long dao
Mbed for VNG board
Fork of
mbed-src
by 
mbed official
Revision 435:ea1e2ccb7019, committed 2014-12-11
- Comitter:
- mbed_official
- Date:
- Thu Dec 11 08:30:07 2014 +0000
- Parent:
- 434:53c4d348572c
- Child:
- 436:cef2a8a56f9e
- Commit message:
- Synchronized with git revision b75dadac6cc6030b2b49e3fbe416185b78274c66
Full URL: https://github.com/mbedmicro/mbed/commit/b75dadac6cc6030b2b49e3fbe416185b78274c66/
Y5Design LPC11U35 and NRF51822 - Add New targets
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_LPC11U35_Y5_MBUG/LPC11U35.ld Thu Dec 11 08:30:07 2014 +0000
@@ -0,0 +1,151 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 64K
+ RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40
+ USB_RAM (rwx): ORIGIN = 0x20004000, LENGTH = 0x800
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text.Reset_Handler)
+
+ /* Only vectors and code running at reset are safe to be in first 512
+ bytes since RAM can be mapped into this area for RAM based interrupt
+ vectors. */
+ . = 0x00000200;
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE (__fini_array_end = .);
+
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ __bss_end__ = .;
+ } > RAM
+
+ .heap :
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy :
+ {
+ *(.stack)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_Y5_MBUG/PinNames.h Thu Dec 11 08:30:07 2014 +0000
@@ -0,0 +1,150 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 3
+
+typedef enum {
+ p0 = 0,
+ p1 = 1,
+ p2 = 2,
+ p3 = 3,
+ p4 = 4,
+ p5 = 5,
+ p6 = 6,
+ p7 = 7,
+ p8 = 8,
+ p9 = 9,
+ p10 = 10,
+ p11 = 11,
+ p12 = 12,
+ p13 = 13,
+ p14 = 14,
+ p15 = 15,
+ p16 = 16,
+ p17 = 17,
+ p18 = 18,
+ p19 = 19,
+ p20 = 20,
+ p21 = 21,
+ p22 = 22,
+ p23 = 23,
+ p24 = 24,
+ p25 = 25,
+ p26 = 26,
+ p27 = 27,
+ p28 = 28,
+ p29 = 29,
+ p30 = 30,
+ p31 = 31,
+ p32 = 32,
+ p33 = 33,
+ p34 = 34,
+ p35 = 35,
+// p31=31,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+
+
+ P0_0 = p0,
+ P0_1 = p1,
+ P0_2 = p2,
+ P0_3 = p3,
+ P0_4 = p4,
+ P0_5 = p5,
+ P0_6 = p6,
+ P0_7 = p7,
+
+ P0_8 = p8,
+ P0_9 = p9,
+ P0_10 = p10,
+ P0_11 = p11,
+ P0_12 = p12,
+ P0_13 = p13,
+ P0_14 = p14,
+ P0_15 = p15,
+
+ P0_16 = p16,
+ P0_17 = p17,
+ P0_18 = p18,
+ P0_19 = p19,
+ P0_20 = p20,
+ P0_21 = p21,
+ P0_22 = p22,
+ P0_23 = p23,
+
+ P0_24 = p24,
+ P0_25 = p25,
+ P0_26 = p26,
+ P0_27 = p27,
+ P0_28 = p28,
+ P0_29 = p29,
+ P0_30 = p30,
+
+ LED = p30,
+ LED1 = p30,
+ LED2 = p0,
+ LED3 = p8,
+ LED4 = NC,
+
+ BUTTON1 = p29,
+ BUTTON2 = p17,
+
+
+ RX_PIN_NUMBER = p2,
+ TX_PIN_NUMBER = p3,
+ CTS_PIN_NUMBER = p11,
+ RTS_PIN_NUMBER = p21,
+
+ // mBed interface Pins
+ USBTX = TX_PIN_NUMBER,
+ USBRX = RX_PIN_NUMBER,
+
+ SPIS_PSELMOSI = p12,
+ SPIS_PSELMISO = p6,
+ SPIS_PSELSCK = p9,
+
+ I2C_SDA0 = p17,
+ I2C_SCL0 = p18,
+
+
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 1,
+ PullUp = 3,
+ PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_NRF51822_Y5_MBUG/device.h Thu Dec 11 08:30:07 2014 +0000 @@ -0,0 +1,57 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 0 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_Y5_MBUG/PinNames.h Thu Dec 11 08:30:07 2014 +0000
@@ -0,0 +1,140 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2014 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC11U Pin Names
+ P0_0 = 0,
+ P0_1 = 1,
+ P0_2 = 2,
+ P0_3 = 3,
+ P0_4 = 4,
+ P0_5 = 5,
+ P0_6 = 6,
+ P0_7 = 7,
+ P0_8 = 8,
+ P0_9 = 9,
+ P0_10 = 10,
+ P0_11 = 11,
+ P0_12 = 12,
+ P0_13 = 13,
+ P0_14 = 14,
+ P0_15 = 15,
+ P0_16 = 16,
+ P0_17 = 17,
+ P0_18 = 18,
+ P0_19 = 19,
+ P0_20 = 20,
+ P0_21 = 21,
+ P0_22 = 22,
+ P0_23 = 23,
+ P0_24 = 24,
+ P0_25 = 25,
+ P0_26 = 26,
+ P0_27 = 27,
+
+ P1_0 = 32,
+ P1_1 = 33,
+ P1_2 = 34,
+ P1_3 = 35,
+ P1_4 = 36,
+ P1_5 = 37,
+ P1_6 = 38,
+ P1_7 = 39,
+ P1_8 = 40,
+ P1_9 = 41,
+ P1_10 = 42,
+ P1_11 = 43,
+ P1_12 = 44,
+ P1_13 = 45,
+ P1_14 = 46,
+ P1_15 = 47,
+ P1_16 = 48,
+ P1_17 = 49,
+ P1_18 = 50,
+ P1_19 = 51,
+ P1_20 = 52,
+ P1_21 = 53,
+ P1_22 = 54,
+ P1_23 = 55,
+ P1_24 = 56,
+ P1_25 = 57,
+ P1_26 = 58,
+ P1_27 = 59,
+ P1_28 = 60,
+ P1_29 = 61,
+
+ P1_31 = 63,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+
+ // Other mbed Pin Names
+ LED1 = P0_20, //Approved
+ LED2 = P0_9, //Approved
+ LED3 = P0_11, //Approved
+ LED4 = NC,
+
+ UART_TX = P0_19,
+ UART_RX = P0_18,
+
+
+
+ // Standard but not supported pins
+ USBTX = NC,
+ USBRX = NC
+
+} PinName;
+
+typedef enum {
+ CHANNEL0 = FLEX_INT0_IRQn,
+ CHANNEL1 = FLEX_INT1_IRQn,
+ CHANNEL2 = FLEX_INT2_IRQn,
+ CHANNEL3 = FLEX_INT3_IRQn,
+ CHANNEL4 = FLEX_INT4_IRQn,
+ CHANNEL5 = FLEX_INT5_IRQn,
+ CHANNEL6 = FLEX_INT6_IRQn,
+ CHANNEL7 = FLEX_INT7_IRQn
+} Channel;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ Repeater = 3,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_Y5_MBUG/device.h Thu Dec 11 08:30:07 2014 +0000 @@ -0,0 +1,59 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 32 +#define DEVICE_MAC_OFFSET 20 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif