ST / X_NUCLEO_IDW01M1

X-NUCLEO-IDW01M1 Wi-Fi expansion board mbed library

Dependents:   SpwfInterface_NSAPI_Tests HelloWorld_IDW01M1

Fork of X_NUCLEO_IDW01M1 by ST Expansion SW Team

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. Introduction
  2. Firmware Library
  3. Example Applications
  4. NSAPI Test Suite

Introduction

X_NUCLEO_IDW01M1 is a mbed library for the Wi-Fi expansion board X-NUCLEO-IDW01M1 compatible with STM32 Nucleo.

The software can be used for building Wi-Fi applications with the SPWF01SA module. It is an implementation of the NetworkSocketAPI library from mbed.

Firmware Library

The X_NUCLEO_IDW01M1 library comes with a sample application (HelloWorld_IDW01M1v2) and a NSAPI test suite application (SpwfInterface_NSAPI_Testsv2).

This library is only supported on NUCLEO platforms and any arduino platforms. However connection to arduino platforms needs to be done manually using 4 wires for Vdd, Gnd, Rxt and Tx. Example applications have more specific details on exact connections to be used.

The features of the library are :

  • Supports mbed NetworkSocketAPI
  • Supports both client sockets
  • Configuration of USART pins to be used

Class SpwfSAInterface is intended to represent the X-NUCLEO-IDW01M1 expansion board with the SPWF module.

The expansion board is basically featuring the component:

  1. a SPWF01SA Serial-to-Wi-Fi module

Example Applications

NSAPI Test Suite

All wikipages