Alexan E

Twitter

Alexan’s activity

Reply to Nanosecond Timers - I think you can get things easier using ARMwizard, take a look http://alexan.edaboard.eu/ Note that …
Alexan E - 30 Jun 2012
Reply to Nanosecond Timers - The register names are LPC_TIM0->CTCR LPC_TIM0->TC LPC_TIM0->PR LPC_TIM0->MCR LPC_TIM0->MR0 LPC_TIM0->MR1 LPC_TIM0->MR2 LPC_TIM0->MR3 LPC_TIM0->CCR LPC_TIM0->EMR LPC_TIM0->TCR …
Alexan E - 30 Jun 2012
Reply to how can i reset mbed by coding - You can use the CMSIS function NVIC_SystemReset() http://knowledgebase.nxp.trimm.net/showthread.php?t=2245 There is always the alternative of setting …
Alexan E - 01 Jun 2012
Reply to PwmIn's precision - Quote: A transition on a capture pin can be configured to load one of the …
Alexan E - 01 Jun 2012
Reply to Programming the lpc11u24 directly (no mbed) - Yes you still need the BIN2HEX , at least if you are using an offline …
Alexan E - 31 May 2012
Reply to PwmIn's precision - I think you should consider using the capture inputs of the timer to get the …
Alexan E - 30 May 2012
Reply to Programming the lpc11u24 directly (no mbed) - You don't need a crystal unless you want to use the usb mode described below …
Alexan E - 30 May 2012

Alexan’s public repositories

  • Mbed 2 deprecated
    blinky

    blinky example from NXP code bundle for LPC11Uxx. No mbed library used

    LPC11U24
    Last updated: 28 May 2012 2 127
  • Mbed 2 deprecated
    FlashingLeds

    Flashing leds using the four timer interrupts , 100ms, 200ms, 400ms, 800ms

    Last updated: 24 May 2012 3 371
  • Mbed 2 deprecated
    GPIO_interrupts

    A simple example that uses the GPIO group and pin interrupts. LED1 turns on when P21 and P22 are grounded (using group 0 interrupt) LED1 turns of when P23 or …

    LPC11U24
    Last updated: 24 May 2012 3 292
  • KEIL_LPC11U_COMMON_LIB

    The common folder libraries from keil LPC11Uxx code bundle

    Last updated: 27 May 2012 1 69
See all repositories