Revision 4:227f0a670091, committed 2012-11-09

Comitter:

newk8600

Date:

Fri Nov 09 19:28:09 2012 +0000

Parent:

1:2935199329b2

Child:

5:34e9a3921278

Commit message:

init commit

Changed in this revision

--- a/main.cpp	Mon Nov 05 19:31:55 2012 +0000
+++ b/main.cpp	Fri Nov 09 19:28:09 2012 +0000
@@ -2,247 +2,29 @@
 *
 *
 *
-* 1.8 - 3.6V (Vdd)
-* 1.62 - 3.6 (Vddio)
+* 
+* 
 *
 *
-*Altitude = 44330*(1-(p/p0)^(1/5.255))
-*   set p0 to sealevel pressure
-* delta p = 1hPa = 8.43m at sea level
 *
-*/
-
-/*
-*Pinout:
-*pin9  = SDA
-*pin10 = SCL
-*pin11 = XCLR (digital out; active low; Resets sensor)
-*pin12 = EOC ("end of conversation"; signal when conversion finished)
-*
-*
+*   
+* 
 *
 */
 
-class BMP085
-{
-
-public:
-    BMP085();
-    //BMP085();
-    
-    float get_temperature();
-    long get_pressure();
-    void calculations(long);
-
-protected:
-    void init(BMP085_OSS);
-    unsigned short read_short (int, int);
-    void write_char (int, int, int);
-    
-    I2C i2c;
-    float temperature;
-    long pressure;
-    
-private:
-    short AC1, AC2, AC3, B1, B2, MB, MC, MD, OSS;
-    unsigned short  AC4, AC5, AC6;   
-};
-
 #include "mbed.h"
-
-enum bmp085_oss {ULTRALOW,  //samples 1 time
-                 STANDARD,  //samples twice
-                 HIGH,      //samples 4 times
-                 ULTRAHIGH};//samples 8 times
-
-
-I2C i2c(p9, p10); // sda, scl
-Serial pc(USBTX, USBRX); // tx, rx
-
-const int bmp085_address = 0xEE; //address of bmp085
-const int P0 = 101325; //pressure at sea level
-
-
-void bmp085_calibration(void);
-void display_calibration(void);
-unsigned short read_short(int,int);
-void write_char(int,int,int);
-
-long get_raw_temp(void);
-void calculations(long);
-
-float get_temperature(void);
-long get_pressure(void);
-float get_altitude(long);
-
-//short AC1, AC2, AC3, B1, B2, MB, MC, MD, OSS;
-//unsigned short  AC4, AC5, AC6;
-
-
-
-
+#include "BMP085.h"
 
 
 int main()
 {
 
-    //Initialize
-    OSS = STANDARD; //change between enums under bmp085_oss for desired Sampling resolution
-
-    //calibrate
-    bmp085_calibration();
-    display_calibration();
-
-    long raw_temp = get_raw_temp();
-
-    calculations(raw_temp);
-
-    //float altitude = get_altitude(pressure);
-
-    //pc.printf("Temperature: %f\n",temperature);
-    //pc.printf("Pressure: %l\n", pressure);
-    //pc.printf("Altitude: %f\n", altitude);
-
-
-}
-
-long get_raw_temp(void)
-{
-    long raw_temp;
-
-    //Read raw temperature value
-    write_char(bmp085_address, 0xF4, 0x2E);
-    wait_ms(4.5);
-    raw_temp = read_short(bmp085_address, 0xF6);
-
-    return raw_temp;
-}
-
-void calculations(long raw_temp)
-{
-    long X1, X2, B5; //temperature;
-
-    //Start temperature calculation
-    X1 = (((long)raw_temp - (long)AC6) * (long)AC5) >> 15;
-    X2 = ((long)MC << 11) / (X1 + MD);
-    B5 = X1 + X2;
-    temperature = ((B5 + 8) >> 4);
-
-    temperature = ((float)temperature / 10.0);
-
-    pc.printf("Temperature: %f\n",temperature);
-
-
-    long raw_pressure, B6, B3, X3;
-    unsigned long B4, B7;
-
-    //Read raw pressure value
-    write_char(bmp085_address, 0xf4, 0x34 | (OSS << 6));
-    wait_ms(5);
-    raw_pressure = read_short(bmp085_address, 0xF6) >> (8 - OSS);
-
-    //Start Pressure calculation
-    B6 = B5 - 4000;
-    X1 = (B2 * (B6 * B6) >> 12) >> 11;
-    X2 = (AC2 * B6) >> 11;
-    X3 = X1 + X2;
-    B3 = (((AC1 * 4 + X3) << OSS + 2) / 4);
-    X1 = (AC3 * B6) >> 13;
-    X2 = (B1 * ((B6 * B6) >> 12)) >> 16;
-    X3 = ((X1 + X2) + 2) >> 2;
-    B4 = (AC4 * (unsigned long)(X3 + 32768)) >> 15;
-    B7 = ((unsigned long)(raw_pressure - B3) * (50000 >> OSS));
-    if (B7 < 0x80000000)
-        pressure = (B7 *2) / B4;
-    else
-        pressure = (B7 / B4) * 2;
-
-    X1 = (pressure >> 8) * (pressure >>8);
-    X1 = (X1 * 3038) >>16;
-    X2 = (-7357 * pressure) >>16;
-    pressure += (X1 + X2 + 3791)>>4;
-
-    pc.printf("Pressure: %f\n", pressure);
-
-}
 
-float get_temperature(void)
-{
-    return temperature;
-}
-
-long get_pressure(void)
-{
-    return pressure;
+    alt_sensor.display_cal_param(&pc);
+    
+    pc.printf("Temperature: %d\r\n", alt_sensor.get_temperature());
+    pc.printf("Pressure: %d\r\n", alt_sensor.get_pressure());
+    pc.printf("Altitude: %f\r\n", alt_sensor.get_altitude_ft());
 }
-
-float get_altitude(long pressure)
-{
-    float altitude;
-
-    altitude = (float)44330 * (1 - pow(( pressure/P0), 0.190295));
-
-    pc.printf("Altitude: %f\n", altitude);
-    return altitude;
-
-}
-
-void bmp085_calibration(void)
-{
-    AC1 = read_short(bmp085_address, 0xAA);
-    AC2 = read_short(bmp085_address, 0xAC);
-    AC3 = read_short(bmp085_address, 0xAE);
-    AC4 = read_short(bmp085_address, 0xB0);
-    AC5 = read_short(bmp085_address, 0xB2);
-    AC6 = read_short(bmp085_address, 0xB4);
-    B1  = read_short(bmp085_address, 0xB6);
-    B2  = read_short(bmp085_address, 0xB8);
-    MB  = read_short(bmp085_address, 0xBA);
-    MC  = read_short(bmp085_address, 0xBC);
-    MD  = read_short(bmp085_address, 0xBE);
-
-}
+    
 
-void display_calibration(void)
-{
-    pc.printf("Calibration Values:\n");
-    pc.printf("AC1 = %d\n",AC1);
-    pc.printf("AC2 = %d\n",AC2);
-    pc.printf("AC3 = %d\n",AC3);
-    pc.printf("AC4 = %d\n",AC4);
-    pc.printf("AC5 = %d\n",AC5);
-    pc.printf("AC6 = %d\n",AC6);
-    pc.printf("B1 = %d\n",B1);
-    pc.printf("B2 = %d\n",B2);
-    pc.printf("MB = %d\n",MB);
-    pc.printf("MC = %d\n",MC);
-    pc.printf("MD = %d\n",MD);
-}
-
-unsigned short read_short(int device_address,int address)
-{
-    unsigned short value;
-
-    i2c.start();
-    i2c.write(device_address);
-    i2c.write(address);
-
-    i2c.start();
-    i2c.write(device_address | 1);
-    value = i2c.read(1) << 8;
-    value |= i2c.read(0);
-    i2c.stop();
-
-    return value;
-
-}
-
-void write_char(int device_address, int address, int data)
-{
-    i2c.start();
-    i2c.write(device_address);
-    i2c.write(address);
-    i2c.write(data);
-    i2c.stop();
-}
-