)
+
+#define IS_ADC_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
+ ((IT) == ADC_IT_JEOC)|| ((IT) == ADC_IT_OVR))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition
+ * @{
+ */
+#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD)
+#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC)
+#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC)
+#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT)
+#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT)
+#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels_type
+ * @{
+ */
+#define ALL_CHANNELS ((uint32_t)0x00000001)
+#define REGULAR_CHANNELS ((uint32_t)0x00000002) /*!< reserved for future use */
+#define INJECTED_CHANNELS ((uint32_t)0x00000003) /*!< reserved for future use */
+
+#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ALL_CHANNELS) || \
+ ((CHANNEL_TYPE) == REGULAR_CHANNELS) || \
+ ((CHANNEL_TYPE) == INJECTED_CHANNELS))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_thresholds
+ * @{
+ */
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= ((uint32_t)0xFFF))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_length
+ * @{
+ */
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank
+ * @{
+ */
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number
+ * @{
+ */
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_range_verification
+ * @{
+ */
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION12b) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION10b) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION8b) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION6b) && ((ADC_VALUE) <= ((uint32_t)0x003F))))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/**
+ * @brief Enable the ADC peripheral.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON)
+
+/**
+ * @brief Disable the ADC peripheral.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON)
+
+/**
+ * @brief Set ADC Regular channel sequence length.
+ * @param _NbrOfConversion_: Regular channel sequence length.
+ * @retval None
+ */
+#define __HAL_ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20)
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 10)))
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (_CHANNELNB_)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 1 and 6.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 1)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 7 and 12.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 7)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 13 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 13)))
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1)
+
+/**
+ * @brief Configures the number of discontinuous conversions for the regular group channels.
+ * @param _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define __HAL_ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1) << 13)
+
+/**
+ * @brief Enable ADC scan mode.
+ * @param _SCANCONV_MODE_: Scan conversion mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8)
+
+/**
+ * @brief Enable the ADC end of conversion selection.
+ * @param _EOCSelection_MODE_: End of conversion selection mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10)
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMAContReq_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9)
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: ADC Interrupt.
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: ADC interrupt.
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
+
+/** @brief Check if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: specifies the ADC interrupt source to check.
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Clear the ADC's pending flags.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __FLAG__: ADC flag.
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __FLAG__: ADC flag.
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Return resolution bits in CR1 register.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
+
+/* Include ADC HAL Extension module */
+#include "stm32f4xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+
+/* Peripheral State functions ***************************************************/
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_adc_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,288 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of ADC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_EX_H
+#define __STM32F4xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief ADC Configuration injected Channel structure definition
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Configure the ADC injected channel.
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t InjectedRank; /*!< The rank in the injected group sequencer
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4. */
+ uint32_t InjectedSamplingTime; /*!< The sample time value to be set for the selected channel.
+ This parameter can be a value of @ref ADC_sampling_times */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data when convert injected channels.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for
+ injected channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group
+ conversion after regular one */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous mode or not for injected channels.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t ExternalTrigInjecConvEdge; /*!< Select the external trigger edge and enable the trigger of an injected channels.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected */
+ uint32_t ExternalTrigInjecConv; /*!< Select the external event used to trigger the start of conversion of a injected channels.
+ This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected */
+}ADC_InjectionConfTypeDef;
+
+/**
+ * @brief ADC Configuration multi-mode structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
+ This parameter can be a value of @ref ADCEx_Common_mode */
+ uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode.
+ This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
+ uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
+ This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
+}ADC_MultiModeTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Constants
+ * @{
+ */
+
+
+/** @defgroup ADCEx_Common_mode
+ * @{
+ */
+#define ADC_MODE_INDEPENDENT ((uint32_t)0x00000000)
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0)
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1)
+#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT) || \
+ ((MODE) == ADC_DUALMODE_INTERL) || \
+ ((MODE) == ADC_DUALMODE_ALTERTRIG) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \
+ ((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_INTERL) || \
+ ((MODE) == ADC_TRIPLEMODE_ALTERTRIG))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode
+ * @{
+ */
+#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000) /*!< DMA mode disabled */
+#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
+#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
+#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
+
+#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
+ ((MODE) == ADC_DMAACCESSMODE_1) || \
+ ((MODE) == ADC_DMAACCESSMODE_2) || \
+ ((MODE) == ADC_DMAACCESSMODE_3))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
+
+#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_Source_Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3)
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL)
+
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_channel_selection
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_length
+ * @{
+ */
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_rank
+ * @{
+ */
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)4)))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Set the selected injected Channel rank.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define __HAL_ADC_JSQR(_CHANNELNB_, _RANKNB_,_JSQR_JL_) \
+((_CHANNELNB_) << (5 * (uint8_t)(((_RANKNB_) + 3) - (_JSQR_JL_))))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_can.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,781 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_can.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CAN_H
+#define __STM32F4xx_HAL_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+ uint32_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+ uint32_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO uint32_t ErrorCode; /*!< CAN Error code */
+
+}CAN_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HAL CAN Error Code
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE 0x00 /*!< No error */
+#define HAL_CAN_ERROR_EWG 0x01 /*!< EWG error */
+#define HAL_CAN_ERROR_EPV 0x02 /*!< EPV error */
+#define HAL_CAN_ERROR_BOF 0x04 /*!< BOF error */
+#define HAL_CAN_ERROR_STF 0x08 /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR 0x10 /*!< Form error */
+#define HAL_CAN_ERROR_ACK 0x20 /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR 0x40 /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD 0x80 /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC 0x100 /*!< LEC transfer error */
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS ((uint8_t)0x01) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode
+ * @{
+ */
+#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_synchronisation_jump_width
+ * @{
+ */
+#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1
+ * @{
+ */
+#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2
+ * @{
+ */
+#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler
+ * @{
+ */
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number
+ * @{
+ */
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+
+/* Legacy defines */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Start_bank_filter_for_slave_CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx
+ * @{
+ */
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type
+ * @{
+ */
+#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request
+ * @{
+ */
+#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants
+ * @{
+ */
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00) /*!< CAN transmission failed */
+#define CAN_TXSTATUS_OK ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 ((uint32_t)0x0000051A) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 ((uint32_t)0x0000051B) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 ((uint32_t)0x0000051C) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 ((uint32_t)0x00000203) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x00000204) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 ((uint32_t)0x00000403) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x00000404) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */
+#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */
+#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_BOF) || \
+ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_SLAK) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0))
+
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_SLAK) || ((FLAG) == CAN_FLAG_RQCP2) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
+ ((FLAG) == CAN_FLAG_WKU))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+
+#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
+ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
+ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
+ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+/**
+ * @}
+ */
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x0000FFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF)
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__: CAN handle
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__: CAN Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__: CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? (((__HANDLE__)->Instance->TSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? (((__HANDLE__)->Instance->RF0R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? (((__HANDLE__)->Instance->RF1R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? (((__HANDLE__)->Instance->MSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__HANDLE__)->Instance->ESR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__: CAN Handle
+ * @param __INTERRUPT__: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__: CAN Handle
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+
+
+/**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__: CAN handle
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__: CAN Handle
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval None
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disable the DBG Freeze for CAN.
+ * @param __HANDLE__: CAN Handle
+ * @param __NEWSTATE__: new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+
+/* Peripheral State functions ***************************************************/
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_conf.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,407 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32f4xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)500) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 1
+#define DATA_CACHE_ENABLE 1
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2
+#define MAC_ADDR1 0
+#define MAC_ADDR2 0
+#define MAC_ADDR3 0
+#define MAC_ADDR4 0
+#define MAC_ADDR5 0
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_cortex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,163 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cortex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CORTEX_H
+#define __STM32F4xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Preemption_Priority_Group
+ * @{
+ */
+
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/** @brief Configures the SysTick clock source.
+ * @param __CLKSRC__: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__) \
+ do { \
+ if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK) \
+ { \
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; \
+ } \
+ else \
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; \
+ } while(0)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions *******************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+
+/* Peripheral Control functions *************************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_crc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,145 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_crc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRC_H
+#define __STM32F4xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief CRC HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */
+
+}HAL_CRC_StateTypeDef;
+
+/**
+ * @brief CRC handle Structure definition
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< CRC locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+}CRC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset CRC handle state
+ * @param __HANDLE__: CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Resets CRC Data Register.
+ * @param __HANDLE__: CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Stores a 8-bit data in the Independent Data(ID) register.
+ * @param __HANDLE__: CRC handle
+ * @param __VALUE: 8-bit value to be stored in the ID register
+ * @retval None
+ */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (MODIFY_REG((__HANDLE__)->Instance->IDR, CRC_IDR_IDR, (__VALUE__))
+
+/**
+ * @brief Returns the 8-bit data stored in the Independent Data(ID) register.
+ * @param __HANDLE__: CRC handle
+ * @retval 8-bit value of the ID register
+ */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+
+/* Peripheral Control functions ************************************************/
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+
+/* Peripheral State functions **************************************************/
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_cryp.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,403 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CRYP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_H
+#define __STM32F4xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief CRYP Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref CRYP_Data_Type */
+
+ uint32_t KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit key length.
+ This parameter can be a value of @ref CRYP_Key_Size */
+
+ uint8_t* pKey; /*!< The key used for encryption/decryption */
+
+ uint8_t* pInitVect; /*!< The initialization vector used also as initialization
+ counter in CTR mode */
+
+ uint8_t IVSize; /*!< The size of initialization vector.
+ This parameter (called nonce size in CCM) is used only
+ in AES-128/192/256 encryption/decryption CCM mode */
+
+ uint8_t TagSize; /*!< The size of returned authentication TAG.
+ This parameter is used only in AES-128/192/256
+ encryption/decryption CCM mode */
+
+ uint8_t* Header; /*!< The header used in GCM and CCM modes */
+
+ uint16_t HeaderSize; /*!< The size of header buffer in bytes */
+
+ uint8_t* pScratch; /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.
+ This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */
+}CRYP_InitTypeDef;
+
+/**
+ * @brief HAL CRYP State structures definition
+ */
+typedef enum
+{
+ HAL_CRYP_STATE_RESET = 0x00, /*!< CRYP not yet initialized or disabled */
+ HAL_CRYP_STATE_READY = 0x01, /*!< CRYP initialized and ready for use */
+ HAL_CRYP_STATE_BUSY = 0x02, /*!< CRYP internal processing is ongoing */
+ HAL_CRYP_STATE_TIMEOUT = 0x03, /*!< CRYP timeout state */
+ HAL_CRYP_STATE_ERROR = 0x04 /*!< CRYP error state */
+}HAL_CRYP_STATETypeDef;
+
+/**
+ * @brief HAL CRYP phase structures definition
+ */
+typedef enum
+{
+ HAL_CRYP_PHASE_READY = 0x01, /*!< CRYP peripheral is ready for initialization. */
+ HAL_CRYP_PHASE_PROCESS = 0x02, /*!< CRYP peripheral is in processing phase */
+ HAL_CRYP_PHASE_FINAL = 0x03 /*!< CRYP peripheral is in final phase
+ This is relevant only with CCM and GCM modes */
+}HAL_PhaseTypeDef;
+
+/**
+ * @brief CRYP handle Structure definition
+ */
+typedef struct
+{
+ CRYP_InitTypeDef Init; /*!< CRYP required parameters */
+
+ uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+ uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+ __IO uint16_t CrypInCount; /*!< Counter of inputed data */
+
+ __IO uint16_t CrypOutCount; /*!< Counter of outputed data */
+
+ HAL_StatusTypeDef Status; /*!< CRYP peripheral status */
+
+ HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRYP locking object */
+
+ __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
+}CRYP_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CRYP_Key_Size
+ * @{
+ */
+#define CRYP_KEYSIZE_128B ((uint32_t)0x00000000)
+#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0
+#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1
+
+#define IS_CRYP_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KEYSIZE_128B) || \
+ ((KEYSIZE) == CRYP_KEYSIZE_192B) || \
+ ((KEYSIZE) == CRYP_KEYSIZE_256B))
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Data_Type
+ * @{
+ */
+#define CRYP_DATATYPE_32B ((uint32_t)0x00000000)
+#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE
+
+#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DATATYPE_32B) || \
+ ((DATATYPE) == CRYP_DATATYPE_16B) || \
+ ((DATATYPE) == CRYP_DATATYPE_8B) || \
+ ((DATATYPE) == CRYP_DATATYPE_1B))
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_AlgoModeDirection
+ * @{
+ */
+#define CRYP_CR_ALGOMODE_DIRECTION ((uint32_t)0x0008003C)
+#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT ((uint32_t)0x00000004)
+#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT ((uint32_t)0x0000000C)
+#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT ((uint32_t)0x00000014)
+#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT ((uint32_t)0x00000018)
+#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT ((uint32_t)0x0000001C)
+#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT ((uint32_t)0x00000024)
+#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT ((uint32_t)0x00000028)
+#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT ((uint32_t)0x0000002C)
+#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT ((uint32_t)0x00000030)
+#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT ((uint32_t)0x00000034)
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Interrupt
+ * @{
+ */
+#define CRYP_IT_INI ((uint32_t)CRYP_IMSCR_INIM) /*!< Input FIFO Interrupt */
+#define CRYP_IT_OUTI ((uint32_t)CRYP_IMSCR_OUTIM) /*!< Output FIFO Interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Flags
+ * @{
+ */
+
+#define CRYP_FLAG_BUSY ((uint32_t)0x00000010) /*!< The CRYP core is currently
+ processing a block of data
+ or a key preparation (for
+ AES decryption). */
+#define CRYP_FLAG_IFEM ((uint32_t)0x00000001) /*!< Input FIFO is empty */
+#define CRYP_FLAG_IFNF ((uint32_t)0x00000002) /*!< Input FIFO is not Full */
+#define CRYP_FLAG_OFNE ((uint32_t)0x00000004) /*!< Output FIFO is not empty */
+#define CRYP_FLAG_OFFU ((uint32_t)0x00000008) /*!< Output FIFO is Full */
+#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002) /*!< Output FIFO service raw
+ interrupt status */
+#define CRYP_FLAG_INRIS ((uint32_t)0x01000001) /*!< Input FIFO service raw
+ interrupt status */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset CRYP handle state
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+ * @brief Enable/Disable the CRYP peripheral.
+ * @param None
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE() (CRYP->CR |= CRYP_CR_CRYPEN)
+#define __HAL_CRYP_DISABLE() (CRYP->CR &= ~CRYP_CR_CRYPEN)
+
+/**
+ * @brief Flush the data FIFO.
+ * @param None
+ * @retval None
+ */
+#define __HAL_CRYP_FIFO_FLUSH() (CRYP->CR |= CRYP_CR_FFLUSH)
+
+/**
+ * @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.
+ * @param MODE: The algorithm mode.
+ * @retval None
+ */
+#define __HAL_CRYP_SET_MODE(MODE) CRYP->CR |= (uint32_t)(MODE)
+
+/** @brief Check whether the specified CRYP flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
+ * or a key preparation (for AES decryption).
+ * @arg CRYP_FLAG_IFEM: Input FIFO is empty
+ * @arg CRYP_FLAG_IFNF: Input FIFO is not full
+ * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
+ * @arg CRYP_FLAG_OFNE: Output FIFO is not empty
+ * @arg CRYP_FLAG_OFFU: Output FIFO is full
+ * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define CRYP_FLAG_MASK ((uint32_t)0x0000001F)
+#define __HAL_CRYP_GET_FLAG(__FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01)?(((CRYP->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
+ (((CRYP->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
+
+/** @brief Check whether the specified CRYP interrupt is set or not.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
+ * @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_CRYP_GET_IT(__INTERRUPT__) ((CRYP->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Enable the CRYP interrupt.
+ * @param __INTERRUPT__: CRYP Interrupt.
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE_IT(__INTERRUPT__) ((CRYP->IMSCR) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the CRYP interrupt.
+ * @param __INTERRUPT__: CRYP interrupt.
+ * @retval None
+ */
+#define __HAL_CRYP_DISABLE_IT(__INTERRUPT__) ((CRYP->IMSCR) &= ~(__INTERRUPT__))
+
+/* Include CRYP HAL Extension module */
+#include "stm32f4xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+
+/* DES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using polling **********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* TDES encryption/decryption using interrupt ********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using DMA **************************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* Processing functions ******************************************************/
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/* Peripheral State functions ************************************************/
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+
+/* MSP functions *************************************************************/
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+
+/* CallBack functions ********************************************************/
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_cryp_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,146 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CRYP HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_EX_H
+#define __STM32F4xx_HAL_CRYP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYPEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYPEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CRYPEx_AlgoModeDirection
+ * @{
+ */
+#define CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT ((uint32_t)0x00080000)
+#define CRYP_CR_ALGOMODE_AES_GCM_DECRYPT ((uint32_t)0x00080004)
+#define CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT ((uint32_t)0x00080008)
+#define CRYP_CR_ALGOMODE_AES_CCM_DECRYPT ((uint32_t)0x0008000C)
+/**
+ * @}
+ */
+
+/** @defgroup CRYPEx_PhaseConfig
+ * The phases are relevant only to AES-GCM and AES-CCM
+ * @{
+ */
+#define CRYP_PHASE_INIT ((uint32_t)0x00000000)
+#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0
+#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1
+#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Set the phase: Init, header, payload, final.
+ * This is relevant only for GCM and CCM modes.
+ * @param PHASE: The phase.
+ * @retval None
+ */
+#define __HAL_CRYP_SET_PHASE(PHASE) do{CRYP->CR &= (uint32_t)(~CRYP_CR_GCM_CCMPH);\
+ CRYP->CR |= (uint32_t)(PHASE);\
+ }while(0)
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint16_t Size, uint8_t *AuthTag, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+
+/* Processing functions ********************************************************/
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+#endif /* STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_dac.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,331 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_H
+#define __STM32F4xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */
+}HAL_DAC_StateTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+}DAC_HandleTypeDef;
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+}DAC_ChannelConfTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DAC_Error_Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DAM underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DAM underrun error */
+#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_trigger_selection
+ * @{
+ */
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T8_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection
+ * @{
+ */
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000)
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010)
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignement
+ * @{
+ */
+#define DAC_ALIGN_12B_R ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R ((uint32_t)0x00000008)
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data
+ * @{
+ */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR1) || \
+ ((FLAG) == DAC_FLAG_DMAUDR2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_IT_definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR1) || \
+ ((IT) == DAC_IT_DMAUDR2))
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/** @brief Enable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __DAC_Channel__: specifies the DAC channel
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Disable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __DAC_Channel__: specifies the DAC channel.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Set DHR12R1 alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12R1_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000008) + (__ALIGNEMENT__))
+
+/** @brief Set DHR12R2 alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12R2_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000014) + (__ALIGNEMENT__))
+
+/** @brief Set DHR12RD alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12RD_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000020) + (__ALIGNEMENT__))
+
+/** @brief Enable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief Get the selected DAC's flag status.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the DAC's flag.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/* Include DAC HAL Extension module */
+#include "stm32f4xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+
+/* Peripheral State functions *************************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_dac_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,183 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DAC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_EX_H
+#define __STM32F4xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DACEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DACEx_wave_generation
+ * @{
+ */
+#define DAC_WAVEGENERATION_NONE ((uint32_t)0x00000000)
+#define DAC_WAVEGENERATION_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVEGENERATION_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WAVEGENERATION_NONE) || \
+ ((WAVE) == DAC_WAVEGENERATION_NOISE) || \
+ ((WAVE) == DAC_WAVEGENERATION_TRIANGLE))
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_wave_generation
+ * @{
+ */
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NOISE) || \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Extension features functions ***********************************************/
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_dcmi.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,498 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DCMI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_H
+#define __STM32F4xx_HAL_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DCMI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief DCMI Error source
+ */
+typedef enum
+{
+ DCMI_ERROR_SYNC = 1, /*!< Synchronisation error */
+ DCMI_OVERRUN = 2, /*!< DCMI Overrun */
+}DCMI_ErrorTypeDef;
+
+/**
+ * @brief DCMI Embedded Synchronisation CODE Init structure definition
+ */
+typedef struct
+{
+ uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+ uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */
+ uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */
+ uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
+}DCMI_CodesInitTypeDef;
+
+/**
+ * @brief DCMI Init structure definition
+ */
+typedef struct
+{
+ uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+ This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+ uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
+ This parameter can be a value of @ref DCMI_PIXCK_Polarity */
+
+ uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_VSYNC_Polarity */
+
+ uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_HSYNC_Polarity */
+
+ uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+ This parameter can be a value of @ref DCMI_Capture_Rate */
+
+ uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+ This parameter can be a value of @ref DCMI_Extended_Data_Mode */
+
+ DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */
+
+ uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode.
+ This parameter can be a value of @ref DCMI_MODE_JPEG */
+
+}DCMI_InitTypeDef;
+
+/**
+ * @brief HAL DCMI State structures definition
+ */
+typedef enum
+{
+ HAL_DCMI_STATE_RESET = 0x00, /*!< DCMI not yet initialized or disabled */
+ HAL_DCMI_STATE_READY = 0x01, /*!< DCMI initialized and ready for use */
+ HAL_DCMI_STATE_BUSY = 0x02, /*!< DCMI internal processing is ongoing */
+ HAL_DCMI_STATE_TIMEOUT = 0x03, /*!< DCMI timeout state */
+ HAL_DCMI_STATE_ERROR = 0x04 /*!< DCMI error state */
+}HAL_DCMI_StateTypeDef;
+
+/**
+ * @brief DCMI handle Structure definition
+ */
+typedef struct
+{
+ DCMI_TypeDef *Instance; /*!< DCMI Register base address */
+
+ DCMI_InitTypeDef Init; /*!< DCMI parameters */
+
+ HAL_LockTypeDef Lock; /*!< DCMI locking object */
+
+ __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */
+
+ __IO uint32_t XferCount; /*!< DMA transfer counter */
+
+ __IO uint32_t XferSize; /*!< DMA transfer size */
+
+ uint32_t XferTransferNumber; /*!< DMA transfer number */
+
+ uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */
+
+ __IO uint32_t ErrorCode; /*!< DCMI Error code */
+
+}DCMI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DCMI_Error_Code
+ * @{
+ */
+#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DCMI_ERROR_OVF ((uint32_t)0x00000001) /*!< Overflow error */
+#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */
+#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Mode
+ * @{
+ */
+#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously
+ into the destination memory through the DMA */
+#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of
+ frame and then transfers a single frame through the DMA */
+
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
+ ((MODE) == DCMI_MODE_SNAPSHOT))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Synchronization_Mode
+ * @{
+ */
+#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000) /*!< Hardware synchronization data capture (frame/line start/stop)
+ is synchronized with the HSYNC/VSYNC signals */
+#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with
+ synchronization codes embedded in the data flow */
+
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
+ ((MODE) == DCMI_SYNCHRO_EMBEDDED))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_PIXCK_Polarity
+ * @{
+ */
+#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */
+
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
+ ((POLARITY) == DCMI_PCKPOLARITY_RISING))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_VSYNC_Polarity
+ * @{
+ */
+#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */
+#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */
+
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_VSPOLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_HSYNC_Polarity
+ * @{
+ */
+#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */
+#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */
+
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_HSPOLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_MODE_JPEG
+ * @{
+ */
+#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< Mode JPEG Disabled */
+#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */
+
+#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
+ ((JPEG_MODE) == DCMI_JPEG_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Rate
+ * @{
+ */
+#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */
+#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */
+#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */
+
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Extended_Data_Mode
+ * @{
+ */
+#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */
+
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \
+ ((DATA) == DCMI_EXTEND_DATA_10B) || \
+ ((DATA) == DCMI_EXTEND_DATA_12B) || \
+ ((DATA) == DCMI_EXTEND_DATA_14B))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Coordinate
+ * @{
+ */
+#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */
+
+#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Height
+ * @{
+ */
+#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFF) /*!< Window Height */
+
+#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_interrupt_sources
+ * @{
+ */
+#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE)
+#define DCMI_IT_OVF ((uint32_t)DCMI_IER_OVF_IE)
+#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE)
+#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE)
+#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE)
+
+#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000))
+
+#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \
+ ((IT) == DCMI_IT_OVF) || \
+ ((IT) == DCMI_IT_ERR) || \
+ ((IT) == DCMI_IT_VSYNC) || \
+ ((IT) == DCMI_IT_LINE))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Flags
+ * @{
+ */
+
+/**
+ * @brief DCMI SR register
+ */
+#define DCMI_FLAG_HSYNC ((uint32_t)0x2001)
+#define DCMI_FLAG_VSYNC ((uint32_t)0x2002)
+#define DCMI_FLAG_FNE ((uint32_t)0x2004)
+/**
+ * @brief DCMI RISR register
+ */
+#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS)
+#define DCMI_FLAG_OVFRI ((uint32_t)DCMI_RISR_OVF_RIS)
+#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS)
+#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS)
+#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS)
+/**
+ * @brief DCMI MISR register
+ */
+#define DCMI_FLAG_FRAMEMI ((uint32_t)0x1001)
+#define DCMI_FLAG_OVFMI ((uint32_t)0x1002)
+#define DCMI_FLAG_ERRMI ((uint32_t)0x1004)
+#define DCMI_FLAG_VSYNCMI ((uint32_t)0x1008)
+#define DCMI_FLAG_LINEMI ((uint32_t)0x1010)
+#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \
+ ((FLAG) == DCMI_FLAG_VSYNC) || \
+ ((FLAG) == DCMI_FLAG_FNE) || \
+ ((FLAG) == DCMI_FLAG_FRAMERI) || \
+ ((FLAG) == DCMI_FLAG_OVFRI) || \
+ ((FLAG) == DCMI_FLAG_ERRRI) || \
+ ((FLAG) == DCMI_FLAG_VSYNCRI) || \
+ ((FLAG) == DCMI_FLAG_LINERI) || \
+ ((FLAG) == DCMI_FLAG_FRAMEMI) || \
+ ((FLAG) == DCMI_FLAG_OVFMI) || \
+ ((FLAG) == DCMI_FLAG_ERRMI) || \
+ ((FLAG) == DCMI_FLAG_VSYNCMI) || \
+ ((FLAG) == DCMI_FLAG_LINEMI))
+
+#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DCMI handle state
+ * @param __HANDLE__: specifies the DCMI handle.
+ * @retval None
+ */
+#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET)
+
+/**
+ * @brief Enable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
+
+/**
+ * @brief Disable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVFRI: Overflow flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval The state of FLAG.
+ */
+#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
+((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\
+ (((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVFRI: Overflow flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval None
+ */
+#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified DCMI interrupt has occurred or not.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
+void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
+HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi);
+
+/* Peripheral State functions *************************************************/
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_def.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,198 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_def.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DEF
+#define __STM32F4xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00,
+ HAL_ERROR = 0x01,
+ HAL_BUSY = 0x02,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#ifndef NULL
+ #define NULL (void *) 0
+#endif
+
+#define HAL_MAX_DELAY 0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+ (__DMA_HANDLE__).Parent = (__HANDLE__); \
+ } while(0)
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__: specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+ /* Reserved for future use */
+ #error USE_RTOS should be 0 in the current HAL release
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+ * @brief __RAM_FUNC definition
+ */
+#if defined ( __CC_ARM )
+/* ARM Compiler
+ ------------
+ RAM functions are defined using the toolchain options.
+ Functions that are executed in RAM should reside in a separate source module.
+ Using the 'Options for File' dialog you can simply change the 'Code / Const'
+ area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+ dialog.
+*/
+#define __RAM_FUNC HAL_StatusTypeDef
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+ RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
+
+#elif defined ( __GNUC__ )
+/* GNU Compiler
+ ------------
+ RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc")))
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F4xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_dma.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,697 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_H
+#define __STM32F4xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel used for the specified stream.
+ This parameter can be a value of @ref DMA_Channel_selection */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Stream */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+ uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+ This parameter can be a value of @ref DMA_FIFO_direct_mode
+ @note The Direct mode (FIFO mode disabled) cannot be used if the
+ memory-to-memory data transfer is configured on the selected stream */
+
+ uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
+ This parameter can be a value of @ref DMA_FIFO_threshold_level */
+
+ uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
+ It specifies the amount of data to be transferred in a single non interruptable
+ transaction.
+ This parameter can be a value of @ref DMA_Memory_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+
+ uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+ It specifies the amount of data to be transferred in a single non interruptable
+ transaction.
+ This parameter can be a value of @ref DMA_Peripheral_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+}DMA_InitTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_READY_MEM0 = 0x11, /*!< DMA Mem0 process success */
+ HAL_DMA_STATE_READY_MEM1 = 0x21, /*!< DMA Mem1 process success */
+ HAL_DMA_STATE_READY_HALF_MEM0 = 0x31, /*!< DMA Mem0 Half process success */
+ HAL_DMA_STATE_READY_HALF_MEM1 = 0x41, /*!< DMA Mem1 Half process success */
+ HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_BUSY_MEM0 = 0x12, /*!< DMA Mem0 process is ongoing */
+ HAL_DMA_STATE_BUSY_MEM1 = 0x22, /*!< DMA Mem1 process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Stream_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+}DMA_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA_ERROR_FE ((uint32_t)0x00000002) /*!< FIFO error */
+#define HAL_DMA_ERROR_DME ((uint32_t)0x00000004) /*!< Direct Mode error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Channel_selection
+ * @{
+ */
+#define DMA_CHANNEL_0 ((uint32_t)0x00000000) /*!< DMA Channel 0 */
+#define DMA_CHANNEL_1 ((uint32_t)0x02000000) /*!< DMA Channel 1 */
+#define DMA_CHANNEL_2 ((uint32_t)0x04000000) /*!< DMA Channel 2 */
+#define DMA_CHANNEL_3 ((uint32_t)0x06000000) /*!< DMA Channel 3 */
+#define DMA_CHANNEL_4 ((uint32_t)0x08000000) /*!< DMA Channel 4 */
+#define DMA_CHANNEL_5 ((uint32_t)0x0A000000) /*!< DMA Channel 5 */
+#define DMA_CHANNEL_6 ((uint32_t)0x0C000000) /*!< DMA Channel 6 */
+#define DMA_CHANNEL_7 ((uint32_t)0x0E000000) /*!< DMA Channel 7 */
+
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+ ((CHANNEL) == DMA_CHANNEL_1) || \
+ ((CHANNEL) == DMA_CHANNEL_2) || \
+ ((CHANNEL) == DMA_CHANNEL_3) || \
+ ((CHANNEL) == DMA_CHANNEL_4) || \
+ ((CHANNEL) == DMA_CHANNEL_5) || \
+ ((CHANNEL) == DMA_CHANNEL_6) || \
+ ((CHANNEL) == DMA_CHANNEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_buffer_size
+ * @{
+ */
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode disable */
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode disable */
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment: Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Memory_data_size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment: Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */
+#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR) || \
+ ((MODE) == DMA_PFCTRL))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level: Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_direct_mode
+ * @{
+ */
+#define DMA_FIFOMODE_DISABLE ((uint32_t)0x00000000) /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+ ((STATE) == DMA_FIFOMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_threshold_level
+ * @{
+ */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL ((uint32_t)0x00000000) /*!< FIFO threshold 1 quart full configuration */
+#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_burst
+ * @{
+ */
+#define DMA_MBURST_SINGLE ((uint32_t)0x00000000)
+#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0)
+#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1)
+#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST)
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+ ((BURST) == DMA_MBURST_INC4) || \
+ ((BURST) == DMA_MBURST_INC8) || \
+ ((BURST) == DMA_MBURST_INC16))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_burst
+ * @{
+ */
+#define DMA_PBURST_SINGLE ((uint32_t)0x00000000)
+#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0)
+#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1)
+#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST)
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+ ((BURST) == DMA_PBURST_INC4) || \
+ ((BURST) == DMA_PBURST_INC8) || \
+ ((BURST) == DMA_PBURST_INC16))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupt_enable_definitions
+ * @{
+ */
+#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE)
+#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE)
+#define DMA_IT_FE ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions
+ * @{
+ */
+#define DMA_FLAG_FEIF0_4 ((uint32_t)0x00800001)
+#define DMA_FLAG_DMEIF0_4 ((uint32_t)0x00800004)
+#define DMA_FLAG_TEIF0_4 ((uint32_t)0x00000008)
+#define DMA_FLAG_HTIF0_4 ((uint32_t)0x00000010)
+#define DMA_FLAG_TCIF0_4 ((uint32_t)0x00000020)
+#define DMA_FLAG_FEIF1_5 ((uint32_t)0x00000040)
+#define DMA_FLAG_DMEIF1_5 ((uint32_t)0x00000100)
+#define DMA_FLAG_TEIF1_5 ((uint32_t)0x00000200)
+#define DMA_FLAG_HTIF1_5 ((uint32_t)0x00000400)
+#define DMA_FLAG_TCIF1_5 ((uint32_t)0x00000800)
+#define DMA_FLAG_FEIF2_6 ((uint32_t)0x00010000)
+#define DMA_FLAG_DMEIF2_6 ((uint32_t)0x00040000)
+#define DMA_FLAG_TEIF2_6 ((uint32_t)0x00080000)
+#define DMA_FLAG_HTIF2_6 ((uint32_t)0x00100000)
+#define DMA_FLAG_TCIF2_6 ((uint32_t)0x00200000)
+#define DMA_FLAG_FEIF3_7 ((uint32_t)0x00400000)
+#define DMA_FLAG_DMEIF3_7 ((uint32_t)0x01000000)
+#define DMA_FLAG_TEIF3_7 ((uint32_t)0x02000000)
+#define DMA_FLAG_HTIF3_7 ((uint32_t)0x04000000)
+#define DMA_FLAG_TCIF3_7 ((uint32_t)0x08000000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: specifies the DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Return the current DMA Stream FIFO filled level.
+ * @param __HANDLE__: DMA handle
+ * @retval The FIFO filling state.
+ * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
+ * and not empty.
+ * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+ * - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+ * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+ * - DMA_FIFOStatus_Empty: when FIFO is empty
+ * - DMA_FIFOStatus_Full: when FIFO is full
+ */
+#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
+
+/**
+ * @brief Enable the specified DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
+
+/**
+ * @brief Disable the specified DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Return the current DMA Stream transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+ DMA_FLAG_TCIF3_7)
+
+/**
+ * @brief Return the current DMA Stream half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+ DMA_FLAG_HTIF3_7)
+
+/**
+ * @brief Return the current DMA Stream transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+ DMA_FLAG_TEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream FIFO error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified FIFO error flag index.
+ */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+ DMA_FLAG_FEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream direct mode error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified direct mode error flag index.
+ */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ DMA_FLAG_DMEIF3_7)
+
+/**
+ * @brief Get the DMA Stream pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+ * @brief Clear the DMA Stream pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+ * @brief Enable the specified DMA Stream interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the specified DMA Stream interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Check whether the specified DMA Stream interrupt has occurred or not.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval The state of DMA_IT.
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+ ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
+ ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
+
+/**
+ * @brief Writes the number of data units to be transferred on the DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @param __COUNTER__: Number of data units to be transferred (from 0 to 65535)
+ * Number of data items depends only on the Peripheral data format.
+ *
+ * @note If Peripheral data format is Bytes: number of data units is equal
+ * to total number of bytes to be transferred.
+ *
+ * @note If Peripheral data format is Half-Word: number of data units is
+ * equal to total number of bytes to be transferred / 2.
+ *
+ * @note If Peripheral data format is Word: number of data units is equal
+ * to total number of bytes to be transferred / 4.
+ *
+ * @retval The number of remaining data units in the current DMAy Streamx transfer.
+ */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
+ * @param __HANDLE__: DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Stream transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
+
+
+/* Include DMA HAL Extension module */
+#include "stm32f4xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_dma2d.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,504 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma2d.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DMA2D HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA2D_H
+#define __STM32F4xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA2D
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+#define MAX_DMA2D_LAYER 2
+
+/**
+ * @brief DMA2D color Structure definition
+ */
+typedef struct
+{
+ uint32_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_ColorTypeDef;
+
+/**
+ * @brief DMA2D CLUT Structure definition
+ */
+typedef struct
+{
+ uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/
+
+ uint32_t CLUTColorMode; /*!< configures the DMA2D CLUT color mode.
+ This parameter can be one value of @ref DMA2D_CLUT_CM */
+
+ uint32_t Size; /*!< configures the DMA2D CLUT size.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+} DMA2D_CLUTCfgTypeDef;
+
+/**
+ * @brief DMA2D Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< configures the DMA2D transfer mode.
+ This parameter can be one value of @ref DMA2D_Mode */
+
+ uint32_t ColorMode; /*!< configures the color format of the output image.
+ This parameter can be one value of @ref DMA2D_Color_Mode */
+
+ uint32_t OutputOffset; /*!< Specifies the Offset value.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+} DMA2D_InitTypeDef;
+
+/**
+ * @brief DMA2D Layer structure definition
+ */
+typedef struct
+{
+ uint32_t InputOffset; /*!< configures the DMA2D foreground offset.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+ uint32_t InputColorMode; /*!< configures the DMA2D foreground color mode .
+ This parameter can be one value of @ref DMA2D_Input_Color_Mode */
+
+ uint32_t AlphaMode; /*!< configures the DMA2D foreground alpha mode.
+ This parameter can be one value of @ref DMA2D_ALPHA_MODE */
+
+ uint32_t InputAlpha; /*!< Specifies the DMA2D foreground alpha value and color value in case of A8 or A4 color mode.
+ This parameter must be a number between Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF
+ in case of A8 or A4 color mode (ARGB).
+ Otherwise, This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+
+} DMA2D_LayerCfgTypeDef;
+
+/**
+ * @brief HAL DMA2D State structures definition
+ */
+typedef enum
+{
+ HAL_DMA2D_STATE_RESET = 0x00, /*!< DMA2D not yet initialized or disabled */
+ HAL_DMA2D_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_DMA2D_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_DMA2D_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_DMA2D_STATE_ERROR = 0x04, /*!< DMA2D state error */
+ HAL_DMA2D_STATE_SUSPEND = 0x05 /*!< DMA2D process is suspended */
+}HAL_DMA2D_StateTypeDef;
+
+/**
+ * @brief DMA2D handle Structure definition
+ */
+typedef struct __DMA2D_HandleTypeDef
+{
+ DMA2D_TypeDef *Instance; /*!< DMA2D Register base address */
+
+ DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters */
+
+ void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback */
+
+ void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback */
+
+ DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA2D Lock */
+
+ __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state */
+
+ __IO uint32_t ErrorCode; /*!< DMA2D Error code */
+} DMA2D_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA2D_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DMA2D_Layer
+ * @{
+ */
+#define IS_DMA2D_LAYER(LAYER) ((LAYER) <= MAX_DMA2D_LAYER)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Error_Code
+ * @{
+ */
+#define HAL_DMA2D_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA2D_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA2D_ERROR_CE ((uint32_t)0x00000002) /*!< Configuration error */
+#define HAL_DMA2D_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Mode
+ * @{
+ */
+#define DMA2D_M2M ((uint32_t)0x00000000) /*!< DMA2D memory to memory transfer mode */
+#define DMA2D_M2M_PFC ((uint32_t)0x00010000) /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND ((uint32_t)0x00020000) /*!< DMA2D memory to memory with blending transfer mode */
+#define DMA2D_R2M ((uint32_t)0x00030000) /*!< DMA2D register to memory transfer mode */
+
+#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
+ ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Color_Mode
+ * @{
+ */
+#define DMA2D_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D color mode */
+#define DMA2D_RGB565 ((uint32_t)0x00000002) /*!< RGB565 DMA2D color mode */
+#define DMA2D_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 DMA2D color mode */
+
+#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \
+ ((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \
+ ((MODE_ARGB) == DMA2D_ARGB4444))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_COLOR_VALUE
+ * @{
+ */
+
+#define COLOR_VALUE ((uint32_t)0x000000FF) /*!< color value mask */
+
+#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= COLOR_VALUE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_SIZE
+ * @{
+ */
+#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16) /*!< DMA2D pixel per line */
+#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of line */
+
+#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Offset
+ * @{
+ */
+#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */
+
+#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Input_Color_Mode
+ * @{
+ */
+#define CM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 color mode */
+#define CM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 color mode */
+#define CM_RGB565 ((uint32_t)0x00000002) /*!< RGB565 color mode */
+#define CM_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 color mode */
+#define CM_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 color mode */
+#define CM_L8 ((uint32_t)0x00000005) /*!< L8 color mode */
+#define CM_AL44 ((uint32_t)0x00000006) /*!< AL44 color mode */
+#define CM_AL88 ((uint32_t)0x00000007) /*!< AL88 color mode */
+#define CM_L4 ((uint32_t)0x00000008) /*!< L4 color mode */
+#define CM_A8 ((uint32_t)0x00000009) /*!< A8 color mode */
+#define CM_A4 ((uint32_t)0x0000000A) /*!< A4 color mode */
+
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888) || \
+ ((INPUT_CM) == CM_RGB565) || ((INPUT_CM) == CM_ARGB1555) || \
+ ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8) || \
+ ((INPUT_CM) == CM_AL44) || ((INPUT_CM) == CM_AL88) || \
+ ((INPUT_CM) == CM_L4) || ((INPUT_CM) == CM_A8) || \
+ ((INPUT_CM) == CM_A4))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_ALPHA_MODE
+ * @{
+ */
+#define DMA2D_NO_MODIF_ALPHA ((uint32_t)0x00000000) /*!< No modification of the alpha channel value */
+#define DMA2D_REPLACE_ALPHA ((uint32_t)0x00000001) /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA ((uint32_t)0x00000002) /*!< Replace original alpha channel value by programmed alpha value
+ with original alpha channel value */
+
+#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+ ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
+ ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_CLUT_CM
+ * @{
+ */
+#define DMA2D_CCM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D C-LUT color mode */
+#define DMA2D_CCM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D C-LUT color mode */
+
+#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Size_Clut
+ * @{
+ */
+#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8) /*!< DMA2D C-LUT size */
+
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_DeadTime
+ * @{
+ */
+#define LINE_WATERMARK DMA2D_LWR_LW
+
+#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Interrupts
+ * @{
+ */
+#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
+#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< C-LUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< C-LUT Access Error Interrupt */
+#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
+#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
+#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
+
+#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
+ ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
+ ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Flag
+ * @{
+ */
+#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
+#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< C-LUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< C-LUT Access Error Interrupt Flag */
+#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
+
+#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
+ ((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
+ ((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA2D handle state
+ * @param __HANDLE__: specifies the DMA2D handle.
+ * @retval None
+ */
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
+
+/**
+ * @brief Enable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+/**
+ * @brief Disable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: C-LUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval The state of FLAG.
+ */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: C-LUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval None
+ */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA2D interrupt has occurred or not.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA2D_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_dma_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,92 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_EX_H
+#define __STM32F4xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL DMA Memory definition
+ */
+typedef enum
+{
+ MEMORY0 = 0x00, /*!< Memory 0 */
+ MEMORY1 = 0x01, /*!< Memory 1 */
+
+}HAL_DMA_MemoryTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_eth.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,2239 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_eth.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of ETH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_ETH_H
+#define __STM32F4xx_HAL_ETH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ETH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ETH_STATE_RESET = 0x00, /*!< Peripheral not yet Initialized or disabled */
+ HAL_ETH_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_ETH_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_ETH_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_ETH_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_WR = 0x42, /*!< Write process is ongoing */
+ HAL_ETH_STATE_BUSY_RD = 0x82, /*!< Read process is ongoing */
+ HAL_ETH_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ETH_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_ETH_StateTypeDef;
+
+/**
+ * @brief ETH Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t AutoNegotiation; /*!< Selects or not the AutoNegotiation mode for the external PHY
+ The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+ and the mode (half/full-duplex).
+ This parameter can be a value of @ref ETH_AutoNegotiation */
+
+ uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps.
+ This parameter can be a value of @ref ETH_Speed */
+
+ uint32_t DuplexMode; /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+ This parameter can be a value of @ref ETH_Duplex_Mode */
+
+ uint16_t PhyAddress; /*!< Ethernet PHY address.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint8_t *MACAddr; /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+
+ uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+ This parameter can be a value of @ref ETH_Rx_Mode */
+
+ uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software.
+ This parameter can be a value of @ref ETH_Checksum_Mode */
+
+ uint32_t MediaInterface ; /*!< Selects the media-independent interface or the reduced media-independent interface.
+ This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+ /**
+ * @brief ETH MAC Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t Watchdog; /*!< Selects or not the Watchdog timer
+ When enabled, the MAC allows no more then 2048 bytes to be received.
+ When disabled, the MAC can receive up to 16384 bytes.
+ This parameter can be a value of @ref ETH_watchdog */
+
+ uint32_t Jabber; /*!< Selects or not Jabber timer
+ When enabled, the MAC allows no more then 2048 bytes to be sent.
+ When disabled, the MAC can send up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Jabber */
+
+ uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission.
+ This parameter can be a value of @ref ETH_Inter_Frame_Gap */
+
+ uint32_t CarrierSense; /*!< Selects or not the Carrier Sense.
+ This parameter can be a value of @ref ETH_Carrier_Sense */
+
+ uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn,
+ ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+ in Half-Duplex mode.
+ This parameter can be a value of @ref ETH_Receive_Own */
+
+ uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode.
+ This parameter can be a value of @ref ETH_Loop_Back_Mode */
+
+ uint32_t ChecksumOffload; /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+ This parameter can be a value of @ref ETH_Checksum_Offload */
+
+ uint32_t RetryTransmission; /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+ when a collision occurs (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Retry_Transmission */
+
+ uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+ This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
+
+ uint32_t BackOffLimit; /*!< Selects the BackOff limit value.
+ This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+ uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Deferral_Check */
+
+ uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering).
+ This parameter can be a value of @ref ETH_Receive_All */
+
+ uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode.
+ This parameter can be a value of @ref ETH_Source_Addr_Filter */
+
+ uint32_t PassControlFrames; /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
+ This parameter can be a value of @ref ETH_Pass_Control_Frames */
+
+ uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames.
+ This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+ uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames.
+ This parameter can be a value of @ref ETH_Destination_Addr_Filter */
+
+ uint32_t PromiscuousMode; /*!< Selects or not the Promiscuous Mode
+ This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+ uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
+
+ uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
+
+ uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */
+
+ uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+ This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
+
+ uint32_t PauseLowThreshold; /*!< This field configures the threshold of the PAUSE to be checked for
+ automatic retransmission of PAUSE Frame.
+ This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+
+ uint32_t UnicastPauseFrameDetect; /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+ unicast address and unique multicast address).
+ This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
+
+ uint32_t ReceiveFlowControl; /*!< Enables or disables the MAC to decode the received Pause frame and
+ disable its transmitter for a specified time (Pause Time)
+ This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+ uint32_t TransmitFlowControl; /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+ or the MAC back-pressure operation (Half-Duplex mode)
+ This parameter can be a value of @ref ETH_Transmit_Flow_Control */
+
+ uint32_t VLANTagComparison; /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+ comparison and filtering.
+ This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
+
+ uint32_t VLANTagIdentifier; /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+ This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
+
+ uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode.
+ This parameter can be a value of @ref ETH_Receive_Store_Forward */
+
+ uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames.
+ This parameter can be a value of @ref ETH_Flush_Received_Frame */
+
+ uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode.
+ This parameter can be a value of @ref ETH_Transmit_Store_Forward */
+
+ uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control.
+ This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+ uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames.
+ This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+ uint32_t ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+ and length less than 64 bytes) including pad-bytes and CRC)
+ This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+ uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO.
+ This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+ uint32_t SecondFrameOperate; /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+ frame of Transmit data even before obtaining the status for the first frame.
+ This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+ uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats.
+ This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+ uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers.
+ This parameter can be a value of @ref ETH_Fixed_Burst */
+
+ uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+ This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
+
+ uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+ This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+
+ uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format.
+ This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
+
+ uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration.
+ This parameter can be a value of @ref ETH_DMA_Arbitration */
+} ETH_DMAInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Descriptors data structure definition
+ */
+
+typedef struct
+{
+ __IO uint32_t Status; /*!< Status */
+
+ uint32_t ControlBufferSize; /*!< Control and Buffer1, Buffer2 lengths */
+
+ uint32_t Buffer1Addr; /*!< Buffer1 address pointer */
+
+ uint32_t Buffer2NextDescAddr; /*!< Buffer2 or next descriptor address pointer */
+
+ /*!< Enhanced ETHERNET DMA PTP Descriptors */
+ uint32_t ExtendedStatus; /*!< Extended status for PTP receive descriptor */
+
+ uint32_t Reserved1; /*!< Reserved */
+
+ uint32_t TimeStampLow; /*!< Time Stamp Low value for transmit and receive */
+
+ uint32_t TimeStampHigh; /*!< Time Stamp High value for transmit and receive */
+
+} ETH_DMADescTypeDef;
+
+
+/**
+ * @brief Received Frame Informations structure definition
+ */
+typedef struct
+{
+ ETH_DMADescTypeDef *FSRxDesc; /*!< First Segment Rx Desc */
+
+ ETH_DMADescTypeDef *LSRxDesc; /*!< Last Segment Rx Desc */
+
+ uint32_t SegCount; /*!< Segment count */
+
+ uint32_t length; /*!< Frame length */
+
+ uint32_t buffer; /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+
+/**
+ * @brief ETH Handle Structure definition
+ */
+
+typedef struct
+{
+ ETH_TypeDef *Instance; /*!< Register base address */
+
+ ETH_InitTypeDef Init; /*!< Ethernet Init Configuration */
+
+ uint32_t LinkStatus; /*!< Ethernet link status */
+
+ ETH_DMADescTypeDef *RxDesc; /*!< Rx descriptor to Get */
+
+ ETH_DMADescTypeDef *TxDesc; /*!< Tx descriptor to Set */
+
+ ETH_DMARxFrameInfos RxFrameInfos; /*!< last Rx frame infos */
+
+ __IO HAL_ETH_StateTypeDef State; /*!< ETH communication state */
+
+ HAL_LockTypeDef Lock; /*!< ETH Lock */
+
+} ETH_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20)
+
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001)
+
+
+/* ETHERNET Errors */
+#define ETH_SUCCESS ((uint32_t)0)
+#define ETH_ERROR ((uint32_t)1)
+
+/** @defgroup ETH_Buffers_setting
+ * @{
+ */
+#define ETH_MAX_PACKET_SIZE ((uint32_t)1524) /*!< ETH_HEADER + ETH_EXTRA + VLAN_TAG + MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER ((uint32_t)14) /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC ((uint32_t)4) /*!< Ethernet CRC */
+#define ETH_EXTRA ((uint32_t)2) /*!< Extra bytes in some cases */
+#define VLAN_TAG ((uint32_t)4) /*!< optional 802.1q VLAN Tag */
+#define MIN_ETH_PAYLOAD ((uint32_t)46) /*!< Minimum Ethernet payload size */
+#define MAX_ETH_PAYLOAD ((uint32_t)1500) /*!< Maximum Ethernet payload size */
+#define JUMBO_FRAME_PAYLOAD ((uint32_t)9000) /*!< Jumbo frame payload size */
+
+ /* Ethernet driver receive buffers are organized in a chained linked-list, when
+ an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+ to the driver receive buffers memory.
+
+ Depending on the size of the received ethernet packet and the size of
+ each ethernet driver receive buffer, the received packet can take one or more
+ ethernet driver receive buffer.
+
+ In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE
+ and the total count of the driver receive buffers ETH_RXBUFNB.
+
+ The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_RX_BUF_SIZE
+ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/
+#ifndef ETH_RXBUFNB
+ #define ETH_RXBUFNB ((uint32_t)5 /* 5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+ /* Ethernet driver transmit buffers are organized in a chained linked-list, when
+ an ethernet packet is transmitted, Tx-DMA will transfer the packet from the
+ driver transmit buffers memory to the TxFIFO.
+
+ Depending on the size of the Ethernet packet to be transmitted and the size of
+ each ethernet driver transmit buffer, the packet to be transmitted can take
+ one or more ethernet driver transmit buffer.
+
+ In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE
+ and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+ The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_TX_BUF_SIZE
+ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 ethernet driver transmit buffers are used (in a chained linked list)*/
+#ifndef ETH_TXBUFNB
+ #define ETH_TXBUFNB ((uint32_t)5 /* 5 Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+
+/*
+ DMA Tx Desciptor
+ -----------------------------------------------------------------------------------------------
+ TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES2 | Buffer1 Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of TDES0 register: DMA Tx descriptor status register
+ */
+#define ETH_DMATXDESC_OWN ((uint32_t)0x80000000) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC ((uint32_t)0x40000000) /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS ((uint32_t)0x20000000) /*!< Last Segment */
+#define ETH_DMATXDESC_FS ((uint32_t)0x10000000) /*!< First Segment */
+#define ETH_DMATXDESC_DC ((uint32_t)0x08000000) /*!< Disable CRC */
+#define ETH_DMATXDESC_DP ((uint32_t)0x04000000) /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE ((uint32_t)0x02000000) /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC ((uint32_t)0x00C00000) /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS ((uint32_t)0x00000000) /*!< Do Nothing: Checksum Engine is bypassed */
+#define ETH_DMATXDESC_CIC_IPV4HEADER ((uint32_t)0x00400000) /*!< IPV4 header Checksum Insertion */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT ((uint32_t)0x00800000) /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL ((uint32_t)0x00C00000) /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */
+#define ETH_DMATXDESC_TER ((uint32_t)0x00200000) /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH ((uint32_t)0x00100000) /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS ((uint32_t)0x00020000) /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE ((uint32_t)0x00010000) /*!< IP Header Error */
+#define ETH_DMATXDESC_ES ((uint32_t)0x00008000) /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT ((uint32_t)0x00004000) /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF ((uint32_t)0x00002000) /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE ((uint32_t)0x00001000) /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA ((uint32_t)0x00000800) /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC ((uint32_t)0x00000400) /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO ((uint32_t)0x00000200) /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC ((uint32_t)0x00000100) /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF ((uint32_t)0x00000080) /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC ((uint32_t)0x00000078) /*!< Collision Count */
+#define ETH_DMATXDESC_ED ((uint32_t)0x00000004) /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF ((uint32_t)0x00000002) /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB ((uint32_t)0x00000001) /*!< Deferred Bit */
+
+/**
+ * @brief Bit definition of TDES1 register
+ */
+#define ETH_DMATXDESC_TBS2 ((uint32_t)0x1FFF0000) /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1 ((uint32_t)0x00001FFF) /*!< Transmit Buffer1 Size */
+
+/**
+ * @brief Bit definition of TDES2 register
+ */
+#define ETH_DMATXDESC_B1AP ((uint32_t)0xFFFFFFFF) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of TDES3 register
+ */
+#define ETH_DMATXDESC_B2AP ((uint32_t)0xFFFFFFFF) /*!< Buffer2 Address Pointer */
+
+ /*---------------------------------------------------------------------------------------------
+ TDES6 | Transmit Time Stamp Low [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES7 | Transmit Time Stamp High [31:0] |
+ ----------------------------------------------------------------------------------------------*/
+
+/* Bit definition of TDES6 register */
+ #define ETH_DMAPTPTXDESC_TTSL ((uint32_t)0xFFFFFFFF) /* Transmit Time Stamp Low */
+
+/* Bit definition of TDES7 register */
+ #define ETH_DMAPTPTXDESC_TTSH ((uint32_t)0xFFFFFFFF) /* Transmit Time Stamp High */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ETH_DMA_Rx_descriptor
+ * @{
+ */
+
+/*
+ DMA Rx Descriptor
+ --------------------------------------------------------------------------------------------------------------------
+ RDES0 | OWN(31) | Status [30:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES2 | Buffer1 Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of RDES0 register: DMA Rx descriptor status register
+ */
+#define ETH_DMARXDESC_OWN ((uint32_t)0x80000000) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMARXDESC_AFM ((uint32_t)0x40000000) /*!< DA Filter Fail for the rx frame */
+#define ETH_DMARXDESC_FL ((uint32_t)0x3FFF0000) /*!< Receive descriptor frame length */
+#define ETH_DMARXDESC_ES ((uint32_t)0x00008000) /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE ((uint32_t)0x00004000) /*!< Descriptor error: no more descriptors for receive frame */
+#define ETH_DMARXDESC_SAF ((uint32_t)0x00002000) /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE ((uint32_t)0x00001000) /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE ((uint32_t)0x00000800) /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN ((uint32_t)0x00000400) /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS ((uint32_t)0x00000200) /*!< First descriptor of the frame */
+#define ETH_DMARXDESC_LS ((uint32_t)0x00000100) /*!< Last descriptor of the frame */
+#define ETH_DMARXDESC_IPV4HCE ((uint32_t)0x00000080) /*!< IPC Checksum Error: Rx Ipv4 header checksum error */
+#define ETH_DMARXDESC_LC ((uint32_t)0x00000040) /*!< Late collision occurred during reception */
+#define ETH_DMARXDESC_FT ((uint32_t)0x00000020) /*!< Frame type - Ethernet, otherwise 802.3 */
+#define ETH_DMARXDESC_RWT ((uint32_t)0x00000010) /*!< Receive Watchdog Timeout: watchdog timer expired during reception */
+#define ETH_DMARXDESC_RE ((uint32_t)0x00000008) /*!< Receive error: error reported by MII interface */
+#define ETH_DMARXDESC_DBE ((uint32_t)0x00000004) /*!< Dribble bit error: frame contains non int multiple of 8 bits */
+#define ETH_DMARXDESC_CE ((uint32_t)0x00000002) /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE ((uint32_t)0x00000001) /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/**
+ * @brief Bit definition of RDES1 register
+ */
+#define ETH_DMARXDESC_DIC ((uint32_t)0x80000000) /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2 ((uint32_t)0x1FFF0000) /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER ((uint32_t)0x00008000) /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH ((uint32_t)0x00004000) /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1 ((uint32_t)0x00001FFF) /*!< Receive Buffer1 Size */
+
+/**
+ * @brief Bit definition of RDES2 register
+ */
+#define ETH_DMARXDESC_B1AP ((uint32_t)0xFFFFFFFF) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of RDES3 register
+ */
+#define ETH_DMARXDESC_B2AP ((uint32_t)0xFFFFFFFF) /*!< Buffer2 Address Pointer */
+
+/*---------------------------------------------------------------------------------------------------------------------
+ RDES4 | Reserved[31:15] | Extended Status [14:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES5 | Reserved[31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES6 | Receive Time Stamp Low [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES7 | Receive Time Stamp High [31:0] |
+ --------------------------------------------------------------------------------------------------------------------*/
+
+/* Bit definition of RDES4 register */
+#define ETH_DMAPTPRXDESC_PTPV ((uint32_t)0x00002000) /* PTP Version */
+#define ETH_DMAPTPRXDESC_PTPFT ((uint32_t)0x00001000) /* PTP Frame Type */
+#define ETH_DMAPTPRXDESC_PTPMT ((uint32_t)0x00000F00) /* PTP Message Type */
+ #define ETH_DMAPTPRXDESC_PTPMT_SYNC ((uint32_t)0x00000100) /* SYNC message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP ((uint32_t)0x00000200) /* FollowUp message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ ((uint32_t)0x00000300) /* DelayReq message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP ((uint32_t)0x00000400) /* DelayResp message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE ((uint32_t)0x00000500) /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG ((uint32_t)0x00000600) /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700) /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_IPV6PR ((uint32_t)0x00000080) /* IPv6 Packet Received */
+#define ETH_DMAPTPRXDESC_IPV4PR ((uint32_t)0x00000040) /* IPv4 Packet Received */
+#define ETH_DMAPTPRXDESC_IPCB ((uint32_t)0x00000020) /* IP Checksum Bypassed */
+#define ETH_DMAPTPRXDESC_IPPE ((uint32_t)0x00000010) /* IP Payload Error */
+#define ETH_DMAPTPRXDESC_IPHE ((uint32_t)0x00000008) /* IP Header Error */
+#define ETH_DMAPTPRXDESC_IPPT ((uint32_t)0x00000007) /* IP Payload Type */
+ #define ETH_DMAPTPRXDESC_IPPT_UDP ((uint32_t)0x00000001) /* UDP payload encapsulated in the IP datagram */
+ #define ETH_DMAPTPRXDESC_IPPT_TCP ((uint32_t)0x00000002) /* TCP payload encapsulated in the IP datagram */
+ #define ETH_DMAPTPRXDESC_IPPT_ICMP ((uint32_t)0x00000003) /* ICMP payload encapsulated in the IP datagram */
+
+/* Bit definition of RDES6 register */
+#define ETH_DMAPTPRXDESC_RTSL ((uint32_t)0xFFFFFFFF) /* Receive Time Stamp Low */
+
+/* Bit definition of RDES7 register */
+#define ETH_DMAPTPRXDESC_RTSH ((uint32_t)0xFFFFFFFF) /* Receive Time Stamp High */
+
+
+ /** @defgroup ETH_AutoNegotiation
+ * @{
+ */
+#define ETH_AUTONEGOTIATION_ENABLE ((uint32_t)0x00000001)
+#define ETH_AUTONEGOTIATION_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+ ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup ETH_Speed
+ * @{
+ */
+#define ETH_SPEED_10M ((uint32_t)0x00000000)
+#define ETH_SPEED_100M ((uint32_t)0x00004000)
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+ ((SPEED) == ETH_SPEED_100M))
+/**
+ * @}
+ */
+/** @defgroup ETH_Duplex_Mode
+ * @{
+ */
+#define ETH_MODE_FULLDUPLEX ((uint32_t)0x00000800)
+#define ETH_MODE_HALFDUPLEX ((uint32_t)0x00000000)
+#define IS_ETH_DUPLEX_MODE(MODE) (((MODE) == ETH_MODE_FULLDUPLEX) || \
+ ((MODE) == ETH_MODE_HALFDUPLEX))
+/**
+ * @}
+ */
+/** @defgroup ETH_Rx_Mode
+ * @{
+ */
+#define ETH_RXPOLLING_MODE ((uint32_t)0x00000000)
+#define ETH_RXINTERRUPT_MODE ((uint32_t)0x00000001)
+#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \
+ ((MODE) == ETH_RXINTERRUPT_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Mode
+ * @{
+ */
+#define ETH_CHECKSUM_BY_HARDWARE ((uint32_t)0x00000000)
+#define ETH_CHECKSUM_BY_SOFTWARE ((uint32_t)0x00000001)
+#define IS_ETH_CHECKSUM_MODE(MODE) (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+ ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Media_Interface
+ * @{
+ */
+#define ETH_MEDIA_INTERFACE_MII ((uint32_t)0x00000000)
+#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)SYSCFG_PMC_MII_RMII_SEL)
+#define IS_ETH_MEDIA_INTERFACE(MODE) (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+ ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_watchdog
+ * @{
+ */
+#define ETH_WATCHDOG_ENABLE ((uint32_t)0x00000000)
+#define ETH_WATCHDOG_DISABLE ((uint32_t)0x00800000)
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+ ((CMD) == ETH_WATCHDOG_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Jabber
+ * @{
+ */
+#define ETH_JABBER_ENABLE ((uint32_t)0x00000000)
+#define ETH_JABBER_DISABLE ((uint32_t)0x00400000)
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+ ((CMD) == ETH_JABBER_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Inter_Frame_Gap
+ * @{
+ */
+#define ETH_INTERFRAMEGAP_96BIT ((uint32_t)0x00000000) /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT ((uint32_t)0x00020000) /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT ((uint32_t)0x00040000) /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT ((uint32_t)0x00060000) /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT ((uint32_t)0x00080000) /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT ((uint32_t)0x000A0000) /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT ((uint32_t)0x000C0000) /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT ((uint32_t)0x000E0000) /*!< minimum IFG between frames during transmission is 40Bit */
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Carrier_Sense
+ * @{
+ */
+#define ETH_CARRIERSENCE_ENABLE ((uint32_t)0x00000000)
+#define ETH_CARRIERSENCE_DISABLE ((uint32_t)0x00010000)
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+ ((CMD) == ETH_CARRIERSENCE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Own
+ * @{
+ */
+#define ETH_RECEIVEOWN_ENABLE ((uint32_t)0x00000000)
+#define ETH_RECEIVEOWN_DISABLE ((uint32_t)0x00002000)
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+ ((CMD) == ETH_RECEIVEOWN_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Loop_Back_Mode
+ * @{
+ */
+#define ETH_LOOPBACKMODE_ENABLE ((uint32_t)0x00001000)
+#define ETH_LOOPBACKMODE_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+ ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Offload
+ * @{
+ */
+#define ETH_CHECKSUMOFFLAOD_ENABLE ((uint32_t)0x00000400)
+#define ETH_CHECKSUMOFFLAOD_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+ ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Retry_Transmission
+ * @{
+ */
+#define ETH_RETRYTRANSMISSION_ENABLE ((uint32_t)0x00000000)
+#define ETH_RETRYTRANSMISSION_DISABLE ((uint32_t)0x00000200)
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+ ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip
+ * @{
+ */
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE ((uint32_t)0x00000080)
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+ ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Back_Off_Limit
+ * @{
+ */
+#define ETH_BACKOFFLIMIT_10 ((uint32_t)0x00000000)
+#define ETH_BACKOFFLIMIT_8 ((uint32_t)0x00000020)
+#define ETH_BACKOFFLIMIT_4 ((uint32_t)0x00000040)
+#define ETH_BACKOFFLIMIT_1 ((uint32_t)0x00000060)
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_1))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Deferral_Check
+ * @{
+ */
+#define ETH_DEFFERRALCHECK_ENABLE ((uint32_t)0x00000010)
+#define ETH_DEFFERRALCHECK_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+ ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_All
+ * @{
+ */
+#define ETH_RECEIVEALL_ENABLE ((uint32_t)0x80000000)
+#define ETH_RECEIVEAll_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEAll_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Source_Addr_Filter
+ * @{
+ */
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE ((uint32_t)0x00000200)
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE ((uint32_t)0x00000300)
+#define ETH_SOURCEADDRFILTER_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pass_Control_Frames
+ * @{
+ */
+#define ETH_PASSCONTROLFRAMES_BLOCKALL ((uint32_t)0x00000040) /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL ((uint32_t)0x00000080) /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0) /*!< MAC forwards control frames that pass the Address Filter. */
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Broadcast_Frames_Reception
+ * @{
+ */
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE ((uint32_t)0x00000000)
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE ((uint32_t)0x00000020)
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+ ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Destination_Addr_Filter
+ * @{
+ */
+#define ETH_DESTINATIONADDRFILTER_NORMAL ((uint32_t)0x00000000)
+#define ETH_DESTINATIONADDRFILTER_INVERSE ((uint32_t)0x00000008)
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+ ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Promiscuous_Mode
+ * @{
+ */
+#define ETH_PROMISCIOUSMODE_ENABLE ((uint32_t)0x00000001)
+#define ETH_PROMISCIOUSMODE_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_PROMISCIOUS_MODE(CMD) (((CMD) == ETH_PROMISCIOUSMODE_ENABLE) || \
+ ((CMD) == ETH_PROMISCIOUSMODE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Multicast_Frames_Filter
+ * @{
+ */
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000404)
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000004)
+#define ETH_MULTICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000)
+#define ETH_MULTICASTFRAMESFILTER_NONE ((uint32_t)0x00000010)
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Frames_Filter
+ * @{
+ */
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402)
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000002)
+#define ETH_UNICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000)
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pause_Time
+ * @{
+ */
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Zero_Quanta_Pause
+ * @{
+ */
+#define ETH_ZEROQUANTAPAUSE_ENABLE ((uint32_t)0x00000000)
+#define ETH_ZEROQUANTAPAUSE_DISABLE ((uint32_t)0x00000080)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD) (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+ ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pause_Low_Threshold
+ * @{
+ */
+#define ETH_PAUSELOWTHRESHOLD_MINUS4 ((uint32_t)0x00000000) /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28 ((uint32_t)0x00000010) /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144 ((uint32_t)0x00000020) /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256 ((uint32_t)0x00000030) /*!< Pause time minus 256 slot times */
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect
+ * @{
+ */
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE ((uint32_t)0x00000008)
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+ ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Flow_Control
+ * @{
+ */
+#define ETH_RECEIVEFLOWCONTROL_ENABLE ((uint32_t)0x00000004)
+#define ETH_RECEIVEFLOWCONTROL_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Flow_Control
+ * @{
+ */
+#define ETH_TRANSMITFLOWCONTROL_ENABLE ((uint32_t)0x00000002)
+#define ETH_TRANSMITFLOWCONTROL_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_VLAN_Tag_Comparison
+ * @{
+ */
+#define ETH_VLANTAGCOMPARISON_12BIT ((uint32_t)0x00010000)
+#define ETH_VLANTAGCOMPARISON_16BIT ((uint32_t)0x00000000)
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+ ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses
+ * @{
+ */
+#define ETH_MAC_ADDRESS0 ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESS1 ((uint32_t)0x00000008)
+#define ETH_MAC_ADDRESS2 ((uint32_t)0x00000010)
+#define ETH_MAC_ADDRESS3 ((uint32_t)0x00000018)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA_filed_of_received_frames
+ * @{
+ */
+#define ETH_MAC_ADDRESSFILTER_SA ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESSFILTER_DA ((uint32_t)0x00000008)
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+ ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes
+ * @{
+ */
+#define ETH_MAC_ADDRESSMASK_BYTE6 ((uint32_t)0x20000000) /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5 ((uint32_t)0x10000000) /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4 ((uint32_t)0x08000000) /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3 ((uint32_t)0x04000000) /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2 ((uint32_t)0x02000000) /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1 ((uint32_t)0x01000000) /*!< Mask MAC Address low reg bits [70] */
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Debug_flags
+ * @{
+ */
+#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */
+
+#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */
+
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */
+
+#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+
+#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */
+
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */
+
+#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */
+
+#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */
+
+#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000060) /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000060) /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000060) /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#define ETH_MAC_READCONTROLLER_ FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */
+
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */
+
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */
+
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_AVTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame
+ * @{
+ */
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE ((uint32_t)0x00000000)
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE ((uint32_t)0x04000000)
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+ ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Store_Forward
+ * @{
+ */
+#define ETH_RECEIVESTOREFORWARD_ENABLE ((uint32_t)0x02000000)
+#define ETH_RECEIVESTOREFORWARD_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Flush_Received_Frame
+ * @{
+ */
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE ((uint32_t)0x00000000)
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE ((uint32_t)0x01000000)
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+ ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Store_Forward
+ * @{
+ */
+#define ETH_TRANSMITSTOREFORWARD_ENABLE ((uint32_t)0x00200000)
+#define ETH_TRANSMITSTOREFORWARD_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Threshold_Control
+ * @{
+ */
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000) /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00004000) /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES ((uint32_t)0x00008000) /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES ((uint32_t)0x0000C000) /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES ((uint32_t)0x00010000) /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00014000) /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES ((uint32_t)0x00018000) /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES ((uint32_t)0x0001C000) /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Error_Frames
+ * @{
+ */
+#define ETH_FORWARDERRORFRAMES_ENABLE ((uint32_t)0x00000080)
+#define ETH_FORWARDERRORFRAMES_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames
+ * @{
+ */
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE ((uint32_t)0x00000040)
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Threshold_Control
+ * @{
+ */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000) /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00000008) /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES ((uint32_t)0x00000010) /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00000018) /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Second_Frame_Operate
+ * @{
+ */
+#define ETH_SECONDFRAMEOPERARTE_ENABLE ((uint32_t)0x00000004)
+#define ETH_SECONDFRAMEOPERARTE_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+ ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Address_Aligned_Beats
+ * @{
+ */
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE ((uint32_t)0x02000000)
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+ ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Fixed_Burst
+ * @{
+ */
+#define ETH_FIXEDBURST_ENABLE ((uint32_t)0x00010000)
+#define ETH_FIXEDBURST_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+ ((CMD) == ETH_FIXEDBURST_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length
+ * @{
+ */
+#define ETH_RXDMABURSTLENGTH_1BEAT ((uint32_t)0x00020000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT ((uint32_t)0x00040000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT ((uint32_t)0x00080000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT ((uint32_t)0x00100000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT ((uint32_t)0x00200000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT ((uint32_t)0x00400000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01020000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01040000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01080000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01100000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01200000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01400000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length
+ * @{
+ */
+#define ETH_TXDMABURSTLENGTH_1BEAT ((uint32_t)0x00000100) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT ((uint32_t)0x00000200) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT ((uint32_t)0x00000400) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT ((uint32_t)0x00000800) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT ((uint32_t)0x00001000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT ((uint32_t)0x00002000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01000100) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01000200) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01000400) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01000800) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01001000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01002000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+
+/** @defgroup ETH_DMA_Enhanced_descriptor_format
+ * @{
+ */
+#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE ((uint32_t)0x00000080)
+#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE ((uint32_t)0x00000000)
+
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+ ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+/**
+ * @}
+ */
+
+/**
+ * @brief ETH DMA Descriptor SkipLength
+ */
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1F)
+
+
+/** @defgroup ETH_DMA_Arbitration
+ * @{
+ */
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1 ((uint32_t)0x00000000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1 ((uint32_t)0x00004000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1 ((uint32_t)0x00008000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1 ((uint32_t)0x0000C000)
+#define ETH_DMAARBITRATION_RXPRIORTX ((uint32_t)0x00000002)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_flags
+ * @{
+ */
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+ ((FLAG) == ETH_DMATXDESC_IC) || \
+ ((FLAG) == ETH_DMATXDESC_LS) || \
+ ((FLAG) == ETH_DMATXDESC_FS) || \
+ ((FLAG) == ETH_DMATXDESC_DC) || \
+ ((FLAG) == ETH_DMATXDESC_DP) || \
+ ((FLAG) == ETH_DMATXDESC_TTSE) || \
+ ((FLAG) == ETH_DMATXDESC_TER) || \
+ ((FLAG) == ETH_DMATXDESC_TCH) || \
+ ((FLAG) == ETH_DMATXDESC_TTSS) || \
+ ((FLAG) == ETH_DMATXDESC_IHE) || \
+ ((FLAG) == ETH_DMATXDESC_ES) || \
+ ((FLAG) == ETH_DMATXDESC_JT) || \
+ ((FLAG) == ETH_DMATXDESC_FF) || \
+ ((FLAG) == ETH_DMATXDESC_PCE) || \
+ ((FLAG) == ETH_DMATXDESC_LCA) || \
+ ((FLAG) == ETH_DMATXDESC_NC) || \
+ ((FLAG) == ETH_DMATXDESC_LCO) || \
+ ((FLAG) == ETH_DMATXDESC_EC) || \
+ ((FLAG) == ETH_DMATXDESC_VF) || \
+ ((FLAG) == ETH_DMATXDESC_CC) || \
+ ((FLAG) == ETH_DMATXDESC_ED) || \
+ ((FLAG) == ETH_DMATXDESC_UF) || \
+ ((FLAG) == ETH_DMATXDESC_DB))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment
+ * @{
+ */
+#define ETH_DMATXDESC_LASTSEGMENTS ((uint32_t)0x40000000) /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT ((uint32_t)0x20000000) /*!< First Segment */
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+ ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control
+ * @{
+ */
+#define ETH_DMATXDESC_CHECKSUMBYPASS ((uint32_t)0x00000000) /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER ((uint32_t)0x00400000) /*!< IPv4 header checksum insertion */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT ((uint32_t)0x00800000) /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL ((uint32_t)0x00C00000) /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+/**
+ * @brief ETH DMA Tx Desciptor buffer size
+ */
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Rx_descriptor_flags
+ * @{
+ */
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+ ((FLAG) == ETH_DMARXDESC_AFM) || \
+ ((FLAG) == ETH_DMARXDESC_ES) || \
+ ((FLAG) == ETH_DMARXDESC_DE) || \
+ ((FLAG) == ETH_DMARXDESC_SAF) || \
+ ((FLAG) == ETH_DMARXDESC_LE) || \
+ ((FLAG) == ETH_DMARXDESC_OE) || \
+ ((FLAG) == ETH_DMARXDESC_VLAN) || \
+ ((FLAG) == ETH_DMARXDESC_FS) || \
+ ((FLAG) == ETH_DMARXDESC_LS) || \
+ ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+ ((FLAG) == ETH_DMARXDESC_LC) || \
+ ((FLAG) == ETH_DMARXDESC_FT) || \
+ ((FLAG) == ETH_DMARXDESC_RWT) || \
+ ((FLAG) == ETH_DMARXDESC_RE) || \
+ ((FLAG) == ETH_DMARXDESC_DBE) || \
+ ((FLAG) == ETH_DMARXDESC_CE) || \
+ ((FLAG) == ETH_DMARXDESC_MAMPCE))
+
+/* ETHERNET DMA PTP Rx descriptor extended flags --------------------------------*/
+#define IS_ETH_DMAPTPRXDESC_GET_EXTENDED_FLAG(FLAG) (((FLAG) == ETH_DMAPTPRXDESC_PTPV) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_PTPFT) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_PTPMT) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPV6PR) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPV4PR) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPCB) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPPE) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPHE) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPPT))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers_
+ * @{
+ */
+#define ETH_DMARXDESC_BUFFER1 ((uint32_t)0x00000000) /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2 ((uint32_t)0x00000001) /*!< DMA Rx Desc Buffer2 */
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+ ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+
+
+/* ETHERNET DMA Tx descriptors Collision Count Shift */
+#define ETH_DMATXDESC_COLLISION_COUNTSHIFT ((uint32_t)3)
+
+/* ETHERNET DMA Tx descriptors Buffer2 Size Shift */
+#define ETH_DMATXDESC_BUFFER2_SIZESHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame Length Shift */
+#define ETH_DMARXDESC_FRAME_LENGTHSHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Buffer2 Size Shift */
+#define ETH_DMARXDESC_BUFFER2_SIZESHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame length Shift */
+#define ETH_DMARXDESC_FRAMELENGTHSHIFT ((uint32_t)16)
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_PMT_Flags
+ * @{
+ */
+#define ETH_PMT_FLAG_WUFFRPR ((uint32_t)0x80000000) /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR ((uint32_t)0x00000040) /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR ((uint32_t)0x00000020) /*!< Magic Packet Received */
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+ ((FLAG) == ETH_PMT_FLAG_MPR))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Tx_Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_TGF ((uint32_t)0x00200000) /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC ((uint32_t)0x00008000) /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC ((uint32_t)0x00004000) /*!< When Tx good single col counter reaches half the maximum value */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Rx_Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_RGUF ((uint32_t)0x10020000) /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE ((uint32_t)0x10000040) /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE ((uint32_t)0x10000020) /*!< When Rx crc error counter reaches half the maximum value */
+#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFF) == 0x00) || (((IT) & (uint32_t)0xEFFDFF9F) == 0x00)) && \
+ ((IT) != 0x00))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+ ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+ ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Registers
+ * @{
+ */
+#define ETH_MMCCR ((uint32_t)0x00000100) /*!< MMC CR register */
+#define ETH_MMCRIR ((uint32_t)0x00000104) /*!< MMC RIR register */
+#define ETH_MMCTIR ((uint32_t)0x00000108) /*!< MMC TIR register */
+#define ETH_MMCRIMR ((uint32_t)0x0000010C) /*!< MMC RIMR register */
+#define ETH_MMCTIMR ((uint32_t)0x00000110) /*!< MMC TIMR register */
+#define ETH_MMCTGFSCCR ((uint32_t)0x0000014C) /*!< MMC TGFSCCR register */
+#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150) /*!< MMC TGFMSCCR register */
+#define ETH_MMCTGFCR ((uint32_t)0x00000168) /*!< MMC TGFCR register */
+#define ETH_MMCRFCECR ((uint32_t)0x00000194) /*!< MMC RFCECR register */
+#define ETH_MMCRFAECR ((uint32_t)0x00000198) /*!< MMC RFAECR register */
+#define ETH_MMCRGUFCR ((uint32_t)0x000001C4) /*!< MMC RGUFCR register */
+
+/**
+ * @brief ETH MMC registers
+ */
+#define IS_ETH_MMC_REGISTER(REG) (((REG) == ETH_MMCCR) || ((REG) == ETH_MMCRIR) || \
+ ((REG) == ETH_MMCTIR) || ((REG) == ETH_MMCRIMR) || \
+ ((REG) == ETH_MMCTIMR) || ((REG) == ETH_MMCTGFSCCR) || \
+ ((REG) == ETH_MMCTGFMSCCR) || ((REG) == ETH_MMCTGFCR) || \
+ ((REG) == ETH_MMCRFCECR) || ((REG) == ETH_MMCRFAECR) || \
+ ((REG) == ETH_MMCRGUFCR))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Flags
+ * @{
+ */
+#define ETH_MAC_FLAG_TST ((uint32_t)0x00000200) /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT ((uint32_t)0x00000040) /*!< MMC transmit flag */
+#define ETH_MAC_FLAG_MMCR ((uint32_t)0x00000020) /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC ((uint32_t)0x00000010) /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT ((uint32_t)0x00000008) /*!< PMT flag (on MAC) */
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+ ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+ ((FLAG) == ETH_MAC_FLAG_PMT))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Flags
+ * @{
+ */
+#define ETH_DMA_FLAG_TST ((uint32_t)0x20000000) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT ((uint32_t)0x10000000) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC ((uint32_t)0x08000000) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000) /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR ((uint32_t)0x01000000) /*!< Error bits 0-write trnsf, 1-read transfr */
+#define ETH_DMA_FLAG_ACCESSERROR ((uint32_t)0x02000000) /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS ((uint32_t)0x00010000) /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS ((uint32_t)0x00008000) /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER ((uint32_t)0x00004000) /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE ((uint32_t)0x00002000) /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET ((uint32_t)0x00000400) /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT ((uint32_t)0x00000200) /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS ((uint32_t)0x00000100) /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU ((uint32_t)0x00000080) /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R ((uint32_t)0x00000040) /*!< Receive flag */
+#define ETH_DMA_FLAG_TU ((uint32_t)0x00000020) /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO ((uint32_t)0x00000010) /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT ((uint32_t)0x00000008) /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU ((uint32_t)0x00000004) /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS ((uint32_t)0x00000002) /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T ((uint32_t)0x00000001) /*!< Transmit flag */
+
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800) == 0x00) && ((FLAG) != 0x00))
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+ ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+ ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+ ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+ ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+ ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+ ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+ ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+ ((FLAG) == ETH_DMA_FLAG_T))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Interrupts
+ * @{
+ */
+#define ETH_MAC_IT_TST ((uint32_t)0x00000200) /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT ((uint32_t)0x00000040) /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR ((uint32_t)0x00000020) /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC ((uint32_t)0x00000010) /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT ((uint32_t)0x00000008) /*!< PMT interrupt (on MAC) */
+#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF7) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+ ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+ ((IT) == ETH_MAC_IT_PMT))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Interrupts
+ * @{
+ */
+#define ETH_DMA_IT_TST ((uint32_t)0x20000000) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT ((uint32_t)0x10000000) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC ((uint32_t)0x08000000) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS ((uint32_t)0x00010000) /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS ((uint32_t)0x00008000) /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER ((uint32_t)0x00004000) /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE ((uint32_t)0x00002000) /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET ((uint32_t)0x00000400) /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT ((uint32_t)0x00000200) /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS ((uint32_t)0x00000100) /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU ((uint32_t)0x00000080) /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R ((uint32_t)0x00000040) /*!< Receive interrupt */
+#define ETH_DMA_IT_TU ((uint32_t)0x00000020) /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO ((uint32_t)0x00000010) /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT ((uint32_t)0x00000008) /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU ((uint32_t)0x00000004) /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS ((uint32_t)0x00000002) /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T ((uint32_t)0x00000001) /*!< Transmit interrupt */
+
+#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+ ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+ ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+ ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+ ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+ ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+ ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+ ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+ ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_transmit_process_state_
+ * @{
+ */
+#define ETH_DMA_TRANSMITPROCESS_STOPPED ((uint32_t)0x00000000) /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING ((uint32_t)0x00100000) /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING ((uint32_t)0x00200000) /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING ((uint32_t)0x00300000) /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED ((uint32_t)0x00600000) /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING ((uint32_t)0x00700000) /*!< Running - closing Rx descriptor */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ETH_DMA_receive_process_state_
+ * @{
+ */
+#define ETH_DMA_RECEIVEPROCESS_STOPPED ((uint32_t)0x00000000) /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING ((uint32_t)0x00020000) /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING ((uint32_t)0x00060000) /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED ((uint32_t)0x00080000) /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING ((uint32_t)0x000A0000) /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING ((uint32_t)0x000E0000) /*!< Running - queuing the receive frame into host memory */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_overflow_
+ * @{
+ */
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER ((uint32_t)0x10000000) /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000) /*!< Overflow bit for missed frame counter */
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+ ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+/**
+ * @}
+ */
+
+/* ETHERNET MAC address offsets */
+#define ETH_MAC_ADDR_HBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40) /* ETHERNET MAC address high offset */
+#define ETH_MAC_ADDR_LBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44) /* ETHERNET MAC address low offset */
+
+/* ETHERNET MACMIIAR register Mask */
+#define MACMIIAR_CR_MASK ((uint32_t)0xFFFFFFE3)
+
+/* ETHERNET MACCR register Mask */
+#define MACCR_CLEAR_MASK ((uint32_t)0xFF20810F)
+
+/* ETHERNET MACFCR register Mask */
+#define MACFCR_CLEAR_MASK ((uint32_t)0x0000FF41)
+
+
+/* ETHERNET DMAOMR register Mask */
+#define DMAOMR_CLEAR_MASK ((uint32_t)0xF8DE3F23)
+
+
+/* ETHERNET Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH 8
+
+/* ETHERNET Missed frames counter Shift */
+#define ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT 17
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset ETH handle state
+ * @param __HANDLE__: specifies the ETH handle.
+ * @retval None
+ */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA Tx Desc flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA Rx Desc flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+ * @brief Disables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+ * @brief Set the specified DMA Rx Desc Own bit.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+ * @brief Returns the specified ETHERNET DMA Tx Desc collision count.
+ * @param __HANDLE__: ETH Handle
+ * @retval The Transmit descriptor collision counter value.
+ */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__) (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+ * @brief Set the specified DMA Tx Desc Own bit.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+ * @brief Enables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+ * @brief Disables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+ * @brief Selects the specified ETHERNET DMA Tx Desc Checksum Insertion.
+ * @param __HANDLE__: ETH Handle
+ * @param __CHECKSUM__: specifies is the DMA Tx desc checksum insertion.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+ * @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__) ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+ * @brief Enables the DMA Tx Desc CRC.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+ * @brief Disables the DMA Tx Desc CRC.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+ * @brief Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+ * @brief Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/**
+ * @brief Enables the specified ETHERNET MAC interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET MAC interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Initiate a Pause Control Frame (Full-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the ETHERNET flow control busy bit is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @retval The new state of flow control busy status bit (SET or RESET).
+ */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__) (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Enables the MAC Back Pressure operation activation (Half-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Disables the MAC BackPressure operation activation (Half-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the specified ETHERNET MAC flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_FLAG_TST : Time stamp trigger flag
+ * @arg ETH_MAC_FLAG_MMCT : MMC transmit flag
+ * @arg ETH_MAC_FLAG_MMCR : MMC receive flag
+ * @arg ETH_MAC_FLAG_MMC : MMC flag
+ * @arg ETH_MAC_FLAG_PMT : PMT flag
+ * @retval The state of ETHERNET MAC flag.
+ */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Enables the specified ETHERNET DMA interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+ * enabled @defgroup ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET DMA interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+ * disabled. @defgroup ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Clears the ETHERNET DMA IT pending bit.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @defgroup ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA flag is set or not.
+* @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check. @defgroup ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to clear. @defgroup ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA overflow flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __OVERFLOW__: specifies the DMA overflow flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+ * @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+ * @retval The state of ETHERNET DMA overflow Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__) (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+ * @brief Set the DMA Receive status watchdog timer register value
+ * @param __HANDLE__: ETH Handle
+ * @param __VALUE__: DMA Receive status watchdog timer register value
+ * @retval None
+ */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__) ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/**
+ * @brief Enables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Disables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Enables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Disables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Magic Packet Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+ * @brief Disables the MAC Magic Packet Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Power Down.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Disables the MAC Power Down.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Checks whether the specified ETHERNET PMT flag is set or not.
+ * @param __HANDLE__: ETH Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset
+ * @arg ETH_PMT_FLAG_WUFR : Wake-Up Frame Received
+ * @arg ETH_PMT_FLAG_MPR : Magic Packet Received
+ * @retval The new state of ETHERNET PMT Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__) do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+ (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0)
+
+/**
+ * @brief Enables the MMC Counter Freeze.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+ * @brief Disables the MMC Counter Freeze.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+ * @brief Enables the MMC Reset On Read.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+ * @brief Disables the MMC Reset On Read.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+ * @brief Enables the MMC Counter Stop Rollover.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+ * @brief Disables the MMC Counter Stop Rollover.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+ * @brief Resets the MMC Counters.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+ * @brief Enables the specified ETHERNET MMC Rx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Disables the specified ETHERNET MMC Rx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Enables the specified ETHERNET MMC Tx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET MMC Tx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP
+ * @{
+ */
+#define ETH_EXTI_LINE_WAKEUP ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Enables the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_ENABLE_IT() EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_DISABLE_IT() EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Get flag of the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_GET_FLAG() EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Clear flag of the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_CLEAR_FLAG() EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Sets rising edge trigger to the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @brief Sets falling edge trigger to the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Sets rising/falling edge trigger to the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+
+/* IO operation functions ****************************************************/
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+
+ /* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+
+/* Cmmunication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+
+/* Peripheral State functions ************************************************/
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_ETH_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_flash.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,363 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FLASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_H
+#define __STM32F4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief FLASH Error structure definition
+ */
+typedef enum
+{
+ FLASH_ERROR_RD = 0x01,
+ FLASH_ERROR_PGS = 0x02,
+ FLASH_ERROR_PGP = 0x04,
+ FLASH_ERROR_PGA = 0x08,
+ FLASH_ERROR_WRP = 0x10,
+ FLASH_ERROR_OPERATION = 0x20
+}FLASH_ErrorTypeDef;
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_SECTERASE,
+ FLASH_PROC_MASSERASE,
+ FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+
+ __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
+
+ __IO uint8_t VoltageForErase; /*Internal variable to provide voltange range selected by user in IT context*/
+
+ __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
+
+ __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
+
+ __IO uint32_t Address; /*Internal variable to save address selected for program*/
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
+
+}FLASH_ProcessTypeDef;
+
+/**
+ * @brief FLASH Error source
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */
+#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */
+#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */
+#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */
+
+#define IS_TYPEPROGRAM(VALUE)(((VALUE) == TYPEPROGRAM_BYTE) || \
+ ((VALUE) == TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == TYPEPROGRAM_WORD) || \
+ ((VALUE) == TYPEPROGRAM_DOUBLEWORD))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
+#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
+#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
+#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+ * @{
+ */
+#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
+#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
+#define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
+#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
+#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Keys FLASH Keys
+ * @{
+ */
+#define RDP_KEY ((uint16_t)0x00A5)
+#define FLASH_KEY1 ((uint32_t)0x45670123)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
+#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
+/**
+ * @}
+ */
+
+/**
+ * @brief ACR register byte 0 (Bits[7:0]) base address
+ */
+#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+/**
+ * @brief OPTCR register byte 0 (Bits[7:0]) base address
+ */
+#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
+/**
+ * @brief OPTCR register byte 1 (Bits[15:8]) base address
+ */
+#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
+/**
+ * @brief OPTCR register byte 2 (Bits[23:16]) base address
+ */
+#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
+/**
+ * @brief OPTCR register byte 3 (Bits[31:24]) base address
+ */
+#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval none
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+ * @brief Enable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
+
+/**
+ * @brief Disable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
+
+/**
+ * @brief Enable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
+
+/**
+ * @brief Disable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
+
+/**
+ * @brief Resets the FLASH instruction Cache.
+ * @note This function must be used only when the Instruction Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_ICRST)
+
+/**
+ * @brief Resets the FLASH data Cache.
+ * @note This function must be used only when the data Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_DATA_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_DCRST)
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+
+/* Include FLASH HAL Extension module */
+#include "stm32f4xx_hal_flash_ex.h"
+#include "stm32f4xx_hal_flash_ramfunc.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Program operation functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/* Peripheral State functions ************************************************/
+FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_flash_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,759 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FLASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_EX_H
+#define __STM32F4xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< Mass erase or sector Erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+ uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Sectors */
+
+ uint32_t NbSectors; /*!< Number of sectors to be erased.
+ This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+
+ uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+ This parameter must be a value of @ref FLASHEx_Voltage_Range */
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Option Bytes Program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_Option_Type */
+
+ uint32_t WRPState; /*!< Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_WRP_State */
+
+ uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
+ The value of this parameter depend on device used within the same series */
+
+ uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint32_t RDPLevel; /*!< Set the read protection level.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+
+ uint32_t BORLevel; /*!< Set the BOR Level.
+ This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+
+ uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Advanced Option Bytes Program structure definition
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured for extension.
+ This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */
+
+ uint32_t PCROPState; /*!< PCROP activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_PCROP_State */
+
+#if defined (STM32F401xC) || defined (STM32F401xE) || defined (STM32F411xE)
+ uint16_t Sectors; /*!< specifies the sector(s) set for PCROP.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+ uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
+ This parameter can be a value of @ref FLASHEx_Dual_Boot */
+
+#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+} FLASH_AdvOBProgramInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define TYPEERASE_SECTORS ((uint32_t)0x00) /*!< Sectors erase only */
+#define TYPEERASE_MASSERASE ((uint32_t)0x01) /*!< Flash Mass erase activation */
+
+#define IS_TYPEERASE(VALUE)(((VALUE) == TYPEERASE_SECTORS) || \
+ ((VALUE) == TYPEERASE_MASSERASE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
+ * @{
+ */
+#define VOLTAGE_RANGE_1 ((uint32_t)0x00) /*!< Device operating range: 1.8V to 2.1V */
+#define VOLTAGE_RANGE_2 ((uint32_t)0x01) /*!< Device operating range: 2.1V to 2.7V */
+#define VOLTAGE_RANGE_3 ((uint32_t)0x02) /*!< Device operating range: 2.7V to 3.6V */
+#define VOLTAGE_RANGE_4 ((uint32_t)0x03) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
+
+#define IS_VOLTAGERANGE(RANGE)(((RANGE) == VOLTAGE_RANGE_1) || \
+ ((RANGE) == VOLTAGE_RANGE_2) || \
+ ((RANGE) == VOLTAGE_RANGE_3) || \
+ ((RANGE) == VOLTAGE_RANGE_4))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_WRP_State FLASH WRP State
+ * @{
+ */
+#define WRPSTATE_DISABLE ((uint32_t)0x00) /*!< Disable the write protection of the desired bank 1 sectors */
+#define WRPSTATE_ENABLE ((uint32_t)0x01) /*!< Enable the write protection of the desired bank 1 sectors */
+
+#define IS_WRPSTATE(VALUE)(((VALUE) == WRPSTATE_DISABLE) || \
+ ((VALUE) == WRPSTATE_ENABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Type FLASH Option Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!< WRP option byte configuration */
+#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!< RDP option byte configuration */
+#define OPTIONBYTE_USER ((uint32_t)0x04) /*!< USER option byte configuration */
+#define OPTIONBYTE_BOR ((uint32_t)0x08) /*!< BOR option byte configuration */
+
+#define IS_OPTIONBYTE(VALUE)(((VALUE) < (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR)))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1 ((uint8_t)0x55)
+/*#define OB_RDP_LEVEL_2 ((uint8_t)0xCC)*/ /*!< Warning: When enabling read protection level 2
+ it s no more possible to go back to level 1 or 0 */
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
+ * @{
+ */
+#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
+#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
+#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
+#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
+#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
+ ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/** @defgroup FLASHEx_PCROP_State FLASH PCROP State
+ * @{
+ */
+#define PCROPSTATE_DISABLE ((uint32_t)0x00) /*!< Disable PCROP */
+#define PCROPSTATE_ENABLE ((uint32_t)0x01) /*!< Enable PCROP */
+
+#define IS_PCROPSTATE(VALUE)(((VALUE) == PCROPSTATE_DISABLE) || \
+ ((VALUE) == PCROPSTATE_ENABLE))
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define OBEX_PCROP ((uint32_t)0x01) /*!< PCROP option byte configuration */
+#define OBEX_BOOTCONFIG ((uint32_t)0x02) /*!< BOOTConfig option byte configuration */
+
+#define IS_OBEX(VALUE)(((VALUE) == OBEX_PCROP) || \
+ ((VALUE) == OBEX_BOOTCONFIG))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define OBEX_PCROP ((uint32_t)0x01) /*!<PCROP option byte configuration */
+
+#define IS_OBEX(VALUE)(((VALUE) == OBEX_PCROP))
+
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+/*------------------------------------------- STM32F42xxx/STM32F43xxx------------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
+#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
+#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
+#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
+#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
+#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
+#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
+#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
+
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7) || \
+ ((LATENCY) == FLASH_LATENCY_8) || \
+ ((LATENCY) == FLASH_LATENCY_9) || \
+ ((LATENCY) == FLASH_LATENCY_10) || \
+ ((LATENCY) == FLASH_LATENCY_11) || \
+ ((LATENCY) == FLASH_LATENCY_12) || \
+ ((LATENCY) == FLASH_LATENCY_13) || \
+ ((LATENCY) == FLASH_LATENCY_14) || \
+ ((LATENCY) == FLASH_LATENCY_15))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx -----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Banks FLASH Banks
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */
+#define FLASH_BANK_2 ((uint32_t)2) /*!< Bank 2 */
+#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */
+
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
+ ((BANK) == FLASH_BANK_2) || \
+ ((BANK) == FLASH_BANK_BOTH))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */
+
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits here to clear */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER Bit */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Sectors FLASH Sectors
+ * @{
+ */
+/*------------------------------------------ STM32F42xxx/STM32F43xxx--------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+#define FLASH_SECTOR_8 ((uint32_t)8) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11) /*!< Sector Number 11 */
+#define FLASH_SECTOR_12 ((uint32_t)12) /*!< Sector Number 12 */
+#define FLASH_SECTOR_13 ((uint32_t)13) /*!< Sector Number 13 */
+#define FLASH_SECTOR_14 ((uint32_t)14) /*!< Sector Number 14 */
+#define FLASH_SECTOR_15 ((uint32_t)15) /*!< Sector Number 15 */
+#define FLASH_SECTOR_16 ((uint32_t)16) /*!< Sector Number 16 */
+#define FLASH_SECTOR_17 ((uint32_t)17) /*!< Sector Number 17 */
+#define FLASH_SECTOR_18 ((uint32_t)18) /*!< Sector Number 18 */
+#define FLASH_SECTOR_19 ((uint32_t)19) /*!< Sector Number 19 */
+#define FLASH_SECTOR_20 ((uint32_t)20) /*!< Sector Number 20 */
+#define FLASH_SECTOR_21 ((uint32_t)21) /*!< Sector Number 21 */
+#define FLASH_SECTOR_22 ((uint32_t)22) /*!< Sector Number 22 */
+#define FLASH_SECTOR_23 ((uint32_t)23) /*!< Sector Number 23 */
+
+#define FLASH_SECTOR_TOTAL 24
+
+#define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
+ ((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
+ ((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
+ ((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
+ ((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
+ ((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
+ ((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+#define FLASH_SECTOR_8 ((uint32_t)8) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11) /*!< Sector Number 11 */
+
+#define FLASH_SECTOR_TOTAL 12
+
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+
+#define FLASH_SECTOR_TOTAL 6
+
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5))
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F401xE/STM32F411xE -------------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+
+#define FLASH_SECTOR_TOTAL 8
+
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
+#endif /* STM32F401xE || STM32F411xE */
+/*-----------------------------------------------------------------------------------------------------*/
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < FLASH_END))
+#define IS_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+ * @{
+ */
+/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
+#define OB_WRP_SECTOR_12 ((uint32_t)0x00000001 << 12) /*!< Write protection of Sector12 */
+#define OB_WRP_SECTOR_13 ((uint32_t)0x00000002 << 12) /*!< Write protection of Sector13 */
+#define OB_WRP_SECTOR_14 ((uint32_t)0x00000004 << 12) /*!< Write protection of Sector14 */
+#define OB_WRP_SECTOR_15 ((uint32_t)0x00000008 << 12) /*!< Write protection of Sector15 */
+#define OB_WRP_SECTOR_16 ((uint32_t)0x00000010 << 12) /*!< Write protection of Sector16 */
+#define OB_WRP_SECTOR_17 ((uint32_t)0x00000020 << 12) /*!< Write protection of Sector17 */
+#define OB_WRP_SECTOR_18 ((uint32_t)0x00000040 << 12) /*!< Write protection of Sector18 */
+#define OB_WRP_SECTOR_19 ((uint32_t)0x00000080 << 12) /*!< Write protection of Sector19 */
+#define OB_WRP_SECTOR_20 ((uint32_t)0x00000100 << 12) /*!< Write protection of Sector20 */
+#define OB_WRP_SECTOR_21 ((uint32_t)0x00000200 << 12) /*!< Write protection of Sector21 */
+#define OB_WRP_SECTOR_22 ((uint32_t)0x00000400 << 12) /*!< Write protection of Sector22 */
+#define OB_WRP_SECTOR_23 ((uint32_t)0x00000800 << 12) /*!< Write protection of Sector23 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF << 12) /*!< Write protection of all Sectors */
+
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFF000000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F401xE/STM32F411xE -------------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xE || STM32F411xE */
+/*-----------------------------------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC ReadWrite Protection
+ * @{
+ */
+/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */
+#define OB_PCROP_SECTOR_8 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector8 */
+#define OB_PCROP_SECTOR_9 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector9 */
+#define OB_PCROP_SECTOR_10 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector10 */
+#define OB_PCROP_SECTOR_11 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector11 */
+#define OB_PCROP_SECTOR_12 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector12 */
+#define OB_PCROP_SECTOR_13 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector13 */
+#define OB_PCROP_SECTOR_14 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector14 */
+#define OB_PCROP_SECTOR_15 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector15 */
+#define OB_PCROP_SECTOR_16 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector16 */
+#define OB_PCROP_SECTOR_17 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector17 */
+#define OB_PCROP_SECTOR_18 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector18 */
+#define OB_PCROP_SECTOR_19 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector19 */
+#define OB_PCROP_SECTOR_20 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector20 */
+#define OB_PCROP_SECTOR_21 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector21 */
+#define OB_PCROP_SECTOR_22 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector22 */
+#define OB_PCROP_SECTOR_23 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector23 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F401xE/STM32F411xE -------------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xE || STM32F411xE */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Dual_Boot FLASH Dual Boot
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_DUAL_BOOT_ENABLE ((uint8_t)0x10) /*!< Dual Bank Boot Enable */
+#define OB_DUAL_BOOT_DISABLE ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */
+#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Selection_Protection_Mode FLASH Selection Protection Mode
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define OB_PCROP_DESELECTED ((uint8_t)0x00) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */
+#define OB_PCROP_SELECTED ((uint8_t)0x80) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i */
+#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/**
+ * @brief OPTCR1 register byte 2 (Bits[23:16]) base address
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OPTCR1_BYTE2_ADDRESS ((uint32_t)0x40023C1A)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Extension Program operation functions *************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void);
+HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_flash_ramfunc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,84 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ramfunc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FLASH RAMFUNC driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_FLASH_RAMFUNC_H
+#define __STM32F4xx_FLASH_RAMFUNC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F411xE)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH_RAMFUNC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void);
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void);
+
+#endif /* STM32F411xE */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_gpio.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,271 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_H
+#define __STM32F4xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_Alternat_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+
+/**
+ * @}
+ */
+/** @defgroup GPIO_speed_define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */
+#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
+#define GPIO_SPEED_FAST ((uint32_t)0x00000002) /*!< Fast speed */
+#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/* Include GPIO HAL Extension module */
+#include "stm32f4xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions *******************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/* IO operation functions *******************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_gpio_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,826 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_EX_H
+#define __STM32F4xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_Alternat_function_selection
+ * @{
+ */
+
+/*------------------------- STM32F429xx/STM32F439xx---------------------------*/
+#if defined (STM32F429xx) || defined (STM32F439xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF14_LTDC))
+
+#endif /* STM32F429xx || STM32F439xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx--------------------------------*/
+#if defined (STM32F427xx) || defined (STM32F437xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1))
+
+#endif /* STM32F427xx || STM32F437xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx--------------------------------*/
+#if defined (STM32F407xx) || defined (STM32F417xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F407xx || STM32F417xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx--------------------------------*/
+#if defined (STM32F405xx) || defined (STM32F415xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F405xx || STM32F415xx */
+
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx--------------------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
+
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F401xC || STM32F401xE */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F411xx--------------------------------------*/
+#if defined(STM32F411xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
+
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F411xE */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_hash.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,331 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of HASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_H
+#define __STM32F4xx_HAL_HASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HASH Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref HASH_Data_Type */
+
+ uint32_t KeySize; /*!< The key size is used only in HMAC operation */
+
+ uint8_t* pKey; /*!< The key is used only in HMAC operation */
+}HASH_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_HASH_STATE_RESET = 0x00, /*!< HASH not yet initialized or disabled */
+ HAL_HASH_STATE_READY = 0x01, /*!< HASH initialized and ready for use */
+ HAL_HASH_STATE_BUSY = 0x02, /*!< HASH internal process is ongoing */
+ HAL_HASH_STATE_TIMEOUT = 0x03, /*!< HASH timeout state */
+ HAL_HASH_STATE_ERROR = 0x04 /*!< HASH error state */
+}HAL_HASH_STATETypeDef;
+
+/**
+ * @brief HAL phase structures definition
+ */
+typedef enum
+{
+ HAL_HASH_PHASE_READY = 0x01, /*!< HASH peripheral is ready for initialization */
+ HAL_HASH_PHASE_PROCESS = 0x02, /*!< HASH peripheral is in processing phase */
+}HAL_HASHPhaseTypeDef;
+
+/**
+ * @brief HASH Handle Structure definition
+ */
+typedef struct
+{
+ HASH_InitTypeDef Init; /*!< HASH required parameters */
+
+ uint8_t *pHashInBuffPtr; /*!< Pointer to input buffer */
+
+ uint8_t *pHashOutBuffPtr; /*!< Pointer to input buffer */
+
+ __IO uint32_t HashBuffSize; /*!< Size of buffer to be processed */
+
+ __IO uint32_t HashInCount; /*!< Counter of inputed data */
+
+ __IO uint32_t HashITCounter; /*!< Counter of issued interrupts */
+
+ HAL_StatusTypeDef Status; /*!< HASH peripheral status */
+
+ HAL_HASHPhaseTypeDef Phase; /*!< HASH peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< HASH In DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< HASH locking object */
+
+ __IO HAL_HASH_STATETypeDef State; /*!< HASH peripheral state */
+} HASH_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HASH_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HASH_Algo_Selection
+ * @{
+ */
+#define HASH_AlgoSelection_SHA1 ((uint32_t)0x0000) /*!< HASH function is SHA1 */
+#define HASH_AlgoSelection_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */
+#define HASH_AlgoSelection_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */
+#define HASH_AlgoSelection_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */
+
+#define IS_HASH_ALGOSELECTION(ALGOSELECTION) (((ALGOSELECTION) == HASH_AlgoSelection_SHA1) || \
+ ((ALGOSELECTION) == HASH_AlgoSelection_SHA224) || \
+ ((ALGOSELECTION) == HASH_AlgoSelection_SHA256) || \
+ ((ALGOSELECTION) == HASH_AlgoSelection_MD5))
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Algorithm_Mode
+ * @{
+ */
+#define HASH_AlgoMode_HASH ((uint32_t)0x00000000) /*!< Algorithm is HASH */
+#define HASH_AlgoMode_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */
+
+#define IS_HASH_ALGOMODE(ALGOMODE) (((ALGOMODE) == HASH_AlgoMode_HASH) || \
+ ((ALGOMODE) == HASH_AlgoMode_HMAC))
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Data_Type
+ * @{
+ */
+#define HASH_DATATYPE_32B ((uint32_t)0x0000) /*!< 32-bit data. No swapping */
+#define HASH_DATATYPE_16B HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */
+#define HASH_DATATYPE_8B HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */
+#define HASH_DATATYPE_1B HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */
+
+#define IS_HASH_DATATYPE(DATATYPE) (((DATATYPE) == HASH_DATATYPE_32B)|| \
+ ((DATATYPE) == HASH_DATATYPE_16B)|| \
+ ((DATATYPE) == HASH_DATATYPE_8B) || \
+ ((DATATYPE) == HASH_DATATYPE_1B))
+/**
+ * @}
+ */
+
+/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode
+ * @{
+ */
+#define HASH_HMACKeyType_ShortKey ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */
+#define HASH_HMACKeyType_LongKey HASH_CR_LKEY /*!< HMAC Key is > 64 bytes */
+
+#define IS_HASH_HMAC_KEYTYPE(KEYTYPE) (((KEYTYPE) == HASH_HMACKeyType_ShortKey) || \
+ ((KEYTYPE) == HASH_HMACKeyType_LongKey))
+/**
+ * @}
+ */
+
+/** @defgroup HASH_flags_definition
+ * @{
+ */
+#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
+#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */
+#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
+#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy : processing a block of data */
+#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : The input buffer contains at least one word of data */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_interrupts_definition
+ * @{
+ */
+#define HASH_IT_DINI HASH_IMR_DINIM /*!< A new block can be entered into the input buffer (DIN) */
+#define HASH_IT_DCI HASH_IMR_DCIM /*!< Digest calculation complete */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset HASH handle state
+ * @param __HANDLE__: specifies the HASH handle.
+ * @retval None
+ */
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
+
+/** @brief Check whether the specified HASH flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg HASH_FLAG_DINIS: A new block can be entered into the input buffer.
+ * @arg HASH_FLAG_DCIS: Digest calculation complete
+ * @arg HASH_FLAG_DMAS: DMA interface is enabled (DMAE=1) or a transfer is ongoing
+ * @arg HASH_FLAG_BUSY: The hash core is Busy : processing a block of data
+ * @arg HASH_FLAG_DINNE: DIN not empty : The input buffer contains at least one word of data
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_HASH_GET_FLAG(__FLAG__) ((HASH->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Macros for HMAC finish.
+ * @param None
+ * @retval None
+ */
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/**
+ * @brief Enable the multiple DMA mode.
+ * This feature is available only in STM32F429x and STM32F439x devices.
+ * @param None
+ * @retval None
+ */
+#define __HAL_HASH_SET_MDMAT() HASH->CR |= HASH_CR_MDMAT
+
+/**
+ * @brief Disable the multiple DMA mode.
+ * @param None
+ * @retval None
+ */
+#define __HAL_HASH_RESET_MDMAT() HASH->CR &= (uint32_t)(~HASH_CR_MDMAT)
+
+/**
+ * @brief Start the digest computation
+ * @param None
+ * @retval None
+ */
+#define __HAL_HASH_START_DIGEST() HASH->STR |= HASH_STR_DCAL
+
+/**
+ * @brief Set the number of valid bits in last word written in Data register
+ * @param SIZE: size in byte of last data written in Data register.
+ * @retval None
+*/
+#define __HAL_HASH_SET_NBVALIDBITS(SIZE) do{HASH->STR &= ~(HASH_STR_NBW);\
+ HASH->STR |= 8 * ((SIZE) % 4);\
+ }while(0)
+
+/* Include HASH HAL Extension module */
+#include "stm32f4xx_hal_hash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
+
+/* HASH processing using polling *********************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/* HASH-MAC processing using polling *****************************************/
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/* HASH processing using interrupt *******************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/* HASH processing using DMA *************************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/* HASH-HMAC processing using DMA ********************************************/
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/* Processing functions ******************************************************/
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
+
+/* Peripheral State functions ************************************************/
+HAL_HASH_STATETypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_HASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_hash_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,105 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of HASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_EX_H
+#define __STM32F4xx_HAL_HASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* HASH processing using polling *********************************************/
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/* HASH-MAC processing using polling *****************************************/
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/* HASH processing using interrupt *******************************************/
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/* HASH processing using DMA *************************************************/
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/* HASH-HMAC processing using DMA ********************************************/
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/* Processing functions ******************************************************/
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash);
+
+#endif /* STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_hcd.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,224 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hcd.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of HCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HCD_H
+#define __STM32F4xx_HAL_HCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+ /**
+ * @brief HCD Status structures structure definition
+ */
+typedef enum
+{
+ HAL_HCD_STATE_RESET = 0x00,
+ HAL_HCD_STATE_READY = 0x01,
+ HAL_HCD_STATE_ERROR = 0x02,
+ HAL_HCD_STATE_BUSY = 0x03,
+ HAL_HCD_STATE_TIMEOUT = 0x04
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef HCD_HCTypeDef ;
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ;
+typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef ;
+
+/**
+ * @brief HCD Handle Structure definition
+ */
+typedef struct
+{
+ HCD_TypeDef *Instance; /*!< Register base address */
+ HCD_InitTypeDef Init; /*!< HCD required parameters */
+ HCD_HCTypeDef hc[15]; /*!< Host channels parameters */
+ HAL_LockTypeDef Lock; /*!< HCD peripheral status */
+ __IO HCD_StateTypeDef State; /*!< HCD communication state */
+ void *pData; /*!< Pointer Stack Handler */
+
+} HCD_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HCD_Instance_definition
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+ ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Speed
+ * @{
+ */
+#define HCD_SPEED_HIGH 0
+#define HCD_SPEED_LOW 2
+#define HCD_SPEED_FULL 3
+
+/**
+ * @}
+ */
+
+ /** @defgroup HCD_PHY_Module
+ * @{
+ */
+#define HCD_PHY_ULPI 1
+#define HCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup HCD_Interrupt_Clock
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_HCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_DeInit (HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num);
+
+void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+ uint8_t pipe,
+ uint8_t direction ,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping);
+
+ /* Non-Blocking mode: Interrupt */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd,
+ uint8_t chnum,
+ HCD_URBStateTypeDef urb_state);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+
+/* Peripheral State functions **************************************************/
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_i2c.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,461 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_H
+#define __STM32F4xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief I2C Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency.
+ This parameter must be set to a value lower than 400kHz */
+
+ uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
+ This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */
+ HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_TX = 0x32, /*!< Memory Data Transmission process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_RX = 0x42, /*!< Memory Data Reception process is ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0x03, /*!< I2C timeout state */
+ HAL_I2C_STATE_ERROR = 0x04 /*!< I2C error state */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @brief HAL I2C Error Code structure definition
+ */
+typedef enum
+{
+ HAL_I2C_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2C_ERROR_BERR = 0x01, /*!< BERR error */
+ HAL_I2C_ERROR_ARLO = 0x02, /*!< ARLO error */
+ HAL_I2C_ERROR_AF = 0x04, /*!< AF error */
+ HAL_I2C_ERROR_OVR = 0x08, /*!< OVR error */
+ HAL_I2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_I2C_ERROR_TIMEOUT = 0x20 /*!< Timeout error */
+
+}HAL_I2C_ErrorTypeDef;
+
+/**
+ * @brief I2C handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ErrorTypeDef ErrorCode; /* I2C Error code */
+
+}I2C_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants
+ * @{
+ */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode
+ * @{
+ */
+#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000)
+#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
+
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
+ ((CYCLE) == I2C_DUTYCYCLE_16_9))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_addressing_mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000)
+#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000))
+
+#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLED I2C_OAR2_ENDUAL
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLED I2C_CR1_ENGC
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLED) || \
+ ((CALL) == I2C_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010)
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition
+ * @{
+ */
+#define I2C_IT_BUF I2C_CR2_ITBUFEN
+#define I2C_IT_EVT I2C_CR2_ITEVTEN
+#define I2C_IT_ERR I2C_CR2_ITERREN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition
+ * @{
+ */
+#define I2C_FLAG_SMBALERT ((uint32_t)0x00018000)
+#define I2C_FLAG_TIMEOUT ((uint32_t)0x00014000)
+#define I2C_FLAG_PECERR ((uint32_t)0x00011000)
+#define I2C_FLAG_OVR ((uint32_t)0x00010800)
+#define I2C_FLAG_AF ((uint32_t)0x00010400)
+#define I2C_FLAG_ARLO ((uint32_t)0x00010200)
+#define I2C_FLAG_BERR ((uint32_t)0x00010100)
+#define I2C_FLAG_TXE ((uint32_t)0x00010080)
+#define I2C_FLAG_RXNE ((uint32_t)0x00010040)
+#define I2C_FLAG_STOPF ((uint32_t)0x00010010)
+#define I2C_FLAG_ADD10 ((uint32_t)0x00010008)
+#define I2C_FLAG_BTF ((uint32_t)0x00010004)
+#define I2C_FLAG_ADDR ((uint32_t)0x00010002)
+#define I2C_FLAG_SB ((uint32_t)0x00010001)
+#define I2C_FLAG_DUALF ((uint32_t)0x00100080)
+#define I2C_FLAG_SMBHOST ((uint32_t)0x00100040)
+#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00100020)
+#define I2C_FLAG_GENCALL ((uint32_t)0x00100010)
+#define I2C_FLAG_TRA ((uint32_t)0x00100004)
+#define I2C_FLAG_BUSY ((uint32_t)0x00100002)
+#define I2C_FLAG_MSL ((uint32_t)0x00100001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable or disable the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @arg I2C_FLAG_TXE: Data register empty flag
+ * @arg I2C_FLAG_RXNE: Data register not empty flag
+ * @arg I2C_FLAG_STOPF: Stop detection flag
+ * @arg I2C_FLAG_ADD10: 10-bit header sent flag
+ * @arg I2C_FLAG_BTF: Byte transfer finished flag
+ * @arg I2C_FLAG_ADDR: Address sent flag
+ * Address matched flag
+ * @arg I2C_FLAG_SB: Start bit flag
+ * @arg I2C_FLAG_DUALF: Dual flag
+ * @arg I2C_FLAG_SMBHOST: SMBus host header
+ * @arg I2C_FLAG_SMBDEFAULT: SMBus default header
+ * @arg I2C_FLAG_GENCALL: General call header flag
+ * @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+ * @arg I2C_FLAG_BUSY: Bus busy flag
+ * @arg I2C_FLAG_MSL: Master/Slave flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define I2C_FLAG_MASK ((uint32_t)0x0000FFFF)
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16)) == 0x01)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \
+ ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
+
+/** @brief Clears the I2C ADDR pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+
+#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR1;\
+ (__HANDLE__)->Instance->SR2;}while(0)
+
+/** @brief Clears the I2C STOPF pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR1;\
+ (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE;}while(0)
+
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000)
+#define __HAL_I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000) ? ((__FREQRANGE__) + 1) : ((((__FREQRANGE__) * 300) / 1000) + 1))
+#define __HAL_I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1)) & I2C_CCR_CCR) < 4)? 4:((__PCLK__) / ((__SPEED__) << 1)))
+#define __HAL_I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3)) : (((__PCLK__) / ((__SPEED__) * 25)) | I2C_DUTYCYCLE_16_9))
+#define __HAL_I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000)? (__HAL_I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
+ ((__HAL_I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0)? 1 : \
+ ((__HAL_I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
+
+#define __HAL_I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0)))
+#define __HAL_I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
+
+#define __HAL_I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+#define __HAL_I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0))))
+#define __HAL_I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1))))
+
+#define __HAL_I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define __HAL_I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000))
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00)) == 0)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01)) == 0)
+
+/* Include I2C HAL Extension module */
+#include "stm32f4xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/* I/O operation functions *****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+
+/* Peripheral Control and State functions **************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_i2c_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,112 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of I2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_EX_H
+#define __STM32F4xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLED I2C_FLTR_ANOFF
+
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_Digital_Filter
+ * @{
+ */
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC || STM32F401xE */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_i2s.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,445 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_H
+#define __STM32F4xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
+ This parameter can be a value of @ref I2S_Clock_Source */
+
+ uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode.
+ This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x03, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x04 /*!< I2S error state */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief HAL I2S Error Code structure definition
+ */
+typedef enum
+{
+ HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2S_ERROR_UDR = 0x01, /*!< I2S Underrun error */
+ HAL_I2S_ERROR_OVR = 0x02, /*!< I2S Overrun error */
+ HAL_I2SEX_ERROR_UDR = 0x04, /*!< I2S extended Underrun error */
+ HAL_I2SEX_ERROR_OVR = 0x08, /*!< I2S extended Overrun error */
+ HAL_I2S_ERROR_FRE = 0x10, /*!< I2S Frame format error */
+ HAL_I2S_ERROR_DMA = 0x20 /*!< DMA transfer error */
+}HAL_I2S_ErrorTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /* I2S registers base address */
+
+ I2S_InitTypeDef Init; /* I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* I2S Rx transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+
+ __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
+
+}I2S_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2S_Exported_Constants
+ * @{
+ */
+#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
+
+/** @defgroup I2S_Clock_Source
+ * @{
+ */
+#define I2S_CLOCK_PLL ((uint32_t)0x00000000)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001)
+
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
+ ((CLOCK) == I2S_CLOCK_PLL))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX) || \
+ ((MODE) == I2S_MODE_MASTER_RX))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0)
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+/** @defgroup I2S_Legacy
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005)
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_FullDuplex_Mode
+ * @{
+ */
+#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000)
+#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001)
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+ ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupt_configuration_definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flag_definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+
+/* Include I2S Extension module */
+#include "stm32f4xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+
+/* I/O operation functions *****************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Peripheral Control and State functions **************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+
+void I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMAError(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_i2s_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,86 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_EX_H
+#define __STM32F4xx_HAL_I2S_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2SEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Extended features functions **************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_irda.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,443 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IRDA_H
+#define __STM32F4xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDA_Word_Length */
+
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler */
+
+ uint32_t IrDAMode; /*!< Specifies the IrDA mode
+ This parameter can be a value of @ref IrDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief HAL IRDA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
+ HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
+ HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_IRDA_ErrorTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ IRDA_InitTypeDef Init; /* IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+
+ __IO HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
+
+}IRDA_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IRDA_Word_Length
+ * @{
+ */
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint32_t)0x00000000)
+#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+/**
+ * @}
+ */
+
+/** @defgroup IrDA_Low_Power
+ * @{
+ */
+#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP)
+#define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000)
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
+#define IRDA_FLAG_IDLE ((uint32_t)0x00000010)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+
+#define IRDA_IT_PE ((uint32_t)0x10000100)
+#define IRDA_IT_TXE ((uint32_t)0x10000080)
+#define IRDA_IT_TC ((uint32_t)0x10000040)
+#define IRDA_IT_RXNE ((uint32_t)0x10000020)
+#define IRDA_IT_IDLE ((uint32_t)0x10000010)
+
+#define IRDA_IT_LBD ((uint32_t)0x20000040)
+
+#define IRDA_IT_CTS ((uint32_t)0x30000400)
+#define IRDA_IT_ERR ((uint32_t)0x30000001)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset IRDA handle state
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief Flushs the IRDA DR register
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified IRDA pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg IRDA_FLAG_TC: Transmission Complete flag.
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the IRDA PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->DR;}while(0)
+/** @brief Clear the IRDA FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified IRDA interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define IRDA_IT_MASK ((uint32_t)0x0000FFFF)
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK)))
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK)))
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK))
+
+
+
+#define __IRDA_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __IRDA_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+#define __DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define __DIVMANT(_PCLK_, _BAUD_) (__DIV((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ(_PCLK_, _BAUD_) (((__DIV((_PCLK_), (_BAUD_)) - (__DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __IRDA_BRR(_PCLK_, _BAUD_) ((__DIVMANT((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201)
+
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+
+/* Peripheral State functions **************************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_iwdg.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,248 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IWDG_H
+#define __STM32F4xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief IWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */
+ HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */
+ HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */
+ HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */
+ HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */
+
+}HAL_IWDG_StateTypeDef;
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+}IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< IWDG locking object */
+
+ __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */
+
+}IWDG_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Registers_BitMask
+ * @{
+ */
+/* --- KR Register ---*/
+/* KR register bit mask */
+#define KR_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG reload counter enable */
+#define KR_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG peripheral enable */
+#define KR_KEY_EWA ((uint32_t)0x5555) /*!< IWDG KR write Access enable */
+#define KR_KEY_DWA ((uint32_t)0x0000) /*!< IWDG KR write Access disable */
+
+#define IS_IWDG_KR(__KR__) (((__KR__) == KR_KEY_RELOAD) || \
+ ((__KR__) == KR_KEY_ENABLE))|| \
+ ((__KR__) == KR_KEY_EWA)) || \
+ ((__KR__) == KR_KEY_DWA))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag_definition
+ * @{
+ */
+#define IWDG_FLAG_PVU ((uint32_t)0x0001) /*!< Watchdog counter prescaler value update flag */
+#define IWDG_FLAG_RVU ((uint32_t)0x0002) /*!< Watchdog counter reload value update flag */
+
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || \
+ ((FLAG) == IWDG_FLAG_RVU))
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 ((uint8_t)(IWDG_PR_PR_0)) /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 ((uint8_t)(IWDG_PR_PR_1)) /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 ((uint8_t)(IWDG_PR_PR_2)) /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1)) /*!< IWDG prescaler set to 256 */
+
+
+#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_PRESCALER_4) || \
+ ((PRESCALER) == IWDG_PRESCALER_8) || \
+ ((PRESCALER) == IWDG_PRESCALER_16) || \
+ ((PRESCALER) == IWDG_PRESCALER_32) || \
+ ((PRESCALER) == IWDG_PRESCALER_64) || \
+ ((PRESCALER) == IWDG_PRESCALER_128)|| \
+ ((PRESCALER) == IWDG_PRESCALER_256))
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Reload_Value
+ * @{
+ */
+#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset IWDG handle state
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+ * @brief Enables the IWDG peripheral.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_ENABLE)
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_RELOAD)
+
+/**
+ * @brief Enables write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_EWA)
+
+/**
+ * @brief Disables write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_DWA)
+
+/**
+ * @brief Gets the selected IWDG's flag status.
+ * @param __HANDLE__: IWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag
+ * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+
+/* Peripheral State functions ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_ltdc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,582 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of LTDC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LTDC_H
+#define __STM32F4xx_HAL_LTDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup LTDC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+#define MAX_LAYER 2
+
+/**
+ * @brief LTDC color structure definition
+ */
+typedef struct
+{
+ uint8_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Reserved; /*!< Reserved 0xFF */
+} LTDC_ColorTypeDef;
+
+/**
+ * @brief LTDC Init structure definition
+ */
+typedef struct
+{
+ uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity.
+ This parameter can be one value of @ref LTDC_HS_POLARITY */
+
+ uint32_t VSPolarity; /*!< configures the vertical synchronization polarity.
+ This parameter can be one value of @ref LTDC_VS_POLARITY */
+
+ uint32_t DEPolarity; /*!< configures the data enable polarity.
+ This parameter can be one of value of @ref LTDC_DE_POLARITY */
+
+ uint32_t PCPolarity; /*!< configures the pixel clock polarity.
+ This parameter can be one of value of @ref LTDC_PC_POLARITY */
+
+ uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t VerticalSync; /*!< configures the number of Vertical synchronization heigh.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width.
+ This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch heigh.
+ This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedActiveW; /*!< configures the accumulated active width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedActiveH; /*!< configures the accumulated active heigh.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
+
+ uint32_t TotalWidth; /*!< configures the total width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
+
+ uint32_t TotalHeigh; /*!< configures the total heigh.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */
+} LTDC_InitTypeDef;
+
+
+/**
+ * @brief LTDC Layer structure definition
+ */
+typedef struct
+{
+ uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowY0; /*!< Configures the Window vertical Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowY1; /*!< Configures the Window vertical Stop Position.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t PixelFormat; /*!< Specifies the pixel format.
+ This parameter can be one of value of @ref LTDC_Pixelformat */
+
+ uint32_t Alpha; /*!< Specifies the constant alpha used for blending.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Alpha0; /*!< Configures the default alpha value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t BlendingFactor1; /*!< Select the blending factor 1.
+ This parameter can be one of value of @ref LTDC_BlendingFactor1 */
+
+ uint32_t BlendingFactor2; /*!< Select the blending factor 2.
+ This parameter can be one of value of @ref LTDC_BlendingFactor2 */
+
+ uint32_t FBStartAdress; /*!< Configures the color frame buffer address */
+
+ uint32_t ImageWidth; /*!< Configures the color frame buffer line length.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x1FFF. */
+
+ uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */
+} LTDC_LayerCfgTypeDef;
+
+/**
+ * @brief HAL LTDC State structures definition
+ */
+typedef enum
+{
+ HAL_LTDC_STATE_RESET = 0x00, /*!< LTDC not yet initialized or disabled */
+ HAL_LTDC_STATE_READY = 0x01, /*!< LTDC initialized and ready for use */
+ HAL_LTDC_STATE_BUSY = 0x02, /*!< LTDC internal process is ongoing */
+ HAL_LTDC_STATE_TIMEOUT = 0x03, /*!< LTDC Timeout state */
+ HAL_LTDC_STATE_ERROR = 0x04 /*!< LTDC state error */
+}HAL_LTDC_StateTypeDef;
+
+/**
+ * @brief LTDC handle Structure definition
+ */
+typedef struct
+{
+ LTDC_TypeDef *Instance; /*!< LTDC Register base address */
+
+ LTDC_InitTypeDef Init; /*!< LTDC parameters */
+
+ LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< LTDC Lock */
+
+ __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */
+
+ __IO uint32_t ErrorCode; /*!< LTDC Error code */
+
+} LTDC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup LTDC_Layer
+ * @{
+ */
+#define IS_LTDC_LAYER(LAYER) ((LAYER) <= MAX_LAYER)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC Error Code
+ * @{
+ */
+#define HAL_LTDC_ERROR_NONE ((uint32_t)0x00000000) /*!< LTDC No error */
+#define HAL_LTDC_ERROR_TE ((uint32_t)0x00000001) /*!< LTDC Transfer error */
+#define HAL_LTDC_ERROR_FU ((uint32_t)0x00000002) /*!< LTDC FIFO Underrun */
+#define HAL_LTDC_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< LTDC Timeout error */
+
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_HS_POLARITY
+ * @{
+ */
+#define LTDC_HSPOLARITY_AL ((uint32_t)0x00000000) /*!< Horizontal Synchronization is active low. */
+#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */
+
+#define IS_LTDC_HSPOL(HSPOL) (((HSPOL) == LTDC_HSPOLARITY_AL) || \
+ ((HSPOL) == LTDC_HSPOLARITY_AH))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_VS_POLARITY
+ * @{
+ */
+#define LTDC_VSPOLARITY_AL ((uint32_t)0x00000000) /*!< Vertical Synchronization is active low. */
+#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */
+
+#define IS_LTDC_VSPOL(VSPOL) (((VSPOL) == LTDC_VSPOLARITY_AL) || \
+ ((VSPOL) == LTDC_VSPOLARITY_AH))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_DE_POLARITY
+ * @{
+ */
+#define LTDC_DEPOLARITY_AL ((uint32_t)0x00000000) /*!< Data Enable, is active low. */
+#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */
+
+#define IS_LTDC_DEPOL(DEPOL) (((DEPOL) == LTDC_DEPOLARITY_AL) || \
+ ((DEPOL) == LTDC_DEPOLARITY_AH))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_PC_POLARITY
+ * @{
+ */
+#define LTDC_PCPOLARITY_IPC ((uint32_t)0x00000000) /*!< input pixel clock. */
+#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */
+
+#define IS_LTDC_PCPOL(PCPOL) (((PCPOL) == LTDC_PCPOLARITY_IPC) || \
+ ((PCPOL) == LTDC_PCPOLARITY_IIPC))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_SYNC
+ * @{
+ */
+#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16) /*!< Horizontal synchronization width. */
+#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization heigh. */
+
+#define IS_LTDC_HSYNC(HSYNC) ((HSYNC) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_VSYNC(VSYNC) ((VSYNC) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AHBP(AHBP) ((AHBP) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AVBP(AVBP) ((AVBP) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AAW(AAW) ((AAW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AAH(AAH) ((AAH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_TOTALW(TOTALW) ((TOTALW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_TOTALH(TOTALH) ((TOTALH) <= LTDC_VERTICALSYNC)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BACK_COLOR
+ * @{
+ */
+#define LTDC_COLOR ((uint32_t)0x000000FF) /*!< Color mask */
+
+#define IS_LTDC_BLUEVALUE(BBLUE) ((BBLUE) <= LTDC_COLOR)
+#define IS_LTDC_GREENVALUE(BGREEN) ((BGREEN) <= LTDC_COLOR)
+#define IS_LTDC_REDVALUE(BRED) ((BRED) <= LTDC_COLOR)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor1
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR1_CA ((uint32_t)0x00000400) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR1_PAxCA ((uint32_t)0x00000600) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+
+#define IS_LTDC_BLENDING_FACTOR1(BlendingFactor1) (((BlendingFactor1) == LTDC_BLENDING_FACTOR1_CA) || \
+ ((BlendingFactor1) == LTDC_BLENDING_FACTOR1_PAxCA))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor2
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR2_CA ((uint32_t)0x00000005) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR2_PAxCA ((uint32_t)0x00000007) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+
+#define IS_LTDC_BLENDING_FACTOR2(BlendingFactor2) (((BlendingFactor2) == LTDC_BLENDING_FACTOR2_CA) || \
+ ((BlendingFactor2) == LTDC_BLENDING_FACTOR2_PAxCA))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Pixelformat
+ * @{
+ */
+#define LTDC_PIXEL_FORMAT_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB888 ((uint32_t)0x00000001) /*!< RGB888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB565 ((uint32_t)0x00000002) /*!< RGB565 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_L8 ((uint32_t)0x00000005) /*!< L8 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL44 ((uint32_t)0x00000006) /*!< AL44 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL88 ((uint32_t)0x00000007) /*!< AL88 LTDC pixel format */
+
+#define IS_LTDC_PIXEL_FORMAT(Pixelformat) (((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB8888) || ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB888) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB565) || ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB4444) || ((Pixelformat) == LTDC_PIXEL_FORMAT_L8) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_AL44) || ((Pixelformat) == LTDC_PIXEL_FORMAT_AL88))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Alpha
+ * @{
+ */
+#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Cte Alpha mask */
+
+#define IS_LTDC_ALPHA(ALPHA) ((ALPHA) <= LTDC_ALPHA)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_LAYER_Config
+ * @{
+ */
+#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16) /*!< LTDC Layer stop position */
+#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */
+
+#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */
+#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */
+
+#define IS_LTDC_HCONFIGST(HCONFIGST) ((HCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_HCONFIGSP(HCONFIGSP) ((HCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_VCONFIGST(VCONFIGST) ((VCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_VCONFIGSP(VCONFIGSP) ((VCONFIGSP) <= LTDC_STOPPOSITION)
+
+#define IS_LTDC_CFBP(CFBP) ((CFBP) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLL(CFBLL) ((CFBLL) <= LTDC_COLOR_FRAME_BUFFER)
+
+#define IS_LTDC_CFBLNBR(CFBLNBR) ((CFBLNBR) <= LTDC_LINE_NUMBER)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_LIPosition
+ * @{
+ */
+#define IS_LTDC_LIPOS(LIPOS) ((LIPOS) <= 0x7FF)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Interrupts
+ * @{
+ */
+#define LTDC_IT_LI LTDC_IER_LIE
+#define LTDC_IT_FU LTDC_IER_FUIE
+#define LTDC_IT_TE LTDC_IER_TERRIE
+#define LTDC_IT_RR LTDC_IER_RRIE
+
+#define IS_LTDC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFF0) == 0x00) && ((IT) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Flag
+ * @{
+ */
+#define LTDC_FLAG_LI LTDC_ISR_LIF
+#define LTDC_FLAG_FU LTDC_ISR_FUIF
+#define LTDC_FLAG_TE LTDC_ISR_TERRIF
+#define LTDC_FLAG_RR LTDC_ISR_RRIF
+
+#define IS_LTDC_FLAG(FLAG) (((FLAG) == LTDC_FLAG_LI) || ((FLAG) == LTDC_FLAG_FU) || \
+ ((FLAG) == LTDC_FLAG_TERR) || ((FLAG) == LTDC_FLAG_RR))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset LTDC handle state
+ * @param __HANDLE__: specifies the LTDC handle.
+ * @retval None
+ */
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
+
+/**
+ * @brief Enable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
+
+/**
+ * @brief Disable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
+
+/**
+ * @brief Enable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be enabled
+ This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)(((uint32_t)((__HANDLE__)->Instance)) + 0x84 + (0x80*(__LAYER__))))
+
+#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((__HAL_LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Disable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be disabled
+ This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((__HAL_LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Reload Layer Configuration.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified LTDC interrupt has occurred or not.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval The state of INTERRUPT (SET or RESET).
+ */
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc);
+
+/* IO operation functions *****************************************************/
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
+
+/* Peripheral State functions *************************************************/
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
+
+#endif /* STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LTDC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_nand.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,250 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nand.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of NAND HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NAND_H
+#define __STM32F4xx_HAL_NAND_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NAND
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL NAND State structures definition
+ */
+typedef enum
+{
+ HAL_NAND_STATE_RESET = 0x00, /*!< NAND not yet initialized or disabled */
+ HAL_NAND_STATE_READY = 0x01, /*!< NAND initialized and ready for use */
+ HAL_NAND_STATE_BUSY = 0x02, /*!< NAND internal process is ongoing */
+ HAL_NAND_STATE_ERROR = 0x03 /*!< NAND error state */
+}HAL_NAND_StateTypeDef;
+
+/**
+ * @brief NAND Memory electronic signature Structure definition
+ */
+typedef struct
+{
+ /*<! NAND memory electronic signature maker and device IDs */
+
+ uint8_t Maker_Id;
+
+ uint8_t Device_Id;
+
+ uint8_t Third_Id;
+
+ uint8_t Fourth_Id;
+}NAND_IDTypeDef;
+
+/**
+ * @brief NAND Memory address Structure definition
+ */
+typedef struct
+{
+ uint16_t Page; /*!< NAND memory Page address */
+
+ uint16_t Zone; /*!< NAND memory Zone address */
+
+ uint16_t Block; /*!< NAND memory Block address */
+
+}NAND_AddressTypedef;
+
+/**
+ * @brief NAND Memory info Structure definition
+ */
+typedef struct
+{
+ uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in K. bytes */
+
+ uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in K. bytes */
+
+ uint32_t BlockSize; /*!< NAND memory block size number of pages */
+
+ uint32_t BlockNbr; /*!< NAND memory number of blocks */
+
+ uint32_t ZoneSize; /*!< NAND memory zone size measured in number of blocks */
+}NAND_InfoTypeDef;
+
+/**
+ * @brief NAND handle Structure definition
+ */
+typedef struct
+{
+ FMC_NAND_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NAND locking object */
+
+ __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
+
+ NAND_InfoTypeDef Info; /*!< NAND characteristic information structure */
+}NAND_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup NAND_Exported_Constants
+ * @{
+ */
+#define NAND_DEVICE1 ((uint32_t)0x70000000)
+#define NAND_DEVICE2 ((uint32_t)0x80000000)
+#define NAND_WRITE_TIMEOUT ((uint32_t)0x01000000)
+
+#define CMD_AREA ((uint32_t)(1<<16)) /* A16 = CLE high */
+#define ADDR_AREA ((uint32_t)(1<<17)) /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A ((uint8_t)0x00)
+#define NAND_CMD_AREA_B ((uint8_t)0x01)
+#define NAND_CMD_AREA_C ((uint8_t)0x50)
+#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30)
+
+#define NAND_CMD_WRITE0 ((uint8_t)0x80)
+#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10)
+#define NAND_CMD_ERASE0 ((uint8_t)0x60)
+#define NAND_CMD_ERASE1 ((uint8_t)0xD0)
+#define NAND_CMD_READID ((uint8_t)0x90)
+#define NAND_CMD_STATUS ((uint8_t)0x70)
+#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A)
+#define NAND_CMD_RESET ((uint8_t)0xFF)
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS ((uint32_t)0x00000100)
+#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200)
+#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400)
+#define NAND_BUSY ((uint32_t)0x00000000)
+#define NAND_ERROR ((uint32_t)0x00000001)
+#define NAND_READY ((uint32_t)0x00000040)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset NAND handle state
+ * @param __HANDLE__: specifies the NAND handle.
+ * @retval None
+ */
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+
+/**
+ * @brief NAND memory address computation.
+ * @param __ADDRESS__: NAND memory address.
+ * @param __HANDLE__ : NAND handle.
+ * @retval NAND Raw address value
+ */
+#define __ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
+ (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
+
+/**
+ * @brief NAND memory address cycling.
+ * @param __ADDRESS__: NAND memory address.
+ * @retval NAND address cycling value.
+ */
+#define __ADDR_1st_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */
+#define __ADDR_2nd_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */
+#define __ADDR_3rd_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */
+#define __ADDR_4th_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/* IO operation functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress);
+
+/* NAND Control functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_nor.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,243 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nor.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of NOR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NOR_H
+#define __STM32F4xx_HAL_NOR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NOR
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_NOR_STATE_RESET = 0x00, /*!< NOR not yet initialized or disabled */
+ HAL_NOR_STATE_READY = 0x01, /*!< NOR initialized and ready for use */
+ HAL_NOR_STATE_BUSY = 0x02, /*!< NOR internal processing is ongoing */
+ HAL_NOR_STATE_ERROR = 0x03, /*!< NOR error state */
+ HAL_NOR_STATE_PROTECTED = 0x04 /*!< NOR NORSRAM device write protected */
+}HAL_NOR_StateTypeDef;
+
+/**
+ * @brief FMC NOR Status typedef
+ */
+typedef enum
+{
+ NOR_SUCCESS = 0,
+ NOR_ONGOING,
+ NOR_ERROR,
+ NOR_TIMEOUT
+}NOR_StatusTypedef;
+
+/**
+ * @brief FMC NOR ID typedef
+ */
+typedef struct
+{
+ uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */
+
+ uint16_t Device_Code1;
+
+ uint16_t Device_Code2;
+
+ uint16_t Device_Code3; /*!< Defines the devices' codes used to identify the memory.
+ These codes can be accessed by performing read operations with specific
+ control signals and addresses set.They can also be accessed by issuing
+ an Auto Select command */
+}NOR_IDTypeDef;
+
+/**
+ * @brief FMC NOR CFI typedef
+ */
+typedef struct
+{
+ /*!< Defines the information stored in the memory's Common flash interface
+ which contains a description of various electrical and timing parameters,
+ density information and functions supported by the memory */
+
+ uint16_t CFI_1;
+
+ uint16_t CFI_2;
+
+ uint16_t CFI_3;
+
+ uint16_t CFI_4;
+}NOR_CFITypeDef;
+
+/**
+ * @brief NOR handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NOR locking object */
+
+ __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */
+
+}NOR_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Constants
+ * @{
+ */
+/* NOR device IDs addresses */
+#define MC_ADDRESS ((uint16_t)0x0000)
+#define DEVICE_CODE1_ADDR ((uint16_t)0x0001)
+#define DEVICE_CODE2_ADDR ((uint16_t)0x000E)
+#define DEVICE_CODE3_ADDR ((uint16_t)0x000F)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS ((uint16_t)0x61)
+#define CFI2_ADDRESS ((uint16_t)0x62)
+#define CFI3_ADDRESS ((uint16_t)0x63)
+#define CFI4_ADDRESS ((uint16_t)0x64)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT ((uint16_t)0xFFFF)
+
+/* NOR memory data width */
+#define NOR_MEMORY_8B ((uint8_t)0x0)
+#define NOR_MEMORY_16B ((uint8_t)0x1)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000)
+#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000)
+#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000)
+#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset NOR handle state
+ * @param __HANDLE__: specifies the NOR handle.
+ * @retval None
+ */
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+
+/**
+ * @brief NOR memory address shifting.
+ * @param __ADDRESS__: NOR memory address
+ * @retval NOR shifted address value
+ */
+#define __NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) (((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_8B)? ((uint32_t)((__NOR_ADDRESS) + (2 * (__ADDRESS__)))):\
+ ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__))))
+
+/**
+ * @brief NOR memory write data to specified address.
+ * @param __ADDRESS__: NOR memory address
+ * @param __DATA__: Data to write
+ * @retval None
+ */
+#define __NOR_WRITE(__ADDRESS__, __DATA__) (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+
+/* NOR Control functions *****************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+
+/* NOR State functions ********************************************************/
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+NOR_StatusTypedef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_pccard.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,185 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pccard.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PCCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCCARD_H
+#define __STM32F4xx_HAL_PCCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCCARD
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_PCCARD_STATE_RESET = 0x00, /*!< PCCARD peripheral not yet initialized or disabled */
+ HAL_PCCARD_STATE_READY = 0x01, /*!< PCCARD peripheral ready */
+ HAL_PCCARD_STATE_BUSY = 0x02, /*!< PCCARD peripheral busy */
+ HAL_PCCARD_STATE_ERROR = 0x04 /*!< PCCARD peripheral error */
+}HAL_PCCARD_StateTypeDef;
+
+typedef enum
+{
+ CF_SUCCESS = 0,
+ CF_ONGOING,
+ CF_ERROR,
+ CF_TIMEOUT
+}CF_StatusTypedef;
+
+/**
+ * @brief FMC_PCCARD handle Structure definition
+ */
+typedef struct
+{
+ FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */
+
+ FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */
+
+ __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */
+
+ HAL_LockTypeDef Lock; /*!< PCCARD Lock */
+
+}PCCARD_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Constants
+ * @{
+ */
+
+#define CF_DEVICE_ADDRESS ((uint32_t)0x90000000)
+#define CF_ATTRIBUTE_SPACE_ADDRESS ((uint32_t)0x98000000) /* Attribute space size to @0x9BFF FFFF */
+#define CF_COMMON_SPACE_ADDRESS CF_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */
+#define CF_IO_SPACE_ADDRESS ((uint32_t)0x9C000000) /* IO space size to @0x9FFF FFFF */
+#define CF_IO_SPACE_PRIMARY_ADDR ((uint32_t)0x9C0001F0) /* IO space size to @0x9FFF FFFF */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ((uint8_t)0x00) /* Data register */
+#define CF_SECTOR_COUNT ((uint8_t)0x02) /* Sector Count register */
+#define CF_SECTOR_NUMBER ((uint8_t)0x03) /* Sector Number register */
+#define CF_CYLINDER_LOW ((uint8_t)0x04) /* Cylinder low register */
+#define CF_CYLINDER_HIGH ((uint8_t)0x05) /* Cylinder high register */
+#define CF_CARD_HEAD ((uint8_t)0x06) /* Card/Head register */
+#define CF_STATUS_CMD ((uint8_t)0x07) /* Status(read)/Command(write) register */
+#define CF_STATUS_CMD_ALTERNATE ((uint8_t)0x0E) /* Alternate Status(read)/Command(write) register */
+#define CF_COMMON_DATA_AREA ((uint16_t)0x0400) /* Start of data area (for Common access only!) */
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ((uint8_t)0x20)
+#define CF_WRITE_SECTOR_CMD ((uint8_t)0x30)
+#define CF_ERASE_SECTOR_CMD ((uint8_t)0xC0)
+#define CF_IDENTIFY_CMD ((uint8_t)0xEC)
+
+/* Compact Flash status */
+#define CF_TIMEOUT_ERROR ((uint8_t)0x60)
+#define CF_BUSY ((uint8_t)0x80)
+#define CF_PROGR ((uint8_t)0x01)
+#define CF_READY ((uint8_t)0x40)
+
+#define CF_SECTOR_SIZE ((uint32_t)255) /* In half words */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset PCCARD handle state
+ * @param __HANDLE__: specifies the PCCARD handle.
+ * @retval None
+ */
+#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
+HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CF_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Reset(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
+
+/* PCCARD State functions *******************************************************/
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);
+CF_StatusTypedef HAL_CF_GetStatus(PCCARD_HandleTypeDef *hpccard);
+CF_StatusTypedef HAL_CF_ReadStatus(PCCARD_HandleTypeDef *hpccard);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_PCCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_pcd.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,281 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+ /**
+ * @brief PCD State structures definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00,
+ HAL_PCD_STATE_READY = 0x01,
+ HAL_PCD_STATE_ERROR = 0x02,
+ HAL_PCD_STATE_BUSY = 0x03,
+ HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+
+typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef PCD_EPTypeDef ;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0
+#define PCD_SPEED_HIGH_IN_FULL 1
+#define PCD_SPEED_FULL 2
+/**
+ * @}
+ */
+
+ /** @defgroup PCD_PHY_Module
+ * @{
+ */
+#define PCD_PHY_ULPI 1
+#define PCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Instance_definition
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+ ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup PCD_Interrupt_Clock
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+ ~(USB_OTG_PCGCCTL_STOPCLK)
+
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE ((uint32_t)0x08)
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE ((uint32_t)0x10)
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE ((uint32_t)0x08)
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE ((uint32_t)0x10)
+
+
+#define USB_HS_EXTI_LINE_WAKEUP ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_FS_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT() EXTI->IMR |= (USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_GET_FLAG() EXTI->PR & (USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG() EXTI->PR = (USB_HS_EXTI_LINE_WAKEUP)
+
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_HS_EXTI_LINE_WAKEUP
+
+
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(USB_HS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(USB_HS_EXTI_LINE_WAKEUP;)\
+ EXTI->RTSR |= USB_HS_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= USB_HS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_FS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT() EXTI->IMR |= USB_FS_EXTI_LINE_WAKEUP
+#define __HAL_USB_FS_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_FS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_FS_EXTI_GET_FLAG() EXTI->PR & (USB_FS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG() EXTI->PR = USB_FS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_FS_EXTI_LINE_WAKEUP
+
+
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(USB_FS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_FS_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= USB_FS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_FS_EXTI_LINE_WAKEUP)
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+/* I/O operation functions *****************************************************/
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+
+/* Create an alias to keep compatibility with the old name */
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+
+/* Peripheral State functions **************************************************/
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_pcd_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,78 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_EX_H
+#define __STM32F4xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Peripheral Extended functions *********************************************/
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_pwr.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,337 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_H
+#define __STM32F4xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
+ This parameter can be a value of @ref PWR_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+/* Alias word address of DBP bit */
+#define CR_OFFSET (PWR_OFFSET + 0x00)
+#define DBP_BitNumber 0x08
+#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BitNumber 0x04
+#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
+
+/* Alias word address of PMODE bit */
+#define PMODE_BitNumber 0x0E
+#define CR_PMODE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PMODE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+/* Alias word address of EWUP bit */
+#define CSR_OFFSET (PWR_OFFSET + 0x04)
+#define EWUP_BitNumber 0x08
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
+
+/** @defgroup PWR_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins
+ * @{
+ */
+
+#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP
+#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_detection_level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_Mode
+ * @{
+ */
+#define PWR_MODE_EVT ((uint32_t)0x00000000) /*!< No Interrupt */
+#define PWR_MODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_MODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_MODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \
+ ((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_Voltage_Scale
+ * @{
+ */
+#define PWR_REGULATOR_VOLTAGE_SCALE1 ((uint32_t)0x0000C000)
+#define PWR_REGULATOR_VOLTAGE_SCALE2 ((uint32_t)0x00008000)
+#define PWR_REGULATOR_VOLTAGE_SCALE3 ((uint32_t)0x00004000)
+#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_BRR PWR_CSR_BRR
+#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) (MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)))
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+ * when the device wakes up from Standby mode or by a system reset
+ * or power reset.
+ * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
+ * scaling output selection is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2)
+
+#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @brief Enable the PVD Exti Line.
+ * @param __EXTILINE__: specifies the PVD Exti sources to be enabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the PVD EXTI Line.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/**
+ * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+ * @param __EXTILINE__: specifies the PVD Exti sources to be cleared.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__) (EXTI->PR & (__EXTILINE__))
+
+/**
+ * @brief Clear the PVD Exti flag.
+ * @param __EXTILINE__: specifies the PVD Exti sources to be cleared.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__) (EXTI->PR = (__EXTILINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None
+ */
+#define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/* Include PWR HAL Extension module */
+#include "stm32f4xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* Peripheral Control functions **********************************************/
+/* PVD configuration */
+void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_pwr_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,197 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+/* Alias word address of FPDS bit */
+#define FPDS_BitNumber 0x09
+#define CR_FPDS_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (FPDS_BitNumber * 4))
+
+/* Alias word address of ODEN bit */
+#define ODEN_BitNumber 0x10
+#define CR_ODEN_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODEN_BitNumber * 4))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BitNumber 0x11
+#define CR_ODSWEN_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODSWEN_BitNumber * 4))
+
+/* Alias word address of MRLVDS bit */
+#define MRLVDS_BitNumber 0x0B
+#define CR_MRLVDS_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (MRLVDS_BitNumber * 4))
+
+/* Alias word address of LPLVDS bit */
+#define LPLVDS_BitNumber 0x0A
+#define CR_LPLVDS_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (LPLVDS_BitNumber * 4))
+
+/* --- CSR Register ---*/
+/* Alias word address of BRE bit */
+#define BRE_BitNumber 0x09
+#define CSR_BRE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (BRE_BitNumber * 4))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
+
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag
+ * @{
+ */
+#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief Macros to enable or disable the Over drive mode.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief Check PWR flag is set or not.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+ * is ready
+ * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+ * switching is ready
+ * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+ * is enabled in Stop mode
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/* Exported functions --------------------------------------------------------*/
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+HAL_StatusTypeDef HAL_PWREx_ActivateOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DeactivateOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_rcc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1177 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_H
+#define __STM32F4xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
+
+ uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432 */
+
+ uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+ uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The calibration trimming value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
+#define HSION_BitNumber 0x00
+#define CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (HSION_BitNumber * 4))
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber 0x13
+#define CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber 0x18
+#define CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+/* Alias word address of PLLI2SON bit */
+#define PLLI2SON_BitNumber 0x1A
+#define CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLI2SON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+/* Alias word address of I2SSRC bit */
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08)
+#define I2SSRC_BitNumber 0x17
+#define CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (I2SSRC_BitNumber * 4))
+
+/* --- BDCR Register ---*/
+/* Alias word address of RTCEN bit */
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70)
+#define RTCEN_BitNumber 0x0F
+#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber 0x10
+#define BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74)
+#define LSION_BitNumber 0x00
+#define CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+
+/* CR register byte 3 (Bits[23:16]) base address */
+#define CR_BYTE2_ADDRESS ((uint32_t)0x40023802)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+
+/* BDCR register base address */
+#define BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+
+#define DBP_TIMEOUT_VALUE ((uint32_t)100)
+#define LSE_TIMEOUT_VALUE ((uint32_t)600)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint8_t)0x00)
+#define RCC_HSE_ON ((uint8_t)0x01)
+#define RCC_HSE_BYPASS ((uint8_t)0x05)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_BYPASS ((uint8_t)0x05)
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint8_t)0x00)
+#define RCC_HSI_ON ((uint8_t)0x01)
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint8_t)0x00)
+#define RCC_LSI_ON ((uint8_t)0x01)
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint8_t)0x00)
+#define RCC_PLL_OFF ((uint8_t)0x01)
+#define RCC_PLL_ON ((uint8_t)0x02)
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLLP_Clock_Divider
+ * @{
+ */
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002)
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004)
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006)
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63)
+#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
+#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008)
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
+ ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
+ ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
+ ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+ ((HCLK) == RCC_SYSCLK_DIV512))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+ ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+ ((PCLK) == RCC_HCLK_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100)
+#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200)
+#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300)
+#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300)
+#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300)
+#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300)
+#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300)
+#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300)
+#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300)
+#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300)
+#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300)
+#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300)
+#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300)
+#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300)
+#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300)
+#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300)
+#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300)
+#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300)
+#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300)
+#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300)
+#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2S_Clock_Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000)
+#define RCC_I2SCLKSOURCE_EXT ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Index
+ * @{
+ */
+#define RCC_MCO1 ((uint32_t)0x00000000)
+#define RCC_MCO2 ((uint32_t)0x00000001)
+
+#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO1_Clock_Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000)
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO2_Clock_Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000)
+#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler
+ * @{
+ */
+#define RCC_MCODIV_1 ((uint32_t)0x00000000)
+#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+ ((DIV) == RCC_MCODIV_5))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20)
+#define RCC_IT_CSS ((uint8_t)0x80)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - 0XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)0x41)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
+#define RCC_FLAG_BORRST ((uint8_t)0x79)
+#define RCC_FLAG_PINRST ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
+
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __GPIOA_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOAEN))
+#define __GPIOB_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOBEN))
+#define __GPIOC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOCEN))
+#define __GPIOD_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIODEN))
+#define __GPIOE_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOEEN))
+#define __GPIOH_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOHEN))
+#define __CRC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CRCEN))
+#define __BKPSRAM_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_BKPSRAMEN))
+#define __CCMDATARAMEN_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CCMDATARAMEN))
+#define __DMA1_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA1EN))
+#define __DMA2_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA2EN))
+
+#define __GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+#define __DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+
+#define __USB_OTG_FS_CLK_DISABLE() do { (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN));\
+ __SYSCFG_CLK_DISABLE();\
+ }while(0)
+
+#define __RNG_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_RNGEN))
+#define __RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM2EN))
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM5EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
+#define __I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C3EN))
+#define __PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
+
+#define __TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
+#define __USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
+#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
+#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
+#define __SDIO_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDIOEN))
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+#define __SPI4_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI4EN))
+#define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
+#define __TIM9_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM9EN))
+#define __TIM10_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM10EN))
+#define __TIM11_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM11EN))
+
+#define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFF)
+#define __GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+#define __DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+
+#define __AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00)
+#define __GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+#define __DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#define __AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFF)
+#define __USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00)
+#define __USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+/* alias define maintained for legacy */
+#define __OTGFS_FORCE_RESET __USB_OTG_FS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __USB_OTG_FS_RELEASE_RESET
+
+#define __RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+#define __PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
+#define __TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+#define __TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+
+#define __APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
+#define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+
+/** @brief Force or release AHB3 peripheral reset.
+ */
+#define __AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFF)
+#define __AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00)
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+#define __DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+
+#define __GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+#define __DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+/* alias define maintained for legacy */
+#define __OTGFS_CLK_SLEEP_ENABLE __USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __USB_OTG_FS_CLK_SLEEP_DISABLE
+
+#define __RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+#define __PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+#define __TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+
+#define __TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+#define __TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) CR_HSION_BB = DISABLE)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
+ RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM)))
+
+/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) CSR_LSION_BB = ENABLE)
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) CSR_LSION_BB = DISABLE)
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator.
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *) CR_BYTE2_ADDRESS = (__STATE__))
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator.
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) (*(__IO uint8_t *) BDCR_BYTE0_ADDRESS = (__STATE__))
+
+/** @brief Macros to enable or disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) BDCR_RTCEN_BB = ENABLE)
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macros to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the HSE clock is used as RTC clock source, the RTC
+ * cannot be used in STOP and STANDBY modes.
+ * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
+ * RTC clock source).
+ */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
+ RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \
+ } while (0)
+
+/** @brief Macros to force or release the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) BDCR_BDRST_BB = ENABLE)
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) BDCR_BDRST_BB = DISABLE)
+
+/** @brief Macros to enable or disable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) CR_PLLON_BB = ENABLE)
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) CR_PLLON_BB = DISABLE)
+
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 192 and 432 MHz.
+ * @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note You have to set the PLLP parameter correctly to not exceed 168 MHz on
+ * the System clock frequency.
+ * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__)\
+ (RCC->PLLCFGR = (0x20000000 | (__PLLM__) | ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | (__RCC_PLLSource__) | \
+ ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_I2SCLK(__SOURCE__) (*(__IO uint32_t *) CFGR_I2SSRC_BB = (__SOURCE__))
+
+/** @brief Macros to enable or disable the PLLI2S.
+ * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) CR_PLLI2SON_BB = ENABLE)
+#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) CR_PLLI2SON_BB = DISABLE)
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) | ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - RCC_CFGR_SWS_HSI: HSI used as system clock.
+ * - RCC_CFGR_SWS_HSE: HSE used as system clock.
+ * - RCC_CFGR_SWS_PLL: PLL used as system clock.
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
+ * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+ * @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+ * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+ * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+ * @arg RCC_FLAG_PINRST: Pin reset.
+ * @arg RCC_FLAG_PORRST: POR/PDR reset.
+ * @arg RCC_FLAG_SFTRST: Software reset.
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+ * @arg RCC_FLAG_LPWRRST: Low Power reset.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
+
+#define __RCC_PLLSRC() ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> POSITION_VAL(RCC_PLLCFGR_PLLSRC))
+
+
+/* Include RCC HAL Extension module */
+#include "stm32f4xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CCSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_rcc_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1165 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_EX_H
+#define __STM32F4xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+
+}RCC_PLLSAIInitTypeDef;
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
+ This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+#if defined(STM32F411xE)
+ uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 62 */
+#endif /* STM32F411xE */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+}RCC_PLLI2SInitTypeDef;
+
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000002F))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000003))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_BitAddress_AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+/* --- CR Register ---*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/* Alias word address of PLLSAION bit */
+#define PLLSAION_BitNumber 0x1C
+#define CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLSAION_BitNumber * 4))
+
+/* --- DCKCFGR Register ---*/
+/* Alias word address of TIMPRE bit */
+#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C)
+#define TIMPRE_BitNumber 0x18
+#define DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (TIMPRE_BitNumber * 4))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLI2S_Clock_Source
+ * @{
+ */
+#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_Clock_Source
+ * @{
+ */
+#define IS_RCC_PLLSAIN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_DIVQ
+ * @{
+ */
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLI2S_DIVQ
+ * @{
+ */
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_DIVR
+ * @{
+ */
+#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000)
+#define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000)
+#define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000)
+#define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000)
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_4) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_8) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_16))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI_BlockA_Clock_Source
+ * @{
+ */
+#define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000)
+#define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI_BlockB_Clock_Source
+ * @{
+ */
+#define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000)
+#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM_PRescaler_Selection
+ * @{
+ */
+#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00)
+#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01)
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F411xE)
+/** @defgroup RCCEx_PLLI2S_PLLI2SM
+ * @{
+ */
+#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSE_Dual_Mode_Selection
+ * @{
+ */
+#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00)
+#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01)
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+/**
+ * @}
+ */
+
+#endif /* STM32F411xE */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/*----------------------------------- STM32F42xxx/STM32F43xxx----------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __GPIOI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOIEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN))
+#define __GPIOJ_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOJEN))
+#define __GPIOK_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOKEN))
+#define __DMA2D_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA2DEN))
+#define __ETHMAC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACEN))
+#define __ETHMACTX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACTXEN))
+#define __ETHMACRX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACRXEN))
+#define __ETHMACPTP_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACPTPEN))
+#define __USB_OTG_HS_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSEN))
+#define __USB_OTG_HS_ULPI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSULPIEN))
+
+#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+#define __DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#define __ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __ETH_CLK_ENABLE() do { \
+ __ETHMAC_CLK_ENABLE(); \
+ __ETHMACTX_CLK_ENABLE(); \
+ __ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __ETH_CLK_DISABLE() do { \
+ __ETHMACTX_CLK_DISABLE(); \
+ __ETHMACRX_CLK_DISABLE(); \
+ __ETHMAC_CLK_DISABLE(); \
+ } while(0)
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+
+#define __DCMI_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_DCMIEN))
+#define __DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __CRYP_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_CRYPEN))
+#define __HASH_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_HASHEN))
+
+#define __CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __FMC_CLK_ENABLE() (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN))
+#define __FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
+#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
+#define __CAN1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN1EN))
+#define __CAN2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN2EN))
+#define __DAC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN))
+#define __UART7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART7EN))
+#define __UART8_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART8EN))
+
+#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
+#define __ADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC2EN))
+#define __ADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC3EN))
+#define __SPI5_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI5EN))
+#define __SPI6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI6EN))
+#define __SAI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SAI1EN))
+
+#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __LTDC_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_LTDCEN))
+
+#define __LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F429xx || STM32F439xx */
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __OTGHS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+#define __DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+
+#define __GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __OTGHS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+#define __DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#define __DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+
+#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+
+#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#define __LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F429xx|| STM32F439xx */
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __OTGHS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __OTGHSULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+#define __SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN))
+#define __DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+
+#define __GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __OTGHS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __OTGHSULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+#define __DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+
+#define __TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+
+#define __TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#define __SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+
+#define __LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F429xx || STM32F439xx */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/*----------------------------------- STM32F40xxx/STM32F41xxx----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __GPIOI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOIEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN))
+#define __USB_OTG_HS_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSEN))
+#define __USB_OTG_HS_ULPI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSULPIEN))
+
+#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __ETHMAC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACEN))
+#define __ETHMACTX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACTXEN))
+#define __ETHMACRX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACRXEN))
+#define __ETHMACPTP_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACPTPEN))
+#define __ETH_CLK_ENABLE() do { \
+ __ETHMAC_CLK_ENABLE(); \
+ __ETHMACTX_CLK_ENABLE(); \
+ __ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __ETH_CLK_DISABLE() do { \
+ __ETHMACTX_CLK_DISABLE(); \
+ __ETHMACRX_CLK_DISABLE(); \
+ __ETHMAC_CLK_DISABLE(); \
+ } while(0)
+#endif /* STM32F407xx || STM32F417xx */
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __DCMI_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_DCMIEN))
+#define __DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __CRYP_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_CRYPEN))
+#define __HASH_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_HASHEN))
+
+#define __CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __FSMC_CLK_ENABLE() (RCC->AHB3ENR |= (RCC_AHB3ENR_FSMCEN))
+#define __FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
+#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
+#define __CAN1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN1EN))
+#define __CAN2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN2EN))
+#define __DAC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN))
+
+#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
+#define __ADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC2EN))
+#define __ADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC3EN))
+
+#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __OTGHS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+
+#define __GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __OTGHS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
+#define __FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __OTGHS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __OTGHSULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+
+#define __GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __OTGHS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __OTGHSULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
+#define __FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+
+#define __TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+
+#define __TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/*------------------------------------------ STM32F411xx --------------------------------------*/
+#if defined(STM32F411xE)
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ */
+#define __SPI5_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI5EN))
+#define __SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ */
+#define __SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+
+#endif /* STM32F411xE */
+/*---------------------------------------------------------------------------------------------*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+
+/** @brief Macro to configure the Timers clocks prescalers
+ * @note This feature is only available with STM32F429x/439x Devices.
+ * @param __PRESC__ : specifies the Timers clocks prescalers selection
+ * This parameter can be one of the following values:
+ * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1 or 2,
+ * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
+ * division by 4 or more.
+ * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
+ * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
+ * to division by 8 or more.
+ */
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) DCKCFGR_TIMPRE_BB = (__PRESC__))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F411xE)
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLLI2S jitter.
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)) | (__PLLI2SM__))
+#endif /* STM32F411xE */
+
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @brief Macros to Enable or Disable the PLLISAI.
+ * @note The PLLSAI is only available with STM32F429x/439x Devices.
+ * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) CR_PLLSAION_BB = ENABLE)
+#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) CR_PLLSAION_BB = DISABLE)
+
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ * @note The PLLSAI is only available with STM32F429x/439x Devices.
+ * @note This function must be used only when the PLLSAI is disabled.
+ * @note PLLSAI clock source is common with the main PLL (configured in
+ * RCC_PLLConfig function )
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLSAIQ__: specifies the division factor for SAI1 clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) (RCC->PLLSAICFGR = ((__PLLSAIN__) << 6) | ((__PLLSAIQ__) << 24) | ((__PLLSAIR__) << 28))
+
+/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SQ__: specifies the division factor for SAI1 clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note the PLLI2SQ parameter is only available with STM32F429x/439x Devices
+ * and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) | ((__PLLI2SQ__) << 24) | ((__PLLI2SR__) << 28))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
+ * @note The SAI peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling the PLLI2S.
+ * @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock .
+ * This parameter must be a number between 1 and 32.
+ * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
+ */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
+ * @note The SAI peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+ * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+
+/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
+ *
+ * @note The LTDC peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 16.
+ * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__)))
+
+/** @brief Macro to configure SAI1BlockA clock source selection.
+ * @note The SAI peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block A clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block A clock.
+ */
+#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__)))
+
+/** @brief Macro to configure SAI1BlockB clock source selection.
+ * @note The SAI peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block B clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block B clock.
+ */
+#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__)))
+
+/** @brief Enable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+ */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Check PLLSAI RDY flag is set or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+#if defined(STM32F411xE)
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode);
+#endif /* STM32F411xE */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_rng.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,222 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rng.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RNG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RNG_H
+#define __STM32F4xx_HAL_RNG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RNG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RNG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_RNG_STATE_RESET = 0x00, /*!< RNG not yet initialized or disabled */
+ HAL_RNG_STATE_READY = 0x01, /*!< RNG initialized and ready for use */
+ HAL_RNG_STATE_BUSY = 0x02, /*!< RNG internal process is ongoing */
+ HAL_RNG_STATE_TIMEOUT = 0x03, /*!< RNG timeout state */
+ HAL_RNG_STATE_ERROR = 0x04 /*!< RNG error state */
+
+}HAL_RNG_StateTypeDef;
+
+/**
+ * @brief RNG Handle Structure definition
+ */
+typedef struct
+{
+ RNG_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< RNG locking object */
+
+ __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
+
+}RNG_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RNG_Interrupt_definition
+ * @{
+ */
+#define RNG_IT_CEI ((uint32_t)0x20) /*!< Clock error interrupt */
+#define RNG_IT_SEI ((uint32_t)0x40) /*!< Seed error interrupt */
+
+#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
+ ((IT) == RNG_IT_SEI))
+/**
+ * @}
+ */
+
+
+/** @defgroup RNG_Flag_definition
+ * @{
+ */
+#define RNG_FLAG_DRDY ((uint32_t)0x0001) /*!< Data ready */
+#define RNG_FLAG_CECS ((uint32_t)0x0002) /*!< Clock error current status */
+#define RNG_FLAG_SECS ((uint32_t)0x0004) /*!< Seed error current status */
+
+#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
+ ((FLAG) == RNG_FLAG_CECS) || \
+ ((FLAG) == RNG_FLAG_SECS))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset RNG handle state
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
+
+/**
+ * @brief Enables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN)
+
+/**
+ * @brief Disables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
+
+/**
+ * @brief Gets the selected RNG's flag status.
+ * @param __HANDLE__: RNG Handle
+ * @param __FLAG__: RNG flag
+ * @retval The new state of RNG_FLAG (SET or RESET).
+ */
+#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the RNG's pending flags.
+ * @param __HANDLE__: RNG Handle
+ * @param __FLAG__: RNG flag
+ * @retval None
+ */
+#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Enables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE)
+
+/**
+ * @brief Disables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
+
+/**
+ * @brief Checks whether the specified RNG interrupt has occurred or not.
+ * @param __HANDLE__: RNG Handle
+ * @param __INTERRUPT__: specifies the RNG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RNG_FLAG_DRDY: Data ready interrupt
+ * @arg RNG_FLAG_CECS: Clock error interrupt
+ * @arg RNG_FLAG_SECS: Seed error interrupt
+ * @retval The new state of RNG_FLAG (SET or RESET).
+ */
+#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
+HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
+
+/* Peripheral Control functions ************************************************/
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng);
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng);
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ReadyCallback(RNG_HandleTypeDef* hrng);
+void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
+
+/* Peripheral State functions **************************************************/
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RNG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_rtc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,766 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_H
+#define __STM32F4xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */
+
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTC_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC Time SubSeconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t DayLightSaving; /*!< Specifies DayLight Save Operation.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief Time Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants
+ * @{
+ */
+
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F)
+#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
+ RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
+ RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
+
+#define RTC_TIMEOUT_VALUE 1000
+
+/** @defgroup RTC_Hour_Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040)
+
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_selection_Definitions
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
+#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
+
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMB) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000)
+
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000)
+
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Asynchronous_Predivider
+ * @{
+ */
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F)
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_Synchronous_Predivider
+ * @{
+ */
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Time_Definitions
+ * @{
+ */
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000)
+
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000)
+
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions
+ * @{
+ */
+#define FORMAT_BIN ((uint32_t)0x000000000)
+#define FORMAT_BCD ((uint32_t)0x000000001)
+
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == FORMAT_BIN) || ((FORMAT) == FORMAT_BCD))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Year_Date_Definitions
+ * @{
+ */
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions
+ * @{
+ */
+
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
+#define RTC_MONTH_MARCH ((uint8_t)0x03)
+#define RTC_MONTH_APRIL ((uint8_t)0x04)
+#define RTC_MONTH_MAY ((uint8_t)0x05)
+#define RTC_MONTH_JUNE ((uint8_t)0x06)
+#define RTC_MONTH_JULY ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
+
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
+
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Definitions
+ * @{
+ */
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000)
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_AlarmMask_Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080)
+
+#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+#define RTC_ALARM_B RTC_CR_ALRBE
+
+#define IS_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Value
+ * @{
+ */
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_None))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000)
+#define RTC_IT_WUT ((uint32_t)0x00004000)
+#define RTC_IT_ALRB ((uint32_t)0x00002000)
+#define RTC_IT_ALRA ((uint32_t)0x00001000)
+#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400)
+#define RTC_FLAG_ALRBF ((uint32_t)0x00000200)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
+#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCA; \
+ (__HANDLE__)->Instance->WPR = 0x53; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFF; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+ * @brief Disable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __FLAG__) ((((((__HANDLE__)->Instance->ISR)& ((__FLAG__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @arg RTC_FLAG_ALRAWF
+ * @arg RTC_FLAG_ALRBWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
+
+/**
+ * @brief Enable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+/**
+ * @brief Disable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @brief Clear the RTC Exti flags.
+ * @param __FLAG__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+
+
+/* Include RTC HAL Extension module */
+#include "stm32f4xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_rtc_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,691 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_EX_H
+#define __STM32F4xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t PinSelection; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004)
+#define RTC_BKP_DR5 ((uint32_t)0x00000005)
+#define RTC_BKP_DR6 ((uint32_t)0x00000006)
+#define RTC_BKP_DR7 ((uint32_t)0x00000007)
+#define RTC_BKP_DR8 ((uint32_t)0x00000008)
+#define RTC_BKP_DR9 ((uint32_t)0x00000009)
+#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
+#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
+#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
+#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
+#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
+#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
+#define RTC_BKP_DR16 ((uint32_t)0x00000010)
+#define RTC_BKP_DR17 ((uint32_t)0x00000011)
+#define RTC_BKP_DR18 ((uint32_t)0x00000012)
+#define RTC_BKP_DR19 ((uint32_t)0x00000013)
+
+#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
+ ((BKP) == RTC_BKP_DR1) || \
+ ((BKP) == RTC_BKP_DR2) || \
+ ((BKP) == RTC_BKP_DR3) || \
+ ((BKP) == RTC_BKP_DR4) || \
+ ((BKP) == RTC_BKP_DR5) || \
+ ((BKP) == RTC_BKP_DR6) || \
+ ((BKP) == RTC_BKP_DR7) || \
+ ((BKP) == RTC_BKP_DR8) || \
+ ((BKP) == RTC_BKP_DR9) || \
+ ((BKP) == RTC_BKP_DR10) || \
+ ((BKP) == RTC_BKP_DR11) || \
+ ((BKP) == RTC_BKP_DR12) || \
+ ((BKP) == RTC_BKP_DR13) || \
+ ((BKP) == RTC_BKP_DR14) || \
+ ((BKP) == RTC_BKP_DR15) || \
+ ((BKP) == RTC_BKP_DR16) || \
+ ((BKP) == RTC_BKP_DR17) || \
+ ((BKP) == RTC_BKP_DR18) || \
+ ((BKP) == RTC_BKP_DR19))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+
+#define IS_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Selection
+ * @{
+ */
+#define RTC_TAMPERPIN_PC13 ((uint32_t)0x00000000)
+#define RTC_TAMPERPIN_PI8 ((uint32_t)0x00010000)
+
+#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_PC13) || \
+ ((PIN) == RTC_TAMPERPIN_PI8))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPPIN_PI8 ((uint32_t)0x00020000)
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13) || \
+ ((PIN) == RTC_TIMESTAMPPIN_PI8))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+
+#define IS_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
+ consecutive samples at the active leve. */
+
+#define IS_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+
+#define IS_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+
+#define IS_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
+
+#define IS_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Digital_Calibration_Definitions
+ * @{
+ */
+#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000)
+#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080)
+
+#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
+ ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
+
+#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 8s, else 2exp18 RTCCLK seconds */
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions
+ * @{
+ */
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
+
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value
+ * @{
+ */
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
+
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
+
+/**
+ * @brief Disable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+/* Extension Control functions ************************************************/
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+
+/* Extension RTC features functions *******************************************/
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_sai.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,767 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SAI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_H
+#define __STM32F4xx_HAL_SAI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SAI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief SAI Init Structure definition
+ */
+typedef struct
+{
+ uint32_t Protocol; /*!< Specifies the SAI Block protocol.
+ This parameter can be a value of @ref SAI_Block_Protocol */
+
+ uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode.
+ This parameter can be a value of @ref SAI_Block_Mode */
+
+ uint32_t DataSize; /*!< Specifies the SAI Block data size.
+ This parameter can be a value of @ref SAI_Block_Data_Size */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */
+
+ uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity.
+ This parameter can be a value of @ref SAI_Block_Clock_Strobing */
+
+ uint32_t Synchro; /*!< Specifies SAI Block synchronization
+ This parameter can be a value of @ref SAI_Block_Synchronization */
+
+ uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven.
+ This parameter can be a value of @ref SAI_Block_Output_Drive
+ @note this value has to be set before enabling the audio block
+ but after the audio block configuration. */
+
+ uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not.
+ This parameter can be a value of @ref SAI_Block_NoDivider
+ @note: If bit NODIV in the SAI_xCR1 register is cleared, the frame length
+ should be aligned to a number equal to a power of 2, from 8 to 256.
+ If bit NODIV in the SAI_xCR1 register is set, the frame length can
+ take any of the values without constraint since the input clock of
+ the audio block should be equal to the bit clock.
+ There is no MCLK_x clock which can be output. */
+
+ uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold.
+ This parameter can be a value of @ref SAI_Block_Fifo_Threshold */
+
+ uint32_t ClockSource; /*!< Specifies the SAI Block x Clock source.
+ This parameter can be a value of @ref SAI_Clock_Source
+ @note: If ClockSource is equal to SAI_CLKSource_Ext, the PLLI2S
+ and PLLSAI divisions factors will be ignored. */
+
+ uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling.
+ This parameter can be a value of @ref SAI_Audio_Frequency */
+
+}SAI_InitTypeDef;
+
+/**
+ * @brief SAI Block Frame Init structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame.
+ This parameter must be a number between Min_Data = 8 and Max_Data = 256.
+ @note: If master clock MCLK_x pin is declared as an output, the frame length
+ should be aligned to a number equal to power of 2 in order to keep
+ in an audio frame, an integer number of MCLK pulses by bit Clock. */
+
+ uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length.
+ This Parameter specifies the length in number of bit clock (SCK + 1)
+ of the active level of FS signal in audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 128 */
+
+ uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition.
+ This parameter can be a value of @ref SAI_Block_FS_Definition */
+
+ uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity.
+ This parameter can be a value of @ref SAI_Block_FS_Polarity */
+
+ uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset.
+ This parameter can be a value of @ref SAI_Block_FS_Offset */
+
+}SAI_FrameInitTypeDef;
+
+/**
+ * @brief SAI Block Slot Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 24 */
+
+ uint32_t SlotSize; /*!< Specifies the Slot Size.
+ This parameter can be a value of @ref SAI_Block_Slot_Size */
+
+ uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated.
+ This parameter can be a value of @ref SAI_Block_Slot_Active */
+}SAI_SlotInitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SAI_STATE_RESET = 0x00, /*!< SAI not yet initialized or disabled */
+ HAL_SAI_STATE_READY = 0x01, /*!< SAI initialized and ready for use */
+ HAL_SAI_STATE_BUSY = 0x02, /*!< SAI internal process is ongoing */
+ HAL_SAI_STATE_BUSY_TX = 0x12, /*!< Data transmission process is ongoing */
+ HAL_SAI_STATE_BUSY_RX = 0x22, /*!< Data reception process is ongoing */
+ HAL_SAI_STATE_TIMEOUT = 0x03, /*!< SAI timeout state */
+ HAL_SAI_STATE_ERROR = 0x04 /*!< SAI error state */
+
+}HAL_SAI_StateTypeDef;
+
+/**
+ * @brief SAI handle Structure definition
+ */
+typedef struct
+{
+ SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */
+
+ SAI_InitTypeDef Init; /*!< SAI communication parameters */
+
+ SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */
+
+ SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */
+
+ uint16_t *pTxBuffPtr; /*!< Pointer to SAI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SAI Tx transfer size */
+
+ uint16_t TxXferCount; /*!< SAI Tx transfer counter */
+
+ uint16_t *pRxBuffPtr; /*!< Pointer to SAI Rx transfer buffer */
+
+ uint16_t RxXferSize; /*!< SAI Rx transfer size */
+
+ uint16_t RxXferCount; /*!< SAI Rx transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< SAI locking object */
+
+ __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SAI Error code */
+}SAI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Constants
+ * @{
+ */
+/** @defgroup SAI Error Code
+ * @{
+ */
+#define HAL_SAI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SAI_ERROR_OVR ((uint32_t)0x00000001) /*!< Overrun Error */
+#define HAL_SAI_ERROR_UDR ((uint32_t)0x00000002) /*!< Underrun error */
+#define HAL_SAI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Clock_Source
+ * @{
+ */
+#define SAI_CLKSOURCE_PLLSAI ((uint32_t)RCC_SAIACLKSOURCE_PLLSAI)
+#define SAI_CLKSOURCE_PLLI2S ((uint32_t)RCC_SAIACLKSOURCE_PLLI2S)
+#define SAI_CLKSOURCE_EXT ((uint32_t)RCC_SAIACLKSOURCE_EXT)
+
+#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == SAI_CLKSOURCE_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Audio_Frequency
+ * @{
+ */
+#define SAI_AUDIO_FREQUENCY_192K ((uint32_t)192000)
+#define SAI_AUDIO_FREQUENCY_96K ((uint32_t)96000)
+#define SAI_AUDIO_FREQUENCY_48K ((uint32_t)48000)
+#define SAI_AUDIO_FREQUENCY_44K ((uint32_t)44100)
+#define SAI_AUDIO_FREQUENCY_32K ((uint32_t)32000)
+#define SAI_AUDIO_FREQUENCY_22K ((uint32_t)22050)
+#define SAI_AUDIO_FREQUENCY_16K ((uint32_t)16000)
+#define SAI_AUDIO_FREQUENCY_11K ((uint32_t)11025)
+#define SAI_AUDIO_FREQUENCY_8K ((uint32_t)8000)
+
+#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_8K))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mode
+ * @{
+ */
+#define SAI_MODEMASTER_TX ((uint32_t)0x00000000)
+#define SAI_MODEMASTER_RX ((uint32_t)0x00000001)
+#define SAI_MODESLAVE_TX ((uint32_t)0x00000002)
+#define SAI_MODESLAVE_RX ((uint32_t)0x00000003)
+#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \
+ ((MODE) == SAI_MODEMASTER_RX) || \
+ ((MODE) == SAI_MODESLAVE_TX) || \
+ ((MODE) == SAI_MODESLAVE_RX))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Protocol
+ * @{
+ */
+
+#define SAI_FREE_PROTOCOL ((uint32_t)0x00000000)
+#define SAI_AC97_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_1)
+
+#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \
+ ((PROTOCOL) == SAI_AC97_PROTOCOL))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Data_Size
+ * @{
+ */
+#define SAI_DATASIZE_8 ((uint32_t)0x00000040)
+#define SAI_DATASIZE_10 ((uint32_t)0x00000060)
+#define SAI_DATASIZE_16 ((uint32_t)0x00000080)
+#define SAI_DATASIZE_20 ((uint32_t)0x000000A0)
+#define SAI_DATASIZE_24 ((uint32_t)0x000000C0)
+#define SAI_DATASIZE_32 ((uint32_t)0x000000E0)
+
+#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \
+ ((DATASIZE) == SAI_DATASIZE_10) || \
+ ((DATASIZE) == SAI_DATASIZE_16) || \
+ ((DATASIZE) == SAI_DATASIZE_20) || \
+ ((DATASIZE) == SAI_DATASIZE_24) || \
+ ((DATASIZE) == SAI_DATASIZE_32))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_MSB_LSB_transmission
+ * @{
+ */
+
+#define SAI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SAI_FIRSTBIT_LSB ((uint32_t)SAI_xCR1_LSBFIRST)
+
+#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \
+ ((BIT) == SAI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Clock_Strobing
+ * @{
+ */
+#define SAI_CLOCKSTROBING_FALLINGEDGE ((uint32_t)0x00000000)
+#define SAI_CLOCKSTROBING_RISINGEDGE ((uint32_t)SAI_xCR1_CKSTR)
+
+#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \
+ ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Synchronization
+ * @{
+ */
+#define SAI_ASYNCHRONOUS ((uint32_t)0x00000000)
+#define SAI_SYNCHRONOUS ((uint32_t)SAI_xCR1_SYNCEN_0)
+
+#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \
+ ((SYNCHRO) == SAI_SYNCHRONOUS))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Output_Drive
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED ((uint32_t)0x00000000)
+#define SAI_OUTPUTDRIVE_ENABLED ((uint32_t)SAI_xCR1_OUTDRIV)
+
+#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLED) || \
+ ((DRIVE) == SAI_OUTPUTDRIVE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_NoDivider
+ * @{
+ */
+#define SAI_MASTERDIVIDER_ENABLED ((uint32_t)0x00000000)
+#define SAI_MASTERDIVIDER_DISABLED ((uint32_t)SAI_xCR1_NODIV)
+
+#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLED) || \
+ ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Master_Divider
+ * @{
+ */
+#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Frame_Length
+ * @{
+ */
+#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8 <= (LENGTH)) && ((LENGTH) <= 256))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Active_FrameLength
+ * @{
+ */
+#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1 <= (LENGTH)) && ((LENGTH) <= 128))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Definition
+ * @{
+ */
+#define SAI_FS_STARTFRAME ((uint32_t)0x00000000)
+#define SAI_FS_CHANNEL_IDENTIFICATION ((uint32_t)SAI_xFRCR_FSDEF)
+
+#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \
+ ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Polarity
+ * @{
+ */
+#define SAI_FS_ACTIVE_LOW ((uint32_t)0x00000000)
+#define SAI_FS_ACTIVE_HIGH ((uint32_t)SAI_xFRCR_FSPO)
+
+#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \
+ ((POLARITY) == SAI_FS_ACTIVE_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Offset
+ * @{
+ */
+#define SAI_FS_FIRSTBIT ((uint32_t)0x00000000)
+#define SAI_FS_BEFOREFIRSTBIT ((uint32_t)SAI_xFRCR_FSOFF)
+
+#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \
+ ((OFFSET) == SAI_FS_BEFOREFIRSTBIT))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_FirstBit_Offset
+ * @{
+ */
+#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24)
+/**
+ * @}
+ */
+
+ /** @defgroup SAI_Block_Slot_Size
+ * @{
+ */
+#define SAI_SLOTSIZE_DATASIZE ((uint32_t)0x00000000)
+#define SAI_SLOTSIZE_16B ((uint32_t)SAI_xSLOTR_SLOTSZ_0)
+#define SAI_SLOTSIZE_32B ((uint32_t)SAI_xSLOTR_SLOTSZ_1)
+
+#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \
+ ((SIZE) == SAI_SLOTSIZE_16B) || \
+ ((SIZE) == SAI_SLOTSIZE_32B))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Number
+ * @{
+ */
+#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1 <= (NUMBER)) && ((NUMBER) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Active
+ * @{
+ */
+#define SAI_SLOT_NOTACTIVE ((uint32_t)0x00000000)
+#define SAI_SLOTACTIVE_0 ((uint32_t)0x00010000)
+#define SAI_SLOTACTIVE_1 ((uint32_t)0x00020000)
+#define SAI_SLOTACTIVE_2 ((uint32_t)0x00040000)
+#define SAI_SLOTACTIVE_3 ((uint32_t)0x00080000)
+#define SAI_SLOTACTIVE_4 ((uint32_t)0x00100000)
+#define SAI_SLOTACTIVE_5 ((uint32_t)0x00200000)
+#define SAI_SLOTACTIVE_6 ((uint32_t)0x00400000)
+#define SAI_SLOTACTIVE_7 ((uint32_t)0x00800000)
+#define SAI_SLOTACTIVE_8 ((uint32_t)0x01000000)
+#define SAI_SLOTACTIVE_9 ((uint32_t)0x02000000)
+#define SAI_SLOTACTIVE_10 ((uint32_t)0x04000000)
+#define SAI_SLOTACTIVE_11 ((uint32_t)0x08000000)
+#define SAI_SLOTACTIVE_12 ((uint32_t)0x10000000)
+#define SAI_SLOTACTIVE_13 ((uint32_t)0x20000000)
+#define SAI_SLOTACTIVE_14 ((uint32_t)0x40000000)
+#define SAI_SLOTACTIVE_15 ((uint32_t)0x80000000)
+#define SAI_SLOTACTIVE_ALL ((uint32_t)0xFFFF0000)
+
+#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((ACTIVE) != 0)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Mono_Stereo_Mode
+ * @{
+ */
+#define SAI_MONOMODE ((uint32_t)SAI_xCR1_MONO)
+#define SAI_STREOMODE ((uint32_t)0x00000000)
+
+#define IS_SAI_BLOCK_MONO_STREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\
+ ((MODE) == SAI_STREOMODE))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_TRIState_Management
+ * @{
+ */
+#define SAI_OUTPUT_NOTRELEASED ((uint32_t)0x00000000)
+#define SAI_OUTPUT_RELEASED ((uint32_t)SAI_xCR2_TRIS)
+
+#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\
+ ((STATE) == SAI_OUTPUT_RELEASED))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Threshold
+ * @{
+ */
+#define SAI_FIFOTHRESHOLD_EMPTY ((uint32_t)0x00000000)
+#define SAI_FIFOTHRESHOLD_1QF ((uint32_t)0x00000001)
+#define SAI_FIFOTHRESHOLD_HF ((uint32_t)0x00000002)
+#define SAI_FIFOTHRESHOLD_3QF ((uint32_t)0x00000003)
+#define SAI_FIFOTHRESHOLD_FULL ((uint32_t)0x00000004)
+
+#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Companding_Mode
+ * @{
+ */
+#define SAI_NOCOMPANDING ((uint32_t)0x00000000)
+#define SAI_ULAW_1CPL_COMPANDING ((uint32_t)0x00008000)
+#define SAI_ALAW_1CPL_COMPANDING ((uint32_t)0x0000C000)
+#define SAI_ULAW_2CPL_COMPANDING ((uint32_t)0x0000A000)
+#define SAI_ALAW_2CPL_COMPANDING ((uint32_t)0x0000E000)
+
+#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \
+ ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_2CPL_COMPANDING))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mute_Value
+ * @{
+ */
+#define SAI_ZERO_VALUE ((uint32_t)0x00000000)
+#define SAI_LAST_SENT_VALUE ((uint32_t)SAI_xCR2_MUTEVAL)
+
+#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \
+ ((VALUE) == SAI_LAST_SENT_VALUE))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mute_Frame_Counter
+ * @{
+ */
+#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Interrupts_Definition
+ * @{
+ */
+#define SAI_IT_OVRUDR ((uint32_t)SAI_xIMR_OVRUDRIE)
+#define SAI_IT_MUTEDET ((uint32_t)SAI_xIMR_MUTEDETIE)
+#define SAI_IT_WCKCFG ((uint32_t)SAI_xIMR_WCKCFGIE)
+#define SAI_IT_FREQ ((uint32_t)SAI_xIMR_FREQIE)
+#define SAI_IT_CNRDY ((uint32_t)SAI_xIMR_CNRDYIE)
+#define SAI_IT_AFSDET ((uint32_t)SAI_xIMR_AFSDETIE)
+#define SAI_IT_LFSDET ((uint32_t)SAI_xIMR_LFSDETIE)
+
+#define IS_SAI_BLOCK_CONFIG_IT(IT) (((IT) == SAI_IT_OVRUDR) || \
+ ((IT) == SAI_IT_MUTEDET) || \
+ ((IT) == SAI_IT_WCKCFG) || \
+ ((IT) == SAI_IT_FREQ) || \
+ ((IT) == SAI_IT_CNRDY) || \
+ ((IT) == SAI_IT_AFSDET) || \
+ ((IT) == SAI_IT_LFSDET))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Flags_Definition
+ * @{
+ */
+#define SAI_FLAG_OVRUDR ((uint32_t)SAI_xSR_OVRUDR)
+#define SAI_FLAG_MUTEDET ((uint32_t)SAI_xSR_MUTEDET)
+#define SAI_FLAG_WCKCFG ((uint32_t)SAI_xSR_WCKCFG)
+#define SAI_FLAG_FREQ ((uint32_t)SAI_xSR_FREQ)
+#define SAI_FLAG_CNRDY ((uint32_t)SAI_xSR_CNRDY)
+#define SAI_FLAG_AFSDET ((uint32_t)SAI_xSR_AFSDET)
+#define SAI_FLAG_LFSDET ((uint32_t)SAI_xSR_LFSDET)
+
+#define IS_SAI_BLOCK_GET_FLAG(FLAG) (((FLAG) == SAI_FLAG_OVRUDR) || \
+ ((FLAG) == SAI_FLAG_MUTEDET) || \
+ ((FLAG) == SAI_FLAG_WCKCFG) || \
+ ((FLAG) == SAI_FLAG_FREQ) || \
+ ((FLAG) == SAI_FLAG_CNRDY) || \
+ ((FLAG) == SAI_FLAG_AFSDET) || \
+ ((FLAG) == SAI_FLAG_LFSDET))
+
+#define IS_SAI_BLOCK_CLEAR_FLAG(FLAG) (((FLAG) == SAI_FLAG_OVRUDR) || \
+ ((FLAG) == SAI_FLAG_MUTEDET) || \
+ ((FLAG) == SAI_FLAG_WCKCFG) || \
+ ((FLAG) == SAI_FLAG_FREQ) || \
+ ((FLAG) == SAI_FLAG_CNRDY) || \
+ ((FLAG) == SAI_FLAG_AFSDET) || \
+ ((FLAG) == SAI_FLAG_LFSDET))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Status_Level
+ * @{
+ */
+#define SAI_FIFOStatus_Empty ((uint32_t)0x00000000)
+#define SAI_FIFOStatus_Less1QuarterFull ((uint32_t)0x00010000)
+#define SAI_FIFOStatus_1QuarterFull ((uint32_t)0x00020000)
+#define SAI_FIFOStatus_HalfFull ((uint32_t)0x00030000)
+#define SAI_FIFOStatus_3QuartersFull ((uint32_t)0x00040000)
+#define SAI_FIFOStatus_Full ((uint32_t)0x00050000)
+
+#define IS_SAI_BLOCK_FIFO_STATUS(STATUS) (((STATUS) == SAI_FIFOStatus_Less1QuarterFull ) || \
+ ((STATUS) == SAI_FIFOStatus_HalfFull) || \
+ ((STATUS) == SAI_FIFOStatus_1QuarterFull) || \
+ ((STATUS) == SAI_FIFOStatus_3QuartersFull) || \
+ ((STATUS) == SAI_FIFOStatus_Full) || \
+ ((STATUS) == SAI_FIFOStatus_Empty))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @brief Reset SAI handle state
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval None
+ */
+#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET)
+
+/** @brief Enable or disable the specified SAI interrupts.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable
+ * @arg SAI_IT_MUTEDET: Mute detection interrupt enable
+ * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable
+ * @arg SAI_IT_FREQ: FIFO request interrupt enable
+ * @arg SAI_IT_CNRDY: Codec not ready interrupt enable
+ * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable
+ * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enabl
+ * @retval None
+ */
+
+#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified SAI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral.
+ * @param __INTERRUPT__: specifies the SAI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_TXE: Tx buffer empty interrupt enable.
+ * @arg SAI_IT_RXNE: Rx buffer not empty interrupt enable.
+ * @arg SAI_IT_ERR: Error interrupt enable.
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SAI flag is set or not.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_FLAG_OVRUDR: Overrun underrun flag.
+ * @arg SAI_FLAG_MUTEDET: Mute detection flag.
+ * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag.
+ * @arg SAI_FLAG_FREQ: FIFO request flag.
+ * @arg SAI_FLAG_CNRDY: Codec not ready flag.
+ * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag.
+ * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified SAI pending flag.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun
+ * @arg SAI_FLAG_MUTEDET: Clear Mute detection
+ * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration
+ * @arg SAI_FLAG_FREQ: Clear FIFO request
+ * @arg SAI_FLAG_CNRDY: Clear Codec not ready
+ * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection
+ * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection
+ *
+ * @retval None
+ */
+#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__))
+
+#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN)
+#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DeInit (SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai);
+
+/* I/O operation functions *****************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai);
+
+/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
+
+/* Peripheral State functions **************************************************/
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai);
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai);
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_sd.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,699 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sd.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SD_H
+#define __STM32F4xx_HAL_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_sdmmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SD_Exported_Types
+ * @{
+ */
+#define SD_InitTypeDef SDIO_InitTypeDef
+#define SD_TypeDef SDIO_TypeDef
+
+/**
+ * @brief SDIO Handle Structure definition
+ */
+typedef struct
+{
+ SD_TypeDef *Instance; /*!< SDIO register base address */
+
+ SD_InitTypeDef Init; /*!< SD required parameters */
+
+ HAL_LockTypeDef Lock; /*!< SD locking object */
+
+ uint32_t CardType; /*!< SD card type */
+
+ uint32_t RCA; /*!< SD relative card address */
+
+ uint32_t CSD[4]; /*!< SD card specific data table */
+
+ uint32_t CID[4]; /*!< SD card identification number table */
+
+ __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */
+
+ __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */
+
+ __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */
+
+ __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
+
+}SD_HandleTypeDef;
+
+/**
+ * @brief Card Specific Data: CSD Register
+ */
+typedef struct
+{
+ __IO uint8_t CSDStruct; /*!< CSD structure */
+ __IO uint8_t SysSpecVersion; /*!< System specification version */
+ __IO uint8_t Reserved1; /*!< Reserved */
+ __IO uint8_t TAAC; /*!< Data read access time 1 */
+ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
+ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
+ __IO uint16_t CardComdClasses; /*!< Card command classes */
+ __IO uint8_t RdBlockLen; /*!< Max. read data block length */
+ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
+ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
+ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
+ __IO uint8_t DSRImpl; /*!< DSR implemented */
+ __IO uint8_t Reserved2; /*!< Reserved */
+ __IO uint32_t DeviceSize; /*!< Device Size */
+ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
+ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
+ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
+ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
+ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
+ __IO uint8_t EraseGrSize; /*!< Erase group size */
+ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
+ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
+ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
+ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
+ __IO uint8_t WrSpeedFact; /*!< Write speed factor */
+ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
+ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
+ __IO uint8_t Reserved3; /*!< Reserved */
+ __IO uint8_t ContentProtectAppli; /*!< Content protection application */
+ __IO uint8_t FileFormatGrouop; /*!< File format group */
+ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
+ __IO uint8_t PermWrProtect; /*!< Permanent write protection */
+ __IO uint8_t TempWrProtect; /*!< Temporary write protection */
+ __IO uint8_t FileFormat; /*!< File format */
+ __IO uint8_t ECC; /*!< ECC code */
+ __IO uint8_t CSD_CRC; /*!< CSD CRC */
+ __IO uint8_t Reserved4; /*!< Always 1 */
+
+}HAL_SD_CSDTypedef;
+
+/**
+ * @brief Card Identification Data: CID Register
+ */
+typedef struct
+{
+ __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
+ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
+ __IO uint32_t ProdName1; /*!< Product Name part1 */
+ __IO uint8_t ProdName2; /*!< Product Name part2 */
+ __IO uint8_t ProdRev; /*!< Product Revision */
+ __IO uint32_t ProdSN; /*!< Product Serial Number */
+ __IO uint8_t Reserved1; /*!< Reserved1 */
+ __IO uint16_t ManufactDate; /*!< Manufacturing Date */
+ __IO uint8_t CID_CRC; /*!< CID CRC */
+ __IO uint8_t Reserved2; /*!< Always 1 */
+
+}HAL_SD_CIDTypedef;
+
+/**
+ * @brief SD Card Status returned by ACMD13
+ */
+typedef struct
+{
+ __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */
+ __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */
+ __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */
+ __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */
+ __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */
+ __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */
+ __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */
+ __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */
+ __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */
+ __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */
+
+}HAL_SD_CardStatusTypedef;
+
+/**
+ * @brief SD Card information structure
+ */
+typedef struct
+{
+ HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */
+ HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */
+ uint64_t CardCapacity; /*!< Card capacity */
+ uint32_t CardBlockSize; /*!< Card block size */
+ uint16_t RCA; /*!< SD relative card address */
+ uint8_t CardType; /*!< SD card type */
+
+}HAL_SD_CardInfoTypedef;
+
+/**
+ * @brief SD Error status enumeration Structure definition
+ */
+typedef enum
+{
+/**
+ * @brief SD specific error defines
+ */
+ SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */
+ SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */
+ SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */
+ SD_DATA_TIMEOUT = (4), /*!< Data timeout */
+ SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */
+ SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */
+ SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */
+ SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */
+ SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */
+ SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
+ SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */
+ SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */
+ SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */
+ SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
+ SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */
+ SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */
+ SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */
+ SD_CC_ERROR = (18), /*!< Internal card controller error */
+ SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */
+ SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */
+ SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */
+ SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */
+ SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */
+ SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */
+ SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
+ SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */
+ SD_INVALID_VOLTRANGE = (27),
+ SD_ADDR_OUT_OF_RANGE = (28),
+ SD_SWITCH_ERROR = (29),
+ SD_SDIO_DISABLED = (30),
+ SD_SDIO_FUNCTION_BUSY = (31),
+ SD_SDIO_FUNCTION_FAILED = (32),
+ SD_SDIO_UNKNOWN_FUNCTION = (33),
+
+/**
+ * @brief Standard error defines
+ */
+ SD_INTERNAL_ERROR = (34),
+ SD_NOT_CONFIGURED = (35),
+ SD_REQUEST_PENDING = (36),
+ SD_REQUEST_NOT_APPLICABLE = (37),
+ SD_INVALID_PARAMETER = (38),
+ SD_UNSUPPORTED_FEATURE = (39),
+ SD_UNSUPPORTED_HW = (40),
+ SD_ERROR = (41),
+ SD_OK = (0)
+
+}HAL_SD_ErrorTypedef;
+
+/**
+ * @brief SD Transfer state enumeration structure
+ */
+typedef enum
+{
+ SD_TRANSFER_OK = 0, /*!< Transfer success */
+ SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */
+ SD_TRANSFER_ERROR = 2 /*!< Transfer failed */
+
+}HAL_SD_TransferStateTypedef;
+
+/**
+ * @brief SD Card State enumeration structure
+ */
+typedef enum
+{
+ SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */
+ SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */
+ SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */
+ SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */
+ SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */
+ SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */
+ SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */
+ SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */
+ SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */
+
+}HAL_SD_CardStateTypedef;
+
+/**
+ * @brief SD Operation enumeration structure
+ */
+typedef enum
+{
+ SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */
+ SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */
+ SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */
+ SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */
+
+}HAL_SD_OperationTypedef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SD_Exported_Constants
+ * @{
+ */
+
+/**
+ * @brief SD Commands Index
+ */
+#define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */
+#define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */
+#define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
+#define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */
+#define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */
+#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
+ operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
+#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */
+#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
+ and asks the card whether card supports voltage. */
+#define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
+#define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */
+#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */
+#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */
+#define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */
+#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14)
+#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */
+#define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands
+ (read, write, lock). Default block length is fixed to 512 Bytes. Not effective
+ for SDHS and SDXC. */
+#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by
+ STOP_TRANSMISSION command. */
+#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
+#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */
+#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */
+#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
+#define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */
+#define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */
+#define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */
+#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */
+#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */
+#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */
+#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */
+#define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command
+ system set by switch function command (CMD6). */
+#define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased.
+ Reserved for each command system set by switch function command (CMD6). */
+#define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */
+#define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
+ the SET_BLOCK_LEN command. */
+#define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather
+ than a standard command. */
+#define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card
+ for general purpose/application specific commands. */
+#define SD_CMD_NO_CMD ((uint8_t)64)
+
+/**
+ * @brief Following commands are SD Card Specific commands.
+ * SDIO_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
+ widths are given in SCR register. */
+#define SD_CMD_SD_APP_STAUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */
+#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
+ 32bit+CRC data block. */
+#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
+ send its operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
+#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */
+#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */
+#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */
+
+/**
+ * @brief Following commands are SD Card Specific security commands.
+ * SD_CMD_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */
+#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */
+
+/**
+ * @brief Supported SD Memory Cards
+ */
+#define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000)
+#define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001)
+#define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002)
+#define MULTIMEDIA_CARD ((uint32_t)0x00000003)
+#define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004)
+#define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005)
+#define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006)
+#define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007)
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SD_Exported_macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE()
+
+/**
+ * @brief Disable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE()
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE()
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE()
+
+/**
+ * @brief Enable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Disable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified SD flag is set or not.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SD FLAG (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Clear the SD's pending flags.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Check whether the specified SD interrupt has occurred or not.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SD IT (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__)
+
+/**
+ * @brief Clear the SD's interrupt pending bits.
+ * @param __HANDLE__ : SD Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SD_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup SD_Group1
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
+HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/** @addtogroup SD_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
+
+/* Non-Blocking mode: DMA */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup SD_Group3
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup SD_Group4
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_SD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_sdram.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,151 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sdram.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SDRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SDRAM_H
+#define __STM32F4xx_HAL_SDRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_fmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SDRAM
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/**
+ * @brief HAL SDRAM State structure definition
+ */
+typedef enum
+{
+ HAL_SDRAM_STATE_RESET = 0x00, /*!< SDRAM not yet initialized or disabled */
+ HAL_SDRAM_STATE_READY = 0x01, /*!< SDRAM initialized and ready for use */
+ HAL_SDRAM_STATE_BUSY = 0x02, /*!< SDRAM internal process is ongoing */
+ HAL_SDRAM_STATE_ERROR = 0x03, /*!< SDRAM error state */
+ HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04, /*!< SDRAM device write protected */
+ HAL_SDRAM_STATE_PRECHARGED = 0x05 /*!< SDRAM device precharged */
+
+}HAL_SDRAM_StateTypeDef;
+
+/**
+ * @brief SDRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_SDRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */
+
+ __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */
+
+ HAL_LockTypeDef Lock; /*!< SDRAM locking object */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SDRAM_HandleTypeDef;
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset SDRAM handle state
+ * @param __HANDLE__: specifies the SDRAM handle.
+ * @retval None
+ */
+#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
+
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+/* SDRAM Control functions *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
+
+/* SDRAM State functions ********************************************************/
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SDRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_smartcard.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,493 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SMARTCARD_H
+#define __STM32F4xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref SMARTCARD_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref SMARTCARD_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits).*/
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state.
+ This parameter can be a value of @ref SmartCard_NACK_State */
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief HAL SMARTCARD Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
+ HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_SMARTCARD_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_SMARTCARD_ErrorTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+
+ __IO HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SMARTCARD Error code */
+}SMARTCARD_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Word_Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) (((LENGTH) == SMARTCARD_WORDLENGTH_8B) || \
+ ((LENGTH) == SMARTCARD_WORDLENGTH_9B))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_1 ((uint32_t)0x00000000)
+#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define SMARTCARD_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_1) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_1_5) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_NONE ((uint32_t)0x00000000)
+#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_NONE) || \
+ ((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000)
+#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_NACK_State
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED ((uint32_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLED ((uint32_t)0x00000000)
+#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
+ ((NACK) == SMARTCARD_NACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_DMA_Requests
+ * @{
+ */
+
+#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT)
+#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR)
+
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_IDLE ((uint32_t)0x00000010)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Interrupt_definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR3 register
+
+ *
+ * @{
+ */
+#define SMARTCARD_IT_PE ((uint32_t)0x10000100)
+#define SMARTCARD_IT_TXE ((uint32_t)0x10000080)
+#define SMARTCARD_IT_TC ((uint32_t)0x10000040)
+#define SMARTCARD_IT_RXNE ((uint32_t)0x10000020)
+#define SMARTCARD_IT_IDLE ((uint32_t)0x10000010)
+#define SMARTCARD_IT_ERR ((uint32_t)0x20000001)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Flushs the Smartcard DR register
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
+ * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag.
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (OverRun
+ * error) flags are cleared by software sequence: a read operation to
+ * USART_SR register followed by a read operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ */
+#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the SMARTCARD PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->DR;}while(0)
+/** @brief Clear the SMARTCARD FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+
+/** @brief Enables or disables the specified SmartCard interrupts.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ */
+#define SMARTCARD_IT_MASK ((uint32_t)0x0000FFFF)
+#define __SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+#define __SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
+
+/** @brief Macros to enable or disable the SmartCard interface.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ */
+#define __SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Macros to enable or disable the SmartCard DMA request.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __REQUEST__: specifies the SmartCard DMA request.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+ * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+ */
+#define __SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__))
+#define __SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__))
+
+#define __DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define __DIVMANT(_PCLK_, _BAUD_) (__DIV((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ(_PCLK_, _BAUD_) (((__DIV((_PCLK_), (_BAUD_)) - (__DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __SMARTCARD_BRR(_PCLK_, _BAUD_) ((__DIVMANT((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+
+/* Peripheral State functions **************************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_spi.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,488 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPI_H
+#define __STM32F4xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint32_t Direction; /*!< Specifies the SPI Directional mode state.
+ This parameter can be a value of @ref SPI_Direction_mode */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+}SPI_InitTypeDef;
+
+/**
+ * @brief HAL SPI State structure definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00, /*!< SPI not yet initialized or disabled */
+ HAL_SPI_STATE_READY = 0x01, /*!< SPI initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02, /*!< SPI process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x03 /*!< SPI error state */
+
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief HAL SPI Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
+ HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
+ HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
+ HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
+ HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_SPI_ERROR_FLAG = 0x20 /*!< Flag: RXNE,TXE, BSY */
+
+}HAL_SPI_ErrorTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /* SPI registers base address */
+
+ SPI_InitTypeDef Init; /* SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SPI Tx transfer size */
+
+ uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SPI Rx transfer size */
+
+ uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA handle parameters */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+
+ HAL_LockTypeDef Lock; /* SPI locking object */
+
+ __IO HAL_SPI_StateTypeDef State; /* SPI communication state */
+
+ __IO HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+
+}SPI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SPI_mode
+ * @{
+ */
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction_mode
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size
+ * @{
+ */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000)
+#define SPI_DATASIZE_16BIT SPI_CR1_DFF
+
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLED SPI_CR2_FRF
+
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
+ ((MODE) == SPI_TIMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
+
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_configuration_definition
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Flag_definition
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE
+#define SPI_FLAG_TXE SPI_SR_TXE
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR
+#define SPI_FLAG_MODF SPI_SR_MODF
+#define SPI_FLAG_OVR SPI_SR_OVR
+#define SPI_FLAG_BSY SPI_SR_BSY
+#define SPI_FLAG_FRE SPI_SR_FRE
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset SPI handle state
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified SPI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the SPI CRCERR pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);}while(0)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+
+/** @brief Clear the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
+
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_SPE)
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+
+#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_BIDIOE)
+
+#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+
+/* Peripheral State and Control functions **************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+HAL_SPI_ErrorTypeDef HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_sram.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,152 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sram.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SRAM_H
+#define __STM32F4xx_HAL_SRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SRAM
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_SRAM_STATE_RESET = 0x00, /*!< SRAM not yet initialized or disabled */
+ HAL_SRAM_STATE_READY = 0x01, /*!< SRAM initialized and ready for use */
+ HAL_SRAM_STATE_BUSY = 0x02, /*!< SRAM internal process is ongoing */
+ HAL_SRAM_STATE_ERROR = 0x03, /*!< SRAM error state */
+ HAL_SRAM_STATE_PROTECTED = 0x04 /*!< SRAM peripheral NORSRAM device write protected */
+
+}HAL_SRAM_StateTypeDef;
+
+/**
+ * @brief SRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< SRAM locking object */
+
+ __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SRAM_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset SRAM handle state
+ * @param __HANDLE__: SRAM handle
+ * @retval None
+ */
+#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+
+/* SRAM Control functions ******************************************************/
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
+
+/* SRAM State functions *********************************************************/
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_tim.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1487 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_H
+#define __STM32F4xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources.
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity.
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler.
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state.
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources.
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity.
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler.
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State
+ * @{
+ */
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_State
+ * @{
+ */
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+
+#define IS_TIM_IT(IT) ((((IT) & 0xFFFFFF00) == 0x00000000) && ((IT) != 0x00000000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_UPDATE) || \
+ ((IT) == TIM_IT_CC1) || \
+ ((IT) == TIM_IT_CC2) || \
+ ((IT) == TIM_IT_CC3) || \
+ ((IT) == TIM_IT_CC4) || \
+ ((IT) == TIM_IT_COM) || \
+ ((IT) == TIM_IT_TRIGGER) || \
+ ((IT) == TIM_IT_BREAK))
+/**
+ * @}
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000)
+
+/** @defgroup TIM_DMA_sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source
+ * @{
+ */
+#define TIM_EventSource_Update TIM_EGR_UG
+#define TIM_EventSource_CC1 TIM_EGR_CC1G
+#define TIM_EventSource_CC2 TIM_EGR_CC2G
+#define TIM_EventSource_CC3 TIM_EGR_CC3G
+#define TIM_EventSource_CC4 TIM_EGR_CC4G
+#define TIM_EventSource_COM TIM_EGR_COMG
+#define TIM_EventSource_Trigger TIM_EGR_TG
+#define TIM_EventSource_Break TIM_EGR_BG
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+
+#define IS_TIM_FLAG(FLAG) (((FLAG) == TIM_FLAG_UPDATE) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_TRIGGER) || \
+ ((FLAG) == TIM_FLAG_BREAK) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Filter
+ * @{
+ */
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Filter
+ * @{
+ */
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Lock_level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+/**
+ * @}
+ */
+/** @defgroup TIM_AOE_Bit_Set_Reset
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Slave_Mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004)
+#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007)
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode
+ * @{
+ */
+
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Trigger_Selection
+ * @{
+ */
+#define TIM_TS_ITR0 ((uint32_t)0x0000)
+#define TIM_TS_ITR1 ((uint32_t)0x0010)
+#define TIM_TS_ITR2 ((uint32_t)0x0020)
+#define TIM_TS_ITR3 ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060)
+#define TIM_TS_ETRF ((uint32_t)0x0070)
+#define TIM_TS_NONE ((uint32_t)0xFFFF)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Filter
+ * @{
+ */
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+ /** @defgroup TIM_TI1_Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address
+ * @{
+ */
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_OR (0x00000013)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length
+ * @{
+ */
+#define TIM_DMABurstLength_1Transfer (0x00000000)
+#define TIM_DMABurstLength_2Transfers (0x00000100)
+#define TIM_DMABurstLength_3Transfers (0x00000200)
+#define TIM_DMABurstLength_4Transfers (0x00000300)
+#define TIM_DMABurstLength_5Transfers (0x00000400)
+#define TIM_DMABurstLength_6Transfers (0x00000500)
+#define TIM_DMABurstLength_7Transfers (0x00000600)
+#define TIM_DMABurstLength_8Transfers (0x00000700)
+#define TIM_DMABurstLength_9Transfers (0x00000800)
+#define TIM_DMABurstLength_10Transfers (0x00000900)
+#define TIM_DMABurstLength_11Transfers (0x00000A00)
+#define TIM_DMABurstLength_12Transfers (0x00000B00)
+#define TIM_DMABurstLength_13Transfers (0x00000C00)
+#define TIM_DMABurstLength_14Transfers (0x00000D00)
+#define TIM_DMABurstLength_15Transfers (0x00000E00)
+#define TIM_DMABurstLength_16Transfers (0x00000F00)
+#define TIM_DMABurstLength_17Transfers (0x00001000)
+#define TIM_DMABurstLength_18Transfers (0x00001100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value
+ * @{
+ */
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/* The Main Output of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_DIRECTION_STATUS(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_PRESCALER (__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define __HAL_TIM_SetICPrescalerValue(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define __HAL_TIM_ResetICPrescalerValue(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCounter(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetCounter(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetAutoreload(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetAutoreload(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SetClockDivision(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetClockDivision(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SetICPrescaler(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ __HAL_TIM_ResetICPrescalerValue((__HANDLE__), (__CHANNEL__)); \
+ __HAL_TIM_SetICPrescalerValue((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GetICPrescaler(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extension module */
+#include "stm32f4xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_tim_ex.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,233 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of TIM HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_EX_H
+#define __STM32F4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode.
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level.
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State.
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity.
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+}TIM_BreakDeadTimeConfigTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap
+ * @{
+ */
+
+#define TIM_TIM2_TIM8_TRGO (0x00000000)
+#define TIM_TIM2_ETH_PTP (0x00000400)
+#define TIM_TIM2_USBFS_SOF (0x00000800)
+#define TIM_TIM2_USBHS_SOF (0x00000C00)
+#define TIM_TIM5_GPIO (0x00000000)
+#define TIM_TIM5_LSI (0x00000040)
+#define TIM_TIM5_LSE (0x00000080)
+#define TIM_TIM5_RTC (0x000000C0)
+#define TIM_TIM11_GPIO (0x00000000)
+#define TIM_TIM11_HSE (0x00000002)
+
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM5_LSI)||\
+ ((TIM_REMAP) == TIM_TIM5_LSE)||\
+ ((TIM_REMAP) == TIM_TIM5_RTC)||\
+ ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM11_HSE))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Extnsion Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_uart.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,609 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_UART_H
+#define __STM32F4xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
+ Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies wether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+}UART_InitTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_UART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief HAL UART Error Code structure definition
+ */
+typedef enum
+{
+ HAL_UART_ERROR_NONE = 0x00, /*!< No error */
+ HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_UART_ERROR_FE = 0x04, /*!< frame error */
+ HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_UART_ErrorTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* UART registers base address */
+
+ UART_InitTypeDef Init; /* UART communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* UART Tx Transfer size */
+
+ uint16_t TxXferCount; /* UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* UART Rx Transfer size */
+
+ uint16_t RxXferCount; /* UART Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_UART_StateTypeDef State; /* UART communication state */
+
+ __IO HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
+
+}UART_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants
+ * @{
+ */
+
+/** @defgroup UART_Word_Length
+ * @{
+ */
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x00000000)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x00000000)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x00000000)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x00000000)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection_Length
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020)
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_functions
+ * @{
+ */
+#define UART_WAKEUPMETHODE_IDLELINE ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHODE_ADDRESSMARK ((uint32_t)0x00000800)
+#define IS_UART_WAKEUPMETHODE(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHODE_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHODE_ADDRESSMARK))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define UART_FLAG_CTS ((uint32_t)0x00000200)
+#define UART_FLAG_LBD ((uint32_t)0x00000100)
+#define UART_FLAG_TXE ((uint32_t)0x00000080)
+#define UART_FLAG_TC ((uint32_t)0x00000040)
+#define UART_FLAG_RXNE ((uint32_t)0x00000020)
+#define UART_FLAG_IDLE ((uint32_t)0x00000010)
+#define UART_FLAG_ORE ((uint32_t)0x00000008)
+#define UART_FLAG_NE ((uint32_t)0x00000004)
+#define UART_FLAG_FE ((uint32_t)0x00000002)
+#define UART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+#define UART_IT_PE ((uint32_t)0x10000100)
+#define UART_IT_TXE ((uint32_t)0x10000080)
+#define UART_IT_TC ((uint32_t)0x10000040)
+#define UART_IT_RXNE ((uint32_t)0x10000020)
+#define UART_IT_IDLE ((uint32_t)0x10000010)
+
+#define UART_IT_LBD ((uint32_t)0x20000040)
+#define UART_IT_CTS ((uint32_t)0x30000400)
+
+#define UART_IT_ERR ((uint32_t)0x30000001)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset UART handle state
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief Flushs the UART DR register
+ * @param __HANDLE__: specifies the UART Handle.
+ */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: OverRun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified UART pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg UART_FLAG_LBD: LIN Break detection flag.
+ * @arg UART_FLAG_TC: Transmission Complete flag.
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the UART PE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->DR;}while(0)
+/** @brief Clear the UART FE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified UART interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define UART_IT_MASK ((uint32_t)0x0000FFFF)
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+
+/** @brief Enable CTS flow control
+ * This macro allows to enable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+ } while(0)
+
+/** @brief Disable CTS flow control
+ * This macro allows to disable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+ } while(0)
+
+/** @brief Enable RTS flow control
+ * This macro allows to enable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+ } while(0)
+
+/** @brief Disable RTS flow control
+ * This macro allows to disable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+ } while(0)
+
+/** @brief macros to enables or disables the UART's one bit sampling method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONEBIT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+#define __HAL_UART_ONEBIT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define __DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (__DIV_SAMPLING16((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((__DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (__DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((__DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_)))
+#define __DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (__DIV_SAMPLING8((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((__DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (__DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((__DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethode);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+
+/* Peripheral State functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_usart.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,490 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_USART_H
+#define __STM32F4xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief HAL USART Error Code structure definition
+ */
+typedef enum
+{
+ HAL_USART_ERROR_NONE = 0x00, /*!< No error */
+ HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_USART_ERROR_FE = 0x04, /*!< frame error */
+ HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_USART_ErrorTypeDef;
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ USART_InitTypeDef Init; /* Usart communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to Usart Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* Usart Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /* Usart Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to Usart Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* Usart Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /* Usart Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* Usart Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* Usart Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_USART_StateTypeDef State; /* Usart communication state */
+
+ __IO HAL_USART_ErrorTypeDef ErrorCode; /* USART Error code */
+
+}USART_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants
+ * @{
+ */
+
+/** @defgroup USART_Word_Length
+ * @{
+ */
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x00000000)
+#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_0_5) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x00000000)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLED ((uint32_t)0x00000000)
+#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
+ ((CLOCK) == USART_CLOCK_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x00000000)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x00000000)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x00000000)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_NACK_State
+ * @{
+ */
+#define USARTNACK_ENABLED ((uint32_t)USART_CR3_NACK)
+#define USARTNACK_DISABLED ((uint32_t)0x00000000)
+#define IS_USART_NACK_STATE(NACK) (((NACK) == USARTNACK_ENABLED) || \
+ ((NACK) == USARTNACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+
+#define USART_FLAG_TXE ((uint32_t)0x00000080)
+#define USART_FLAG_TC ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010)
+#define USART_FLAG_ORE ((uint32_t)0x00000008)
+#define USART_FLAG_NE ((uint32_t)0x00000004)
+#define USART_FLAG_FE ((uint32_t)0x00000002)
+#define USART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+#define USART_IT_PE ((uint32_t)0x10000100)
+#define USART_IT_TXE ((uint32_t)0x10000080)
+#define USART_IT_TC ((uint32_t)0x10000040)
+#define USART_IT_RXNE ((uint32_t)0x10000020)
+#define USART_IT_IDLE ((uint32_t)0x10000010)
+
+#define USART_IT_LBD ((uint32_t)0x20000040)
+#define USART_IT_CTS ((uint32_t)0x30000400)
+
+#define USART_IT_ERR ((uint32_t)0x30000001)
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @brief Reset USART handle state
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the USART PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->DR;}while(0)
+/** @brief Clear the USART FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified Usart interrupts.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified Usart interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define USART_IT_MASK ((uint32_t)0x0000FFFF)
+#define __USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK)))
+#define __USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK)))
+
+
+/** @brief Checks whether the specified Usart interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK))
+
+#define __USART_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __USART_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+#define __DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define __DIVMANT(_PCLK_, _BAUD_) (__DIV((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ(_PCLK_, _BAUD_) (((__DIV((_PCLK_), (_BAUD_)) - (__DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __USART_BRR(_PCLK_, _BAUD_) ((__DIVMANT((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+
+/* Peripheral State functions **************************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_wwdg.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,268 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_WWDG_H
+#define __STM32F4xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief WWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_WWDG_STATE_RESET = 0x00, /*!< WWDG not yet initialized or disabled */
+ HAL_WWDG_STATE_READY = 0x01, /*!< WWDG initialized and ready for use */
+ HAL_WWDG_STATE_BUSY = 0x02, /*!< WWDG internal process is ongoing */
+ HAL_WWDG_STATE_TIMEOUT = 0x03, /*!< WWDG timeout state */
+ HAL_WWDG_STATE_ERROR = 0x04 /*!< WWDG error state */
+}HAL_WWDG_StateTypeDef;
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number lower than Max_Data = 0x80 */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+}WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< WWDG locking object */
+
+ __IO HAL_WWDG_StateTypeDef State; /*!< WWDG communication state */
+
+}WWDG_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup WWDG_BitAddress_AliasRegion
+ * @brief WWDG registers bit address in the alias region
+ * @{
+ */
+
+/* --- CFR Register ---*/
+/* Alias word address of EWI bit */
+#define CFR_BASE (uint32_t)(WWDG_BASE + 0x04)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Interrupt_definition
+ * @{
+ */
+#define WWDG_IT_EWI ((uint32_t)WWDG_CFR_EWI)
+
+#define IS_WWDG_IT(__IT__) ((__IT__) == WWDG_IT_EWI)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF ((uint32_t)WWDG_SR_EWIF) /*!< Early wakeup interrupt flag */
+#define IS_WWDG_FLAG(__FLAG__) ((__FLAG__) == WWDG_FLAG_EWIF))
+
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 ((uint32_t)WWDG_CFR_WDGTB0) /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 ((uint32_t)WWDG_CFR_WDGTB1) /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 ((uint32_t)WWDG_CFR_WDGTB) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Window
+ * @{
+ */
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Counter
+ * @{
+ */
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset WWDG handle state
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+ * @brief Enables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+ * @brief Gets the selected WWDG's flag status.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __INTERRUPT__: specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__INTERRUPT__) (*(__IO uint32_t *) CFR_BASE |= (__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+
+/* Peripheral State functions **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_ll_fmc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1379 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fmc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FMC_H
+#define __STM32F4xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMC
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
+#define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef
+#define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef
+#define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef
+
+#define FMC_NORSRAM_DEVICE FMC_Bank1
+#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E
+#define FMC_NAND_DEVICE FMC_Bank2_3
+#define FMC_PCCARD_DEVICE FMC_Bank4
+#define FMC_SDRAM_DEVICE FMC_Bank5_6
+
+/**
+ * @brief FMC_NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FMC_Wrap_Mode */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
+ This parameter can be a value of @ref FMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
+
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FMC_NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FMC_Access_Mode */
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/**
+ * @brief FMC_NAND_PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_PCCARD_InitTypeDef;
+
+/**
+ * @brief FMC_SDRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_SDRAM_Bank */
+
+ uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
+
+ uint32_t RowBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */
+
+ uint32_t MemoryDataWidth; /*!< Defines the memory device width.
+ This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */
+
+ uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks.
+ This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */
+
+ uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
+ This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */
+
+ uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode.
+ This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */
+
+ uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow
+ to disable the clock before changing frequency.
+ This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */
+
+ uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read
+ commands during the CAS latency and stores data in the Read FIFO.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */
+
+ uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */
+}FMC_SDRAM_InitTypeDef;
+
+/**
+ * @brief FMC_SDRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and
+ an active or Refresh command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to
+ issuing the Activate command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock
+ cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command
+ and the delay between two consecutive Refresh commands in number of
+ memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command
+ in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write
+ command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+}FMC_SDRAM_TimingTypeDef;
+
+/**
+ * @brief SDRAM command parameters structure definition
+ */
+typedef struct
+{
+ uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */
+
+ uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Target. */
+
+ uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued
+ in auto refresh mode.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+ uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */
+}FMC_SDRAM_CommandTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMC_NOR_SRAM_Controller
+ * @{
+ */
+
+/** @defgroup FMC_NORSRAM_Bank
+ * @{
+ */
+#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
+#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
+#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+
+#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
+ ((BANK) == FMC_NORSRAM_BANK2) || \
+ ((BANK) == FMC_NORSRAM_BANK3) || \
+ ((BANK) == FMC_NORSRAM_BANK4))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing
+ * @{
+ */
+#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
+#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FMC_MUX(MUX) (((MUX) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((MUX) == FMC_DATA_ADDRESS_MUX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Memory_Type
+ * @{
+ */
+#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
+#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
+#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
+
+#define IS_FMC_MEMORY(MEMORY) (((MEMORY) == FMC_MEMORY_TYPE_SRAM) || \
+ ((MEMORY) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((MEMORY) == FMC_MEMORY_TYPE_NOR))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Data_Width
+ * @{
+ */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Flash_Access
+ * @{
+ */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Burst_Access_Mode
+ * @{
+ */
+#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
+
+#define IS_FMC_BURSTMODE(STATE) (((STATE) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((STATE) == FMC_BURST_ACCESS_MODE_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup FMC_Wait_Signal_Polarity
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
+
+#define IS_FMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((POLARITY) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wrap_Mode
+ * @{
+ */
+#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400)
+
+#define IS_FMC_WRAP_MODE(MODE) (((MODE) == FMC_WRAP_MODE_DISABLE) || \
+ ((MODE) == FMC_WRAP_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Timing
+ * @{
+ */
+#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
+#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FMC_WAIT_TIMING_BEFORE_WS) || \
+ ((ACTIVE) == FMC_WAIT_TIMING_DURING_WS))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Operation
+ * @{
+ */
+#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
+
+#define IS_FMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FMC_WRITE_OPERATION_DISABLE) || \
+ ((OPERATION) == FMC_WRITE_OPERATION_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
+
+#define IS_FMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FMC_WAIT_SIGNAL_DISABLE) || \
+ ((SIGNAL) == FMC_WAIT_SIGNAL_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Extended_Mode
+ * @{
+ */
+#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
+
+#define IS_FMC_EXTENDED_MODE(MODE) (((MODE) == FMC_EXTENDED_MODE_DISABLE) || \
+ ((MODE) == FMC_EXTENDED_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_AsynchronousWait
+ * @{
+ */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
+
+#define IS_FMC_ASYNWAIT(STATE) (((STATE) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((STATE) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Burst
+ * @{
+ */
+#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
+
+#define IS_FMC_WRITE_BURST(BURST) (((BURST) == FMC_WRITE_BURST_DISABLE) || \
+ ((BURST) == FMC_WRITE_BURST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Continous_Clock
+ * @{
+ */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
+
+#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Address_Setup_Time
+ * @{
+ */
+#define IS_FMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Address_Hold_Time
+ * @{
+ */
+#define IS_FMC_ADDRESS_HOLD_TIME(TIME) (((TIME) > 0) && ((TIME) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Setup_Time
+ * @{
+ */
+#define IS_FMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 255))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Bus_Turn_around_Duration
+ * @{
+ */
+#define IS_FMC_TURNAROUND_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_CLK_Division
+ * @{
+ */
+#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Latency
+ * @{
+ */
+#define IS_FMC_DATA_LATENCY(LATENCY) (((LATENCY) > 1) && ((LATENCY) <= 17))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Access_Mode
+ * @{
+ */
+#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000)
+#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000)
+#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000)
+#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000)
+
+#define IS_FMC_ACCESS_MODE(MODE) (((MODE) == FMC_ACCESS_MODE_A) || \
+ ((MODE) == FMC_ACCESS_MODE_B) || \
+ ((MODE) == FMC_ACCESS_MODE_C) || \
+ ((MODE) == FMC_ACCESS_MODE_D))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Controller
+ * @{
+ */
+
+/** @defgroup FMC_NAND_Bank
+ * @{
+ */
+#define FMC_NAND_BANK2 ((uint32_t)0x00000010)
+#define FMC_NAND_BANK3 ((uint32_t)0x00000100)
+
+#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \
+ ((BANK) == FMC_NAND_BANK3))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_feature
+ * @{
+ */
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCR_Memory_Type
+ * @{
+ */
+#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
+#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Data_Width
+ * @{
+ */
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+
+#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC
+ * @{
+ */
+#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
+
+#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FMC_NAND_ECC_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC_Page_Size
+ * @{
+ */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
+
+#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_TCLR_Setup_Time
+ * @{
+ */
+#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_TAR_Setup_Time
+ * @{
+ */
+#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Setup_Time
+ * @{
+ */
+#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Setup_Time
+ * @{
+ */
+#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Hold_Setup_Time
+ * @{
+ */
+#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_HiZ_Setup_Time
+ * @{
+ */
+#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Controller
+ * @{
+ */
+
+/** @defgroup FMC_SDRAM_Bank
+ * @{
+ */
+#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000)
+#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001)
+
+#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \
+ ((BANK) == FMC_SDRAM_BANK2))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Column_Bits_number
+ * @{
+ */
+#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000)
+#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001)
+#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002)
+#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003)
+
+#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Row_Bits_number
+ * @{
+ */
+#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000)
+#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004)
+#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008)
+
+#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_13))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Memory_Bus_Width
+ * @{
+ */
+#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+
+#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Internal_Banks_Number
+ * @{
+ */
+#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000)
+#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040)
+
+#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
+ ((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_CAS_Latency
+ * @{
+ */
+#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080)
+#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100)
+#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180)
+
+#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_3))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Write_Protection
+ * @{
+ */
+#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200)
+
+#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
+ ((WRITE) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Clock_Period
+ * @{
+ */
+#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800)
+#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00)
+
+#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDRAM_CLOCK_DISABLE) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_2) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_3))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Burst
+ * @{
+ */
+#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000)
+
+#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_SDRAM_RBURST_DISABLE) || \
+ ((RBURST) == FMC_SDRAM_RBURST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Pipe_Delay
+ * @{
+ */
+#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000)
+#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000)
+#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000)
+
+#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_SDRAM_RPIPE_DELAY_0) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_1) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_2))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_LoadToActive_Delay
+ * @{
+ */
+#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_ExitSelfRefresh_Delay
+ * @{
+ */
+#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_SelfRefresh_Time
+ * @{
+ */
+#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_RowCycle_Delay
+ * @{
+ */
+#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Write_Recovery_Time
+ * @{
+ */
+#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_RP_Delay
+ * @{
+ */
+#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_RCD_Delay
+ * @{
+ */
+#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Mode
+ * @{
+ */
+#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000)
+#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001)
+#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002)
+#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003)
+#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004)
+#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005)
+#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006)
+
+#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_SDRAM_CMD_NORMAL_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_CLK_ENABLE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_PALL) || \
+ ((COMMAND) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_LOAD_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_POWERDOWN_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Target
+ * @{
+ */
+#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2
+#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1
+#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018)
+
+#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK2) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1_2))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_AutoRefresh_Number
+ * @{
+ */
+#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0) && ((NUMBER) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_ModeRegister_Definition
+ * @{
+ */
+#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Refresh_rate
+ * @{
+ */
+#define IS_FMC_REFRESH_RATE(RATE) ((RATE) <= 8191)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Mode_Status
+ * @{
+ */
+#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000)
+#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0
+#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Device_Instance
+ * @{
+ */
+#define IS_FMC_NORSRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_NORSRAM_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_EXTENDED_Device_Instance
+ * @{
+ */
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(INSTANCE) ((INSTANCE) == FMC_NORSRAM_EXTENDED_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Device_Instance
+ * @{
+ */
+#define IS_FMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FMC_NAND_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCCARD_Device_Instance
+ * @{
+ */
+#define IS_FMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FMC_PCCARD_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Device_Instance
+ * @{
+ */
+#define IS_FMC_SDRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_SDRAM_DEVICE)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Interrupt_definition
+ * @brief FMC Interrupt definition
+ * @{
+ */
+#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008)
+#define FMC_IT_LEVEL ((uint32_t)0x00000010)
+#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
+#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000)
+
+#define IS_FMC_IT(IT) ((((IT) & (uint32_t)0xFFFFBFC7) == 0x00000000) && ((IT) != 0x00000000))
+
+#define IS_FMC_GET_IT(IT) (((IT) == FMC_IT_RISING_EDGE) || \
+ ((IT) == FMC_IT_LEVEL) || \
+ ((IT) == FMC_IT_FALLING_EDGE) || \
+ ((IT) == FMC_IT_REFRESH_ERROR))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Flag_definition
+ * @brief FMC Flag definition
+ * @{
+ */
+#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
+#define FMC_FLAG_LEVEL ((uint32_t)0x00000002)
+#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
+#define FMC_FLAG_FEMPT ((uint32_t)0x00000040)
+#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE
+#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY
+#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE
+
+#define IS_FMC_GET_FLAG(FLAG) (((FLAG) == FMC_FLAG_RISING_EDGE) || \
+ ((FLAG) == FMC_FLAG_LEVEL) || \
+ ((FLAG) == FMC_FLAG_FALLING_EDGE) || \
+ ((FLAG) == FMC_FLAG_FEMPT) || \
+ ((FLAG) == FMC_SDRAM_FLAG_REFRESH_IT) || \
+ ((FLAG) == FMC_SDRAM_FLAG_BUSY))
+
+#define IS_FMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FMC_NOR_Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCCARD_Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Interrupt
+ * @brief macros to handle FMC interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND handle
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND handle
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND handle
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+
+/**
+ * @brief Enable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
+ * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR
+ * @retval None
+ */
+#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* FMC_NORSRAM Controller functions *******************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+
+/* FMC_NORSRAM Control functions */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+
+/* FMC_NAND Controller functions **********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+
+/* FMC_NAND Control functions */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/* FMC_PCCARD Controller functions ********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
+
+/* FMC_SDRAM Controller functions *********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+
+/* FMC_SDRAM Control functions */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_ll_fsmc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,1048 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fsmc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FSMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FSMC_H
+#define __STM32F4xx_LL_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FSMC
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef
+#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef
+#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef
+
+#define FSMC_NORSRAM_DEVICE FSMC_Bank1
+#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E
+#define FSMC_NAND_DEVICE FSMC_Bank2_3
+#define FSMC_PCCARD_DEVICE FSMC_Bank4
+
+/**
+ * @brief FSMC_NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FSMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wrap_Mode */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC.
+ This parameter can be a value of @ref FSMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FSMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FSMC_Write_Burst */
+
+}FSMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FSMC_NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FSMC_Access_Mode */
+
+}FSMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FSMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FSMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FSMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FSMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_InitTypeDef;
+
+/**
+ * @brief FSMC_NAND_PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FSMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_PCCARD_InitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FSMC_NOR_SRAM_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_NORSRAM_Bank
+ * @{
+ */
+#define FSMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
+#define FSMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
+#define FSMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
+#define FSMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+
+#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_NORSRAM_BANK1) || \
+ ((BANK) == FSMC_NORSRAM_BANK2) || \
+ ((BANK) == FSMC_NORSRAM_BANK3) || \
+ ((BANK) == FSMC_NORSRAM_BANK4))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing
+ * @{
+ */
+
+#define FSMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
+#define FSMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((MUX) == FSMC_DATA_ADDRESS_MUX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Memory_Type
+ * @{
+ */
+
+#define FSMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
+#define FSMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
+#define FSMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
+
+
+#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MEMORY_TYPE_SRAM) || \
+ ((MEMORY) == FSMC_MEMORY_TYPE_PSRAM)|| \
+ ((MEMORY) == FSMC_MEMORY_TYPE_NOR))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Data_Width
+ * @{
+ */
+
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+
+#define IS_FSMC_NORSRAM_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FSMC_NORSRAM_MEM_BUS_WIDTH_32))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Flash_Access
+ * @{
+ */
+#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
+#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Burst_Access_Mode
+ * @{
+ */
+
+#define FSMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
+
+#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((STATE) == FSMC_BURST_ACCESS_MODE_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_Wait_Signal_Polarity
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
+#define FSMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
+
+#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((POLARITY) == FSMC_WAIT_SIGNAL_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wrap_Mode
+ * @{
+ */
+#define FSMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400)
+
+#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WRAP_MODE_DISABLE) || \
+ ((MODE) == FSMC_WRAP_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Timing
+ * @{
+ */
+#define FSMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
+#define FSMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
+
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WAIT_TIMING_BEFORE_WS) || \
+ ((ACTIVE) == FSMC_WAIT_TIMING_DURING_WS))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Operation
+ * @{
+ */
+#define FSMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
+
+#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WRITE_OPERATION_DISABLE) || \
+ ((OPERATION) == FSMC_WRITE_OPERATION_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
+
+#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WAIT_SIGNAL_DISABLE) || \
+ ((SIGNAL) == FSMC_WAIT_SIGNAL_ENABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Extended_Mode
+ * @{
+ */
+#define FSMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
+
+#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_EXTENDED_MODE_DISABLE) || \
+ ((MODE) == FSMC_EXTENDED_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_AsynchronousWait
+ * @{
+ */
+#define FSMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
+#define FSMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
+
+#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((STATE) == FSMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Burst
+ * @{
+ */
+
+#define FSMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
+
+#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WRITE_BURST_DISABLE) || \
+ ((BURST) == FSMC_WRITE_BURST_ENABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Continous_Clock
+ * @{
+ */
+
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
+
+#define IS_FSMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Setup_Time
+ * @{
+ */
+#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Hold_Time
+ * @{
+ */
+#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) (((TIME) > 0) && ((TIME) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Setup_Time
+ * @{
+ */
+#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 255))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Bus_Turn_around_Duration
+ * @{
+ */
+#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_CLK_Division
+ * @{
+ */
+#define IS_FSMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Latency
+ * @{
+ */
+#define IS_FSMC_DATA_LATENCY(LATENCY) (((LATENCY) > 1) && ((LATENCY) <= 17))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Access_Mode
+ * @{
+ */
+#define FSMC_ACCESS_MODE_A ((uint32_t)0x00000000)
+#define FSMC_ACCESS_MODE_B ((uint32_t)0x10000000)
+#define FSMC_ACCESS_MODE_C ((uint32_t)0x20000000)
+#define FSMC_ACCESS_MODE_D ((uint32_t)0x30000000)
+
+#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_ACCESS_MODE_A) || \
+ ((MODE) == FSMC_ACCESS_MODE_B) || \
+ ((MODE) == FSMC_ACCESS_MODE_C) || \
+ ((MODE) == FSMC_ACCESS_MODE_D))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_NAND_Bank
+ * @{
+ */
+#define FSMC_NAND_BANK2 ((uint32_t)0x00000010)
+#define FSMC_NAND_BANK3 ((uint32_t)0x00000100)
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_NAND_BANK2) || \
+ ((BANK) == FSMC_NAND_BANK3))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_feature
+ * @{
+ */
+#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCR_Memory_Type
+ * @{
+ */
+#define FSMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
+#define FSMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Data_Width
+ * @{
+ */
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+
+#define IS_FSMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC
+ * @{
+ */
+#define FSMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
+#define FSMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
+
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FSMC_NAND_ECC_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC_Page_Size
+ * @{
+ */
+#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
+#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
+#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
+#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
+#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
+#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
+
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TCLR_Setup_Time
+ * @{
+ */
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TAR_Setup_Time
+ * @{
+ */
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Setup_Time
+ * @{
+ */
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Setup_Time
+ * @{
+ */
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Hold_Setup_Time
+ * @{
+ */
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_HiZ_Setup_Time
+ * @{
+ */
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_NORSRAM_Device_Instance
+ * @{
+ */
+#define IS_FSMC_NORSRAM_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NORSRAM_DEVICE)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_EXTENDED_Device_Instance
+ * @{
+ */
+#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NORSRAM_EXTENDED_DEVICE)
+
+/**
+ * @}
+ */
+
+ /** @defgroup FSMC_NAND_Device_Instance
+ * @{
+ */
+#define IS_FSMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NAND_DEVICE)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCCARD_Device_Instance
+ * @{
+ */
+#define IS_FSMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FSMC_PCCARD_DEVICE)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Interrupt_definition
+ * @brief FSMC Interrupt definition
+ * @{
+ */
+#define FSMC_IT_RISING_EDGE ((uint32_t)0x00000008)
+#define FSMC_IT_LEVEL ((uint32_t)0x00000010)
+#define FSMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
+#define FSMC_IT_REFRESH_ERROR ((uint32_t)0x00004000)
+
+#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFBFC7) == 0x00000000) && ((IT) != 0x00000000))
+#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RISING_EDGE) || \
+ ((IT) == FSMC_IT_LEVEL) || \
+ ((IT) == FSMC_IT_FALLING_EDGE) || \
+ ((IT) == FSMC_IT_REFRESH_ERROR))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Flag_definition
+ * @brief FSMC Flag definition
+ * @{
+ */
+#define FSMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
+#define FSMC_FLAG_LEVEL ((uint32_t)0x00000002)
+#define FSMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040)
+
+#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RISING_EDGE) || \
+ ((FLAG) == FSMC_FLAG_LEVEL) || \
+ ((FLAG) == FSMC_FLAG_FALLING_EDGE) || \
+ ((FLAG) == FSMC_FLAG_FEMPT))
+
+#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+
+/** @defgroup FSMC_NOR_Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCR1_MBKEN)
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_NAND_Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN))
+
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FSMC_PCR3_PBKEN))
+
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCCARD_Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Interrupt
+ * @brief macros to handle FSMC interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __FLAG__: FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __FLAG__: FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* FSMC_NORSRAM Controller functions ******************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+
+/* FSMC_NORSRAM Control functions */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+
+/* FSMC_NAND Controller functions *********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+
+/* FSMC_NAND Control functions */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/* FSMC_PCCARD Controller functions *******************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device);
+
+/* FSMC APIs, macros and typedefs redefinition */
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef
+#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef
+
+#define FMC_NORSRAM_Init FSMC_NORSRAM_Init
+#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init
+#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init
+#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit
+#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable
+#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable
+
+#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE
+#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE
+
+#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef
+#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef
+#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef
+
+#define FMC_NAND_Init FSMC_NAND_Init
+#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init
+#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init
+#define FMC_NAND_DeInit FSMC_NAND_DeInit
+#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable
+#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable
+#define FMC_NAND_GetECC FSMC_NAND_GetECC
+#define FMC_PCCARD_Init FSMC_PCCARD_Init
+#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init
+#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init
+#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init
+#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit
+
+#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE
+#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE
+#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE
+#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE
+#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT
+#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT
+#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG
+#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG
+#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT
+#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT
+#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG
+#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG
+
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NAND_TypeDef FSMC_NAND_TypeDef
+#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef
+
+#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE
+#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE
+#define FMC_NAND_DEVICE FSMC_NAND_DEVICE
+#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE
+
+#define FMC_NAND_BANK2 FSMC_NAND_BANK2
+
+#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1
+#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2
+#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3
+
+#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE
+#define FMC_IT_LEVEL FSMC_IT_LEVEL
+#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE
+#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR
+
+#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE
+#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL
+#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE
+#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FSMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_ll_sdmmc.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,973 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_sdmmc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SDMMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_SDMMC_H
+#define __STM32F4xx_LL_SDMMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_Driver
+ * @{
+ */
+
+/** @addtogroup SDMMC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup SDIO_Exported_Types SDIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief SDMMC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+}SDIO_InitTypeDef;
+
+
+/**
+ * @brief SDIO Command Control structure
+ */
+typedef struct
+{
+ uint32_t Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register. */
+
+ uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and
+ Max_Data = 64 */
+
+ uint32_t Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+}SDIO_CmdInitTypeDef;
+
+
+/**
+ * @brief SDIO Data Control structure
+ */
+typedef struct
+{
+ uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+}SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SDIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge
+ * @{
+ */
+#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000)
+#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE
+
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
+ ((EDGE) == SDIO_CLOCK_EDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass
+ * @{
+ */
+#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS
+
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
+ ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save
+ * @{
+ */
+#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV
+
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
+ ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide
+ * @{
+ */
+#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000)
+#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0
+#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1
+
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \
+ ((WIDE) == SDIO_BUS_WIDE_4B) || \
+ ((WIDE) == SDIO_BUS_WIDE_8B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control
+ * @{
+ */
+#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000)
+#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN
+
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
+ ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Division
+ * @{
+ */
+#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index
+ * @{
+ */
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type
+ * @{
+ */
+#define SDIO_RESPONSE_NO ((uint32_t)0x00000000)
+#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0
+#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP
+
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \
+ ((RESPONSE) == SDIO_RESPONSE_SHORT) || \
+ ((RESPONSE) == SDIO_RESPONSE_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State
+ * @{
+ */
+#define SDIO_WAIT_NO ((uint32_t)0x00000000)
+#define SDIO_WAIT_IT SDIO_CMD_WAITINT
+#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND
+
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \
+ ((WAIT) == SDIO_WAIT_IT) || \
+ ((WAIT) == SDIO_WAIT_PEND))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State
+ * @{
+ */
+#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN
+
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
+ ((CPSM) == SDIO_CPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers
+ * @{
+ */
+#define SDIO_RESP1 ((uint32_t)0x00000000)
+#define SDIO_RESP2 ((uint32_t)0x00000004)
+#define SDIO_RESP3 ((uint32_t)0x00000008)
+#define SDIO_RESP4 ((uint32_t)0x0000000C)
+
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
+ ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || \
+ ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length
+ * @{
+ */
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size
+ * @{
+ */
+#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000)
+#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0
+#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1
+#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030)
+#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2
+#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050)
+#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060)
+#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070)
+#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3
+#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090)
+#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0)
+#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0)
+#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0)
+#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0)
+#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0)
+
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16384B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction
+ * @{
+ */
+#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR
+
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
+ ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type
+ * @{
+ */
+#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE
+
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
+ ((MODE) == SDIO_TRANSFER_MODE_STREAM))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State
+ * @{
+ */
+#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000)
+#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN
+
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
+ ((DPSM) == SDIO_DPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode
+ * @{
+ */
+#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000000)
+#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000001)
+
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
+ ((MODE) == SDIO_READ_WAIT_MODE_DATA2))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Interrupt_sources
+ * @{
+ */
+#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_IT_CMDREND SDIO_STA_CMDREND
+#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_IT_DATAEND SDIO_STA_DATAEND
+#define SDIO_IT_STBITERR SDIO_STA_STBITERR
+#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_IT_CMDACT SDIO_STA_CMDACT
+#define SDIO_IT_TXACT SDIO_STA_TXACT
+#define SDIO_IT_RXACT SDIO_STA_RXACT
+#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND
+
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags
+ * @{
+ */
+#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND
+#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND
+#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR
+#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT
+#define SDIO_FLAG_TXACT SDIO_STA_TXACT
+#define SDIO_FLAG_RXACT SDIO_STA_RXACT
+#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND
+
+#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_DCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_CTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_DTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_TXUNDERR) || \
+ ((FLAG) == SDIO_FLAG_RXOVERR) || \
+ ((FLAG) == SDIO_FLAG_CMDREND) || \
+ ((FLAG) == SDIO_FLAG_CMDSENT) || \
+ ((FLAG) == SDIO_FLAG_DATAEND) || \
+ ((FLAG) == SDIO_FLAG_STBITERR) || \
+ ((FLAG) == SDIO_FLAG_DBCKEND) || \
+ ((FLAG) == SDIO_FLAG_CMDACT) || \
+ ((FLAG) == SDIO_FLAG_TXACT) || \
+ ((FLAG) == SDIO_FLAG_RXACT) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOHE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOHF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_TXDAVL) || \
+ ((FLAG) == SDIO_FLAG_RXDAVL) || \
+ ((FLAG) == SDIO_FLAG_SDIOIT) || \
+ ((FLAG) == SDIO_FLAG_CEATAEND))
+
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
+
+#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \
+ ((IT) == SDIO_IT_DCRCFAIL) || \
+ ((IT) == SDIO_IT_CTIMEOUT) || \
+ ((IT) == SDIO_IT_DTIMEOUT) || \
+ ((IT) == SDIO_IT_TXUNDERR) || \
+ ((IT) == SDIO_IT_RXOVERR) || \
+ ((IT) == SDIO_IT_CMDREND) || \
+ ((IT) == SDIO_IT_CMDSENT) || \
+ ((IT) == SDIO_IT_DATAEND) || \
+ ((IT) == SDIO_IT_STBITERR) || \
+ ((IT) == SDIO_IT_DBCKEND) || \
+ ((IT) == SDIO_IT_CMDACT) || \
+ ((IT) == SDIO_IT_TXACT) || \
+ ((IT) == SDIO_IT_RXACT) || \
+ ((IT) == SDIO_IT_TXFIFOHE) || \
+ ((IT) == SDIO_IT_RXFIFOHF) || \
+ ((IT) == SDIO_IT_TXFIFOF) || \
+ ((IT) == SDIO_IT_RXFIFOF) || \
+ ((IT) == SDIO_IT_TXFIFOE) || \
+ ((IT) == SDIO_IT_RXFIFOE) || \
+ ((IT) == SDIO_IT_TXDAVL) || \
+ ((IT) == SDIO_IT_RXDAVL) || \
+ ((IT) == SDIO_IT_SDIOIT) || \
+ ((IT) == SDIO_IT_CEATAEND))
+
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SDIO_Instance_definition
+ * @{
+ */
+#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* ------------ SDIO registers bit address in the alias region -------------- */
+#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET (SDIO_OFFSET + 0x04)
+#define CLKEN_BitNumber 0x08
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4))
+
+/* --- CMD Register ---*/
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BitNumber 0x0B
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BitNumber 0x0C
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BitNumber 0x0D
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BitNumber 0x0E
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4))
+
+/* --- DCTRL Register ---*/
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C)
+#define DMAEN_BitNumber 0x03
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BitNumber 0x08
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BitNumber 0x09
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BitNumber 0x0A
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BitNumber 0x0B
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4))
+
+/* ---------------------- SDIO registers bit mask --------------------------- */
+/* --- CLKCR Register ---*/
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\
+ SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\
+ SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN))
+
+/* --- PWRCTRL Register ---*/
+/* --- DCTRL Register ---*/
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\
+ SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE))
+
+/* --- CMD Register ---*/
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\
+ SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\
+ SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND))
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14))
+
+/* SDIO Intialization Frequency (400KHz max) */
+#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
+
+/* SDIO Data Transfer Frequency (25MHz max) */
+#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
+
+/** @defgroup SDIO_Interrupt_Clock
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SDIO device.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO device.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified SDIO flag is set or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SDIO_FLAG (SET or RESET).
+ */
+#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
+
+
+/**
+ * @brief Clears the SDIO pending flags.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified SDIO interrupt has occurred or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SDIO_IT (SET or RESET).
+ */
+#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clears the SDIO's interrupt pending bits.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__))
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
+
+/**
+ * @brief Disable Start the SD I/O Read Wait operations.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
+
+/**
+ * @brief Disable Stop the SD I/O Read Wait operations.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Mode Operation.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Mode Operation.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Suspend command sending.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Suspend command sending.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
+
+/**
+ * @brief Enable the command completion signal.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
+
+/**
+ * @brief Disable the command completion signal.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
+
+/**
+ * @brief Enable the CE-ATA interrupt.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0)
+
+/**
+ * @brief Disable the CE-ATA interrupt.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1)
+
+/**
+ * @brief Enable send CE-ATA command (CMD61).
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
+
+/**
+ * @brief Disable send CE-ATA command (CMD61).
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDIO_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup HAL_SDIO_Group1
+ * @{
+ */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup HAL_SDIO_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ************************************************/
+/** @addtogroup HAL_SDIO_Group3
+ * @{
+ */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx);
+
+/* Command path state machine (CPSM) management functions */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+
+/* Data path state machine (DPSM) management functions */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx);
+
+/* SDIO IO Cards mode management functions */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_SDMMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_ll_usb.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,459 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of USB Core HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_USB_H
+#define __STM32F4xx_LL_USB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup USB_Core
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USB Mode definition
+ */
+typedef enum
+{
+ USB_OTG_DEVICE_MODE = 0,
+ USB_OTG_HOST_MODE = 1,
+ USB_OTG_DRD_MODE = 2
+
+}USB_OTG_ModeTypeDef;
+
+/**
+ * @brief URB States definition
+ */
+typedef enum {
+ URB_IDLE = 0,
+ URB_DONE,
+ URB_NOTREADY,
+ URB_NYET,
+ URB_ERROR,
+ URB_STALL
+
+}USB_OTG_URBStateTypeDef;
+
+/**
+ * @brief Host channel States definition
+ */
+typedef enum {
+ HC_IDLE = 0,
+ HC_XFRC,
+ HC_HALTED,
+ HC_NAK,
+ HC_NYET,
+ HC_STALL,
+ HC_XACTERR,
+ HC_BBLERR,
+ HC_DATATGLERR
+
+}USB_OTG_HCStateTypeDef;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t Host_channels; /*!< Host Channels number.
+ This parameter Depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref USB_EP0_MPS_ */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY_ */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
+
+ uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
+
+ uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
+
+ uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
+
+}USB_OTG_CfgTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint8_t data_pid_start; /*!< Initial data PID
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t even_odd_frame; /*!< IFrame parity
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint16_t tx_fifo_num; /*!< Transmission FIFO number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}USB_OTG_EPTypeDef;
+
+typedef struct
+{
+ uint8_t dev_addr ; /*!< USB device address.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
+
+ uint8_t ch_num; /*!< Host channel number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_num; /*!< Endpoint number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t speed; /*!< USB Host speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
+
+ uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
+
+ uint8_t ep_type; /*!< Endpoint Type.
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint16_t max_packet; /*!< Endpoint Max packet size.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t data_pid; /*!< Initial data PID.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
+
+ uint32_t xfer_len; /*!< Current transfer length. */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
+
+ uint8_t toggle_in; /*!< IN transfer current toggle flag.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t toggle_out; /*!< OUT transfer current toggle flag
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
+
+ uint32_t ErrCnt; /*!< Host channel error count.*/
+
+ USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
+ This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+ USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
+ This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
+
+}USB_OTG_HCTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup USB_Core_Mode_
+ * @{
+ */
+#define USB_OTG_MODE_DEVICE 0
+#define USB_OTG_MODE_HOST 1
+#define USB_OTG_MODE_DRD 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Speed_
+ * @{
+ */
+#define USB_OTG_SPEED_HIGH 0
+#define USB_OTG_SPEED_HIGH_IN_FULL 1
+#define USB_OTG_SPEED_LOW 2
+#define USB_OTG_SPEED_FULL 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_PHY_
+ * @{
+ */
+#define USB_OTG_ULPI_PHY 1
+#define USB_OTG_EMBEDDED_PHY 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_MPS_
+ * @{
+ */
+#define USB_OTG_HS_MAX_PACKET_SIZE 512
+#define USB_OTG_FS_MAX_PACKET_SIZE 64
+#define USB_OTG_MAX_EP0_SIZE 64
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Phy_Frequency_
+ * @{
+ */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1)
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Frame_Interval_
+ * @{
+ */
+#define DCFG_FRAME_INTERVAL_80 0
+#define DCFG_FRAME_INTERVAL_85 1
+#define DCFG_FRAME_INTERVAL_90 2
+#define DCFG_FRAME_INTERVAL_95 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP0_MPS_
+ * @{
+ */
+#define DEP0CTL_MPS_64 0
+#define DEP0CTL_MPS_32 1
+#define DEP0CTL_MPS_16 2
+#define DEP0CTL_MPS_8 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Speed_
+ * @{
+ */
+#define EP_SPEED_LOW 0
+#define EP_SPEED_FULL 1
+#define EP_SPEED_HIGH 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Type_
+ * @{
+ */
+#define EP_TYPE_CTRL 0
+#define EP_TYPE_ISOC 1
+#define EP_TYPE_BULK 2
+#define EP_TYPE_INTR 3
+#define EP_TYPE_MSK 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_STS_Defines_
+ * @{
+ */
+#define STS_GOUT_NAK 1
+#define STS_DATA_UPDT 2
+#define STS_XFER_COMP 3
+#define STS_SETUP_COMP 4
+#define STS_SETUP_UPDT 6
+/**
+ * @}
+ */
+
+/** @defgroup HCFG_SPEED_Defines_
+ * @{
+ */
+#define HCFG_30_60_MHZ 0
+#define HCFG_48_MHZ 1
+#define HCFG_6_MHZ 2
+/**
+ * @}
+ */
+
+/** @defgroup HPRT0_PRTSPD_SPEED_Defines_
+ * @{
+ */
+#define HPRT0_PRTSPD_HIGH_SPEED 0
+#define HPRT0_PRTSPD_FULL_SPEED 1
+#define HPRT0_PRTSPD_LOW_SPEED 2
+/**
+ * @}
+ */
+
+#define HCCHAR_CTRL 0
+#define HCCHAR_ISOC 1
+#define HCCHAR_BULK 2
+#define HCCHAR_INTR 3
+
+#define HC_PID_DATA0 0
+#define HC_PID_DATA2 1
+#define HC_PID_DATA1 2
+#define HC_PID_SETUP 3
+
+#define GRXSTS_PKTSTS_IN 2
+#define GRXSTS_PKTSTS_IN_XFER_COMP 3
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
+#define GRXSTS_PKTSTS_CH_HALTED 7
+
+#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
+
+#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
+#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
+
+/* Exported macro ------------------------------------------------------------*/
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/system_stm32f4xx.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,124 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 19-June-2014
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F4xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/TARGET_NUCLEO_L053R8/TARGET_STM/TARGET_NUCLEO_L053R8/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_NUCLEO_L053R8/TARGET_STM/TARGET_NUCLEO_L053R8/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -30,6 +30,7 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
@@ -48,6 +49,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value) {
*obj->reg_set = obj->mask;
} else {
@@ -56,6 +58,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/system_stm32l0xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/system_stm32l0xx.o has changed
--- a/TARGET_NUCLEO_L152RE/TARGET_STM/TARGET_NUCLEO_L152RE/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_NUCLEO_L152RE/TARGET_STM/TARGET_NUCLEO_L152RE/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -30,6 +30,7 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
@@ -48,6 +49,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value) {
*obj->reg_set = obj->mask;
} else {
@@ -56,6 +58,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/misc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_aes.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_aes_util.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_dbgmcu.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_exti.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_sdio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_syscfg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/system_stm32l1xx.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/misc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_aes.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_aes_util.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_dbgmcu.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_exti.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_sdio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_syscfg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/system_stm32l1xx.o has changed
--- a/TARGET_UBLOX_C027/TARGET_NXP/TARGET_LPC176X/gpio_object.h Wed Jun 11 15:14:05 2014 +0100
+++ b/TARGET_UBLOX_C027/TARGET_NXP/TARGET_LPC176X/gpio_object.h Wed Jul 02 13:22:23 2014 +0100
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -31,6 +33,7 @@
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
if (value)
*obj->reg_set = obj->mask;
else
@@ -38,6 +41,7 @@
}
static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CS/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CS/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/system_LPC17xx.o has changed
--- a/error.h Wed Jun 11 15:14:05 2014 +0100
+++ b/error.h Wed Jul 02 13:22:23 2014 +0100
@@ -53,8 +53,6 @@
* #endcode
*/
-#include "toolchain.h"
-
#ifdef __cplusplus
extern "C" {
#endif
--- a/mbed.h Wed Jun 11 15:14:05 2014 +0100 +++ b/mbed.h Wed Jul 02 13:22:23 2014 +0100 @@ -16,7 +16,7 @@ #ifndef MBED_H #define MBED_H -#define MBED_LIBRARY_VERSION 84 +#define MBED_LIBRARY_VERSION 86 #include "platform.h"
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_assert.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,50 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ASSERT_H
+#define MBED_ASSERT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Internal mbed assert function which is invoked when MBED_ASSERT macro failes.
+ * This function is active only if NDEBUG is not defined prior to including this
+ * assert header file.
+ * In case of MBED_ASSERT failing condition, the assertation message is printed
+ * to stderr and mbed_die() is called.
+ * @param expr Expresion to be checked.
+ * @param file File where assertation failed.
+ * @param line Failing assertation line number.
+ */
+void mbed_assert_internal(const char *expr, const char *file, int line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#ifdef NDEBUG
+#define MBED_ASSERT(expr) ((void)0)
+
+#else
+#define MBED_ASSERT(expr) \
+do { \
+ if (!(expr)) { \
+ mbed_assert_internal(#expr, __FILE__, __LINE__); \
+ } \
+} while (0)
+#endif
+
+#endif