Revision 5:b3bcb048a5a5, committed 2015-12-11

Comitter:

mbedAustin

Date:

Fri Dec 11 00:37:37 2015 +0000

Parent:

4:3c1d712dcc48

Child:

6:694279899cf2

Commit message:

changed settings for Nucleo 411 board

Changed in this revision

--- a/FXOS8700Q.lib	Fri Dec 11 00:25:01 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://mbed.org/users/JimCarver/code/FXOS8700Q/#5553a64d0762

--- a/main.cpp	Fri Dec 11 00:25:01 2015 +0000
+++ b/main.cpp	Fri Dec 11 00:37:37 2015 +0000
@@ -1,26 +1,19 @@
 #include "mbed.h"
-#include "FXOS8700Q.h"
 #include "M2XStreamClient.h"
 #include "ESP8266Interface.h"
 #include "TCPSocketConnection.h"
 
-
-#ifndef MAX
-#define max(a,b) ({ __typeof__ (a) _a = (a); __typeof__ (b) _b = (b); _a > _b ? _a : _b; })
-#endif
-
-#ifndef MIN
-#define min(a,b) ({ __typeof__ (a) _a = (a); __typeof__ (b) _b = (b); _a < _b ? _a : _b; })
-#endif
-
+//
+// Fill these field in from you ATT M2X Account
+//
 char deviceId[] = "<device id>"; // Device you want to push to
 char streamName[] = "<stream name>"; // Stream you want to push to
 char m2xKey[] = "<m2x api key>"; // Your M2X API Key or Master API Key
 
 /*
-*  ESP8266 Wifi Config, connect it to D0 on Seeed Grove shield
+*  ESP8266 Wifi Config for nucleo 411
 */
-ESP8266Interface wifi(D1,D0,D3,"wifi-name","wifi-password",115200); // TX,RX,Reset,SSID,Password,Baud 
+ESP8266Interface wifi(D8,D2,D3,"wifi-name","wifi-password",115200); // TX,RX,Reset,SSID,Password,Baud 
 
 int main()
 {
@@ -33,37 +26,16 @@
 
     // Initialize the M2X client
     Client client;
-    M2XStreamClient m2xClient(&client, m2xKey,1,"52.22.150.98");
+    M2XStreamClient m2xClient(&client, m2xKey,1,"52.22.150.98"); // api-m2x.att.com
+    
     int ret;
-
-    // Create an accelerometer instance
-    FXOS8700Q_acc acc( PTE25, PTE24, FXOS8700CQ_SLAVE_ADDR1); // Proper Ports and I2C Address for K64F Freedom board
-    acc.enable();
-    printf("\r\n\nFXOS8700Q Who Am I= %X\r\n", acc.whoAmI());
+    volatile int randomNumber = 0;
 
     while (true) {
-
-        float x, y, z;
-        acc.getX(&x);
-        acc.getY(&y);
-        acc.getZ(&z);
-
-        printf("Accel X: %1.2f, Y: %1.2f, Z: %1.2f\n\r", x, y, z);
-
-        // Calculate pitch and roll. Find the maximum tilt angle.
-        float pitch = atan(x / sqrt(y * y + z * z));
-        float roll = atan(y / sqrt(x * x + z * z));
-        float maxTilt =
-            max(abs(roll), abs(pitch)) * 180.0 / 3.14159;
-        printf("pitch: %5.1f roll: %5.1f maxTilt: %5.1f\n\r",
-               pitch, roll, maxTilt);
-
-        // If the maximum title is over 20 degrees, then send
-        // data to stream
-        
-            ret = m2xClient.updateStreamValue(deviceId, streamName, maxTilt);
-            printf("send() returned %d\r\n", ret);
-            wait(1.0);
-        
+        // send a random number to M2X every 5 seconds
+        randomNumber = rand();
+        ret = m2xClient.updateStreamValue(deviceId, streamName, randomNumber);
+        printf("send() returned %d\r\n", ret);
+        wait(5.0);
     }
 }
\ No newline at end of file