u-blox
This example establishes a transparent link between the mbed seial port and the gps on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. u-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html
Dependencies: mbed
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration
Revision 0:7f124c0a351a, committed 2013-10-22
- Comitter:
- mazgch
- Date:
- Tue Oct 22 21:21:46 2013 +0000
- Child:
- 1:0d32baf4a645
- Commit message:
- Simple transparent serial port to the gps receiver,
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/C027.lib Tue Oct 22 21:21:46 2013 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/ublox/code/C027/#7f910a8e77ee
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Tue Oct 22 21:21:46 2013 +0000
@@ -0,0 +1,23 @@
+#include "mbed.h"
+#include "C027_PinNames.h"
+
+int main()
+{
+ // open the gps serial port
+ Serial gps(GPSTXD, GPSRXD);
+ gps.baud(GPSBAUD);
+
+ // open the PC serial port and (use the same baudrate)
+ Serial pc(USBTX, USBRX);
+ pc.baud(GPSBAUD);
+
+ while (1)
+ {
+ // transfer data from pc to gps
+ if (pc.readable() && gps.writeable())
+ gps.putc(pc.getc());
+ // transfer data from gps to pc
+ if (gps.readable() && pc.writeable())
+ pc.putc(gps.getc());
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Tue Oct 22 21:21:46 2013 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/a9913a65894f \ No newline at end of file