Sarah Marsh
Pong program with multiple dependencies to test pgen
Dependencies: Beep C12832 LM75B MMA7660 mbed
Revision 0:3bf62dd01ca9, committed 2015-08-14
- Comitter:
- sarahmarshy
- Date:
- Fri Aug 14 14:52:33 2015 +0000
- Commit message:
- Example of program with multiple dependencies to test pgen
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Beep.lib Fri Aug 14 14:52:33 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/shimniok/code/Beep/#3eb39e374fc3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/C12832.lib Fri Aug 14 14:52:33 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/askksa12543/code/C12832/#990d5eec2ef6
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/LM75B.lib Fri Aug 14 14:52:33 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/neilt6/code/LM75B/#7ac462ba84ac
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MMA7660.lib Fri Aug 14 14:52:33 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Sissors/code/MMA7660/#36a163511e34
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Fri Aug 14 14:52:33 2015 +0000
@@ -0,0 +1,106 @@
+#include "mbed.h"
+#include "LM75B.h"
+#include "C12832.h"
+#include "MMA7660.h"
+#include "Beep.h"
+
+
+// Using Arduino pin notation
+C12832 lcd(D11, D13, D12, D7, D10);
+//Accelerometer
+MMA7660 MMA(D14,D15);
+//Temp Sensor
+LM75B sensor(D14,D15);
+//Speaker
+Beep beeper(D6);
+//Red LED
+PwmOut r (D5);
+//Green LED
+PwmOut g (D9);
+
+void pong(int ball_x, int y_pos){
+ //bottom of the paddle
+ int bottom_y = y_pos+10;
+ //ball's y_location
+ int ball_y = 15;
+ //ball moving right
+ bool right = true;
+ //ball moving down
+ bool ball_down = true;
+ while(true) {
+ //refresh the position of ball and paddle
+ lcd.line(120, y_pos, 120, bottom_y, 1);
+ lcd.fillcircle(ball_x, ball_y, 3, 1);
+ wait(.03);
+ lcd.fillcircle(ball_x, ball_y, 3, 0);
+ lcd.line(120, y_pos, 120, bottom_y, 0);
+
+ //check if the ball has hit the paddle
+ if(ball_x+3 == 120 && ball_y>y_pos && ball_y<bottom_y && right){
+ right = false;//now it is moving left
+ beeper.beep(500, 0.25);//beep
+ r = 1.0;//turn off the red LED
+ g = 0.0;//turn on green
+ }
+ //check if the ball is behind the paddle
+ if(ball_x >= 124){
+ right = false;//now it is moving left
+ beeper.beep(500, 0.25);//beep
+ g = 1.0;//turn off green LED
+ r = 0.0;//turn on red
+ }
+ //if it hits the left wall
+ if(ball_x<=3){
+ right = true;
+ }
+ //if it hits the top or bottom
+ if(ball_y<=3 || ball_y >= 29){
+ ball_down = not(ball_down);//reverse y direction
+ }
+ if(right){
+ ball_x+=2;//increase ball's x pos by 2 if moving right
+ }
+ else{
+ ball_x-=2;//decrease vy 2 if left
+ }
+ if(ball_down){
+ ball_y++;//move ball's y pos down 1(higher y value's toward bottom of LCD) if the ball is moving down
+ }
+ else{
+ ball_y--;//ball's y up 1 if ball moving up
+ }
+ //Check if accelerometer is tilted away and the paddle hasn't hit the top
+ if(MMA.x() > 0 && y_pos > 0){
+ y_pos-=3;//top of paddle moved up by 3
+ bottom_y = y_pos+10;//set the bottom of the paddle to 10 below top
+ }
+ else if(MMA.x() < 0 && y_pos < 21){//Check if accelerometer is tilted toward and the paddle hasn't hit the bottom
+ y_pos+=3;//top of paddle moves down 3
+ bottom_y = y_pos+10;//bottom of the paddle is 10 pixels below top
+ }
+ }
+}
+int main()
+{
+ //Turn LEDs off
+ r = 1.0;
+ g = 1.0;
+ //clear the screen
+ lcd.cls();
+ lcd.locate(0,3);
+ //Display the temp and countfown
+ lcd.printf("Temp = %.1f C\nPong will begin in: 3...\n",sensor.temp());
+ wait(1);
+ lcd.cls();
+ lcd.locate(0,3);
+ lcd.printf("Temp = %.1f C\nPong will begin in: 2...\n",sensor.temp());
+ wait(1);
+ lcd.cls();
+ lcd.locate(0,3);
+ lcd.printf("Temp = %.1f C\nPong will begin in: 1...\n",sensor.temp());
+ wait(1);
+ lcd.cls();
+ //start pong
+ pong(3,0);
+
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Fri Aug 14 14:52:33 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/cbbeb26dbd92 \ No newline at end of file