gabriel della-monica
mbed library sources
Fork of
mbed-src
by 
mbed official
Revision 442:d916d321e60f, committed 2015-01-08
- Comitter:
- mbed_official
- Date:
- Thu Jan 08 12:00:08 2015 +0000
- Parent:
- 441:d2c15dda23c1
- Child:
- 443:ed48b4122bfb
- Commit message:
- Synchronized with git revision 2acefb66eb35837a685ce640b2b15e068d4ccf5b
Full URL: https://github.com/mbedmicro/mbed/commit/2acefb66eb35837a685ce640b2b15e068d4ccf5b/
NUCLEO_F334R8 - Fix issue with multiple ADC initialization
Changed in this revision
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,80 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/PeripheralPins.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,190 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/PeripheralPins.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,173 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Generic signals namings
- LED1 = PD_12,
- LED2 = PD_13,
- LED3 = PD_14,
- LED4 = PD_15,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/PortNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/analogin_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,169 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
- HAL_ADC_Init(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
- sConfig.Offset = 0;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/device.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/gpio_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRRL;
- obj->reg_clr = &gpio->BSRRH;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/gpio_irq_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,332 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
-#define CHANNEL_NUM (7)
-
-// Max pins for one line (max with EXTI10_15)
-#define MAX_PIN_LINE (6)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0
- 0, // pin 0
- // EXTI1
- 0, // pin 1
- // EXTI2
- 0, // pin 2
- // EXTI3
- 0, // pin 3
- // EXTI4
- 0, // pin 4
- // EXTI5_9
- 0, // pin 5
- 1, // pin 6
- 2, // pin 7
- 3, // pin 8
- 4, // pin 9
- // EXTI10_15
- 0, // pin 10
- 1, // pin 11
- 2, // pin 12
- 3, // pin 13
- 4, // pin 14
- 5 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 1);
-}
-
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 1);
-}
-
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 1);
-}
-
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3, 1);
-}
-
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4, 1);
-}
-
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5, 5);
-}
-
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6, 6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/gpio_object.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,71 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/i2c_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,495 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-int i2c3_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C3 clock and pinout if not done
- if ((obj->i2c == I2C_3) && !i2c3_inited) {
- i2c3_inited = 1;
- __I2C3_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-
- // I2C master by default
- obj->slave = 0;
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz != 0) && (hz <= 400000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.ClockSpeed = hz;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- HAL_I2C_Init(&I2cHandle);
- if (obj->slave) {
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR1 |= I2C_CR1_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR1 |= I2C_CR1_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Read all bytes except last one
- for (count = 0; count < (length - 1); count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // If not repeated start, send stop.
- // Warning: must be done BEFORE the data is read.
- if (stop) {
- i2c_stop(obj);
- }
-
- // Read the last byte
- value = i2c_byte_read(obj, 1);
- data[count] = (char)value;
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return -1;
- }
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- if (last) {
- // Don't acknowledge the last byte
- i2c->CR1 &= ~I2C_CR1_ACK;
- } else {
- // Acknowledge the byte
- i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->DR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- i2c->DR = (uint8_t)data;
-
- // Wait until the byte is transmitted
- timeout = FLAG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
- (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
- if (obj->i2c == I2C_3) {
- __I2C3_FORCE_RESET();
- __I2C3_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- if (enable_slave) {
- obj->slave = 1;
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until RXNE flag is set */
- // Wait until the byte is received
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
- }
- }
-
- /* Wait until STOP flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Clear STOP flag */
- __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until TXE flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
- }
- }
-
- /* Wait until AF flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- I2cHandle.State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(&I2cHandle);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/mbed_overrides.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/objects.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,105 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/pinmap.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,141 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortH:
- gpio_add = GPIOH_BASE;
- __GPIOH_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/port_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/pwmout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,235 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __TIM4_CLK_ENABLE();
- if (obj->pwm == PWM_9) __TIM9_CLK_ENABLE();
- if (obj->pwm == PWM_10) __TIM10_CLK_ENABLE();
- if (obj->pwm == PWM_11) __TIM11_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
-
- // Channels 1
- case PA_0:
- case PA_5:
- case PA_6:
- case PA_8:
- case PA_15:
- case PB_4:
- case PB_6:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
-
- // Channels 1N
- case PA_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
-
- // Channels 2
- case PA_1:
- case PA_9:
- case PB_3:
- case PB_5:
- case PB_7:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
-
- // Channels 2N
- case PB_0:
- case PB_14:
- channel = TIM_CHANNEL_2;
- complementary_channel = 1;
- break;
-
- // Channels 3
- case PA_2:
- case PA_10:
- case PB_8:
- case PB_10:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
-
- // Channels 3N
- case PB_1:
- case PB_15:
- channel = TIM_CHANNEL_3;
- complementary_channel = 1;
- break;
-
- // Channels 4
- case PA_3:
- case PA_11:
- case PB_9:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
-
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/rtc_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,203 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/serial_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,337 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (3)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
- if (obj->uart == UART_6) {
- __USART6_CLK_ENABLE();
- obj->index = 2;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
- if (obj->uart == UART_6) {
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart6_irq(void)
-{
- uart_irq(UART_6, 2);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_6) {
- irq_n = USART6_IRQn;
- vector = (uint32_t)&uart6_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->DR & 0x1FF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->DR = (uint32_t)(c & 0x1FF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/sleep.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM5;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/spi_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,280 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_3) {
- __SPI3_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_3) {
- __SPI3_FORCE_RESET();
- __SPI3_RELEASE_RESET();
- __SPI3_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Note: The frequencies are obtained with SPI1 clock = 84 MHz (APB2 clock)
- if (hz < 600000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 330 kHz
- } else if ((hz >= 600000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 656 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.3 MHz
- } else if ((hz >= 2000000) && (hz < 5000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2.6 MHz
- } else if ((hz >= 5000000) && (hz < 10000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 5.25 MHz
- } else if ((hz >= 10000000) && (hz < 21000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 10.5 MHz
- } else if ((hz >= 21000000) && (hz < 42000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 21 MHz
- } else { // >= 42000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 42 MHz
- }
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F401VC/us_ticker.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,96 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
- UART_7 = (int)UART7_BASE,
- UART_8 = (int)UART8_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_9
-#define STDIO_UART_RX PA_10
-#define STDIO_UART UART_1
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE,
- SPI_6 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/PeripheralPins.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,285 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {PF_3, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN9
- {PF_4, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN14
- {PF_5, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN15
- {PF_6, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN4
- {PF_7, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN5
- {PF_8, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN6
- {PF_9, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN7
- {PF_10,ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN8
- {NC, NC, 0}
-};
-
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_0, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_5, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_4, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_7, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_5, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM8)}, // TIM8_CH1N
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1N
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
- {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3N
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
- {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_14, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_15, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
-// {PC_6, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
-// {PC_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
-// {PC_8, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-// {PC_9, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH4
-
- {PD_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
- {PD_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PD_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
- {PD_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-
- {PE_5, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PE_6, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
-
- {PE_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PE_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PE_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
- {PE_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PE_12, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
- {PE_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PE_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
-
- {PH_13, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1N
- {PH_14, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
- {PH_15, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3N
-
- {PI_2, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH4
- {PI_5, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1
- {PI_6, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2
- {PI_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PE_1, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
- {PE_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PE_0, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
- {PE_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {PG_9, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
-// {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)}, // error in datasheet?
- {PE_6, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PF_11, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PG_14, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
- {PI_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PE_5, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PG_12, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
- {PH_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PH_5, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PI_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PE_2, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PG_13, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
- {PH_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PI_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
- {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PE_4, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PG_8, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
- {PH_5, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PI_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/PeripheralPins.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,314 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
-
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
-
-
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
-
- PJ_0 = 0x90,
- PJ_1 = 0x91,
- PJ_2 = 0x92,
- PJ_3 = 0x93,
- PJ_4 = 0x94,
- PJ_5 = 0x95,
- PJ_6 = 0x96,
- PJ_7 = 0x97,
- PJ_8 = 0x98,
- PJ_9 = 0x99,
- PJ_10 = 0x9A,
- PJ_11 = 0x9B,
- PJ_12 = 0x9C,
- PJ_13 = 0x9D,
- PJ_14 = 0x9E,
- PJ_15 = 0x9F,
-
-
- PK_0 = 0xA0,
- PK_1 = 0xA1,
- PK_2 = 0xA2,
- PK_3 = 0xA3,
- PK_4 = 0xA4,
- PK_5 = 0xA5,
- PK_6 = 0xA6,
- PK_7 = 0xA7,
-
- // Arduino connector namings
-/*
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-*/
-
- // Generic signals namings
- LED1 = PG_13,
- LED2 = PG_14,
- LED3 = PG_13,
- LED4 = PG_14,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_9,
- SERIAL_RX = PA_10,
- USBTX = PA_9,
- USBRX = PA_10,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PA_4,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/PortNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,54 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8,
- PortJ = 9,
- PortK = 10
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/analogin_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,169 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
- HAL_ADC_Init(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
- sConfig.Offset = 0;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/analogout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,156 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "stm32f4xx_hal.h"
-#include "PeripheralPins.h"
-
-#define RANGE_12BIT (0xFFF)
-
-DAC_HandleTypeDef DacHandle;
-static DAC_ChannelConfTypeDef sConfig;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- uint32_t channel ;
- HAL_StatusTypeDef status;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
-
- if (obj->dac == (DACName)NC) {
- error("DAC pin mapping failed");
- }
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the channel for the write and read functions
- obj->channel = pin;
-
- __GPIOA_CLK_ENABLE();
-
- __DAC_CLK_ENABLE();
-
- DacHandle.Instance = DAC;
-
- status = HAL_DAC_Init(&DacHandle);
- if ( status != HAL_OK ) {
- error("HAL_DAC_Init failed");
- }
-
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
-
- if (obj->channel == PA_4) {
- channel = DAC_CHANNEL_1;
- } else {
- channel = DAC_CHANNEL_2;
- }
-
- if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
- error("HAL_DAC_ConfigChannel failed");
- }
-
- if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
- error("HAL_DAC_Start failed");
- }
-
- if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
- error("HAL_DAC_SetValue failed");
- }
-
-}
-
-void analogout_free(dac_t *obj)
-{
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- if (obj->channel == PA_4) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- } else if (obj->channel == PA_5) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- }
-
- if ( status != HAL_OK ) {
- error("ADC pin mapping failed");
- }
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->channel == PA_4) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- } else if (obj->channel == PA_5) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
- return 0; /* Just silented warning */
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)RANGE_12BIT); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)RANGE_12BIT));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)RANGE_12BIT) {
- value = (uint16_t)RANGE_12BIT; // Max value
- }
-
- dac_write(obj, value);
-}
-
-float analogout_read(dac_t *obj)
-{
-
- uint32_t value = dac_read(obj);
- return (float)value * (1.0f / (float)RANGE_12BIT);
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/device.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/gpio_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRRL;
- obj->reg_clr = &gpio->BSRRH;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/gpio_irq_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,272 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-#define CHANNEL_NUM (7)
-
-static uint32_t channel_ids[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-static uint32_t channel_gpio[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-static uint32_t channel_pin[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index)
-{
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(channel_gpio[irq_index]);
- uint32_t pin = (uint32_t)(1 << channel_pin[irq_index]);
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
- }
-
- if (channel_ids[irq_index] == 0) return;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(channel_ids[irq_index], IRQ_FALL);
- } else {
- irq_handler(channel_ids[irq_index], IRQ_RISE);
- }
-}
-
-// The irq_index is passed to the function
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0);
-}
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1);
-}
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2);
-}
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3);
-}
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4);
-}
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5);
-}
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
- channel_ids[irq_index] = id;
- channel_gpio[irq_index] = gpio_add;
- channel_pin[irq_index] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- channel_ids[obj->irq_index] = 0;
- channel_gpio[obj->irq_index] = 0;
- channel_pin[obj->irq_index] = 0;
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_INPUT;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
-
- pull = GPIO_NOPULL;
-
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
-
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else {
- mode = STM_MODE_INPUT;
- pull = GPIO_NOPULL;
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else if (obj->event == EDGE_RISE) {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- else if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else if (obj->event == IRQ_FALL) {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- else {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/gpio_object.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,71 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/i2c_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,481 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-int i2c3_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1)&& !i2c1_inited) {
- i2c1_inited = 1;
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2)&& !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C3 clock and pinout if not done
- if ((obj->i2c == I2C_3)&& !i2c3_inited) {
- i2c3_inited = 1;
- __I2C3_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-
- // I2C master by default
- obj->slave = 0;
-}
-
-void i2c_frequency(i2c_t *obj, int hz) {
- MBED_ASSERT((hz != 0) && (hz <= 400000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.ClockSpeed = hz;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- HAL_I2C_Init(&I2cHandle);
- if (obj->slave) {
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-
-}
-
-inline int i2c_start(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR1 |= I2C_CR1_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR1 |= I2C_CR1_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Read all bytes except last one
- for (count = 0; count < (length - 1); count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // If not repeated start, send stop.
- // Warning: must be done BEFORE the data is read.
- if (stop) {
- i2c_stop(obj);
- }
-
- // Read the last byte
- value = i2c_byte_read(obj, 1);
- data[count] = (char)value;
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return -1;
- }
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- if (last) {
- // Don't acknowledge the last byte
- i2c->CR1 &= ~I2C_CR1_ACK;
- } else {
- // Acknowledge the byte
- i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->DR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- i2c->DR = (uint8_t)data;
-
- // Wait until the byte is transmitted
- timeout = FLAG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
- (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj) {
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
- if (obj->i2c == I2C_3) {
- __I2C3_FORCE_RESET();
- __I2C3_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave) {
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- if (enable_slave) {
- obj->slave = 1;
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj) {
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length) {
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until RXNE flag is set */
- // Wait until the byte is received
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
- }
- }
-
- /* Wait until STOP flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Clear STOP flag */
- __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length) {
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until TXE flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
- }
- }
-
- /* Wait until AF flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- I2cHandle.State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(&I2cHandle);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/mbed_overrides.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/objects.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,110 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/pinmap.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,153 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortE:
- gpio_add = GPIOE_BASE;
- __GPIOE_CLK_ENABLE();
- break;
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
- case PortG:
- gpio_add = GPIOG_BASE;
- __GPIOG_CLK_ENABLE();
- break;
- case PortH:
- gpio_add = GPIOH_BASE;
- __GPIOH_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/port_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/pwmout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,235 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __TIM4_CLK_ENABLE();
- if (obj->pwm == PWM_9) __TIM9_CLK_ENABLE();
- if (obj->pwm == PWM_10) __TIM10_CLK_ENABLE();
- if (obj->pwm == PWM_11) __TIM11_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
-
- // Channels 1
- case PA_0:
- case PA_5:
- case PA_6:
- case PA_8:
- case PA_15:
- case PB_4:
- case PB_6:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
-
- // Channels 1N
- case PA_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
-
- // Channels 2
- case PA_1:
- case PA_9:
- case PB_3:
- case PB_5:
- case PB_7:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
-
- // Channels 2N
- case PB_0:
- case PB_14:
- channel = TIM_CHANNEL_2;
- complementary_channel = 1;
- break;
-
- // Channels 3
- case PA_2:
- case PA_10:
- case PB_8:
- case PB_10:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
-
- // Channels 3N
- case PB_1:
- case PB_15:
- channel = TIM_CHANNEL_3;
- complementary_channel = 1;
- break;
-
- // Channels 4
- case PA_3:
- case PA_11:
- case PB_9:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
-
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/rtc_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,203 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/serial_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,333 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (3)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
- if (obj->uart == UART_6) {
- __USART6_CLK_ENABLE();
- obj->index = 2;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- pin_mode(tx, PullUp);
- pin_mode(rx, PullUp);
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
- if (obj->uart == UART_6) {
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart6_irq(void)
-{
- uart_irq(UART_6, 2);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_6) {
- irq_n = USART6_IRQn;
- vector = (uint32_t)&uart6_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->DR & 0x1FF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->DR = (uint32_t)(c & 0x1FF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/sleep.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM5;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/spi_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,316 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
- if (obj->spi == SPI_3) {
- __SPI3_CLK_ENABLE();
- }
- if (obj->spi == SPI_4) {
- __SPI4_CLK_ENABLE();
- }
- if (obj->spi == SPI_5) {
- __SPI5_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
- if (obj->spi == SPI_3) {
- __SPI3_FORCE_RESET();
- __SPI3_RELEASE_RESET();
- __SPI3_CLK_DISABLE();
- }
- if (obj->spi == SPI_4) {
- __SPI4_FORCE_RESET();
- __SPI4_RELEASE_RESET();
- __SPI4_CLK_DISABLE();
- }
- if (obj->spi == SPI_5) {
- __SPI5_FORCE_RESET();
- __SPI5_RELEASE_RESET();
- __SPI5_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Values depend of PCLK2: 100 MHz
- if ((obj->spi == SPI_1) || (obj->spi == SPI_4) || (obj->spi == SPI_5)) {
- if (hz < 700000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 391 kHz
- } else if ((hz >= 700000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 781 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.56 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 3.13 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 6.25 MHz
- } else if ((hz >= 12000000) && (hz < 25000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 12.5 MHz
- } else if ((hz >= 25000000) && (hz < 50000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 25 MHz
- } else { // >= 50000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 50 MHz
- }
- }
-
- // Values depend of PCLK1: 50 MHz
- if ((obj->spi == SPI_2) || (obj->spi == SPI_3)) {
- if (hz < 400000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 195 kHz
- } else if ((hz >= 400000) && (hz < 700000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 391 kHz
- } else if ((hz >= 700000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 781 MHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.56 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3.13 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6.25 MHz
- } else if ((hz >= 12000000) && (hz < 25000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12.5 MHz
- } else { // >= 25000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 25 MHz
- }
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F429ZI/us_ticker.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,91 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,157 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Generic signals namings
- LED1 = PA_9,
- LED2 = PA_9,
- LED3 = PA_9,
- LED4 = PA_9,
- SERIAL_TX = PA_9,
- SERIAL_RX = PA_10,
- I2C_SCL = PA_8,
- I2C_SDA = PC_9,
- SPI_MOSI = PC_12,
- SPI_MISO = PC_11,
- SPI_SCK = PC_10,
- SPI_CS = PC_13,
- PWM0 = PA_8,
- PWM1 = PC_9,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/PortNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/analogin_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,184 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-
-static const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin) {
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
- HAL_ADC_Init(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj) {
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
- sConfig.Offset = 0;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj) {
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj) {
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/analogout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,161 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "stm32f4xx_hal.h"
-
-#define RANGE_12BIT (0xFFF)
-
-DAC_HandleTypeDef DacHandle;
-static DAC_ChannelConfTypeDef sConfig;
-
-static const PinMap PinMap_DAC[] = {
- {PA_4, DAC_0, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- uint32_t channel ;
- HAL_StatusTypeDef status;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
-
- if (obj->dac == (DACName)NC) {
- error("DAC pin mapping failed");
- }
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the channel for the write and read functions
- obj->channel = pin;
-
- __GPIOA_CLK_ENABLE();
-
- __DAC_CLK_ENABLE();
-
- DacHandle.Instance = DAC;
-
- status = HAL_DAC_Init(&DacHandle);
- if ( status != HAL_OK ) {
- error("HAL_DAC_Init failed");
- }
-
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
-
- if (obj->channel == PA_4) {
- channel = DAC_CHANNEL_1;
- } else {
- channel = DAC_CHANNEL_2;
- }
-
- if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
- error("HAL_DAC_ConfigChannel failed");
- }
-
- if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
- error("HAL_DAC_Start failed");
- }
-
- if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
- error("HAL_DAC_SetValue failed");
- }
-
-}
-
-void analogout_free(dac_t *obj)
-{
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- if (obj->channel == PA_4) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- } else if (obj->channel == PA_5) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- }
-
- if ( status != HAL_OK ) {
- error("ADC pin mapping failed");
- }
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->channel == PA_4) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- } else if (obj->channel == PA_5) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
- return 0; /* Just silented warning */
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)RANGE_12BIT); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)RANGE_12BIT));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)RANGE_12BIT) {
- value = (uint16_t)RANGE_12BIT; // Max value
- }
-
- dac_write(obj, value);
-}
-
-float analogout_read(dac_t *obj)
-{
-
- uint32_t value = dac_read(obj);
- return (float)value * (1.0f / (float)RANGE_12BIT);
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/device.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/gpio_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,73 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin) {
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin) {
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRRL;
- obj->reg_clr = &gpio->BSRRH;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode) {
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/gpio_irq_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,260 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-#define CHANNEL_NUM (16)
-
-static uint32_t channel_ids[CHANNEL_NUM] = {0};
-static uint32_t channel_gpio[CHANNEL_NUM] = {0};
-
-static gpio_irq_handler irq_handler[CHANNEL_NUM] = {NULL};
-
-static void handle_interrupt_in(uint32_t pin_index) {
- uint32_t pin = (uint32_t)(1 << pin_index);
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(channel_gpio[pin_index]);
-
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (channel_ids[pin_index] == 0) return;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler[pin_index](channel_ids[pin_index], IRQ_FALL);
- } else {
- irq_handler[pin_index](channel_ids[pin_index], IRQ_RISE);
- }
- }
-}
-
-// The irq_index is passed to the function
-// EXTI line 0
-static void gpio_irq0(void) {
- handle_interrupt_in(0);
-}
-// EXTI line 1
-static void gpio_irq1(void) {
- handle_interrupt_in(1);
-}
-// EXTI line 2
-static void gpio_irq2(void) {
- handle_interrupt_in(2);
-}
-// EXTI line 3
-static void gpio_irq3(void) {
- handle_interrupt_in(3);
-}
-// EXTI line 4
-static void gpio_irq4(void) {
- handle_interrupt_in(4);
-}
-// EXTI lines 5 to 9
-static void gpio_irq5(void) {
- uint8_t i;
-
- for (i = 5; i <= 9; i++)
- {
- handle_interrupt_in(i);
- }
-}
-// EXTI lines 10 to 15
-static void gpio_irq6(void) {
- uint8_t i;
-
- for (i = 10; i <= 15; i++)
- {
- handle_interrupt_in(i);
- }
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) {
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->event = EDGE_NONE;
- obj->pin = pin;
- channel_ids[pin_index] = id;
- channel_gpio[pin_index] = gpio_add;
-
- irq_handler[pin_index] = handler;
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj) {
- uint32_t pin_index = STM_PIN(obj->pin);
-
- channel_ids[pin_index] = 0;
- channel_gpio[pin_index] = 0;
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) {
- uint32_t mode = STM_MODE_INPUT;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
-
- pull = GPIO_NOPULL;
-
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
-
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else {
- mode = STM_MODE_INPUT;
- pull = GPIO_NOPULL;
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else if (obj->event == EDGE_RISE) {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- else if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else if (obj->event == IRQ_FALL) {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- else {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
-
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj) {
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj) {
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/gpio_object.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/i2c_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,496 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-static const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-int i2c3_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1)&& !i2c1_inited) {
- i2c1_inited = 1;
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2)&& !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C3 clock and pinout if not done
- if ((obj->i2c == I2C_3)&& !i2c3_inited) {
- i2c3_inited = 1;
- __I2C3_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-
- // I2C master by default
- obj->slave = 0;
-}
-
-void i2c_frequency(i2c_t *obj, int hz) {
- MBED_ASSERT((hz != 0) && (hz <= 400000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.ClockSpeed = hz;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- HAL_I2C_Init(&I2cHandle);
- if (obj->slave) {
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-
-}
-
-inline int i2c_start(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR1 |= I2C_CR1_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR1 |= I2C_CR1_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Read all bytes except last one
- for (count = 0; count < (length - 1); count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // If not repeated start, send stop.
- // Warning: must be done BEFORE the data is read.
- if (stop) {
- i2c_stop(obj);
- }
-
- // Read the last byte
- value = i2c_byte_read(obj, 1);
- data[count] = (char)value;
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return -1;
- }
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- if (last) {
- // Don't acknowledge the last byte
- i2c->CR1 &= ~I2C_CR1_ACK;
- } else {
- // Acknowledge the byte
- i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->DR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- i2c->DR = (uint8_t)data;
-
- // Wait until the byte is transmitted
- timeout = FLAG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
- (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj) {
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
- if (obj->i2c == I2C_3) {
- __I2C3_FORCE_RESET();
- __I2C3_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave) {
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- if (enable_slave) {
- obj->slave = 1;
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj) {
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length) {
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until RXNE flag is set */
- // Wait until the byte is received
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
- }
- }
-
- /* Wait until STOP flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Clear STOP flag */
- __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length) {
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until TXE flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
- }
- }
-
- /* Wait until AF flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- I2cHandle.State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(&I2cHandle);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/mbed_overrides.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,36 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init() {
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/objects.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,109 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/pinmap.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,138 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx) {
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortH:
- gpio_add = GPIOH_BASE;
- __GPIOH_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data) {
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode) {
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/port_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,97 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n) {
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir) {
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir) {
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode) {
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value) {
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj) {
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/pwmout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,284 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-// TIM5 cannot be used because already used by the us_ticker
-static const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_5, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM8)}, // TIM8_CH1N
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1N
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
- {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3N
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
- {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_14, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_15, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
-// {PC_6, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
-// {PC_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
-// {PC_8, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-// {PC_9, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH4
-
- {NC, NC, 0}
-};
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin) {
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __TIM4_CLK_ENABLE();
- if (obj->pwm == PWM_9) __TIM9_CLK_ENABLE();
- if (obj->pwm == PWM_10) __TIM10_CLK_ENABLE();
- if (obj->pwm == PWM_11) __TIM11_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj) {
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value) {
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
-
- // Channels 1
- case PA_0:
- case PA_5:
- case PA_6:
- case PA_8:
- case PA_15:
- case PB_4:
- case PB_6:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
-
- // Channels 1N
- case PA_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
-
- // Channels 2
- case PA_1:
- case PA_9:
- case PB_3:
- case PB_5:
- case PB_7:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
-
- // Channels 2N
- case PB_0:
- case PB_14:
- channel = TIM_CHANNEL_2;
- complementary_channel = 1;
- break;
-
- // Channels 3
- case PA_2:
- case PA_10:
- case PB_8:
- case PB_10:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
-
- // Channels 3N
- case PB_1:
- case PB_15:
- channel = TIM_CHANNEL_3;
- complementary_channel = 1;
- break;
-
- // Channels 4
- case PA_3:
- case PA_11:
- case PB_9:
- case PB_11:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
-
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj) {
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds) {
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms) {
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us) {
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds) {
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) {
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us) {
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/rtc_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,198 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void) {
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
- rtc_freq = 32000;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void) {
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void) {
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void) {
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t) {
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/serial_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,397 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-
-static const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-#define UART_NUM (6)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj) {
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx) {
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- switch (obj->uart) {
- case UART_1:
- __USART1_CLK_ENABLE();
- obj->index = 0;
- break;
- case UART_2:
- __USART2_CLK_ENABLE();
- obj->index = 1;
- break;
- case UART_3:
- __USART3_CLK_ENABLE();
- obj->index = 2;
- break;
- case UART_4:
- __UART4_CLK_ENABLE();
- obj->index = 3;
- break;
- case UART_5:
- __UART5_CLK_ENABLE();
- obj->index = 4;
- break;
- case UART_6:
- __USART6_CLK_ENABLE();
- obj->index = 5;
- break;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-
-}
-
-void serial_free(serial_t *obj) {
- // Reset UART and disable clock
- switch (obj->uart) {
- case UART_1:
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- break;
- case UART_2:
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- break;
- case UART_3:
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- break;
- case UART_4:
- __UART4_FORCE_RESET();
- __UART4_RELEASE_RESET();
- __UART4_CLK_DISABLE();
- break;
- case UART_5:
- __UART5_FORCE_RESET();
- __UART5_RELEASE_RESET();
- __UART5_CLK_DISABLE();
- break;
- case UART_6:
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- break;
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate) {
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) {
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id) {
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void) {
- uart_irq(UART_1, 0);
-}
-static void uart2_irq(void) {
- uart_irq(UART_2, 1);
-}
-static void uart3_irq(void) {
- uart_irq(UART_3, 2);
-}
-static void uart4_irq(void) {
- uart_irq(UART_4, 3);
-}
-static void uart5_irq(void) {
- uart_irq(UART_5, 4);
-}
-static void uart6_irq(void) {
- uart_irq(UART_6, 5);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) {
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) {
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- switch (obj->uart) {
- case UART_1:
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- break;
-
- case UART_2:
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- break;
-
- case UART_3:
- irq_n = USART3_IRQn;
- vector = (uint32_t)&uart3_irq;
- break;
-
- case UART_4:
- irq_n = UART4_IRQn;
- vector = (uint32_t)&uart4_irq;
- break;
-
- case UART_5:
- irq_n = UART5_IRQn;
- vector = (uint32_t)&uart5_irq;
- break;
-
- case UART_6:
- irq_n = USART6_IRQn;
- vector = (uint32_t)&uart6_irq;
- break;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj) {
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->DR & 0x1FF);
-}
-
-void serial_putc(serial_t *obj, int c) {
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->DR = (uint32_t)(c & 0x1FF);
-}
-
-int serial_readable(serial_t *obj) {
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj) {
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj) {
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx) {
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj) {
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj) {
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/sleep.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,59 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void) {
- TimMasterHandle.Instance = TIM5;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void) {
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/spi_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,324 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-
-static const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj) {
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
- if (obj->spi == SPI_3) {
- __SPI3_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj) {
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_3) {
- __SPI3_FORCE_RESET();
- __SPI3_RELEASE_RESET();
- __SPI3_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave) {
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz) {
- // Note: The frequencies are obtained with SPI1 clock = 48 MHz (APB2 clock)
- if (obj->spi == SPI_1) {
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 187.5 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1500000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 0.75 MHz
- } else if ((hz >= 1500000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
- // Note: The frequencies are obtained with SPI2/3 clock = 48 MHz (APB1 clock)
- } else if ((obj->spi == SPI_2) || (obj->spi == SPI_3)) {
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 187.5 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1500000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 0.75 MHz
- } else if ((hz >= 1500000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-static inline int ssp_read(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-static inline int ssp_busy(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value) {
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj) {
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-void spi_slave_write(spi_t *obj, int value) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-int spi_busy(spi_t *obj) {
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_MTS_MDOT_F405RG/us_ticker.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,64 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void) {
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read() {
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp) {
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void) {
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void) {
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/analogin_api.c Tue Jan 06 16:15:36 2015 +0000
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/analogin_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -37,10 +37,11 @@
ADC_HandleTypeDef AdcHandle;
-int adc_inited = 0;
-
void analogin_init(analogin_t *obj, PinName pin)
{
+ static int adc1_inited = 0;
+ static int adc2_inited = 0;
+
// Get the peripheral name from the pin and assign it to the object
obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
MBED_ASSERT(obj->adc != (ADCName)NC);
@@ -51,30 +52,30 @@
// Save pin number for the read function
obj->pin = pin;
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
+ // Check if ADC is already initialized
+ if ((obj->adc == ADC_1) && adc1_inited) return;
+ if ((obj->adc == ADC_2) && adc2_inited) return;
+ if (obj->adc == ADC_1) adc1_inited = 1;
+ if (obj->adc == ADC_2) adc2_inited = 1;
- // Enable ADC clock
- if (obj->adc == ADC_1) __ADC1_CLK_ENABLE();
- if (obj->adc == ADC_2) __ADC2_CLK_ENABLE();
+ // Enable ADC clock
+ __ADC12_CLK_ENABLE();
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
- HAL_ADC_Init(&AdcHandle);
- }
+ // Configure ADC
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+ AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
+ AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
+ AdcHandle.Init.ScanConvMode = DISABLE;
+ AdcHandle.Init.ContinuousConvMode = DISABLE;
+ AdcHandle.Init.DiscontinuousConvMode = DISABLE;
+ AdcHandle.Init.NbrOfDiscConversion = 0;
+ AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
+ AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ AdcHandle.Init.NbrOfConversion = 1;
+ AdcHandle.Init.DMAContinuousRequests = DISABLE;
+ AdcHandle.Init.EOCSelection = DISABLE;
+ HAL_ADC_Init(&AdcHandle);
}
static inline uint16_t adc_read(analogin_t *obj)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,80 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/PeripheralPins.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,190 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/PeripheralPins.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,182 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/PortNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/analogin_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,169 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
- HAL_ADC_Init(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
- sConfig.Offset = 0;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/device.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRRL;
- obj->reg_clr = &gpio->BSRRH;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_irq_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,332 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
-#define CHANNEL_NUM (7)
-
-// Max pins for one line (max with EXTI10_15)
-#define MAX_PIN_LINE (6)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0
- 0, // pin 0
- // EXTI1
- 0, // pin 1
- // EXTI2
- 0, // pin 2
- // EXTI3
- 0, // pin 3
- // EXTI4
- 0, // pin 4
- // EXTI5_9
- 0, // pin 5
- 1, // pin 6
- 2, // pin 7
- 3, // pin 8
- 4, // pin 9
- // EXTI10_15
- 0, // pin 10
- 1, // pin 11
- 2, // pin 12
- 3, // pin 13
- 4, // pin 14
- 5 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 1);
-}
-
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 1);
-}
-
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 1);
-}
-
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3, 1);
-}
-
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4, 1);
-}
-
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5, 5);
-}
-
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6, 6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_object.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,71 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/i2c_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,495 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-int i2c3_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C3 clock and pinout if not done
- if ((obj->i2c == I2C_3) && !i2c3_inited) {
- i2c3_inited = 1;
- __I2C3_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-
- // I2C master by default
- obj->slave = 0;
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz != 0) && (hz <= 400000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.ClockSpeed = hz;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- HAL_I2C_Init(&I2cHandle);
- if (obj->slave) {
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR1 |= I2C_CR1_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR1 |= I2C_CR1_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Read all bytes except last one
- for (count = 0; count < (length - 1); count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // If not repeated start, send stop.
- // Warning: must be done BEFORE the data is read.
- if (stop) {
- i2c_stop(obj);
- }
-
- // Read the last byte
- value = i2c_byte_read(obj, 1);
- data[count] = (char)value;
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return -1;
- }
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- if (last) {
- // Don't acknowledge the last byte
- i2c->CR1 &= ~I2C_CR1_ACK;
- } else {
- // Acknowledge the byte
- i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->DR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- i2c->DR = (uint8_t)data;
-
- // Wait until the byte is transmitted
- timeout = FLAG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
- (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
- if (obj->i2c == I2C_3) {
- __I2C3_FORCE_RESET();
- __I2C3_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- if (enable_slave) {
- obj->slave = 1;
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until RXNE flag is set */
- // Wait until the byte is received
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
- }
- }
-
- /* Wait until STOP flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Clear STOP flag */
- __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until TXE flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
- }
- }
-
- /* Wait until AF flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- I2cHandle.State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(&I2cHandle);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/mbed_overrides.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/objects.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,105 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/pinmap.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,141 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortH:
- gpio_add = GPIOH_BASE;
- __GPIOH_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/port_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/pwmout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,235 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __TIM4_CLK_ENABLE();
- if (obj->pwm == PWM_9) __TIM9_CLK_ENABLE();
- if (obj->pwm == PWM_10) __TIM10_CLK_ENABLE();
- if (obj->pwm == PWM_11) __TIM11_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
-
- // Channels 1
- case PA_0:
- case PA_5:
- case PA_6:
- case PA_8:
- case PA_15:
- case PB_4:
- case PB_6:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
-
- // Channels 1N
- case PA_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
-
- // Channels 2
- case PA_1:
- case PA_9:
- case PB_3:
- case PB_5:
- case PB_7:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
-
- // Channels 2N
- case PB_0:
- case PB_14:
- channel = TIM_CHANNEL_2;
- complementary_channel = 1;
- break;
-
- // Channels 3
- case PA_2:
- case PA_10:
- case PB_8:
- case PB_10:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
-
- // Channels 3N
- case PB_1:
- case PB_15:
- channel = TIM_CHANNEL_3;
- complementary_channel = 1;
- break;
-
- // Channels 4
- case PA_3:
- case PA_11:
- case PB_9:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
-
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/rtc_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,203 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/serial_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,337 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (3)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
- if (obj->uart == UART_6) {
- __USART6_CLK_ENABLE();
- obj->index = 2;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
- if (obj->uart == UART_6) {
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart6_irq(void)
-{
- uart_irq(UART_6, 2);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_6) {
- irq_n = USART6_IRQn;
- vector = (uint32_t)&uart6_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->DR & 0x1FF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->DR = (uint32_t)(c & 0x1FF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/sleep.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM5;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/spi_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,280 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_3) {
- __SPI3_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_3) {
- __SPI3_FORCE_RESET();
- __SPI3_RELEASE_RESET();
- __SPI3_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Note: The frequencies are obtained with SPI1 clock = 84 MHz (APB2 clock)
- if (hz < 600000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 330 kHz
- } else if ((hz >= 600000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 656 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.3 MHz
- } else if ((hz >= 2000000) && (hz < 5000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2.6 MHz
- } else if ((hz >= 5000000) && (hz < 10000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 5.25 MHz
- } else if ((hz >= 10000000) && (hz < 21000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 10.5 MHz
- } else if ((hz >= 21000000) && (hz < 42000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 21 MHz
- } else { // >= 42000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 42 MHz
- }
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/us_ticker.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,88 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0,
+ DAC_1
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)UART4_BASE,
+ UART_5 = (int)UART5_BASE,
+ UART_6 = (int)USART6_BASE,
+} UARTName;
+
+#define STDIO_UART_TX PC_6
+#define STDIO_UART_RX PC_7
+#define STDIO_UART UART_6
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,204 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+ {PA_4, DAC_0, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT1
+ {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT2
+ {NC, NC, 0}
+};
+
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PF_0 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PH_5 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PH_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PF_1 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PH_4 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,283 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_0 = 0x30,
+ PD_1 = 0x31,
+ PD_2 = 0x32,
+ PD_3 = 0x33,
+ PD_4 = 0x34,
+ PD_5 = 0x35,
+ PD_6 = 0x36,
+ PD_7 = 0x37,
+ PD_8 = 0x38,
+ PD_9 = 0x39,
+ PD_10 = 0x3A,
+ PD_11 = 0x3B,
+ PD_12 = 0x3C,
+ PD_13 = 0x3D,
+ PD_14 = 0x3E,
+ PD_15 = 0x3F,
+
+ PE_0 = 0x40,
+ PE_1 = 0x41,
+ PE_2 = 0x42,
+ PE_3 = 0x43,
+ PE_4 = 0x44,
+ PE_5 = 0x45,
+ PE_6 = 0x46,
+ PE_7 = 0x47,
+ PE_8 = 0x48,
+ PE_9 = 0x49,
+ PE_10 = 0x4A,
+ PE_11 = 0x4B,
+ PE_12 = 0x4C,
+ PE_13 = 0x4D,
+ PE_14 = 0x4E,
+ PE_15 = 0x4F,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_2 = 0x52,
+ PF_3 = 0x53,
+ PF_4 = 0x54,
+ PF_5 = 0x55,
+ PF_6 = 0x56,
+ PF_7 = 0x57,
+ PF_8 = 0x58,
+ PF_9 = 0x59,
+ PF_10 = 0x5A,
+ PF_11 = 0x5B,
+ PF_12 = 0x5C,
+ PF_13 = 0x5D,
+ PF_14 = 0x5E,
+ PF_15 = 0x5F,
+
+ PG_0 = 0x60,
+ PG_1 = 0x61,
+ PG_2 = 0x62,
+ PG_3 = 0x63,
+ PG_4 = 0x64,
+ PG_5 = 0x65,
+ PG_6 = 0x66,
+ PG_7 = 0x67,
+ PG_8 = 0x68,
+ PG_9 = 0x69,
+ PG_10 = 0x6A,
+ PG_11 = 0x6B,
+ PG_12 = 0x6C,
+ PG_13 = 0x6D,
+ PG_14 = 0x6E,
+ PG_15 = 0x6F,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+ PH_2 = 0x72,
+ PH_3 = 0x73,
+ PH_4 = 0x74,
+ PH_5 = 0x75,
+ PH_6 = 0x76,
+ PH_7 = 0x77,
+ PH_8 = 0x78,
+ PH_9 = 0x79,
+ PH_10 = 0x7A,
+ PH_11 = 0x7B,
+ PH_12 = 0x7C,
+ PH_13 = 0x7D,
+ PH_14 = 0x7E,
+ PH_15 = 0x7F,
+
+ PI_0 = 0x80,
+ PI_1 = 0x81,
+ PI_2 = 0x82,
+ PI_3 = 0x83,
+ PI_4 = 0x84,
+ PI_5 = 0x85,
+ PI_6 = 0x86,
+ PI_7 = 0x87,
+ PI_8 = 0x88,
+ PI_9 = 0x89,
+ PI_10 = 0x8A,
+ PI_11 = 0x8B,
+ PI_12 = 0x8C,
+ PI_13 = 0x8D,
+ PI_14 = 0x8E,
+ PI_15 = 0x8F,
+
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_3,
+ A2 = PA_4,
+ A3 = PA_5,
+ A4 = PA_6,
+ A5 = PB_0,
+ A6 = PB_1,
+ A7 = PC_0,
+ D0 = PD_3,
+ D1 = PD_6,
+ D2 = PD_11,
+ D3 = PD_12,
+ D4 = PD_13,
+ D5 = PA_8,
+ D6 = PB_6,
+ D7 = PB_7,
+ D8 = PB_15,
+ D9 = PB_14,
+ D10 = PA_15,
+ D11 = PB_5,
+ D12 = PB_4,
+ D13 = PB_3,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PB_3,
+ LED2 = PD_8,
+ LED3 = PD_9,
+ LED4 = PD_10,
+ USBTX = PC_6, /* USART6 */
+ USBRX = PC_7,
+ I2C_SCL = PB_8, /* I2C1 */
+ I2C_SDA = PB_9,
+ SPI_MOSI = PC_3,
+ SPI_MISO = PC_2,
+ SPI_SCK = PB_10,
+ SPI_CS = PE_3,
+ SD_MOSI = PC_3,
+ SD_MISO = PC_2,
+ SD_SCK = PB_10,
+ SD_CS = PE_2,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,52 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortF = 5,
+ PortG = 6,
+ PortH = 7,
+ PortI = 8
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,190 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,173 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_0 = 0x30,
+ PD_1 = 0x31,
+ PD_2 = 0x32,
+ PD_3 = 0x33,
+ PD_4 = 0x34,
+ PD_5 = 0x35,
+ PD_6 = 0x36,
+ PD_7 = 0x37,
+ PD_8 = 0x38,
+ PD_9 = 0x39,
+ PD_10 = 0x3A,
+ PD_11 = 0x3B,
+ PD_12 = 0x3C,
+ PD_13 = 0x3D,
+ PD_14 = 0x3E,
+ PD_15 = 0x3F,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Generic signals namings
+ LED1 = PD_12,
+ LED2 = PD_13,
+ LED3 = PD_14,
+ LED4 = PD_15,
+ USER_BUTTON = PA_0,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,88 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0,
+ DAC_1
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)UART4_BASE,
+ UART_5 = (int)UART5_BASE,
+ UART_6 = (int)USART6_BASE,
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,204 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+ {PA_4, DAC_0, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT1
+ {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT2
+ {NC, NC, 0}
+};
+
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PF_0 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PH_5 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PH_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PF_1 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PH_4 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,284 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_0 = 0x30,
+ PD_1 = 0x31,
+ PD_2 = 0x32,
+ PD_3 = 0x33,
+ PD_4 = 0x34,
+ PD_5 = 0x35,
+ PD_6 = 0x36,
+ PD_7 = 0x37,
+ PD_8 = 0x38,
+ PD_9 = 0x39,
+ PD_10 = 0x3A,
+ PD_11 = 0x3B,
+ PD_12 = 0x3C,
+ PD_13 = 0x3D,
+ PD_14 = 0x3E,
+ PD_15 = 0x3F,
+
+ PE_0 = 0x40,
+ PE_1 = 0x41,
+ PE_2 = 0x42,
+ PE_3 = 0x43,
+ PE_4 = 0x44,
+ PE_5 = 0x45,
+ PE_6 = 0x46,
+ PE_7 = 0x47,
+ PE_8 = 0x48,
+ PE_9 = 0x49,
+ PE_10 = 0x4A,
+ PE_11 = 0x4B,
+ PE_12 = 0x4C,
+ PE_13 = 0x4D,
+ PE_14 = 0x4E,
+ PE_15 = 0x4F,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_2 = 0x52,
+ PF_3 = 0x53,
+ PF_4 = 0x54,
+ PF_5 = 0x55,
+ PF_6 = 0x56,
+ PF_7 = 0x57,
+ PF_8 = 0x58,
+ PF_9 = 0x59,
+ PF_10 = 0x5A,
+ PF_11 = 0x5B,
+ PF_12 = 0x5C,
+ PF_13 = 0x5D,
+ PF_14 = 0x5E,
+ PF_15 = 0x5F,
+
+ PG_0 = 0x60,
+ PG_1 = 0x61,
+ PG_2 = 0x62,
+ PG_3 = 0x63,
+ PG_4 = 0x64,
+ PG_5 = 0x65,
+ PG_6 = 0x66,
+ PG_7 = 0x67,
+ PG_8 = 0x68,
+ PG_9 = 0x69,
+ PG_10 = 0x6A,
+ PG_11 = 0x6B,
+ PG_12 = 0x6C,
+ PG_13 = 0x6D,
+ PG_14 = 0x6E,
+ PG_15 = 0x6F,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+ PH_2 = 0x72,
+ PH_3 = 0x73,
+ PH_4 = 0x74,
+ PH_5 = 0x75,
+ PH_6 = 0x76,
+ PH_7 = 0x77,
+ PH_8 = 0x78,
+ PH_9 = 0x79,
+ PH_10 = 0x7A,
+ PH_11 = 0x7B,
+ PH_12 = 0x7C,
+ PH_13 = 0x7D,
+ PH_14 = 0x7E,
+ PH_15 = 0x7F,
+
+ PI_0 = 0x80,
+ PI_1 = 0x81,
+ PI_2 = 0x82,
+ PI_3 = 0x83,
+ PI_4 = 0x84,
+ PI_5 = 0x85,
+ PI_6 = 0x86,
+ PI_7 = 0x87,
+ PI_8 = 0x88,
+ PI_9 = 0x89,
+ PI_10 = 0x8A,
+ PI_11 = 0x8B,
+ PI_12 = 0x8C,
+ PI_13 = 0x8D,
+ PI_14 = 0x8E,
+ PI_15 = 0x8F,
+
+
+ // Arduino connector namings
+/*
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+*/
+ // Generic signals namings
+ LED1 = PD_13,
+ LED2 = PD_12,
+ LED3 = PD_13,
+ LED4 = PD_12,
+ LED5 = PD_14,
+ LED6 = PD_15,
+ USER_BUTTON = PA_0,
+ SERIAL_TX = PA_2, /* USART2 */
+ SERIAL_RX = PA_3,
+ USBTX = PA_2, /* USART2 */
+ USBRX = PA_3,
+ I2C_SCL = PB_8, /* I2C1 */
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,52 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortF = 5,
+ PortG = 6,
+ PortH = 7,
+ PortI = 8
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,96 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE,
+ ADC_2 = (int)ADC2_BASE,
+ ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0,
+ DAC_1
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)UART4_BASE,
+ UART_5 = (int)UART5_BASE,
+ UART_6 = (int)USART6_BASE,
+ UART_7 = (int)UART7_BASE,
+ UART_8 = (int)UART8_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_9
+#define STDIO_UART_RX PA_10
+#define STDIO_UART UART_1
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE,
+ SPI_6 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_8 = (int)TIM8_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,285 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {PF_3, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN9
+ {PF_4, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN14
+ {PF_5, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN15
+ {PF_6, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN4
+ {PF_7, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN5
+ {PF_8, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN6
+ {PF_9, ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN7
+ {PF_10,ADC_3, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC3_IN8
+ {NC, NC, 0}
+};
+
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+ {PA_4, DAC_0, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT1
+ {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT2
+ {NC, NC, 0}
+};
+
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PH_5, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PH_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PH_4, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PH_7, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_5, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM8)}, // TIM8_CH1N
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+// {PA_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1N
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+// {PB_0, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+// {PB_1, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3N
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+ {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_14, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_15, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+// {PC_6, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+// {PC_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+// {PC_8, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+// {PC_9, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH4
+
+ {PD_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
+ {PD_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PD_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+ {PD_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+
+ {PE_5, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PE_6, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+
+ {PE_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PE_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PE_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+ {PE_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PE_12, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+ {PE_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PE_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+
+ {PH_13, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1N
+ {PH_14, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
+ {PH_15, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3N
+
+ {PI_2, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH4
+ {PI_5, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1
+ {PI_6, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2
+ {PI_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PE_1, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ {PE_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+ {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+ {PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PE_0, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ {PE_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+ {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+ {PG_9, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+// {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)}, // error in datasheet?
+ {PE_6, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PF_11, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PG_14, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ {PI_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PE_5, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PG_12, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ {PH_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PH_5, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PI_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PE_2, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PG_13, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ {PH_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PI_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+ {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PE_4, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PG_8, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ {PH_5, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PI_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,314 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_0 = 0x30,
+ PD_1 = 0x31,
+ PD_2 = 0x32,
+ PD_3 = 0x33,
+ PD_4 = 0x34,
+ PD_5 = 0x35,
+ PD_6 = 0x36,
+ PD_7 = 0x37,
+ PD_8 = 0x38,
+ PD_9 = 0x39,
+ PD_10 = 0x3A,
+ PD_11 = 0x3B,
+ PD_12 = 0x3C,
+ PD_13 = 0x3D,
+ PD_14 = 0x3E,
+ PD_15 = 0x3F,
+
+ PE_0 = 0x40,
+ PE_1 = 0x41,
+ PE_2 = 0x42,
+ PE_3 = 0x43,
+ PE_4 = 0x44,
+ PE_5 = 0x45,
+ PE_6 = 0x46,
+ PE_7 = 0x47,
+ PE_8 = 0x48,
+ PE_9 = 0x49,
+ PE_10 = 0x4A,
+ PE_11 = 0x4B,
+ PE_12 = 0x4C,
+ PE_13 = 0x4D,
+ PE_14 = 0x4E,
+ PE_15 = 0x4F,
+
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_2 = 0x52,
+ PF_3 = 0x53,
+ PF_4 = 0x54,
+ PF_5 = 0x55,
+ PF_6 = 0x56,
+ PF_7 = 0x57,
+ PF_8 = 0x58,
+ PF_9 = 0x59,
+ PF_10 = 0x5A,
+ PF_11 = 0x5B,
+ PF_12 = 0x5C,
+ PF_13 = 0x5D,
+ PF_14 = 0x5E,
+ PF_15 = 0x5F,
+
+
+ PG_0 = 0x60,
+ PG_1 = 0x61,
+ PG_2 = 0x62,
+ PG_3 = 0x63,
+ PG_4 = 0x64,
+ PG_5 = 0x65,
+ PG_6 = 0x66,
+ PG_7 = 0x67,
+ PG_8 = 0x68,
+ PG_9 = 0x69,
+ PG_10 = 0x6A,
+ PG_11 = 0x6B,
+ PG_12 = 0x6C,
+ PG_13 = 0x6D,
+ PG_14 = 0x6E,
+ PG_15 = 0x6F,
+
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+ PH_2 = 0x72,
+ PH_3 = 0x73,
+ PH_4 = 0x74,
+ PH_5 = 0x75,
+ PH_6 = 0x76,
+ PH_7 = 0x77,
+ PH_8 = 0x78,
+ PH_9 = 0x79,
+ PH_10 = 0x7A,
+ PH_11 = 0x7B,
+ PH_12 = 0x7C,
+ PH_13 = 0x7D,
+ PH_14 = 0x7E,
+ PH_15 = 0x7F,
+
+
+ PI_0 = 0x80,
+ PI_1 = 0x81,
+ PI_2 = 0x82,
+ PI_3 = 0x83,
+ PI_4 = 0x84,
+ PI_5 = 0x85,
+ PI_6 = 0x86,
+ PI_7 = 0x87,
+ PI_8 = 0x88,
+ PI_9 = 0x89,
+ PI_10 = 0x8A,
+ PI_11 = 0x8B,
+ PI_12 = 0x8C,
+ PI_13 = 0x8D,
+ PI_14 = 0x8E,
+ PI_15 = 0x8F,
+
+
+ PJ_0 = 0x90,
+ PJ_1 = 0x91,
+ PJ_2 = 0x92,
+ PJ_3 = 0x93,
+ PJ_4 = 0x94,
+ PJ_5 = 0x95,
+ PJ_6 = 0x96,
+ PJ_7 = 0x97,
+ PJ_8 = 0x98,
+ PJ_9 = 0x99,
+ PJ_10 = 0x9A,
+ PJ_11 = 0x9B,
+ PJ_12 = 0x9C,
+ PJ_13 = 0x9D,
+ PJ_14 = 0x9E,
+ PJ_15 = 0x9F,
+
+
+ PK_0 = 0xA0,
+ PK_1 = 0xA1,
+ PK_2 = 0xA2,
+ PK_3 = 0xA3,
+ PK_4 = 0xA4,
+ PK_5 = 0xA5,
+ PK_6 = 0xA6,
+ PK_7 = 0xA7,
+
+ // Arduino connector namings
+/*
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+*/
+
+ // Generic signals namings
+ LED1 = PG_13,
+ LED2 = PG_14,
+ LED3 = PG_13,
+ LED4 = PG_14,
+ USER_BUTTON = PA_0,
+ SERIAL_TX = PA_9,
+ SERIAL_RX = PA_10,
+ USBTX = PA_9,
+ USBRX = PA_10,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PA_4,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortF = 5,
+ PortG = 6,
+ PortH = 7,
+ PortI = 8,
+ PortJ = 9,
+ PortK = 10
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PB_6
+#define STDIO_UART_RX PB_7
+#define STDIO_UART UART_1
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,205 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
+ {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
+ {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
+// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,184 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PC_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PC_9,
+ D3 = PB_15,
+ D4 = PA_8,
+ D5 = PA_7,
+ D6 = PB_13,
+ D7 = PC_2,
+ D8 = PA_9,
+ D9 = PB_1,
+ D10 = PC_8,
+ D11 = PB_5,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = D3,
+ LED2 = D3,
+ LED3 = D3,
+ LED4 = D3,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PB_6,
+ SERIAL_RX = PB_7,
+ USBTX = SERIAL_TX,
+ USBRX = SERIAL_RX,
+ RADIO_TX = PC_7,
+ RADIO_RX = PC_6,
+ I2C_SCL = D15,
+ I2C_SDA = D14,
+ SPI_MOSI = PC_12,
+ SPI_MISO = PC_11,
+ SPI_SCK = PC_10,
+ SPI_CS1 = PA_4,
+ SPI_CS2 = PB_14,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,91 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE,
+ ADC_2 = (int)ADC2_BASE,
+ ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0,
+ DAC_1
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)UART4_BASE,
+ UART_5 = (int)UART5_BASE,
+ UART_6 = (int)USART6_BASE,
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_8 = (int)TIM8_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,215 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+ {PA_4, DAC_0, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT1
+ {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT2
+ {NC, NC, 0}
+};
+
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_5, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM8)}, // TIM8_CH1N
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+// {PA_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1N
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+// {PB_0, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+// {PB_1, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3N
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+ {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_14, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_15, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+// {PC_6, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+// {PC_7, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH2
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+// {PC_8, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+// {PC_9, PWM_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8)}, // TIM8_CH4
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,157 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Generic signals namings
+ LED1 = PA_9,
+ LED2 = PA_9,
+ LED3 = PA_9,
+ LED4 = PA_9,
+ SERIAL_TX = PA_9,
+ SERIAL_RX = PA_10,
+ I2C_SCL = PA_8,
+ I2C_SDA = PC_9,
+ SPI_MOSI = PC_12,
+ SPI_MISO = PC_11,
+ SPI_SCK = PC_10,
+ SPI_CS = PC_13,
+ PWM0 = PA_8,
+ PWM1 = PC_9,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,52 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortF = 5,
+ PortG = 6,
+ PortH = 7,
+ PortI = 8
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,205 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
+ {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
+ {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
+// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,184 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Generic signals namings
+ DOUT = PA_2,
+ DIN = PA_3,
+ AD0 = PB_1,
+ AD1 = PB_0,
+ AD2 = PA_5,
+ AD3 = PA_4,
+ AD4 = PA_7,
+ AD5 = PC_1,
+ AD6 = PA_1,
+ DIO0 = PB_1,
+ DIO1 = PB_0,
+ DIO2 = PA_5,
+ DIO3 = PA_4,
+ DIO4 = PA_7,
+ DIO5 = PC_1,
+ DIO6 = PA_1,
+ DO8 = PA_6,
+ DI8 = PA_11,
+ PWM0 = PA_8,
+ PWM1 = PC_9,
+ NCTS = PA_0,
+ RTS = PA_1,
+ NDTR = PA_11,
+ RSSI = PA_8,
+ SLEEPRQ = PA_11,
+ ON_SLEEP = PA_12,
+ ASSOCIATE = PC_1,
+
+ LED1 = PA_2,
+ LED2 = PA_2,
+ LED3 = PA_2,
+ LED4 = PA_2,
+ SERIAL_TX = PA_9,
+ SERIAL_RX = PA_10,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PA_8,
+ I2C_SDA = PC_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PA_4,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,190 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,182 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PeripheralNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PeripheralPins.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,205 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have also to modify the corresponding xxx_api.c file
+// for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+ {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
+ {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
+ {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
+ {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+ {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+ {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
+ {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
+ {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
+ {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+ {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+ {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
+ {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
+ {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+ {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+ {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
+ {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
+ {NC, NC, 0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+ {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
+ {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
+ {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
+ {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+ {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
+ {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {NC, NC, 0}
+};
+
+//*** PWM ***
+
+// TIM5 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+ {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
+ {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
+// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
+ {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
+// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
+// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
+ {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
+// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
+// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
+ {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+ {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
+// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
+ {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
+ {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
+ {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
+ {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
+
+ {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+ {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
+ {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
+ {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
+ {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
+ {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
+ {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
+// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
+ {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
+// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
+ {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
+ {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
+ {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
+ {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
+
+ {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
+ {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
+ {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
+ {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
+
+ {NC, NC, 0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+ {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+ {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+ {NC, NC, 0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+ {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
+ {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
+ {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
+ {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
+ {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NC, 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
+ {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
+// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
+ {NC, NC, 0}
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PinNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,182 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PortNames.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/device.h Thu Jan 08 12:00:08 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/objects.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,169 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "mbed_assert.h"
+#include "analogin_api.h"
+
+#if DEVICE_ANALOGIN
+
+#include "wait_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+ADC_HandleTypeDef AdcHandle;
+
+int adc_inited = 0;
+
+void analogin_init(analogin_t *obj, PinName pin)
+{
+ // Get the peripheral name from the pin and assign it to the object
+ obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
+ MBED_ASSERT(obj->adc != (ADCName)NC);
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_ADC);
+
+ // Save pin number for the read function
+ obj->pin = pin;
+
+ // The ADC initialization is done once
+ if (adc_inited == 0) {
+ adc_inited = 1;
+
+ // Enable ADC clock
+ __ADC1_CLK_ENABLE();
+
+ // Configure ADC
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+ AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
+ AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
+ AdcHandle.Init.ScanConvMode = DISABLE;
+ AdcHandle.Init.ContinuousConvMode = DISABLE;
+ AdcHandle.Init.DiscontinuousConvMode = DISABLE;
+ AdcHandle.Init.NbrOfDiscConversion = 0;
+ AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+ AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
+ AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+ AdcHandle.Init.NbrOfConversion = 1;
+ AdcHandle.Init.DMAContinuousRequests = DISABLE;
+ AdcHandle.Init.EOCSelection = DISABLE;
+ HAL_ADC_Init(&AdcHandle);
+ }
+}
+
+static inline uint16_t adc_read(analogin_t *obj)
+{
+ ADC_ChannelConfTypeDef sConfig;
+
+ AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+
+ // Configure ADC channel
+ sConfig.Rank = 1;
+ sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
+ sConfig.Offset = 0;
+
+ switch (obj->pin) {
+ case PA_0:
+ sConfig.Channel = ADC_CHANNEL_0;
+ break;
+ case PA_1:
+ sConfig.Channel = ADC_CHANNEL_1;
+ break;
+ case PA_2:
+ sConfig.Channel = ADC_CHANNEL_2;
+ break;
+ case PA_3:
+ sConfig.Channel = ADC_CHANNEL_3;
+ break;
+ case PA_4:
+ sConfig.Channel = ADC_CHANNEL_4;
+ break;
+ case PA_5:
+ sConfig.Channel = ADC_CHANNEL_5;
+ break;
+ case PA_6:
+ sConfig.Channel = ADC_CHANNEL_6;
+ break;
+ case PA_7:
+ sConfig.Channel = ADC_CHANNEL_7;
+ break;
+ case PB_0:
+ sConfig.Channel = ADC_CHANNEL_8;
+ break;
+ case PB_1:
+ sConfig.Channel = ADC_CHANNEL_9;
+ break;
+ case PC_0:
+ sConfig.Channel = ADC_CHANNEL_10;
+ break;
+ case PC_1:
+ sConfig.Channel = ADC_CHANNEL_11;
+ break;
+ case PC_2:
+ sConfig.Channel = ADC_CHANNEL_12;
+ break;
+ case PC_3:
+ sConfig.Channel = ADC_CHANNEL_13;
+ break;
+ case PC_4:
+ sConfig.Channel = ADC_CHANNEL_14;
+ break;
+ case PC_5:
+ sConfig.Channel = ADC_CHANNEL_15;
+ break;
+ default:
+ return 0;
+ }
+
+ HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
+
+ HAL_ADC_Start(&AdcHandle); // Start conversion
+
+ // Wait end of conversion and get value
+ if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
+ return (HAL_ADC_GetValue(&AdcHandle));
+ } else {
+ return 0;
+ }
+}
+
+uint16_t analogin_read_u16(analogin_t *obj)
+{
+ uint16_t value = adc_read(obj);
+ // 12-bit to 16-bit conversion
+ value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
+ return value;
+}
+
+float analogin_read(analogin_t *obj)
+{
+ uint16_t value = adc_read(obj);
+ return (float)value * (1.0f / (float)0xFFF); // 12 bits range
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,156 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "analogout_api.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "stm32f4xx_hal.h"
+#include "PeripheralPins.h"
+
+#define RANGE_12BIT (0xFFF)
+
+DAC_HandleTypeDef DacHandle;
+static DAC_ChannelConfTypeDef sConfig;
+
+void analogout_init(dac_t *obj, PinName pin)
+{
+ uint32_t channel ;
+ HAL_StatusTypeDef status;
+
+ // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
+ obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
+
+ if (obj->dac == (DACName)NC) {
+ error("DAC pin mapping failed");
+ }
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_DAC);
+
+ // Save the channel for the write and read functions
+ obj->channel = pin;
+
+ __GPIOA_CLK_ENABLE();
+
+ __DAC_CLK_ENABLE();
+
+ DacHandle.Instance = DAC;
+
+ status = HAL_DAC_Init(&DacHandle);
+ if ( status != HAL_OK ) {
+ error("HAL_DAC_Init failed");
+ }
+
+ sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
+ sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+
+ if (obj->channel == PA_4) {
+ channel = DAC_CHANNEL_1;
+ } else {
+ channel = DAC_CHANNEL_2;
+ }
+
+ if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
+ error("HAL_DAC_ConfigChannel failed");
+ }
+
+ if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
+ error("HAL_DAC_Start failed");
+ }
+
+ if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
+ error("HAL_DAC_SetValue failed");
+ }
+
+}
+
+void analogout_free(dac_t *obj)
+{
+}
+
+static inline void dac_write(dac_t *obj, uint16_t value)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ if (obj->channel == PA_4) {
+ status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
+ } else if (obj->channel == PA_5) {
+ status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
+ }
+
+ if ( status != HAL_OK ) {
+ error("ADC pin mapping failed");
+ }
+}
+
+static inline int dac_read(dac_t *obj)
+{
+ if (obj->channel == PA_4) {
+ return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
+ } else if (obj->channel == PA_5) {
+ return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
+ }
+ return 0; /* Just silented warning */
+}
+
+void analogout_write(dac_t *obj, float value)
+{
+ if (value < 0.0f) {
+ dac_write(obj, 0); // Min value
+ } else if (value > 1.0f) {
+ dac_write(obj, (uint16_t)RANGE_12BIT); // Max value
+ } else {
+ dac_write(obj, (uint16_t)(value * (float)RANGE_12BIT));
+ }
+}
+
+void analogout_write_u16(dac_t *obj, uint16_t value)
+{
+ if (value > (uint16_t)RANGE_12BIT) {
+ value = (uint16_t)RANGE_12BIT; // Max value
+ }
+
+ dac_write(obj, value);
+}
+
+float analogout_read(dac_t *obj)
+{
+
+ uint32_t value = dac_read(obj);
+ return (float)value * (1.0f / (float)RANGE_12BIT);
+}
+
+uint16_t analogout_read_u16(dac_t *obj)
+{
+ return (uint16_t)dac_read(obj);
+}
+
+#endif // DEVICE_ANALOGOUT
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "gpio_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+uint32_t gpio_set(PinName pin)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+
+ pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
+}
+
+void gpio_init(gpio_t *obj, PinName pin)
+{
+ obj->pin = pin;
+ if (pin == (PinName)NC)
+ return;
+
+ uint32_t port_index = STM_PORT(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Fill GPIO object structure for future use
+ obj->mask = gpio_set(pin);
+ obj->reg_in = &gpio->IDR;
+ obj->reg_set = &gpio->BSRRL;
+ obj->reg_clr = &gpio->BSRRH;
+}
+
+void gpio_mode(gpio_t *obj, PinMode mode)
+{
+ pin_mode(obj->pin, mode);
+}
+
+void gpio_dir(gpio_t *obj, PinDirection direction)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (direction == PIN_OUTPUT) {
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+ } else { // PIN_INPUT
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,332 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include <stddef.h>
+#include "cmsis.h"
+#include "gpio_irq_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+#define EDGE_NONE (0)
+#define EDGE_RISE (1)
+#define EDGE_FALL (2)
+#define EDGE_BOTH (3)
+
+// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
+#define CHANNEL_NUM (7)
+
+// Max pins for one line (max with EXTI10_15)
+#define MAX_PIN_LINE (6)
+
+typedef struct gpio_channel {
+ uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
+ uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
+ uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
+ uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
+} gpio_channel_t;
+
+static gpio_channel_t channels[CHANNEL_NUM] = {
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0},
+ {.pin_mask = 0}
+};
+
+// Used to return the index for channels array.
+static uint32_t pin_base_nr[16] = {
+ // EXTI0
+ 0, // pin 0
+ // EXTI1
+ 0, // pin 1
+ // EXTI2
+ 0, // pin 2
+ // EXTI3
+ 0, // pin 3
+ // EXTI4
+ 0, // pin 4
+ // EXTI5_9
+ 0, // pin 5
+ 1, // pin 6
+ 2, // pin 7
+ 3, // pin 8
+ 4, // pin 9
+ // EXTI10_15
+ 0, // pin 10
+ 1, // pin 11
+ 2, // pin 12
+ 3, // pin 13
+ 4, // pin 14
+ 5 // pin 15
+};
+
+static gpio_irq_handler irq_handler;
+
+static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
+{
+ gpio_channel_t *gpio_channel = &channels[irq_index];
+ uint32_t gpio_idx;
+
+ for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
+ uint32_t current_mask = (1 << gpio_idx);
+
+ if (gpio_channel->pin_mask & current_mask) {
+ // Retrieve the gpio and pin that generate the irq
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
+ uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
+
+ // Clear interrupt flag
+ if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
+ __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
+
+ if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
+
+ // Check which edge has generated the irq
+ if ((gpio->IDR & pin) == 0) {
+ irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
+ } else {
+ irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
+ }
+ }
+ }
+ }
+}
+
+// EXTI line 0
+static void gpio_irq0(void)
+{
+ handle_interrupt_in(0, 1);
+}
+
+// EXTI line 1
+static void gpio_irq1(void)
+{
+ handle_interrupt_in(1, 1);
+}
+
+// EXTI line 2
+static void gpio_irq2(void)
+{
+ handle_interrupt_in(2, 1);
+}
+
+// EXTI line 3
+static void gpio_irq3(void)
+{
+ handle_interrupt_in(3, 1);
+}
+
+// EXTI line 4
+static void gpio_irq4(void)
+{
+ handle_interrupt_in(4, 1);
+}
+
+// EXTI lines 5 to 9
+static void gpio_irq5(void)
+{
+ handle_interrupt_in(5, 5);
+}
+
+// EXTI lines 10 to 15
+static void gpio_irq6(void)
+{
+ handle_interrupt_in(6, 6);
+}
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
+{
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+ uint32_t irq_index;
+ gpio_channel_t *gpio_channel;
+ uint32_t gpio_idx;
+
+ if (pin == NC) return -1;
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Select irq number and interrupt routine
+ switch (pin_index) {
+ case 0:
+ irq_n = EXTI0_IRQn;
+ vector = (uint32_t)&gpio_irq0;
+ irq_index = 0;
+ break;
+ case 1:
+ irq_n = EXTI1_IRQn;
+ vector = (uint32_t)&gpio_irq1;
+ irq_index = 1;
+ break;
+ case 2:
+ irq_n = EXTI2_IRQn;
+ vector = (uint32_t)&gpio_irq2;
+ irq_index = 2;
+ break;
+ case 3:
+ irq_n = EXTI3_IRQn;
+ vector = (uint32_t)&gpio_irq3;
+ irq_index = 3;
+ break;
+ case 4:
+ irq_n = EXTI4_IRQn;
+ vector = (uint32_t)&gpio_irq4;
+ irq_index = 4;
+ break;
+ case 5:
+ case 6:
+ case 7:
+ case 8:
+ case 9:
+ irq_n = EXTI9_5_IRQn;
+ vector = (uint32_t)&gpio_irq5;
+ irq_index = 5;
+ break;
+ case 10:
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ case 15:
+ irq_n = EXTI15_10_IRQn;
+ vector = (uint32_t)&gpio_irq6;
+ irq_index = 6;
+ break;
+ default:
+ error("InterruptIn error: pin not supported.\n");
+ return -1;
+ }
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+
+ // Configure GPIO
+ pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
+
+ // Enable EXTI interrupt
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+
+ // Save informations for future use
+ obj->irq_n = irq_n;
+ obj->irq_index = irq_index;
+ obj->event = EDGE_NONE;
+ obj->pin = pin;
+
+ gpio_channel = &channels[irq_index];
+ gpio_idx = pin_base_nr[pin_index];
+ gpio_channel->pin_mask |= (1 << gpio_idx);
+ gpio_channel->channel_ids[gpio_idx] = id;
+ gpio_channel->channel_gpio[gpio_idx] = gpio_add;
+ gpio_channel->channel_pin[gpio_idx] = pin_index;
+
+ irq_handler = handler;
+
+ return 0;
+}
+
+void gpio_irq_free(gpio_irq_t *obj)
+{
+ gpio_channel_t *gpio_channel = &channels[obj->irq_index];
+ uint32_t pin_index = STM_PIN(obj->pin);
+ uint32_t gpio_idx = pin_base_nr[pin_index];
+
+ gpio_channel->pin_mask &= ~(1 << gpio_idx);
+ gpio_channel->channel_ids[gpio_idx] = 0;
+ gpio_channel->channel_gpio[gpio_idx] = 0;
+ gpio_channel->channel_pin[gpio_idx] = 0;
+
+ // Disable EXTI line
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ obj->event = EDGE_NONE;
+}
+
+void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
+{
+ uint32_t mode = STM_MODE_IT_EVT_RESET;
+ uint32_t pull = GPIO_NOPULL;
+
+ if (enable) {
+ if (event == IRQ_RISE) {
+ if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING_FALLING;
+ obj->event = EDGE_BOTH;
+ } else { // NONE or RISE
+ mode = STM_MODE_IT_RISING;
+ obj->event = EDGE_RISE;
+ }
+ }
+ if (event == IRQ_FALL) {
+ if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING_FALLING;
+ obj->event = EDGE_BOTH;
+ } else { // NONE or FALL
+ mode = STM_MODE_IT_FALLING;
+ obj->event = EDGE_FALL;
+ }
+ }
+ } else { // Disable
+ if (event == IRQ_RISE) {
+ if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_FALLING;
+ obj->event = EDGE_FALL;
+ } else { // NONE or RISE
+ mode = STM_MODE_IT_EVT_RESET;
+ obj->event = EDGE_NONE;
+ }
+ }
+ if (event == IRQ_FALL) {
+ if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+ mode = STM_MODE_IT_RISING;
+ obj->event = EDGE_RISE;
+ } else { // NONE or FALL
+ mode = STM_MODE_IT_EVT_RESET;
+ obj->event = EDGE_NONE;
+ }
+ }
+ }
+
+ pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
+}
+
+void gpio_irq_enable(gpio_irq_t *obj)
+{
+ NVIC_EnableIRQ(obj->irq_n);
+}
+
+void gpio_irq_disable(gpio_irq_t *obj)
+{
+ NVIC_DisableIRQ(obj->irq_n);
+ obj->event = EDGE_NONE;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,71 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,495 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "i2c_api.h"
+
+#if DEVICE_I2C
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+/* Timeout values for flags and events waiting loops. These timeouts are
+ not based on accurate values, they just guarantee that the application will
+ not remain stuck if the I2C communication is corrupted. */
+#define FLAG_TIMEOUT ((int)0x1000)
+#define LONG_TIMEOUT ((int)0x8000)
+
+I2C_HandleTypeDef I2cHandle;
+
+int i2c1_inited = 0;
+int i2c2_inited = 0;
+int i2c3_inited = 0;
+
+void i2c_init(i2c_t *obj, PinName sda, PinName scl)
+{
+ // Determine the I2C to use
+ I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
+ I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
+
+ obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
+ MBED_ASSERT(obj->i2c != (I2CName)NC);
+
+ // Enable I2C1 clock and pinout if not done
+ if ((obj->i2c == I2C_1) && !i2c1_inited) {
+ i2c1_inited = 1;
+ __I2C1_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+ // Enable I2C2 clock and pinout if not done
+ if ((obj->i2c == I2C_2) && !i2c2_inited) {
+ i2c2_inited = 1;
+ __I2C2_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+ // Enable I2C3 clock and pinout if not done
+ if ((obj->i2c == I2C_3) && !i2c3_inited) {
+ i2c3_inited = 1;
+ __I2C3_CLK_ENABLE();
+ // Configure I2C pins
+ pinmap_pinout(sda, PinMap_I2C_SDA);
+ pinmap_pinout(scl, PinMap_I2C_SCL);
+ pin_mode(sda, OpenDrain);
+ pin_mode(scl, OpenDrain);
+ }
+
+ // Reset to clear pending flags if any
+ i2c_reset(obj);
+
+ // I2C configuration
+ i2c_frequency(obj, 100000); // 100 kHz per default
+
+ // I2C master by default
+ obj->slave = 0;
+}
+
+void i2c_frequency(i2c_t *obj, int hz)
+{
+ MBED_ASSERT((hz != 0) && (hz <= 400000));
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ // wait before init
+ timeout = LONG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+ // I2C configuration
+ I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+ I2cHandle.Init.ClockSpeed = hz;
+ I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
+ I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
+ I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
+ I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
+ I2cHandle.Init.OwnAddress1 = 0;
+ I2cHandle.Init.OwnAddress2 = 0;
+ HAL_I2C_Init(&I2cHandle);
+ if (obj->slave) {
+ /* Enable Address Acknowledge */
+ I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
+ }
+
+}
+
+inline int i2c_start(i2c_t *obj)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ // Clear Acknowledge failure flag
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
+
+ // Generate the START condition
+ i2c->CR1 |= I2C_CR1_START;
+
+ // Wait the START condition has been correctly sent
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ if ((timeout--) == 0) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+inline int i2c_stop(i2c_t *obj)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+
+ // Generate the STOP condition
+ i2c->CR1 |= I2C_CR1_STOP;
+
+ return 0;
+}
+
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+ int count;
+ int value;
+
+ i2c_start(obj);
+
+ // Wait until SB flag is set
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+
+ i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
+
+
+ // Wait address is acknowledged
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
+
+ // Read all bytes except last one
+ for (count = 0; count < (length - 1); count++) {
+ value = i2c_byte_read(obj, 0);
+ data[count] = (char)value;
+ }
+
+ // If not repeated start, send stop.
+ // Warning: must be done BEFORE the data is read.
+ if (stop) {
+ i2c_stop(obj);
+ }
+
+ // Read the last byte
+ value = i2c_byte_read(obj, 1);
+ data[count] = (char)value;
+
+ return length;
+}
+
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+ int count;
+
+ i2c_start(obj);
+
+ // Wait until SB flag is set
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+
+ i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
+
+
+ // Wait address is acknowledged
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
+ timeout--;
+ if (timeout == 0) {
+ return -1;
+ }
+ }
+ __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
+
+ for (count = 0; count < length; count++) {
+ if (i2c_byte_write(obj, data[count]) != 1) {
+ i2c_stop(obj);
+ return -1;
+ }
+ }
+
+ // If not repeated start, send stop.
+ if (stop) {
+ i2c_stop(obj);
+ }
+
+ return count;
+}
+
+int i2c_byte_read(i2c_t *obj, int last)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ if (last) {
+ // Don't acknowledge the last byte
+ i2c->CR1 &= ~I2C_CR1_ACK;
+ } else {
+ // Acknowledge the byte
+ i2c->CR1 |= I2C_CR1_ACK;
+ }
+
+ // Wait until the byte is received
+ timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
+ if ((timeout--) == 0) {
+ return -1;
+ }
+ }
+
+ return (int)i2c->DR;
+}
+
+int i2c_byte_write(i2c_t *obj, int data)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ int timeout;
+
+ i2c->DR = (uint8_t)data;
+
+ // Wait until the byte is transmitted
+ timeout = FLAG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
+ (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
+ if ((timeout--) == 0) {
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+void i2c_reset(i2c_t *obj)
+{
+ int timeout;
+
+ // wait before reset
+ timeout = LONG_TIMEOUT;
+ while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+ if (obj->i2c == I2C_1) {
+ __I2C1_FORCE_RESET();
+ __I2C1_RELEASE_RESET();
+ }
+ if (obj->i2c == I2C_2) {
+ __I2C2_FORCE_RESET();
+ __I2C2_RELEASE_RESET();
+ }
+ if (obj->i2c == I2C_3) {
+ __I2C3_FORCE_RESET();
+ __I2C3_RELEASE_RESET();
+ }
+}
+
+#if DEVICE_I2CSLAVE
+
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
+{
+ I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+ uint16_t tmpreg = 0;
+
+ // Get the old register value
+ tmpreg = i2c->OAR1;
+ // Reset address bits
+ tmpreg &= 0xFC00;
+ // Set new address
+ tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
+ // Store the new register value
+ i2c->OAR1 = tmpreg;
+}
+
+void i2c_slave_mode(i2c_t *obj, int enable_slave)
+{
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+ if (enable_slave) {
+ obj->slave = 1;
+ /* Enable Address Acknowledge */
+ I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
+ }
+}
+
+// See I2CSlave.h
+#define NoData 0 // the slave has not been addressed
+#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
+#define WriteGeneral 2 // the master is writing to all slave
+#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
+
+int i2c_slave_receive(i2c_t *obj)
+{
+ int retValue = NoData;
+
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
+ if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
+ retValue = ReadAddressed;
+ else
+ retValue = WriteAddressed;
+
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
+ }
+ }
+
+ return (retValue);
+}
+
+int i2c_slave_read(i2c_t *obj, char *data, int length)
+{
+ uint32_t Timeout;
+ int size = 0;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ while (length > 0) {
+ /* Wait until RXNE flag is set */
+ // Wait until the byte is received
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ /* Read data from DR */
+ (*data++) = I2cHandle.Instance->DR;
+ length--;
+ size++;
+
+ if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
+ /* Read data from DR */
+ (*data++) = I2cHandle.Instance->DR;
+ length--;
+ size++;
+ }
+ }
+
+ /* Wait until STOP flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
+
+ /* Wait until BUSY flag is reset */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ return size;
+}
+
+int i2c_slave_write(i2c_t *obj, const char *data, int length)
+{
+ uint32_t Timeout;
+ int size = 0;
+
+ I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+ while (length > 0) {
+ /* Wait until TXE flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+
+ /* Write data to DR */
+ I2cHandle.Instance->DR = (*data++);
+ length--;
+ size++;
+
+ if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
+ /* Write data to DR */
+ I2cHandle.Instance->DR = (*data++);
+ length--;
+ size++;
+ }
+ }
+
+ /* Wait until AF flag is set */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+
+ /* Clear AF flag */
+ __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
+
+
+ /* Wait until BUSY flag is reset */
+ Timeout = FLAG_TIMEOUT;
+ while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
+ Timeout--;
+ if (Timeout == 0) {
+ return -1;
+ }
+ }
+
+ I2cHandle.State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&I2cHandle);
+
+ return size;
+}
+
+
+#endif // DEVICE_I2CSLAVE
+
+#endif // DEVICE_I2C
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,37 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "cmsis.h"
+
+// This function is called after RAM initialization and before main.
+void mbed_sdk_init()
+{
+ // Update the SystemCoreClock variable.
+ SystemCoreClockUpdate();
+ // Need to restart HAL driver after the RAM is initialized
+ HAL_Init();
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,177 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "pinmap.h"
+#include "PortNames.h"
+#include "mbed_error.h"
+
+// GPIO mode look-up table
+static const uint32_t gpio_mode[13] = {
+ 0x00000000, // 0 = GPIO_MODE_INPUT
+ 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
+ 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
+ 0x00000002, // 3 = GPIO_MODE_AF_PP
+ 0x00000012, // 4 = GPIO_MODE_AF_OD
+ 0x00000003, // 5 = GPIO_MODE_ANALOG
+ 0x10110000, // 6 = GPIO_MODE_IT_RISING
+ 0x10210000, // 7 = GPIO_MODE_IT_FALLING
+ 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
+ 0x10120000, // 9 = GPIO_MODE_EVT_RISING
+ 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
+ 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
+ 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
+};
+
+// Enable GPIO clock and return GPIO base address
+uint32_t Set_GPIO_Clock(uint32_t port_idx)
+{
+ uint32_t gpio_add = 0;
+ switch (port_idx) {
+ case PortA:
+ gpio_add = GPIOA_BASE;
+ __GPIOA_CLK_ENABLE();
+ break;
+ case PortB:
+ gpio_add = GPIOB_BASE;
+ __GPIOB_CLK_ENABLE();
+ break;
+ case PortC:
+ gpio_add = GPIOC_BASE;
+ __GPIOC_CLK_ENABLE();
+ break;
+ case PortD:
+ gpio_add = GPIOD_BASE;
+ __GPIOD_CLK_ENABLE();
+ break;
+ case PortE:
+ gpio_add = GPIOE_BASE;
+ __GPIOE_CLK_ENABLE();
+ break;
+#if defined GPIOF_BASE
+ case PortF:
+ gpio_add = GPIOF_BASE;
+ __GPIOF_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOG_BASE
+ case PortG:
+ gpio_add = GPIOG_BASE;
+ __GPIOG_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOH_BASE
+ case PortH:
+ gpio_add = GPIOH_BASE;
+ __GPIOH_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOI_BASE
+ case PortI:
+ gpio_add = GPIOI_BASE;
+ __GPIOI_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOJ_BASE
+ case PortJ:
+ gpio_add = GPIOJ_BASE;
+ __GPIOJ_CLK_ENABLE();
+ break;
+#endif
+#if defined GPIOK_BASE
+ case PortK:
+ gpio_add = GPIOK_BASE;
+ __GPIOK_CLK_ENABLE();
+ break;
+#endif
+ default:
+ error("Pinmap error: wrong port number.");
+ break;
+ }
+ return gpio_add;
+}
+
+/**
+ * Configure pin (mode, speed, output type and pull-up/pull-down)
+ */
+void pin_function(PinName pin, int data)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+ // Get the pin informations
+ uint32_t mode = STM_PIN_MODE(data);
+ uint32_t pupd = STM_PIN_PUPD(data);
+ uint32_t afnum = STM_PIN_AFNUM(data);
+
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Configure GPIO
+ GPIO_InitTypeDef GPIO_InitStructure;
+ GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
+ GPIO_InitStructure.Mode = gpio_mode[mode];
+ GPIO_InitStructure.Pull = pupd;
+ GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
+ GPIO_InitStructure.Alternate = afnum;
+ HAL_GPIO_Init(gpio, &GPIO_InitStructure);
+
+ // [TODO] Disconnect JTAG-DP + SW-DP signals.
+ // Warning: Need to reconnect under reset
+ //if ((pin == PA_13) || (pin == PA_14)) {
+ //
+ //}
+ //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
+ //
+ //}
+}
+
+/**
+ * Configure pin pull-up/pull-down
+ */
+void pin_mode(PinName pin, PinMode mode)
+{
+ MBED_ASSERT(pin != (PinName)NC);
+ uint32_t port_index = STM_PORT(pin);
+ uint32_t pin_index = STM_PIN(pin);
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Configure pull-up/pull-down resistors
+ uint32_t pupd = (uint32_t)mode;
+ if (pupd > 2)
+ pupd = 0; // Open-drain = No pull-up/No pull-down
+ gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
+ gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
+
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "port_api.h"
+#include "pinmap.h"
+#include "gpio_api.h"
+#include "mbed_error.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
+// low nibble = pin number
+PinName port_pin(PortName port, int pin_n)
+{
+ return (PinName)(pin_n + (port << 4));
+}
+
+void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
+{
+ uint32_t port_index = (uint32_t)port;
+
+ // Enable GPIO clock
+ uint32_t gpio_add = Set_GPIO_Clock(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ // Fill PORT object structure for future use
+ obj->port = port;
+ obj->mask = mask;
+ obj->direction = dir;
+ obj->reg_in = &gpio->IDR;
+ obj->reg_out = &gpio->ODR;
+
+ port_dir(obj, dir);
+}
+
+void port_dir(port_t *obj, PinDirection dir)
+{
+ uint32_t i;
+ obj->direction = dir;
+ for (i = 0; i < 16; i++) { // Process all pins
+ if (obj->mask & (1 << i)) { // If the pin is used
+ if (dir == PIN_OUTPUT) {
+ pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+ } else { // PIN_INPUT
+ pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ }
+ }
+ }
+}
+
+void port_mode(port_t *obj, PinMode mode)
+{
+ uint32_t i;
+ for (i = 0; i < 16; i++) { // Process all pins
+ if (obj->mask & (1 << i)) { // If the pin is used
+ pin_mode(port_pin(obj->port, i), mode);
+ }
+ }
+}
+
+void port_write(port_t *obj, int value)
+{
+ *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
+}
+
+int port_read(port_t *obj)
+{
+ if (obj->direction == PIN_OUTPUT) {
+ return (*obj->reg_out & obj->mask);
+ } else { // PIN_INPUT
+ return (*obj->reg_in & obj->mask);
+ }
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,235 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "pwmout_api.h"
+
+#if DEVICE_PWMOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+static TIM_HandleTypeDef TimHandle;
+
+void pwmout_init(pwmout_t* obj, PinName pin)
+{
+ // Get the peripheral name from the pin and assign it to the object
+ obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
+
+ if (obj->pwm == (PWMName)NC) {
+ error("PWM error: pinout mapping failed.");
+ }
+
+ // Enable TIM clock
+ if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
+ if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
+ if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
+ if (obj->pwm == PWM_4) __TIM4_CLK_ENABLE();
+ if (obj->pwm == PWM_9) __TIM9_CLK_ENABLE();
+ if (obj->pwm == PWM_10) __TIM10_CLK_ENABLE();
+ if (obj->pwm == PWM_11) __TIM11_CLK_ENABLE();
+
+ // Configure GPIO
+ pinmap_pinout(pin, PinMap_PWM);
+
+ obj->pin = pin;
+ obj->period = 0;
+ obj->pulse = 0;
+
+ pwmout_period_us(obj, 20000); // 20 ms per default
+}
+
+void pwmout_free(pwmout_t* obj)
+{
+ // Configure GPIO
+ pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void pwmout_write(pwmout_t* obj, float value)
+{
+ TIM_OC_InitTypeDef sConfig;
+ int channel = 0;
+ int complementary_channel = 0;
+
+ TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+
+ if (value < (float)0.0) {
+ value = 0.0;
+ } else if (value > (float)1.0) {
+ value = 1.0;
+ }
+
+ obj->pulse = (uint32_t)((float)obj->period * value);
+
+ // Configure channels
+ sConfig.OCMode = TIM_OCMODE_PWM1;
+ sConfig.Pulse = obj->pulse;
+ sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
+ sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ sConfig.OCFastMode = TIM_OCFAST_DISABLE;
+ sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
+ sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+
+ switch (obj->pin) {
+
+ // Channels 1
+ case PA_0:
+ case PA_5:
+ case PA_6:
+ case PA_8:
+ case PA_15:
+ case PB_4:
+ case PB_6:
+ case PC_6:
+ channel = TIM_CHANNEL_1;
+ break;
+
+ // Channels 1N
+ case PA_7:
+ case PB_13:
+ channel = TIM_CHANNEL_1;
+ complementary_channel = 1;
+ break;
+
+ // Channels 2
+ case PA_1:
+ case PA_9:
+ case PB_3:
+ case PB_5:
+ case PB_7:
+ case PC_7:
+ channel = TIM_CHANNEL_2;
+ break;
+
+ // Channels 2N
+ case PB_0:
+ case PB_14:
+ channel = TIM_CHANNEL_2;
+ complementary_channel = 1;
+ break;
+
+ // Channels 3
+ case PA_2:
+ case PA_10:
+ case PB_8:
+ case PB_10:
+ case PC_8:
+ channel = TIM_CHANNEL_3;
+ break;
+
+ // Channels 3N
+ case PB_1:
+ case PB_15:
+ channel = TIM_CHANNEL_3;
+ complementary_channel = 1;
+ break;
+
+ // Channels 4
+ case PA_3:
+ case PA_11:
+ case PB_9:
+ case PC_9:
+ channel = TIM_CHANNEL_4;
+ break;
+
+ default:
+ return;
+ }
+
+ HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
+ if (complementary_channel) {
+ HAL_TIMEx_PWMN_Start(&TimHandle, channel);
+ } else {
+ HAL_TIM_PWM_Start(&TimHandle, channel);
+ }
+}
+
+float pwmout_read(pwmout_t* obj)
+{
+ float value = 0;
+ if (obj->period > 0) {
+ value = (float)(obj->pulse) / (float)(obj->period);
+ }
+ return ((value > (float)1.0) ? (float)(1.0) : (value));
+}
+
+void pwmout_period(pwmout_t* obj, float seconds)
+{
+ pwmout_period_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_period_ms(pwmout_t* obj, int ms)
+{
+ pwmout_period_us(obj, ms * 1000);
+}
+
+void pwmout_period_us(pwmout_t* obj, int us)
+{
+ TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+
+ float dc = pwmout_read(obj);
+
+ __HAL_TIM_DISABLE(&TimHandle);
+
+ // Update the SystemCoreClock variable
+ SystemCoreClockUpdate();
+
+ TimHandle.Init.Period = us - 1;
+ TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
+ TimHandle.Init.ClockDivision = 0;
+ TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ HAL_TIM_PWM_Init(&TimHandle);
+
+ // Set duty cycle again
+ pwmout_write(obj, dc);
+
+ // Save for future use
+ obj->period = us;
+
+ __HAL_TIM_ENABLE(&TimHandle);
+}
+
+void pwmout_pulsewidth(pwmout_t* obj, float seconds)
+{
+ pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
+{
+ pwmout_pulsewidth_us(obj, ms * 1000);
+}
+
+void pwmout_pulsewidth_us(pwmout_t* obj, int us)
+{
+ float value = (float)us / (float)obj->period;
+ pwmout_write(obj, value);
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,203 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "rtc_api.h"
+
+#if DEVICE_RTC
+
+#include "mbed_error.h"
+
+static int rtc_inited = 0;
+
+static RTC_HandleTypeDef RtcHandle;
+
+void rtc_init(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ uint32_t rtc_freq = 0;
+
+ if (rtc_inited) return;
+ rtc_inited = 1;
+
+ RtcHandle.Instance = RTC;
+
+ // Enable Power clock
+ __PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Enable LSE Oscillator
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
+ RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
+ // Connect LSE to RTC
+ __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
+ rtc_freq = LSE_VALUE;
+ } else {
+ // Enable LSI clock
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ error("RTC error: LSI clock initialization failed.");
+ }
+ // Connect LSI to RTC
+ __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
+ __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
+ // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
+ rtc_freq = LSI_VALUE;
+ }
+
+ // Enable RTC
+ __HAL_RCC_RTC_ENABLE();
+
+ RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
+ RtcHandle.Init.AsynchPrediv = 127;
+ RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
+ RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
+ RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+ RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+
+ if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
+ error("RTC error: RTC initialization failed.");
+ }
+}
+
+void rtc_free(void)
+{
+ // Enable Power clock
+ __PWR_CLK_ENABLE();
+
+ // Enable access to Backup domain
+ HAL_PWR_EnableBkUpAccess();
+
+ // Reset Backup domain
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+
+ // Disable access to Backup domain
+ HAL_PWR_DisableBkUpAccess();
+
+ // Disable LSI and LSE clocks
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
+ RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+ HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+ rtc_inited = 0;
+}
+
+int rtc_isenabled(void)
+{
+ return rtc_inited;
+}
+
+/*
+ RTC Registers
+ RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
+ RTC_Month 1=january, 2=february, ..., 12=december
+ RTC_Date day of the month 1-31
+ RTC_Year year 0-99
+ struct tm
+ tm_sec seconds after the minute 0-61
+ tm_min minutes after the hour 0-59
+ tm_hour hours since midnight 0-23
+ tm_mday day of the month 1-31
+ tm_mon months since January 0-11
+ tm_year years since 1900
+ tm_wday days since Sunday 0-6
+ tm_yday days since January 1 0-365
+ tm_isdst Daylight Saving Time flag
+*/
+time_t rtc_read(void)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+ struct tm timeinfo;
+
+ RtcHandle.Instance = RTC;
+
+ // Read actual date and time
+ // Warning: the time must be read first!
+ HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+ HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+
+ // Setup a tm structure based on the RTC
+ timeinfo.tm_wday = dateStruct.WeekDay;
+ timeinfo.tm_mon = dateStruct.Month - 1;
+ timeinfo.tm_mday = dateStruct.Date;
+ timeinfo.tm_year = dateStruct.Year + 100;
+ timeinfo.tm_hour = timeStruct.Hours;
+ timeinfo.tm_min = timeStruct.Minutes;
+ timeinfo.tm_sec = timeStruct.Seconds;
+
+ // Convert to timestamp
+ time_t t = mktime(&timeinfo);
+
+ return t;
+}
+
+void rtc_write(time_t t)
+{
+ RTC_DateTypeDef dateStruct;
+ RTC_TimeTypeDef timeStruct;
+
+ RtcHandle.Instance = RTC;
+
+ // Convert the time into a tm
+ struct tm *timeinfo = localtime(&t);
+
+ // Fill RTC structures
+ dateStruct.WeekDay = timeinfo->tm_wday;
+ dateStruct.Month = timeinfo->tm_mon + 1;
+ dateStruct.Date = timeinfo->tm_mday;
+ dateStruct.Year = timeinfo->tm_year - 100;
+ timeStruct.Hours = timeinfo->tm_hour;
+ timeStruct.Minutes = timeinfo->tm_min;
+ timeStruct.Seconds = timeinfo->tm_sec;
+ timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
+ timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
+ timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
+
+ // Change the RTC current date/time
+ HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+ HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,419 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include <string.h>
+#include "PeripheralPins.h"
+
+#define UART_NUM (6)
+
+static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0, 0};
+
+static uart_irq_handler irq_handler;
+
+UART_HandleTypeDef UartHandle;
+
+int stdio_uart_inited = 0;
+serial_t stdio_uart;
+
+static void init_uart(serial_t *obj)
+{
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+
+ UartHandle.Init.BaudRate = obj->baudrate;
+ UartHandle.Init.WordLength = obj->databits;
+ UartHandle.Init.StopBits = obj->stopbits;
+ UartHandle.Init.Parity = obj->parity;
+ UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+
+ if (obj->pin_rx == NC) {
+ UartHandle.Init.Mode = UART_MODE_TX;
+ } else if (obj->pin_tx == NC) {
+ UartHandle.Init.Mode = UART_MODE_RX;
+ } else {
+ UartHandle.Init.Mode = UART_MODE_TX_RX;
+ }
+
+ HAL_UART_Init(&UartHandle);
+}
+
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+ // Determine the UART to use (UART_1, UART_2, ...)
+ UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+ UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+
+ // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
+ obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+ MBED_ASSERT(obj->uart != (UARTName)NC);
+
+ // Enable USART clock
+ switch (obj->uart) {
+ case UART_1:
+ __USART1_CLK_ENABLE();
+ obj->index = 0;
+ break;
+ case UART_2:
+ __USART2_CLK_ENABLE();
+ obj->index = 1;
+ break;
+#if defined(USART3_BASE)
+ case UART_3:
+ __USART3_CLK_ENABLE();
+ obj->index = 2;
+ break;
+#endif
+#if defined(UART4_BASE)
+ case UART_4:
+ __UART4_CLK_ENABLE();
+ obj->index = 3;
+ break;
+#endif
+#if defined(UART5_BASE)
+ case UART_5:
+ __UART5_CLK_ENABLE();
+ obj->index = 4;
+ break;
+#endif
+ case UART_6:
+ __USART6_CLK_ENABLE();
+ obj->index = 5;
+ break;
+ }
+
+ // Configure the UART pins
+ pinmap_pinout(tx, PinMap_UART_TX);
+ pinmap_pinout(rx, PinMap_UART_RX);
+ if (tx != NC) {
+ pin_mode(tx, PullUp);
+ }
+ if (rx != NC) {
+ pin_mode(rx, PullUp);
+ }
+
+ // Configure UART
+ obj->baudrate = 9600;
+ obj->databits = UART_WORDLENGTH_8B;
+ obj->stopbits = UART_STOPBITS_1;
+ obj->parity = UART_PARITY_NONE;
+
+ obj->pin_tx = tx;
+ obj->pin_rx = rx;
+
+ init_uart(obj);
+
+ // For stdio management
+ if (obj->uart == STDIO_UART) {
+ stdio_uart_inited = 1;
+ memcpy(&stdio_uart, obj, sizeof(serial_t));
+ }
+}
+
+void serial_free(serial_t *obj)
+{
+ // Reset UART and disable clock
+ switch (obj->uart) {
+ case UART_1:
+ __USART1_FORCE_RESET();
+ __USART1_RELEASE_RESET();
+ __USART1_CLK_DISABLE();
+ break;
+ case UART_2:
+ __USART2_FORCE_RESET();
+ __USART2_RELEASE_RESET();
+ __USART2_CLK_DISABLE();
+ break;
+#if defined(USART3_BASE)
+ case UART_3:
+ __USART3_FORCE_RESET();
+ __USART3_RELEASE_RESET();
+ __USART3_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART4_BASE)
+ case UART_4:
+ __UART4_FORCE_RESET();
+ __UART4_RELEASE_RESET();
+ __UART4_CLK_DISABLE();
+ break;
+#endif
+#if defined(UART5_BASE)
+ case UART_5:
+ __UART5_FORCE_RESET();
+ __UART5_RELEASE_RESET();
+ __UART5_CLK_DISABLE();
+ break;
+#endif
+ case UART_6:
+ __USART6_FORCE_RESET();
+ __USART6_RELEASE_RESET();
+ __USART6_CLK_DISABLE();
+ break;
+ }
+ // Configure GPIOs
+ pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+
+ serial_irq_ids[obj->index] = 0;
+}
+
+void serial_baud(serial_t *obj, int baudrate)
+{
+ obj->baudrate = baudrate;
+ init_uart(obj);
+}
+
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+ if (data_bits == 9) {
+ obj->databits = UART_WORDLENGTH_9B;
+ } else {
+ obj->databits = UART_WORDLENGTH_8B;
+ }
+
+ switch (parity) {
+ case ParityOdd:
+ case ParityForced0:
+ obj->parity = UART_PARITY_ODD;
+ break;
+ case ParityEven:
+ case ParityForced1:
+ obj->parity = UART_PARITY_EVEN;
+ break;
+ default: // ParityNone
+ obj->parity = UART_PARITY_NONE;
+ break;
+ }
+
+ if (stop_bits == 2) {
+ obj->stopbits = UART_STOPBITS_2;
+ } else {
+ obj->stopbits = UART_STOPBITS_1;
+ }
+
+ init_uart(obj);
+}
+
+/******************************************************************************
+ * INTERRUPTS HANDLING
+ ******************************************************************************/
+
+static void uart_irq(UARTName name, int id)
+{
+ UartHandle.Instance = (USART_TypeDef *)name;
+ if (serial_irq_ids[id] != 0) {
+ if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
+ irq_handler(serial_irq_ids[id], TxIrq);
+ __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
+ }
+ if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
+ irq_handler(serial_irq_ids[id], RxIrq);
+ __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
+ }
+ }
+}
+
+static void uart1_irq(void)
+{
+ uart_irq(UART_1, 0);
+}
+
+static void uart2_irq(void)
+{
+ uart_irq(UART_2, 1);
+}
+
+#if defined(USART3_BASE)
+static void uart3_irq(void)
+{
+ uart_irq(UART_3, 2);
+}
+#endif
+
+#if defined(UART4_BASE)
+static void uart4_irq(void)
+{
+ uart_irq(UART_4, 3);
+}
+#endif
+
+#if defined(UART5_BASE)
+static void uart5_irq(void)
+{
+ uart_irq(UART_5, 4);
+}
+#endif
+
+static void uart6_irq(void)
+{
+ uart_irq(UART_6, 5);
+}
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+ irq_handler = handler;
+ serial_irq_ids[obj->index] = id;
+}
+
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+ IRQn_Type irq_n = (IRQn_Type)0;
+ uint32_t vector = 0;
+
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+
+ switch (obj->uart) {
+ case UART_1:
+ irq_n = USART1_IRQn;
+ vector = (uint32_t)&uart1_irq;
+ break;
+
+ case UART_2:
+ irq_n = USART2_IRQn;
+ vector = (uint32_t)&uart2_irq;
+ break;
+#if defined(USART3_BASE)
+ case UART_3:
+ irq_n = USART3_IRQn;
+ vector = (uint32_t)&uart3_irq;
+ break;
+#endif
+#if defined(UART4_BASE)
+ case UART_4:
+ irq_n = UART4_IRQn;
+ vector = (uint32_t)&uart4_irq;
+ break;
+#endif
+#if defined(UART5_BASE)
+ case UART_5:
+ irq_n = UART5_IRQn;
+ vector = (uint32_t)&uart5_irq;
+ break;
+#endif
+ case UART_6:
+ irq_n = USART6_IRQn;
+ vector = (uint32_t)&uart6_irq;
+ break;
+ }
+
+ if (enable) {
+
+ if (irq == RxIrq) {
+ __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
+ } else { // TxIrq
+ __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
+ }
+
+ NVIC_SetVector(irq_n, vector);
+ NVIC_EnableIRQ(irq_n);
+
+ } else { // disable
+
+ int all_disabled = 0;
+
+ if (irq == RxIrq) {
+ __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
+ // Check if TxIrq is disabled too
+ if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
+ } else { // TxIrq
+ __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
+ // Check if RxIrq is disabled too
+ if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
+ }
+
+ if (all_disabled) NVIC_DisableIRQ(irq_n);
+
+ }
+}
+
+/******************************************************************************
+ * READ/WRITE
+ ******************************************************************************/
+
+int serial_getc(serial_t *obj)
+{
+ USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
+ while (!serial_readable(obj));
+ return (int)(uart->DR & 0x1FF);
+}
+
+void serial_putc(serial_t *obj, int c)
+{
+ USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
+ while (!serial_writable(obj));
+ uart->DR = (uint32_t)(c & 0x1FF);
+}
+
+int serial_readable(serial_t *obj)
+{
+ int status;
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+ // Check if data is received
+ status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
+ return status;
+}
+
+int serial_writable(serial_t *obj)
+{
+ int status;
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+ // Check if data is transmitted
+ status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
+ return status;
+}
+
+void serial_clear(serial_t *obj)
+{
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+ __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
+ __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
+}
+
+void serial_pinout_tx(PinName tx)
+{
+ pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+void serial_break_set(serial_t *obj)
+{
+ UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+ HAL_LIN_SendBreak(&UartHandle);
+}
+
+void serial_break_clear(serial_t *obj)
+{
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,61 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "sleep_api.h"
+
+#if DEVICE_SLEEP
+
+#include "cmsis.h"
+
+static TIM_HandleTypeDef TimMasterHandle;
+
+void sleep(void)
+{
+ TimMasterHandle.Instance = TIM5;
+
+ // Disable HAL tick interrupt
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+ // Request to enter SLEEP mode
+ HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+
+ // Enable HAL tick interrupt
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+}
+
+void deepsleep(void)
+{
+ // Request to enter STOP mode with regulator in low power mode
+ HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
+ // After wake-up from STOP reconfigure the PLL
+ SetSysClock();
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,392 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "spi_api.h"
+
+#if DEVICE_SPI
+
+#include <math.h>
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+
+static SPI_HandleTypeDef SpiHandle;
+
+static void init_spi(spi_t *obj)
+{
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+
+ __HAL_SPI_DISABLE(&SpiHandle);
+
+ SpiHandle.Init.Mode = obj->mode;
+ SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
+ SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
+ SpiHandle.Init.CLKPhase = obj->cpha;
+ SpiHandle.Init.CLKPolarity = obj->cpol;
+ SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
+ SpiHandle.Init.CRCPolynomial = 7;
+ SpiHandle.Init.DataSize = obj->bits;
+ SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ SpiHandle.Init.NSS = obj->nss;
+ SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
+
+ HAL_SPI_Init(&SpiHandle);
+
+ __HAL_SPI_ENABLE(&SpiHandle);
+}
+
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
+{
+ // Determine the SPI to use
+ SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+ SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+ SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+ SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+
+ SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+ SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+
+ obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
+ MBED_ASSERT(obj->spi != (SPIName)NC);
+
+ // Enable SPI clock
+ if (obj->spi == SPI_1) {
+ __SPI1_CLK_ENABLE();
+ }
+
+ if (obj->spi == SPI_2) {
+ __SPI2_CLK_ENABLE();
+ }
+
+ if (obj->spi == SPI_3) {
+ __SPI3_CLK_ENABLE();
+ }
+
+#if defined SPI4_BASE
+ if (obj->spi == SPI_4) {
+ __SPI4_CLK_ENABLE();
+ }
+#endif
+
+#if defined SPI5_BASE
+ if (obj->spi == SPI_5) {
+ __SPI5_CLK_ENABLE();
+ }
+#endif
+
+ // Configure the SPI pins
+ pinmap_pinout(mosi, PinMap_SPI_MOSI);
+ pinmap_pinout(miso, PinMap_SPI_MISO);
+ pinmap_pinout(sclk, PinMap_SPI_SCLK);
+
+ // Save new values
+ obj->bits = SPI_DATASIZE_8BIT;
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_1EDGE;
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256;
+
+ obj->pin_miso = miso;
+ obj->pin_mosi = mosi;
+ obj->pin_sclk = sclk;
+ obj->pin_ssel = ssel;
+
+ if (ssel == NC) { // SW NSS Master mode
+ obj->mode = SPI_MODE_MASTER;
+ obj->nss = SPI_NSS_SOFT;
+ } else { // Slave
+ pinmap_pinout(ssel, PinMap_SPI_SSEL);
+ obj->mode = SPI_MODE_SLAVE;
+ obj->nss = SPI_NSS_HARD_INPUT;
+ }
+
+ init_spi(obj);
+}
+
+void spi_free(spi_t *obj)
+{
+ // Reset SPI and disable clock
+ if (obj->spi == SPI_1) {
+ __SPI1_FORCE_RESET();
+ __SPI1_RELEASE_RESET();
+ __SPI1_CLK_DISABLE();
+ }
+
+ if (obj->spi == SPI_2) {
+ __SPI2_FORCE_RESET();
+ __SPI2_RELEASE_RESET();
+ __SPI2_CLK_DISABLE();
+ }
+
+ if (obj->spi == SPI_3) {
+ __SPI3_FORCE_RESET();
+ __SPI3_RELEASE_RESET();
+ __SPI3_CLK_DISABLE();
+ }
+
+#if defined SPI4_BASE
+ if (obj->spi == SPI_4) {
+ __SPI4_FORCE_RESET();
+ __SPI4_RELEASE_RESET();
+ __SPI4_CLK_DISABLE();
+ }
+#endif
+
+#if defined SPI5_BASE
+ if (obj->spi == SPI_5) {
+ __SPI5_FORCE_RESET();
+ __SPI5_RELEASE_RESET();
+ __SPI5_CLK_DISABLE();
+ }
+#endif
+
+ // Configure GPIOs
+ pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+ pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void spi_format(spi_t *obj, int bits, int mode, int slave)
+{
+ // Save new values
+ if (bits == 16) {
+ obj->bits = SPI_DATASIZE_16BIT;
+ } else {
+ obj->bits = SPI_DATASIZE_8BIT;
+ }
+
+ switch (mode) {
+ case 0:
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_1EDGE;
+ break;
+ case 1:
+ obj->cpol = SPI_POLARITY_LOW;
+ obj->cpha = SPI_PHASE_2EDGE;
+ break;
+ case 2:
+ obj->cpol = SPI_POLARITY_HIGH;
+ obj->cpha = SPI_PHASE_1EDGE;
+ break;
+ default:
+ obj->cpol = SPI_POLARITY_HIGH;
+ obj->cpha = SPI_PHASE_2EDGE;
+ break;
+ }
+
+ if (slave == 0) {
+ obj->mode = SPI_MODE_MASTER;
+ obj->nss = SPI_NSS_SOFT;
+ } else {
+ obj->mode = SPI_MODE_SLAVE;
+ obj->nss = SPI_NSS_HARD_INPUT;
+ }
+
+ init_spi(obj);
+}
+
+void spi_frequency(spi_t *obj, int hz)
+{
+#if defined(TARGET_STM32F401RE) || defined(TARGET_STM32F401VC) || defined(TARGET_F407VG)
+ // Note: The frequencies are obtained with SPI1 clock = 84 MHz (APB2 clock)
+ if (hz < 600000) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 330 kHz
+ } else if ((hz >= 600000) && (hz < 1000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 656 kHz
+ } else if ((hz >= 1000000) && (hz < 2000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.3 MHz
+ } else if ((hz >= 2000000) && (hz < 5000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2.6 MHz
+ } else if ((hz >= 5000000) && (hz < 10000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 5.25 MHz
+ } else if ((hz >= 10000000) && (hz < 21000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 10.5 MHz
+ } else if ((hz >= 21000000) && (hz < 42000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 21 MHz
+ } else { // >= 42000000
+ obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 42 MHz
+ }
+#elif defined(TARGET_STM32F405RG)
+ // Note: The frequencies are obtained with SPI1 clock = 48 MHz (APB2 clock)
+ if (obj->spi == SPI_1) {
+ if (hz < 375000) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 187.5 kHz
+ } else if ((hz >= 375000) && (hz < 750000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
+ } else if ((hz >= 750000) && (hz < 1500000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 0.75 MHz
+ } else if ((hz >= 1500000) && (hz < 3000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
+ } else if ((hz >= 3000000) && (hz < 6000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
+ } else if ((hz >= 6000000) && (hz < 12000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
+ } else if ((hz >= 12000000) && (hz < 24000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
+ } else { // >= 24000000
+ obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
+ }
+ // Note: The frequencies are obtained with SPI2/3 clock = 48 MHz (APB1 clock)
+ } else if ((obj->spi == SPI_2) || (obj->spi == SPI_3)) {
+ if (hz < 375000) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 187.5 kHz
+ } else if ((hz >= 375000) && (hz < 750000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
+ } else if ((hz >= 750000) && (hz < 1500000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 0.75 MHz
+ } else if ((hz >= 1500000) && (hz < 3000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
+ } else if ((hz >= 3000000) && (hz < 6000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
+ } else if ((hz >= 6000000) && (hz < 12000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
+ } else if ((hz >= 12000000) && (hz < 24000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
+ } else { // >= 24000000
+ obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
+ }
+ }
+#elif defined(TARGET_STM32F411RE) || defined(TARGET_STM32F429ZI)
+ // Values depend of PCLK2: 100 MHz
+ if ((obj->spi == SPI_1) || (obj->spi == SPI_4) || (obj->spi == SPI_5)) {
+ if (hz < 700000) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 391 kHz
+ } else if ((hz >= 700000) && (hz < 1000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 781 kHz
+ } else if ((hz >= 1000000) && (hz < 3000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.56 MHz
+ } else if ((hz >= 3000000) && (hz < 6000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 3.13 MHz
+ } else if ((hz >= 6000000) && (hz < 12000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 6.25 MHz
+ } else if ((hz >= 12000000) && (hz < 25000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 12.5 MHz
+ } else if ((hz >= 25000000) && (hz < 50000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 25 MHz
+ } else { // >= 50000000
+ obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 50 MHz
+ }
+ }
+
+ // Values depend of PCLK1: 50 MHz
+ if ((obj->spi == SPI_2) || (obj->spi == SPI_3)) {
+ if (hz < 400000) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 195 kHz
+ } else if ((hz >= 400000) && (hz < 700000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 391 kHz
+ } else if ((hz >= 700000) && (hz < 1000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 781 MHz
+ } else if ((hz >= 1000000) && (hz < 3000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.56 MHz
+ } else if ((hz >= 3000000) && (hz < 6000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3.13 MHz
+ } else if ((hz >= 6000000) && (hz < 12000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6.25 MHz
+ } else if ((hz >= 12000000) && (hz < 25000000)) {
+ obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12.5 MHz
+ } else { // >= 25000000
+ obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 25 MHz
+ }
+ }
+#endif
+ init_spi(obj);
+}
+
+static inline int ssp_readable(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ // Check if data is received
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
+ return status;
+}
+
+static inline int ssp_writeable(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ // Check if data is transmitted
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
+ return status;
+}
+
+static inline void ssp_write(spi_t *obj, int value)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_writeable(obj));
+ spi->DR = (uint16_t)value;
+}
+
+static inline int ssp_read(spi_t *obj)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_readable(obj));
+ return (int)spi->DR;
+}
+
+static inline int ssp_busy(spi_t *obj)
+{
+ int status;
+ SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+ status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
+ return status;
+}
+
+int spi_master_write(spi_t *obj, int value)
+{
+ ssp_write(obj, value);
+ return ssp_read(obj);
+}
+
+int spi_slave_receive(spi_t *obj)
+{
+ return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
+};
+
+int spi_slave_read(spi_t *obj)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_readable(obj));
+ return (int)spi->DR;
+}
+
+void spi_slave_write(spi_t *obj, int value)
+{
+ SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+ while (!ssp_writeable(obj));
+ spi->DR = (uint16_t)value;
+}
+
+int spi_busy(spi_t *obj)
+{
+ return ssp_busy(obj);
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c Thu Jan 08 12:00:08 2015 +0000
@@ -0,0 +1,69 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+
+#define TIM_MST TIM5
+
+static TIM_HandleTypeDef TimMasterHandle;
+static int us_ticker_inited = 0;
+
+void us_ticker_init(void)
+{
+ if (us_ticker_inited) return;
+ us_ticker_inited = 1;
+
+ TimMasterHandle.Instance = TIM_MST;
+
+ HAL_InitTick(0); // The passed value is not used
+}
+
+uint32_t us_ticker_read()
+{
+ if (!us_ticker_inited) us_ticker_init();
+ return TIM_MST->CNT;
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp)
+{
+ // Set new output compare value
+ __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
+ // Enable IT
+ __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_disable_interrupt(void)
+{
+ __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_clear_interrupt(void)
+{
+ __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+}
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/PeripheralPins.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,204 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_0, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PF_0 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_5 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PH_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PF_1 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_4 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/PeripheralPins.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/PortNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,52 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/TARGET_ARCH_MAX/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,85 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PC_6
-#define STDIO_UART_RX PC_7
-#define STDIO_UART UART_6
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/TARGET_ARCH_MAX/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,283 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_3,
- A2 = PA_4,
- A3 = PA_5,
- A4 = PA_6,
- A5 = PB_0,
- A6 = PB_1,
- A7 = PC_0,
- D0 = PD_3,
- D1 = PD_6,
- D2 = PD_11,
- D3 = PD_12,
- D4 = PD_13,
- D5 = PA_8,
- D6 = PB_6,
- D7 = PB_7,
- D8 = PB_15,
- D9 = PB_14,
- D10 = PA_15,
- D11 = PB_5,
- D12 = PB_4,
- D13 = PB_3,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PB_3,
- LED2 = PD_8,
- LED3 = PD_9,
- LED4 = PD_10,
- USBTX = PC_6, /* USART6 */
- USBRX = PC_7,
- I2C_SCL = PB_8, /* I2C1 */
- I2C_SDA = PB_9,
- SPI_MOSI = PC_3,
- SPI_MISO = PC_2,
- SPI_SCK = PB_10,
- SPI_CS = PE_3,
- SD_MOSI = PC_3,
- SD_MISO = PC_2,
- SD_SCK = PB_10,
- SD_CS = PE_2,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/TARGET_ARCH_MAX/device.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/TARGET_DISCO_F407VG/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,85 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/TARGET_DISCO_F407VG/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,284 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
-
- // Arduino connector namings
-/*
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-*/
- // Generic signals namings
- LED1 = PD_13,
- LED2 = PD_12,
- LED3 = PD_13,
- LED4 = PD_12,
- LED5 = PD_14,
- LED6 = PD_15,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_2, /* USART2 */
- SERIAL_RX = PA_3,
- USBTX = PA_2, /* USART2 */
- USBRX = PA_3,
- I2C_SCL = PB_8, /* I2C1 */
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/TARGET_DISCO_F407VG/device.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/analogin_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,162 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin) {
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
- HAL_ADC_Init(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj) {
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
- sConfig.Offset = 0;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj) {
- return (adc_read(obj));
-}
-
-float analogin_read(analogin_t *obj) {
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/analogout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,156 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "stm32f4xx_hal.h"
-#include "PeripheralPins.h"
-
-#define RANGE_12BIT (0xFFF)
-
-DAC_HandleTypeDef DacHandle;
-static DAC_ChannelConfTypeDef sConfig;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- uint32_t channel ;
- HAL_StatusTypeDef status;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
-
- if (obj->dac == (DACName)NC) {
- error("DAC pin mapping failed");
- }
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the channel for the write and read functions
- obj->channel = pin;
-
- __GPIOA_CLK_ENABLE();
-
- __DAC_CLK_ENABLE();
-
- DacHandle.Instance = DAC;
-
- status = HAL_DAC_Init(&DacHandle);
- if ( status != HAL_OK ) {
- error("HAL_DAC_Init failed");
- }
-
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
-
- if (obj->channel == PA_4) {
- channel = DAC_CHANNEL_1;
- } else {
- channel = DAC_CHANNEL_2;
- }
-
- if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
- error("HAL_DAC_ConfigChannel failed");
- }
-
- if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
- error("HAL_DAC_Start failed");
- }
-
- if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
- error("HAL_DAC_SetValue failed");
- }
-
-}
-
-void analogout_free(dac_t *obj)
-{
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- if (obj->channel == PA_4) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- } else if (obj->channel == PA_5) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- }
-
- if ( status != HAL_OK ) {
- error("ADC pin mapping failed");
- }
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->channel == PA_4) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- } else if (obj->channel == PA_5) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
- return 0; /* Just silented warning */
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)RANGE_12BIT); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)RANGE_12BIT));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)RANGE_12BIT) {
- value = (uint16_t)RANGE_12BIT; // Max value
- }
-
- dac_write(obj, value);
-}
-
-float analogout_read(dac_t *obj)
-{
-
- uint32_t value = dac_read(obj);
- return (float)value * (1.0f / (float)RANGE_12BIT);
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/gpio_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,72 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin) {
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin) {
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRRL;
- obj->reg_clr = &gpio->BSRRH;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode) {
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/gpio_irq_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,260 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-#define CHANNEL_NUM (7)
-
-static uint32_t channel_ids[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-static uint32_t channel_gpio[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-static uint32_t channel_pin[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(channel_gpio[irq_index]);
- uint32_t pin = (uint32_t)(1 << channel_pin[irq_index]);
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
- }
-
- if (channel_ids[irq_index] == 0) return;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(channel_ids[irq_index], IRQ_FALL);
- } else {
- irq_handler(channel_ids[irq_index], IRQ_RISE);
- }
-}
-
-// The irq_index is passed to the function
-// EXTI line 0
-static void gpio_irq0(void) {
- handle_interrupt_in(0);
-}
-// EXTI line 1
-static void gpio_irq1(void) {
- handle_interrupt_in(1);
-}
-// EXTI line 2
-static void gpio_irq2(void) {
- handle_interrupt_in(2);
-}
-// EXTI line 3
-static void gpio_irq3(void) {
- handle_interrupt_in(3);
-}
-// EXTI line 4
-static void gpio_irq4(void) {
- handle_interrupt_in(4);
-}
-// EXTI lines 5 to 9
-static void gpio_irq5(void) {
- handle_interrupt_in(5);
-}
-// EXTI lines 10 to 15
-static void gpio_irq6(void) {
- handle_interrupt_in(6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) {
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
- channel_ids[irq_index] = id;
- channel_gpio[irq_index] = gpio_add;
- channel_pin[irq_index] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj) {
- channel_ids[obj->irq_index] = 0;
- channel_gpio[obj->irq_index] = 0;
- channel_pin[obj->irq_index] = 0;
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) {
- uint32_t mode = STM_MODE_INPUT;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
-
- pull = GPIO_NOPULL;
-
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
-
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else {
- mode = STM_MODE_INPUT;
- pull = GPIO_NOPULL;
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else if (obj->event == EDGE_RISE) {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- else if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else if (obj->event == IRQ_FALL) {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- else {
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj) {
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj) {
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/gpio_object.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/i2c_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,458 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C clock
- if (obj->i2c == I2C_1) {
- __I2C1_CLK_ENABLE();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_CLK_ENABLE();
- }
- if (obj->i2c == I2C_3) {
- __I2C3_CLK_ENABLE();
- }
-
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-
- // I2C master by default
- obj->slave = 0;
-}
-
-void i2c_frequency(i2c_t *obj, int hz) {
- MBED_ASSERT((hz != 0) && (hz <= 400000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.ClockSpeed = hz;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- HAL_I2C_Init(&I2cHandle);
- if (obj->slave) {
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-
-}
-
-inline int i2c_start(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR1 |= I2C_CR1_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR1 |= I2C_CR1_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- if (length == 0) return 0;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return 0;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return 0;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Read all bytes except last one
- for (count = 0; count < (length - 1); count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // If not repeated start, send stop.
- // Warning: must be done BEFORE the data is read.
- if (stop) {
- i2c_stop(obj);
- }
-
- // Read the last byte
- value = i2c_byte_read(obj, 1);
- data[count] = (char)value;
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- if (length == 0) return 0;
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return 0;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return 0;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return 0;
- }
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- if (last) {
- // Don't acknowledge the last byte
- i2c->CR1 &= ~I2C_CR1_ACK;
- } else {
- // Acknowledge the byte
- i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return (int)i2c->DR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- i2c->DR = (uint8_t)data;
-
- // Wait until the byte is transmitted
- timeout = FLAG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
- (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj) {
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
- if (obj->i2c == I2C_3) {
- __I2C3_FORCE_RESET();
- __I2C3_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave) {
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- if (enable_slave) {
- obj->slave = 1;
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj) {
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length) {
- uint32_t Timeout;
- int size = 0;
- if (length == 0) return 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until RXNE flag is set */
- // Wait until the byte is received
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return 0;
- }
- }
-
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
- }
- }
-
- /* Wait until STOP flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return 0;
- }
- }
-
- /* Clear STOP flag */
- __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return 0;
- }
- }
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length) {
- uint32_t Timeout;
- int size = 0;
- if (length == 0) return 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until TXE flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return 0;
- }
- }
-
-
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
- }
- }
-
- /* Wait until AF flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return 0;
- }
- }
-
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return 0;
- }
- }
-
- I2cHandle.State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(&I2cHandle);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/mbed_overrides.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-#include "stm32f4xx_hal.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/objects.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,110 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/pinmap.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,154 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx) {
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortE:
- gpio_add = GPIOE_BASE;
- __GPIOE_CLK_ENABLE();
- break;
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
- case PortG:
- gpio_add = GPIOG_BASE;
- __GPIOG_CLK_ENABLE();
- break;
- case PortH:
- gpio_add = GPIOH_BASE;
- __GPIOH_CLK_ENABLE();
- break;
- case PortI:
- gpio_add = GPIOI_BASE;
- __GPIOI_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data) {
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode) {
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/port_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,97 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n) {
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir) {
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir) {
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode) {
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value) {
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj) {
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/pwmout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,244 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-static uint8_t ClockDivider;
-/* 0, 1, 2, 3, 4, 5, 6, 7 */
-const uint8_t APBxPrescTable[]={ 0, 0, 0, 0, 1, 2, 3, 4 };
-extern const uint8_t AHBPrescTable[];
-
-void pwmout_init(pwmout_t* obj, PinName pin) {
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- /* APB1 Timers */
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __TIM4_CLK_ENABLE();
- /* APB2 Timers */
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_9) __TIM9_CLK_ENABLE();
- if (obj->pwm == PWM_10) __TIM10_CLK_ENABLE();
- if (obj->pwm == PWM_11) __TIM11_CLK_ENABLE();
- /* Decide APBx divider for timer base clock
- * Auto detect the Clockdivider value according to AHB,APB1 and APB2 prescaler register.
- */
- ClockDivider = AHBPrescTable[ ( ( RCC->CFGR & RCC_CFGR_HPRE ) >> 4 ) ];
- switch( obj->pwm ) {
- /* APB1 low clock */
- case PWM_2:
- case PWM_3:
- case PWM_4:
- ClockDivider += APBxPrescTable[ ( (RCC->CFGR & RCC_CFGR_PPRE1 ) >> 13 ) ];
- break;
- /* APB2 fast clock */
- case PWM_1:
- case PWM_9:
- case PWM_10:
- case PWM_11:
- ClockDivider += APBxPrescTable[ ( (RCC->CFGR & RCC_CFGR_PPRE2 ) >> 10 ) ];
- break;
- default:
- break;
- }
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj) {
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value) {
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
- // Channels 1
- case PA_0:
- case PA_5:
- case PA_6:
- case PA_8:
- case PA_15:
- case PB_4:
- case PB_6:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PA_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_1:
- case PA_9:
- case PB_3:
- case PB_5:
- case PB_7:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 2N
- case PB_0:
- case PB_14:
- channel = TIM_CHANNEL_2;
- complementary_channel = 1;
- break;
- // Channels 3
- case PA_2:
- case PA_10:
- case PB_8:
- case PB_10:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 3N
- case PB_1:
- case PB_15:
- channel = TIM_CHANNEL_3;
- complementary_channel = 1;
- break;
- // Channels 4
- case PA_3:
- case PA_11:
- case PB_9:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj) {
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds) {
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms) {
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us) {
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)( ( SystemCoreClock >> ClockDivider ) / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds) {
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) {
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us) {
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/rtc_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,196 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void) {
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
- rtc_freq = 32000;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void) {
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void) {
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void) {
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t) {
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/serial_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,310 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (3)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj) {
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
- UartHandle.Init.Mode = UART_MODE_TX_RX;
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx) {
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
- if (obj->uart == UART_6) {
- __USART6_CLK_ENABLE();
- obj->index = 2;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-
-}
-
-void serial_free(serial_t *obj) {
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
- if (obj->uart == UART_6) {
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate) {
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) {
- if (data_bits == 8) {
- obj->databits = UART_WORDLENGTH_8B;
- } else {
- obj->databits = UART_WORDLENGTH_9B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id) {
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void) {
- uart_irq(UART_1, 0);
-}
-static void uart2_irq(void) {
- uart_irq(UART_2, 1);
-}
-static void uart6_irq(void) {
- uart_irq(UART_6, 2);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) {
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) {
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_6) {
- irq_n = USART6_IRQn;
- vector = (uint32_t)&uart6_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj) {
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->DR & 0x1FF);
-}
-
-void serial_putc(serial_t *obj, int c) {
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->DR = (uint32_t)(c & 0x1FF);
-}
-
-int serial_readable(serial_t *obj) {
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj) {
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj) {
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx) {
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj) {
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj) {
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/sleep.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,57 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void) {
- TimMasterHandle.Instance = TIM5;
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void) {
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/spi_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,263 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj) {
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
- if (obj->spi == SPI_3) {
- __SPI3_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj) {
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_3) {
- __SPI3_FORCE_RESET();
- __SPI3_RELEASE_RESET();
- __SPI3_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave) {
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz) {
- // Note: The frequencies are obtained with SPI1 clock = 84 MHz (APB2 clock)
- if (hz < 600000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 330 kHz
- } else if ((hz >= 600000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 656 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.3 MHz
- } else if ((hz >= 2000000) && (hz < 5000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2.6 MHz
- } else if ((hz >= 5000000) && (hz < 10000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 5.25 MHz
- } else if ((hz >= 10000000) && (hz < 21000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 10.5 MHz
- } else if ((hz >= 21000000) && (hz < 42000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 21 MHz
- } else { // >= 42000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 42 MHz
- }
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-static inline int ssp_read(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-static inline int ssp_busy(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value) {
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj) {
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-void spi_slave_write(spi_t *obj, int value) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-int spi_busy(spi_t *obj) {
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F407VG/us_ticker.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,64 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void) {
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read() {
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp) {
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void) {
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void) {
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/PeripheralPins.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/PortNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_MTS_DRAGONFLY_F411RE/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PB_6
-#define STDIO_UART_RX PB_7
-#define STDIO_UART UART_1
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_MTS_DRAGONFLY_F411RE/PeripheralPins.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,205 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
-// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
-// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
-// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_MTS_DRAGONFLY_F411RE/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,184 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PC_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PC_9,
- D3 = PB_15,
- D4 = PA_8,
- D5 = PA_7,
- D6 = PB_13,
- D7 = PC_2,
- D8 = PA_9,
- D9 = PB_1,
- D10 = PC_8,
- D11 = PB_5,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = D3,
- LED2 = D3,
- LED3 = D3,
- LED4 = D3,
- USER_BUTTON = PC_13,
- SERIAL_TX = PB_6,
- SERIAL_RX = PB_7,
- USBTX = SERIAL_TX,
- USBRX = SERIAL_RX,
- RADIO_TX = PC_7,
- RADIO_RX = PC_6,
- I2C_SCL = D15,
- I2C_SDA = D14,
- SPI_MOSI = PC_12,
- SPI_MISO = PC_11,
- SPI_SCK = PC_10,
- SPI_CS1 = PA_4,
- SPI_CS2 = PB_14,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_MTS_MDOT_F411RE/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_MTS_MDOT_F411RE/PeripheralPins.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,205 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
-// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
-// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
-// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_MTS_MDOT_F411RE/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,184 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Generic signals namings
- DOUT = PA_2,
- DIN = PA_3,
- AD0 = PB_1,
- AD1 = PB_0,
- AD2 = PA_5,
- AD3 = PA_4,
- AD4 = PA_7,
- AD5 = PC_1,
- AD6 = PA_1,
- DIO0 = PB_1,
- DIO1 = PB_0,
- DIO2 = PA_5,
- DIO3 = PA_4,
- DIO4 = PA_7,
- DIO5 = PC_1,
- DIO6 = PA_1,
- DO8 = PA_6,
- DI8 = PA_11,
- PWM0 = PA_8,
- PWM1 = PC_9,
- NCTS = PA_0,
- RTS = PA_1,
- NDTR = PA_11,
- RSSI = PA_8,
- SLEEPRQ = PA_11,
- ON_SLEEP = PA_12,
- ASSOCIATE = PC_1,
-
- LED1 = PA_2,
- LED2 = PA_2,
- LED3 = PA_2,
- LED4 = PA_2,
- SERIAL_TX = PA_9,
- SERIAL_RX = PA_10,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PA_8,
- I2C_SDA = PC_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PA_4,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_NUCLEO_F411RE/PeripheralNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_NUCLEO_F411RE/PeripheralPins.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,205 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
-// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
-// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
-// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/TARGET_NUCLEO_F411RE/PinNames.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,182 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/analogin_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,169 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
- HAL_ADC_Init(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
- sConfig.Offset = 0;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/device.h Tue Jan 06 16:15:36 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/gpio_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRRL;
- obj->reg_clr = &gpio->BSRRH;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/gpio_irq_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,332 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
-#define CHANNEL_NUM (7)
-
-// Max pins for one line (max with EXTI10_15)
-#define MAX_PIN_LINE (6)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0
- 0, // pin 0
- // EXTI1
- 0, // pin 1
- // EXTI2
- 0, // pin 2
- // EXTI3
- 0, // pin 3
- // EXTI4
- 0, // pin 4
- // EXTI5_9
- 0, // pin 5
- 1, // pin 6
- 2, // pin 7
- 3, // pin 8
- 4, // pin 9
- // EXTI10_15
- 0, // pin 10
- 1, // pin 11
- 2, // pin 12
- 3, // pin 13
- 4, // pin 14
- 5 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 1);
-}
-
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 1);
-}
-
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 1);
-}
-
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3, 1);
-}
-
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4, 1);
-}
-
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5, 5);
-}
-
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6, 6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/gpio_object.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,71 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/i2c_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,495 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-int i2c3_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C3 clock and pinout if not done
- if ((obj->i2c == I2C_3) && !i2c3_inited) {
- i2c3_inited = 1;
- __I2C3_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-
- // I2C master by default
- obj->slave = 0;
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz != 0) && (hz <= 400000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.ClockSpeed = hz;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- HAL_I2C_Init(&I2cHandle);
- if (obj->slave) {
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR1 |= I2C_CR1_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR1 |= I2C_CR1_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Read all bytes except last one
- for (count = 0; count < (length - 1); count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // If not repeated start, send stop.
- // Warning: must be done BEFORE the data is read.
- if (stop) {
- i2c_stop(obj);
- }
-
- // Read the last byte
- value = i2c_byte_read(obj, 1);
- data[count] = (char)value;
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return -1;
- }
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- if (last) {
- // Don't acknowledge the last byte
- i2c->CR1 &= ~I2C_CR1_ACK;
- } else {
- // Acknowledge the byte
- i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->DR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- i2c->DR = (uint8_t)data;
-
- // Wait until the byte is transmitted
- timeout = FLAG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
- (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
- if (obj->i2c == I2C_3) {
- __I2C3_FORCE_RESET();
- __I2C3_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- if (enable_slave) {
- obj->slave = 1;
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until RXNE flag is set */
- // Wait until the byte is received
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
- }
- }
-
- /* Wait until STOP flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Clear STOP flag */
- __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until TXE flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
- }
- }
-
- /* Wait until AF flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- I2cHandle.State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(&I2cHandle);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/mbed_overrides.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/objects.h Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,105 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/pinmap.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,141 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- case PortH:
- gpio_add = GPIOH_BASE;
- __GPIOH_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/port_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/pwmout_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,235 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __TIM4_CLK_ENABLE();
- if (obj->pwm == PWM_9) __TIM9_CLK_ENABLE();
- if (obj->pwm == PWM_10) __TIM10_CLK_ENABLE();
- if (obj->pwm == PWM_11) __TIM11_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
-
- // Channels 1
- case PA_0:
- case PA_5:
- case PA_6:
- case PA_8:
- case PA_15:
- case PB_4:
- case PB_6:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
-
- // Channels 1N
- case PA_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
-
- // Channels 2
- case PA_1:
- case PA_9:
- case PB_3:
- case PB_5:
- case PB_7:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
-
- // Channels 2N
- case PB_0:
- case PB_14:
- channel = TIM_CHANNEL_2;
- complementary_channel = 1;
- break;
-
- // Channels 3
- case PA_2:
- case PA_10:
- case PB_8:
- case PB_10:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
-
- // Channels 3N
- case PB_1:
- case PB_15:
- channel = TIM_CHANNEL_3;
- complementary_channel = 1;
- break;
-
- // Channels 4
- case PA_3:
- case PA_11:
- case PB_9:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
-
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/rtc_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,203 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/serial_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,337 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (3)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
- if (obj->uart == UART_6) {
- __USART6_CLK_ENABLE();
- obj->index = 2;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
- if (obj->uart == UART_6) {
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart6_irq(void)
-{
- uart_irq(UART_6, 2);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_6) {
- irq_n = USART6_IRQn;
- vector = (uint32_t)&uart6_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->DR & 0x1FF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->DR = (uint32_t)(c & 0x1FF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/sleep.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM5;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/spi_api.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,324 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_3) {
- __SPI3_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_4) {
- __SPI4_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_5) {
- __SPI5_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_3) {
- __SPI3_FORCE_RESET();
- __SPI3_RELEASE_RESET();
- __SPI3_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_4) {
- __SPI4_FORCE_RESET();
- __SPI4_RELEASE_RESET();
- __SPI4_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_5) {
- __SPI5_FORCE_RESET();
- __SPI5_RELEASE_RESET();
- __SPI5_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Values depend of PCLK2: 100 MHz
- if ((obj->spi == SPI_1) || (obj->spi == SPI_4) || (obj->spi == SPI_5)) {
- if (hz < 700000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 391 kHz
- } else if ((hz >= 700000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 781 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.56 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 3.13 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 6.25 MHz
- } else if ((hz >= 12000000) && (hz < 25000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 12.5 MHz
- } else if ((hz >= 25000000) && (hz < 50000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 25 MHz
- } else { // >= 50000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 50 MHz
- }
- }
-
- // Values depend of PCLK1: 50 MHz
- if ((obj->spi == SPI_2) || (obj->spi == SPI_3)) {
- if (hz < 400000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 195 kHz
- } else if ((hz >= 400000) && (hz < 700000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 391 kHz
- } else if ((hz >= 700000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 781 MHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.56 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3.13 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6.25 MHz
- } else if ((hz >= 12000000) && (hz < 25000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12.5 MHz
- } else { // >= 25000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 25 MHz
- }
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F411RE/us_ticker.c Tue Jan 06 16:15:36 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}