MultiTech
Example program demonstrating sending and reading SMS messages from the cellular modem using the MTSAS library.
Revision 0:d9fd19c8ca39, committed 2014-07-24
- Comitter:
- Vanger
- Date:
- Thu Jul 24 19:24:37 2014 +0000
- Child:
- 1:1f5c9497a125
- Commit message:
- MTSAS example to demonstrate the use of the mtsas library to send an SMS message to the phone number set, read all received messages from the radio, and delete all sms messages before and after sending the sms message.
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Thu Jul 24 19:24:37 2014 +0000
@@ -0,0 +1,73 @@
+#include "mbed.h"
+#include "mtsas.h"
+
+int main(){
+ //Modify to match your apn if you are using an HSPA radio with a SIM card
+ const char APN[] = "";
+
+ //Input the phone number below that you want to send the SMS messages to.
+ //Send the AT command AT+CNUM to the radio to obtain the phone number of the radio.
+ const char PHONE_NUMBER[] = "";
+
+ /** STMicro Nucelo F401RE
+ * The supported jumper configurations of the MTSAS do not line up with
+ * the pin mapping of the Nucleo F401RE. Therefore, the MTSAS serial TX
+ * pin (JP8 Pin 2) must be manually jumped to Serial1 RX (Shield pin D2)
+ * and the MTSAS serial RX pin (JP9 Pin 2) pin must be manually jumped to
+ * Serial1 TX (Shield pin D8).
+ * Uncomment the following line to use the STMicro Nuceleo F401RE
+ */
+ MTSSerialFlowControl* io = new MTSSerialFlowControl(D8, D2, D3, D6);
+
+ /** Freescale KL46Z
+ * To configure the pins for the Freescale KL46Z board, use configuration B
+ * for the SocketModem. The TX pin should be jumped to pin D2 (JP8), and the
+ * RX pin should be jumped to pin D9 (JP9).
+ * Uncomment te following line to use the Freescale KL46Z board
+ */
+ //MTSSerialFlowControl* io = new MTSSerialFlowControl(D2, D9, D3, D6);
+
+ /** Freescale KL64F
+ * To configure the pins for the Freescale KL46Z board, use configuration A
+ * for the SocketModem. The TX pin should be jumped to pin D1 (JP8), and the
+ * RX pin should be jumped to pin D0 (JP9).
+ * Uncomment te following line to use the Freescale KL46F board
+ */
+ //MTSSerialFlowControl* io = new MTSSerialFlowControl(D1, D0, D3, D6);
+
+ //Sets the baudrate for communicating with the radio
+ io->baud(115200);
+
+ Cellular* radio = CellularFactory::create(io);
+ radio->setApn(APN);
+ wait(15);
+
+ //Delete all SMS messages
+ radio->sendBasicCommand("AT+CMGD=1,4", 1000);
+
+ //Setup commands and settings
+ radio->sendBasicCommand("AT+CMGF=1", 1000);
+
+ /** If the radio is and H5 type (MTSMC_H5, MTSMC_H5_IP) then
+ * uncomment the first line. Otherwise, uncomment the second line.
+ */
+ radio->sendBasicCommand("AT+CSMP=17,167,0,0", 1000);
+ //radio->sendBasicCommand("AT+CSMP=,4098,0,2", 1000);
+
+ //Format message and send to radio
+ char command[100] = {0};
+ sprintf(command, "AT+CMGS=\"%s\"", PHONE_NUMBER);
+ radio->sendCommand(command, 1000);
+ radio->sendCommand("Hello from MultiTechSystems!", 5000, CTRL_Z);
+ wait(5);
+
+ //Read all messages received
+ std::string received = radio->sendCommand("AT+CMGL=\"ALL\"", 2000);
+ printf("Messages received:\n%s", received.c_str());
+
+ //Delete all messages
+ radio->sendBasicCommand("AT+CMGD=1,4", 1000);
+
+ printf("End of example code\n");
+ return 0;
+}
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Thu Jul 24 19:24:37 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/04dd9b1680ae \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mtsas-dev.lib Thu Jul 24 19:24:37 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/Multi-Hackers/code/mtsas-dev/#a01d59c20e38