lzbp li
mbed library sources 只保留l0和l1系列的库，修改l0的库的晶振为12m
Dependents: SANFAN_read_analog_value nucleo-wdg Nucleo_sleep_copy
Fork of
mbed-src
by 
mbed official
Revision 637:43dc64e319ca, committed 2016-04-29
- Comitter:
- lzbpli
- Date:
- Fri Apr 29 08:15:28 2016 +0000
- Parent:
- 636:cdb71f051ab2
- Commit message:
- ok
Changed in this revision
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/PeripheralPins.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,81 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM1 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
-// {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16)}, // TIM16_CH1
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH1
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM15)}, // TIM15_CH1N
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLDOWN, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,241 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
-
-
- // Arduino connector namings
- A0 = PC_0,
- A1 = PC_1,
- A2 = PC_2,
- A3 = PC_3,
- A4 = PC_4,
- A5 = PC_5,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PB_12,
- D3 = PB_11,
- D4 = PA_7,
- D5 = PB_9,
- D6 = PB_8,
- D7 = PA_6,
- D8 = PA_5,
- D9 = PA_4,
- D10 = PA_11,
- D11 = PB_5,
- D12 = PB_4,
- D13 = PB_3,
-// D14 = PB_9,
-// D15 = PB_8,
-
- // STM32F0-Discovery(STM32F051R8) connector namings
- PA0 = PA_0,
- PA1 = PA_1,
- PA2 = PA_2,
- PA3 = PA_3,
- PA4 = PA_4,
- PA5 = PA_5,
- PA6 = PA_6,
- PA7 = PA_7,
- PA8 = PA_8,
- PA9 = PA_9,
- PA10 = PA_10,
- PA11 = PA_11,
- PA12 = PA_12,
- PA13 = PA_13,
- PA14 = PA_14,
- PA15 = PA_15,
-
- PC0 = PC_0,
- PC1 = PC_1,
- PC2 = PC_2,
- PC3 = PC_3,
- PC4 = PC_4,
- PC5 = PC_5,
- PC6 = PC_6,
- PC7 = PC_7,
- PC8 = PC_8,
- PC9 = PC_9,
- PC10 = PC_10,
- PC11 = PC_13,
- PC12 = PC_12,
- PC13 = PC_13,
- PC14 = PC_14,
- PC15 = PC_15,
-
- PD2 = PD_2,
-
- PB0 = PB_0,
- PB1 = PB_1,
- PB2 = PB_2,
- PB3 = PB_3,
- PB4 = PB_4,
- PB5 = PB_5,
- PB6 = PB_6,
- PB7 = PB_7,
- PB8 = PB_8,
- PB9 = PB_9,
- PB10 = PB_10,
- PB11 = PB_11,
- PB12 = PB_12,
- PB13 = PB_13,
- PB14 = PB_14,
- PB15 = PB_15,
- // Generic signals namings
- LED1 = PC_9,
- LED2 = PC_8,
- LED3 = PC_9,
- LED4 = PC_8,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -//#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,109 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,76 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM1 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
-// {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16)}, // TIM16_CH1
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH1
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM15)}, // TIM15_CH1N
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLDOWN, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,188 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
-
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PC_7,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,104 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,72 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_15
-#define STDIO_UART UART_1
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,142 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2)}, // TIM2_CH2
-// {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2)}, // TIM2_CH3
-// {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
-// {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16)}, // TIM16_CH1
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM1)}, // TIM1_CH4
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM1)}, // TIM1_CH2N
-// {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_TIM14)}, // TIM14_CH1
- {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_1, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_2, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // STDIO TX
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
-// {PA_14, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // SWCLK
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // STDIO RX
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
-// {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,156 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_3,
- A3 = PA_4,
- A4 = PA_5,
- A5 = PA_6,
- A6 = PA_7,
- A7 = PA_2,
- D0 = PA_10,
- D1 = PA_9,
- D2 = PA_12,
- D3 = PB_0,
- D4 = PB_7,
- D5 = PB_6,
- D6 = PB_1,
- D7 = PF_0,
- D8 = PF_1,
- D9 = PA_8,
- D10 = PA_11,
- D11 = PB_5,
- D12 = PB_4,
- D13 = PB_3,
-
- // Generic signals namings
- LED1 = PB_3,
- LED2 = PB_3,
- LED3 = PB_3,
- LED4 = PB_3,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_15,
- USBTX = PA_2,
- USBRX = PA_15,
- I2C_SCL = PA_9,
- I2C_SDA = PA_10,
- SPI_MOSI = PB_5,
- SPI_MISO = PB_4,
- SPI_SCK = PB_3,
- SPI_CS = PB_1,
- PWM_OUT = PB_0,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,47 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2, /* used for compilation needs */
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F031K6/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,104 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)USART4_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,184 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM1 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
- {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
-// {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
-// {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
-// {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
-// {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
-// {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
- {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
-// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
-// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,183 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F070RB/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,104 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)USART4_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,198 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 (Warning: LED1 is also on this pin)
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
-// {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
- {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
-// {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
-// {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
-// {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
- {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
-// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
-// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,183 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F072RB/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,109 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,86 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)USART4_BASE,
- UART_5 = (int)USART5_BASE,
- UART_6 = (int)USART6_BASE,
- UART_7 = (int)USART7_BASE,
- UART_8 = (int)USART8_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_14 = (int)TIM14_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,220 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC_OUT2 (Warning: LED1 is also on this pin)
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PA_12, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
-// {PF_0, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // OSC_IN
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PA_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)},
- {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
-// {PF_1, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // OSC_OUT
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH1
-// {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
- {PA_3, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15)}, // TIM15_CH2
-// {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
-// {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16)}, // TIM16_CH1
-// {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
-// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14)}, // TIM14_CH1
- {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17)}, // TIM17_CH1
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH4
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14)}, // TIM14_CH1
-// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17)}, // TIM17_CH1
-// {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH3
-// {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)}, // TIM15_CH2
-// {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)}, // TIM1_CH3N
-// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15)}, // TIM15_CH1N
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_4, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // Warning: SWCLK is also on this pin
- {PB_3, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
-// {PC_0, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
- {PC_0, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)},
- {PC_2, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)},
- {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
- {PC_8, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
-// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PA_5, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
- {PB_4, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)},
-// {PC_1, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
- {PC_1, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)},
- {PC_3, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PC_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)},
- {PC_9, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)},
-// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,184 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_11 = 0x5B,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_4,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F091RC/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,109 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/analogin_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,181 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-#include "mbed_error.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin) {
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV;
- AdcHandle.Init.LowPowerAutoWait = DISABLE;
- AdcHandle.Init.LowPowerAutoPowerOff = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
- if (HAL_ADC_Init(&AdcHandle) != HAL_OK) {
- error("Cannot initialize ADC");
- }
- // Run the ADC calibration
- if (HAL_ADCEx_Calibration_Start(&AdcHandle) != HAL_OK) {
- error("Cannot Start ADC_Calibration");
- }
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj) {
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
-#if defined (TARGET_STM32F091RC)
- sConfig.SamplingTime = ADC_SAMPLETIME_13CYCLES_5;
-#else
- sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
-#endif
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
-#if !defined (TARGET_STM32F031K6)
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
-#endif
- default:
- return 0;
- }
-
- // Clear all channels as it is not done in HAL_ADC_ConfigChannel()
- AdcHandle.Instance->CHSELR = 0;
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj) {
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj) {
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/analogout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,128 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-#define DAC_RANGE (0xFFF) // 12 bits
-
-static DAC_HandleTypeDef DacHandle;
-
-void analogout_init(dac_t *obj, PinName pin) {
- DAC_ChannelConfTypeDef sConfig;
-
- DacHandle.Instance = DAC;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
- MBED_ASSERT(obj->dac != (DACName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the channel for future use
- obj->pin = pin;
-
- // Enable DAC clock
- __DAC1_CLK_ENABLE();
-
- // Configure DAC
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
-
- if (pin == PA_4) {
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
- } else { // PA_5
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2);
- }
-
- analogout_write_u16(obj, 0);
-}
-
-void analogout_free(dac_t *obj) {
- // Reset DAC and disable clock
- __DAC1_FORCE_RESET();
- __DAC1_RELEASE_RESET();
- __DAC1_CLK_DISABLE();
-
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value) {
- if (obj->pin == PA_4) {
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_1);
- } else { // PA_5
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_2);
- }
-}
-
-static inline int dac_read(dac_t *obj) {
- if (obj->pin == PA_4) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- } else { // PA_5
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
-}
-
-void analogout_write(dac_t *obj, float value) {
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)DAC_RANGE));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value) {
- if (value > (uint16_t)DAC_RANGE) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, value);
- }
-}
-
-float analogout_read(dac_t *obj) {
- uint32_t value = dac_read(obj);
- return (float)((float)value * (1.0f / (float)DAC_RANGE));
-}
-
-uint16_t analogout_read_u16(dac_t *obj) {
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/gpio_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin) {
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin) {
- obj->pin = pin;
- if (pin == (PinName)NC) {
- return;
- }
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode) {
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/gpio_irq_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,258 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0_1, EXTI2_3, EXTI4_15)
-#define CHANNEL_NUM (3)
-
-// Max pins for one line (max with EXTI4_15)
-#define MAX_PIN_LINE (12)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0_1
- 0, // pin 0
- 1, // pin 1
- // EXTI2_3
- 0, // pin 2
- 1, // pin 3
- // EXTI4_15
- 0, // pin 4
- 1, // pin 5
- 2, // pin 6
- 3, // pin 7
- 4, // pin 8
- 5, // pin 9
- 6, // pin 10
- 7, // pin 11
- 8, // pin 12
- 9, // pin 13
- 10, // pin 14
- 11 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line) {
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI lines 0 to 1
-static void gpio_irq0(void) {
- handle_interrupt_in(0, 2);
-}
-
-// EXTI lines 2 to 3
-static void gpio_irq1(void) {
- handle_interrupt_in(1, 2);
-}
-
-// EXTI lines 4 to 15
-static void gpio_irq2(void) {
- handle_interrupt_in(2, 12);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) {
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- if ((pin_index == 0) || (pin_index == 1)) {
- irq_n = EXTI0_1_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- } else if ((pin_index == 2) || (pin_index == 3)) {
- irq_n = EXTI2_3_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- } else if ((pin_index > 3) && (pin_index < 16)) {
- irq_n = EXTI4_15_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- } else {
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj) {
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) {
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj) {
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj) {
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/gpio_object.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/i2c_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,382 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-#if defined(I2C2_BASE)
-int i2c2_inited = 0;
-#endif
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
-#if defined(I2C2_BASE)
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-#endif
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz) {
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // Common settings: I2C clock = 48 MHz, Analog filter = ON, Digital filter coefficient = 0
- switch (hz) {
- case 100000:
- I2cHandle.Init.Timing = 0x10805E89; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
- break;
- case 400000:
- I2cHandle.Init.Timing = 0x00901850; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
- break;
- case 1000000:
- I2cHandle.Init.Timing = 0x00700818; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
- HAL_I2C_Init(&I2cHandle);
-}
-
-inline int i2c_start(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- // Update CR2 register
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop
- if (stop) {
- i2c_stop(obj);
- // Wait until STOPF flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- // Clear STOP Flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj) {
- int timeout;
-
- // Wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
-#if defined(I2C2_BASE)
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
-#endif
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj) {
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length) {
- char size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length) {
- char size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/mbed_overrides.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-extern int stdio_uart_inited;
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init() {
- /* Configure the Cube driver */
- SystemCoreClock = 8000000; // At this stage the HSI is used as system clock
-
- HAL_Init();
-
- /* Configure the System clock source, PLL Multiplier and Divider factors,
- AHB/APBx prescalers and Flash settings */
- SetSysClock();
-
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
-
- // reset serial next time it is called, now that system clock is set
- stdio_uart_inited = 0;
-
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/pinmap.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,142 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset IT and EVT (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx) {
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
-#if defined(GPIOC_BASE)
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
-#endif
-#if defined(GPIOD_BASE)
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
-#endif
-#if defined(GPIOF_BASE)
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
-#endif
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data) {
- MBED_ASSERT(pin != (PinName)NC);
-
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect SWDIO and SWCLK signals ?
- // Warning: For debugging it is necessary to reconnect under reset if this is done.
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode) {
- MBED_ASSERT(pin != (PinName)NC);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2) pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/port_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,97 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n) {
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir) {
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir) {
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode) {
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value) {
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj) {
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/pwmout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,296 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin) {
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
-#if defined(TIM1_BASE)
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
-#endif
-#if defined(TIM2_BASE)
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
-#endif
-#if defined(TIM3_BASE)
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
-#endif
-#if defined(TIM14_BASE)
- if (obj->pwm == PWM_14) __TIM14_CLK_ENABLE();
-#endif
-#if defined(TIM15_BASE)
- if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
-#endif
-#if defined(TIM16_BASE)
- if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
-#endif
-#if defined(TIM17_BASE)
- if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
-#endif
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj) {
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value) {
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
-#if defined (TARGET_STM32F031K6)
- switch (obj->pin) {
- // Channels 1
- case PA_4:
- case PA_6:
- case PA_8:
- case PB_4:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PB_6:
- case PB_7:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_7:
- case PA_9:
- case PB_5:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 3
- case PA_10:
- case PB_0:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 4
- case PA_11:
- case PB_1:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-#elif defined (TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
- switch (obj->pin) {
- // Channels 1
- case PA_4:
- case PA_6:
- case PB_1:
- case PB_4:
- case PB_8:
- case PB_9:
- case PB_14:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PB_6:
- case PB_7:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_7:
- case PB_5:
- case PB_15:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 3
- case PB_0:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 4
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
-#else
- switch (obj->pin) {
- // Channels 1
- case PA_2:
- case PA_4:
- case PA_6:
- case PA_7:
- case PA_8:
- case PB_1:
- case PB_4:
- case PB_8:
- case PB_9:
- case PB_14:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
- // Channels 1N
- case PA_1:
- case PB_6:
- case PB_7:
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
- // Channels 2
- case PA_3:
- case PA_9:
- case PB_5:
- case PB_15:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
- // Channels 3
- case PA_10:
- case PB_0:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
- // Channels 4
- case PA_11:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
-#endif
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
-
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj) {
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds) {
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms) {
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us) {
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds) {
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) {
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us) {
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/rtc_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,196 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void) {
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // This value is LSI typical value. To be measured precisely using a timer input capture for example.
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void) {
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void) {
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void) {
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t) {
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/serial_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,508 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#if defined (TARGET_STM32F091RC)
-#define UART_NUM (8)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0, 0, 0, 0};
-
-#elif defined (TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
-#define UART_NUM (2)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0};
-
-#elif defined (TARGET_STM32F031K6)
-#define UART_NUM (1)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0};
-
-#else
-#define UART_NUM (4)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0};
-
-#endif
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj) {
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- // Disable the reception overrun detection
- UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
- UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx) {
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- obj->index = 0;
- }
-
-#if defined USART2_BASE
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- obj->index = 1;
- }
-#endif
-
-#if defined USART3_BASE
- if (obj->uart == UART_3) {
- __USART3_CLK_ENABLE();
- obj->index = 2;
- }
-#endif
-
-#if defined USART4_BASE
- if (obj->uart == UART_4) {
- __USART4_CLK_ENABLE();
- obj->index = 3;
- }
-#endif
-
-#if defined USART5_BASE
- if (obj->uart == UART_5) {
- __USART5_CLK_ENABLE();
- obj->index = 4;
- }
-#endif
-
-#if defined USART6_BASE
- if (obj->uart == UART_6) {
- __USART6_CLK_ENABLE();
- obj->index = 5;
- }
-#endif
-
-#if defined USART7_BASE
- if (obj->uart == UART_7) {
- __USART7_CLK_ENABLE();
- obj->index = 6;
- }
-#endif
-
-#if defined USART8_BASE
- if (obj->uart == UART_8) {
- __USART8_CLK_ENABLE();
- obj->index = 7;
- }
-#endif
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj) {
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
-
-#if defined(USART2_BASE)
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
-#endif
-
-#if defined USART3_BASE
- if (obj->uart == UART_3) {
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- }
-#endif
-
-#if defined USART4_BASE
- if (obj->uart == UART_4) {
- __USART4_FORCE_RESET();
- __USART4_RELEASE_RESET();
- __USART4_CLK_DISABLE();
- }
-#endif
-
-#if defined USART5_BASE
- if (obj->uart == UART_5) {
- __USART5_FORCE_RESET();
- __USART5_RELEASE_RESET();
- __USART5_CLK_DISABLE();
- }
-#endif
-
-#if defined USART6_BASE
- if (obj->uart == UART_6) {
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- }
-#endif
-
-#if defined USART7_BASE
- if (obj->uart == UART_7) {
- __USART7_FORCE_RESET();
- __USART7_RELEASE_RESET();
- __USART7_CLK_DISABLE();
- }
-#endif
-
-#if defined USART8_BASE
- if (obj->uart == UART_8) {
- __USART8_FORCE_RESET();
- __USART8_RELEASE_RESET();
- __USART8_CLK_DISABLE();
- }
-#endif
-
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate) {
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) {
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id) {
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
- }
- }
-}
-
-static void uart1_irq(void) {
- uart_irq(UART_1, 0);
-}
-
-#if defined(USART2_BASE)
-static void uart2_irq(void) {
- uart_irq(UART_2, 1);
-}
-#endif
-
-#if defined USART3_BASE
-static void uart3_irq(void) {
- uart_irq(UART_3, 2);
-}
-#endif
-
-#if defined USART4_BASE
-static void uart4_irq(void) {
- uart_irq(UART_4, 3);
-}
-#endif
-
-#if defined USART5_BASE
-static void uart5_irq(void) {
- uart_irq(UART_5, 4);
-}
-#endif
-
-#if defined USART6_BASE
-static void uart6_irq(void) {
- uart_irq(UART_6, 5);
-}
-#endif
-
-#if defined USART7_BASE
-static void uart7_irq(void) {
- uart_irq(UART_7, 6);
-}
-#endif
-
-#if defined USART8_BASE
-static void uart8_irq(void) {
- uart_irq(UART_8, 7);
-}
-#endif
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) {
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) {
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
-#if defined(USART2_BASE)
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-#endif
-
-#if defined (TARGET_STM32F091RC)
- if (obj->uart == UART_3) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-
- if (obj->uart == UART_4) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart4_irq;
- }
-
- if (obj->uart == UART_5) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart5_irq;
- }
-
- if (obj->uart == UART_6) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart6_irq;
- }
-
- if (obj->uart == UART_7) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart7_irq;
- }
-
- if (obj->uart == UART_8) {
- irq_n = USART3_8_IRQn;
- vector = (uint32_t)&uart8_irq;
- }
-
-#elif defined (TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
-
-#else
-#if defined(USART3_BASE)
- if (obj->uart == UART_3) {
- irq_n = USART3_4_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-#endif
-
-#if defined(USART4_BASE)
- if (obj->uart == UART_4) {
- irq_n = USART3_4_IRQn;
- vector = (uint32_t)&uart4_irq;
- }
-#endif
-#endif
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj) {
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->RDR & (uint16_t)0xFF);
-}
-
-void serial_putc(serial_t *obj, int c) {
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->TDR = (uint32_t)(c & (uint16_t)0xFF);
-}
-
-int serial_readable(serial_t *obj) {
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj) {
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj) {
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
-}
-
-void serial_pinout_tx(PinName tx) {
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj) {
- // [TODO]
-}
-
-void serial_break_clear(serial_t *obj) {
- // [TODO]
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/sleep.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,102 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-#if defined(TARGET_STM32F070RB)
-void sleep(void) {
- TIM_HandleTypeDef TimMasterHandle;
-
- TimMasterHandle.Instance = TIM1;
-
- // Disable HAL tick and us_ticker update interrupts
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick and us_ticker update interrupts
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
-}
-
-#elif defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
-void sleep(void) {
- // Stop HAL systick
- HAL_SuspendTick();
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
- // Restart HAL systick
- HAL_ResumeTick();
-}
-
-#else
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void) {
- TimMasterHandle.Instance = TIM2;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-#endif
-
-#if defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
-void deepsleep(void) {
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- HAL_InitTick(TICK_INT_PRIORITY);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-
- HAL_InitTick(TICK_INT_PRIORITY);
-}
-
-#else
-void deepsleep(void) {
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/spi_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,282 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj) {
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
-#if defined(SPI2_BASE)
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-#endif
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel != NC) {
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- } else {
- obj->nss = SPI_NSS_SOFT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj) {
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
-#if defined(SPI2_BASE)
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-#endif
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave) {
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (obj->nss != SPI_NSS_SOFT) {
- obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
- }
-
- obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz) {
- // Note: The frequencies are obtained with SPI clock = 48 MHz (APB clock)
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 188 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 750 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj) {
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value) {
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj) {
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj) {
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F0/us_ticker.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,291 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-
-#if defined(TARGET_STM32F030R8) || defined(TARGET_STM32F070RB)
-
-// Timer selection
-#define TIM_MST TIM1
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-volatile uint32_t SlaveCounter = 0;
-volatile uint32_t oc_int_part = 0;
-volatile uint16_t oc_rem_part = 0;
-
-void set_compare(uint16_t count) {
- TimMasterHandle.Instance = TIM_MST;
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_init(void) {
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read() {
- uint32_t counter, counter2;
- if (!us_ticker_inited) us_ticker_init();
- // A situation might appear when Master overflows right after Slave is read and before the
- // new (overflowed) value of Master is read. Which would make the code below consider the
- // previous (incorrect) value of Slave and the new value of Master, which would return a
- // value in the past. Avoid this by computing consecutive values of the timer until they
- // are properly ordered.
- counter = (uint32_t)(SlaveCounter << 16);
- counter += TIM_MST->CNT;
- while (1) {
- counter2 = (uint32_t)(SlaveCounter << 16);
- counter2 += TIM_MST->CNT;
- if (counter2 > counter) {
- break;
- }
- counter = counter2;
- }
- return counter2;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp) {
- int delta = (int)((uint32_t)timestamp - us_ticker_read());
- uint16_t cval = TIM_MST->CNT;
-
- if (delta <= 0) { // This event was in the past
- us_ticker_irq_handler();
- } else {
- oc_int_part = (uint32_t)(delta >> 16);
- oc_rem_part = (uint16_t)(delta & 0xFFFF);
- if (oc_rem_part <= (0xFFFF - cval)) {
- set_compare(cval + oc_rem_part);
- oc_rem_part = 0;
- } else {
- set_compare(0xFFFF);
- oc_rem_part = oc_rem_part - (0xFFFF - cval);
- }
- }
-}
-
-void us_ticker_disable_interrupt(void) {
- TimMasterHandle.Instance = TIM_MST;
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void) {
- TimMasterHandle.Instance = TIM_MST;
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
-}
-
-#elif defined (TARGET_STM32F051R8)
-
-// Timer selection:
-#define TIM_MST TIM1
-#define TIM_MST_UP_IRQ TIM1_BRK_UP_TRG_COM_IRQn
-#define TIM_MST_OC_IRQ TIM1_CC_IRQn
-#define TIM_MST_RCC __TIM1_CLK_ENABLE()
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-
-static int us_ticker_inited = 0;
-static volatile uint32_t SlaveCounter = 0;
-static volatile uint32_t oc_int_part = 0;
-static volatile uint16_t oc_rem_part = 0;
-
-void set_compare(uint16_t count) {
- TimMasterHandle.Instance = TIM_MST;
-
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-// Used to increment the slave counter
-static void tim_update_irq_handler(void) {
- TimMasterHandle.Instance = TIM_MST;
-
- // Clear Update interrupt flag
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE);
- SlaveCounter++;
- }
-}
-
-// Used by interrupt system
-static void tim_oc_irq_handler(void) {
- uint16_t cval = TIM_MST->CNT;
- TimMasterHandle.Instance = TIM_MST;
-
- // Clear CC1 interrupt flag
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
- if (oc_rem_part > 0) {
- set_compare(oc_rem_part); // Finish the remaining time left
- oc_rem_part = 0;
- } else {
- if (oc_int_part > 0) {
- set_compare(0xFFFF);
- oc_rem_part = cval; // To finish the counter loop the next time
- oc_int_part--;
- } else {
- us_ticker_irq_handler();
- }
- }
-
-}
-
-void us_ticker_init(void) {
-
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- // Enable timer clock
- TIM_MST_RCC;
-
- // Configure time base
- TimMasterHandle.Instance = TIM_MST;
- TimMasterHandle.Init.Period = 0xFFFF;
- TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 �s tick
- TimMasterHandle.Init.ClockDivision = 0;
- TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_Base_Init(&TimMasterHandle);
-
- // Configure interrupts
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_UPDATE);
-
- // Update interrupt used for 32-bit counter
- NVIC_SetVector(TIM_MST_UP_IRQ, (uint32_t)tim_update_irq_handler);
- NVIC_EnableIRQ(TIM_MST_UP_IRQ);
-
- // Output compare interrupt used for timeout feature
- NVIC_SetVector(TIM_MST_OC_IRQ, (uint32_t)tim_oc_irq_handler);
- NVIC_EnableIRQ(TIM_MST_OC_IRQ);
-
- // Enable timer
- HAL_TIM_Base_Start(&TimMasterHandle);
-}
-
-uint32_t us_ticker_read() {
- uint32_t counter, counter2;
- if (!us_ticker_inited) us_ticker_init();
- // A situation might appear when Master overflows right after Slave is read and before the
- // new (overflowed) value of Master is read. Which would make the code below consider the
- // previous (incorrect) value of Slave and the new value of Master, which would return a
- // value in the past. Avoid this by computing consecutive values of the timer until they
- // are properly ordered.
- counter = (uint32_t)(SlaveCounter << 16);
- counter += TIM_MST->CNT;
- while (1) {
- counter2 = (uint32_t)(SlaveCounter << 16);
- counter2 += TIM_MST->CNT;
- if (counter2 > counter) {
- break;
- }
- counter = counter2;
- }
- return counter2;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp) {
- int delta = (int)((uint32_t)timestamp - us_ticker_read());
- uint16_t cval = TIM_MST->CNT;
-
- if (delta <= 0) { // This event was in the past
- us_ticker_irq_handler();
- } else {
- oc_int_part = (uint32_t)(delta >> 16);
- oc_rem_part = (uint16_t)(delta & 0xFFFF);
- if (oc_rem_part <= (0xFFFF - cval)) {
- set_compare(cval + oc_rem_part);
- oc_rem_part = 0;
- } else {
- set_compare(0xFFFF);
- oc_rem_part = oc_rem_part - (0xFFFF - cval);
- }
- }
-}
-
-void us_ticker_disable_interrupt(void) {
- TimMasterHandle.Instance = TIM_MST;
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void) {
- TimMasterHandle.Instance = TIM_MST;
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
-}
-
-#else
-
-// 32-bit timer selection
-#define TIM_MST TIM2
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void) {
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read() {
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp) {
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void) {
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void) {
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/PeripheralPins.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,74 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,165 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM4 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH2 - Default
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH3 - Default (warning: not connected on D1 per default)
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH4 - Default (warning: not connected on D0 per default)
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH1 - Default
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH2 - Default
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH1N - GPIO_PartialRemap_TIM1
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH1 - Default
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH2 - Default
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH3 - Default
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH4 - Default
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH1_ETR - GPIO_FullRemap_TIM2
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH3 - Default
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH2N - GPIO_PartialRemap_TIM1
- {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH4 - Default
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH3N - GPIO_PartialRemap_TIM1
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH2 - GPIO_FullRemap_TIM2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 7)}, // TIM3_CH1 - GPIO_PartialRemap_TIM3
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 7)}, // TIM3_CH2 - GPIO_PartialRemap_TIM3
-// {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH1 - Default (used by ticker)
-// {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH2 - Default (used by ticker)
-// {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH3 - Default (used by ticker)
-// {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH4 - Default (used by ticker)
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH3 - GPIO_FullRemap_TIM2
- {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH4 - GPIO_FullRemap_TIM2
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH1N - Default
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH2N - Default
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH3N - Default
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH1 - GPIO_FullRemap_TIM3
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH2 - GPIO_FullRemap_TIM3
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH3 - GPIO_FullRemap_TIM3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH4 - GPIO_FullRemap_TIM3
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,203 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f3xx_hal_gpio.h and stm32f3xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
-
- // Arduino connector namings
- PA0 = PA_0,
- PA1 = PA_1,
- PA2 = PA_2,
- PA3 = PA_3,
- PA4 = PA_4,
- PA5 = PA_5,
- PA6 = PA_6,
- PA7 = PA_7,
- PA8 = PA_8,
- PA9 = PA_9,
- PA10 = PA_10,
- PA11 = PA_11,
- PA12 = PA_12,
- PA13 = PA_13,
- PA14 = PA_14,
- PA15 = PA_15,
-
- PC4 = PC_4,
- PC5 = PC_5,
- PC6 = PC_6,
- PC7 = PC_7,
- PC8 = PC_8,
- PC9 = PC_9,
- PC10 = PC_10,
- PC11 = PC_13,
- PC12 = PC_12,
-
- PD2 = PD_2,
-
- PB1 = PB_1,
- PB2 = PB_2,
- PB3 = PB_3,
- PB4 = PB_4,
- PB5 = PB_5,
- PB6 = PB_6,
- PB7 = PB_7,
- PB8 = PB_8,
- PB9 = PB_9,
- PB10 = PB_10,
- PB11 = PB_11,
- PB12 = PB_12,
- PB13 = PB_13,
- PB14 = PB_14,
- PB15 = PB_15,
-
-
- // Generic signals namings
- LED1 = PC_9,
- LED2 = PC_8,
- LED3 = PC_9,
- LED4 = PC_8,
- USER_BUTTON = PA_0,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_6,
- I2C_SDA = PB_7,
- SPI_MOSI = PB_15,
- SPI_MISO = PB_14,
- SPI_SCK = PB_13,
- SPI_CS = PB_12,
- PWM_OUT = PB_8,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_DISCO_F100RB/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,105 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_NUCLEO_F103RB/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,74 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_NUCLEO_F103RB/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,165 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM4 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH2 - Default
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH3 - Default (warning: not connected on D1 per default)
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH4 - Default (warning: not connected on D0 per default)
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH1 - Default
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH2 - Default
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH1N - GPIO_PartialRemap_TIM1
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH1 - Default
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH2 - Default
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH3 - Default
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH4 - Default
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH1_ETR - GPIO_FullRemap_TIM2
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH3 - Default
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH2N - GPIO_PartialRemap_TIM1
- {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH4 - Default
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH3N - GPIO_PartialRemap_TIM1
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH2 - GPIO_FullRemap_TIM2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 7)}, // TIM3_CH1 - GPIO_PartialRemap_TIM3
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 7)}, // TIM3_CH2 - GPIO_PartialRemap_TIM3
-// {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH1 - Default (used by ticker)
-// {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH2 - Default (used by ticker)
-// {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH3 - Default (used by ticker)
-// {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH4 - Default (used by ticker)
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH3 - GPIO_FullRemap_TIM2
- {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH4 - GPIO_FullRemap_TIM2
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH1N - Default
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH2N - Default
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH3N - Default
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH1 - GPIO_FullRemap_TIM3
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH2 - GPIO_FullRemap_TIM3
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH3 - GPIO_FullRemap_TIM3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH4 - GPIO_FullRemap_TIM3
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_NUCLEO_F103RB/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,180 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f3xx_hal_gpio.h and stm32f3xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_NUCLEO_F103RB/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_NUCLEO_F103RB/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/TARGET_NUCLEO_F103RB/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,105 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/analogin_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,175 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- RCC_PeriphCLKInitTypeDef PeriphClkInit;
-
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __HAL_RCC_ADC1_CLK_ENABLE();
-
- // Configure ADC clock prescaler
- // Caution: On STM32F1, ADC clock frequency max is 14 MHz (refer to device datasheet).
- // Therefore, ADC clock prescaler must be configured in function
- // of ADC clock source frequency to remain below this maximum frequency.
- // with 8 MHz external xtal: PCLK2 = 72 MHz --> ADC clock = 72/6 = 12 MHz
- // with internal clock : PCLK2 = 64 MHz --> ADC clock = 64/6 = 10.67 MHz
- PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
- PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
- HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- HAL_ADC_Init(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
-
- switch (obj->pin) {
- case PA_0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case PA_1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case PA_2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case PA_3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case PA_4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case PA_5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case PA_6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case PA_7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case PB_0:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case PB_1:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case PC_0:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case PC_1:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case PC_2:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case PC_3:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case PC_4:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case PC_5:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/gpio_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC) {
- return;
- }
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/gpio_irq_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,332 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
-#define CHANNEL_NUM (7)
-
-// Max pins for one line (max with EXTI10_15)
-#define MAX_PIN_LINE (6)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0
- 0, // pin 0
- // EXTI1
- 0, // pin 1
- // EXTI2
- 0, // pin 2
- // EXTI3
- 0, // pin 3
- // EXTI4
- 0, // pin 4
- // EXTI5_9
- 0, // pin 5
- 1, // pin 6
- 2, // pin 7
- 3, // pin 8
- 4, // pin 9
- // EXTI10_15
- 0, // pin 10
- 1, // pin 11
- 2, // pin 12
- 3, // pin 13
- 4, // pin 14
- 5 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 1);
-}
-
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 1);
-}
-
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 1);
-}
-
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3, 1);
-}
-
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4, 1);
-}
-
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5, 5);
-}
-
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6, 6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/gpio_object.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/i2c_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,459 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- static int i2c1_inited = 0;
- static int i2c2_inited = 0;
-
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Check if I2C peripherals are already configured
- if ((obj->i2c == I2C_1) && i2c1_inited) return;
- if ((obj->i2c == I2C_2) && i2c2_inited) return;
-
- // Set I2C clock
- if (obj->i2c == I2C_1) {
- i2c1_inited = 1;
- __I2C1_CLK_ENABLE();
- }
-
- if (obj->i2c == I2C_2) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- }
-
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-
- // I2C master by default
- obj->slave = 0;
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz != 0) && (hz <= 400000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // I2C configuration
- I2cHandle.Init.ClockSpeed = hz;
- I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- HAL_I2C_Init(&I2cHandle);
-
- if (obj->slave) {
- // Enable Address Acknowledge
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR1 |= I2C_CR1_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR1 |= I2C_CR1_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- // Generate start condition
- i2c_start(obj);
-
- // Send address for read
- i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Read all bytes except last one
- for (count = 0; count < (length - 1); count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // If not repeated start, send stop.
- // Warning: must be done BEFORE the data is read.
- if (stop) {
- i2c_stop(obj);
- }
-
- // Read the last byte
- value = i2c_byte_read(obj, 1);
- data[count] = (char)value;
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- // Generate start condition
- i2c_start(obj);
-
- // Send address for write
- i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Write all bytes
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return -1;
- }
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- if (last) {
- // Don't acknowledge the last byte
- i2c->CR1 &= ~I2C_CR1_ACK;
- } else {
- // Acknowledge the byte
- i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->DR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- i2c->DR = (uint8_t)data;
-
- // Wait until the byte is transmitted
- timeout = FLAG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
- (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // Wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
-
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- if (enable_slave) {
- obj->slave = 1;
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1) {
- retValue = ReadAddressed;
- } else {
- retValue = WriteAddressed;
- }
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- // Wait until RXNE flag is set
- // Wait until the byte is received
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- // Read data
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- // Read data
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
- }
- }
-
- // Wait until STOP flag is set
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- // Clear STOP flag
- __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
-
- // Wait until BUSY flag is reset
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- // Wait until TXE flag is set
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- // Write data
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- // Write data to DR
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
- }
- }
-
- // Wait until AF flag is set
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- // Clear AF flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Wait until BUSY flag is reset
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/mbed_overrides.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/pinmap.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,211 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-// Warning: the elements order must be the same as the one defined in PinNames.h
-static const uint32_t gpio_mode[13] = {
- GPIO_MODE_INPUT, // 0 = STM_MODE_INPUT
- GPIO_MODE_OUTPUT_PP, // 1 = STM_MODE_OUTPUT_PP
- GPIO_MODE_OUTPUT_OD, // 2 = STM_MODE_OUTPUT_OD
- GPIO_MODE_AF_PP, // 3 = STM_MODE_AF_PP
- GPIO_MODE_AF_OD, // 4 = STM_MODE_AF_OD
- GPIO_MODE_ANALOG, // 5 = STM_MODE_ANALOG
- GPIO_MODE_IT_RISING, // 6 = STM_MODE_IT_RISING
- GPIO_MODE_IT_FALLING, // 7 = STM_MODE_IT_FALLING
- GPIO_MODE_IT_RISING_FALLING, // 8 = STM_MODE_IT_RISING_FALLING
- GPIO_MODE_EVT_RISING, // 9 = STM_MODE_EVT_RISING
- GPIO_MODE_EVT_FALLING, // 10 = STM_MODE_EVT_FALLING
- GPIO_MODE_EVT_RISING_FALLING, // 11 = STM_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = STM_MODE_IT_EVT_RESET (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (input, output, alternate function or analog) + output speed + AF
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Enable AFIO clock
- __HAL_RCC_AFIO_CLK_ENABLE();
-
- // Configure Alternate Function
- // Warning: Must be done before the GPIO is initialized
- if (afnum > 0) {
- switch (afnum) {
- case 1: // Remap SPI1
- __HAL_AFIO_REMAP_SPI1_ENABLE();
- break;
- case 2: // Remap I2C1
- __HAL_AFIO_REMAP_I2C1_ENABLE();
- break;
- case 3: // Remap USART1
- __HAL_AFIO_REMAP_USART1_ENABLE();
- break;
- case 4: // Remap USART2
- __HAL_AFIO_REMAP_USART2_ENABLE();
- break;
- case 5: // Partial Remap USART3
- __HAL_AFIO_REMAP_USART3_PARTIAL();
- break;
- case 6: // Partial Remap TIM1
- __HAL_AFIO_REMAP_TIM1_PARTIAL();
- break;
- case 7: // Partial Remap TIM3
- __HAL_AFIO_REMAP_TIM3_PARTIAL();
- break;
- case 8: // Full Remap TIM2
- __HAL_AFIO_REMAP_TIM2_ENABLE();
- break;
- case 9: // Full Remap TIM3
- __HAL_AFIO_REMAP_TIM3_ENABLE();
- break;
- default:
- break;
- }
- }
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- if ((pin == PA_13) || (pin == PA_14)) {
- __HAL_AFIO_REMAP_SWJ_DISABLE(); // JTAG-DP Disabled and SW-DP Disabled
- }
- if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- __HAL_AFIO_REMAP_SWJ_NOJTAG(); // JTAG-DP Disabled and SW-DP enabled
- }
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure open-drain and pull-up/down
- switch (mode) {
- case PullNone:
- break;
- case PullUp:
- case PullDown:
- // Set pull-up / pull-down for Input mode
- if (pin_index < 8) {
- if ((gpio->CRL & (0x03 << (pin_index * 4))) == 0) { // MODE bits = Input mode
- gpio->CRL |= (0x08 << (pin_index * 4)); // Set pull-up / pull-down
- gpio->CRL &= ~(0x08 << ((pin_index * 4)-1)); // ENSURES GPIOx_CRL.CNFx.bit0 = 0
- }
- } else {
- if ((gpio->CRH & (0x03 << ((pin_index % 8) * 4))) == 0) { // MODE bits = Input mode
- gpio->CRH |= (0x08 << ((pin_index % 8) * 4)); // Set pull-up / pull-down
- gpio->CRH &= ~(0x08 << (((pin_index % 8) * 4)-1)); // ENSURES GPIOx_CRH.CNFx.bit0 = 0
- }
- }
- // Now it's time to setup properly if pullup or pulldown. This is done in ODR register:
- // set pull-up => bit=1, set pull-down => bit = 0
- if (mode == PullUp) {
- gpio->ODR |= (0x01 << (pin_index)); // Set pull-up
- } else{
- gpio->ODR &= ~(0x01 << (pin_index)); // Set pull-down
- }
- break;
- case OpenDrain:
- // Set open-drain for Output mode (General Purpose or Alternate Function)
- if (pin_index < 8) {
- if ((gpio->CRL & (0x03 << (pin_index * 4))) > 0) { // MODE bits = Output mode
- gpio->CRL |= (0x04 << (pin_index * 4)); // Set open-drain
- }
- } else {
- if ((gpio->CRH & (0x03 << ((pin_index % 8) * 4))) > 0) { // MODE bits = Output mode
- gpio->CRH |= (0x04 << ((pin_index % 8) * 4)); // Set open-drain
- }
- }
- break;
- default:
- break;
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/port_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/pwmout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,227 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
-
- if (obj->pwm == (PWMName)NC) {
- error("PWM error: pinout mapping failed.");
- }
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
- int complementary_channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->pin) {
-
- // Channels 1
- case PA_6:
- case PA_8:
- case PA_15:
- case PB_4:
- case PC_6:
- channel = TIM_CHANNEL_1;
- break;
-
- // Channels 1N
- case PB_13:
- channel = TIM_CHANNEL_1;
- complementary_channel = 1;
- break;
-
- // Channels 2
- case PA_1:
- case PA_7:
- case PA_9:
- case PB_3:
- case PB_5:
- case PC_7:
- channel = TIM_CHANNEL_2;
- break;
-
- // Channels 2N
- case PB_14:
- channel = TIM_CHANNEL_2;
- complementary_channel = 1;
- break;
-
- // Channels 3
- case PA_2:
- case PA_10:
- case PB_0:
- case PB_10:
- case PC_8:
- channel = TIM_CHANNEL_3;
- break;
-
- // Channels 3N
- case PB_15:
- channel = TIM_CHANNEL_3;
- complementary_channel = 1;
- break;
-
- // Channels 4
- case PA_3:
- case PA_11:
- case PB_1:
- case PB_11:
- case PC_9:
- channel = TIM_CHANNEL_4;
- break;
-
- default:
- return;
- }
-
- HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel);
-
- if (complementary_channel) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- HAL_TIM_PWM_Init(&TimHandle);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/rtc_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,189 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __HAL_RCC_PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.AsynchPrediv = RTC_AUTO_1_SECOND;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/serial_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,345 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (3)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable UART clock
- if (obj->uart == UART_1) {
- __HAL_RCC_USART1_CLK_ENABLE();
- obj->index = 0;
- }
- if (obj->uart == UART_2) {
- __HAL_RCC_USART2_CLK_ENABLE();
- obj->index = 1;
- }
- if (obj->uart == UART_3) {
- __HAL_RCC_USART3_CLK_ENABLE();
- obj->index = 2;
- }
-
- // Configure UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
- if (obj->uart == UART_3) {
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart3_irq(void)
-{
- uart_irq(UART_3, 2);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_3) {
- irq_n = USART3_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- if (obj->databits == UART_WORDLENGTH_8B) {
- return (int)(uart->DR & (uint8_t)0xFF);
- } else {
- return (int)(uart->DR & (uint16_t)0x1FF);
- }
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- if (obj->databits == UART_WORDLENGTH_8B) {
- uart->DR = (uint8_t)(c & (uint8_t)0xFF);
- } else {
- uart->DR = (uint16_t)(c & (uint16_t)0x1FF);
- }
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/sleep.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,62 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-#include "hal_tick.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM_MST;
-
- // Disable HAL tick and us_ticker update interrupts
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick and us_ticker update interrupts
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/spi_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,316 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel != NC) {
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- } else {
- obj->nss = SPI_NSS_SOFT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (obj->nss != SPI_NSS_SOFT) {
- obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
- }
-
- obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- if (obj->spi == SPI_1) {
- // Values depend of PCLK2: 64 MHz if HSI is used, 72 MHz if HSE is used
- if (hz < 500000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 250 kHz - 281 kHz
- } else if ((hz >= 500000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 500 kHz - 563 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1 MHz - 1.13 MHz
- } else if ((hz >= 2000000) && (hz < 4000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2 MHz - 2.25 MHz
- } else if ((hz >= 4000000) && (hz < 8000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 4 MHz - 4.5 MHz
- } else if ((hz >= 8000000) && (hz < 16000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 8 MHz - 9 MHz
- } else if ((hz >= 16000000) && (hz < 32000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 16 MHz - 18 MHz
- } else { // >= 32000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 32 MHz - 36 MHz
- }
- }
-
- if (obj->spi == SPI_2) {
- // Values depend of PCLK1: 32 MHz if HSI is used, 36 MHz if HSE is used
- if (hz < 250000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 125 kHz - 141 kHz
- } else if ((hz >= 250000) && (hz < 500000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 250 kHz - 281 kHz
- } else if ((hz >= 500000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 500 kHz - 563 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1 MHz - 1.13 MHz
- } else if ((hz >= 2000000) && (hz < 4000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 2 MHz - 2.25 MHz
- } else if ((hz >= 4000000) && (hz < 8000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 4 MHz - 4.5 MHz
- } else if ((hz >= 8000000) && (hz < 16000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 8 MHz - 9 MHz
- } else { // >= 16000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 16 MHz - 18 MHz
- }
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F1/us_ticker.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-// Timer selection
-#define TIM_MST TIM4
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-volatile uint32_t SlaveCounter = 0;
-volatile uint32_t oc_int_part = 0;
-volatile uint16_t oc_rem_part = 0;
-
-void set_compare(uint16_t count)
-{
- TimMasterHandle.Instance = TIM_MST;
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- uint32_t counter, counter2;
- if (!us_ticker_inited) us_ticker_init();
- // A situation might appear when Master overflows right after Slave is read and before the
- // new (overflowed) value of Master is read. Which would make the code below consider the
- // previous (incorrect) value of Slave and the new value of Master, which would return a
- // value in the past. Avoid this by computing consecutive values of the timer until they
- // are properly ordered.
- counter = (uint32_t)(SlaveCounter << 16);
- counter += TIM_MST->CNT;
- while (1) {
- counter2 = (uint32_t)(SlaveCounter << 16);
- counter2 += TIM_MST->CNT;
- if (counter2 > counter) {
- break;
- }
- counter = counter2;
- }
- return counter2;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- int delta = (int)((uint32_t)timestamp - us_ticker_read());
- uint16_t cval = TIM_MST->CNT;
-
- if (delta <= 0) { // This event was in the past
- us_ticker_irq_handler();
- } else {
- oc_int_part = (uint32_t)(delta >> 16);
- oc_rem_part = (uint16_t)(delta & 0xFFFF);
- if (oc_rem_part <= (0xFFFF - cval)) {
- set_compare(cval + oc_rem_part);
- oc_rem_part = 0;
- } else {
- set_compare(0xFFFF);
- oc_rem_part = oc_rem_part - (0xFFFF - cval);
- }
- }
-}
-
-void us_ticker_disable_interrupt(void)
-{
- TimMasterHandle.Instance = TIM_MST;
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- TimMasterHandle.Instance = TIM_MST;
- if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) {
- __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1);
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/PeripheralPins.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,88 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE,
- ADC_4 = (int)ADC4_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,270 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
- {PA_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
- {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
- {PA_7, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
-
- {PB_0, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
- {PB_1, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PB_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
- {PB_11, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PB_13, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
-
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
- {PC_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
-
- {PF_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PF_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PA_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PA_14, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PA_15, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PF_6, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- /*
- * The lines below show all combinations to conect a port pin with a timer. Commented
- * lines are alternative possibilities not used per default. But they can be changed
- * manually instead of the suggested configuration. For example you can see that on
- * PA_5 you can have a PWM using either Timer2/Channel1 or Timer8/Channel1N. Today I
- * have decided to use Timer2/Channel1. But you can also notice that Timer2/Channel1
- * is also used on PA_0. That means that today you cannot output two different PWM
- * signals on PA_0 and PA_5 at the same time. If someone wants this, he will need to
- * change the timer that is used on PA_5. This is why the other possibilities are
- * commented to make this change easier without looking deeply into the mcu datasheet.
- */
- {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1
- {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2
- {PA_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
- //{PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2
-// {PA_9, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4
-// {PA_11, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 1, 0)}, // TIM4_CH1
-// {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PA_12, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PA_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
-// {PA_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 2, 0)}, // TIM4_CH2
- {PA_13, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
-// {PA_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PA_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 2, 0)}, // TIM8_CH2
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- //{PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N
- //{PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
- //{PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N
- //{PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N
- {PB_4, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
- //{PB_4, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM8, 2, 1)}, // TIM8_CH2N
- //{PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PB_5, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1
- //{PB_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- //{PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
- //{PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
- //{PB_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 1, 0)}, // TIM8_CH1
- {PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
- //{PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- //{PB_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4
- {PB_8, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
- //{PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
- //{PB_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 2, 0)}, // TIM8_CH2
- {PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
- //{PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
- //{PB_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 3, 0)}, // TIM8_CH3
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N
-// {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N
-
- //{PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 0)}, // TIM8_CH1
- //{PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 0)}, // TIM8_CH2
- //{PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 0)}, // TIM8_CH3
- //{PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 4, 0)}, // TIM8_CH4
- {PC_10, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N
- {PC_11, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N
- {PC_12, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N
- {PC_13, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 4, 1)}, // TIM8_CH4N
-
- {PD_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 4, 0)}, // TIM8_CH4
- {PD_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
- {PD_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PD_14, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
- {PD_15, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-
- {PE_0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM16, 1, 0)}, // TIM16_CH1
- {PE_1, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM17, 1, 0)}, // TIM17_CH1
- {PE_2, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PE_3, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PE_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PE_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
- {PE_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
- {PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
- {PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
- {PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
- {PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
- {PE_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
-
- {PF_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- //{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- //{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- //{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PF_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PF_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- //{PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- //{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PD_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,246 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7) |\
- ((CHANNEL & 0x0F) << 11) |\
- ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PB_15,
- D12 = PB_14,
- D13 = PB_13,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PE_9,
- LED2 = PE_8,
- LED3 = PE_9,
- LED4 = PE_8,
- LED5 = PE_10,
- LED6 = PE_15,
- LED7 = PE_11,
- LED8 = PE_14,
- LED9 = PE_12,
- LED10 = PE_13,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PB_15,
- SPI_MISO = PB_14,
- SPI_SCK = PB_13,
- SPI_CS = PB_6,
- PWM_OUT = PB_4,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F303VC/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint32_t channel;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
- uint32_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint32_t channel;
- uint32_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,80 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC1_BASE,
- DAC_2 = (int)DAC2_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE
-} UARTName;
-
-#define STDIO_UART_TX PB_3
-#define STDIO_UART_RX PB_4
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,195 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
- {PA_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
- {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
- {PA_7, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
-
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PB_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
- {PB_12, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
- {PB_13, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PB_14, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
- {PB_15, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
-
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
- {PA_6, DAC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC2_OUT1
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PA_14, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_15, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N
-// {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
- {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1
-// {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2
- {PA_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2
-// {PA_9, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3
-// {PA_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4
- {PA_12, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PA_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PA_13, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
-// {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 --> USED BY TIMER
- {PB_4, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_5, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1
- {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
-// {PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
- {PB_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4
- {PB_8, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
-// {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 --> USED BY TIMER
-// {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N
-// {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N
-
- {PF_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {NC, NC, 0}
-};
-
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,181 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7) |\
- ((CHANNEL & 0x0F) << 11) |\
- ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- // Note: The Arduino connector is not present on this board.
- // We keep these definitions for compatibility with Nucleo code examples.
- // A0 = PA_0,
- // A1 = PA_1,
- // A2 = PA_4,
- // A3 = PB_0,
- // A4 = PC_1,
- // A5 = PC_0,
- // D0 = PA_3,
- // D1 = PA_2,
- // D2 = PA_10,
- // D3 = PB_3,
- // D4 = PB_5,
- // D5 = PB_4,
- // D6 = PB_10,
- // D7 = PA_8,
- // D8 = PA_9,
- // D9 = PC_7,
- // D10 = PB_6,
- // D11 = PA_7,
- // D12 = PA_6,
- // D13 = PA_5,
- // D14 = PB_9,
- // D15 = PB_8,
-
- // Generic signals namings
- LED1 = PB_6,
- LED2 = PB_7,
- LED3 = PB_8,
- LED4 = PB_9,
- USER_BUTTON = PA_0,
- SERIAL_TX = PB_3,
- SERIAL_RX = PB_4,
- USBTX = PB_3,
- USBRX = PB_4,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PA_4,
- PWM_OUT = PB_6,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_DISCO_F334C8/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint32_t channel;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
- uint32_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint32_t channel;
- uint32_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,80 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,206 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - ARDUINO A0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - ARDUINO A1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 - ARDUINO A2
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
-
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 - ARDUINO A3
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PB_11, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PB_13, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
-
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - ARDUINO A5
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 - ARDUINO A4
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PA_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PA_14, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_5, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)},
- {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)},
- {PA_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PA_15, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1
- {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2
-// {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
- {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - ARDUINO
-// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2
-// {PA_9, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3
-// {PA_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4
-// {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PA_12, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PA_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PA_13, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
-// {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO --> USED BY TIMER
- {PB_4, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - ARDUINO
- {PB_5, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)},// TIM17_CH1
- {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - ARDUINO
- {PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
-// {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO --> USED BY TIMER
-// {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N
-// {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
- {PC_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
- {PC_2, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
- {PC_3, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
- {PC_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N
-
- {PF_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_5, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_11, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PF_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PF_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,194 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7) |\
- ((CHANNEL & 0x0F) << 11) |\
- ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PB_15,
- D12 = PB_14,
- D13 = PB_13,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PB_13,
- LED2 = PB_13,
- LED3 = PB_13,
- LED4 = PB_13,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PB_15,
- SPI_MISO = PB_14,
- SPI_SCK = PB_13,
- SPI_CS = PB_6,
- PWM_OUT = PB_4,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint32_t channel;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
- uint32_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint32_t channel;
- uint32_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303RE/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,89 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE,
- ADC_4 = (int)ADC4_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303RE/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,257 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - ARDUINO A0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - ARDUINO A1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 - ARDUINO A2
- {PA_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 - Warning: LED1 is also connected to this pin
- {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
- {PA_7, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
-
- {PB_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
- {PB_11, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC12_IN14
-
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC12_IN6 - ARDUINO A5
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC12_IN7 - ARDUINO A4
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC12_IN8
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC12_IN9
- {PC_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
- {PC_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - Warning: LED1 is connected on this pin
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PA_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PA_14, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_5, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)},
- {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)},
- {PA_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PA_15, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1
- {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2
- {PA_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - Warning: LED1 is connected on this pin
- {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N
-// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2
-// {PA_9, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3
-// {PA_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4
-// {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
-// {PA_11, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 1, 0)}, // TIM4_CH1
- {PA_12, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PA_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
-// {PA_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 2, 0)}, // TIM4_CH2
- {PA_13, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
-// {PA_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 3, 0)}, // TIM4_CH3
- {PA_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 2, 0)}, // TIM8_CH2
-// {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8, 1, 0)}, // TIM8_CH1
-
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO --> USED BY TIMER
- {PB_3, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N - ARDUINO
- {PB_4, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - ARDUINO
-// {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PB_4, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N
-// {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PB_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- {PB_5, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)},// TIM17_CH1
- {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - ARDUINO
-// {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
-// {PB_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 1, 0)}, // TIM8_CH1
- {PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
-// {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
-// {PB_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4
- {PB_8, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 2, 0)}, // TIM8_CH2
- {PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
-// {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 3, 0)}, // TIM8_CH3
-// {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO --> USED BY TIMER
-// {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N
-// {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
- {PC_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
- {PC_2, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
- {PC_3, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 0)}, // TIM8_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 0)}, // TIM8_CH2
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 0)}, // TIM8_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 4, 0)}, // TIM8_CH4
- {PC_10, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N
- {PC_11, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N
- {PC_12, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N
- {PC_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N
-
- {PF_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
-// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_5, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
-// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_11, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Warning: LED1 is connected on this pin
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PF_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
-// {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
-// {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PF_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303RE/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,194 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7) |\
- ((CHANNEL & 0x0F) << 11) |\
- ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_4,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303RE/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303RE/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F303RE/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint32_t channel;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
- uint32_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint32_t channel;
- uint32_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,80 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC1_BASE,
- DAC_2 = (int)DAC2_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,212 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - ARDUINO A0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - ARDUINO A1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 - ARDUINO A2
- {PA_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
- {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
- {PA_7, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
-
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 - ARDUINO A3
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PB_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
- {PB_12, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
- {PB_13, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PB_14, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
- {PB_15, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
-
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - ARDUINO A5
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 - ARDUINO A4
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
- {PC_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2 (Warning: LED1 is also on this pin)
- {PA_6, DAC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC2_OUT1
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PA_14, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_15, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM2 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
-// {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N
-// {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
- {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1
-// {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2
- {PA_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
-// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2
-// {PA_9, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3
-// {PA_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4
- {PA_12, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
-// {PA_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PA_13, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
-// {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO --> USED BY TIMER
- {PB_4, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - ARDUINO
-// {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
-// {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_5, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1
- {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - ARDUINO
-// {PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
- {PB_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4
- {PB_8, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
-// {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO --> USED BY TIMER
-// {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N
-// {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
- {PC_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
- {PC_2, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
- {PC_3, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PC_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N
-
- {PF_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_5, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,194 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7) |\
- ((CHANNEL & 0x0F) << 11) |\
- ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_4,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F334R8/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint32_t channel;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
- uint32_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint32_t channel;
- uint32_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/analogin_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,222 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
-#if defined(ADC1)
- static int adc1_inited = 0;
-#endif
-#if defined(ADC2)
- static int adc2_inited = 0;
-#endif
-#if defined(ADC3)
- static int adc3_inited = 0;
-#endif
-#if defined(ADC4)
- static int adc4_inited = 0;
-#endif
-
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Get the pin function and assign the used channel to the object
- uint32_t function = pinmap_function(pin, PinMap_ADC);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // Check if ADC is already initialized
- // Enable ADC clock
-#if defined(ADC1)
- if ((obj->adc == ADC_1) && adc1_inited) return;
- if (obj->adc == ADC_1) {
- __ADC1_CLK_ENABLE();
- adc1_inited = 1;
- }
-#endif
-#if defined(ADC2)
- if ((obj->adc == ADC_2) && adc2_inited) return;
- if (obj->adc == ADC_2) {
- __ADC2_CLK_ENABLE();
- adc2_inited = 1;
- }
-#endif
-#if defined(ADC3)
- if ((obj->adc == ADC_3) && adc3_inited) return;
- if (obj->adc == ADC_3) {
- __ADC34_CLK_ENABLE();
- adc3_inited = 1;
- }
-#endif
-#if defined(ADC4)
- if ((obj->adc == ADC_4) && adc4_inited) return;
- if (obj->adc == ADC_4) {
- __ADC34_CLK_ENABLE();
- adc4_inited = 1;
- }
-#endif
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.EOCSelection = EOC_SINGLE_CONV;
- AdcHandle.Init.LowPowerAutoWait = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.Overrun = OVR_DATA_OVERWRITTEN;
-
- if (HAL_ADC_Init(&AdcHandle) != HAL_OK) {
- error("Cannot initialize ADC");
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig = {0};
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = ADC_REGULAR_RANK_1;
- sConfig.SamplingTime = ADC_SAMPLETIME_19CYCLES_5;
- sConfig.SingleDiff = ADC_SINGLE_ENDED;
- sConfig.OffsetNumber = ADC_OFFSET_NONE;
- sConfig.Offset = 0;
-
- switch (obj->channel) {
- case 1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case 2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case 3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case 4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case 5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case 6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case 7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case 8:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case 9:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case 10:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case 11:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case 12:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case 13:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case 14:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case 15:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- case 16:
- sConfig.Channel = ADC_CHANNEL_16;
- break;
- case 17:
- sConfig.Channel = ADC_CHANNEL_17;
- break;
- case 18:
- sConfig.Channel = ADC_CHANNEL_18;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/analogout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,182 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-#define DAC_RANGE (0xFFF) // 12 bits
-
-static DAC_HandleTypeDef DacHandle;
-
-// These variables are used for the "free" function
-static int pa4_used = 0;
-static int pa5_used = 0;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- DAC_ChannelConfTypeDef sConfig;
-
- // Get the peripheral name from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
- MBED_ASSERT(obj->dac != (DACName)NC);
-
- // Get the pin function and assign the used channel to the object
- uint32_t function = pinmap_function(pin, PinMap_DAC);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the pin for future use
- obj->pin = pin;
-
- // Enable DAC clock
- if (obj->dac == DAC_1) {
- __DAC1_CLK_ENABLE();
- }
-#if defined(DAC2)
- if (obj->dac == DAC_2) {
- __DAC2_CLK_ENABLE();
- }
-#endif
-
- // Configure DAC
- DacHandle.Instance = (DAC_TypeDef *)(obj->dac);
-
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
-
- if (pin == PA_4) {
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
- pa4_used = 1;
- }
-
-#if defined(DAC_CHANNEL_2)
- if (pin == PA_5) {
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2);
- pa5_used = 1;
- }
-#endif
-
- if (pin == PA_6) {
- HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
- }
-
- analogout_write_u16(obj, 0);
-}
-
-void analogout_free(dac_t *obj)
-{
- // Reset DAC and disable clock
- if (obj->pin == PA_4) pa4_used = 0;
- if (obj->pin == PA_5) pa5_used = 0;
-
- if ((pa4_used == 0) && (pa5_used == 0)) {
- __DAC1_FORCE_RESET();
- __DAC1_RELEASE_RESET();
- __DAC1_CLK_DISABLE();
- }
-
-#if defined(DAC2)
- if (obj->pin == PA_6) {
- __DAC2_FORCE_RESET();
- __DAC2_RELEASE_RESET();
- __DAC2_CLK_DISABLE();
- }
-#endif
-
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- if (obj->channel == 1) {
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_1);
- }
-#if defined(DAC_CHANNEL_2)
- if (obj->channel == 2) {
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_2);
- }
-#endif
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->channel == 1) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- }
-#if defined(DAC_CHANNEL_2)
- if (obj->channel == 2) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
-#endif
- return 0;
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)DAC_RANGE));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)DAC_RANGE) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, value);
- }
-}
-
-float analogout_read(dac_t *obj)
-{
- uint32_t value = dac_read(obj);
- return (float)((float)value * (1.0f / (float)DAC_RANGE));
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/gpio_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC) {
- return;
- }
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRRL;
- obj->reg_clr = &gpio->BSRRH;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/gpio_irq_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,332 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
-#define CHANNEL_NUM (7)
-
-// Max pins for one line (max with EXTI10_15)
-#define MAX_PIN_LINE (6)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0
- 0, // pin 0
- // EXTI1
- 0, // pin 1
- // EXTI2
- 0, // pin 2
- // EXTI3
- 0, // pin 3
- // EXTI4
- 0, // pin 4
- // EXTI5_9
- 0, // pin 5
- 1, // pin 6
- 2, // pin 7
- 3, // pin 8
- 4, // pin 9
- // EXTI10_15
- 0, // pin 10
- 1, // pin 11
- 2, // pin 12
- 3, // pin 13
- 4, // pin 14
- 5 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 1);
-}
-
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 1);
-}
-
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 1);
-}
-
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3, 1);
-}
-
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4, 1);
-}
-
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5, 5);
-}
-
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6, 6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_TSC_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/gpio_object.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,76 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj)
-{
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/i2c_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,450 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x4000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-int i2c3_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
- __I2C1_CLK_ENABLE();
- // Configure I2C1 pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
-#if defined(I2C2_BASE)
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C2 pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-#endif
-
-#if defined(I2C3_BASE)
- if ((obj->i2c == I2C_3) && !i2c3_inited) {
- i2c3_inited = 1;
- __I2C3_CLK_ENABLE();
- // Configure I2C3 pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-#endif
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- uint32_t tim = 0;
-
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
-
- /*
- Values calculated with I2C_Timing_Configuration_V1.0.1.xls file (see AN4235)
- * Standard mode (up to 100 kHz)
- * Fast Mode (up to 400 kHz)
- * Fast Mode Plus (up to 1 MHz)
- Below values obtained with:
- - I2C clock source = 64 MHz (System Clock w/ HSI) or 72 (System Clock w/ HSE)
- - Analog filter delay = ON
- - Digital filter coefficient = 0
- */
- if (SystemCoreClock == 64000000) {
- switch (hz) {
- case 100000:
- tim = 0x10B17DB4; // Standard mode with Rise time = 120ns, Fall time = 120ns
- break;
- case 400000:
- tim = 0x00E22163; // Fast Mode with Rise time = 120ns, Fall time = 120ns
- break;
- case 1000000:
- tim = 0x00A00D1E; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
- break;
- default:
- break;
- }
- } else if (SystemCoreClock == 72000000) {
- switch (hz) {
- case 100000:
- tim = 0x10D28DCB; // Standard mode with Rise time = 120ns, Fall time = 120ns
- break;
- case 400000:
- tim = 0x00F32571; // Fast Mode with Rise time = 120ns, Fall time = 120ns
- break;
- case 1000000:
- tim = 0x00C00D24; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
- break;
- default:
- break;
- }
- }
-
- // Enable the Fast Mode Plus capability
- if (hz == 1000000) {
- if (obj->i2c == I2C_1) {
- __HAL_SYSCFG_FASTMODEPLUS_ENABLE(HAL_SYSCFG_FASTMODEPLUS_I2C1);
- }
-#if defined(I2C2_BASE)
- if (obj->i2c == I2C_2) {
- __HAL_SYSCFG_FASTMODEPLUS_ENABLE(HAL_SYSCFG_FASTMODEPLUS_I2C2);
- }
-#endif
-#if defined(I2C3_BASE)
- if (obj->i2c == I2C_3) {
- __HAL_SYSCFG_FASTMODEPLUS_ENABLE(HAL_SYSCFG_FASTMODEPLUS_I2C3);
- }
-#endif
- }
-
- // I2C configuration
- I2cHandle.Init.Timing = tim;
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
- HAL_I2C_Init(&I2cHandle);
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- /* update CR2 register */
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = LONG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- /* Wait until STOPF flag is set */
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- /* Clear STOP Flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- /* update CR2 register */
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- /* Wait until STOPF flag is set */
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- /* Clear STOP Flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
-
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- char size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- char size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/mbed_overrides.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/pinmap.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,145 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-// Warning: the elements order must be the same as the one defined in PinNames.h
-static const uint32_t gpio_mode[13] = {
- GPIO_MODE_INPUT, // 0 = STM_MODE_INPUT
- GPIO_MODE_OUTPUT_PP, // 1 = STM_MODE_OUTPUT_PP
- GPIO_MODE_OUTPUT_OD, // 2 = STM_MODE_OUTPUT_OD
- GPIO_MODE_AF_PP, // 3 = STM_MODE_AF_PP
- GPIO_MODE_AF_OD, // 4 = STM_MODE_AF_OD
- GPIO_MODE_ANALOG, // 5 = STM_MODE_ANALOG
- GPIO_MODE_IT_RISING, // 6 = STM_MODE_IT_RISING
- GPIO_MODE_IT_FALLING, // 7 = STM_MODE_IT_FALLING
- GPIO_MODE_IT_RISING_FALLING, // 8 = STM_MODE_IT_RISING_FALLING
- GPIO_MODE_EVT_RISING, // 9 = STM_MODE_EVT_RISING
- GPIO_MODE_EVT_FALLING, // 10 = STM_MODE_EVT_FALLING
- GPIO_MODE_EVT_RISING_FALLING, // 11 = STM_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = STM_MODE_IT_EVT_RESET (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
-#if defined(GPIOE_BASE)
- case PortE:
- gpio_add = GPIOE_BASE;
- __GPIOE_CLK_ENABLE();
- break;
-#endif
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2) {
- pupd = 0; // Open-drain = No pull-up/No pull-down
- }
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/port_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/pwmout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,198 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
- MBED_ASSERT(obj->pwm != (PWMName)NC);
-
- // Get the pin function and assign the used channel to the object
- uint32_t function = pinmap_function(pin, PinMap_PWM);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
- obj->inverted = STM_PIN_INVERTED(function);
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
-#if defined(TIM3)
- if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
-#endif
-#if defined(TIM8)
- if (obj->pwm == PWM_8) __TIM8_CLK_ENABLE();
-#endif
- if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
- if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
- if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->channel) {
- case 1:
- channel = TIM_CHANNEL_1;
- break;
- case 2:
- channel = TIM_CHANNEL_2;
- break;
- case 3:
- channel = TIM_CHANNEL_3;
- break;
- case 4:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- if (HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel) != HAL_OK) {
- error("Cannot initialize PWM");
- }
-
- if (obj->inverted) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Update the SystemCoreClock variable
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
-
- if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
- error("Cannot initialize PWM");
- }
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/rtc_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,201 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // Note: The LSI clock can be measured precisely using a timer input capture.
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/serial_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,408 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (5)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- // Disable the reception overrun detection
- UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
- UartHandle.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
-
- HAL_UART_Init(&UartHandle);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock + switch to SystemClock
- if (obj->uart == UART_1) {
- __USART1_CLK_ENABLE();
- __HAL_RCC_USART1_CONFIG(RCC_USART1CLKSOURCE_SYSCLK);
- obj->index = 0;
- }
- if (obj->uart == UART_2) {
- __USART2_CLK_ENABLE();
- __HAL_RCC_USART2_CONFIG(RCC_USART2CLKSOURCE_SYSCLK);
- obj->index = 1;
- }
- if (obj->uart == UART_3) {
- __USART3_CLK_ENABLE();
- __HAL_RCC_USART3_CONFIG(RCC_USART3CLKSOURCE_SYSCLK);
- obj->index = 2;
- }
-#if defined(UART4_BASE)
- if (obj->uart == UART_4) {
- __UART4_CLK_ENABLE();
- __HAL_RCC_UART4_CONFIG(RCC_UART4CLKSOURCE_SYSCLK);
- obj->index = 3;
- }
-#endif
-#if defined(UART5_BASE)
- if (obj->uart == UART_5) {
- __UART5_CLK_ENABLE();
- __HAL_RCC_UART5_CONFIG(RCC_UART5CLKSOURCE_SYSCLK);
- obj->index = 4;
- }
-#endif
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- }
- if (obj->uart == UART_2) {
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- }
- if (obj->uart == UART_3) {
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- }
-#if defined(UART4_BASE)
- if (obj->uart == UART_4) {
- __UART4_FORCE_RESET();
- __UART4_RELEASE_RESET();
- __UART4_CLK_DISABLE();
- }
-#endif
-#if defined(UART5_BASE)
- if (obj->uart == UART_5) {
- __UART5_FORCE_RESET();
- __UART5_RELEASE_RESET();
- __UART5_CLK_DISABLE();
- }
-#endif
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- volatile uint32_t tmpval = UartHandle.Instance->RDR; // Clear RXNE bit
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart3_irq(void)
-{
- uart_irq(UART_3, 2);
-}
-
-#if defined(UART4_BASE)
-static void uart4_irq(void)
-{
- uart_irq(UART_4, 3);
-}
-#endif
-
-#if defined(UART5_BASE)
-static void uart5_irq(void)
-{
- uart_irq(UART_5, 4);
-}
-#endif
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_3) {
- irq_n = USART3_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-
-#if defined(UART4_BASE)
- if (obj->uart == UART_4) {
- irq_n = UART4_IRQn;
- vector = (uint32_t)&uart4_irq;
- }
-#endif
-
-#if defined(UART5_BASE)
- if (obj->uart == UART_5) {
- irq_n = UART5_IRQn;
- vector = (uint32_t)&uart5_irq;
- }
-#endif
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TCIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TC);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- if (obj->databits == UART_WORDLENGTH_8B) {
- return (int)(uart->RDR & (uint8_t)0xFF);
- } else {
- return (int)(uart->RDR & (uint16_t)0x1FF);
- }
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- if (obj->databits == UART_WORDLENGTH_8B) {
- uart->TDR = (uint8_t)(c & (uint8_t)0xFF);
- } else {
- uart->TDR = (uint16_t)(c & (uint16_t)0x1FF);
- }
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- __HAL_UART_SEND_REQ(&UartHandle, UART_RXDATA_FLUSH_REQUEST);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/sleep.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM2;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/spi_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,380 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- HAL_SPI_Init(&SpiHandle);
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
-#if defined(SPI1_BASE)
- if (obj->spi == SPI_1) {
- __SPI1_CLK_ENABLE();
- }
-#endif
-
-#if defined(SPI2_BASE)
- if (obj->spi == SPI_2) {
- __SPI2_CLK_ENABLE();
- }
-#endif
-
-#if defined(SPI3_BASE)
- if (obj->spi == SPI_3) {
- __SPI3_CLK_ENABLE();
- }
-#endif
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
-#if defined(TARGET_STM32F334C8)
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-#else
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1 MHz (HSI) or 1.13 MHz (HSE)
-#endif
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel != NC) {
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- } else {
- obj->nss = SPI_NSS_SOFT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
-#if defined(SPI1_BASE)
- if (obj->spi == SPI_1) {
- __SPI1_FORCE_RESET();
- __SPI1_RELEASE_RESET();
- __SPI1_CLK_DISABLE();
- }
-#endif
-
-#if defined(SPI2_BASE)
- if (obj->spi == SPI_2) {
- __SPI2_FORCE_RESET();
- __SPI2_RELEASE_RESET();
- __SPI2_CLK_DISABLE();
- }
-#endif
-
-#if defined(SPI3_BASE)
- if (obj->spi == SPI_3) {
- __SPI3_FORCE_RESET();
- __SPI3_RELEASE_RESET();
- __SPI3_CLK_DISABLE();
- }
-#endif
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (obj->nss != SPI_NSS_SOFT) {
- obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
- }
-
- obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
-#if defined(TARGET_STM32F334C8)
- // Values depend of APB2CLK : 64 MHz if HSI is used, 72 MHz if HSE is used
- if (hz < 500000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 250 kHz - 281 kHz
- } else if ((hz >= 500000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 500 kHz - 563 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1 MHz - 1.13 MHz
- } else if ((hz >= 2000000) && (hz < 4000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2 MHz - 2.25 MHz
- } else if ((hz >= 4000000) && (hz < 8000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 4 MHz - 4.5 MHz
- } else if ((hz >= 8000000) && (hz < 16000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 8 MHz - 9 MHz
- } else if ((hz >= 16000000) && (hz < 32000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 16 MHz - 18 MHz
- } else { // >= 32000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 32 MHz - 36 MHz
- }
-#elif defined(TARGET_STM32F302R8)
- if (hz < 250000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 125 kHz - 141 kHz
- } else if ((hz >= 250000) && (hz < 500000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 250 kHz - 280 kHz
- } else if ((hz >= 500000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 500 kHz - 560 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1 MHz - 1.13 MHz
- } else if ((hz >= 2000000) && (hz < 4000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 2 MHz - 2.25 MHz
- } else if ((hz >= 4000000) && (hz < 8000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 4 MHz - 4.5 MHz
- } else if ((hz >= 8000000) && (hz < 16000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 8 MHz - 9 MHz
- } else { // >= 16000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 16 MHz - 18 MHz
- }
-
-#else
- // Values depend of APB1CLK and APB2CLK : 32 MHz if HSI is used, 36 MHz if HSE is used
- if (obj->spi == SPI_1) {
- if (hz < 500000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 250 kHz - 280 kHz
- } else if ((hz >= 500000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 500 kHz - 560 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1 MHz - 1.13 MHz
- } else if ((hz >= 2000000) && (hz < 4000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2 MHz - 2.25 MHz
- } else if ((hz >= 4000000) && (hz < 8000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 4 MHz - 4.5 MHz
- } else if ((hz >= 8000000) && (hz < 16000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 8 MHz - 9 MHz
- } else if ((hz >= 16000000) && (hz < 32000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 16 MHz - 18 MHz
- } else { // >= 32000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 32 MHz - 36 MHz
- }
- } else {
- if (hz < 250000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 125 kHz - 141 kHz
- } else if ((hz >= 250000) && (hz < 500000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 250 kHz - 280 kHz
- } else if ((hz >= 500000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 500 kHz - 560 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1 MHz - 1.13 MHz
- } else if ((hz >= 2000000) && (hz < 4000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 2 MHz - 2.25 MHz
- } else if ((hz >= 4000000) && (hz < 8000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 4 MHz - 4.5 MHz
- } else if ((hz >= 8000000) && (hz < 16000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 8 MHz - 9 MHz
- } else { // >= 16000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 16 MHz - 18 MHz
- }
- }
-#endif
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3/us_ticker.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,70 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-// 32-bit timer selection
-#define TIM_MST TIM2
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,180 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// MODE (see GPIOMode_TypeDef structure)
-// OTYPE (see GPIOOType_TypeDef structure)
-// PUPD (see GPIOPuPd_TypeDef structure)
-// AFNUM (see AF_mapping constant table, 0xFF is not used)
-#define STM_PIN_DATA(MODE, OTYPE, PUPD, AFNUM) (((AFNUM)<<8)|((PUPD)<<4)|((OTYPE)<<2)|((MODE)<<0))
-#define STM_PIN_MODE(X) (((X)>>0) & 0x3)
-#define STM_PIN_OTYPE(X) (((X)>>2) & 0x1)
-#define STM_PIN_PUPD(X) (((X)>>4) & 0x3)
-#define STM_PIN_AFNUM(X) (((X)>>8) & 0xF)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
- LED1 = PE_9,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/analogin_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,191 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-#include "wait_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "cmsis.h"
-#include "pinmap.h"
-
-static const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN1
- {PA_1, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN2
- {PA_2, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN3
- {PA_3, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN4
- {PA_4, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN5
- {PC_0, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN6
- {PC_1, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN7
- {PC_2, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN8
- {PC_3, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN9
- {PA_6, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN10
- {PB_0, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN11
- {PB_1, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN12
- {PB_13, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN13
- {PB_11, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN14
- {PA_7, ADC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // ADC_IN15
- {NC, NC, 0}
-};
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin) {
-
- ADC_TypeDef *adc;
- ADC_InitTypeDef ADC_InitStructure;
- ADC_CommonInitTypeDef ADC_CommonInitStructure;
-
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc == (ADCName)NC);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Get ADC registers structure address
- adc = (ADC_TypeDef *)(obj->adc);
-
- // Enable ADC clock
- RCC_ADCCLKConfig(RCC_ADC12PLLCLK_Div1);
- RCC_AHBPeriphClockCmd(RCC_AHBPeriph_ADC12, ENABLE);
-
- // Calibration
- ADC_VoltageRegulatorCmd(adc, ENABLE);
- wait_us(10);
- ADC_SelectCalibrationMode(adc, ADC_CalibrationMode_Single);
- ADC_StartCalibration(adc);
- while (ADC_GetCalibrationStatus(adc) != RESET) {}
-
- // Configure ADC
- ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
- ADC_CommonInitStructure.ADC_Clock = ADC_Clock_AsynClkMode;
- ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
- ADC_CommonInitStructure.ADC_DMAMode = ADC_DMAMode_OneShot;
- ADC_CommonInitStructure.ADC_TwoSamplingDelay = 0;
- ADC_CommonInit(adc, &ADC_CommonInitStructure);
-
- ADC_InitStructure.ADC_ContinuousConvMode = ADC_ContinuousConvMode_Disable;
- ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
- ADC_InitStructure.ADC_ExternalTrigConvEvent = ADC_ExternalTrigConvEvent_0;
- ADC_InitStructure.ADC_ExternalTrigEventEdge = ADC_ExternalTrigEventEdge_None;
- ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
- ADC_InitStructure.ADC_OverrunMode = ADC_OverrunMode_Disable;
- ADC_InitStructure.ADC_AutoInjMode = ADC_AutoInjec_Disable;
- ADC_InitStructure.ADC_NbrOfRegChannel = 1;
- ADC_Init(adc, &ADC_InitStructure);
-
- // Enable ADC
- ADC_Cmd(adc, ENABLE);
-
- while (!ADC_GetFlagStatus(adc, ADC_FLAG_RDY)) {}
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj) {
- // Get ADC registers structure address
- ADC_TypeDef *adc = (ADC_TypeDef *)(obj->adc);
- uint8_t channel = 0;
-
- // Configure ADC channel
- switch (obj->pin) {
- case PA_0:
- channel = ADC_Channel_1;
- break;
- case PA_1:
- channel = ADC_Channel_2;
- break;
- case PA_2:
- channel = ADC_Channel_3;
- break;
- case PA_3:
- channel = ADC_Channel_4;
- break;
- case PA_4:
- channel = ADC_Channel_5;
- break;
- case PC_0:
- channel = ADC_Channel_6;
- break;
- case PC_1:
- channel = ADC_Channel_7;
- break;
- case PC_2:
- channel = ADC_Channel_8;
- break;
- case PC_3:
- channel = ADC_Channel_9;
- break;
- case PA_6:
- channel = ADC_Channel_10;
- break;
- case PB_0:
- channel = ADC_Channel_11;
- break;
- case PB_1:
- channel = ADC_Channel_12;
- break;
- case PB_13:
- channel = ADC_Channel_13;
- break;
- case PB_11:
- channel = ADC_Channel_14;
- break;
- case PA_7:
- channel = ADC_Channel_15;
- break;
- default:
- return 0;
- }
-
- ADC_RegularChannelConfig(adc, channel, 1, ADC_SampleTime_7Cycles5);
-
- ADC_StartConversion(adc); // Start conversion
-
- while (ADC_GetFlagStatus(adc, ADC_FLAG_EOC) == RESET); // Wait end of conversion
-
- return (ADC_GetConversionValue(adc)); // Get conversion value
-}
-
-uint16_t analogin_read_u16(analogin_t *obj) {
- return (adc_read(obj));
-}
-
-float analogin_read(analogin_t *obj) {
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/analogout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,110 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-
-#define RANGE_12BIT (0xFFF)
-
-static const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA(GPIO_Mode_AN, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF)}, // DAC_OUT1
- {NC, NC, 0}
-};
-
-void analogout_init(dac_t *obj, PinName pin) {
- DAC_TypeDef *dac;
- DAC_InitTypeDef DAC_InitStructure;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
- MBED_ASSERT(obj->dac == (DACName)NC);
-
- dac = (DAC_TypeDef *)(obj->dac);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the channel for the write and read functions
- obj->channel = pin;
-
- // Enable DAC clock
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
-
- // Configure and enable DAC channel
- DAC_StructInit(&DAC_InitStructure);
- DAC_Init(dac, DAC_Channel_1, &DAC_InitStructure);
- DAC_Cmd(dac, DAC_Channel_1, ENABLE);
-
- analogout_write_u16(obj, 0);
-}
-
-void analogout_free(dac_t *obj) {
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value) {
- DAC_TypeDef *dac = (DAC_TypeDef *)(obj->dac);
- DAC_SetChannel1Data(dac, DAC_Align_12b_R, value);
-}
-
-static inline int dac_read(dac_t *obj) {
- DAC_TypeDef *dac = (DAC_TypeDef *)(obj->dac);
- return (int)DAC_GetDataOutputValue(dac, DAC_Channel_1);
-}
-
-void analogout_write(dac_t *obj, float value) {
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)RANGE_12BIT); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)RANGE_12BIT));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value) {
- if (value > (uint16_t)RANGE_12BIT) {
- dac_write(obj, (uint16_t)RANGE_12BIT); // Max value
- } else {
- dac_write(obj, value);
- }
-}
-
-float analogout_read(dac_t *obj) {
- uint32_t value = dac_read(obj);
- return (float)value * (1.0f / (float)RANGE_12BIT);
-}
-
-uint16_t analogout_read_u16(dac_t *obj) {
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,71 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 0 // Not yet supported - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 0 // Not yet supported - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 - -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/gpio_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,74 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin) {
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(GPIO_Mode_IN, 0, GPIO_PuPd_NOPULL, 0xFF));
-
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin) {
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode) {
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(GPIO_Mode_OUT, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(GPIO_Mode_IN, 0, GPIO_PuPd_NOPULL, 0xFF));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/gpio_irq_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,255 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-#define CHANNEL_NUM (7)
-
-static uint32_t channel_ids[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-static uint32_t channel_gpio[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-static uint32_t channel_pin[CHANNEL_NUM] = {0, 0, 0, 0, 0, 0, 0};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(channel_gpio[irq_index]);
- uint32_t pin = (uint32_t)(1 << channel_pin[irq_index]);
-
- // Clear interrupt flag
- if (EXTI_GetITStatus(channel_pin[irq_index]) != RESET) {
- EXTI_ClearITPendingBit(channel_pin[irq_index]);
- }
-
- if (channel_ids[irq_index] == 0) return;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(channel_ids[irq_index], IRQ_FALL);
- } else {
- irq_handler(channel_ids[irq_index], IRQ_RISE);
- }
-}
-
-static void gpio_irq0(void) {
- handle_interrupt_in(0); // EXTI line 0
-}
-
-static void gpio_irq1(void) {
- handle_interrupt_in(1); // EXTI line 1
-}
-
-static void gpio_irq2(void) {
- handle_interrupt_in(2); // EXTI line 2
-}
-
-static void gpio_irq3(void) {
- handle_interrupt_in(3); // EXTI line 3
-}
-
-static void gpio_irq4(void) {
- handle_interrupt_in(4); // EXTI line 4
-}
-
-static void gpio_irq5(void) {
- handle_interrupt_in(5); // EXTI lines 5 to 9
-}
-
-static void gpio_irq6(void) {
- handle_interrupt_in(6); // EXTI lines 10 to 15
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) {
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_TS_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("This pin is not supported with InterruptIn.");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Enable SYSCFG clock
- RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
-
- // Connect EXTI line to pin
- SYSCFG_EXTILineConfig(port_index, pin_index);
-
- // Configure EXTI line
- EXTI_InitTypeDef EXTI_InitStructure;
- EXTI_InitStructure.EXTI_Line = pin_index;
- EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
- EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
- EXTI_InitStructure.EXTI_LineCmd = ENABLE;
- EXTI_Init(&EXTI_InitStructure);
-
- // Enable and set EXTI interrupt to the lowest priority
- NVIC_InitTypeDef NVIC_InitStructure;
- NVIC_InitStructure.NVIC_IRQChannel = irq_n;
- NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F;
- NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F;
- NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
- NVIC_Init(&NVIC_InitStructure);
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- channel_ids[irq_index] = id;
- channel_gpio[irq_index] = gpio_add;
- channel_pin[irq_index] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj) {
- channel_ids[obj->irq_index] = 0;
- channel_gpio[obj->irq_index] = 0;
- channel_pin[obj->irq_index] = 0;
- // Disable EXTI line
- EXTI_InitTypeDef EXTI_InitStructure;
- EXTI_StructInit(&EXTI_InitStructure);
- EXTI_Init(&EXTI_InitStructure);
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) {
- EXTI_InitTypeDef EXTI_InitStructure;
-
- EXTI_InitStructure.EXTI_Line = channel_pin[obj->irq_index];
- EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
-
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
- obj->event = EDGE_RISE;
- }
- }
-
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
- obj->event = EDGE_FALL;
- }
- }
-
- if (enable) {
- EXTI_InitStructure.EXTI_LineCmd = ENABLE;
- } else {
- EXTI_InitStructure.EXTI_LineCmd = DISABLE;
- }
-
- EXTI_Init(&EXTI_InitStructure);
-}
-
-void gpio_irq_enable(gpio_irq_t *obj) {
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj) {
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/gpio_object.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,73 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint16_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/i2c_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,354 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-static const PinMap PinMap_I2C_SDA[] = {
- {PA_10, I2C_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {PA_14, I2C_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {PB_5, I2C_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_8)},
- {PB_7, I2C_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {PB_9, I2C_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {PC_9, I2C_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_3)},
- {PF_0, I2C_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_3)},
- {PA_9, I2C_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {PA_15, I2C_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {PB_6, I2C_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {PB_8, I2C_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {PF_1, I2C_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_OD, GPIO_PuPd_UP, GPIO_AF_4)},
- {NC, NC, 0}
-};
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C clock
- if (obj->i2c == I2C_1) {
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE);
- }
- if (obj->i2c == I2C_2) {
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C2, ENABLE);
- }
- if (obj->i2c == I2C_3) {
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C3, ENABLE);
- }
-
- // Configure I2C pins
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(scl, OpenDrain);
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pin_mode(sda, OpenDrain);
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz) {
- MBED_ASSERT((hz == 100000) || (hz == 200000) || (hz == 400000) || (hz == 1000000));
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2C_InitTypeDef I2C_InitStructure;
- uint32_t tim;
-
- // Disable the Fast Mode Plus capability
- RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); // Enable SYSCFG clock
- SYSCFG_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus_I2C1, DISABLE);
- SYSCFG_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus_I2C2, DISABLE);
-
- /*
- Values calculated with I2C_Timing_Configuration_V1.0.1.xls file (see AN4235)
- * Standard mode (up to 100 kHz)
- * Fast Mode (up to 400 kHz)
- * Fast Mode Plus (up to 1 MHz)
- Below values obtained with:
- - I2C clock source = 8 MHz (HSI clock per default)
- - Analog filter delay = ON
- - Digital filter coefficient = 0
- - Rise time = 100 ns
- - Fall time = 10ns
- */
- switch (hz) {
- case 100000:
- tim = 0x00201D2B; // Standard mode
- break;
- case 200000:
- tim = 0x0010021E; // Fast Mode
- break;
- case 400000:
- tim = 0x0010020A; // Fast Mode
- break;
- case 1000000:
- tim = 0x00100001; // Fast Mode Plus
- // Enable the Fast Mode Plus capability
- if (obj->i2c == I2C_1) {
- SYSCFG_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus_I2C1, ENABLE);
- }
- if (obj->i2c == I2C_2) {
- SYSCFG_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus_I2C2, ENABLE);
- }
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2C_DeInit(i2c);
- I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
- I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
- I2C_InitStructure.I2C_DigitalFilter = 0x00;
- I2C_InitStructure.I2C_OwnAddress1 = 0x00;
- I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
- I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
- I2C_InitStructure.I2C_Timing = tim;
- I2C_Init(i2c, &I2C_InitStructure);
-
- I2C_Cmd(i2c, ENABLE);
-}
-
-inline int i2c_start(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Test BUSY Flag
- timeout = LONG_TIMEOUT;
- while (I2C_GetFlagStatus(i2c, I2C_ISR_BUSY) != RESET) {
- timeout--;
- if (timeout == 0) {
- return 0;
- }
- }
-
- I2C_GenerateSTART(i2c, ENABLE);
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- I2C_GenerateSTOP(i2c, ENABLE);
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int count;
- int value;
-
- if (length == 0) return 0;
-
- // Configure slave address, nbytes, reload, end mode and start or stop generation
- I2C_TransferHandling(i2c, address, length, I2C_AutoEnd_Mode, I2C_Generate_Start_Read);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- //int timeout;
- int count;
-
- if (length == 0) return 0;
-
- // [TODO] The stop is always sent even with I2C_SoftEnd_Mode. To be corrected.
-
- // Configure slave address, nbytes, reload, end mode and start or stop generation
- //if (stop) {
- I2C_TransferHandling(i2c, address, length, I2C_AutoEnd_Mode, I2C_Generate_Start_Write);
- //}
- //else {
- // I2C_TransferHandling(i2c, address, length, I2C_SoftEnd_Mode, I2C_Generate_Start_Write);
- //}
-
- // Write all bytes
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return 0;
- }
- }
-
- /*
- if (stop) {
- // Wait until STOPF flag is set
- timeout = LONG_TIMEOUT;
- while (I2C_GetFlagStatus(i2c, I2C_ISR_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return 0;
- }
- }
- // Clear STOPF flag
- I2C_ClearFlag(i2c, I2C_ICR_STOPCF);
- }
- */
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint8_t data;
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (I2C_GetFlagStatus(i2c, I2C_ISR_RXNE) == RESET) {
- timeout--;
- if (timeout == 0) {
- return 0;
- }
- }
-
- data = I2C_ReceiveData(i2c);
-
- return (int)data;
-}
-
-int i2c_byte_write(i2c_t *obj, int data) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (I2C_GetFlagStatus(i2c, I2C_ISR_TXIS) == RESET) {
- timeout--;
- if (timeout == 0) {
- return 0;
- }
- }
-
- I2C_SendData(i2c, (uint8_t)data);
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj) {
- if (obj->i2c == I2C_1) {
- RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE);
- RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE);
- }
- if (obj->i2c == I2C_2) {
- RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE);
- RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE);
- }
- if (obj->i2c == I2C_3) {
- RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C3, ENABLE);
- RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C3, DISABLE);
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave) {
- // Nothing to do
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj) {
- // TO BE DONE
- return (0);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length) {
- int count = 0;
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- data[count] = i2c_byte_read(obj, 0);
- }
-
- return count;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length) {
- int count = 0;
-
- // Write all bytes
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- return count;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/mbed_overrides.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,35 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-extern void SystemCoreClockUpdate(void);
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init() {
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,102 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint16_t *reg_in;
- __IO uint16_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
-};
-
-struct i2c_s {
- I2CName i2c;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/pinmap.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,135 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx) {
- uint32_t gpio_add;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOC, ENABLE);
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOD, ENABLE);
- break;
- case PortE:
- gpio_add = GPIOE_BASE;
- RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOE, ENABLE);
- break;
- case PortF:
- gpio_add = GPIOF_BASE;
- RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOF, ENABLE);
- break;
- default:
- gpio_add = 0;
- error("Port number is not correct.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data) {
- MBED_ASSERT(pin != (PinName)NC);
-
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t otype = STM_PIN_OTYPE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure Alternate Function
- // Warning: Must be done before the GPIO is initialized
- if (afnum != 0xFF) {
- GPIO_PinAFConfig(gpio, (uint16_t)pin_index, afnum);
- }
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.GPIO_Pin = (uint16_t)(1 << pin_index);
- GPIO_InitStructure.GPIO_Mode = (GPIOMode_TypeDef)mode;
- GPIO_InitStructure.GPIO_Speed = GPIO_Speed_Level_3;
- GPIO_InitStructure.GPIO_OType = (GPIOOType_TypeDef)otype;
- GPIO_InitStructure.GPIO_PuPd = (GPIOPuPd_TypeDef)pupd;
- GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode) {
- MBED_ASSERT(pin != (PinName)NC);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/port_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,97 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n) {
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir) {
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir) {
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(GPIO_Mode_OUT, GPIO_OType_PP, GPIO_PuPd_NOPULL, 0xFF));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(GPIO_Mode_IN, 0, GPIO_PuPd_NOPULL, 0xFF));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode) {
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value) {
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj) {
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/pwmout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,274 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pwmout_api.h"
-
-#include "cmsis.h"
-#include "pinmap.h"
-
-// TIM2 cannot be used because already used by the us_ticker
-static const PinMap PinMap_PWM[] = {
-// {PA_0, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH1
-// {PA_1, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH2
- {PA_1, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_9)}, // TIM15_CH1N
- {PA_2, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_9)}, // TIM15_CH1
- {PA_3, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_9)}, // TIM15_CH2
-// {PA_5, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH1
- {PA_6, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1
- {PA_7, PWM_17, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM17_CH1
-// {PA_7, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH1N
- {PA_8, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH2
-// {PA_9, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_10)}, // TIM2_CH3
- {PA_10, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH3
-// {PA_10, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_10)}, // TIM2_CH4
- {PA_11, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_11)}, // TIM1_CH4
-// {PA_11, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH1N
- {PA_12, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1
-// {PA_12, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH2N
- {PA_13, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1N
-// {PA_15, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH2N
- {PB_1, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH3N
-// {PB_3, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH2
- {PB_4, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1
- {PB_5, PWM_17, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_10)}, // TIM17_CH1
- {PB_6, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1N
- {PB_7, PWM_17, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM17_CH1N
- {PB_8, PWM_16, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM16_CH1
- {PB_9, PWM_17, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM17_CH1
-// {PB_10, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH3
-// {PB_11, PWM_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH1N
- {PB_14, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM15_CH1
-// {PB_14, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH2N
- {PB_15, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_1)}, // TIM15_CH2
-// {PB_15, PWM_15, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM15_CH1N
-// {PB_15, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_4)}, // TIM1_CH3N
-
- {PC_0, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM1_CH1
- {PC_1, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM1_CH2
- {PC_2, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM1_CH3
- {PC_3, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_2)}, // TIM1_CH4
- {PC_13, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_4)}, // TIM1_CH1N
-
- {PF_0, PWM_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_6)}, // TIM1_CH3N
-
- {NC, NC, 0}
-};
-
-void pwmout_init(pwmout_t* obj, PinName pin) {
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
- MBED_ASSERT(obj->pwm == (PWMName)NC);
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE);
- if (obj->pwm == PWM_15) RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM15, ENABLE);
- if (obj->pwm == PWM_16) RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM16, ENABLE);
- if (obj->pwm == PWM_17) RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM17, ENABLE);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj) {
- TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm);
- TIM_DeInit(tim);
-}
-
-void pwmout_write(pwmout_t* obj, float value) {
- TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm);
- TIM_OCInitTypeDef TIM_OCInitStructure;
-
- if (value < (float)0.0) {
- value = (float)0.0;
- } else if (value > (float)1.0) {
- value = (float)1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
- TIM_OCInitStructure.TIM_Pulse = obj->pulse;
- TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
- TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCPolarity_High;
- TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Reset;
- TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCNIdleState_Reset;
-
- switch (obj->pin) {
- // Channels 1
-// case PA_0:
- case PA_2:
-// case PA_5:
- case PA_6:
- case PA_7:
- case PA_8:
- case PA_12:
-// case PA_15:
- case PB_4:
- case PB_5:
- case PB_8:
- case PB_9:
- case PB_14:
- case PC_0:
- TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
- TIM_OC1PreloadConfig(tim, TIM_OCPreload_Enable);
- TIM_OC1Init(tim, &TIM_OCInitStructure);
- break;
- // Channels 1N
- case PA_1:
-// case PA_7:
-// case PA_11:
- case PA_13:
- case PB_6:
- case PB_7:
- case PB_13:
-// case PB_15:
- case PC_13:
- TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
- TIM_OC1PreloadConfig(tim, TIM_OCPreload_Enable);
- TIM_OC1Init(tim, &TIM_OCInitStructure);
- break;
- // Channels 2
-// case PA_1:
- case PA_3:
- case PA_9:
-// case PB_3:
- case PB_15:
- case PC_1:
- TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
- TIM_OC2PreloadConfig(tim, TIM_OCPreload_Enable);
- TIM_OC2Init(tim, &TIM_OCInitStructure);
- break;
- // Channels 2N
-// case PA_12:
- case PB_0:
-// case PB_14:
- TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
- TIM_OC2PreloadConfig(tim, TIM_OCPreload_Enable);
- TIM_OC2Init(tim, &TIM_OCInitStructure);
- break;
- // Channels 3
-// case PA_9:
- case PA_10:
-// case PB_10:
- case PC_2:
- TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
- TIM_OC3PreloadConfig(tim, TIM_OCPreload_Enable);
- TIM_OC3Init(tim, &TIM_OCInitStructure);
- break;
- // Channels 3N
- case PB_1:
- case PF_0:
-// case PB_15:
- TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
- TIM_OC3PreloadConfig(tim, TIM_OCPreload_Enable);
- TIM_OC3Init(tim, &TIM_OCInitStructure);
- break;
- // Channels 4
-// case PA_10:
- case PA_11:
-// case PB_11:
- case PC_3:
- TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
- TIM_OC4PreloadConfig(tim, TIM_OCPreload_Enable);
- TIM_OC4Init(tim, &TIM_OCInitStructure);
- break;
- default:
- return;
- }
-}
-
-float pwmout_read(pwmout_t* obj) {
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? ((float)1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds) {
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms) {
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us) {
- TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm);
- TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
- float dc = pwmout_read(obj);
-
- TIM_Cmd(tim, DISABLE);
-
- obj->period = us;
-
- TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
- TIM_TimeBaseStructure.TIM_Period = obj->period - 1;
- TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
- TIM_TimeBaseStructure.TIM_ClockDivision = 0;
- TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
- TIM_TimeBaseInit(tim, &TIM_TimeBaseStructure);
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- TIM_ARRPreloadConfig(tim, ENABLE);
-
- // Warning: Main Output must be enabled on TIM1, TIM8, TIM5, TIM6 and TIM17
- if ((obj->pwm == PWM_1) || (obj->pwm == PWM_15) || (obj->pwm == PWM_16) || (obj->pwm == PWM_17)) {
- TIM_CtrlPWMOutputs(tim, ENABLE);
- }
-
- TIM_Cmd(tim, ENABLE);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds) {
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) {
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us) {
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/rtc_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,138 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-static int rtc_inited = 0;
-
-void rtc_init(void) {
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); // Enable PWR clock
-
- PWR_BackupAccessCmd(ENABLE); // Enable access to RTC
-
- // Be sure to start correctly
- RCC_BackupResetCmd(ENABLE);
- RCC_BackupResetCmd(DISABLE);
-
- // Note: the LSI is used as RTC source clock
- // The RTC Clock may vary due to LSI frequency dispersion.
- RCC_LSICmd(ENABLE); // Enable LSI
-
- while (RCC_GetFlagStatus(RCC_FLAG_LSIRDY) == RESET) {} // Wait until ready
-
- RCC_RTCCLKConfig(RCC_RTCCLKSource_LSI); // Select LSI as RTC Clock Source
-
- RCC_RTCCLKCmd(ENABLE); // Enable RTC Clock
-
- RTC_WaitForSynchro(); // Wait for RTC registers synchronization
-
- uint32_t lsi_freq = 40000; // [TODO] To be measured precisely using a timer input capture
-
- RTC_InitTypeDef RTC_InitStructure;
- RTC_InitStructure.RTC_AsynchPrediv = 127;
- RTC_InitStructure.RTC_SynchPrediv = (lsi_freq / 128) - 1;
- RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
- RTC_Init(&RTC_InitStructure);
-
- rtc_inited = 1;
-}
-
-void rtc_free(void) {
- RCC_DeInit(); // Resets the RCC clock configuration to the default reset state
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void) {
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void) {
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- // Read actual date and time
- RTC_GetTime(RTC_Format_BIN, &timeStruct);
- RTC_GetDate(RTC_Format_BIN, &dateStruct);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.RTC_WeekDay;
- timeinfo.tm_mon = dateStruct.RTC_Month - 1;
- timeinfo.tm_mday = dateStruct.RTC_Date;
- timeinfo.tm_year = dateStruct.RTC_Year + 100;
- timeinfo.tm_hour = timeStruct.RTC_Hours;
- timeinfo.tm_min = timeStruct.RTC_Minutes;
- timeinfo.tm_sec = timeStruct.RTC_Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t) {
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.RTC_WeekDay = timeinfo->tm_wday;
- dateStruct.RTC_Month = timeinfo->tm_mon + 1;
- dateStruct.RTC_Date = timeinfo->tm_mday;
- dateStruct.RTC_Year = timeinfo->tm_year - 100;
- timeStruct.RTC_Hours = timeinfo->tm_hour;
- timeStruct.RTC_Minutes = timeinfo->tm_min;
- timeStruct.RTC_Seconds = timeinfo->tm_sec;
- timeStruct.RTC_H12 = RTC_HourFormat_24;
-
- // Change the RTC current date/time
- PWR_BackupAccessCmd(ENABLE); // Enable access to RTC
- RTC_SetDate(RTC_Format_BIN, &dateStruct);
- RTC_SetTime(RTC_Format_BIN, &timeStruct);
- PWR_BackupAccessCmd(DISABLE); // Disable access to RTC
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/serial_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,312 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-
-static const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PA_9, UART_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PA_14, UART_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PB_3, UART_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PB_6, UART_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PB_9, UART_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PB_10, UART_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PC_4, UART_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PC_10, UART_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PA_10, UART_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PA_15, UART_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PB_4, UART_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PB_7, UART_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PB_8, UART_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PB_11, UART_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PC_5, UART_1, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {PC_11, UART_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_UP, GPIO_AF_7)},
- {NC, NC, 0}
-};
-
-#define UART_NUM (2)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0};
-
-static uart_irq_handler irq_handler;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_usart(serial_t *obj) {
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
- USART_InitTypeDef USART_InitStructure;
-
- USART_Cmd(usart, DISABLE);
-
- USART_InitStructure.USART_BaudRate = obj->baudrate;
- USART_InitStructure.USART_WordLength = obj->databits;
- USART_InitStructure.USART_StopBits = obj->stopbits;
- USART_InitStructure.USART_Parity = obj->parity;
- USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
- USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
- USART_Init(usart, &USART_InitStructure);
-
- USART_Cmd(usart, ENABLE);
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx) {
- // Determine the UART to use
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- if (obj->uart == UART_1) {
- RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
- }
- if (obj->uart == UART_2) {
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
- }
- if (obj->uart == UART_3) {
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = USART_WordLength_8b;
- obj->stopbits = USART_StopBits_1;
- obj->parity = USART_Parity_No;
-
- init_usart(obj);
-
- // The index is used by irq
- if (obj->uart == UART_1) obj->index = 0;
- if (obj->uart == UART_2) obj->index = 1;
- if (obj->uart == UART_3) obj->index = 2;
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-
-}
-
-void serial_free(serial_t *obj) {
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate) {
- obj->baudrate = baudrate;
- init_usart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) {
- if (data_bits == 8) {
- obj->databits = USART_WordLength_8b;
- } else {
- obj->databits = USART_WordLength_9b;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = USART_Parity_Odd;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = USART_Parity_Even;
- break;
- default: // ParityNone
- obj->parity = USART_Parity_No;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = USART_StopBits_2;
- } else {
- obj->stopbits = USART_StopBits_1;
- }
-
- init_usart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-// not api
-static void uart_irq(USART_TypeDef* usart, int id) {
- if (serial_irq_ids[id] != 0) {
- if (USART_GetITStatus(usart, USART_IT_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- USART_ClearITPendingBit(usart, USART_IT_TC);
- }
- if (USART_GetITStatus(usart, USART_IT_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- USART_ClearITPendingBit(usart, USART_IT_RXNE);
- }
- }
-}
-
-static void uart1_irq(void) {
- uart_irq((USART_TypeDef*)UART_1, 0);
-}
-static void uart2_irq(void) {
- uart_irq((USART_TypeDef*)UART_2, 1);
-}
-static void uart3_irq(void) {
- uart_irq((USART_TypeDef*)UART_3, 2);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) {
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) {
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_3) {
- irq_n = USART3_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- USART_ITConfig(usart, USART_IT_RXNE, ENABLE);
- } else { // TxIrq
- USART_ITConfig(usart, USART_IT_TC, ENABLE);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- USART_ITConfig(usart, USART_IT_RXNE, DISABLE);
- // Check if TxIrq is disabled too
- if ((usart->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- USART_ITConfig(usart, USART_IT_TXE, DISABLE);
- // Check if RxIrq is disabled too
- if ((usart->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj) {
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(USART_ReceiveData(usart));
-}
-
-void serial_putc(serial_t *obj, int c) {
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- USART_SendData(usart, (uint16_t)c);
-}
-
-int serial_readable(serial_t *obj) {
- int status;
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((USART_GetFlagStatus(usart, USART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj) {
- int status;
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((USART_GetFlagStatus(usart, USART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj) {
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
- USART_ClearFlag(usart, USART_FLAG_TXE);
- USART_ClearFlag(usart, USART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx) {
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj) {
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
- USART_RequestCmd(usart, USART_Request_SBKRQ, ENABLE);
-}
-
-void serial_break_clear(serial_t *obj) {
- USART_TypeDef *usart = (USART_TypeDef *)(obj->uart);
- USART_RequestCmd(usart, USART_Request_SBKRQ, DISABLE);
- USART_ClearFlag(usart, USART_FLAG_SBK);
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/sleep.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,55 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-#include "cmsis.h"
-
-// This function is in the system_stm32f30x.c file
-extern void SetSysClock(void);
-
-// MCU SLEEP mode
-void sleep(void) {
- // Enable PWR clock
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
-
- // Request to enter SLEEP mode
- PWR_EnterSleepMode(PWR_SLEEPEntry_WFI);
-}
-
-// MCU STOP mode
-void deepsleep(void) {
- // Enable PWR clock
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
-
- // Enter Stop Mode
- PWR_EnterSTOPMode(PWR_Regulator_LowPower, PWR_STOPEntry_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/spi_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,273 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-
-static const PinMap PinMap_SPI_MOSI[] = {
- {PA_11, SPI_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_5)},
- {PB_5, SPI_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_6)},
- {PB_15, SPI_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_5)},
- {PC_12, SPI_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_6)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_MISO[] = {
- {PA_10, SPI_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_5)},
- {PB_4, SPI_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_6)},
- {PB_14, SPI_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_5)},
- {PC_11, SPI_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_6)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_SCLK[] = {
- {PB_3, SPI_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_6)},
- {PB_13, SPI_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_5)},
- {PC_10, SPI_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_6)},
- {PF_1, SPI_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_5)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_6)},
- {PA_15, SPI_3, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_6)},
- {PB_12, SPI_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_5)},
- {PF_0, SPI_2, STM_PIN_DATA(GPIO_Mode_AF, GPIO_OType_PP, GPIO_PuPd_DOWN, GPIO_AF_5)},
- {NC, NC, 0}
-};
-
-static void init_spi(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- SPI_InitTypeDef SPI_InitStructure;
-
- SPI_Cmd(spi, DISABLE);
-
- SPI_InitStructure.SPI_Mode = obj->mode;
- SPI_InitStructure.SPI_NSS = obj->nss;
- SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
- SPI_InitStructure.SPI_DataSize = obj->bits;
- SPI_InitStructure.SPI_CPOL = obj->cpol;
- SPI_InitStructure.SPI_CPHA = obj->cpha;
- SPI_InitStructure.SPI_BaudRatePrescaler = obj->br_presc;
- SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
- SPI_InitStructure.SPI_CRCPolynomial = 7;
- SPI_Init(spi, &SPI_InitStructure);
-
- SPI_RxFIFOThresholdConfig(spi, SPI_RxFIFOThreshold_QF);
-
- SPI_Cmd(spi, ENABLE);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
-
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_2) {
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE);
- }
- if (obj->spi == SPI_3) {
- RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI3, ENABLE);
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DataSize_8b;
- obj->cpol = SPI_CPOL_Low;
- obj->cpha = SPI_CPHA_1Edge;
- obj->br_presc = SPI_BaudRatePrescaler_256;
-
- if (ssel != NC) {
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- } else {
- obj->nss = SPI_NSS_SOFT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- SPI_I2S_DeInit(spi);
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave) {
- // Save new values
- if (bits == 8) {
- obj->bits = SPI_DataSize_8b;
- } else {
- obj->bits = SPI_DataSize_16b;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_CPOL_Low;
- obj->cpha = SPI_CPHA_1Edge;
- break;
- case 1:
- obj->cpol = SPI_CPOL_Low;
- obj->cpha = SPI_CPHA_2Edge;
- break;
- case 2:
- obj->cpol = SPI_CPOL_High;
- obj->cpha = SPI_CPHA_1Edge;
- break;
- default:
- obj->cpol = SPI_CPOL_High;
- obj->cpha = SPI_CPHA_2Edge;
- break;
- }
-
- if (obj->nss != SPI_NSS_SOFT) {
- obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
- }
-
- obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz) {
- // Values depend of PCLK1: 32 MHz if HSI is used, 36 MHz if HSE is used
- if (hz < 250000) {
- obj->br_presc = SPI_BaudRatePrescaler_256; // 125 kHz - 141 kHz
- } else if ((hz >= 250000) && (hz < 500000)) {
- obj->br_presc = SPI_BaudRatePrescaler_128; // 250 kHz - 280 kHz
- } else if ((hz >= 500000) && (hz < 1000000)) {
- obj->br_presc = SPI_BaudRatePrescaler_64; // 500 kHz - 560 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BaudRatePrescaler_32; // 1 MHz - 1.13 MHz
- } else if ((hz >= 2000000) && (hz < 4000000)) {
- obj->br_presc = SPI_BaudRatePrescaler_16; // 2 MHz - 2.25 MHz
- } else if ((hz >= 4000000) && (hz < 8000000)) {
- obj->br_presc = SPI_BaudRatePrescaler_8; // 4 MHz - 4.5 MHz
- } else if ((hz >= 8000000) && (hz < 16000000)) {
- obj->br_presc = SPI_BaudRatePrescaler_4; // 8 MHz - 9 MHz
- } else { // >= 16000000
- obj->br_presc = SPI_BaudRatePrescaler_2; // 16 MHz - 18 MHz
- }
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj) {
- int status;
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((SPI_I2S_GetFlagStatus(spi, SPI_I2S_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj) {
- int status;
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((SPI_I2S_GetFlagStatus(spi, SPI_I2S_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DataSize_8b) {
- SPI_SendData8(spi, (uint8_t)value);
- } else {
- SPI_I2S_SendData16(spi, (uint16_t)value);
- }
-}
-
-static inline int ssp_read(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DataSize_8b) {
- return (int)SPI_ReceiveData8(spi);
- } else {
- return (int)SPI_I2S_ReceiveData16(spi);
- }
-}
-
-static inline int ssp_busy(spi_t *obj) {
- int status;
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- status = ((SPI_I2S_GetFlagStatus(spi, SPI_I2S_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value) {
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj) {
- return (ssp_readable(obj) && !ssp_busy(obj)) ? (1) : (0);
-};
-
-int spi_slave_read(spi_t *obj) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- if (obj->bits == SPI_DataSize_8b) {
- return (int)SPI_ReceiveData8(spi);
- } else {
- return (int)SPI_I2S_ReceiveData16(spi);
- }
-}
-
-void spi_slave_write(spi_t *obj, int value) {
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DataSize_8b) {
- SPI_SendData8(spi, (uint8_t)value);
- } else {
- SPI_I2S_SendData16(spi, (uint16_t)value);
- }
-}
-
-int spi_busy(spi_t *obj) {
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/us_ticker.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,81 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-// 32-bit timer selection
-#define TIM_MST TIM2
-#define TIM_MST_IRQ TIM2_IRQn
-#define TIM_MST_RCC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE)
-
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void) {
- TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
-
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- // Enable timer clock
- TIM_MST_RCC;
-
- // Configure time base
- TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
- TIM_TimeBaseStructure.TIM_Period = 0xFFFFFFFF;
- TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 �s tick
- TIM_TimeBaseStructure.TIM_ClockDivision = 0;
- TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
- TIM_TimeBaseInit(TIM_MST, &TIM_TimeBaseStructure);
-
- NVIC_SetVector(TIM_MST_IRQ, (uint32_t)us_ticker_irq_handler);
- NVIC_EnableIRQ(TIM_MST_IRQ);
-
- // Enable timer
- TIM_Cmd(TIM_MST, ENABLE);
-}
-
-uint32_t us_ticker_read() {
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp) {
- // Set new output compare value
- TIM_SetCompare1(TIM_MST, (uint32_t)timestamp);
- // Enable IT
- TIM_ITConfig(TIM_MST, TIM_IT_CC1, ENABLE);
-}
-
-void us_ticker_disable_interrupt(void) {
- TIM_ITConfig(TIM_MST, TIM_IT_CC1, DISABLE);
-}
-
-void us_ticker_clear_interrupt(void) {
- TIM_ClearITPendingBit(TIM_MST, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,92 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
-} UARTName;
-
-#define STDIO_UART_TX PC_6
-#define STDIO_UART_RX PC_7
-#define STDIO_UART UART_6
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE,
- PWM_12 = (int)TIM12_BASE,
- PWM_13 = (int)TIM13_BASE,
- PWM_14 = (int)TIM14_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,204 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_0, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PF_0 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_5 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PH_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PF_1 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_4 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10,1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,286 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_3,
- A2 = PA_4,
- A3 = PA_5,
- A4 = PA_6,
- A5 = PB_0,
- A6 = PB_1,
- A7 = PC_0,
- D0 = PD_3,
- D1 = PD_6,
- D2 = PD_11,
- D3 = PD_12,
- D4 = PD_13,
- D5 = PA_8,
- D6 = PB_6,
- D7 = PB_7,
- D8 = PB_15,
- D9 = PB_14,
- D10 = PA_15,
- D11 = PB_5,
- D12 = PB_4,
- D13 = PB_3,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PB_3,
- LED2 = PD_8,
- LED3 = PD_9,
- LED4 = PD_10,
- USBTX = PC_6, /* USART6 */
- USBRX = PC_7,
- I2C_SCL = PB_8, /* I2C1 */
- I2C_SDA = PB_9,
- SPI_MOSI = PC_3,
- SPI_MISO = PC_2,
- SPI_SCK = PB_10,
- SPI_CS = PE_3,
- SD_MOSI = PC_3,
- SD_MISO = PC_2,
- SD_SCK = PB_10,
- SD_CS = PE_2,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,52 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct dac_s {
- DACName dac;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,81 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,190 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10,1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,176 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Generic signals namings
- LED1 = PD_12,
- LED2 = PD_13,
- LED3 = PD_14,
- LED4 = PD_15,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,71 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 1 -#define LED_RED LED1 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,108 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,92 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE,
- PWM_12 = (int)TIM12_BASE,
- PWM_13 = (int)TIM13_BASE,
- PWM_14 = (int)TIM14_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,262 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_0, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PF_0 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_5 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PF_1 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_4 , I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_7 , I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM3_CH2N
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM3_CH3N
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
- {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
-
- {PD_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
- {PD_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PD_14, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
- {PD_15, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-
- {PE_5, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PE_6, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PE_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
- {PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PE_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
-
- {PF_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
- {PF_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
- {PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
- {PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
-
-// {PH_10, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
-// {PH_11, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
-// {PH_12, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
- {PH_13, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PH_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PH_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
-
-// {PI_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
- {PI_2, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
- {PI_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
- {PI_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
- {PI_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
-// {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
-// {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PG_9, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,261 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
- // Generic signals namings
- LED1 = PD_13,
- LED2 = PD_12,
- LED3 = PD_13,
- LED4 = PD_12,
- LED5 = PD_14,
- LED6 = PD_15,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_2, /* USART2 */
- SERIAL_RX = PA_3,
- USBTX = PA_2, /* USART2 */
- USBRX = PA_3,
- I2C_SCL = PB_8, /* I2C1 */
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,52 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,71 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 1 -#define LED_RED LED1 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct dac_s {
- DACName dac;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,99 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
- UART_7 = (int)UART7_BASE,
- UART_8 = (int)UART8_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_9
-#define STDIO_UART_RX PA_10
-#define STDIO_UART UART_1
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE,
- SPI_6 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE,
- PWM_12 = (int)TIM12_BASE,
- PWM_13 = (int)TIM13_BASE,
- PWM_14 = (int)TIM14_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,285 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {PF_3, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9
- {PF_4, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14
- {PF_5, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15
- {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
- {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
- {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6
- {PF_9, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
- {PF_10,ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8
- {NC, NC, 0}
-};
-
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_0, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_5, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_4, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PH_7, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10,1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
- {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
-
- {PD_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
- {PD_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PD_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
- {PD_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-
- {PE_5, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PE_6, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
-
- {PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PE_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
- {PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PE_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
-
- {PH_13, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PH_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PH_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
-
- {PI_2, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
- {PI_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
- {PI_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
- {PI_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PE_1, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
- {PE_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PE_0, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
- {PE_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {PG_9, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
-// {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)}, // error in datasheet?
- {PE_6, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PF_11, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PG_14, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
- {PI_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PE_5, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PG_12, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
- {PH_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PH_5, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PI_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PE_2, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PG_13, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
- {PH_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PI_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
- {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PE_4, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PG_8, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
- {PH_5, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
- {PI_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,317 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
-
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
-
-
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
-
- PJ_0 = 0x90,
- PJ_1 = 0x91,
- PJ_2 = 0x92,
- PJ_3 = 0x93,
- PJ_4 = 0x94,
- PJ_5 = 0x95,
- PJ_6 = 0x96,
- PJ_7 = 0x97,
- PJ_8 = 0x98,
- PJ_9 = 0x99,
- PJ_10 = 0x9A,
- PJ_11 = 0x9B,
- PJ_12 = 0x9C,
- PJ_13 = 0x9D,
- PJ_14 = 0x9E,
- PJ_15 = 0x9F,
-
-
- PK_0 = 0xA0,
- PK_1 = 0xA1,
- PK_2 = 0xA2,
- PK_3 = 0xA3,
- PK_4 = 0xA4,
- PK_5 = 0xA5,
- PK_6 = 0xA6,
- PK_7 = 0xA7,
-
- // Arduino connector namings
-/*
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-*/
-
- // Generic signals namings
- LED1 = PG_13,
- LED2 = PG_14,
- LED3 = PG_13,
- LED4 = PG_14,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_9,
- SERIAL_RX = PA_10,
- USBTX = PA_9,
- USBRX = PA_10,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PA_4,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,54 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8,
- PortJ = 9,
- PortK = 10
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,71 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 1 -#define LED_RED LED1 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F429ZI/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct dac_s {
- DACName dac;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ELMO_F411RE/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_9
-#define STDIO_UART_RX PA_10
-#define STDIO_UART UART_1
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE, ELMO_RF_SPI2 = SPI_1,
- SPI_2 = (int)SPI2_BASE, ELMO_SPI1 = SPI_2,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ELMO_F411RE/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,205 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
-// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
-// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM1, 1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
-// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ELMO_F411RE/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,196 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Not connected
- NC = (int)0xFFFFFFFF,
-
- // Arduino connector namings
- A0 = PC_0,
- A1 = PC_1,
- A2 = PC_2,
- A3 = PC_3,
- A4 = NC,
- A5 = NC,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_1,
- D3 = PA_0,
- D4 = NC,
- D5 = NC,
- D6 = NC,
- D7 = NC,
- D8 = NC,
- D9 = NC,
- D10 = PB_12,
- D11 = PB_15,
- D12 = PB_14,
- D13 = PB_13,
- D14 = PC_9,
- D15 = PA_8,
-
- // Generic signals namings
- LED1 = PB_0,
- LED2 = PB_1,
- LED3 = PB_0,
- LED4 = PB_1,
- USER_BUTTON = PB_7,
- SERIAL_TX = PA_9,
- SERIAL_RX = PA_10,
- USBTX = PA_9,
- USBRX = PA_10,
- I2C_SCL = D15,
- I2C_SDA = D14,
- SPI_MOSI = D11,
- SPI_MISO = D12,
- SPI_SCK = D13,
- SPI_CS = D10,
- RF_SPI_MOSI = PA_7,
- RF_SPI_MISO = PA_6,
- RF_SPI_SCK = PA_5,
- RF_SPI_CS = PA_4,
- RF_RESET = PC_4,
- RF_DIO0 = PC_10,
- RF_DIO1 = PC_11,
- RF_DIO2 = PC_12,
- RF_DIO3 = PD_2,
- RF_DIO4 = PB_5,
- RF_DIO5 = PB_6,
- RF_RXTX_SW = PC_13
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ELMO_F411RE/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ELMO_F411RE/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_ELMO_F411RE/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,108 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PB_6
-#define STDIO_UART_RX PB_7
-#define STDIO_UART UART_1
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,205 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
-// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
-// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10,1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
-// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,221 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PC_2,
- A1 = PC_0,
- A2 = PC_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_9,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PB_15,
- D3 = PA_0,
- D4 = PA_7,
- D5 = PA_9,
- D6 = PA_1,
- D7 = PA_8,
- D8 = PB_1,
- D9 = PB_13,
- D10 = PC_8,
- D11 = PB_5,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = D3,
- LED2 = D3,
- LED3 = D3,
- LED4 = D3,
- SERIAL_TX = D1,
- SERIAL_RX = D0,
- SERIAL_RTS = A1,
- SERIAL_CTS = A0,
- SERIAL_DCD = D5,
- SERIAL_DSR = D8,
- SERIAL_DTR = D4,
- SERIAL_RI = D9,
- USBTX = PB_6,
- USBRX = PB_7,
- RADIO_TX = PC_7,
- RADIO_RX = PC_6,
- RADIO_RTS = PB_10,
- RADIO_CTS = PB_12,
- RADIO_DCD = D5,
- RADIO_DSR = D8,
- RADIO_DTR = D4,
- RADIO_RI = D9,
-
- // I2C1 and I2C3 are available on Arduino pins
- I2C1_SCL = D15,
- I2C1_SDA = D14,
- I2C3_SCL = D7,
- I2C3_SDA = A5,
-
- // legacy definitions
- I2C_SCL = I2C1_SCL,
- I2C_SDA = I2C1_SDA,
-
- // SPI1 and SPI2 are available on Arduino pins
- SPI1_MOSI = D11,
- SPI1_MISO = D12,
- SPI1_SCK = D13,
- SPI2_MOSI = D2,
- SPI2_MISO = A0,
- SPI2_SCK = D9,
-
- // SPI3 connects to flash part
- SPI3_MOSI = PC_12,
- SPI3_MISO = PC_11,
- SPI3_SCK = PC_10,
-
- // legacy definitions
- SPI_MOSI = SPI3_MOSI,
- SPI_MISO = SPI3_MISO,
- SPI_SCK = SPI3_SCK,
- SPI_CS1 = PA_4,
- SPI_CS2 = PB_14,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,108 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,94 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE,
- PWM_12 = (int)TIM12_BASE,
- PWM_13 = (int)TIM13_BASE,
- PWM_14 = (int)TIM14_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,215 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_0, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10,1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
- {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,160 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Generic signals namings
- LED1 = PA_9,
- LED2 = PA_9,
- LED3 = PA_9,
- LED4 = PA_9,
- SERIAL_TX = PA_9,
- SERIAL_RX = PA_10,
- I2C_SCL = PA_8,
- I2C_SDA = PC_9,
- SPI_MOSI = PC_12,
- SPI_MISO = PC_11,
- SPI_SCK = PC_10,
- SPI_CS = PC_13,
- PWM0 = PA_8,
- PWM1 = PC_9,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,52 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct dac_s {
- DACName dac;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_9
-#define STDIO_UART_RX PA_10
-#define STDIO_UART UART_1
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,205 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
-// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
-// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10,1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
-// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,218 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Generic signals namings
- XBEE_DOUT = PA_2,
- XBEE_DIN = PA_3,
- XBEE_AD0 = PB_1,
- XBEE_AD1 = PB_0,
- XBEE_AD2 = PA_5,
- XBEE_AD3 = PA_4,
- XBEE_AD4 = PA_7,
- XBEE_AD5 = PC_1,
- XBEE_AD6 = PA_1,
- XBEE_DIO0 = PB_1,
- XBEE_DIO1 = PB_0,
- XBEE_DIO2 = PA_5,
- XBEE_DIO3 = PA_4,
- XBEE_DIO4 = PA_7,
- XBEE_DIO5 = PC_1,
- XBEE_DIO6 = PA_1,
- XBEE_DO8 = PA_6,
- XBEE_DI8 = PA_11,
- XBEE_PWM0 = PA_8,
- XBEE_PWM1 = PC_9,
- XBEE_CTS = PA_0,
- XBEE_RTS = PA_1,
- XBEE_DTR = PA_11,
- XBEE_RSSI = PA_8,
- XBEE_SLEEPRQ = PA_11,
- XBEE_ON_SLEEP = PC_13,
- XBEE_ASSOCIATE = PC_1,
- XBEE_USB_RES = PA_12,
-
- // needed for mbed to build tests
- LED1 = PA_0,
-
- // XBEE_DOUT/DIN, RS232 port on UDK board
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
-
- // DB_TX/RX, USB port on UDK board
- DB_TX = PA_9,
- DB_RX = PA_10,
- USBTX = PA_9,
- USBRX = PA_10,
-
- // Multiplexed with XBEE pins
- I2C_SCL = PA_8,
- I2C_SDA = PC_9,
- SPI1_MOSI = PA_7,
- SPI1_MISO = PA_6,
- SPI1_SCK = PA_5,
- SPI1_CS = PA_4,
-
- // SPI flash
- SPI3_MOSI = PC_12,
- SPI3_MISO = PC_11,
- SPI3_SCK = PC_10,
- SPI3_CS = PC_6,
- FLASH_HOLD = PC_7,
- FLASH_WP = PC_8,
-
- // LoRa
- LORA_RESET = PC_0,
- LORA_RXCTL = PC_2,
- LORA_TXCTL = PC_3,
- LORA_DIO0 = PB_5,
- LORA_DIO1 = PB_6,
- LORA_DIO2 = PB_7,
- LORA_DIO3 = PB_8,
- LORA_DIO4 = PB_9,
- LORA_DIO5 = PB_10,
- // LoRa/SPI2
- LORA_NSS = PB_12,
- LORA_SCK = PB_13,
- LORA_MISO = PB_14,
- LORA_MOSI = PB_15,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,108 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,81 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,190 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,186 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,71 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 1 -#define LED_RED LED1 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,108 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,205 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
-// {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // Warning: also on SCL
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
-// {PB_9, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM1, 1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO
- {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF7_SPI3)}, // Warning: also on NSS
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)},
- {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Warning: also on SCLK
-// {PB_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI4)}, // Warning: also on SCLK
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,185 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,71 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 1 -#define LED_RED LED1 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,108 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,92 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE,
- PWM_12 = (int)TIM12_BASE,
- PWM_13 = (int)TIM13_BASE,
- PWM_14 = (int)TIM14_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,234 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 - ARDUINO A0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - ARDUINO A1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - ARDUINO A2
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 - ARDUINO A3
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 - ARDUINO A5
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 - ARDUINO A4
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
- {NC, NC, 0}
-};
-
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14
- {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PC_12, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D15
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PA_6, PWM_13,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13,1, 0)}, // TIM13_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO D11
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
-// {PA_7, PWM_14,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14,1, 0)}, // TIM14_CH1
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- {PB_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO D3
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D5
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO D10
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM1, 1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO D6
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
-// {PB_14, PWM_12,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
-// {PB_15, PWM_12,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D9
-// {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
-
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D11
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
- {PB_2, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
- {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
-// {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
-// {PC_1, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D12
-// {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D13
- {PA_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
-// {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
-// {PB_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,185 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,51 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,71 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 1 -#define LED_RED LED1 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446RE/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct dac_s {
- DACName dac;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,98 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
- UART_7 = (int)UART7_BASE,
- UART_8 = (int)UART8_BASE
-} UARTName;
-
-#define STDIO_UART_TX PD_8
-#define STDIO_UART_RX PD_9
-#define STDIO_UART UART_3
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE,
- PWM_12 = (int)TIM12_BASE,
- PWM_13 = (int)TIM13_BASE,
- PWM_14 = (int)TIM14_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,167 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
-
- {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
- {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
- {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6
- {PF_9, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
- {PF_10,ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8
- {PF_3, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9
- {PF_4, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14
- {PF_5, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM5 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
-// {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
-// {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - ARDUINO
-// {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-
- {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_8, PWM_10,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10,1, 0)}, // TIM10_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_11,STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11,1, 0)}, // TIM11_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-
- {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO
- {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,212 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03,
- PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07,
- PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B,
- PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F,
-
- PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13,
- PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17,
- PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B,
- PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F,
-
- PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23,
- PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27,
- PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B,
- PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F,
-
- PD_0 = 0x30, PD_1 = 0x31, PD_2 = 0x32, PD_3 = 0x33,
- PD_4 = 0x34, PD_5 = 0x35, PD_6 = 0x36, PD_7 = 0x37,
- PD_8 = 0x38, PD_9 = 0x39, PD_10 = 0x3A, PD_11 = 0x3B,
- PD_12 = 0x3C, PD_13 = 0x3D, PD_14 = 0x3E, PD_15 = 0x3F,
-
- PE_0 = 0x40, PE_1 = 0x41, PE_2 = 0x42, PE_3 = 0x43,
- PE_4 = 0x44, PE_5 = 0x45, PE_6 = 0x46, PE_7 = 0x47,
- PE_8 = 0x48, PE_9 = 0x49, PE_10 = 0x4A, PE_11 = 0x4B,
- PE_12 = 0x4C, PE_13 = 0x4D, PE_14 = 0x4E, PE_15 = 0x4F,
-
- PF_0 = 0x50, PF_1 = 0x51, PF_2 = 0x52, PF_3 = 0x53,
- PF_4 = 0x54, PF_5 = 0x55, PF_6 = 0x56, PF_7 = 0x57,
- PF_8 = 0x58, PF_9 = 0x59, PF_10 = 0x5A, PF_11 = 0x5B,
- PF_12 = 0x5C, PF_13 = 0x5D, PF_14 = 0x5E, PF_15 = 0x5F,
-
- PG_0 = 0x60, PG_1 = 0x61, PG_2 = 0x62, PG_3 = 0x63,
- PG_4 = 0x64, PG_5 = 0x65, PG_6 = 0x66, PG_7 = 0x67,
- PG_8 = 0x68, PG_9 = 0x69, PG_10 = 0x6A, PG_11 = 0x6B,
- PG_12 = 0x6C, PG_13 = 0x6D, PG_14 = 0x6E, PG_15 = 0x6F,
-
- PH_0 = 0x70, PH_1 = 0x71, PH_2 = 0x72, PH_3 = 0x73,
- PH_4 = 0x74, PH_5 = 0x75, PH_6 = 0x76, PH_7 = 0x77,
- PH_8 = 0x78, PH_9 = 0x79, PH_10 = 0x7A, PH_11 = 0x7B,
- PH_12 = 0x7C, PH_13 = 0x7D, PH_14 = 0x7E, PH_15 = 0x7F,
-
- // Module Pins
- // A
- P_A5 = PC_2, // UART-DTR
- P_A6 = PF_2, // Switch-0
- P_A7 = PE_0, // Red, Mode
- P_A8 = PB_6, // Green, Switch-1
- P_A9 = PB_8, // Blue
- P_A10 = PA_11, // UART-CTS
- P_A11 = PA_9, // UART-TXD
- P_A12 = PA_12, // UART-RTS
- P_A13 = PA_10, // UART-RXD
- P_A14 = PD_9, // GPIO-0
- P_A15 = PD_8, // GPIO-1
- P_A16 = PD_11, // GPIO-2
- P_A17 = PD_12, // GPIO-3
- P_A18 = PA_3, // UART-DSR
- // B
- // C
- P_C5 = PG_4, // SPI-IRQ
- P_C6 = PE_13, // SPI-MISO
- P_C8 = PE_12, // Res
- P_C10 = PE_14, // SPI-MOSI
- P_C11 = PE_11, // SPI-CS0
- P_C12 = PE_9, // Res
- P_C13 = PF_6, // GPIO-4
- P_C14 = PC_1, // RMII-MDC
- P_C15 = PA_2, // RMII-MDIO
- P_C16 = PF_7, // GPIO-7
- P_C17 = PF_1, // I2C-SCL
- P_C18 = PF_0, // I2C-SDA
- // D
- P_D1 = PB_12, // RMII-TXD0
- P_D2 = PB_13, // RMII-TXD1
- P_D3 = PB_11, // RMII-TXEN
- P_D4 = PA_7, // RMII-CRSDV
- P_D5 = PC_4, // RMII-RXD0
- P_D6 = PC_5, // RMII-RXD1
- P_D8 = PA_1, // RMII-REFCLK
- // TP
- P_TP5 = PB_4, // NTRST
- P_TP7 = PA_13, // TMS SWDIO
- P_TP8 = PA_15, // TDI
- P_TP9 = PA_14, // TCK SWCLK
- P_TP10 = PB_3, // TDO
- //P_TP11, // BOOT0
-
- // Board Pins
- // A0-A5
- A0 = PF_6, // AI4
- A1 = PA_3, // AI3
- A2 = PC_2, // AI12
- A3 = PF_7, // LPOCLK, not AI
- A4 = PG_4, // not AI
- A5 = PB_3, // not AI
- // D0-D15
- D0 = PD_9, // UART3-RX
- D1 = PD_8, // UART3-TX
- D2 = PA_10, // UART1-RX
- D3 = PA_11, // CAN1-RX
- D4 = PA_12, // CAN1-TX
- D5 = PA_15,
- D6 = PD_11, // UART3-CTS
- D7 = PD_12, // UART3-RTS
- D8 = PA_9, // UART1-TX
- D9 = PE_9, // SDCard-CS
- D10 = PE_11, // SSEL
- D11 = PE_14, // MOSI
- D12 = PE_13, // MISO
- D13 = PE_12, // SCK
- D14 = PF_0, // SDA
- D15 = PF_1, // SCL
- // Internal
- LED_RED = PE_0, // Red / Mode
- LED_GRE = PB_6, // Green / Switch-1
- LED_BLU = PB_8, // Blue
- SW0 = PF_2, // Switch-0
- SW1 = PB_6, // Green / Switch-1
- // ST-Link
- USBRXD = PD_9,
- USBTXD = PD_8,
- SWDIO = PA_15,
- SWCLK = PA_14,
- NTRST = PB_4,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,54 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8,
- PortJ = 9,
- PortK = 10
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 0 // MAMM Not present on this module 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,113 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct dac_s {
- DACName dac;
- uint8_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/analogin_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,174 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Get the functions (adc channel) from the pin and assign it to the object
- uint32_t function = pinmap_function(pin, PinMap_ADC);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __ADC1_CLK_ENABLE();
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
- AdcHandle.Init.Resolution = ADC_RESOLUTION12b;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
- HAL_ADC_Init(&AdcHandle);
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig;
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
- sConfig.Offset = 0;
-
- switch (obj->channel) {
- case 0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case 1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case 2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case 3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case 4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case 5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case 6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case 7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case 8:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case 9:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case 10:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case 11:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case 12:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case 13:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case 14:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case 15:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- default:
- return 0;
- }
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/analogout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,158 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "stm32f4xx_hal.h"
-#include "PeripheralPins.h"
-
-#define RANGE_12BIT (0xFFF)
-
-DAC_HandleTypeDef DacHandle;
-static DAC_ChannelConfTypeDef sConfig;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- uint32_t channel ;
- HAL_StatusTypeDef status;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
- // Get the functions (dac channel) from the pin and assign it to the object
- uint32_t function = pinmap_function(pin, PinMap_DAC);
- MBED_ASSERT(function != (uint32_t)NC);
- // Save the channel for the write and read functions
- obj->channel = STM_PIN_CHANNEL(function);
-
- if (obj->dac == (DACName)NC) {
- error("DAC pin mapping failed");
- }
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- __GPIOA_CLK_ENABLE();
-
- __DAC_CLK_ENABLE();
-
- DacHandle.Instance = DAC;
-
- status = HAL_DAC_Init(&DacHandle);
- if ( status != HAL_OK ) {
- error("HAL_DAC_Init failed");
- }
-
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
-
- if (obj->channel == 1) {
- channel = DAC_CHANNEL_1;
- } else {
- channel = DAC_CHANNEL_2;
- }
-
- if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
- error("HAL_DAC_ConfigChannel failed");
- }
-
- if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
- error("HAL_DAC_Start failed");
- }
-
- if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
- error("HAL_DAC_SetValue failed");
- }
-
-}
-
-void analogout_free(dac_t *obj)
-{
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- if (obj->channel == 1) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- } else if (obj->channel == 2) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- }
-
- if ( status != HAL_OK ) {
- error("DAC pin mapping failed");
- }
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->channel == 1) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- } else if (obj->channel == 2) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
- return 0; /* Just silented warning */
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)RANGE_12BIT); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)RANGE_12BIT));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)RANGE_12BIT) {
- value = (uint16_t)RANGE_12BIT; // Max value
- }
-
- dac_write(obj, value);
-}
-
-float analogout_read(dac_t *obj)
-{
-
- uint32_t value = dac_read(obj);
- return (float)value * (1.0f / (float)RANGE_12BIT);
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,76 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set_clr = &gpio->BSRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_irq_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,332 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
-#define CHANNEL_NUM (7)
-
-// Max pins for one line (max with EXTI10_15)
-#define MAX_PIN_LINE (6)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0
- 0, // pin 0
- // EXTI1
- 0, // pin 1
- // EXTI2
- 0, // pin 2
- // EXTI3
- 0, // pin 3
- // EXTI4
- 0, // pin 4
- // EXTI5_9
- 0, // pin 5
- 1, // pin 6
- 2, // pin 7
- 3, // pin 8
- 4, // pin 9
- // EXTI10_15
- 0, // pin 10
- 1, // pin 11
- 2, // pin 12
- 3, // pin 13
- 4, // pin 14
- 5 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 1);
-}
-
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 1);
-}
-
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 1);
-}
-
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3, 1);
-}
-
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4, 1);
-}
-
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5, 5);
-}
-
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6, 6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/gpio_object.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,74 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set_clr = obj->mask;
- } else {
- *obj->reg_set_clr = obj->mask << 16;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/i2c_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,495 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-int i2c2_inited = 0;
-int i2c3_inited = 0;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- // Enable I2C3 clock and pinout if not done
- if ((obj->i2c == I2C_3) && !i2c3_inited) {
- i2c3_inited = 1;
- __I2C3_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-
- // I2C master by default
- obj->slave = 0;
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz != 0) && (hz <= 400000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.ClockSpeed = hz;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
- I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- HAL_I2C_Init(&I2cHandle);
- if (obj->slave) {
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR1 |= I2C_CR1_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR1 |= I2C_CR1_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_READ(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- // Read all bytes except last one
- for (count = 0; count < (length - 1); count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // If not repeated start, send stop.
- // Warning: must be done BEFORE the data is read.
- if (stop) {
- i2c_stop(obj);
- }
-
- // Read the last byte
- value = i2c_byte_read(obj, 1);
- data[count] = (char)value;
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- i2c_start(obj);
-
- // Wait until SB flag is set
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_SB) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- i2c->DR = __HAL_I2C_7BIT_ADD_WRITE(address);
-
-
- // Wait address is acknowledged
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- __HAL_I2C_CLEAR_ADDRFLAG(&I2cHandle);
-
- for (count = 0; count < length; count++) {
- if (i2c_byte_write(obj, data[count]) != 1) {
- i2c_stop(obj);
- return -1;
- }
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- if (last) {
- // Don't acknowledge the last byte
- i2c->CR1 &= ~I2C_CR1_ACK;
- } else {
- // Acknowledge the byte
- i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->DR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- i2c->DR = (uint8_t)data;
-
- // Wait until the byte is transmitted
- timeout = FLAG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) &&
- (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == RESET)) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __I2C2_FORCE_RESET();
- __I2C2_RELEASE_RESET();
- }
- if (obj->i2c == I2C_3) {
- __I2C3_FORCE_RESET();
- __I2C3_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg = 0;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- if (enable_slave) {
- obj->slave = 1;
- /* Enable Address Acknowledge */
- I2cHandle.Instance->CR1 |= I2C_CR1_ACK;
- }
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TRA) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until RXNE flag is set */
- // Wait until the byte is received
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Read data from DR */
- (*data++) = I2cHandle.Instance->DR;
- length--;
- size++;
- }
- }
-
- /* Wait until STOP flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- /* Clear STOP flag */
- __HAL_I2C_CLEAR_STOPFLAG(&I2cHandle);
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- uint32_t Timeout;
- int size = 0;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- while (length > 0) {
- /* Wait until TXE flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXE) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
-
- if ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BTF) == SET) && (length != 0)) {
- /* Write data to DR */
- I2cHandle.Instance->DR = (*data++);
- length--;
- size++;
- }
- }
-
- /* Wait until AF flag is set */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_AF) == RESET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
-
- /* Wait until BUSY flag is reset */
- Timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == SET) {
- Timeout--;
- if (Timeout == 0) {
- return -1;
- }
- }
-
- I2cHandle.State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(&I2cHandle);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/mbed_overrides.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,37 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/pinmap.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,181 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
-#if defined GPIOD_BASE
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOE_BASE
- case PortE:
- gpio_add = GPIOE_BASE;
- __GPIOE_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOF_BASE
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOG_BASE
- case PortG:
- gpio_add = GPIOG_BASE;
- __GPIOG_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOH_BASE
- case PortH:
- gpio_add = GPIOH_BASE;
- __GPIOH_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOI_BASE
- case PortI:
- gpio_add = GPIOI_BASE;
- __GPIOI_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOJ_BASE
- case PortJ:
- gpio_add = GPIOJ_BASE;
- __GPIOJ_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOK_BASE
- case PortK:
- gpio_add = GPIOK_BASE;
- __GPIOK_CLK_ENABLE();
- break;
-#endif
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/port_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/pwmout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,249 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
- MBED_ASSERT(obj->pwm != (PWMName)NC);
-
- // Get the functions (timer channel, (non)inverted) from the pin and assign it to the object
- uint32_t function = pinmap_function(pin, PinMap_PWM);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
- obj->inverted = STM_PIN_INVERTED(function);
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __HAL_RCC_TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __HAL_RCC_TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __HAL_RCC_TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __HAL_RCC_TIM4_CLK_ENABLE();
-#if defined(TIM8_BASE)
- if (obj->pwm == PWM_8) __HAL_RCC_TIM8_CLK_ENABLE();
-#endif
- if (obj->pwm == PWM_9) __HAL_RCC_TIM9_CLK_ENABLE();
- if (obj->pwm == PWM_10) __HAL_RCC_TIM10_CLK_ENABLE();
- if (obj->pwm == PWM_11) __HAL_RCC_TIM11_CLK_ENABLE();
-#if defined(TIM12_BASE)
- if (obj->pwm == PWM_12) __HAL_RCC_TIM12_CLK_ENABLE();
-#endif
-#if defined(TIM13_BASE)
- if (obj->pwm == PWM_13) __HAL_RCC_TIM13_CLK_ENABLE();
-#endif
-#if defined(TIM14_BASE)
- if (obj->pwm == PWM_14) __HAL_RCC_TIM14_CLK_ENABLE();
-#endif
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->channel) {
- case 1:
- channel = TIM_CHANNEL_1;
- break;
- case 2:
- channel = TIM_CHANNEL_2;
- break;
- case 3:
- channel = TIM_CHANNEL_3;
- break;
- case 4:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- if (HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel) != HAL_OK) {
- error("Cannot initialize PWM\n");
- }
-
- if (obj->inverted) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
- RCC_ClkInitTypeDef RCC_ClkInitStruct;
- uint32_t PclkFreq;
- uint32_t APBxCLKDivider;
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Get clock configuration
- // Note: PclkFreq contains here the Latency (not used after)
- HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
-
- // Get the PCLK and APBCLK divider related to the timer
- switch (obj->pwm) {
-
- // APB1 clock
- case PWM_2:
- case PWM_3:
- case PWM_4:
- case PWM_5:
-#if defined(TIM12_BASE)
- case PWM_12:
-#endif
-#if defined(TIM13_BASE)
- case PWM_13:
-#endif
-#if defined(TIM14_BASE)
- case PWM_14:
-#endif
- PclkFreq = HAL_RCC_GetPCLK1Freq();
- APBxCLKDivider = RCC_ClkInitStruct.APB1CLKDivider;
- break;
-
- // APB2 clock
- case PWM_1:
-#if defined(TIM8_BASE)
- case PWM_8:
-#endif
- case PWM_9:
- case PWM_10:
- case PWM_11:
- PclkFreq = HAL_RCC_GetPCLK2Freq();
- APBxCLKDivider = RCC_ClkInitStruct.APB2CLKDivider;
- break;
- default:
- return;
- }
-
- TimHandle.Init.Period = us - 1;
- // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
- if (APBxCLKDivider == RCC_HCLK_DIV1)
- TimHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 us tick
- else
- TimHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 us tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
-
- if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
- error("Cannot initialize PWM\n");
- }
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/rtc_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,203 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; /* Mandatory, otherwise the PLL is reconfigured! */
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; /* External 32.768 kHz clock on OSC_IN/OSC_OUT */
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/serial_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,482 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-#include "mbed_error.h"
-
-#define UART_NUM (8)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0, 0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- if (HAL_UART_Init(&UartHandle) != HAL_OK) {
- error("Cannot initialize UART");
- }
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- switch (obj->uart) {
- case UART_1:
- __HAL_RCC_USART1_CLK_ENABLE();
- obj->index = 0;
- break;
- case UART_2:
- __HAL_RCC_USART2_CLK_ENABLE();
- obj->index = 1;
- break;
-#if defined(USART3_BASE)
- case UART_3:
- __HAL_RCC_USART3_CLK_ENABLE();
- obj->index = 2;
- break;
-#endif
-#if defined(UART4_BASE)
- case UART_4:
- __HAL_RCC_UART4_CLK_ENABLE();
- obj->index = 3;
- break;
-#endif
-#if defined(UART5_BASE)
- case UART_5:
- __HAL_RCC_UART5_CLK_ENABLE();
- obj->index = 4;
- break;
-#endif
-#if defined(USART6_BASE)
- case UART_6:
- __HAL_RCC_USART6_CLK_ENABLE();
- obj->index = 5;
- break;
-#endif
-#if defined(UART7_BASE)
- case UART_7:
- __HAL_RCC_UART7_CLK_ENABLE();
- obj->index = 6;
- break;
-#endif
-#if defined(UART8_BASE)
- case UART_8:
- __HAL_RCC_UART8_CLK_ENABLE();
- obj->index = 7;
- break;
-#endif
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- switch (obj->uart) {
- case UART_1:
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- break;
- case UART_2:
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- break;
-#if defined(USART3_BASE)
- case UART_3:
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- break;
-#endif
-#if defined(UART4_BASE)
- case UART_4:
- __UART4_FORCE_RESET();
- __UART4_RELEASE_RESET();
- __UART4_CLK_DISABLE();
- break;
-#endif
-#if defined(UART5_BASE)
- case UART_5:
- __UART5_FORCE_RESET();
- __UART5_RELEASE_RESET();
- __UART5_CLK_DISABLE();
- break;
-#endif
-#if defined(USART6_BASE)
- case UART_6:
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- break;
-#endif
-#if defined(UART7_BASE)
- case UART_7:
- __UART7_FORCE_RESET();
- __UART7_RELEASE_RESET();
- __UART7_CLK_DISABLE();
- break;
-#endif
-#if defined(UART8_BASE)
- case UART_8:
- __UART8_FORCE_RESET();
- __UART8_RELEASE_RESET();
- __UART8_CLK_DISABLE();
- break;
-#endif
- }
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-#if defined(USART3_BASE)
-static void uart3_irq(void)
-{
- uart_irq(UART_3, 2);
-}
-#endif
-
-#if defined(UART4_BASE)
-static void uart4_irq(void)
-{
- uart_irq(UART_4, 3);
-}
-#endif
-
-#if defined(UART5_BASE)
-static void uart5_irq(void)
-{
- uart_irq(UART_5, 4);
-}
-#endif
-
-#if defined(USART6_BASE)
-static void uart6_irq(void)
-{
- uart_irq(UART_6, 5);
-}
-#endif
-
-#if defined(UART7_BASE)
-static void uart7_irq(void)
-{
- uart_irq(UART_7, 6);
-}
-#endif
-
-#if defined(UART8_BASE)
-static void uart8_irq(void)
-{
- uart_irq(UART_8, 7);
-}
-#endif
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- switch (obj->uart) {
- case UART_1:
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- break;
-
- case UART_2:
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- break;
-#if defined(USART3_BASE)
- case UART_3:
- irq_n = USART3_IRQn;
- vector = (uint32_t)&uart3_irq;
- break;
-#endif
-#if defined(UART4_BASE)
- case UART_4:
- irq_n = UART4_IRQn;
- vector = (uint32_t)&uart4_irq;
- break;
-#endif
-#if defined(UART5_BASE)
- case UART_5:
- irq_n = UART5_IRQn;
- vector = (uint32_t)&uart5_irq;
- break;
-#endif
-#if defined(USART6_BASE)
- case UART_6:
- irq_n = USART6_IRQn;
- vector = (uint32_t)&uart6_irq;
- break;
-#endif
-#if defined(UART7_BASE)
- case UART_7:
- irq_n = UART7_IRQn;
- vector = (uint32_t)&uart7_irq;
- break;
-#endif
-#if defined(UART8_BASE)
- case UART_8:
- irq_n = UART8_IRQn;
- vector = (uint32_t)&uart8_irq;
- break;
-#endif
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->DR & 0x1FF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->DR = (uint32_t)(c & 0x1FF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/sleep.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM5;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/spi_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,430 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-#include "mbed_error.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- if (HAL_SPI_Init(&SpiHandle) != HAL_OK) {
- error("Cannot initialize SPI");
- }
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __HAL_RCC_SPI1_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_2) {
- __HAL_RCC_SPI2_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_3) {
- __HAL_RCC_SPI3_CLK_ENABLE();
- }
-
-#if defined SPI4_BASE
- if (obj->spi == SPI_4) {
- __HAL_RCC_SPI4_CLK_ENABLE();
- }
-#endif
-
-#if defined SPI5_BASE
- if (obj->spi == SPI_5) {
- __HAL_RCC_SPI5_CLK_ENABLE();
- }
-#endif
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel != NC) {
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- } else {
- obj->nss = SPI_NSS_SOFT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __HAL_RCC_SPI1_FORCE_RESET();
- __HAL_RCC_SPI1_RELEASE_RESET();
- __HAL_RCC_SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __HAL_RCC_SPI2_FORCE_RESET();
- __HAL_RCC_SPI2_RELEASE_RESET();
- __HAL_RCC_SPI2_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_3) {
- __HAL_RCC_SPI3_FORCE_RESET();
- __HAL_RCC_SPI3_RELEASE_RESET();
- __HAL_RCC_SPI3_CLK_DISABLE();
- }
-
-#if defined SPI4_BASE
- if (obj->spi == SPI_4) {
- __HAL_RCC_SPI4_FORCE_RESET();
- __HAL_RCC_SPI4_RELEASE_RESET();
- __HAL_RCC_SPI4_CLK_DISABLE();
- }
-#endif
-
-#if defined SPI5_BASE
- if (obj->spi == SPI_5) {
- __HAL_RCC_SPI5_FORCE_RESET();
- __HAL_RCC_SPI5_RELEASE_RESET();
- __HAL_RCC_SPI5_CLK_DISABLE();
- }
-#endif
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (obj->nss != SPI_NSS_SOFT) {
- obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
- }
-
- obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
-#if defined(TARGET_STM32F401RE) || defined(TARGET_STM32F401VC) || defined(TARGET_STM32F407VG)
- // Note: The frequencies are obtained with SPI1 clock = 84 MHz (APB2 clock)
- if (hz < 600000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 330 kHz
- } else if ((hz >= 600000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 656 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.3 MHz
- } else if ((hz >= 2000000) && (hz < 5000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2.6 MHz
- } else if ((hz >= 5000000) && (hz < 10000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 5.25 MHz
- } else if ((hz >= 10000000) && (hz < 21000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 10.5 MHz
- } else if ((hz >= 21000000) && (hz < 42000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 21 MHz
- } else { // >= 42000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 42 MHz
- }
-#elif defined(TARGET_STM32F405RG)
- // Note: The frequencies are obtained with SPI1 clock = 48 MHz (APB2 clock)
- if (obj->spi == SPI_1) {
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 187.5 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1500000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 0.75 MHz
- } else if ((hz >= 1500000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
- // Note: The frequencies are obtained with SPI2/3 clock = 48 MHz (APB1 clock)
- } else if ((obj->spi == SPI_2) || (obj->spi == SPI_3)) {
- if (hz < 375000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 187.5 kHz
- } else if ((hz >= 375000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1500000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 0.75 MHz
- } else if ((hz >= 1500000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
- }
-#elif defined(TARGET_STM32F411RE) || defined(TARGET_STM32F429ZI)
- // Values depend of PCLK2: 100 MHz
- if ((obj->spi == SPI_1) || (obj->spi == SPI_4) || (obj->spi == SPI_5)) {
- if (hz < 700000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 391 kHz
- } else if ((hz >= 700000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 781 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.56 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 3.13 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 6.25 MHz
- } else if ((hz >= 12000000) && (hz < 25000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 12.5 MHz
- } else if ((hz >= 25000000) && (hz < 50000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 25 MHz
- } else { // >= 50000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 50 MHz
- }
- }
- // Values depend of PCLK1: 50 MHz
- if ((obj->spi == SPI_2) || (obj->spi == SPI_3)) {
- if (hz < 400000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 195 kHz
- } else if ((hz >= 400000) && (hz < 700000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 391 kHz
- } else if ((hz >= 700000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 781 MHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.56 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3.13 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6.25 MHz
- } else if ((hz >= 12000000) && (hz < 25000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12.5 MHz
- } else { // >= 25000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 25 MHz
- }
- }
-#elif defined(TARGET_STM32F446RE)
- // Values depend of PCLK2: 90 MHz
- if ((obj->spi == SPI_1) || (obj->spi == SPI_4)) {
- if (hz < 700000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 352 kHz
- } else if ((hz >= 700000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 703 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.41 MHz
- } else if ((hz >= 3000000) && (hz < 5000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2.81 MHz
- } else if ((hz >= 5000000) && (hz < 11000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 5.63 MHz
- } else if ((hz >= 11000000) && (hz < 22000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 11.25 MHz
- } else if ((hz >= 22000000) && (hz < 45000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 22.5 MHz
- } else { // >= 45000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 45 MHz
- }
- }
- // Values depend of PCLK1: 45 MHz
- if ((obj->spi == SPI_2) || (obj->spi == SPI_3)) {
- if (hz < 350000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 176 kHz
- } else if ((hz >= 350000) && (hz < 700000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 352 kHz
- } else if ((hz >= 700000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 703 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.41 MHz
- } else if ((hz >= 3000000) && (hz < 5000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 2.81 MHz
- } else if ((hz >= 5000000) && (hz < 11000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 5.63 MHz
- } else if ((hz >= 11000000) && (hz < 22000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 11.25 MHz
- } else { // >= 22000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 22.5 MHz
- }
- }
-#endif
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- return (int)spi->DR;
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- spi->DR = (uint16_t)value;
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/us_ticker.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,88 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-typedef enum {
- ADC0_0 = 0,
- ADC0_1,
- ADC0_2,
- ADC0_3,
- ADC0_4,
- ADC0_5,
- ADC0_6,
- ADC0_7,
- ADC0_8,
- ADC0_9,
- ADC0_10,
- ADC0_11,
- ADC0_12,
- ADC0_13,
- ADC0_14,
- ADC0_15
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = 1,
- PWM_2,
- PWM_3,
- PWM_4,
- PWM_5,
- PWM_6
-} PWMName;
-
-typedef enum {
- CAN_1 = (int)CAN1_BASE,
- CAN_2 = (int)CAN2_BASE
-} CANName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, FUNC) (((MODE) << 8) | (FUNC))
-#define STM_PIN_MODE(X) ((X) >> 8)
-#define STM_PIN_FUNC(X) ((X) & 0xFF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 6
-
-typedef enum {
- // STM32 Pin Names
- PA_0 = 0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
- PB_0, PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
- PC_0, PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14, PC_15,
- PD_0, PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14, PD_15,
- PE_0, PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
- PF_0, PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11, PF_12, PF_13, PF_14, PF_15,
- PH_0, PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11,
-
- LED1 = PD_13,
- LED2 = PD_12,
- LED3 = PD_13,
- LED4 = PD_12,
- LED5 = PD_14,
- LED6 = PD_15,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullDown
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,38 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/analogin_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,96 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define ADC_10BIT_RANGE 0x3FF
-#define ADC_12BIT_RANGE 0xFFF
-
-static const PinMap PinMap_ADC[] = {
- {PA_0, ADC0_0, STM_PIN_DATA(3, 0)},
- {PA_1, ADC0_1, STM_PIN_DATA(3, 0)},
- {PA_2, ADC0_2, STM_PIN_DATA(3, 0)},
- {PA_3, ADC0_3, STM_PIN_DATA(3, 0)},
- {PA_4, ADC0_4, STM_PIN_DATA(3, 0)},
- {PA_5, ADC0_5, STM_PIN_DATA(3, 0)},
- {PA_6, ADC0_6, STM_PIN_DATA(3, 0)},
- {PA_7, ADC0_7, STM_PIN_DATA(3, 0)},
- {PB_0, ADC0_8, STM_PIN_DATA(3, 0)},
- {PB_1, ADC0_9, STM_PIN_DATA(3, 0)},
- {PC_0, ADC0_10, STM_PIN_DATA(3, 0)},
- {PC_1, ADC0_11, STM_PIN_DATA(3, 0)},
- {PC_2, ADC0_12, STM_PIN_DATA(3, 0)},
- {PC_3, ADC0_13, STM_PIN_DATA(3, 0)},
- {PC_4, ADC0_14, STM_PIN_DATA(3, 0)},
- {PC_5, ADC0_15, STM_PIN_DATA(3, 0)},
- {NC, NC, 0}
-};
-
-# define ADC_RANGE ADC_12BIT_RANGE
-
-void analogin_init(analogin_t *obj, PinName pin) {
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (uint32_t)NC);
-
- // ensure power is turned on
- RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN |
- RCC_AHB1ENR_GPIOCEN;
- RCC->APB2ENR |= RCC_APB2ENR_ADC1EN;
-
- // Enable the ADC
- ADC1->CR2 |= ADC_CR2_ADON;
-
- pinmap_pinout(pin, PinMap_ADC);
-}
-
-static inline uint32_t adc_read(analogin_t *obj) {
- // Select the appropriate channel
- ADC1->SQR3 = (int) obj->adc;
-
- // Start conversion
- ADC1->CR2 |= ADC_CR2_SWSTART;
-
- // Wait for conversion to finish
- while (!(ADC1->SR & ADC_SR_EOC));
-
- uint32_t data = ADC1->DR;
- return data; // 12 bit
-}
-
-static inline uint32_t adc_read_u32(analogin_t *obj) {
- uint32_t value;
- value = adc_read(obj);
- return value;
-}
-
-uint16_t analogin_read_u16(analogin_t *obj) {
- uint32_t value = adc_read_u32(obj);
-
- return (value << 4) | ((value >> 8) & 0x000F); // 12 bit
-}
-
-float analogin_read(analogin_t *obj) {
- uint32_t value = adc_read_u32(obj);
- return (float)value * (1.0f / (float)ADC_RANGE);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,48 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 0 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 - -#define DEVICE_SERIAL 0 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 0 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_CAN 0 - -#define DEVICE_RTC 0 - -#define DEVICE_ETHERNET 0 - -#define DEVICE_PWMOUT 0 - -#define DEVICE_SLEEP 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/gpio_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-
-uint32_t gpio_set(PinName pin) {
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = (uint32_t) pin >> 4;
-
- // Enable GPIO peripheral clock
- RCC->AHB1ENR |= 1 << port_index;
-
- pin_function(pin, STM_PIN_DATA(0, 0));
- return 1 << ((uint32_t) pin & 0xF);
-}
-
-void gpio_init(gpio_t *obj, PinName pin) {
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- obj->mask = gpio_set(pin);
-
- uint32_t port_index = (uint32_t) pin >> 4;
-
- GPIO_TypeDef *port_reg = (GPIO_TypeDef *) (GPIOA_BASE + (port_index << 10));
- obj->reg_mode = &port_reg->MODER;
- obj->reg_set = &port_reg->BSRRL;
- obj->reg_clr = &port_reg->BSRRH;
- obj->reg_in = &port_reg->IDR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode) {
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- switch (direction) {
- case PIN_INPUT :
- pin_function(obj->pin, STM_PIN_DATA(0, 0));
- break;
- case PIN_OUTPUT:
- pin_function(obj->pin, STM_PIN_DATA(1, 0));
- break;
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/gpio_object.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,57 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
-
- __IO uint32_t *reg_mode;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
- __I uint32_t *reg_in;
- __O uint32_t *reg_out;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value)
- *obj->reg_set = obj->mask;
- else
- *obj->reg_clr = obj->mask;
-}
-
-static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj) {
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/i2c_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,294 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-static const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(2, 4)},
- {PB_9, I2C_1, STM_PIN_DATA(2, 4)},
- {PB_11, I2C_2, STM_PIN_DATA(2, 4)},
- {PC_9, I2C_3, STM_PIN_DATA(2, 4)},
- {PF_0, I2C_2, STM_PIN_DATA(2, 4)},
- {PH_5, I2C_2, STM_PIN_DATA(2, 4)},
- {PH_8, I2C_3, STM_PIN_DATA(2, 4)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_I2C_SCL[] = {
- {PA_8, I2C_3, STM_PIN_DATA(2, 4)},
- {PB_6, I2C_1, STM_PIN_DATA(2, 4)},
- {PB_8, I2C_1, STM_PIN_DATA(2, 4)},
- {PB_10, I2C_2, STM_PIN_DATA(2, 4)},
- {PF_1, I2C_2, STM_PIN_DATA(2, 4)},
- {PH_4, I2C_2, STM_PIN_DATA(2, 4)},
- {PH_7, I2C_3, STM_PIN_DATA(2, 4)},
- {NC, NC, 0}
-};
-
-static const uint32_t I2C_addr_offset[2][4] = {
- {0x0C, 0x20, 0x24, 0x28},
- {0x30, 0x34, 0x38, 0x3C}
-};
-
-
-static inline void i2c_interface_enable(i2c_t *obj) {
- obj->i2c->CR1 |= I2C_CR1_PE;
-}
-
-static inline void i2c_interface_disable(i2c_t *obj) {
- obj->i2c->CR1 &= ~I2C_CR1_PE;
-}
-
-
-static inline void i2c_power_enable(i2c_t *obj) {
- switch ((int)obj->i2c) {
- case I2C_1:
- RCC->AHB1ENR |= RCC_AHB1ENR_GPIOBEN;
- RCC->APB1ENR |= RCC_APB1ENR_I2C1EN;
- break;
- case I2C_2:
- RCC->AHB1ENR |= RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOFEN |
- RCC_AHB1ENR_GPIOHEN;
- RCC->APB1ENR |= RCC_APB1ENR_I2C2EN;
- break;
- case I2C_3:
- RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOCEN |
- RCC_AHB1ENR_GPIOHEN;
- RCC->APB1ENR |= RCC_APB1ENR_I2C3EN;
- break;
- }
-}
-
-static inline void i2c_wait_status(i2c_t *obj, uint32_t sr1_mask,
- uint32_t sr2_mask) {
- while (!(((obj->i2c->SR1 & sr1_mask) >= sr1_mask) &&
- ((obj->i2c->SR2 & sr2_mask) == sr2_mask)));
-}
-
-// Wait until the slave address has been acknowledged
-static inline void i2c_wait_addr_tx(i2c_t *obj) {
- uint32_t sr1_mask = I2C_SR1_ADDR | I2C_SR1_TXE;
- uint32_t sr2_mask = I2C_SR2_MSL | I2C_SR2_BUSY | I2C_SR2_TRA;
- i2c_wait_status(obj, sr1_mask, sr2_mask);
-}
-
-// Wait until the slave address has been acknowledged
-static inline void i2c_wait_addr_rx(i2c_t *obj) {
- uint32_t sr1_mask = I2C_SR1_ADDR;
- uint32_t sr2_mask = I2C_SR2_MSL | I2C_SR2_BUSY;
- i2c_wait_status(obj, sr1_mask, sr2_mask);
-}
-
-
-// Wait until a byte has been sent
-static inline void i2c_wait_send(i2c_t *obj) {
- uint32_t sr1_mask = I2C_SR1_BTF | I2C_SR1_TXE;
- uint32_t sr2_mask = I2C_SR2_MSL | I2C_SR2_BUSY | I2C_SR2_TRA;
- i2c_wait_status(obj, sr1_mask, sr2_mask);
-}
-
-// Wait until a byte has been received
-static inline void i2c_wait_receive(i2c_t *obj) {
- uint32_t sr1_mask = I2C_SR1_RXNE;
- uint32_t sr2_mask = I2C_SR2_MSL | I2C_SR2_BUSY;
- i2c_wait_status(obj, sr1_mask, sr2_mask);
-}
-
-// Wait until the start condition has been accepted
-static inline void i2c_wait_start(i2c_t *obj) {
- uint32_t sr1_mask = I2C_SR1_SB;
- uint32_t sr2_mask = I2C_SR2_MSL | I2C_SR2_BUSY;
- i2c_wait_status(obj, sr1_mask, sr2_mask);
-}
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
- // determine the SPI to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
- obj->i2c = (I2C_TypeDef *)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT((int)obj->i2c != NC);
-
- // enable power
- i2c_power_enable(obj);
-
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
-
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
-
- // Force reset if the bus is stuck in the BUSY state
- if (obj->i2c->SR2 & I2C_SR2_BUSY) {
- obj->i2c->CR1 |= I2C_CR1_SWRST;
- obj->i2c->CR1 &= ~I2C_CR1_SWRST;
- }
-
- // Set the peripheral clock frequency
- obj->i2c->CR2 |= 42;
-
- // set default frequency at 100k
- i2c_frequency(obj, 100000);
- i2c_interface_enable(obj);
-}
-
-inline int i2c_start(i2c_t *obj) {
- // Wait until we are not busy any more
- while (obj->i2c->SR2 & I2C_SR2_BUSY);
-
- // Generate the start condition
- obj->i2c->CR1 |= I2C_CR1_START;
- i2c_wait_start(obj);
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj) {
- // Generate the stop condition
- obj->i2c->CR1 |= I2C_CR1_STOP;
- return 0;
-}
-
-
-static inline int i2c_do_write(i2c_t *obj, int value, uint8_t addr) {
- obj->i2c->DR = value;
- return 0;
-}
-
-static inline int i2c_do_read(i2c_t *obj, int last) {
- if(last) {
- // Don't acknowledge the byte
- obj->i2c->CR1 &= ~(I2C_CR1_ACK);
- } else {
- // Acknowledge the byte
- obj->i2c->CR1 |= I2C_CR1_ACK;
- }
-
- // Wait until we receive the byte
- i2c_wait_receive(obj);
-
- int data = obj->i2c->DR;
- return data;
-}
-
-void i2c_frequency(i2c_t *obj, int hz) {
- i2c_interface_disable(obj);
- obj->i2c->CCR &= ~(I2C_CCR_CCR | I2C_CCR_FS);
- if (hz > 100000) {
- // Fast Mode
- obj->i2c->CCR |= I2C_CCR_FS;
- int result = 42000000 / (hz * 3);
- obj->i2c->CCR |= result & I2C_CCR_CCR;
- obj->i2c->TRISE = ((42 * 300) / 1000) + 1;
- }
- else {
- // Standard mode
- obj->i2c->CCR &= ~I2C_CCR_FS;
- int result = 42000000 / (hz << 1);
- result = result < 0x4 ? 0x4 : result;
- obj->i2c->CCR |= result & I2C_CCR_CCR;
- obj->i2c->TRISE = 42 + 1;
- }
- i2c_interface_enable(obj);
-}
-
-// The I2C does a read or a write as a whole operation
-// There are two types of error conditions it can encounter
-// 1) it can not obtain the bus
-// 2) it gets error responses at part of the transmission
-//
-// We tackle them as follows:
-// 1) we retry until we get the bus. we could have a "timeout" if we can not get it
-// which basically turns it in to a 2)
-// 2) on error, we use the standard error mechanisms to report/debug
-//
-// Therefore an I2C transaction should always complete. If it doesn't it is usually
-// because something is setup wrong (e.g. wiring), and we don't need to programatically
-// check for that
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
- int count;
-
- i2c_start(obj);
-
- // Send the slave address
- i2c_do_write(obj, (address | 0x01), 1);
-
- // Wait until we have transmitted and the ADDR byte is set
- i2c_wait_addr_rx(obj);
-
- // Read in all except last byte
- for (count = 0; count < (length - 1); count++) {
- int value = i2c_do_read(obj, 0);
- data[count] = (char) value;
- }
-
- // read in last byte
- int value = i2c_do_read(obj, 1);
- data[count] = (char) value;
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
- int i;
-
- i2c_start(obj);
-
- // Send the slave address
- i2c_do_write(obj, (address & 0xFE), 1);
- i2c_wait_addr_tx(obj);
-
- for (i=0; i<length; i++) {
- i2c_do_write(obj, data[i], 0);
- i2c_wait_send(obj);
- }
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- }
-
- return length;
-}
-
-void i2c_reset(i2c_t *obj) {
- i2c_stop(obj);
-}
-
-int i2c_byte_read(i2c_t *obj, int last) {
- return (i2c_do_read(obj, last) & 0xFF);
-}
-
-int i2c_byte_write(i2c_t *obj, int data) {
- i2c_do_write(obj, (data & 0xFF), 0);
- i2c_wait_send(obj);
-
- // TODO: Should return whether write has been acknowledged
- return 1;
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,81 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- uint32_t port;
- uint32_t pin;
- uint32_t ch;
-};
-
-struct port_s {
- __IO uint32_t *reg_mode;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
- PortName port;
- uint32_t mask;
- PinDirection direction;
-};
-
-struct pwmout_s {
- __IO uint32_t *MR;
- PWMName pwm;
-};
-
-struct serial_s {
- USART_TypeDef *uart;
- int index;
-};
-
-struct analogin_s {
- ADCName adc;
-};
-
-struct dac_s {
- DACName dac;
-};
-
-struct can_s {
- CAN_TypeDef *dev;
-};
-
-struct i2c_s {
- I2C_TypeDef *i2c;
-};
-
-struct spi_s {
- SPI_TypeDef *spi;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/pinmap.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,74 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-/**
- * Set the pin into input, output, alternate function or analog mode
- */
-void pin_function(PinName pin, int data) {
- MBED_ASSERT(pin != (PinName)NC);
-
- int mode = STM_PIN_MODE(data);
- int func = STM_PIN_FUNC(data);
-
- uint32_t pin_number = (uint32_t)pin;
- int port_index = pin_number >> 4;
- int pin_index = (pin_number & 0xF);
- GPIO_TypeDef * gpio = ((GPIO_TypeDef *) (GPIOA_BASE + (port_index << 10)));
-
- // MODE
- int offset = pin_index << 1;
- gpio->MODER &= ~(0x3 << offset);
- gpio->MODER |= mode << offset;
-
- // Set high-speed mode
- gpio->OSPEEDR &= ~(0x3 << offset);
- gpio->OSPEEDR |= (0x2 << offset);
-
- // FUNCTION
- // Bottom seven pins are in AFR[0], top seven in AFR[1]
- offset = (pin_index & 0x7) << 2;
- if (pin_index <= 0x7) {
- gpio->AFR[0] &= ~(0xF << offset);
- gpio->AFR[0] |= func << offset;
- }
- else {
- gpio->AFR[1] &= ~(0xF << offset);
- gpio->AFR[1] |= func << offset;
- }
-}
-
-void pin_mode(PinName pin, PinMode mode) {
- MBED_ASSERT(pin != (PinName)NC);
-
- uint32_t pin_number = (uint32_t)pin;
- int port_index = pin_number >> 4;
- int pin_index = (pin_number & 0xF);
- int offset = pin_index << 1;
-
- GPIO_TypeDef * gpio = ((GPIO_TypeDef *) (GPIOA_BASE + (port_index << 10)));
- if (mode == OpenDrain) {
- gpio->OTYPER |= 1 << pin_index;
- }
- else {
- gpio->OTYPER &= ~(1 << pin_index);
- gpio->PUPDR &= ~(0x3 << offset);
- gpio->PUPDR |= mode << offset;
- }
-}
-
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/port_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,83 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-PinName port_pin(PortName port, int pin_n) {
- return pin_n + (port << 4);
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir) {
- obj->port = port;
- obj->mask = mask;
-
- uint32_t port_index = (uint32_t) port;
-
- GPIO_TypeDef *port_reg = (GPIO_TypeDef *)(GPIOA_BASE + (port_index << 10));
- // Enable GPIO peripheral clock
- RCC->AHB1ENR |= 1 << port_index;
-
- obj->reg_mode = &port_reg->MODER;
- obj->reg_set = &port_reg->BSRRH;
- obj->reg_clr = &port_reg->BSRRL;
- obj->reg_in = &port_reg->IDR;
- obj->reg_out = &port_reg->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_mode(port_t *obj, PinMode mode) {
- uint32_t i;
- // The mode is set per pin: reuse pinmap logic
- for (i=0; i<16; i++) {
- if (obj->mask & (1<<i)) {
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_dir(port_t *obj, PinDirection dir) {
- obj->direction = dir;
- uint32_t tmp = *obj->reg_mode;
- for (int i=0; i<16; i++) {
- if (obj->mask & (1 << i)) {
- // Clear the mode bits (i.e. set to input)
- tmp &= ~(0x3 << (i << 1));
- if (dir == PIN_OUTPUT) {
- // Set to output
- tmp |= 0x1 << (i << 1);
- }
- }
- }
- *obj->reg_mode = tmp;
-}
-
-void port_write(port_t *obj, int value) {
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj) {
- switch (obj->direction) {
- case PIN_OUTPUT: return *obj->reg_out & obj->mask;
- case PIN_INPUT: return *obj->reg_in & obj->mask;
- }
- return 0;
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/spi_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,221 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-#include <math.h>
-
-#include "cmsis.h"
-#include "pinmap.h"
-
-static const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(2, 5)},
- {PB_3, SPI_1, STM_PIN_DATA(2, 5)},
- {PB_3, SPI_3, STM_PIN_DATA(2, 6)},
- {PB_10, SPI_2, STM_PIN_DATA(2, 5)},
- {PB_13, SPI_2, STM_PIN_DATA(2, 5)},
- {PC_10, SPI_3, STM_PIN_DATA(2, 6)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(2, 5)},
- {PB_5, SPI_1, STM_PIN_DATA(2, 5)},
- {PB_5, SPI_3, STM_PIN_DATA(2, 6)},
- {PB_15, SPI_2, STM_PIN_DATA(2, 5)},
- {PC_3, SPI_2, STM_PIN_DATA(2, 5)},
- {PC_12, SPI_3, STM_PIN_DATA(2, 6)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(2, 5)},
- {PB_4, SPI_1, STM_PIN_DATA(2, 5)},
- {PB_4, SPI_3, STM_PIN_DATA(2, 6)},
- {PB_14, SPI_2, STM_PIN_DATA(2, 5)},
- {PC_2, SPI_2, STM_PIN_DATA(2, 5)},
- {PC_11, SPI_3, STM_PIN_DATA(2, 6)},
- {NC, NC, 0}
-};
-
-static const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(2, 5)},
- {PA_4, SPI_3, STM_PIN_DATA(2, 6)},
- {PA_15, SPI_1, STM_PIN_DATA(2, 5)},
- {PA_15, SPI_3, STM_PIN_DATA(2, 6)},
- {PB_9, SPI_2, STM_PIN_DATA(2, 5)},
- {PB_12, SPI_2, STM_PIN_DATA(2, 5)},
- {NC, NC, 0}
-};
-
-
-static inline int ssp_disable(spi_t *obj);
-static inline int ssp_enable(spi_t *obj);
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
- // determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
- obj->spi = (SPI_TypeDef*)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT((int)obj->spi != NC);
-
- // enable power and clocking
- switch ((int)obj->spi) {
- case SPI_1:
- RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN;
- RCC->APB2ENR |= RCC_APB2ENR_SPI1EN;
- break;
- case SPI_2:
- RCC->AHB1ENR |= RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOCEN;
- RCC->APB1ENR |= RCC_APB1ENR_SPI2EN;
- break;
- case SPI_3:
- RCC->AHB1ENR |= RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOCEN;
- RCC->APB1ENR |= RCC_APB1ENR_SPI3EN;
- break;
- }
-
- // pin out the spi pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
- if (ssel != NC) {
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- } else {
- // Use software slave management
- obj->spi->CR1 |= SPI_CR1_SSM | SPI_CR1_SSI;
- }
-}
-
-void spi_free(spi_t *obj) {}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave) {
- MBED_ASSERT(((bits == 8) || (bits == 16)) && ((mode >= 0) && (mode <= 3)));
- ssp_disable(obj);
-
- int polarity = (mode & 0x2) ? 1 : 0;
- int phase = (mode & 0x1) ? 1 : 0;
-
- obj->spi->CR1 &= ~0x807;
- obj->spi->CR1 |= ((phase) ? 1 : 0) << 0 |
- ((polarity) ? 1 : 0) << 1 |
- ((slave) ? 0: 1) << 2 |
- ((bits == 16) ? 1 : 0) << 11;
-
- if (slave) {
- // Use software slave management
- obj->spi->CR1 |= SPI_CR1_SSM | SPI_CR1_SSI;
- }
-
- if (obj->spi->SR & SPI_SR_MODF) {
- obj->spi->CR1 = obj->spi->CR1;
- }
-
- ssp_enable(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz) {
- ssp_disable(obj);
-
- // SPI1 runs from PCLK2, which runs at SystemCoreClock / 2. SPI2 and SPI3
- // run from PCLK1, which runs at SystemCoreClock / 4.
- uint32_t PCLK = SystemCoreClock;
- switch ((int)obj->spi) {
- case SPI_1: PCLK = PCLK >> 1; break;
- case SPI_2: PCLK = PCLK >> 2; break;
- case SPI_3: PCLK = PCLK >> 2; break;
- }
-
- // Choose the baud rate divisor (between 2 and 256)
- uint32_t divisor = PCLK / hz;
-
- // Find the nearest power-of-2
- divisor = divisor > 0 ? divisor-1 : 0;
- divisor |= divisor >> 1;
- divisor |= divisor >> 2;
- divisor |= divisor >> 4;
- divisor |= divisor >> 8;
- divisor |= divisor >> 16;
- divisor++;
-
- uint32_t baud_rate = __builtin_ffs(divisor) - 1;
- baud_rate = baud_rate > 0x7 ? 0x7 : baud_rate;
-
- obj->spi->CR1 &= ~(0x7 << 3);
- obj->spi->CR1 |= baud_rate << 3;
-
- ssp_enable(obj);
-}
-
-static inline int ssp_disable(spi_t *obj) {
- // TODO: Follow the instructions in 25.3.8 for safely disabling the SPI
- return obj->spi->CR1 &= ~SPI_CR1_SPE;
-}
-
-static inline int ssp_enable(spi_t *obj) {
- return obj->spi->CR1 |= SPI_CR1_SPE;
-}
-
-static inline int ssp_readable(spi_t *obj) {
- return obj->spi->SR & SPI_SR_RXNE;
-}
-
-static inline int ssp_writeable(spi_t *obj) {
- return obj->spi->SR & SPI_SR_TXE;
-}
-
-static inline void ssp_write(spi_t *obj, int value) {
- while (!ssp_writeable(obj));
- obj->spi->DR = value;
-}
-
-static inline int ssp_read(spi_t *obj) {
- while (!ssp_readable(obj));
- return obj->spi->DR;
-}
-
-static inline int ssp_busy(spi_t *obj) {
- return (obj->spi->SR & SPI_SR_BSY) ? (1) : (0);
-}
-
-int spi_master_write(spi_t *obj, int value) {
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj) {
- return (ssp_readable(obj) && !ssp_busy(obj)) ? (1) : (0);
-};
-
-int spi_slave_read(spi_t *obj) {
- return obj->spi->DR;
-}
-
-void spi_slave_write(spi_t *obj, int value) {
- while (ssp_writeable(obj) == 0) ;
- obj->spi->DR = value;
-}
-
-int spi_busy(spi_t *obj) {
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/us_ticker.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,63 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define US_TICKER_TIMER TIM2
-#define US_TICKER_TIMER_IRQn TIM2_IRQn
-
-int us_ticker_inited = 0;
-
-void us_ticker_init(void) {
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
-
- uint32_t PCLK = SystemCoreClock / 4;
-
- uint32_t prescale = PCLK / 1000000; // default to 1MHz (1 us ticks)
- US_TICKER_TIMER->PSC = prescale - 1;
- US_TICKER_TIMER->CR1 |= TIM_CR1_CEN;
- // Trigger an update - this needs to happen after the counter is enabled.
- US_TICKER_TIMER->EGR |= TIM_EGR_UG;
-
- NVIC_SetVector(US_TICKER_TIMER_IRQn, (uint32_t)us_ticker_irq_handler);
- NVIC_EnableIRQ(US_TICKER_TIMER_IRQn);
-}
-
-uint32_t us_ticker_read() {
- if (!us_ticker_inited)
- us_ticker_init();
-
- return US_TICKER_TIMER->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp) {
- // set match value
- US_TICKER_TIMER->CCR1 = (uint32_t)timestamp;
- // enable compare interrupt
- US_TICKER_TIMER->DIER |= TIM_DIER_CC1IE;
-}
-
-void us_ticker_disable_interrupt(void) {
- US_TICKER_TIMER->DIER &= ~TIM_DIER_CC1IE;
-}
-
-void us_ticker_clear_interrupt(void) {
- US_TICKER_TIMER->SR &= ~TIM_SR_CC1IF;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/PeripheralPins.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,99 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
- UART_7 = (int)UART7_BASE,
- UART_8 = (int)UART8_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_9
-#define STDIO_UART_RX PB_7
-#define STDIO_UART UART_1
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE,
- SPI_6 = (int)SPI6_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE,
- I2C_4 = (int)I2C4_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE,
- PWM_12 = (int)TIM12_BASE,
- PWM_13 = (int)TIM13_BASE,
- PWM_14 = (int)TIM14_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =============================================================================
-// Notes:
-// * Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// * Only the pins that are placed on the Arduino connector are described.
-// =============================================================================
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0 - ARDUINO A0
- {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 - ARDUINO A5
- {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - ARDUINO A4
- {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 - ARDUINO A3
- {PF_9, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 - ARDUINO A2
- {PF_10, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 - ARDUINO A1
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D15
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - ARDUINO A0
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 - ARDUINO A0 (used by us_ticker)
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - ARDUINO D5
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - ARDUINO D9
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D3
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - ARDUINO D15
-// {PB_8, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM1, 1, 0)}, // TIM10_CH1 - ARDUINO D15
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - ARDUINO D14
-// {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO D14
-// {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - ARDUINO D12
-// {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - ARDUINO D12
- {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D12
-// {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - ARDUINO D11
-// {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - ARDUINO D11
- {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 - ARDUINO D11
-// {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D1
- {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 - ARDUINO D1
-// {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D0
- {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - ARDUINO D0
- {PF_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - ARDUINO A5
- {PF_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO A4
- {PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - ARDUINO A3
- {PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 - ARDUINO A2
- {PH_6, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D6
-// {PI_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 - ARDUINO D10 (used by us_ticker)
- {PI_2, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 - ARDUINO D8
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // ARDUINO A0
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Virtual Com Port
- {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D1
- {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO A4
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Virtual Com Port
- {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0
- {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO A5
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D11
- {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A2
- {PI_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D7
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D12
- {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A3
- {PI_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D8
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A4
- {PH_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D6
- {PI_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D13
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PB_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)}, // ARDUINO D3
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D14
- {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A5
- {PI_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D10
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,317 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7) |\
- ((CHANNEL & 0x0F) << 11) |\
- ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
- PJ_0 = 0x90,
- PJ_1 = 0x91,
- PJ_2 = 0x92,
- PJ_3 = 0x93,
- PJ_4 = 0x94,
- PJ_5 = 0x95,
- PJ_6 = 0x96,
- PJ_7 = 0x97,
- PJ_8 = 0x98,
- PJ_9 = 0x99,
- PJ_10 = 0x9A,
- PJ_11 = 0x9B,
- PJ_12 = 0x9C,
- PJ_13 = 0x9D,
- PJ_14 = 0x9E,
- PJ_15 = 0x9F,
-
- PK_0 = 0xA0,
- PK_1 = 0xA1,
- PK_2 = 0xA2,
- PK_3 = 0xA3,
- PK_4 = 0xA4,
- PK_5 = 0xA5,
- PK_6 = 0xA6,
- PK_7 = 0xA7,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PF_10,
- A2 = PF_9,
- A3 = PF_8,
- A4 = PF_7,
- A5 = PF_6,
- D0 = PC_7,
- D1 = PC_6,
- D2 = PG_6,
- D3 = PB_4,
- D4 = PG_7,
- D5 = PI_0,
- D6 = PH_6,
- D7 = PI_3,
- D8 = PI_2,
- D9 = PA_15,
- D10 = PA_8,
- D11 = PB_15,
- D12 = PB_14,
- D13 = PI_1,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PI_1, // LD1 = GREEN
- LED2 = PI_1,
- LED3 = PI_1,
- LED4 = PI_1,
- USER_BUTTON = PI_11,
- SERIAL_TX = PA_9, // Virtual Com Port
- SERIAL_RX = PB_7, // Virtual Com Port
- USBTX = PA_9, // Virtual Com Port
- USBRX = PB_7, // Virtual Com Port
- I2C_SCL = D15,
- I2C_SDA = D14,
- SPI_MOSI = D11,
- SPI_MISO = D12,
- SPI_SCK = D13,
- SPI_CS = D10,
- PWM_OUT = D9,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,54 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8,
- PortJ = 9,
- PortK = 10
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint8_t channel;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
- uint32_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint8_t channel;
- uint8_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/analogin_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,214 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-#include "mbed_error.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
-#if defined(ADC1)
- static int adc1_inited = 0;
-#endif
-#if defined(ADC2)
- static int adc2_inited = 0;
-#endif
-#if defined(ADC3)
- static int adc3_inited = 0;
-#endif
-
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Get the functions (adc channel) from the pin and assign it to the object
- uint32_t function = pinmap_function(pin, PinMap_ADC);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // Check if ADC is already initialized
- // Enable ADC clock
-#if defined(ADC1)
- if ((obj->adc == ADC_1) && adc1_inited) return;
- if (obj->adc == ADC_1) {
- __HAL_RCC_ADC1_CLK_ENABLE();
- adc1_inited = 1;
- }
-#endif
-#if defined(ADC2)
- if ((obj->adc == ADC_2) && adc2_inited) return;
- if (obj->adc == ADC_2) {
- __HAL_RCC_ADC2_CLK_ENABLE();
- adc2_inited = 1;
- }
-#endif
-#if defined(ADC3)
- if ((obj->adc == ADC_3) && adc3_inited) return;
- if (obj->adc == ADC_3) {
- __HAL_RCC_ADC3_CLK_ENABLE();
- adc3_inited = 1;
- }
-#endif
-
- // Configure ADC
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
- AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV4;
- AdcHandle.Init.Resolution = ADC_RESOLUTION_12B;
- AdcHandle.Init.ScanConvMode = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE;
- AdcHandle.Init.DiscontinuousConvMode = DISABLE;
- AdcHandle.Init.NbrOfDiscConversion = 0;
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.NbrOfConversion = 1;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.EOCSelection = DISABLE;
-
- if (HAL_ADC_Init(&AdcHandle) != HAL_OK) {
- error("Cannot initialize ADC");
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig = {0};
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- sConfig.Rank = 1;
- sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES;
- sConfig.Offset = 0;
-
- switch (obj->channel) {
- case 0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case 1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case 2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case 3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case 4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case 5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case 6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case 7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case 8:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case 9:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case 10:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case 11:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case 12:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case 13:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case 14:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case 15:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- case 16:
- sConfig.Channel = ADC_CHANNEL_16;
- break;
- case 17:
- sConfig.Channel = ADC_CHANNEL_17;
- break;
- case 18:
- sConfig.Channel = ADC_CHANNEL_18;
- break;
- default:
- return 0;
- }
-
- if (HAL_ADC_ConfigChannel(&AdcHandle, &sConfig) != HAL_OK) {
- error("Cannot configure ADC channel");
- }
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- HAL_ADC_PollForConversion(&AdcHandle, 10);
- if (HAL_ADC_GetState(&AdcHandle) == HAL_ADC_STATE_EOC_REG) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/analogout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,158 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "stm32f7xx_hal.h"
-#include "PeripheralPins.h"
-
-#define RANGE_12BIT (0xFFF)
-
-DAC_HandleTypeDef DacHandle;
-static DAC_ChannelConfTypeDef sConfig;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- uint32_t channel ;
- HAL_StatusTypeDef status;
-
- // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
- // Get the functions (dac channel) from the pin and assign it to the object
- uint32_t function = pinmap_function(pin, PinMap_DAC);
- MBED_ASSERT(function != (uint32_t)NC);
- // Save the channel for the write and read functions
- obj->channel = STM_PIN_CHANNEL(function);
-
- if (obj->dac == (DACName)NC) {
- error("DAC pin mapping failed");
- }
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- __GPIOA_CLK_ENABLE();
-
- __DAC_CLK_ENABLE();
-
- DacHandle.Instance = DAC;
-
- status = HAL_DAC_Init(&DacHandle);
- if (status != HAL_OK) {
- error("HAL_DAC_Init failed");
- }
-
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
-
- if (obj->channel == 1) {
- channel = DAC_CHANNEL_1;
- } else {
- channel = DAC_CHANNEL_2;
- }
-
- if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
- error("HAL_DAC_ConfigChannel failed");
- }
-
- if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
- error("HAL_DAC_Start failed");
- }
-
- if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
- error("HAL_DAC_SetValue failed");
- }
-
-}
-
-void analogout_free(dac_t *obj)
-{
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- if (obj->channel == 1) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- } else if (obj->channel == 2) {
- status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- }
-
- if (status != HAL_OK) {
- error("DAC pin mapping failed");
- }
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->channel == 1) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- } else if (obj->channel == 2) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
- return 0; /* Just silented warning */
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)RANGE_12BIT); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)RANGE_12BIT));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)RANGE_12BIT) {
- value = (uint16_t)RANGE_12BIT; // Max value
- }
-
- dac_write(obj, value);
-}
-
-float analogout_read(dac_t *obj)
-{
-
- uint32_t value = dac_read(obj);
- return (float)value * (1.0f / (float)RANGE_12BIT);
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/gpio_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,76 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set_clr = &gpio->BSRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/gpio_irq_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,332 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
-#define CHANNEL_NUM (7)
-
-// Max pins for one line (max with EXTI10_15)
-#define MAX_PIN_LINE (6)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0
- 0, // pin 0
- // EXTI1
- 0, // pin 1
- // EXTI2
- 0, // pin 2
- // EXTI3
- 0, // pin 3
- // EXTI4
- 0, // pin 4
- // EXTI5_9
- 0, // pin 5
- 1, // pin 6
- 2, // pin 7
- 3, // pin 8
- 4, // pin 9
- // EXTI10_15
- 0, // pin 10
- 1, // pin 11
- 2, // pin 12
- 3, // pin 13
- 4, // pin 14
- 5 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 1);
-}
-
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 1);
-}
-
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 1);
-}
-
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3, 1);
-}
-
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4, 1);
-}
-
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5, 5);
-}
-
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6, 6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported.\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/gpio_object.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set_clr = obj->mask;
- } else {
- *obj->reg_set_clr = obj->mask << 16;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj)
-{
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/i2c_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,438 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-#include "mbed_error.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x4000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-int i2c1_inited = 0;
-/* Ready for next F7 devices
-int i2c2_inited = 0;
-int i2c3_inited = 0;
-int i2c4_inited = 0;
-*/
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_PCLK1);
- __HAL_RCC_I2C1_CLK_ENABLE();
- // Configure I2C1 pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- /* Ready for next F7 devices
- #if defined(I2C2_BASE)
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __HAL_RCC_I2C2_CONFIG(RCC_I2C2CLKSOURCE_PCLK1);
- __HAL_RCC_I2C2_CLK_ENABLE();
- // Configure I2C2 pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- #endif
-
- #if defined(I2C3_BASE)
- if ((obj->i2c == I2C_3) && !i2c3_inited) {
- i2c3_inited = 1;
- __HAL_RCC_I2C3_CONFIG(RCC_I2C3CLKSOURCE_PCLK1);
- __HAL_RCC_I2C3_CLK_ENABLE();
- // Configure I2C3 pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- #endif
-
- #if defined(I2C4_BASE)
- if ((obj->i2c == I2C_4) && !i2c4_inited) {
- i2c4_inited = 1;
- __HAL_RCC_I2C4_CONFIG(RCC_I2C4CLKSOURCE_PCLK1);
- __HAL_RCC_I2C4_CLK_ENABLE();
- // Configure I2C4 pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
- #endif
- */
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- uint32_t tim = 0;
-
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0)) {}
-
- /*
- Values calculated with I2C_Timing_Configuration tool (excel file)
- * Standard mode (up to 100 kHz)
- * Fast Mode (up to 400 kHz)
- * Fast Mode Plus (up to 1 MHz)
- Below values obtained with:
- - I2Cx clock source = APB1CLK = 54 MHz
- - Analog filter delay = ON
- - Digital filter coefficient = 0
- */
- switch (hz) {
- case 100000:
- tim = 0x10916998; // Standard mode with Rise time = 120ns, Fall time = 120ns
- break;
- case 400000:
- tim = 0x00B11B54; // Fast Mode with Rise time = 120ns, Fall time = 120ns
- break;
- case 1000000:
- tim = 0x0090091B; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2cHandle.Init.Timing = tim;
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
-
- if (HAL_I2C_Init(&I2cHandle) != HAL_OK) {
- error("Cannot initialize I2C");
- }
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- /* update CR2 register */
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = LONG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- /* Wait until STOPF flag is set */
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- /* Clear STOP Flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- /* update CR2 register */
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- /* Wait until STOPF flag is set */
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- /* Clear STOP Flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- __I2C1_FORCE_RESET();
- __I2C1_RELEASE_RESET();
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
-
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- char size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- char size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/mbed_overrides.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,39 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-HAL_StatusTypeDef HAL_Init(void);
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
- // Need to restart HAL driver after the RAM is initialized
- HAL_Init();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/pinmap.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,181 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-static const uint32_t gpio_mode[13] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x10110000, // 6 = GPIO_MODE_IT_RISING
- 0x10210000, // 7 = GPIO_MODE_IT_FALLING
- 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 9 = GPIO_MODE_EVT_RISING
- 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 12 = Reset GPIO_MODE_IT_EVT
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __GPIOC_CLK_ENABLE();
- break;
-#if defined GPIOD_BASE
- case PortD:
- gpio_add = GPIOD_BASE;
- __GPIOD_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOE_BASE
- case PortE:
- gpio_add = GPIOE_BASE;
- __GPIOE_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOF_BASE
- case PortF:
- gpio_add = GPIOF_BASE;
- __GPIOF_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOG_BASE
- case PortG:
- gpio_add = GPIOG_BASE;
- __GPIOG_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOH_BASE
- case PortH:
- gpio_add = GPIOH_BASE;
- __GPIOH_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOI_BASE
- case PortI:
- gpio_add = GPIOI_BASE;
- __GPIOI_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOJ_BASE
- case PortJ:
- gpio_add = GPIOJ_BASE;
- __GPIOJ_CLK_ENABLE();
- break;
-#endif
-#if defined GPIOK_BASE
- case PortK:
- gpio_add = GPIOK_BASE;
- __GPIOK_CLK_ENABLE();
- break;
-#endif
- default:
- error("Pinmap error: wrong port number.");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2)
- pupd = 0; // Open-drain = No pull-up/No pull-down
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/port_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/pwmout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,233 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
- MBED_ASSERT(obj->pwm != (PWMName)NC);
-
- // Get the functions (timer channel, (non)inverted) from the pin and assign it to the object
- uint32_t function = pinmap_function(pin, PinMap_PWM);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
- obj->inverted = STM_PIN_INVERTED(function);
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __HAL_RCC_TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __HAL_RCC_TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __HAL_RCC_TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __HAL_RCC_TIM4_CLK_ENABLE();
- if (obj->pwm == PWM_8) __HAL_RCC_TIM8_CLK_ENABLE();
- if (obj->pwm == PWM_9) __HAL_RCC_TIM9_CLK_ENABLE();
- if (obj->pwm == PWM_10) __HAL_RCC_TIM10_CLK_ENABLE();
- if (obj->pwm == PWM_11) __HAL_RCC_TIM11_CLK_ENABLE();
- if (obj->pwm == PWM_12) __HAL_RCC_TIM12_CLK_ENABLE();
- if (obj->pwm == PWM_13) __HAL_RCC_TIM13_CLK_ENABLE();
- if (obj->pwm == PWM_14) __HAL_RCC_TIM14_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_DISABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->channel) {
- case 1:
- channel = TIM_CHANNEL_1;
- break;
- case 2:
- channel = TIM_CHANNEL_2;
- break;
- case 3:
- channel = TIM_CHANNEL_3;
- break;
- case 4:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- if (HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel) != HAL_OK) {
- error("Cannot configure PWM channel\n");
- }
-
- if (obj->inverted) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
- RCC_ClkInitTypeDef RCC_ClkInitStruct;
- uint32_t PclkFreq;
- uint32_t APBxCLKDivider;
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- // Get clock configuration
- // Note: PclkFreq contains here the Latency (not used after)
- HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
-
- // Get the PCLK and APBCLK divider related to the timer
- switch (obj->pwm) {
-
- // APB1 clock
- case PWM_2:
- case PWM_3:
- case PWM_4:
- case PWM_5:
- case PWM_12:
- case PWM_13:
- case PWM_14:
- PclkFreq = HAL_RCC_GetPCLK1Freq();
- APBxCLKDivider = RCC_ClkInitStruct.APB1CLKDivider;
- break;
-
- // APB2 clock
- case PWM_1:
- case PWM_8:
- case PWM_9:
- case PWM_10:
- case PWM_11:
- PclkFreq = HAL_RCC_GetPCLK2Freq();
- APBxCLKDivider = RCC_ClkInitStruct.APB2CLKDivider;
- break;
- default:
- return;
- }
-
- TimHandle.Init.Period = us - 1;
- // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
- if (APBxCLKDivider == RCC_HCLK_DIV1)
- TimHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 µs tick
- else
- TimHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 µs tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
-
- if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
- error("Cannot initialize PWM\n");
- }
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/rtc_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,203 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct;
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
- // Connect LSE to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
- rtc_freq = LSE_VALUE;
- } else {
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("RTC error: LSI clock initialization failed.");
- }
- // Connect LSI to RTC
- __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
- __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
- // [TODO] This value is LSI typical value. To be measured precisely using a timer input capture
- rtc_freq = LSI_VALUE;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("RTC error: RTC initialization failed.");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/serial_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,474 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-#include "mbed_error.h"
-
-#define UART_NUM (8)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0, 0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- if (HAL_UART_Init(&UartHandle) != HAL_OK) {
- error("Cannot initialize UART");
- }
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- // Enable USART clock
- switch (obj->uart) {
- case UART_1:
- __USART1_CLK_ENABLE();
- obj->index = 0;
- break;
- case UART_2:
- __USART2_CLK_ENABLE();
- obj->index = 1;
- break;
-#if defined(USART3_BASE)
- case UART_3:
- __USART3_CLK_ENABLE();
- obj->index = 2;
- break;
-#endif
-#if defined(UART4_BASE)
- case UART_4:
- __UART4_CLK_ENABLE();
- obj->index = 3;
- break;
-#endif
-#if defined(UART5_BASE)
- case UART_5:
- __UART5_CLK_ENABLE();
- obj->index = 4;
- break;
-#endif
- case UART_6:
- __USART6_CLK_ENABLE();
- obj->index = 5;
- break;
-#if defined(UART7_BASE)
- case UART_7:
- __UART7_CLK_ENABLE();
- obj->index = 6;
- break;
-#endif
-#if defined(UART8_BASE)
- case UART_8:
- __UART8_CLK_ENABLE();
- obj->index = 7;
- break;
-#endif
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->baudrate = 9600;
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
-
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- switch (obj->uart) {
- case UART_1:
- __USART1_FORCE_RESET();
- __USART1_RELEASE_RESET();
- __USART1_CLK_DISABLE();
- break;
- case UART_2:
- __USART2_FORCE_RESET();
- __USART2_RELEASE_RESET();
- __USART2_CLK_DISABLE();
- break;
-#if defined(USART3_BASE)
- case UART_3:
- __USART3_FORCE_RESET();
- __USART3_RELEASE_RESET();
- __USART3_CLK_DISABLE();
- break;
-#endif
-#if defined(UART4_BASE)
- case UART_4:
- __UART4_FORCE_RESET();
- __UART4_RELEASE_RESET();
- __UART4_CLK_DISABLE();
- break;
-#endif
-#if defined(UART5_BASE)
- case UART_5:
- __UART5_FORCE_RESET();
- __UART5_RELEASE_RESET();
- __UART5_CLK_DISABLE();
- break;
-#endif
- case UART_6:
- __USART6_FORCE_RESET();
- __USART6_RELEASE_RESET();
- __USART6_CLK_DISABLE();
- break;
-#if defined(UART7_BASE)
- case UART_7:
- __UART7_FORCE_RESET();
- __UART7_RELEASE_RESET();
- __UART7_CLK_DISABLE();
- break;
-#endif
-#if defined(UART8_BASE)
- case UART_8:
- __UART8_FORCE_RESET();
- __UART8_RELEASE_RESET();
- __UART8_CLK_DISABLE();
- break;
-#endif
- }
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-#if defined(USART3_BASE)
-static void uart3_irq(void)
-{
- uart_irq(UART_3, 2);
-}
-#endif
-
-#if defined(UART4_BASE)
-static void uart4_irq(void)
-{
- uart_irq(UART_4, 3);
-}
-#endif
-
-#if defined(UART5_BASE)
-static void uart5_irq(void)
-{
- uart_irq(UART_5, 4);
-}
-#endif
-
-static void uart6_irq(void)
-{
- uart_irq(UART_6, 5);
-}
-
-#if defined(UART7_BASE)
-static void uart7_irq(void)
-{
- uart_irq(UART_7, 6);
-}
-#endif
-
-#if defined(UART8_BASE)
-static void uart8_irq(void)
-{
- uart_irq(UART_8, 7);
-}
-#endif
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- switch (obj->uart) {
- case UART_1:
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- break;
-
- case UART_2:
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- break;
-#if defined(USART3_BASE)
- case UART_3:
- irq_n = USART3_IRQn;
- vector = (uint32_t)&uart3_irq;
- break;
-#endif
-#if defined(UART4_BASE)
- case UART_4:
- irq_n = UART4_IRQn;
- vector = (uint32_t)&uart4_irq;
- break;
-#endif
-#if defined(UART5_BASE)
- case UART_5:
- irq_n = UART5_IRQn;
- vector = (uint32_t)&uart5_irq;
- break;
-#endif
- case UART_6:
- irq_n = USART6_IRQn;
- vector = (uint32_t)&uart6_irq;
- break;
-#if defined(UART7_BASE)
- case UART_7:
- irq_n = UART7_IRQn;
- vector = (uint32_t)&uart7_irq;
- break;
-#endif
-#if defined(UART8_BASE)
- case UART_8:
- irq_n = UART8_IRQn;
- vector = (uint32_t)&uart8_irq;
- break;
-#endif
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->RDR & 0x1FF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->TDR = (uint32_t)(c & 0x1FF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/sleep.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- TimMasterHandle.Instance = TIM5;
-
- // Disable HAL tick interrupt
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP need to reconfigure the system clock
- SetSysClock();
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/spi_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,320 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "PeripheralPins.h"
-#include "mbed_error.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLED;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLED;
-
- if (HAL_SPI_Init(&SpiHandle) != HAL_OK) {
- error("Cannot initialize SPI");
- }
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_2) {
- __HAL_RCC_SPI2_CLK_ENABLE();
- }
-
- if (obj->spi == SPI_5) {
- __HAL_RCC_SPI5_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel != NC) {
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- } else {
- obj->nss = SPI_NSS_SOFT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_2) {
- __HAL_RCC_SPI2_FORCE_RESET();
- __HAL_RCC_SPI2_RELEASE_RESET();
- __HAL_RCC_SPI2_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_5) {
- __HAL_RCC_SPI5_FORCE_RESET();
- __HAL_RCC_SPI5_RELEASE_RESET();
- __HAL_RCC_SPI5_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (obj->nss != SPI_NSS_SOFT) {
- obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
- }
-
- obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // The frequencies are obtained with:
- // - SPI2 clock = 54 MHz (APB1 clock)
- // - SPI5 clock = 108 MHz (APB2 clock)
- if (obj->spi == SPI_2) {
- if (hz < 400000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 211 kHz
- } else if ((hz >= 400000) && (hz < 800000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 422 kHz
- } else if ((hz >= 800000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 844 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.69 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3.38 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6.75 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 13.5 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 27 MHz
- }
- } else if (obj->spi == SPI_5) {
- if (hz < 800000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 422 kHz
- } else if ((hz >= 800000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 844 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.69 MHz
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 3.38 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 6.75 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 13.5 MHz
- } else if ((hz >= 24000000) && (hz < 54000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 27 MHz
- } else { // >= 54000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 54 MHz
- }
- } else {
- return;
- }
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32F7/us_ticker.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,70 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-#include "hal_tick.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/PeripheralPins.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,66 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** DAC *** - -extern const PinMap PinMap_DAC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_DISCO_L476VG/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,90 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- LPUART_1 = (int)LPUART1_BASE
-} UARTName;
-
-#define STDIO_UART_TX PD_5
-#define STDIO_UART_RX PD_6
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_DISCO_L476VG/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,236 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 5, 0)}, // IN5
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 6, 0)}, // IN6
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 7, 0)}, // IN7
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 8, 0)}, // IN8
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 9, 0)}, // IN9
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 10, 0)}, // IN10
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 11, 0)}, // IN11
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 12, 0)}, // IN12
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 15, 0)}, // IN15
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 16, 0)}, // IN16
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 1, 0)}, // IN1
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 2, 0)}, // IN2
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 3, 0)}, // IN3
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 4, 0)}, // IN4
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 13, 0)}, // IN13
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 14, 0)}, // IN14
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // OUT2
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // Warning: connected also to GYRO_INT2 pin
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// Warning: TIM5 cannot be used because already used by the us_ticker.
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 (used by us_ticker)
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 (used by us_ticker)
-// {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)},// TIM15_CH1N
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 (used by us_ticker)
-// {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)},// TIM15_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 (used by us_ticker)
-// {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)},// TIM15_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)},// TIM16_CH1
- {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
-// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
-// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
-// {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)},// TIM17_CH1
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
-// {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)},// TIM16_CH1N
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
-// {PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)},// TIM17_CH1N
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - Warning: connected also to GYRO_INT2 pin
-// {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)},// TIM16_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - Warning: connected also to LCD_COM3 pin
-// {PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)},// TIM17_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
- {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
-// {PB_13, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)},// TIM15_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)},// TIM15_CH1
-// {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)},// TIM15_CH2
-// {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
-// {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
-// {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
-// {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
-// {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - Warning: connected also to LED1
- {PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
- {PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
- {PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PE_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Warning: UART_2 already used by STDIO
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Warning: Already used by UART_RX
- {PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
- {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // STDIO_TX
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Warning: UART_2 already used by STDIO
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
-// {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Warning: Already used by UART_TX
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // STDIO_RX
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PE_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PE_14, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Warning: does not work on this board due to other components connected on this pin
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PE_13, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PE_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_DISCO_L476VG/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,201 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7) |\
- ((CHANNEL & 0x0F) << 11) |\
- ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_ANALOG_ADC_CONTROL (6)
-#define STM_MODE_IT_RISING (7)
-#define STM_MODE_IT_FALLING (8)
-#define STM_MODE_IT_RISING_FALLING (9)
-#define STM_MODE_EVT_RISING (10)
-#define STM_MODE_EVT_FALLING (11)
-#define STM_MODE_EVT_RISING_FALLING (12)
-#define STM_MODE_IT_EVT_RESET (13)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00, // On P1/P2 connectors
- PA_1 = 0x01, // On P1/P2 connectors
- PA_2 = 0x02, // On P1/P2 connectors
- PA_3 = 0x03, // On P1/P2 connectors
- PA_4 = 0x04,
- PA_5 = 0x05, // On P1/P2 connectors
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12, // On P1/P2 connectors
- PB_3 = 0x13, // On P1/P2 connectors
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18, // On P1/P2 connectors
- PB_9 = 0x19, // On P1/P2 connectors
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E, // On P1/P2 connectors
- PC_15 = 0x2F, // On P1/P2 connectors
-
- PD_0 = 0x30, // On P1/P2 connectors
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48, // On P1/P2 connectors
- PE_9 = 0x49,
- PE_10 = 0x4A, // On P1/P2 connectors
- PE_11 = 0x4B, // On P1/P2 connectors
- PE_12 = 0x4C, // On P1/P2 connectors
- PE_13 = 0x4D, // On P1/P2 connectors
- PE_14 = 0x4E, // On P1/P2 connectors
- PE_15 = 0x4F, // On P1/P2 connectors
-
- PH_0 = 0x70, // On P1/P2 connectors
- PH_1 = 0x71, // On P1/P2 connectors
-
- // Generic signals namings
- LED1 = PE_8, // LD5 Green
- LED2 = PB_2, // LD4 Red
- LED3 = LED1,
- LED4 = LED2,
- JOYSTICK_CENTER = PA_0,
- JOYSTICK_LEFT = PA_1,
- JOYSTICK_RIGHT = PA_2,
- JOYSTICK_UP = PA_3,
- JOYSTICK_DOWN = PA_5,
- USER_BUTTON = JOYSTICK_CENTER,
- SERIAL_TX = PD_5,
- SERIAL_RX = PD_6,
- USBTX = PD_5,
- USBRX = PD_6,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_DISCO_L476VG/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_DISCO_L476VG/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_DISCO_L476VG/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint32_t channel;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
- uint32_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint32_t channel;
- uint32_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PeripheralNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,90 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- LPUART_1 = (int)LPUART1_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_15 = (int)TIM15_BASE,
- PWM_16 = (int)TIM16_BASE,
- PWM_17 = (int)TIM17_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PeripheralPins.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,224 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 5, 0)}, // IN5 - ARDUINO A0
- {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 6, 0)}, // IN6 - ARDUINO A1
- {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 7, 0)}, // IN7
- {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 8, 0)}, // IN8
- {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 9, 0)}, // IN9 - ARDUINO A2
- {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 10, 0)}, // IN10
- {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 11, 0)}, // IN11
- {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 12, 0)}, // IN12
- {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 15, 0)}, // IN15 - ARDUINO A3
- {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 16, 0)}, // IN16
- {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 1, 0)}, // IN1 - ARDUINO A5
- {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 2, 0)}, // IN2 - ARDUINO A4
- {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 3, 0)}, // IN3
- {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 4, 0)}, // IN4
- {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 13, 0)}, // IN13
- {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG_ADC_CONTROL, GPIO_NOPULL, 0, 14, 0)}, // IN14
- {NC, NC, 0}
-};
-
-//*** DAC ***
-
-const PinMap PinMap_DAC[] = {
- {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // OUT1
- {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // OUT2 (Warning: LED1 is also on this pin)
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PB_14, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PB_13, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
- {PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// Warning: TIM5 cannot be used because already used by the us_ticker.
-const PinMap PinMap_PWM[] = {
- {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 (used by us_ticker)
- {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
-// {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 (used by us_ticker)
-// {PA_1, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)},// TIM15_CH1N
- {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
-// {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 (used by us_ticker)
-// {PA_2, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)},// TIM15_CH1
- {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
-// {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 (used by us_ticker)
-// {PA_3, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)},// TIM15_CH2
- {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
-// {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
- {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
-// {PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)},// TIM16_CH1
- {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D11
-// {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
-// {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
-// {PA_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)},// TIM17_CH1
- {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
- {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
- {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
- {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
- {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
- {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
-// {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
-// {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ARDUINO D3
- {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D5
- {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - ARDUINO D10
-// {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)},// TIM16_CH1N
- {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
-// {PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)},// TIM17_CH1N
- {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-// {PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)},// TIM16_CH1
- {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-// {PB_9, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)},// TIM17_CH1
- {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ARDUINO D6
- {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
- {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
-// {PB_13, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)},// TIM15_CH1N
- {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
-// {PB_14, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 0)},// TIM15_CH1
-// {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
- {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
-// {PB_15, PWM_15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 2, 0)},// TIM15_CH2
-// {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
- {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
-// {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
- {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - ARDUINO D9
-// {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
- {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
-// {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
- {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
-// {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Already used by UART_RX
- {PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
- {PC_4, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
-// {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Already used by UART_TX
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
- {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
-// {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
- {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D11
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D12
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D13
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
- {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
-// {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
- {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
- {NC, NC, 0}
-};
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PinNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,195 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7)))
-
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\
- ((PUPD & 0x07) << 4) |\
- ((AFNUM & 0x0F) << 7) |\
- ((CHANNEL & 0x0F) << 11) |\
- ((INVERTED & 0x01) << 15)))
-
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_ANALOG_ADC_CONTROL (6)
-#define STM_MODE_IT_RISING (7)
-#define STM_MODE_IT_FALLING (8)
-#define STM_MODE_IT_RISING_FALLING (9)
-#define STM_MODE_EVT_RISING (10)
-#define STM_MODE_EVT_FALLING (11)
-#define STM_MODE_EVT_RISING_FALLING (12)
-#define STM_MODE_IT_EVT_RESET (13)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/PortNames.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/device.h Thu Apr 14 06:45:56 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/TARGET_NUCLEO_L476RG/objects.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
- uint32_t channel;
-};
-
-struct dac_s {
- DACName dac;
- PinName pin;
- uint32_t channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
- uint32_t channel;
- uint32_t inverted;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/analogin_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,194 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogin_api.h"
-
-#if DEVICE_ANALOGIN
-
-#include "wait_api.h"
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-ADC_HandleTypeDef AdcHandle;
-
-int adc_inited = 0;
-
-void analogin_init(analogin_t *obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
- MBED_ASSERT(obj->adc != (ADCName)NC);
-
- // Get the pin function and assign the used channel to the object
- uint32_t function = pinmap_function(pin, PinMap_ADC);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_ADC);
-
- // Save pin number for the read function
- obj->pin = pin;
-
- // The ADC initialization is done once
- if (adc_inited == 0) {
- adc_inited = 1;
-
- // Enable ADC clock
- __HAL_RCC_ADC_CLK_ENABLE();
- __HAL_RCC_ADC_CONFIG(RCC_ADCCLKSOURCE_SYSCLK);
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC
- AdcHandle.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV2; // Asynchronous clock mode, input ADC clock
- AdcHandle.Init.Resolution = ADC_RESOLUTION_12B;
- AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
- AdcHandle.Init.ScanConvMode = DISABLE; // Sequencer disabled (ADC conversion on only 1 channel: channel set on rank 1)
- AdcHandle.Init.EOCSelection = ADC_EOC_SINGLE_CONV; // On STM32L1xx ADC, overrun detection is enabled only if EOC selection is set to each conversion (or transfer by DMA enabled, this is not the case in this example).
- AdcHandle.Init.LowPowerAutoWait = DISABLE;
- AdcHandle.Init.ContinuousConvMode = DISABLE; // Continuous mode disabled to have only 1 conversion at each conversion trig
- AdcHandle.Init.NbrOfConversion = 1; // Parameter discarded because sequencer is disabled
- AdcHandle.Init.DiscontinuousConvMode = DISABLE; // Parameter discarded because sequencer is disabled
- AdcHandle.Init.NbrOfDiscConversion = 1; // Parameter discarded because sequencer is disabled
- AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START; // Software start to trig the 1st conversion manually, without external event
- AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
- AdcHandle.Init.DMAContinuousRequests = DISABLE;
- AdcHandle.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; // DR register is overwritten with the last conversion result in case of overrun
- AdcHandle.Init.OversamplingMode = DISABLE; // No oversampling
-
- if (HAL_ADC_Init(&AdcHandle) != HAL_OK) {
- error("Cannot initialize ADC\n");
- }
- }
-}
-
-static inline uint16_t adc_read(analogin_t *obj)
-{
- ADC_ChannelConfTypeDef sConfig = {0};
-
- AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
-
- // Configure ADC channel
- switch (obj->channel) {
- case 0:
- sConfig.Channel = ADC_CHANNEL_0;
- break;
- case 1:
- sConfig.Channel = ADC_CHANNEL_1;
- break;
- case 2:
- sConfig.Channel = ADC_CHANNEL_2;
- break;
- case 3:
- sConfig.Channel = ADC_CHANNEL_3;
- break;
- case 4:
- sConfig.Channel = ADC_CHANNEL_4;
- break;
- case 5:
- sConfig.Channel = ADC_CHANNEL_5;
- break;
- case 6:
- sConfig.Channel = ADC_CHANNEL_6;
- break;
- case 7:
- sConfig.Channel = ADC_CHANNEL_7;
- break;
- case 8:
- sConfig.Channel = ADC_CHANNEL_8;
- break;
- case 9:
- sConfig.Channel = ADC_CHANNEL_9;
- break;
- case 10:
- sConfig.Channel = ADC_CHANNEL_10;
- break;
- case 11:
- sConfig.Channel = ADC_CHANNEL_11;
- break;
- case 12:
- sConfig.Channel = ADC_CHANNEL_12;
- break;
- case 13:
- sConfig.Channel = ADC_CHANNEL_13;
- break;
- case 14:
- sConfig.Channel = ADC_CHANNEL_14;
- break;
- case 15:
- sConfig.Channel = ADC_CHANNEL_15;
- break;
- case 16:
- sConfig.Channel = ADC_CHANNEL_16;
- break;
- case 17:
- sConfig.Channel = ADC_CHANNEL_17;
- break;
- case 18:
- sConfig.Channel = ADC_CHANNEL_18;
- break;
- default:
- return 0;
- }
-
- sConfig.Rank = ADC_REGULAR_RANK_1;
- sConfig.SamplingTime = ADC_SAMPLETIME_47CYCLES_5;
- sConfig.SingleDiff = ADC_SINGLE_ENDED;
- sConfig.OffsetNumber = ADC_OFFSET_NONE;
- sConfig.Offset = 0;
-
- HAL_ADC_ConfigChannel(&AdcHandle, &sConfig);
-
- HAL_ADC_Start(&AdcHandle); // Start conversion
-
- // Wait end of conversion and get value
- if (HAL_ADC_PollForConversion(&AdcHandle, 10) == HAL_OK) {
- return (HAL_ADC_GetValue(&AdcHandle));
- } else {
- return 0;
- }
-}
-
-uint16_t analogin_read_u16(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- // 12-bit to 16-bit conversion
- value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
- return value;
-}
-
-float analogin_read(analogin_t *obj)
-{
- uint16_t value = adc_read(obj);
- return (float)value * (1.0f / (float)0xFFF); // 12 bits range
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/analogout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,167 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "mbed_assert.h"
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-#define DAC_RANGE (0xFFF) // 12 bits
-
-static DAC_HandleTypeDef DacHandle;
-
-// These variables are used for the "free" function
-static int channel1_used = 0;
-static int channel2_used = 0;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
- DAC_ChannelConfTypeDef sConfig = {0};
-
- // Get the peripheral name from the pin and assign it to the object
- obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
- MBED_ASSERT(obj->dac != (DACName)NC);
-
- // Get the pin function and assign the used channel to the object
- uint32_t function = pinmap_function(pin, PinMap_DAC);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_DAC);
-
- // Save the pin for future use
- obj->pin = pin;
-
- // Enable DAC clock
- __HAL_RCC_DAC1_CLK_ENABLE();
-
- // Configure DAC
- DacHandle.Instance = DAC;
-
- if (HAL_DAC_Init(&DacHandle) != HAL_OK) {
- error("Cannot initialize DAC\n");
- }
-
- sConfig.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_DISABLE;
- sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
- sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_DISABLE;
- sConfig.DAC_UserTrimming = DAC_TRIMMING_FACTORY;
-
- if (obj->channel == 2) {
- if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2) != HAL_OK) {
- error("Cannot configure DAC channel 2\n");
- }
- channel2_used = 1;
- } else { // channel 1 per default
- if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1) != HAL_OK) {
- error("Cannot configure DAC channel 1\n");
- }
- obj->channel = 1;
- channel1_used = 1;
- }
-
- analogout_write_u16(obj, 0);
-}
-
-void analogout_free(dac_t *obj)
-{
- // Reset DAC and disable clock
- if (obj->channel == 1) channel1_used = 0;
- if (obj->channel == 2) channel2_used = 0;
-
- if ((channel1_used == 0) && (channel2_used == 0)) {
- __HAL_RCC_DAC1_FORCE_RESET();
- __HAL_RCC_DAC1_RELEASE_RESET();
- __HAL_RCC_DAC1_CLK_DISABLE();
- }
-
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-static inline void dac_write(dac_t *obj, uint16_t value)
-{
- if (obj->channel == 1) {
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_1);
- }
- if (obj->channel == 2) {
- HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, value);
- HAL_DAC_Start(&DacHandle, DAC_CHANNEL_2);
- }
-}
-
-static inline int dac_read(dac_t *obj)
-{
- if (obj->channel == 1) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
- }
- if (obj->channel == 2) {
- return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
- }
- return 0;
-}
-
-void analogout_write(dac_t *obj, float value)
-{
- if (value < 0.0f) {
- dac_write(obj, 0); // Min value
- } else if (value > 1.0f) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, (uint16_t)(value * (float)DAC_RANGE));
- }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
- if (value > (uint16_t)DAC_RANGE) {
- dac_write(obj, (uint16_t)DAC_RANGE); // Max value
- } else {
- dac_write(obj, value);
- }
-}
-
-float analogout_read(dac_t *obj)
-{
- uint32_t value = dac_read(obj);
- return (float)((float)value * (1.0f / (float)DAC_RANGE));
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
- return (uint16_t)dac_read(obj);
-}
-
-#endif // DEVICE_ANALOGOUT
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/gpio_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "gpio_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-uint32_t gpio_set(PinName pin)
-{
- MBED_ASSERT(pin != (PinName)NC);
-
- pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
-}
-
-void gpio_init(gpio_t *obj, PinName pin)
-{
- obj->pin = pin;
- if (pin == (PinName)NC)
- return;
-
- uint32_t port_index = STM_PORT(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill GPIO object structure for future use
- obj->mask = gpio_set(pin);
- obj->reg_in = &gpio->IDR;
- obj->reg_set = &gpio->BSRR;
- obj->reg_clr = &gpio->BRR;
-}
-
-void gpio_mode(gpio_t *obj, PinMode mode)
-{
- pin_mode(obj->pin, mode);
-}
-
-void gpio_dir(gpio_t *obj, PinDirection direction)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (direction == PIN_OUTPUT) {
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/gpio_irq_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,332 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include <stddef.h>
-#include "cmsis.h"
-#include "gpio_irq_api.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-
-#define EDGE_NONE (0)
-#define EDGE_RISE (1)
-#define EDGE_FALL (2)
-#define EDGE_BOTH (3)
-
-// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
-#define CHANNEL_NUM (7)
-
-// Max pins for one line (max with EXTI10_15)
-#define MAX_PIN_LINE (6)
-
-typedef struct gpio_channel {
- uint32_t pin_mask; // bitmask representing which pins are configured for receiving interrupts
- uint32_t channel_ids[MAX_PIN_LINE]; // mbed "gpio_irq_t gpio_irq" field of instance
- uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
- uint32_t channel_pin[MAX_PIN_LINE]; // pin number in port group
-} gpio_channel_t;
-
-static gpio_channel_t channels[CHANNEL_NUM] = {
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0},
- {.pin_mask = 0}
-};
-
-// Used to return the index for channels array.
-static uint32_t pin_base_nr[16] = {
- // EXTI0
- 0, // pin 0
- // EXTI1
- 0, // pin 1
- // EXTI2
- 0, // pin 2
- // EXTI3
- 0, // pin 3
- // EXTI4
- 0, // pin 4
- // EXTI5_9
- 0, // pin 5
- 1, // pin 6
- 2, // pin 7
- 3, // pin 8
- 4, // pin 9
- // EXTI10_15
- 0, // pin 10
- 1, // pin 11
- 2, // pin 12
- 3, // pin 13
- 4, // pin 14
- 5 // pin 15
-};
-
-static gpio_irq_handler irq_handler;
-
-static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
-{
- gpio_channel_t *gpio_channel = &channels[irq_index];
- uint32_t gpio_idx;
-
- for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
- uint32_t current_mask = (1 << gpio_idx);
-
- if (gpio_channel->pin_mask & current_mask) {
- // Retrieve the gpio and pin that generate the irq
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
- uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
-
- // Clear interrupt flag
- if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
- __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
-
- if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
-
- // Check which edge has generated the irq
- if ((gpio->IDR & pin) == 0) {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
- } else {
- irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
- }
- }
- }
- }
-}
-
-// EXTI line 0
-static void gpio_irq0(void)
-{
- handle_interrupt_in(0, 1);
-}
-
-// EXTI line 1
-static void gpio_irq1(void)
-{
- handle_interrupt_in(1, 1);
-}
-
-// EXTI line 2
-static void gpio_irq2(void)
-{
- handle_interrupt_in(2, 1);
-}
-
-// EXTI line 3
-static void gpio_irq3(void)
-{
- handle_interrupt_in(3, 1);
-}
-
-// EXTI line 4
-static void gpio_irq4(void)
-{
- handle_interrupt_in(4, 1);
-}
-
-// EXTI lines 5 to 9
-static void gpio_irq5(void)
-{
- handle_interrupt_in(5, 5);
-}
-
-// EXTI lines 10 to 15
-static void gpio_irq6(void)
-{
- handle_interrupt_in(6, 6);
-}
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
- uint32_t irq_index;
- gpio_channel_t *gpio_channel;
- uint32_t gpio_idx;
-
- if (pin == NC) return -1;
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Select irq number and interrupt routine
- switch (pin_index) {
- case 0:
- irq_n = EXTI0_IRQn;
- vector = (uint32_t)&gpio_irq0;
- irq_index = 0;
- break;
- case 1:
- irq_n = EXTI1_IRQn;
- vector = (uint32_t)&gpio_irq1;
- irq_index = 1;
- break;
- case 2:
- irq_n = EXTI2_IRQn;
- vector = (uint32_t)&gpio_irq2;
- irq_index = 2;
- break;
- case 3:
- irq_n = EXTI3_IRQn;
- vector = (uint32_t)&gpio_irq3;
- irq_index = 3;
- break;
- case 4:
- irq_n = EXTI4_IRQn;
- vector = (uint32_t)&gpio_irq4;
- irq_index = 4;
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- irq_n = EXTI9_5_IRQn;
- vector = (uint32_t)&gpio_irq5;
- irq_index = 5;
- break;
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- irq_n = EXTI15_10_IRQn;
- vector = (uint32_t)&gpio_irq6;
- irq_index = 6;
- break;
- default:
- error("InterruptIn error: pin not supported\n");
- return -1;
- }
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
-
- // Configure GPIO
- pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
-
- // Enable EXTI interrupt
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- // Save informations for future use
- obj->irq_n = irq_n;
- obj->irq_index = irq_index;
- obj->event = EDGE_NONE;
- obj->pin = pin;
-
- gpio_channel = &channels[irq_index];
- gpio_idx = pin_base_nr[pin_index];
- gpio_channel->pin_mask |= (1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = id;
- gpio_channel->channel_gpio[gpio_idx] = gpio_add;
- gpio_channel->channel_pin[gpio_idx] = pin_index;
-
- irq_handler = handler;
-
- return 0;
-}
-
-void gpio_irq_free(gpio_irq_t *obj)
-{
- gpio_channel_t *gpio_channel = &channels[obj->irq_index];
- uint32_t pin_index = STM_PIN(obj->pin);
- uint32_t gpio_idx = pin_base_nr[pin_index];
-
- gpio_channel->pin_mask &= ~(1 << gpio_idx);
- gpio_channel->channel_ids[gpio_idx] = 0;
- gpio_channel->channel_gpio[gpio_idx] = 0;
- gpio_channel->channel_pin[gpio_idx] = 0;
-
- // Disable EXTI line
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- obj->event = EDGE_NONE;
-}
-
-void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
-{
- uint32_t mode = STM_MODE_IT_EVT_RESET;
- uint32_t pull = GPIO_NOPULL;
-
- if (enable) {
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or RISE
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING_FALLING;
- obj->event = EDGE_BOTH;
- } else { // NONE or FALL
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- }
- }
- } else { // Disable
- if (event == IRQ_RISE) {
- if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_FALLING;
- obj->event = EDGE_FALL;
- } else { // NONE or RISE
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- if (event == IRQ_FALL) {
- if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
- mode = STM_MODE_IT_RISING;
- obj->event = EDGE_RISE;
- } else { // NONE or FALL
- mode = STM_MODE_IT_EVT_RESET;
- obj->event = EDGE_NONE;
- }
- }
- }
-
- pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
-}
-
-void gpio_irq_enable(gpio_irq_t *obj)
-{
- NVIC_EnableIRQ(obj->irq_n);
-}
-
-void gpio_irq_disable(gpio_irq_t *obj)
-{
- NVIC_DisableIRQ(obj->irq_n);
- obj->event = EDGE_NONE;
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/gpio_object.h Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,76 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-static inline int gpio_is_connected(const gpio_t *obj)
-{
- return obj->pin != (PinName)NC;
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/i2c_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,413 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "i2c_api.h"
-
-#if DEVICE_I2C
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-/* Timeout values for flags and events waiting loops. These timeouts are
- not based on accurate values, they just guarantee that the application will
- not remain stuck if the I2C communication is corrupted. */
-#define FLAG_TIMEOUT ((int)0x1000)
-#define LONG_TIMEOUT ((int)0x8000)
-
-I2C_HandleTypeDef I2cHandle;
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl)
-{
- static int i2c1_inited = 0;
- static int i2c2_inited = 0;
-#if defined(I2C3_BASE)
- static int i2c3_inited = 0;
-#endif
-
- // Determine the I2C to use
- I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
- I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-
- obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
- MBED_ASSERT(obj->i2c != (I2CName)NC);
-
- // Enable I2C1 clock and pinout if not done
- if ((obj->i2c == I2C_1) && !i2c1_inited) {
- i2c1_inited = 1;
- __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
- __HAL_RCC_I2C1_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
- // Enable I2C2 clock and pinout if not done
- if ((obj->i2c == I2C_2) && !i2c2_inited) {
- i2c2_inited = 1;
- __HAL_RCC_I2C2_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-
-#if defined(I2C3_BASE)
- // Enable I2C3 clock and pinout if not done
- if ((obj->i2c == I2C_3) && !i2c3_inited) {
- i2c3_inited = 1;
- __HAL_RCC_I2C3_CLK_ENABLE();
- // Configure I2C pins
- pinmap_pinout(sda, PinMap_I2C_SDA);
- pinmap_pinout(scl, PinMap_I2C_SCL);
- pin_mode(sda, OpenDrain);
- pin_mode(scl, OpenDrain);
- }
-#endif
-
- // Reset to clear pending flags if any
- i2c_reset(obj);
-
- // I2C configuration
- i2c_frequency(obj, 100000); // 100 kHz per default
-}
-
-void i2c_frequency(i2c_t *obj, int hz)
-{
- MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // wait before init
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- // Common settings: I2C clock = 32 MHz, Analog filter = ON, Digital filter coefficient = 0
- switch (hz) {
- case 100000:
- I2cHandle.Init.Timing = 0x20602938; // Standard mode with Rise Time = 400ns and Fall Time = 100ns
- break;
- case 400000:
- I2cHandle.Init.Timing = 0x00B0122A; // Fast mode with Rise Time = 250ns and Fall Time = 100ns
- break;
- case 1000000:
- I2cHandle.Init.Timing = 0x0030040E; // Fast mode Plus with Rise Time = 60ns and Fall Time = 100ns
- break;
- default:
- break;
- }
-
- // I2C configuration
- I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
- I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
- I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
- I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
- I2cHandle.Init.OwnAddress1 = 0;
- I2cHandle.Init.OwnAddress2 = 0;
- I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
-
- if (HAL_I2C_Init(&I2cHandle) != HAL_OK) {
- error("Cannot initialize I2C\n");
- }
-}
-
-inline int i2c_start(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- // Clear Acknowledge failure flag
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
-
- // Generate the START condition
- i2c->CR2 |= I2C_CR2_START;
-
- // Wait the START condition has been correctly sent
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
- if ((timeout--) == 0) {
- return 1;
- }
- }
-
- return 0;
-}
-
-inline int i2c_stop(i2c_t *obj)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
-
- // Generate the STOP condition
- i2c->CR2 |= I2C_CR2_STOP;
-
- return 0;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
- int value;
-
- /* update CR2 register */
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
-
- // Read all bytes
- for (count = 0; count < length; count++) {
- value = i2c_byte_read(obj, 0);
- data[count] = (char)value;
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- /* Wait until STOPF flag is set */
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- /* Clear STOP Flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return length;
-}
-
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int timeout;
- int count;
-
- /* update CR2 register */
- i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
- | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
-
- for (count = 0; count < length; count++) {
- i2c_byte_write(obj, data[count]);
- }
-
- // Wait transfer complete
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
-
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
-
- // If not repeated start, send stop.
- if (stop) {
- i2c_stop(obj);
- /* Wait until STOPF flag is set */
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
- timeout--;
- if (timeout == 0) {
- return -1;
- }
- }
- /* Clear STOP Flag */
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
- }
-
- return count;
-}
-
-int i2c_byte_read(i2c_t *obj, int last)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the byte is received
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
- if ((timeout--) == 0) {
- return -1;
- }
- }
-
- return (int)i2c->RXDR;
-}
-
-int i2c_byte_write(i2c_t *obj, int data)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- int timeout;
-
- // Wait until the previous byte is transmitted
- timeout = FLAG_TIMEOUT;
- while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
- if ((timeout--) == 0) {
- return 0;
- }
- }
-
- i2c->TXDR = (uint8_t)data;
-
- return 1;
-}
-
-void i2c_reset(i2c_t *obj)
-{
- int timeout;
-
- // wait before reset
- timeout = LONG_TIMEOUT;
- while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
-
- if (obj->i2c == I2C_1) {
- __HAL_RCC_I2C1_FORCE_RESET();
- __HAL_RCC_I2C1_RELEASE_RESET();
- }
- if (obj->i2c == I2C_2) {
- __HAL_RCC_I2C2_FORCE_RESET();
- __HAL_RCC_I2C2_RELEASE_RESET();
- }
-}
-
-#if DEVICE_I2CSLAVE
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
-{
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // disable
- i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
- // Get the old register value
- tmpreg = i2c->OAR1;
- // Reset address bits
- tmpreg &= 0xFC00;
- // Set new address
- tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
- // Store the new register value
- i2c->OAR1 = tmpreg;
- // enable
- i2c->OAR1 |= I2C_OAR1_OA1EN;
-}
-
-void i2c_slave_mode(i2c_t *obj, int enable_slave)
-{
-
- I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
- uint16_t tmpreg;
-
- // Get the old register value
- tmpreg = i2c->OAR1;
-
- // Enable / disable slave
- if (enable_slave == 1) {
- tmpreg |= I2C_OAR1_OA1EN;
- } else {
- tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
- }
-
- // Set new mode
- i2c->OAR1 = tmpreg;
-
-}
-
-// See I2CSlave.h
-#define NoData 0 // the slave has not been addressed
-#define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter)
-#define WriteGeneral 2 // the master is writing to all slave
-#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
-
-int i2c_slave_receive(i2c_t *obj)
-{
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
- int retValue = NoData;
-
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
- if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
- retValue = ReadAddressed;
- else
- retValue = WriteAddressed;
- __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
- }
- }
-
- return (retValue);
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length)
-{
- char size = 0;
-
- while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
-
- return size;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length)
-{
- char size = 0;
- I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
-
- do {
- i2c_byte_write(obj, data[size]);
- size++;
- } while (size < length);
-
- return size;
-}
-
-
-#endif // DEVICE_I2CSLAVE
-
-#endif // DEVICE_I2C
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/mbed_overrides.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,35 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "cmsis.h"
-
-// This function is called after RAM initialization and before main.
-void mbed_sdk_init()
-{
- // Update the SystemCoreClock variable.
- SystemCoreClockUpdate();
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/pinmap.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,147 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "pinmap.h"
-#include "PortNames.h"
-#include "mbed_error.h"
-
-// GPIO mode look-up table
-// Warning: order must be the same as the one defined in PinNames.h !!!
-static const uint32_t gpio_mode[14] = {
- 0x00000000, // 0 = GPIO_MODE_INPUT
- 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
- 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
- 0x00000002, // 3 = GPIO_MODE_AF_PP
- 0x00000012, // 4 = GPIO_MODE_AF_OD
- 0x00000003, // 5 = GPIO_MODE_ANALOG
- 0x0000000B, // 6 = GPIO_MODE_ANALOG_ADC_CONTROL
- 0x10110000, // 7 = GPIO_MODE_IT_RISING
- 0x10210000, // 8 = GPIO_MODE_IT_FALLING
- 0x10310000, // 9 = GPIO_MODE_IT_RISING_FALLING
- 0x10120000, // 10 = GPIO_MODE_EVT_RISING
- 0x10220000, // 11 = GPIO_MODE_EVT_FALLING
- 0x10320000, // 12 = GPIO_MODE_EVT_RISING_FALLING
- 0x10000000 // 13 = Reset IT and EVT (not in STM32Cube HAL)
-};
-
-// Enable GPIO clock and return GPIO base address
-uint32_t Set_GPIO_Clock(uint32_t port_idx)
-{
- uint32_t gpio_add = 0;
- switch (port_idx) {
- case PortA:
- gpio_add = GPIOA_BASE;
- __HAL_RCC_GPIOA_CLK_ENABLE();
- break;
- case PortB:
- gpio_add = GPIOB_BASE;
- __HAL_RCC_GPIOB_CLK_ENABLE();
- break;
- case PortC:
- gpio_add = GPIOC_BASE;
- __HAL_RCC_GPIOC_CLK_ENABLE();
- break;
- case PortD:
- gpio_add = GPIOD_BASE;
- __HAL_RCC_GPIOD_CLK_ENABLE();
- break;
- case PortE:
- gpio_add = GPIOE_BASE;
- __HAL_RCC_GPIOE_CLK_ENABLE();
- break;
- case PortH:
- gpio_add = GPIOH_BASE;
- __HAL_RCC_GPIOH_CLK_ENABLE();
- break;
- default:
- error("Pinmap error: wrong port number\n");
- break;
- }
- return gpio_add;
-}
-
-/**
- * Configure pin (mode, speed, output type and pull-up/pull-down)
- */
-void pin_function(PinName pin, int data)
-{
- MBED_ASSERT(pin != (PinName)NC);
- // Get the pin informations
- uint32_t mode = STM_PIN_MODE(data);
- uint32_t pupd = STM_PIN_PUPD(data);
- uint32_t afnum = STM_PIN_AFNUM(data);
-
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure GPIO
- GPIO_InitTypeDef GPIO_InitStructure;
- GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
- GPIO_InitStructure.Mode = gpio_mode[mode];
- GPIO_InitStructure.Pull = pupd;
- GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStructure.Alternate = afnum;
- HAL_GPIO_Init(gpio, &GPIO_InitStructure);
-
- // [TODO] Disconnect JTAG-DP + SW-DP signals.
- // Warning: Need to reconnect under reset
- //if ((pin == PA_13) || (pin == PA_14)) {
- //
- //}
- //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
- //
- //}
-}
-
-/**
- * Configure pin pull-up/pull-down
- */
-void pin_mode(PinName pin, PinMode mode)
-{
- MBED_ASSERT(pin != (PinName)NC);
- uint32_t port_index = STM_PORT(pin);
- uint32_t pin_index = STM_PIN(pin);
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Configure pull-up/pull-down resistors
- uint32_t pupd = (uint32_t)mode;
- if (pupd > 2) {
- pupd = 0; // Open-drain = No pull-up/No pull-down
- }
- gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
- gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
-}
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/port_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,103 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "port_api.h"
-#include "pinmap.h"
-#include "gpio_api.h"
-#include "mbed_error.h"
-
-#if DEVICE_PORTIN || DEVICE_PORTOUT
-
-extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
-
-// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
-// low nibble = pin number
-PinName port_pin(PortName port, int pin_n)
-{
- return (PinName)(pin_n + (port << 4));
-}
-
-void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
-{
- uint32_t port_index = (uint32_t)port;
-
- // Enable GPIO clock
- uint32_t gpio_add = Set_GPIO_Clock(port_index);
- GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
-
- // Fill PORT object structure for future use
- obj->port = port;
- obj->mask = mask;
- obj->direction = dir;
- obj->reg_in = &gpio->IDR;
- obj->reg_out = &gpio->ODR;
-
- port_dir(obj, dir);
-}
-
-void port_dir(port_t *obj, PinDirection dir)
-{
- uint32_t i;
- obj->direction = dir;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- if (dir == PIN_OUTPUT) {
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
- } else { // PIN_INPUT
- pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- }
- }
- }
-}
-
-void port_mode(port_t *obj, PinMode mode)
-{
- uint32_t i;
- for (i = 0; i < 16; i++) { // Process all pins
- if (obj->mask & (1 << i)) { // If the pin is used
- pin_mode(port_pin(obj->port, i), mode);
- }
- }
-}
-
-void port_write(port_t *obj, int value)
-{
- *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
-}
-
-int port_read(port_t *obj)
-{
- if (obj->direction == PIN_OUTPUT) {
- return (*obj->reg_out & obj->mask);
- } else { // PIN_INPUT
- return (*obj->reg_in & obj->mask);
- }
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/pwmout_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,196 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "pwmout_api.h"
-
-#if DEVICE_PWMOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static TIM_HandleTypeDef TimHandle;
-
-void pwmout_init(pwmout_t* obj, PinName pin)
-{
- // Get the peripheral name from the pin and assign it to the object
- obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
- MBED_ASSERT(obj->pwm != (PWMName)NC);
-
- // Get the pin function and assign the used channel to the object
- uint32_t function = pinmap_function(pin, PinMap_PWM);
- MBED_ASSERT(function != (uint32_t)NC);
- obj->channel = STM_PIN_CHANNEL(function);
- obj->inverted = STM_PIN_INVERTED(function);
-
- // Enable TIM clock
- if (obj->pwm == PWM_1) __HAL_RCC_TIM1_CLK_ENABLE();
- if (obj->pwm == PWM_2) __HAL_RCC_TIM2_CLK_ENABLE();
- if (obj->pwm == PWM_3) __HAL_RCC_TIM3_CLK_ENABLE();
- if (obj->pwm == PWM_4) __HAL_RCC_TIM4_CLK_ENABLE();
- if (obj->pwm == PWM_5) __HAL_RCC_TIM5_CLK_ENABLE();
- if (obj->pwm == PWM_8) __HAL_RCC_TIM8_CLK_ENABLE();
- if (obj->pwm == PWM_15) __HAL_RCC_TIM15_CLK_ENABLE();
- if (obj->pwm == PWM_16) __HAL_RCC_TIM16_CLK_ENABLE();
- if (obj->pwm == PWM_17) __HAL_RCC_TIM17_CLK_ENABLE();
-
- // Configure GPIO
- pinmap_pinout(pin, PinMap_PWM);
-
- obj->pin = pin;
- obj->period = 0;
- obj->pulse = 0;
-
- pwmout_period_us(obj, 20000); // 20 ms per default
-}
-
-void pwmout_free(pwmout_t* obj)
-{
- // Configure GPIO
- pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void pwmout_write(pwmout_t* obj, float value)
-{
- TIM_OC_InitTypeDef sConfig;
- int channel = 0;
-
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- if (value < (float)0.0) {
- value = 0.0;
- } else if (value > (float)1.0) {
- value = 1.0;
- }
-
- obj->pulse = (uint32_t)((float)obj->period * value);
-
- // Configure channels
- sConfig.OCMode = TIM_OCMODE_PWM1;
- sConfig.Pulse = obj->pulse;
- sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
- sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- sConfig.OCFastMode = TIM_OCFAST_ENABLE;
- sConfig.OCIdleState = TIM_OCIDLESTATE_RESET;
- sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-
- switch (obj->channel) {
- case 1:
- channel = TIM_CHANNEL_1;
- break;
- case 2:
- channel = TIM_CHANNEL_2;
- break;
- case 3:
- channel = TIM_CHANNEL_3;
- break;
- case 4:
- channel = TIM_CHANNEL_4;
- break;
- default:
- return;
- }
-
- if (HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel) != HAL_OK) {
- error("Cannot initialize PWM\n");
- }
-
- if (obj->inverted) {
- HAL_TIMEx_PWMN_Start(&TimHandle, channel);
- } else {
- HAL_TIM_PWM_Start(&TimHandle, channel);
- }
-}
-
-float pwmout_read(pwmout_t* obj)
-{
- float value = 0;
- if (obj->period > 0) {
- value = (float)(obj->pulse) / (float)(obj->period);
- }
- return ((value > (float)1.0) ? (float)(1.0) : (value));
-}
-
-void pwmout_period(pwmout_t* obj, float seconds)
-{
- pwmout_period_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_period_ms(pwmout_t* obj, int ms)
-{
- pwmout_period_us(obj, ms * 1000);
-}
-
-void pwmout_period_us(pwmout_t* obj, int us)
-{
- TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
-
- float dc = pwmout_read(obj);
-
- __HAL_TIM_DISABLE(&TimHandle);
-
- SystemCoreClockUpdate();
-
- TimHandle.Init.Period = us - 1;
- TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- TimHandle.Init.RepetitionCounter = 0;
-
- if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
- error("Cannot initialize PWM\n");
- }
-
- // Set duty cycle again
- pwmout_write(obj, dc);
-
- // Save for future use
- obj->period = us;
-
- __HAL_TIM_ENABLE(&TimHandle);
-}
-
-void pwmout_pulsewidth(pwmout_t* obj, float seconds)
-{
- pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
-}
-
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
-{
- pwmout_pulsewidth_us(obj, ms * 1000);
-}
-
-void pwmout_pulsewidth_us(pwmout_t* obj, int us)
-{
- float value = (float)us / (float)obj->period;
- pwmout_write(obj, value);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/rtc_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,209 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "rtc_api.h"
-
-#if DEVICE_RTC
-
-#include "mbed_error.h"
-
-static int rtc_inited = 0;
-
-static RTC_HandleTypeDef RtcHandle;
-
-void rtc_init(void)
-{
- RCC_OscInitTypeDef RCC_OscInitStruct = {0};
- RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
- uint32_t rtc_freq = 0;
-
- if (rtc_inited) return;
- rtc_inited = 1;
-
- RtcHandle.Instance = RTC;
-
- // Enable Power clock
- __HAL_RCC_PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Enable LSE Oscillator
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { // Check if LSE has started correctly
- // Connect LSE to RTC
- PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
- PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
- HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
- rtc_freq = LSE_VALUE;
- } else { // LSE didn't start, try with LSI
- // Enable LSI clock
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- RCC_OscInitStruct.LSIState = RCC_LSI_ON;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- error("Cannot initialize RTC with LSI\n");
- }
- // Connect LSI to RTC
- PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
- PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
- if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
- error("Cannot initialize RTC with LSI\n");
- }
- // This value is LSI typical value. To be measured precisely using a timer input capture for example.
- rtc_freq = 40000;
- }
-
- // Enable RTC
- __HAL_RCC_RTC_ENABLE();
-
- RtcHandle.Init.HourFormat = RTC_HOURFORMAT_24;
- RtcHandle.Init.AsynchPrediv = 127;
- RtcHandle.Init.SynchPrediv = (rtc_freq / 128) - 1;
- RtcHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
- RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
- RtcHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-
- if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
- error("Cannot initialize RTC\n");
- }
-}
-
-void rtc_free(void)
-{
- // Enable Power clock
- __HAL_RCC_PWR_CLK_ENABLE();
-
- // Enable access to Backup domain
- HAL_PWR_EnableBkUpAccess();
-
- // Reset Backup domain
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
-
- // Disable access to Backup domain
- HAL_PWR_DisableBkUpAccess();
-
- // Disable LSI and LSE clocks
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
- RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
- RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
- HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
- rtc_inited = 0;
-}
-
-int rtc_isenabled(void)
-{
- return rtc_inited;
-}
-
-/*
- RTC Registers
- RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
- RTC_Month 1=january, 2=february, ..., 12=december
- RTC_Date day of the month 1-31
- RTC_Year year 0-99
- struct tm
- tm_sec seconds after the minute 0-61
- tm_min minutes after the hour 0-59
- tm_hour hours since midnight 0-23
- tm_mday day of the month 1-31
- tm_mon months since January 0-11
- tm_year years since 1900
- tm_wday days since Sunday 0-6
- tm_yday days since January 1 0-365
- tm_isdst Daylight Saving Time flag
-*/
-time_t rtc_read(void)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
- struct tm timeinfo;
-
- RtcHandle.Instance = RTC;
-
- // Read actual date and time
- // Warning: the time must be read first!
- HAL_RTC_GetTime(&RtcHandle, &timeStruct, RTC_FORMAT_BIN);
- HAL_RTC_GetDate(&RtcHandle, &dateStruct, RTC_FORMAT_BIN);
-
- // Setup a tm structure based on the RTC
- timeinfo.tm_wday = dateStruct.WeekDay;
- timeinfo.tm_mon = dateStruct.Month - 1;
- timeinfo.tm_mday = dateStruct.Date;
- timeinfo.tm_year = dateStruct.Year + 100;
- timeinfo.tm_hour = timeStruct.Hours;
- timeinfo.tm_min = timeStruct.Minutes;
- timeinfo.tm_sec = timeStruct.Seconds;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t)
-{
- RTC_DateTypeDef dateStruct;
- RTC_TimeTypeDef timeStruct;
-
- RtcHandle.Instance = RTC;
-
- // Convert the time into a tm
- struct tm *timeinfo = localtime(&t);
-
- // Fill RTC structures
- dateStruct.WeekDay = timeinfo->tm_wday;
- dateStruct.Month = timeinfo->tm_mon + 1;
- dateStruct.Date = timeinfo->tm_mday;
- dateStruct.Year = timeinfo->tm_year - 100;
- timeStruct.Hours = timeinfo->tm_hour;
- timeStruct.Minutes = timeinfo->tm_min;
- timeStruct.Seconds = timeinfo->tm_sec;
- timeStruct.TimeFormat = RTC_HOURFORMAT12_PM;
- timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
- timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
-
- // Change the RTC current date/time
- HAL_RTC_SetDate(&RtcHandle, &dateStruct, RTC_FORMAT_BIN);
- HAL_RTC_SetTime(&RtcHandle, &timeStruct, RTC_FORMAT_BIN);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/serial_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,414 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "serial_api.h"
-
-#if DEVICE_SERIAL
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include <string.h>
-#include "PeripheralPins.h"
-
-#define UART_NUM (6)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0, 0};
-
-static uart_irq_handler irq_handler;
-
-UART_HandleTypeDef UartHandle;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-static void init_uart(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- UartHandle.Init.BaudRate = obj->baudrate;
- UartHandle.Init.WordLength = obj->databits;
- UartHandle.Init.StopBits = obj->stopbits;
- UartHandle.Init.Parity = obj->parity;
- UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
- UartHandle.Init.OverSampling = UART_OVERSAMPLING_16;
- UartHandle.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_ENABLE;
-
- if (obj->pin_rx == NC) {
- UartHandle.Init.Mode = UART_MODE_TX;
- } else if (obj->pin_tx == NC) {
- UartHandle.Init.Mode = UART_MODE_RX;
- } else {
- UartHandle.Init.Mode = UART_MODE_TX_RX;
- }
-
- if (HAL_UART_Init(&UartHandle) != HAL_OK) {
- error("Cannot initialize UART\n");
- }
-}
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
- // Determine the UART to use (UART_1, UART_2, ...)
- UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
- UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
- // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
- obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
- MBED_ASSERT(obj->uart != (UARTName)NC);
-
- obj->baudrate = 9600; // Default excepted for LPUART_1 (see below)
-
- // Enable UART clock
- if (obj->uart == UART_1) {
- __HAL_RCC_USART1_CLK_ENABLE();
- obj->index = 0;
- }
-
- if (obj->uart == UART_2) {
- __HAL_RCC_USART2_CLK_ENABLE();
- obj->index = 1;
- }
-
- if (obj->uart == UART_3) {
- __HAL_RCC_USART3_CLK_ENABLE();
- obj->index = 2;
- }
-
- if (obj->uart == UART_4) {
- __HAL_RCC_UART4_CLK_ENABLE();
- obj->index = 3;
- }
-
- if (obj->uart == UART_5) {
- __HAL_RCC_UART5_CLK_ENABLE();
- obj->index = 4;
- }
-
- if (obj->uart == LPUART_1) {
- __HAL_RCC_LPUART1_CLK_ENABLE();
- obj->baudrate = 38400; // Maximum peripheral clock is 4096 x BR -> This is the minimum BR with 80 MHz peripheral clock.
- obj->index = 5;
- }
-
- // Configure the UART pins
- pinmap_pinout(tx, PinMap_UART_TX);
- pinmap_pinout(rx, PinMap_UART_RX);
- if (tx != NC) {
- pin_mode(tx, PullUp);
- }
- if (rx != NC) {
- pin_mode(rx, PullUp);
- }
-
- // Configure UART
- obj->databits = UART_WORDLENGTH_8B;
- obj->stopbits = UART_STOPBITS_1;
- obj->parity = UART_PARITY_NONE;
- obj->pin_tx = tx;
- obj->pin_rx = rx;
-
- init_uart(obj);
-
- // For stdio management
- if (obj->uart == STDIO_UART) {
- stdio_uart_inited = 1;
- memcpy(&stdio_uart, obj, sizeof(serial_t));
- }
-}
-
-void serial_free(serial_t *obj)
-{
- // Reset UART and disable clock
- if (obj->uart == UART_1) {
- __HAL_RCC_USART1_FORCE_RESET();
- __HAL_RCC_USART1_RELEASE_RESET();
- __HAL_RCC_USART1_CLK_DISABLE();
- }
-
- if (obj->uart == UART_2) {
- __HAL_RCC_USART2_FORCE_RESET();
- __HAL_RCC_USART2_RELEASE_RESET();
- __HAL_RCC_USART2_CLK_DISABLE();
- }
-
- if (obj->uart == UART_3) {
- __HAL_RCC_USART3_FORCE_RESET();
- __HAL_RCC_USART3_RELEASE_RESET();
- __HAL_RCC_USART3_CLK_DISABLE();
- }
-
- if (obj->uart == UART_4) {
- __HAL_RCC_UART4_FORCE_RESET();
- __HAL_RCC_UART4_RELEASE_RESET();
- __HAL_RCC_UART4_CLK_DISABLE();
- }
-
- if (obj->uart == UART_5) {
- __HAL_RCC_UART5_FORCE_RESET();
- __HAL_RCC_UART5_RELEASE_RESET();
- __HAL_RCC_UART5_CLK_DISABLE();
- }
-
- if (obj->uart == LPUART_1) {
- __HAL_RCC_LPUART1_FORCE_RESET();
- __HAL_RCC_LPUART1_RELEASE_RESET();
- __HAL_RCC_LPUART1_CLK_DISABLE();
- }
-
- // Configure GPIOs
- pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
- serial_irq_ids[obj->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
- // Check minimum baud rate for 80 MHz peripheral clock
- if ((obj->uart == LPUART_1) && (baudrate < 38400)) {
- error("The minimum baud rate is 38400 for LPUART_1 running at 80 MHz\n");
- }
- obj->baudrate = baudrate;
- init_uart(obj);
-}
-
-void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
-{
- if (data_bits == 9) {
- obj->databits = UART_WORDLENGTH_9B;
- } else {
- obj->databits = UART_WORDLENGTH_8B;
- }
-
- switch (parity) {
- case ParityOdd:
- case ParityForced0:
- obj->parity = UART_PARITY_ODD;
- break;
- case ParityEven:
- case ParityForced1:
- obj->parity = UART_PARITY_EVEN;
- break;
- default: // ParityNone
- obj->parity = UART_PARITY_NONE;
- break;
- }
-
- if (stop_bits == 2) {
- obj->stopbits = UART_STOPBITS_2;
- } else {
- obj->stopbits = UART_STOPBITS_1;
- }
-
- init_uart(obj);
-}
-
-/******************************************************************************
- * INTERRUPTS HANDLING
- ******************************************************************************/
-
-static void uart_irq(UARTName name, int id)
-{
- UartHandle.Instance = (USART_TypeDef *)name;
- if (serial_irq_ids[id] != 0) {
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
- irq_handler(serial_irq_ids[id], TxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
- }
- if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
- irq_handler(serial_irq_ids[id], RxIrq);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
- }
- }
-}
-
-static void uart1_irq(void)
-{
- uart_irq(UART_1, 0);
-}
-
-static void uart2_irq(void)
-{
- uart_irq(UART_2, 1);
-}
-
-static void uart3_irq(void)
-{
- uart_irq(UART_3, 2);
-}
-
-static void uart4_irq(void)
-{
- uart_irq(UART_4, 3);
-}
-
-static void uart5_irq(void)
-{
- uart_irq(UART_5, 4);
-}
-
-static void lpuart1_irq(void)
-{
- uart_irq(LPUART_1, 5);
-}
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
-{
- irq_handler = handler;
- serial_irq_ids[obj->index] = id;
-}
-
-void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
-{
- IRQn_Type irq_n = (IRQn_Type)0;
- uint32_t vector = 0;
-
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
-
- if (obj->uart == UART_1) {
- irq_n = USART1_IRQn;
- vector = (uint32_t)&uart1_irq;
- }
-
- if (obj->uart == UART_2) {
- irq_n = USART2_IRQn;
- vector = (uint32_t)&uart2_irq;
- }
-
- if (obj->uart == UART_3) {
- irq_n = USART3_IRQn;
- vector = (uint32_t)&uart3_irq;
- }
-
- if (obj->uart == UART_4) {
- irq_n = UART4_IRQn;
- vector = (uint32_t)&uart4_irq;
- }
-
- if (obj->uart == UART_5) {
- irq_n = UART5_IRQn;
- vector = (uint32_t)&uart5_irq;
- }
-
- if (obj->uart == LPUART_1) {
- irq_n = LPUART1_IRQn;
- vector = (uint32_t)&lpuart1_irq;
- }
-
- if (enable) {
-
- if (irq == RxIrq) {
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
- } else { // TxIrq
- __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
- }
-
- NVIC_SetVector(irq_n, vector);
- NVIC_EnableIRQ(irq_n);
-
- } else { // disable
-
- int all_disabled = 0;
-
- if (irq == RxIrq) {
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
- // Check if TxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
- } else { // TxIrq
- __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
- // Check if RxIrq is disabled too
- if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
- }
-
- if (all_disabled) NVIC_DisableIRQ(irq_n);
-
- }
-}
-
-/******************************************************************************
- * READ/WRITE
- ******************************************************************************/
-
-int serial_getc(serial_t *obj)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_readable(obj));
- return (int)(uart->RDR & (uint32_t)0xFF);
-}
-
-void serial_putc(serial_t *obj, int c)
-{
- USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
- while (!serial_writable(obj));
- uart->TDR = (uint32_t)(c & (uint32_t)0xFF);
-}
-
-int serial_readable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is received
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-int serial_writable(serial_t *obj)
-{
- int status;
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- // Check if data is transmitted
- status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-void serial_clear(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
- __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
-}
-
-void serial_pinout_tx(PinName tx)
-{
- pinmap_pinout(tx, PinMap_UART_TX);
-}
-
-void serial_break_set(serial_t *obj)
-{
- UartHandle.Instance = (USART_TypeDef *)(obj->uart);
- HAL_LIN_SendBreak(&UartHandle);
-}
-
-void serial_break_clear(serial_t *obj)
-{
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/sleep.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,68 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "sleep_api.h"
-
-#if DEVICE_SLEEP
-
-#include "cmsis.h"
-#include "hal_tick.h"
-
-static TIM_HandleTypeDef TimMasterHandle;
-
-void sleep(void)
-{
- // Disable HAL tick interrupt
- TimMasterHandle.Instance = TIM_MST;
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter SLEEP mode
- HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-void deepsleep(void)
-{
- // Disable HAL tick interrupt
- TimMasterHandle.Instance = TIM_MST;
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-
- // Request to enter STOP mode with regulator in low power mode
- HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
-
- // After wake-up from STOP reconfigure the PLL
- SetSysClock();
-
- // Enable HAL tick interrupt
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/spi_api.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,336 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#include "mbed_assert.h"
-#include "spi_api.h"
-
-#if DEVICE_SPI
-
-#include <math.h>
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "PeripheralPins.h"
-
-static SPI_HandleTypeDef SpiHandle;
-
-static void init_spi(spi_t *obj)
-{
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
-
- __HAL_SPI_DISABLE(&SpiHandle);
-
- SpiHandle.Init.Mode = obj->mode;
- SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
- SpiHandle.Init.Direction = SPI_DIRECTION_2LINES;
- SpiHandle.Init.CLKPhase = obj->cpha;
- SpiHandle.Init.CLKPolarity = obj->cpol;
- SpiHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
- SpiHandle.Init.CRCPolynomial = 7;
- SpiHandle.Init.CRCLength = SPI_CRC_LENGTH_8BIT;
- SpiHandle.Init.DataSize = obj->bits;
- SpiHandle.Init.FirstBit = SPI_FIRSTBIT_MSB;
- SpiHandle.Init.TIMode = SPI_TIMODE_DISABLE;
- SpiHandle.Init.NSS = obj->nss;
- SpiHandle.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
-
- if (HAL_SPI_Init(&SpiHandle) != HAL_OK) {
- error("Cannot initialize SPI\n");
- }
-
- __HAL_SPI_ENABLE(&SpiHandle);
-}
-
-void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
-{
- // Determine the SPI to use
- SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
- SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
- SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
- SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
-
- SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
- SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
-
- obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
- MBED_ASSERT(obj->spi != (SPIName)NC);
-
- // Enable SPI clock
- if (obj->spi == SPI_1) {
- __HAL_RCC_SPI1_CLK_ENABLE();
- }
- if (obj->spi == SPI_2) {
- __HAL_RCC_SPI2_CLK_ENABLE();
- }
- if (obj->spi == SPI_3) {
- __HAL_RCC_SPI3_CLK_ENABLE();
- }
-
- // Configure the SPI pins
- pinmap_pinout(mosi, PinMap_SPI_MOSI);
- pinmap_pinout(miso, PinMap_SPI_MISO);
- pinmap_pinout(sclk, PinMap_SPI_SCLK);
-
- // Save new values
- obj->bits = SPI_DATASIZE_8BIT;
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- obj->br_presc = SPI_BAUDRATEPRESCALER_256;
-
- obj->pin_miso = miso;
- obj->pin_mosi = mosi;
- obj->pin_sclk = sclk;
- obj->pin_ssel = ssel;
-
- if (ssel == NC) { // SW NSS Master mode
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else { // Slave
- pinmap_pinout(ssel, PinMap_SPI_SSEL);
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_free(spi_t *obj)
-{
- // Reset SPI and disable clock
- if (obj->spi == SPI_1) {
- __HAL_RCC_SPI1_FORCE_RESET();
- __HAL_RCC_SPI1_RELEASE_RESET();
- __HAL_RCC_SPI1_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_2) {
- __HAL_RCC_SPI2_FORCE_RESET();
- __HAL_RCC_SPI2_RELEASE_RESET();
- __HAL_RCC_SPI2_CLK_DISABLE();
- }
-
- if (obj->spi == SPI_3) {
- __HAL_RCC_SPI3_FORCE_RESET();
- __HAL_RCC_SPI3_RELEASE_RESET();
- __HAL_RCC_SPI3_CLK_DISABLE();
- }
-
- // Configure GPIO
- pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
- pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-}
-
-void spi_format(spi_t *obj, int bits, int mode, int slave)
-{
- // Save new values
- if (bits == 16) {
- obj->bits = SPI_DATASIZE_16BIT;
- } else {
- obj->bits = SPI_DATASIZE_8BIT;
- }
-
- switch (mode) {
- case 0:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- case 1:
- obj->cpol = SPI_POLARITY_LOW;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- case 2:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_1EDGE;
- break;
- default:
- obj->cpol = SPI_POLARITY_HIGH;
- obj->cpha = SPI_PHASE_2EDGE;
- break;
- }
-
- if (slave == 0) {
- obj->mode = SPI_MODE_MASTER;
- obj->nss = SPI_NSS_SOFT;
- } else {
- obj->mode = SPI_MODE_SLAVE;
- obj->nss = SPI_NSS_HARD_INPUT;
- }
-
- init_spi(obj);
-}
-
-void spi_frequency(spi_t *obj, int hz)
-{
- // Values depend of PCLK1 and PCLK2: 80 MHz if MSI or HSI is used, 48 MHz if HSE is used
- if (SystemCoreClock == 80000000) { // MSI or HSI
- if (hz < 600000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 313 kHz
- } else if ((hz >= 600000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 625 kHz
- } else if ((hz >= 1000000) && (hz < 2000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.25 MHz (default)
- } else if ((hz >= 2000000) && (hz < 5000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 2.5 MHz
- } else if ((hz >= 5000000) && (hz < 10000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 5 MHz
- } else if ((hz >= 10000000) && (hz < 20000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 10 MHz
- } else if ((hz >= 20000000) && (hz < 40000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 20 MHz
- } else { // >= 40000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 40 MHz
- }
- } else { // 48 MHz - HSE
- if (hz < 350000) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 188 kHz
- } else if ((hz >= 350000) && (hz < 750000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 375 kHz
- } else if ((hz >= 750000) && (hz < 1000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 750 kHz
- } else if ((hz >= 1000000) && (hz < 3000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.5 MHz (default)
- } else if ((hz >= 3000000) && (hz < 6000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3 MHz
- } else if ((hz >= 6000000) && (hz < 12000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6 MHz
- } else if ((hz >= 12000000) && (hz < 24000000)) {
- obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 12 MHz
- } else { // >= 24000000
- obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 24 MHz
- }
- }
-
- init_spi(obj);
-}
-
-static inline int ssp_readable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is received
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline int ssp_writeable(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- // Check if data is transmitted
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
- return status;
-}
-
-static inline void ssp_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- //spi->DR = (uint16_t)value;
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-static inline int ssp_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- //return (int)spi->DR;
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-static inline int ssp_busy(spi_t *obj)
-{
- int status;
- SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
- status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
- return status;
-}
-
-int spi_master_write(spi_t *obj, int value)
-{
- ssp_write(obj, value);
- return ssp_read(obj);
-}
-
-int spi_slave_receive(spi_t *obj)
-{
- return (ssp_readable(obj) ? 1 : 0);
-};
-
-int spi_slave_read(spi_t *obj)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_readable(obj));
- //return (int)spi->DR;
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- return (int)(*p_spi_dr);
- } else {
- return (int)spi->DR;
- }
-}
-
-void spi_slave_write(spi_t *obj, int value)
-{
- SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
- while (!ssp_writeable(obj));
- //spi->DR = (uint16_t)value;
- if (obj->bits == SPI_DATASIZE_8BIT) {
- // Force 8-bit access to the data register
- uint8_t *p_spi_dr = 0;
- p_spi_dr = (uint8_t *) & (spi->DR);
- *p_spi_dr = (uint8_t)value;
- } else { // SPI_DATASIZE_16BIT
- spi->DR = (uint16_t)value;
- }
-}
-
-int spi_busy(spi_t *obj)
-{
- return ssp_busy(obj);
-}
-
-#endif
--- a/targets/hal/TARGET_STM/TARGET_STM32L4/us_ticker.c Thu Apr 14 06:45:56 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <stddef.h>
-#include "us_ticker_api.h"
-#include "PeripheralNames.h"
-
-#define TIM_MST TIM5
-
-static TIM_HandleTypeDef TimMasterHandle;
-static int us_ticker_inited = 0;
-
-void us_ticker_init(void)
-{
- if (us_ticker_inited) return;
- us_ticker_inited = 1;
-
- TimMasterHandle.Instance = TIM_MST;
-
- HAL_InitTick(0); // The passed value is not used
-}
-
-uint32_t us_ticker_read()
-{
- if (!us_ticker_inited) us_ticker_init();
- return TIM_MST->CNT;
-}
-
-void us_ticker_set_interrupt(timestamp_t timestamp)
-{
- // Set new output compare value
- __HAL_TIM_SET_COMPARE(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
- // Enable IT
- __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_disable_interrupt(void)
-{
- __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
-}
-
-void us_ticker_clear_interrupt(void)
-{
- __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
-}