Important changes to forums and questions
All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.
9 years, 2 months ago.
ADC In to DAC Out Nucleo 302FR8 334FR8 L152RE How to configure the DAC Out?
Hi,
Im Jesse. real new. Got a fair amount of hardware experience but this programming and MCU stuff is taking a while to stick. Struggling a little to grasp the basics here.
Like to make my Nucleo 302FR8 read an ADC/AnalogIn (PA_0 or whichever one really, doesn't matter much) and output it via the DAC (PA_4)
Done a ton of googling and searching... I get the Nucleo_read_analog_value: https://developer.mbed.org/teams/ST/code/Nucleo_read_analog_value/file/6d058686efbf/main.cpp
So AnalogIn will configure the pin for the Nucleos ADC (Is that right, or when it's being programmed like the Arduino is it implemented differently?)
Most of the stuff I can find on the DAC is a Sinewave out and I can't extrapolate how to configure a pin for the DAC out. The Appnotes and Datasheets are a little over my head and don't necessarily apply directly to the MBED implementation.
How can I get from :
include the mbed library with this snippet
#include "mbed.h" AnalogIn analog_value(A0); DigitalOut led(LED1); int main() { float meas; printf("\nAnalogIn example\n"); while(1) { meas = analog_value.read(); // Converts and read the analog input value (value from 0.0 to 1.0) meas = meas * 3300; // Change the value to be in the 0 to 3300 range printf("measure = %.0f mV\n", meas); if (meas > 2000) { // If the value is greater than 2V then switch the LED on led = 1; } else { led = 0; } wait(0.2); // 200 ms } }
to having the read analog value output from DAC pin PA_4?
Thanks!