main.cpp

00001 /*
00002     Copyright (c) 2011 Pro-Serv
00003  
00004     Permission is hereby granted, free of charge, to any person obtaining a copy
00005     of this software and associated documentation files (the "Software"), to deal
00006     in the Software without restriction, including without limitation the rights
00007     to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
00008     copies of the Software, and to permit persons to whom the Software is
00009     furnished to do so, subject to the following conditions:
00010  
00011     The above copyright notice and this permission notice shall be included in
00012     all copies or substantial portions of the Software.
00013  
00014     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
00015     IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
00016     FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
00017     AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
00018     LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
00019     OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
00020     THE SOFTWARE.
00021     
00022     Usage and assumptions:
00023     Based on TSOP 1738 IR device, Vcc to 5Volt, Gnd to Gnd, Out has pull-up of 10K
00024     to Vcc and Out has diode (Cathode to Out) connected to pin (p16) (Anode to p16)
00025     and pin (p16) has mode PullUp
00026     
00027     This will allow a "standard" RC5 device to be used to read it transmitted codes.
00028     Still work in progress (in due time) to add newer rc6 devices
00029     
00030     Excellent source on RC5 protocol: http://www.ustr.net/infrared/infrared1.shtml
00031  */
00032  
00033 #include "mbed.h"
00034 #include "RC5Detect.h"
00035 
00036 RC5Detect  rc5 ( p16, PullUp);
00037 
00038 DigitalOut led1( LED1 );
00039 
00040 int main() {
00041 
00042     //rc5.setAssertValue( 0 );
00043     rc5.setDelaySample(4820);
00044     rc5.setIntervalSample(1778);
00045 
00046     while(1) {
00047         if (rc5.getReadyState()) {
00048             printf("RC5 received, address = %d, command = %d\n", rc5.getRC5Address(), rc5.getRC5Command());
00049             rc5.setReadyState(0);
00050         }
00051         led1 = 1;
00052         wait(0.2);
00053         led1 = 0;
00054         wait(0.2);
00055     }
00056 }