Eric Tsai / Mbed 2 deprecated BLE_Gateway

BLE ADV Gateway, converts advertisement to proper JSON serial output

Dependencies:   BLE_API mbed mbedtls nRF51822

Files at this revision

API Documentation at this revision

Revision 14:0486f885b1b1, committed 2018-11-05

Comitter:
electronichamsters
Date:
Mon Nov 05 04:44:01 2018 +0000
Parent:
13:e136665cf993
Commit message:
Reverting to mbed revision 126 as workaround to issue 8344, linker error on mbed compiler.

Changed in this revision

main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file 
--- a/main.cpp	Sun Aug 27 05:48:02 2017 +0000
+++ b/main.cpp	Mon Nov 05 04:44:01 2018 +0000
@@ -43,7 +43,7 @@
 mbedtls_aes_context aes;
 unsigned char iv[16] = {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x1, 0x2};       //16-byte aes key
 
-
+//Serial device(p9, p11);  //nRF51822 uart:  TX=p9.  RX=p11
 Serial device(p9, p11);  //nRF51822 uart:  TX=p9.  RX=p11
 DigitalIn pinHandShake(p0);  //handshake uart to prevent output before bridge MCU is ready.  Flow control.
 
@@ -415,7 +415,7 @@
                 // 4.  Xmit Counter 0-255, incremented by Beacon with each new unique ADV event.
                 // "tmr":xxxx,
                 //---------------------------------------                
-                device.printf("\"xmit_cnt\":%d,", Received_Xmit_Cnt);
+                device.printf("\"xcnt\":%d,", Received_Xmit_Cnt);
                 
                 //---------------------------------------
                 // 5.  rest of sensor payload as json
@@ -430,7 +430,7 @@
     
                 device.printf("}");
                 device.printf("\r\n");  //gateway looking for cariage return to indicate end
-                wait_ms(60);  //needed to give gateway time to assert flow control handshake pin
+                wait_ms(140);  //needed to give gateway time to assert flow control handshake pin
                 while (pinHandShake.read() == 1)    //normally pulled down, so loop when gateway processing;
                 {
                     //uart flow control

--- a/mbed.bld	Sun Aug 27 05:48:02 2017 +0000
+++ b/mbed.bld	Mon Nov 05 04:44:01 2018 +0000
@@ -1,1 +1,1 @@
-https://mbed.org/users/mbed_official/code/mbed/builds/e2bfab296f20
\ No newline at end of file
+https://os.mbed.com/users/mbed_official/code/mbed/builds/abea610beb85
\ No newline at end of file