Grove Shield V2

As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together

Hello World

Import programSeeed_Grove_Shield_Example

Example program for the SeeedStudio Grove Shield V2.0, based on multiple grove components. This program uses Grove Digit Display on UART, Grove Relay on D4, Grove LED Bar on D5, Grove Light Sensor on A0 and Grove Potentiometer (Rotary Angle Sensor) on A3.

Library

Import programSeeed_Grove_Shield_Example

Example program for the SeeedStudio Grove Shield V2.0, based on multiple grove components. This program uses Grove Digit Display on UART, Grove Relay on D4, Grove LED Bar on D5, Grove Light Sensor on A0 and Grove Potentiometer (Rotary Angle Sensor) on A3.

Notes

As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products.

Features

Power Compatible: Every Grove connector has four wires, one of which is Vcc. However, not every micro-controller main board needs a supply voltage of 5V, some need 3.3V. That's why we add a power switch to Base Shield v2. In this way, you can adjust the voltage of Vcc via this switch, making sure the voltage of Vcc is the same as supply power of the main board.

So While using Arduino UNO with Base Shield v2, please turn the switch to 5v position; While using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v. The number of pinout is the same as that of Arduino UNO R3.

Added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

http://www.seeedstudio.com/wiki/images/thumb/0/05/Base_Shield_v2_-3.png/800px-Base_Shield_v2_-3.png

Resources


You need to log in to post a discussion