Mbed for VNG board
Fork of mbed-src by
Revision 419:d1a75cbecf6e, committed 2014-11-27
- Comitter:
- mbed_official
- Date:
- Thu Nov 27 07:45:07 2014 +0000
- Parent:
- 418:f79a1bf6b233
- Child:
- 420:8e6e2662709e
- Commit message:
- Synchronized with git revision 1401e677dd85f4e738d2f1a5c6bdfa1cf66320cf
Full URL: https://github.com/mbedmicro/mbed/commit/1401e677dd85f4e738d2f1a5c6bdfa1cf66320cf/
Targets: STM32F0, F3, F4, L053, L152 - GCC ARM linker script reorganisation
Changed in this revision
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/NUCLEO_F030R8.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,155 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k - RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 8k - 0x0C0 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * _estack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - _sidata = .; - - .data : AT (__etext) - { - __data_start__ = .; - _sdata = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - _edata = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - _sbss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - _ebss = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - _estack = __StackTop; - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/STM32F030X8.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k + RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 8k - 0x0C0 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/NUCLEO_F072RB.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,155 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128k - RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 16k - 0x0C0 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * _estack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - _sidata = .; - - .data : AT (__etext) - { - __data_start__ = .; - _sdata = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - _edata = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - _sbss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - _ebss = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - _estack = __StackTop; - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/STM32F072XB.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128k + RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 16k - 0x0C0 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_GCC_ARM/STM32F303.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,157 +0,0 @@ -/* Linker script for STM32F */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K - CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 8K - RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 40k - 0x188 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - /* KEEP(.ioview) */ - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - _sidata = .; - - .data : AT (__etext) - { - __data_start__ = .; - _sdata = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - _edata = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - _sbss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - _ebss = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - _estack = __StackTop; - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/TOOLCHAIN_GCC_ARM/STM32F303XC.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,155 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K + CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 8K + RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 40k - 0x188 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} +
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/TOOLCHAIN_GCC_ARM/NUCLEO_F334R8.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,151 +0,0 @@ -/* Linker script for STM32F407 */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 0x10000 - RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 0x3000 - 0x0188 -/* CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 0x1000 */ -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/TOOLCHAIN_GCC_ARM/STM32F334X8.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,155 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K + CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 4K + RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 12K - 0x0188 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/STM32F302X8.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,155 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K + RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 16K - 0x188 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} +
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/STM32F302X8_FLASH.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** -** File : STM32F302X8_FLASH.ld -** -** Abstract : Linker script for STM32F302x8 device with -** 64-KByte FLASH, 16-KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Environment : Atollic TrueSTUDIO(R) -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Atollic AB. -** You may use this file as-is or modify it according to the needs of your -** project. This file may only be built (assembled or compiled and linked) -** using the Atollic TrueSTUDIO(R) product. The use of this file together -** with other tools than Atollic TrueSTUDIO(R) is not permitted. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20003FFF; /* end of RAM */ - -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K -RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 16K - 0x188 -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - PROVIDE ( __end__ = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(4); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/NUCLEO_F334R8.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,151 +0,0 @@ -/* Linker script for STM32F407 */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 0x10000 - RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 0x3000 - 0x0188 -/* CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 0x1000 */ -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/STM32F334x8.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,154 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K + CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 4K + RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 12K - 0x0188 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/TOOLCHAIN_GCC_ARM/STM32F429ZI.ld Wed Nov 26 13:15:07 2014 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/TOOLCHAIN_GCC_ARM/STM32F429ZI.ld Thu Nov 27 07:45:07 2014 +0000 @@ -1,5 +1,3 @@ -/* Linker script for STM32F429ZI */ - /* Linker script to configure memory regions. */ MEMORY { @@ -33,6 +31,7 @@ * __StackLimit * __StackTop * __stack + * _estack */ ENTRY(Reset_Handler) @@ -42,7 +41,6 @@ { KEEP(*(.isr_vector)) *(.text*) - /* KEEP(.ioview) */ KEEP(*(.init)) KEEP(*(.fini)) @@ -65,7 +63,7 @@ KEEP(*(.eh_frame*)) } > FLASH - .ARM.extab : + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > FLASH @@ -78,12 +76,12 @@ __exidx_end = .; __etext = .; - _sidata = .; - + _sidata = .; + .data : AT (__etext) { __data_start__ = .; - _sdata = .; + _sdata = .; *(vtable) *(.data*) @@ -112,7 +110,7 @@ . = ALIGN(4); /* All data end */ __data_end__ = .; - _edata = .; + _edata = .; } > RAM @@ -120,14 +118,14 @@ { . = ALIGN(4); __bss_start__ = .; - _sbss = .; + _sbss = .; *(.bss*) *(COMMON) . = ALIGN(4); __bss_end__ = .; - _ebss = .; + _ebss = .; } > RAM - + .heap (COPY): { __end__ = .; @@ -147,11 +145,10 @@ /* Set stack top to end of RAM, and stack limit move down by * size of stack_dummy section */ __StackTop = ORIGIN(RAM) + LENGTH(RAM); - _estack = __StackTop; + _estack = __StackTop; __StackLimit = __StackTop - SIZEOF(.stack_dummy); PROVIDE(__stack = __StackTop); - + /* Check if data + heap + stack exceeds RAM limit */ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") } -
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.s Wed Nov 26 13:15:07 2014 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.s Thu Nov 27 07:45:07 2014 +0000 @@ -1,13 +1,10 @@ /** ****************************************************************************** * @file startup_stm32f429xx.s - * based on startup_stm32f407xx.s with additional interrupt vectors - * - * file startup_stm32f407xx.s * @author MCD Application Team - * @version V2.0.0 - * @date 18-February-2014 - * @brief STM32F407xx Devices vector table for Atollic TrueSTUDIO toolchain. + * @version V2.1.0 + * @date 19-June-2014 + * @brief STM32F429xx Devices vector table for Atollic TrueSTUDIO toolchain. * This module performs: * - Set the initial SP * - Set the initial PC == Reset_Handler, @@ -75,48 +72,13 @@ * @param None * @retval : None */ - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0xc00 -#endif - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0x400 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .if Heap_Size - .space Heap_Size - .endif - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - - - .section .text.Reset_Handler .weak Reset_Handler .type Reset_Handler, %function -Reset_Handler: - ldr sp, =_estack /* set stack pointer */ - +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + /* Copy the data segment initializers from flash to SRAM */ movs r1, #0 b LoopCopyDataInit @@ -148,10 +110,10 @@ /* Call the clock system intitialization function.*/ bl SystemInit /* Call static constructors */ -/* bl __libc_init_array */ + bl __libc_init_array /* Call the application's entry point.*/ - bl _start -/* bx lr */ /* no return */ + bl main + bx lr .size Reset_Handler, .-Reset_Handler /** @@ -176,11 +138,11 @@ .section .isr_vector,"a",%progbits .type g_pfnVectors, %object .size g_pfnVectors, .-g_pfnVectors - - + g_pfnVectors: .word _estack .word Reset_Handler + .word NMI_Handler .word HardFault_Handler .word MemManage_Handler @@ -245,7 +207,7 @@ .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ - .word FSMC_IRQHandler /* FSMC */ + .word FMC_IRQHandler /* FMC */ .word SDIO_IRQHandler /* SDIO */ .word TIM5_IRQHandler /* TIM5 */ .word SPI3_IRQHandler /* SPI3 */ @@ -276,20 +238,19 @@ .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ .word OTG_HS_IRQHandler /* USB OTG HS */ .word DCMI_IRQHandler /* DCMI */ - .word CRYP_IRQHandler /* CRYP crypto */ + .word 0 /* Reserved */ .word HASH_RNG_IRQHandler /* Hash and Rng */ .word FPU_IRQHandler /* FPU */ - .word UART7_IRQHandler /* UART7 */ - .word UART8_IRQHandler /* UART8 */ - .word SPI4_IRQHandler /* SPI4 */ - .word SPI5_IRQHandler /* SPI5 */ - .word SPI6_IRQHandler /* SPI6 */ - .word SAI1_IRQHandler /* SAI1 */ - .word LCD_IRQHandler /* LTDC */ - .word LCDErr_IRQHandler /* LTDC Error */ - .word DMA2D_IRQHandler /* DMA2D */ - - + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word LTDC_IRQHandler /* LTDC_IRQHandler */ + .word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */ + .word DMA2D_IRQHandler /* DMA2D */ + /******************************************************************************* * * Provide weak aliases for each Exception handler to the Default_Handler. @@ -401,7 +362,7 @@ .weak TIM1_UP_TIM10_IRQHandler .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler - + .weak TIM1_TRG_COM_TIM11_IRQHandler .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler @@ -468,8 +429,8 @@ .weak DMA1_Stream7_IRQHandler .thumb_set DMA1_Stream7_IRQHandler,Default_Handler - .weak FSMC_IRQHandler - .thumb_set FSMC_IRQHandler,Default_Handler + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler .weak SDIO_IRQHandler .thumb_set SDIO_IRQHandler,Default_Handler @@ -506,13 +467,13 @@ .weak DMA2_Stream4_IRQHandler .thumb_set DMA2_Stream4_IRQHandler,Default_Handler - - .weak ETH_IRQHandler + + .weak ETH_IRQHandler .thumb_set ETH_IRQHandler,Default_Handler - - .weak ETH_WKUP_IRQHandler + + .weak ETH_WKUP_IRQHandler .thumb_set ETH_WKUP_IRQHandler,Default_Handler - + .weak CAN2_TX_IRQHandler .thumb_set CAN2_TX_IRQHandler,Default_Handler @@ -558,44 +519,43 @@ .weak OTG_HS_IRQHandler .thumb_set OTG_HS_IRQHandler,Default_Handler - .weak DCMI_IRQHandler + .weak DCMI_IRQHandler .thumb_set DCMI_IRQHandler,Default_Handler - - .weak CRYP_IRQHandler - .thumb_set CRYP_IRQHandler,Default_Handler + + .weak HASH_RNG_IRQHandler + .thumb_set HASH_RNG_IRQHandler,Default_Handler - .weak HASH_RNG_IRQHandler - .thumb_set HASH_RNG_IRQHandler,Default_Handler + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler - .weak FPU_IRQHandler - .thumb_set FPU_IRQHandler,Default_Handler - - .weak UART7_IRQHandler + .weak UART7_IRQHandler .thumb_set UART7_IRQHandler,Default_Handler - .weak UART8_IRQHandler + .weak UART8_IRQHandler .thumb_set UART8_IRQHandler,Default_Handler - .weak SPI4_IRQHandler + .weak SPI4_IRQHandler .thumb_set SPI4_IRQHandler,Default_Handler - .weak SPI5_IRQHandler + .weak SPI5_IRQHandler .thumb_set SPI5_IRQHandler,Default_Handler - .weak SPI6_IRQHandler + .weak SPI6_IRQHandler .thumb_set SPI6_IRQHandler,Default_Handler - .weak SAI1_IRQHandler + .weak SAI1_IRQHandler .thumb_set SAI1_IRQHandler,Default_Handler - .weak LCD_IRQHandler - .thumb_set LCD_IRQHandler,Default_Handler + .weak LTDC_IRQHandler + .thumb_set LTDC_IRQHandler,Default_Handler - .weak LCDErr_IRQHandler - .thumb_set LCDErr_IRQHandler,Default_Handler + .weak LTDC_ER_IRQHandler + .thumb_set LTDC_ER_IRQHandler,Default_Handler - .weak DMA2D_IRQHandler + .weak DMA2D_IRQHandler .thumb_set DMA2D_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + + +
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/NUCLEO_F401RE.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,151 +0,0 @@ -/* Linker script for STM32F407 */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K -/* CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K */ - RAM (rwx) : ORIGIN = 0x20000194, LENGTH = 96k - 0x194 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/STM32F401XE.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K + RAM (rwx) : ORIGIN = 0x20000194, LENGTH = 96k - 0x194 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/startup_STM32F40x.s Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,295 +0,0 @@ -/* File: startup_STM32F40x.S - * Purpose: startup file for Cortex-M4 devices. Should use with - * GCC for ARM Embedded Processors - * Version: V1.4 - * Date: 09 July 2012 - * - * Copyright (c) 2011, 2012, ARM Limited - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - * Neither the name of the ARM Limited nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - .syntax unified - .arch armv7-m - - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0xc00 -#endif - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0x400 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .if Heap_Size - .space Heap_Size - .endif - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - .section .isr_vector - .align 2 - .globl __isr_vector -__isr_vector: - .long __StackTop /* Top of Stack */ - .long Reset_Handler /* Reset Handler */ - .long NMI_Handler /* NMI Handler */ - .long HardFault_Handler /* Hard Fault Handler */ - .long MemManage_Handler /* MPU Fault Handler */ - .long BusFault_Handler /* Bus Fault Handler */ - .long UsageFault_Handler /* Usage Fault Handler */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long SVC_Handler /* SVCall Handler */ - .long DebugMon_Handler /* Debug Monitor Handler */ - .long 0 /* Reserved */ - .long PendSV_Handler /* PendSV Handler */ - .long SysTick_Handler /* SysTick Handler */ - - /* External interrupts */ - .long WWDG_IRQHandler /* Window WatchDog */ - .long PVD_IRQHandler /* PVD through EXTI Line detection */ - .long TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ - .long RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ - .long FLASH_IRQHandler /* FLASH */ - .long RCC_IRQHandler /* RCC */ - .long EXTI0_IRQHandler /* EXTI Line0 */ - .long EXTI1_IRQHandler /* EXTI Line1 */ - .long EXTI2_IRQHandler /* EXTI Line2 */ - .long EXTI3_IRQHandler /* EXTI Line3 */ - .long EXTI4_IRQHandler /* EXTI Line4 */ - .long DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ - .long DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ - .long DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ - .long DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ - .long DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ - .long DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ - .long DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ - .long ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long EXTI9_5_IRQHandler /* External Line[9:5]s */ - .long TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ - .long TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ - .long TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ - .long TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .long TIM2_IRQHandler /* TIM2 */ - .long TIM3_IRQHandler /* TIM3 */ - .long TIM4_IRQHandler /* TIM4 */ - .long I2C1_EV_IRQHandler /* I2C1 Event */ - .long I2C1_ER_IRQHandler /* I2C1 Error */ - .long I2C2_EV_IRQHandler /* I2C2 Event */ - .long I2C2_ER_IRQHandler /* I2C2 Error */ - .long SPI1_IRQHandler /* SPI1 */ - .long SPI2_IRQHandler /* SPI2 */ - .long USART1_IRQHandler /* USART1 */ - .long USART2_IRQHandler /* USART2 */ - .long 0 /* Reserved */ - .long EXTI15_10_IRQHandler /* External Line[15:10]s */ - .long RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ - .long OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ - .long 0 /* Reserved */ - .long SDIO_IRQHandler /* SDIO */ - .long TIM5_IRQHandler /* TIM5 */ - .long SPI3_IRQHandler /* SPI3 */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ - .long DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ - .long DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ - .long DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ - .long DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long OTG_FS_IRQHandler /* USB OTG FS */ - .long DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ - .long DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ - .long DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ - .long USART6_IRQHandler /* USART6 */ - .long I2C3_EV_IRQHandler /* I2C3 event */ - .long I2C3_ER_IRQHandler /* I2C3 error */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long FPU_IRQHandler /* FPU */ - .long SPI4_IRQHandler /* SPI4 */ - - .size __isr_vector, . - __isr_vector - - .text - .thumb - .thumb_func - .align 2 - .globl Reset_Handler - .type Reset_Handler, %function -Reset_Handler: -/* Loop to copy data from read only memory to RAM. The ranges - * of copy from/to are specified by following symbols evaluated in - * linker script. - * __etext: End of code section, i.e., begin of data sections to copy from. - * __data_start__/__data_end__: RAM address range that data should be - * copied to. Both must be aligned to 4 bytes boundary. */ - - ldr r1, =__etext - ldr r2, =__data_start__ - ldr r3, =__data_end__ - -.LC0: - cmp r2, r3 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r2], #4 - blt .LC0 - - ldr r0, =SystemInit - blx r0 - ldr r0, =_start - bx r0 - .pool - .size Reset_Handler, . - Reset_Handler - - .text -/* Macro to define default handlers. Default handler - * will be weak symbol and just dead loops. They can be - * overwritten by other handlers */ - .macro def_default_handler handler_name - .align 1 - .thumb_func - .weak \handler_name - .type \handler_name, %function -\handler_name : - b . - .size \handler_name, . - \handler_name - .endm - - def_default_handler NMI_Handler - def_default_handler HardFault_Handler - def_default_handler MemManage_Handler - def_default_handler BusFault_Handler - def_default_handler UsageFault_Handler - def_default_handler SVC_Handler - def_default_handler DebugMon_Handler - def_default_handler PendSV_Handler - def_default_handler SysTick_Handler - def_default_handler Default_Handler - - .macro def_irq_default_handler handler_name - .weak \handler_name - .set \handler_name, Default_Handler - .endm - - def_irq_default_handler WWDG_IRQHandler - def_irq_default_handler PVD_IRQHandler - def_irq_default_handler TAMP_STAMP_IRQHandler - def_irq_default_handler RTC_WKUP_IRQHandler - def_irq_default_handler FLASH_IRQHandler - def_irq_default_handler RCC_IRQHandler - def_irq_default_handler EXTI0_IRQHandler - def_irq_default_handler EXTI1_IRQHandler - def_irq_default_handler EXTI2_IRQHandler - def_irq_default_handler EXTI3_IRQHandler - def_irq_default_handler EXTI4_IRQHandler - def_irq_default_handler DMA1_Stream0_IRQHandler - def_irq_default_handler DMA1_Stream1_IRQHandler - def_irq_default_handler DMA1_Stream2_IRQHandler - def_irq_default_handler DMA1_Stream3_IRQHandler - def_irq_default_handler DMA1_Stream4_IRQHandler - def_irq_default_handler DMA1_Stream5_IRQHandler - def_irq_default_handler DMA1_Stream6_IRQHandler - def_irq_default_handler ADC_IRQHandler - def_irq_default_handler EXTI9_5_IRQHandler - def_irq_default_handler TIM1_BRK_TIM9_IRQHandler - def_irq_default_handler TIM1_UP_TIM10_IRQHandler - def_irq_default_handler TIM1_TRG_COM_TIM11_IRQHandler - def_irq_default_handler TIM1_CC_IRQHandler - def_irq_default_handler TIM2_IRQHandler - def_irq_default_handler TIM3_IRQHandler - def_irq_default_handler TIM4_IRQHandler - def_irq_default_handler I2C1_EV_IRQHandler - def_irq_default_handler I2C1_ER_IRQHandler - def_irq_default_handler I2C2_EV_IRQHandler - def_irq_default_handler I2C2_ER_IRQHandler - def_irq_default_handler SPI1_IRQHandler - def_irq_default_handler SPI2_IRQHandler - def_irq_default_handler USART1_IRQHandler - def_irq_default_handler USART2_IRQHandler - def_irq_default_handler EXTI15_10_IRQHandler - def_irq_default_handler RTC_Alarm_IRQHandler - def_irq_default_handler OTG_FS_WKUP_IRQHandler - def_irq_default_handler DMA1_Stream7_IRQHandler - def_irq_default_handler SDIO_IRQHandler - def_irq_default_handler TIM5_IRQHandler - def_irq_default_handler SPI3_IRQHandler - def_irq_default_handler DMA2_Stream0_IRQHandler - def_irq_default_handler DMA2_Stream1_IRQHandler - def_irq_default_handler DMA2_Stream2_IRQHandler - def_irq_default_handler DMA2_Stream3_IRQHandler - def_irq_default_handler DMA2_Stream4_IRQHandler - def_irq_default_handler OTG_FS_IRQHandler - def_irq_default_handler DMA2_Stream5_IRQHandler - def_irq_default_handler DMA2_Stream6_IRQHandler - def_irq_default_handler DMA2_Stream7_IRQHandler - def_irq_default_handler USART6_IRQHandler - def_irq_default_handler I2C3_EV_IRQHandler - def_irq_default_handler I2C3_ER_IRQHandler - def_irq_default_handler FPU_IRQHandler - def_irq_default_handler SPI4_IRQHandler - def_irq_default_handler DEF_IRQHandler - - .end
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/startup_stm32f401xe.s Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,450 @@ +/** + ****************************************************************************** + * @file startup_stm32f401xe.s + * @author MCD Application Team + * @version V2.1.0 + * @date 19-June-2014 + * @brief STM32F401xExx Devices vector table for Atollic TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word 0 /* Reserved */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word 0 /* Reserved */ + .word SDIO_IRQHandler /* SDIO */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word FPU_IRQHandler /* FPU */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word SPI4_IRQHandler /* SPI4 */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak SDIO_IRQHandler + .thumb_set SDIO_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/NUCLEO_F411RE.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,151 +0,0 @@ -/* Linker script for STM32F411 */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K -/* CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K */ - RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/STM32F411XE.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K + RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/startup_STM32F41x.s Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,297 +0,0 @@ -/* File: startup_STM32F40x.S - * Purpose: startup file for Cortex-M4 devices. Should use with - * GCC for ARM Embedded Processors - * Version: V1.4 - * Date: 09 July 2012 - * - * Copyright (c) 2011, 2012, ARM Limited - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - * Neither the name of the ARM Limited nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - .syntax unified - .arch armv7-m - - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0xc00 -#endif - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0x400 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .if Heap_Size - .space Heap_Size - .endif - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - .section .isr_vector - .align 2 - .globl __isr_vector -__isr_vector: - .long __StackTop /* Top of Stack */ - .long Reset_Handler /* Reset Handler */ - .long NMI_Handler /* NMI Handler */ - .long HardFault_Handler /* Hard Fault Handler */ - .long MemManage_Handler /* MPU Fault Handler */ - .long BusFault_Handler /* Bus Fault Handler */ - .long UsageFault_Handler /* Usage Fault Handler */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long SVC_Handler /* SVCall Handler */ - .long DebugMon_Handler /* Debug Monitor Handler */ - .long 0 /* Reserved */ - .long PendSV_Handler /* PendSV Handler */ - .long SysTick_Handler /* SysTick Handler */ - - /* External interrupts */ - .long WWDG_IRQHandler /* Window WatchDog */ - .long PVD_IRQHandler /* PVD through EXTI Line detection */ - .long TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ - .long RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ - .long FLASH_IRQHandler /* FLASH */ - .long RCC_IRQHandler /* RCC */ - .long EXTI0_IRQHandler /* EXTI Line0 */ - .long EXTI1_IRQHandler /* EXTI Line1 */ - .long EXTI2_IRQHandler /* EXTI Line2 */ - .long EXTI3_IRQHandler /* EXTI Line3 */ - .long EXTI4_IRQHandler /* EXTI Line4 */ - .long DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ - .long DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ - .long DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ - .long DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ - .long DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ - .long DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ - .long DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ - .long ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long EXTI9_5_IRQHandler /* External Line[9:5]s */ - .long TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ - .long TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ - .long TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ - .long TIM1_CC_IRQHandler /* TIM1 Capture Compare */ - .long TIM2_IRQHandler /* TIM2 */ - .long TIM3_IRQHandler /* TIM3 */ - .long TIM4_IRQHandler /* TIM4 */ - .long I2C1_EV_IRQHandler /* I2C1 Event */ - .long I2C1_ER_IRQHandler /* I2C1 Error */ - .long I2C2_EV_IRQHandler /* I2C2 Event */ - .long I2C2_ER_IRQHandler /* I2C2 Error */ - .long SPI1_IRQHandler /* SPI1 */ - .long SPI2_IRQHandler /* SPI2 */ - .long USART1_IRQHandler /* USART1 */ - .long USART2_IRQHandler /* USART2 */ - .long 0 /* Reserved */ - .long EXTI15_10_IRQHandler /* External Line[15:10]s */ - .long RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ - .long OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ - .long 0 /* Reserved */ - .long SDIO_IRQHandler /* SDIO */ - .long TIM5_IRQHandler /* TIM5 */ - .long SPI3_IRQHandler /* SPI3 */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ - .long DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ - .long DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ - .long DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ - .long DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long OTG_FS_IRQHandler /* USB OTG FS */ - .long DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ - .long DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ - .long DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ - .long USART6_IRQHandler /* USART6 */ - .long I2C3_EV_IRQHandler /* I2C3 event */ - .long I2C3_ER_IRQHandler /* I2C3 error */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long 0 /* Reserved */ - .long FPU_IRQHandler /* FPU */ - .long SPI4_IRQHandler /* SPI4 */ - .long SPI5_IRQHandler /* SPI5 */ - - .size __isr_vector, . - __isr_vector - - .text - .thumb - .thumb_func - .align 2 - .globl Reset_Handler - .type Reset_Handler, %function -Reset_Handler: -/* Loop to copy data from read only memory to RAM. The ranges - * of copy from/to are specified by following symbols evaluated in - * linker script. - * __etext: End of code section, i.e., begin of data sections to copy from. - * __data_start__/__data_end__: RAM address range that data should be - * copied to. Both must be aligned to 4 bytes boundary. */ - - ldr r1, =__etext - ldr r2, =__data_start__ - ldr r3, =__data_end__ - -.LC0: - cmp r2, r3 - ittt lt - ldrlt r0, [r1], #4 - strlt r0, [r2], #4 - blt .LC0 - - ldr r0, =SystemInit - blx r0 - ldr r0, =_start - bx r0 - .pool - .size Reset_Handler, . - Reset_Handler - - .text -/* Macro to define default handlers. Default handler - * will be weak symbol and just dead loops. They can be - * overwritten by other handlers */ - .macro def_default_handler handler_name - .align 1 - .thumb_func - .weak \handler_name - .type \handler_name, %function -\handler_name : - b . - .size \handler_name, . - \handler_name - .endm - - def_default_handler NMI_Handler - def_default_handler HardFault_Handler - def_default_handler MemManage_Handler - def_default_handler BusFault_Handler - def_default_handler UsageFault_Handler - def_default_handler SVC_Handler - def_default_handler DebugMon_Handler - def_default_handler PendSV_Handler - def_default_handler SysTick_Handler - def_default_handler Default_Handler - - .macro def_irq_default_handler handler_name - .weak \handler_name - .set \handler_name, Default_Handler - .endm - - def_irq_default_handler WWDG_IRQHandler - def_irq_default_handler PVD_IRQHandler - def_irq_default_handler TAMP_STAMP_IRQHandler - def_irq_default_handler RTC_WKUP_IRQHandler - def_irq_default_handler FLASH_IRQHandler - def_irq_default_handler RCC_IRQHandler - def_irq_default_handler EXTI0_IRQHandler - def_irq_default_handler EXTI1_IRQHandler - def_irq_default_handler EXTI2_IRQHandler - def_irq_default_handler EXTI3_IRQHandler - def_irq_default_handler EXTI4_IRQHandler - def_irq_default_handler DMA1_Stream0_IRQHandler - def_irq_default_handler DMA1_Stream1_IRQHandler - def_irq_default_handler DMA1_Stream2_IRQHandler - def_irq_default_handler DMA1_Stream3_IRQHandler - def_irq_default_handler DMA1_Stream4_IRQHandler - def_irq_default_handler DMA1_Stream5_IRQHandler - def_irq_default_handler DMA1_Stream6_IRQHandler - def_irq_default_handler ADC_IRQHandler - def_irq_default_handler EXTI9_5_IRQHandler - def_irq_default_handler TIM1_BRK_TIM9_IRQHandler - def_irq_default_handler TIM1_UP_TIM10_IRQHandler - def_irq_default_handler TIM1_TRG_COM_TIM11_IRQHandler - def_irq_default_handler TIM1_CC_IRQHandler - def_irq_default_handler TIM2_IRQHandler - def_irq_default_handler TIM3_IRQHandler - def_irq_default_handler TIM4_IRQHandler - def_irq_default_handler I2C1_EV_IRQHandler - def_irq_default_handler I2C1_ER_IRQHandler - def_irq_default_handler I2C2_EV_IRQHandler - def_irq_default_handler I2C2_ER_IRQHandler - def_irq_default_handler SPI1_IRQHandler - def_irq_default_handler SPI2_IRQHandler - def_irq_default_handler USART1_IRQHandler - def_irq_default_handler USART2_IRQHandler - def_irq_default_handler EXTI15_10_IRQHandler - def_irq_default_handler RTC_Alarm_IRQHandler - def_irq_default_handler OTG_FS_WKUP_IRQHandler - def_irq_default_handler DMA1_Stream7_IRQHandler - def_irq_default_handler SDIO_IRQHandler - def_irq_default_handler TIM5_IRQHandler - def_irq_default_handler SPI3_IRQHandler - def_irq_default_handler DMA2_Stream0_IRQHandler - def_irq_default_handler DMA2_Stream1_IRQHandler - def_irq_default_handler DMA2_Stream2_IRQHandler - def_irq_default_handler DMA2_Stream3_IRQHandler - def_irq_default_handler DMA2_Stream4_IRQHandler - def_irq_default_handler OTG_FS_IRQHandler - def_irq_default_handler DMA2_Stream5_IRQHandler - def_irq_default_handler DMA2_Stream6_IRQHandler - def_irq_default_handler DMA2_Stream7_IRQHandler - def_irq_default_handler USART6_IRQHandler - def_irq_default_handler I2C3_EV_IRQHandler - def_irq_default_handler I2C3_ER_IRQHandler - def_irq_default_handler FPU_IRQHandler - def_irq_default_handler SPI4_IRQHandler - def_irq_default_handler SPI5_IRQHandler - def_irq_default_handler DEF_IRQHandler - - .end
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/startup_stm32f411xe.s Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,454 @@ +/** + ****************************************************************************** + * @file startup_stm32f411xe.s + * @author MCD Application Team + * @version V2.1.0 + * @date 19-June-2014 + * @brief STM32F411xExx Devices vector table for Atollic TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word 0 /* Reserved */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word 0 /* Reserved */ + .word SDIO_IRQHandler /* SDIO */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word FPU_IRQHandler /* FPU */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak SDIO_IRQHandler + .thumb_set SDIO_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/TOOLCHAIN_GCC_ARM/STM32F407.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,157 +0,0 @@ -/* Linker script for STM32F407 */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K - CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K - RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 128k - 0x188 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - /* KEEP(.ioview) */ - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - _sidata = .; - - .data : AT (__etext) - { - __data_start__ = .; - _sdata = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - _edata = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - _sbss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - _ebss = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - _estack = __StackTop; - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/TOOLCHAIN_GCC_ARM/STM32F407XG.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,154 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K + CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K + RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 128k - 0x188 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/TOOLCHAIN_GCC_ARM/startup_stm32f407xx.s Wed Nov 26 13:15:07 2014 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_STM32F407VG/TOOLCHAIN_GCC_ARM/startup_stm32f407xx.s Thu Nov 27 07:45:07 2014 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file startup_stm32f407xx.s * @author MCD Application Team - * @version V2.0.0 - * @date 18-February-2014 + * @version V2.1.0 + * @date 19-June-2014 * @brief STM32F407xx Devices vector table for Atollic TrueSTUDIO toolchain. * This module performs: * - Set the initial SP @@ -72,41 +72,6 @@ * @param None * @retval : None */ - .section .stack - .align 3 -#ifdef __STACK_SIZE - .equ Stack_Size, __STACK_SIZE -#else - .equ Stack_Size, 0xc00 -#endif - .globl __StackTop - .globl __StackLimit -__StackLimit: - .space Stack_Size - .size __StackLimit, . - __StackLimit -__StackTop: - .size __StackTop, . - __StackTop - - .section .heap - .align 3 -#ifdef __HEAP_SIZE - .equ Heap_Size, __HEAP_SIZE -#else - .equ Heap_Size, 0x400 -#endif - .globl __HeapBase - .globl __HeapLimit -__HeapBase: - .if Heap_Size - .space Heap_Size - .endif - .size __HeapBase, . - __HeapBase -__HeapLimit: - .size __HeapLimit, . - __HeapLimit - - - - .section .text.Reset_Handler .weak Reset_Handler @@ -145,10 +110,10 @@ /* Call the clock system intitialization function.*/ bl SystemInit /* Call static constructors */ -/* bl __libc_init_array */ + bl __libc_init_array /* Call the application's entry point.*/ - bl _start -/* bx lr */ /* no return */ + bl main + bx lr .size Reset_Handler, .-Reset_Handler /**
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L053C8/TOOLCHAIN_GCC_ARM/STM32L053X8.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k + RAM (rwx) : ORIGIN = 0x200000C0, LENGTH = 8K-0xC0 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L053C8/TOOLCHAIN_GCC_ARM/STM32L0xx.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,155 +0,0 @@ -/* Linker script for STM32L0 */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k - RAM (rwx) : ORIGIN = 0x200000C0, LENGTH = 0x2000-0xC0 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - _sidata = .; - - .data : AT (__etext) - { - __data_start__ = .; - _sdata = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - _edata = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - _sbss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - _ebss = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - _estack = __StackTop; - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/STM32L053X8.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k + RAM (rwx) : ORIGIN = 0x200000C0, LENGTH = 0x2000-0xC0 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/STM32L0xx.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,155 +0,0 @@ -/* Linker script for STM32L0 */ - -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k - RAM (rwx) : ORIGIN = 0x200000C0, LENGTH = 0x2000-0xC0 -} - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.isr_vector)) - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - __etext = .; - _sidata = .; - - .data : AT (__etext) - { - __data_start__ = .; - _sdata = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - _edata = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - _sbss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - _ebss = .; - } > RAM - - .heap (COPY): - { - __end__ = .; - end = __end__; - *(.heap*) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - _estack = __StackTop; - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/STM32L152XE.ld Thu Nov 27 07:45:07 2014 +0000 @@ -0,0 +1,153 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k + RAM (rwx) : ORIGIN = 0x200000C0, LENGTH = 0x2000-0xC0 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/STM32L152XE_FLASH.ld Wed Nov 26 13:15:07 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** -** File : STM32L152XE_FLASH.ld -** -** Abstract : Linker script for STM32L152XE Device with -** 512KByte FLASH, 80KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Environment : Atollic TrueSTUDIO(R) -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Atollic AB. -** You may use this file as-is or modify it according to the needs of your -** project. This file may only be built (assembled or compiled and linked) -** using the Atollic TrueSTUDIO(R) product. The use of this file together -** with other tools than Atollic TrueSTUDIO(R) is not permitted. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20013FFF; /* end of RAM */ - -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K -RAM (xrw) : ORIGIN = 0x2000013C, LENGTH = 80K - 0x13C -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - PROVIDE ( __end__ = .); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(4); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -}