long dao
Mbed for VNG board
Fork of
mbed-src
by 
mbed official
Revision 407:bbbab616ce8f, committed 2014-11-19
- Comitter:
- mbed_official
- Date:
- Wed Nov 19 08:30:07 2014 +0000
- Parent:
- 406:7b834b41c730
- Child:
- 408:4dd1c1251ba6
- Commit message:
- Synchronized with git revision 7ff3e68a9620bb9eab1f14ca4522c07d60a8329a
Full URL: https://github.com/mbedmicro/mbed/commit/7ff3e68a9620bb9eab1f14ca4522c07d60a8329a/
Tools: NUCLEO_F302R8 - exporters for gcc_arm and coide
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11U6X/TOOLCHAIN_IAR/TARGET_LPC11U68/LPC11U68.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,44 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0003FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10007FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x800;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __RAM1_start__ = 0x20000000;
+define symbol __RAM1_end__ = 0x200007FF;
+
+define symbol __RAM_USB_start__= 0x20004000;
+define symbol __RAM_USB_end__ = 0x200047FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region RAM1_region = mem:[from __RAM1_start__ to __RAM1_end__];
+define region RAM_USB_region = mem:[from __RAM_USB_start__ to __RAM_USB_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
+place in RAM1_region { section .sram1 };
+place in RAM_USB_region { section .sram_usb };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11U6X/TOOLCHAIN_IAR/TARGET_LPC11U68/startup_LPC11U6X.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,251 @@ +;/***************************************************************************** +; * @file: startup_LPC11u6x.s +; * @purpose: CMSIS Cortex-M0PLUS Core Device Startup File +; * for the NXP LPC11u6x Device Series (manually edited) +; * @version: V1.00 +; * @date: 19. October 2009 +; *---------------------------------------------------------------------------- +; * +; * Copyright (C) 2009 ARM Limited. All rights reserved. +; * +; * ARM Limited (ARM) is supplying this software for use with Cortex-Mx +; * processor based microcontrollers. This file can be freely distributed +; * within development tools that are supporting such ARM based processors. +; * +; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED +; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF +; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. +; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR +; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. +; * +; ******************************************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + PUBLIC __Vectors + PUBLIC __Vectors_End + PUBLIC __Vectors_Size + + DATA + +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler + + DCD NMI_Handler + DCD HardFault_Handler + DCD 0 + DCD 0 + DCD 0 +__vector_table_0x1c + DCD 0 + DCD 0 + DCD 0 + DCD 0 + DCD SVC_Handler + DCD 0 + DCD 0 + DCD PendSV_Handler + DCD SysTick_Handler + + DCD PIN_INT0_IRQHandler ; Pin interrupt 0 + DCD PIN_INT1_IRQHandler ; Pin interrupt 1 + DCD PIN_INT2_IRQHandler ; Pin interrupt 2 + DCD PIN_INT3_IRQHandler ; Pin interrupt 3 + DCD PIN_INT4_IRQHandler ; Pin interrupt 4 + DCD PIN_INT5_IRQHandler ; Pin interrupt 5 + DCD PIN_INT6_IRQHandler ; Pin interrupt 6 + DCD PIN_INT7_IRQHandler ; Pin interrupt 7 + DCD GINT0_IRQHandler ; Port interrupt group 0 + DCD GINT1_IRQHandler ; Port interrupt group 1 + DCD I2C1_IRQHandler ; I2C1 interrupt + DCD USART1_4_IRQHandler ; USARTS 1 and 4 shared interrupt + DCD USART2_3_IRQHandler ; USARTS 2 and 3 shared interrupt + DCD SCT0_1_IRQHandler ; SCT 0 and 1 shared interrupt + DCD SSP1_IRQHandler ; SSP1 interrupt + DCD I2C0_IRQHandler ; I2C0 interrupt + DCD CT16B0_IRQHandler ; CT16B0 (16-bit Timer 0) + DCD CT16B1_IRQHandler ; CT16B1 (16-bit Timer 1) + DCD CT32B0_IRQHandler ; CT32B0 (32-bit Timer 0) + DCD CT32B1_IRQHandler ; CT32B0 (32-bit Timer 1) + DCD SSP0_IRQHandler ; SSP0 interrupt interrupt + DCD USART0_IRQHandler ; USART 0 interrupt interrupt + DCD USB_IRQHandler ; USB IRQ interrupt + DCD USB_FIQ_IRQHandler ; USB FIQ interrupt + DCD ADC_A_IRQHandler ; ADC A sequence (A/D Converter) interrupt + DCD RTC_IRQHandler ; RTC interrupt + DCD BOD_WDT_IRQHandler ; Shared BOD (Brownout Detect) and WDT interrupts + DCD FLASH_IRQHandler ; Flash Memory Controller interrupt + DCD DMA_IRQHandler ; DMA Controller interrupt + DCD ADC_B_IRQHandler ; ADC B sequence interrupt + DCD USBWakeup_IRQHandler ; USB wake-up interrupt + DCD Reserved_IRQHandler + +__Vectors_End + +__Vectors EQU __vector_table +__Vectors_Size EQU __Vectors_End - __Vectors + + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +NMI_Handler + B . + + PUBWEAK HardFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +HardFault_Handler + B . + + PUBWEAK SVC_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SVC_Handler + B . + + PUBWEAK PendSV_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PendSV_Handler + B . + + PUBWEAK SysTick_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SysTick_Handler + B . + + PUBWEAK Reserved_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +Reserved_IRQHandler + B . + + + PUBWEAK PIN_INT0_IRQHandler + PUBWEAK PIN_INT1_IRQHandler + PUBWEAK PIN_INT2_IRQHandler + PUBWEAK PIN_INT3_IRQHandler + PUBWEAK PIN_INT4_IRQHandler + PUBWEAK PIN_INT5_IRQHandler + PUBWEAK PIN_INT6_IRQHandler + PUBWEAK PIN_INT7_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK I2C1_IRQHandler + PUBWEAK USART1_4_IRQHandler + PUBWEAK USART2_3_IRQHandler + PUBWEAK SCT0_1_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C0_IRQHandler + PUBWEAK CT16B0_IRQHandler + PUBWEAK CT16B1_IRQHandler + PUBWEAK CT32B0_IRQHandler + PUBWEAK CT32B1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK USART0_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK USB_FIQ_IRQHandler + PUBWEAK ADC_A_IRQHandler + PUBWEAK RTC_IRQHandler + PUBWEAK BOD_WDT_IRQHandler + PUBWEAK FLASH_IRQHandler + PUBWEAK DMA_IRQHandler + PUBWEAK ADC_B_IRQHandler + PUBWEAK USBWakeup_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB + +PIN_INT0_IRQHandler +PIN_INT1_IRQHandler +PIN_INT2_IRQHandler +PIN_INT3_IRQHandler +PIN_INT4_IRQHandler +PIN_INT5_IRQHandler +PIN_INT6_IRQHandler +PIN_INT7_IRQHandler +GINT0_IRQHandler +GINT1_IRQHandler +I2C1_IRQHandler +USART1_4_IRQHandler +USART2_3_IRQHandler +SCT0_1_IRQHandler +SSP1_IRQHandler +I2C0_IRQHandler +CT16B0_IRQHandler +CT16B1_IRQHandler +CT32B0_IRQHandler +CT32B1_IRQHandler +SSP0_IRQHandler +USART0_IRQHandler +USB_IRQHandler +USB_FIQ_IRQHandler +ADC_A_IRQHandler +RTC_IRQHandler +BOD_WDT_IRQHandler +FLASH_IRQHandler +DMA_IRQHandler +ADC_B_IRQHandler +USBWakeup_IRQHandler +Default_Handler + B Default_Handler + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_301/LPC11U24.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,39 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x00007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x100017DF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x800;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __URAM_start__ = 0x20004000;
+define symbol __URAM_end__ = 0x200047FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region URAM_region = mem:[from __URAM_start__ to __URAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
+place in URAM_region { section USB_PACKET_MEMORY };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_301/startup_LPC11xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,333 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx + DCD FLEX_INT1_IRQHandler + DCD FLEX_INT2_IRQHandler + DCD FLEX_INT3_IRQHandler + DCD FLEX_INT4_IRQHandler + DCD FLEX_INT5_IRQHandler + DCD FLEX_INT6_IRQHandler + DCD FLEX_INT7_IRQHandler + DCD GINT0_IRQHandler + DCD GINT1_IRQHandler ; PIO0 (0:7) + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD USB_IRQHandler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FMC_IRQHandler ; IP2111 Flash Memory Controller + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD USBWakeup_IRQHandler ; USB wake up + DCD Reserved_IRQHandler ; Reserved + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK FLEX_INT0_IRQHandler + PUBWEAK FLEX_INT1_IRQHandler + PUBWEAK FLEX_INT2_IRQHandler + PUBWEAK FLEX_INT3_IRQHandler + PUBWEAK FLEX_INT4_IRQHandler + PUBWEAK FLEX_INT5_IRQHandler + PUBWEAK FLEX_INT6_IRQHandler + PUBWEAK FLEX_INT7_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK USB_FIQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK FMC_IRQHandler + PUBWEAK USBWakeup_IRQHandler + PUBWEAK Reserved_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler: + B . +HardFault_Handler: + B . +MemManage_Handler: + B . +BusFault_Handler: + B . +UsageFault_Handler: + B . +SVC_Handler: + B . +DebugMon_Handler: + B . +PendSV_Handler: + B . +SysTick_Handler: + B . +FLEX_INT0_IRQHandler: + B . +FLEX_INT1_IRQHandler: + B . +FLEX_INT2_IRQHandler: + B . +FLEX_INT3_IRQHandler: + B . +FLEX_INT4_IRQHandler: + B . +FLEX_INT5_IRQHandler: + B . +FLEX_INT6_IRQHandler: + B . +FLEX_INT7_IRQHandler: + B . +GINT0_IRQHandler: + B . +GINT1_IRQHandler: + B . +SSP1_IRQHandler: + B . +I2C_IRQHandler: + B . +TIMER16_0_IRQHandler: + B . +TIMER16_1_IRQHandler: + B . +TIMER32_0_IRQHandler: + B . +TIMER32_1_IRQHandler: + B . +SSP0_IRQHandler: + B . +UART_IRQHandler: + B . +USB_IRQHandler: + B . +USB_FIQHandler: + B . +ADC_IRQHandler: + B . +WDT_IRQHandler: + B . +BOD_IRQHandler: + B . +FMC_IRQHandler: + B . +USBWakeup_IRQHandler: + B . +Reserved_IRQHandler: + B . +Default_Handler: + B . + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_401/LPC11U24.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,39 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x00007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x800;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __URAM_start__ = 0x20004000;
+define symbol __URAM_end__ = 0x200047FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region URAM_region = mem:[from __URAM_start__ to __URAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
+place in URAM_region { section USB_PACKET_MEMORY };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_401/startup_LPC11xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,333 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx + DCD FLEX_INT1_IRQHandler + DCD FLEX_INT2_IRQHandler + DCD FLEX_INT3_IRQHandler + DCD FLEX_INT4_IRQHandler + DCD FLEX_INT5_IRQHandler + DCD FLEX_INT6_IRQHandler + DCD FLEX_INT7_IRQHandler + DCD GINT0_IRQHandler + DCD GINT1_IRQHandler ; PIO0 (0:7) + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD USB_IRQHandler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FMC_IRQHandler ; IP2111 Flash Memory Controller + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD USBWakeup_IRQHandler ; USB wake up + DCD Reserved_IRQHandler ; Reserved + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK FLEX_INT0_IRQHandler + PUBWEAK FLEX_INT1_IRQHandler + PUBWEAK FLEX_INT2_IRQHandler + PUBWEAK FLEX_INT3_IRQHandler + PUBWEAK FLEX_INT4_IRQHandler + PUBWEAK FLEX_INT5_IRQHandler + PUBWEAK FLEX_INT6_IRQHandler + PUBWEAK FLEX_INT7_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK USB_FIQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK FMC_IRQHandler + PUBWEAK USBWakeup_IRQHandler + PUBWEAK Reserved_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler: + B . +HardFault_Handler: + B . +MemManage_Handler: + B . +BusFault_Handler: + B . +UsageFault_Handler: + B . +SVC_Handler: + B . +DebugMon_Handler: + B . +PendSV_Handler: + B . +SysTick_Handler: + B . +FLEX_INT0_IRQHandler: + B . +FLEX_INT1_IRQHandler: + B . +FLEX_INT2_IRQHandler: + B . +FLEX_INT3_IRQHandler: + B . +FLEX_INT4_IRQHandler: + B . +FLEX_INT5_IRQHandler: + B . +FLEX_INT6_IRQHandler: + B . +FLEX_INT7_IRQHandler: + B . +GINT0_IRQHandler: + B . +GINT1_IRQHandler: + B . +SSP1_IRQHandler: + B . +I2C_IRQHandler: + B . +TIMER16_0_IRQHandler: + B . +TIMER16_1_IRQHandler: + B . +TIMER32_0_IRQHandler: + B . +TIMER32_1_IRQHandler: + B . +SSP0_IRQHandler: + B . +UART_IRQHandler: + B . +USB_IRQHandler: + B . +USB_FIQHandler: + B . +ADC_IRQHandler: + B . +WDT_IRQHandler: + B . +BOD_IRQHandler: + B . +FMC_IRQHandler: + B . +USBWakeup_IRQHandler: + B . +Reserved_IRQHandler: + B . +Default_Handler: + B . + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U35_401/LPC11U35.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,39 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x000000C0;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0000FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x800;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __URAM_start__ = 0x20004000;
+define symbol __URAM_end__ = 0x200047FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region URAM_region = mem:[from __URAM_start__ to __URAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
+place in URAM_region { section USB_PACKET_MEMORY };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U35_401/startup_LPC11xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,333 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx + DCD FLEX_INT1_IRQHandler + DCD FLEX_INT2_IRQHandler + DCD FLEX_INT3_IRQHandler + DCD FLEX_INT4_IRQHandler + DCD FLEX_INT5_IRQHandler + DCD FLEX_INT6_IRQHandler + DCD FLEX_INT7_IRQHandler + DCD GINT0_IRQHandler + DCD GINT1_IRQHandler ; PIO0 (0:7) + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD USB_IRQHandler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FMC_IRQHandler ; IP2111 Flash Memory Controller + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD USBWakeup_IRQHandler ; USB wake up + DCD Reserved_IRQHandler ; Reserved + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK FLEX_INT0_IRQHandler + PUBWEAK FLEX_INT1_IRQHandler + PUBWEAK FLEX_INT2_IRQHandler + PUBWEAK FLEX_INT3_IRQHandler + PUBWEAK FLEX_INT4_IRQHandler + PUBWEAK FLEX_INT5_IRQHandler + PUBWEAK FLEX_INT6_IRQHandler + PUBWEAK FLEX_INT7_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK USB_FIQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK FMC_IRQHandler + PUBWEAK USBWakeup_IRQHandler + PUBWEAK Reserved_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler: + B . +HardFault_Handler: + B . +MemManage_Handler: + B . +BusFault_Handler: + B . +UsageFault_Handler: + B . +SVC_Handler: + B . +DebugMon_Handler: + B . +PendSV_Handler: + B . +SysTick_Handler: + B . +FLEX_INT0_IRQHandler: + B . +FLEX_INT1_IRQHandler: + B . +FLEX_INT2_IRQHandler: + B . +FLEX_INT3_IRQHandler: + B . +FLEX_INT4_IRQHandler: + B . +FLEX_INT5_IRQHandler: + B . +FLEX_INT6_IRQHandler: + B . +FLEX_INT7_IRQHandler: + B . +GINT0_IRQHandler: + B . +GINT1_IRQHandler: + B . +SSP1_IRQHandler: + B . +I2C_IRQHandler: + B . +TIMER16_0_IRQHandler: + B . +TIMER16_1_IRQHandler: + B . +TIMER32_0_IRQHandler: + B . +TIMER32_1_IRQHandler: + B . +SSP0_IRQHandler: + B . +UART_IRQHandler: + B . +USB_IRQHandler: + B . +USB_FIQHandler: + B . +ADC_IRQHandler: + B . +WDT_IRQHandler: + B . +BOD_IRQHandler: + B . +FMC_IRQHandler: + B . +USBWakeup_IRQHandler: + B . +Reserved_IRQHandler: + B . +Default_Handler: + B . + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U35_501/LPC11U35.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,44 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x000000C0;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0000FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x800;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __URAM_start__ = 0x20004000;
+define symbol __URAM_end__ = 0x200047FF;
+
+define symbol __SRAM1_start__ = 0x20000000;
+define symbol __SRAM1_end__ = 0x200007FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region URAM_region = mem:[from __URAM_start__ to __URAM_end__];
+define region SRAM1_region = mem:[from __SRAM1_start__ to __SRAM1_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
+place in URAM_region { section USB_PACKET_MEMORY };
+place in SRAM1_region { section .SRAM1 };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U35_501/startup_LPC11xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,333 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx + DCD FLEX_INT1_IRQHandler + DCD FLEX_INT2_IRQHandler + DCD FLEX_INT3_IRQHandler + DCD FLEX_INT4_IRQHandler + DCD FLEX_INT5_IRQHandler + DCD FLEX_INT6_IRQHandler + DCD FLEX_INT7_IRQHandler + DCD GINT0_IRQHandler + DCD GINT1_IRQHandler ; PIO0 (0:7) + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD USB_IRQHandler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FMC_IRQHandler ; IP2111 Flash Memory Controller + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD USBWakeup_IRQHandler ; USB wake up + DCD Reserved_IRQHandler ; Reserved + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK FLEX_INT0_IRQHandler + PUBWEAK FLEX_INT1_IRQHandler + PUBWEAK FLEX_INT2_IRQHandler + PUBWEAK FLEX_INT3_IRQHandler + PUBWEAK FLEX_INT4_IRQHandler + PUBWEAK FLEX_INT5_IRQHandler + PUBWEAK FLEX_INT6_IRQHandler + PUBWEAK FLEX_INT7_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK USB_FIQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK FMC_IRQHandler + PUBWEAK USBWakeup_IRQHandler + PUBWEAK Reserved_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler: + B . +HardFault_Handler: + B . +MemManage_Handler: + B . +BusFault_Handler: + B . +UsageFault_Handler: + B . +SVC_Handler: + B . +DebugMon_Handler: + B . +PendSV_Handler: + B . +SysTick_Handler: + B . +FLEX_INT0_IRQHandler: + B . +FLEX_INT1_IRQHandler: + B . +FLEX_INT2_IRQHandler: + B . +FLEX_INT3_IRQHandler: + B . +FLEX_INT4_IRQHandler: + B . +FLEX_INT5_IRQHandler: + B . +FLEX_INT6_IRQHandler: + B . +FLEX_INT7_IRQHandler: + B . +GINT0_IRQHandler: + B . +GINT1_IRQHandler: + B . +SSP1_IRQHandler: + B . +I2C_IRQHandler: + B . +TIMER16_0_IRQHandler: + B . +TIMER16_1_IRQHandler: + B . +TIMER32_0_IRQHandler: + B . +TIMER32_1_IRQHandler: + B . +SSP0_IRQHandler: + B . +UART_IRQHandler: + B . +USB_IRQHandler: + B . +USB_FIQHandler: + B . +ADC_IRQHandler: + B . +WDT_IRQHandler: + B . +BOD_IRQHandler: + B . +FMC_IRQHandler: + B . +USBWakeup_IRQHandler: + B . +Reserved_IRQHandler: + B . +Default_Handler: + B . + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U37_501/LPC11U37.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,44 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x000000C0;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0001FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x800;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __URAM_start__ = 0x20004000;
+define symbol __URAM_end__ = 0x200047FF;
+
+define symbol __SRAM1_start__ = 0x20000000;
+define symbol __SRAM1_end__ = 0x200007FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region URAM_region = mem:[from __URAM_start__ to __URAM_end__];
+define region SRAM1_region = mem:[from __SRAM1_start__ to __SRAM1_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
+place in URAM_region { section USB_PACKET_MEMORY };
+place in SRAM1_region { section .SRAM1 };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U37_501/startup_LPC11xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,333 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx + DCD FLEX_INT1_IRQHandler + DCD FLEX_INT2_IRQHandler + DCD FLEX_INT3_IRQHandler + DCD FLEX_INT4_IRQHandler + DCD FLEX_INT5_IRQHandler + DCD FLEX_INT6_IRQHandler + DCD FLEX_INT7_IRQHandler + DCD GINT0_IRQHandler + DCD GINT1_IRQHandler ; PIO0 (0:7) + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD USB_IRQHandler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FMC_IRQHandler ; IP2111 Flash Memory Controller + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD USBWakeup_IRQHandler ; USB wake up + DCD Reserved_IRQHandler ; Reserved + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK FLEX_INT0_IRQHandler + PUBWEAK FLEX_INT1_IRQHandler + PUBWEAK FLEX_INT2_IRQHandler + PUBWEAK FLEX_INT3_IRQHandler + PUBWEAK FLEX_INT4_IRQHandler + PUBWEAK FLEX_INT5_IRQHandler + PUBWEAK FLEX_INT6_IRQHandler + PUBWEAK FLEX_INT7_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK USB_FIQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK FMC_IRQHandler + PUBWEAK USBWakeup_IRQHandler + PUBWEAK Reserved_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler: + B . +HardFault_Handler: + B . +MemManage_Handler: + B . +BusFault_Handler: + B . +UsageFault_Handler: + B . +SVC_Handler: + B . +DebugMon_Handler: + B . +PendSV_Handler: + B . +SysTick_Handler: + B . +FLEX_INT0_IRQHandler: + B . +FLEX_INT1_IRQHandler: + B . +FLEX_INT2_IRQHandler: + B . +FLEX_INT3_IRQHandler: + B . +FLEX_INT4_IRQHandler: + B . +FLEX_INT5_IRQHandler: + B . +FLEX_INT6_IRQHandler: + B . +FLEX_INT7_IRQHandler: + B . +GINT0_IRQHandler: + B . +GINT1_IRQHandler: + B . +SSP1_IRQHandler: + B . +I2C_IRQHandler: + B . +TIMER16_0_IRQHandler: + B . +TIMER16_1_IRQHandler: + B . +TIMER32_0_IRQHandler: + B . +TIMER32_1_IRQHandler: + B . +SSP0_IRQHandler: + B . +UART_IRQHandler: + B . +USB_IRQHandler: + B . +USB_FIQHandler: + B . +ADC_IRQHandler: + B . +WDT_IRQHandler: + B . +BOD_IRQHandler: + B . +FMC_IRQHandler: + B . +USBWakeup_IRQHandler: + B . +Reserved_IRQHandler: + B . +Default_Handler: + B . + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_OC_MBUINO/LPC11U24.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,39 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x00007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x800;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __URAM_start__ = 0x20004000;
+define symbol __URAM_end__ = 0x200047FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region URAM_region = mem:[from __URAM_start__ to __URAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
+place in URAM_region { section USB_PACKET_MEMORY };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_OC_MBUINO/startup_LPC11xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,333 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx + DCD FLEX_INT1_IRQHandler + DCD FLEX_INT2_IRQHandler + DCD FLEX_INT3_IRQHandler + DCD FLEX_INT4_IRQHandler + DCD FLEX_INT5_IRQHandler + DCD FLEX_INT6_IRQHandler + DCD FLEX_INT7_IRQHandler + DCD GINT0_IRQHandler + DCD GINT1_IRQHandler ; PIO0 (0:7) + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD USB_IRQHandler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FMC_IRQHandler ; IP2111 Flash Memory Controller + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD USBWakeup_IRQHandler ; USB wake up + DCD Reserved_IRQHandler ; Reserved + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK FLEX_INT0_IRQHandler + PUBWEAK FLEX_INT1_IRQHandler + PUBWEAK FLEX_INT2_IRQHandler + PUBWEAK FLEX_INT3_IRQHandler + PUBWEAK FLEX_INT4_IRQHandler + PUBWEAK FLEX_INT5_IRQHandler + PUBWEAK FLEX_INT6_IRQHandler + PUBWEAK FLEX_INT7_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK USB_FIQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK FMC_IRQHandler + PUBWEAK USBWakeup_IRQHandler + PUBWEAK Reserved_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler: + B . +HardFault_Handler: + B . +MemManage_Handler: + B . +BusFault_Handler: + B . +UsageFault_Handler: + B . +SVC_Handler: + B . +DebugMon_Handler: + B . +PendSV_Handler: + B . +SysTick_Handler: + B . +FLEX_INT0_IRQHandler: + B . +FLEX_INT1_IRQHandler: + B . +FLEX_INT2_IRQHandler: + B . +FLEX_INT3_IRQHandler: + B . +FLEX_INT4_IRQHandler: + B . +FLEX_INT5_IRQHandler: + B . +FLEX_INT6_IRQHandler: + B . +FLEX_INT7_IRQHandler: + B . +GINT0_IRQHandler: + B . +GINT1_IRQHandler: + B . +SSP1_IRQHandler: + B . +I2C_IRQHandler: + B . +TIMER16_0_IRQHandler: + B . +TIMER16_1_IRQHandler: + B . +TIMER32_0_IRQHandler: + B . +TIMER32_1_IRQHandler: + B . +SSP0_IRQHandler: + B . +UART_IRQHandler: + B . +USB_IRQHandler: + B . +USB_FIQHandler: + B . +ADC_IRQHandler: + B . +WDT_IRQHandler: + B . +BOD_IRQHandler: + B . +FMC_IRQHandler: + B . +USBWakeup_IRQHandler: + B . +Reserved_IRQHandler: + B . +Default_Handler: + B . + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_IAR/TARGET_LPC11CXX/LPC11C24.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,34 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x00007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x800;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_IAR/TARGET_LPC11CXX/startup_LPC11xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,299 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD SLWU_INT0_IRQHandler ; Start logic wake-up interrupt 0 + DCD SLWU_INT1_IRQHandler ; Start logic wake-up interrupt 1 + DCD SLWU_INT2_IRQHandler ; Start logic wake-up interrupt 2 + DCD SLWU_INT3_IRQHandler ; Start logic wake-up interrupt 3 + DCD SLWU_INT4_IRQHandler ; Start logic wake-up interrupt 4 + DCD SLWU_INT5_IRQHandler ; Start logic wake-up interrupt 5 + DCD SLWU_INT6_IRQHandler ; Start logic wake-up interrupt 6 + DCD SLWU_INT7_IRQHandler ; Start logic wake-up interrupt 7 + DCD SLWU_INT8_IRQHandler ; Start logic wake-up interrupt 8 + DCD SLWU_INT9_IRQHandler ; Start logic wake-up interrupt 9 + DCD SLWU_INT10_IRQHandler ; Start logic wake-up interrupt 10 + DCD SLWU_INT11_IRQHandler ; Start logic wake-up interrupt 11 + DCD SLWU_INT12_IRQHandler ; Start logic wake-up interrupt 12 + DCD C_CAN_IRQHandler ; C_CAN + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD Reserved_IRQHandler ; Reserved + DCD PIO_3_IRQHandler ; GPIO interrupt status of port 3 + DCD PIO_2_IRQHandler ; GPIO interrupt status of port 2 + DCD PIO_1_IRQHandler ; GPIO interrupt status of port 1 + DCD PIO_0_IRQHandler ; GPIO interrupt status of port 0 + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK SVC_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK Reserved_IRQHandler + PUBWEAK SLWU_INT0_IRQHandler + PUBWEAK SLWU_INT1_IRQHandler + PUBWEAK SLWU_INT2_IRQHandler + PUBWEAK SLWU_INT3_IRQHandler + PUBWEAK SLWU_INT4_IRQHandler + PUBWEAK SLWU_INT5_IRQHandler + PUBWEAK SLWU_INT6_IRQHandler + PUBWEAK SLWU_INT7_IRQHandler + PUBWEAK SLWU_INT8_IRQHandler + PUBWEAK SLWU_INT9_IRQHandler + PUBWEAK SLWU_INT10_IRQHandler + PUBWEAK SLWU_INT11_IRQHandler + PUBWEAK SLWU_INT12_IRQHandler + PUBWEAK C_CAN_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK PIO_3_IRQHandler + PUBWEAK PIO_2_IRQHandler + PUBWEAK PIO_1_IRQHandler + PUBWEAK PIO_0_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB + +NMI_Handler +HardFault_Handler +SVC_Handler +PendSV_Handler +SysTick_Handler +Reserved_IRQHandler +SLWU_INT0_IRQHandler +SLWU_INT1_IRQHandler +SLWU_INT2_IRQHandler +SLWU_INT3_IRQHandler +SLWU_INT4_IRQHandler +SLWU_INT5_IRQHandler +SLWU_INT6_IRQHandler +SLWU_INT7_IRQHandler +SLWU_INT8_IRQHandler +SLWU_INT9_IRQHandler +SLWU_INT10_IRQHandler +SLWU_INT11_IRQHandler +SLWU_INT12_IRQHandler +C_CAN_IRQHandler +SSP1_IRQHandler +I2C_IRQHandler +TIMER16_0_IRQHandler +TIMER16_1_IRQHandler +TIMER32_0_IRQHandler +TIMER32_1_IRQHandler +SSP0_IRQHandler +UART_IRQHandler +ADC_IRQHandler +WDT_IRQHandler +BOD_IRQHandler +PIO_3_IRQHandler +PIO_2_IRQHandler +PIO_1_IRQHandler +PIO_0_IRQHandler +Default_Handler + B Default_Handler + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_IAR/TARGET_LPC11XX/LPC1114.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,34 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x00007FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10000FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x400;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11XX_11CXX/TOOLCHAIN_IAR/TARGET_LPC11XX/startup_LPC11xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,299 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD SLWU_INT0_IRQHandler ; Start logic wake-up interrupt 0 + DCD SLWU_INT1_IRQHandler ; Start logic wake-up interrupt 1 + DCD SLWU_INT2_IRQHandler ; Start logic wake-up interrupt 2 + DCD SLWU_INT3_IRQHandler ; Start logic wake-up interrupt 3 + DCD SLWU_INT4_IRQHandler ; Start logic wake-up interrupt 4 + DCD SLWU_INT5_IRQHandler ; Start logic wake-up interrupt 5 + DCD SLWU_INT6_IRQHandler ; Start logic wake-up interrupt 6 + DCD SLWU_INT7_IRQHandler ; Start logic wake-up interrupt 7 + DCD SLWU_INT8_IRQHandler ; Start logic wake-up interrupt 8 + DCD SLWU_INT9_IRQHandler ; Start logic wake-up interrupt 9 + DCD SLWU_INT10_IRQHandler ; Start logic wake-up interrupt 10 + DCD SLWU_INT11_IRQHandler ; Start logic wake-up interrupt 11 + DCD SLWU_INT12_IRQHandler ; Start logic wake-up interrupt 12 + DCD C_CAN_IRQHandler ; C_CAN + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD Reserved_IRQHandler ; Reserved + DCD PIO_3_IRQHandler ; GPIO interrupt status of port 3 + DCD PIO_2_IRQHandler ; GPIO interrupt status of port 2 + DCD PIO_1_IRQHandler ; GPIO interrupt status of port 1 + DCD PIO_0_IRQHandler ; GPIO interrupt status of port 0 + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK SVC_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK Reserved_IRQHandler + PUBWEAK SLWU_INT0_IRQHandler + PUBWEAK SLWU_INT1_IRQHandler + PUBWEAK SLWU_INT2_IRQHandler + PUBWEAK SLWU_INT3_IRQHandler + PUBWEAK SLWU_INT4_IRQHandler + PUBWEAK SLWU_INT5_IRQHandler + PUBWEAK SLWU_INT6_IRQHandler + PUBWEAK SLWU_INT7_IRQHandler + PUBWEAK SLWU_INT8_IRQHandler + PUBWEAK SLWU_INT9_IRQHandler + PUBWEAK SLWU_INT10_IRQHandler + PUBWEAK SLWU_INT11_IRQHandler + PUBWEAK SLWU_INT12_IRQHandler + PUBWEAK C_CAN_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK PIO_3_IRQHandler + PUBWEAK PIO_2_IRQHandler + PUBWEAK PIO_1_IRQHandler + PUBWEAK PIO_0_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB + +NMI_Handler +HardFault_Handler +SVC_Handler +PendSV_Handler +SysTick_Handler +Reserved_IRQHandler +SLWU_INT0_IRQHandler +SLWU_INT1_IRQHandler +SLWU_INT2_IRQHandler +SLWU_INT3_IRQHandler +SLWU_INT4_IRQHandler +SLWU_INT5_IRQHandler +SLWU_INT6_IRQHandler +SLWU_INT7_IRQHandler +SLWU_INT8_IRQHandler +SLWU_INT9_IRQHandler +SLWU_INT10_IRQHandler +SLWU_INT11_IRQHandler +SLWU_INT12_IRQHandler +C_CAN_IRQHandler +SSP1_IRQHandler +I2C_IRQHandler +TIMER16_0_IRQHandler +TIMER16_1_IRQHandler +TIMER32_0_IRQHandler +TIMER32_1_IRQHandler +SSP0_IRQHandler +UART_IRQHandler +ADC_IRQHandler +WDT_IRQHandler +BOD_IRQHandler +PIO_3_IRQHandler +PIO_2_IRQHandler +PIO_1_IRQHandler +PIO_0_IRQHandler +Default_Handler + B Default_Handler + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC15XX/TOOLCHAIN_IAR/LPC15xx.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,34 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0003FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x02000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x02008FDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x1000;
+define symbol __ICFEDIT_size_heap__ = 0x2000;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC15XX/TOOLCHAIN_IAR/startup_LPC15xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,274 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2009 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + PUBLIC __Vectors + PUBLIC __Vectors_End + PUBLIC __Vectors_Size + + DATA + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + +; External Interrupts + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FLASH_IRQHandler ; NVMC Flash Controller + DCD EE_IRQHandler ; NVMC EE Controller + DCD DMA_IRQHandler ; DMA Controller + DCD GINT0_IRQHandler + DCD GINT1_IRQHandler ; PIO0 (0:7) + DCD PIN_INT0_IRQHandler ; 16+ 7 Pin interrupt 0 or pattern match engine slice 0 interrupt + DCD PIN_INT1_IRQHandler ; 16+ 8 Pin interrupt 1 or pattern match engine slice 1 interrupt + DCD PIN_INT2_IRQHandler ; 16+ 9 Pin interrupt 2 or pattern match engine slice 2 interrupt + DCD PIN_INT3_IRQHandler ; 16+10 Pin interrupt 3 or pattern match engine slice 3 interrupt + DCD PIN_INT4_IRQHandler ; 16+11 Pin interrupt 4 or pattern match engine slice 4 interrupt + DCD PIN_INT5_IRQHandler ; 16+12 Pin interrupt 5 or pattern match engine slice 5 interrupt + DCD PIN_INT6_IRQHandler ; 16+13 Pin interrupt 6 or pattern match engine slice 6 interrupt + DCD PIN_INT7_IRQHandler ; 16+14 Pin interrupt 7 or pattern match engine slice 7 interrupt + DCD RIT_IRQHandler ; RIT Timer + DCD SCT0_IRQHandler ; SCT Timer0 + DCD SCT1_IRQHandler ; SCT Timer1 + DCD SCT2_IRQHandler ; SCT Timer2 + DCD SCT3_IRQHandler ; SCT Timer3 + DCD MRT_IRQHandler ; MRT timer + DCD UART0_IRQHandler ; MIN UART0 + DCD UART1_IRQHandler ; MIN UART1 + DCD UART2_IRQHandler ; MIN UART2 + DCD I2C0_IRQHandler ; BI2C + DCD SPI0_IRQHandler ; LSPI0 + DCD SPI1_IRQHandler ; LSPI1 + DCD C_CAN0_IRQHandler ; CAN + DCD USB_IRQ_IRQHandler ; USB IRQ + DCD USB_FIQ_IRQHandler ; USB FIQ + DCD USBWakeup_IRQHandler ; USB wake up + DCD ADC0_SEQA_IRQHandler ; ADC0 SEQA + DCD ADC0_SEQB_IRQHandler ; ADC0 SEQB + DCD ADC0_THCMP_IRQHandler ; ADC0 THCMP + DCD ADC0_OVR_IRQHandler ; ADC0 OVR + DCD ADC1_SEQA_IRQHandler ; ADC1 SEQA + DCD ADC1_SEQB_IRQHandler ; ADC1 SEQB + DCD ADC1_THCMP_IRQHandler ; ADC1 THCMP + DCD ADC1_OVR_IRQHandler ; ADC1 OVR + DCD DAC_IRQHandler ; D/A Converter + DCD CMP0_IRQHandler ; Comparator 0 + DCD CMP1_IRQHandler ; Comparator 1 + DCD CMP2_IRQHandler ; Comparator 2 + DCD CMP3_IRQHandler ; Comparator 3 + DCD QEI_IRQHandler ; QEI + DCD RTC_ALARM_IRQHandler ; RTC Alarm + DCD RTC_WAKE_IRQHandler ; RTC Wake + +__Vectors_End + +__Vectors EQU __vector_table +__Vectors_Size EQU __Vectors_End - __Vectors + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK FLASH_IRQHandler + PUBWEAK EE_IRQHandler + PUBWEAK DMA_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK PIN_INT0_IRQHandler + PUBWEAK PIN_INT1_IRQHandler + PUBWEAK PIN_INT2_IRQHandler + PUBWEAK PIN_INT3_IRQHandler + PUBWEAK PIN_INT4_IRQHandler + PUBWEAK PIN_INT5_IRQHandler + PUBWEAK PIN_INT6_IRQHandler + PUBWEAK PIN_INT7_IRQHandler + PUBWEAK RIT_IRQHandler + PUBWEAK SCT0_IRQHandler + PUBWEAK SCT1_IRQHandler + PUBWEAK SCT2_IRQHandler + PUBWEAK SCT3_IRQHandler + PUBWEAK MRT_IRQHandler + PUBWEAK UART0_IRQHandler + PUBWEAK UART1_IRQHandler + PUBWEAK UART2_IRQHandler + PUBWEAK I2C0_IRQHandler + PUBWEAK SPI0_IRQHandler + PUBWEAK SPI1_IRQHandler + PUBWEAK C_CAN0_IRQHandler + PUBWEAK USB_IRQ_IRQHandler + PUBWEAK USB_FIQ_IRQHandler + PUBWEAK USBWakeup_IRQHandler + PUBWEAK ADC0_SEQA_IRQHandler + PUBWEAK ADC0_SEQB_IRQHandler + PUBWEAK ADC0_THCMP_IRQHandler + PUBWEAK ADC0_OVR_IRQHandler + PUBWEAK ADC1_SEQA_IRQHandler + PUBWEAK ADC1_SEQB_IRQHandler + PUBWEAK ADC1_THCMP_IRQHandler + PUBWEAK ADC1_OVR_IRQHandler + PUBWEAK DAC_IRQHandler + PUBWEAK CMP0_IRQHandler + PUBWEAK CMP1_IRQHandler + PUBWEAK CMP2_IRQHandler + PUBWEAK CMP3_IRQHandler + PUBWEAK QEI_IRQHandler + PUBWEAK RTC_ALARM_IRQHandler + PUBWEAK RTC_WAKE_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB + +NMI_Handler +HardFault_Handler +MemManage_Handler +BusFault_Handler +UsageFault_Handler +SVC_Handler +DebugMon_Handler +PendSV_Handler +SysTick_Handler +WDT_IRQHandler +BOD_IRQHandler +FLASH_IRQHandler +EE_IRQHandler +DMA_IRQHandler +GINT0_IRQHandler +GINT1_IRQHandler +PIN_INT0_IRQHandler +PIN_INT1_IRQHandler +PIN_INT2_IRQHandler +PIN_INT3_IRQHandler +PIN_INT4_IRQHandler +PIN_INT5_IRQHandler +PIN_INT6_IRQHandler +PIN_INT7_IRQHandler +RIT_IRQHandler +SCT0_IRQHandler +SCT1_IRQHandler +SCT2_IRQHandler +SCT3_IRQHandler +MRT_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +I2C0_IRQHandler +SPI0_IRQHandler +SPI1_IRQHandler +C_CAN0_IRQHandler +USB_IRQ_IRQHandler +USB_FIQ_IRQHandler +USBWakeup_IRQHandler +ADC0_SEQA_IRQHandler +ADC0_SEQB_IRQHandler +ADC0_THCMP_IRQHandler +ADC0_OVR_IRQHandler +ADC1_SEQA_IRQHandler +ADC1_SEQB_IRQHandler +ADC1_THCMP_IRQHandler +ADC1_OVR_IRQHandler +DAC_IRQHandler +CMP0_IRQHandler +CMP1_IRQHandler +CMP2_IRQHandler +CMP3_IRQHandler +QEI_IRQHandler +RTC_ALARM_IRQHandler +RTC_WAKE_IRQHandler +Default_Handler + B Default_Handler + + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +CRP1 0x12345678 - Write to RAM command can not access RAM below 0x10000200. + - Read Memory command: disabled. + - Copy RAM to Flash command: cannot write to Sector 0. + - "Go" command: disabled. + - Erase sector(s) command: can erase any individual sector except + sector 0 only, or can erase all sectors at once. + - Compare command: disabled +CRP2 0x87654321 - Write to RAM command: disabled. + - Copy RAM to Flash: disabled. + - Erase command: only allows erase of all sectors. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC408X/TOOLCHAIN_IAR/LPC4088.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,39 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0007FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x1000FFDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x800;
+define symbol __ICFEDIT_size_heap__ = 0x1000;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __RAM1_start__ = 0x20000000;
+define symbol __RAM1_end__ = 0x20007FFF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+define region RAM1_region = mem:[from __RAM1_start__ to __RAM1_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
+place in RAM1_region { section .sram };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC408X/TOOLCHAIN_IAR/startup_LPC408x.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,256 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2011 IAR Systems. All rights reserved. + * + * $Revision: 47876 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + PUBLIC __Vectors + PUBLIC __Vectors_End + PUBLIC __Vectors_Size + + DATA + +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler + DCD NMI_Handler + DCD HardFault_Handler + DCD MemManage_Handler + DCD BusFault_Handler + DCD UsageFault_Handler +__vector_table_0x1c + DCD 0xEFFFF39E ; Reserved- vector sum + DCD 0 + DCD 0 + DCD 0 + DCD SVC_Handler + DCD DebugMon_Handler + DCD 0 + DCD PendSV_Handler + DCD SysTick_Handler + + ; External Interrupts + DCD WDT_IRQHandler ; 16: Watchdog Timer + DCD TIMER0_IRQHandler ; 17: Timer0 + DCD TIMER1_IRQHandler ; 18: Timer1 + DCD TIMER2_IRQHandler ; 19: Timer2 + DCD TIMER3_IRQHandler ; 20: Timer3 + DCD UART0_IRQHandler ; 21: UART0 + DCD UART1_IRQHandler ; 22: UART1 + DCD UART2_IRQHandler ; 23: UART2 + DCD UART3_IRQHandler ; 24: UART3 + DCD PWM1_IRQHandler ; 25: PWM1 + DCD I2C0_IRQHandler ; 26: I2C0 + DCD I2C1_IRQHandler ; 27: I2C1 + DCD I2C2_IRQHandler ; 28: I2C2 + DCD 0 ; 29: reserved, not for SPIFI anymore + DCD SSP0_IRQHandler ; 30: SSP0 + DCD SSP1_IRQHandler ; 31: SSP1 + DCD PLL0_IRQHandler ; 32: PLL0 Lock (Main PLL) + DCD RTC_IRQHandler ; 33: Real Time Clock + DCD EINT0_IRQHandler ; 34: External Interrupt 0 + DCD EINT1_IRQHandler ; 35: External Interrupt 1 + DCD EINT2_IRQHandler ; 36: External Interrupt 2 + DCD EINT3_IRQHandler ; 37: External Interrupt 3 + DCD ADC_IRQHandler ; 38: A/D Converter + DCD BOD_IRQHandler ; 39: Brown-Out Detect + DCD USB_IRQHandler ; 40: USB + DCD CAN_IRQHandler ; 41: CAN + DCD DMA_IRQHandler ; 42: General Purpose DMA + DCD I2S_IRQHandler ; 43: I2S + DCD ENET_IRQHandler ; 44: Ethernet + DCD MCI_IRQHandler ; 45: SD/MMC card I/F + DCD MCPWM_IRQHandler ; 46: Motor Control PWM + DCD QEI_IRQHandler ; 47: Quadrature Encoder Interface + DCD PLL1_IRQHandler ; 48: PLL1 Lock (USB PLL) + DCD USBActivity_IRQHandler ; 49: USB Activity interrupt to wakeup + DCD CANActivity_IRQHandler ; 50: CAN Activity interrupt to wakeup + DCD UART4_IRQHandler ; 51: UART4 + DCD SSP2_IRQHandler ; 52: SSP2 + DCD LCD_IRQHandler ; 53: LCD + DCD GPIO_IRQHandler ; 54: GPIO + DCD PWM0_IRQHandler ; 55: PWM0 + DCD EEPROM_IRQHandler ; 56: EEPROM +__Vectors_End + +__Vectors EQU __vector_table +__Vectors_Size EQU __Vectors_End - __Vectors + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK WDT_IRQHandler + PUBWEAK TIMER0_IRQHandler + PUBWEAK TIMER1_IRQHandler + PUBWEAK TIMER2_IRQHandler + PUBWEAK TIMER3_IRQHandler + PUBWEAK UART0_IRQHandler + PUBWEAK UART1_IRQHandler + PUBWEAK UART2_IRQHandler + PUBWEAK UART3_IRQHandler + PUBWEAK PWM1_IRQHandler + PUBWEAK I2C0_IRQHandler + PUBWEAK I2C1_IRQHandler + PUBWEAK I2C2_IRQHandler +;SPIFI_IRQHandler ;not used + PUBWEAK SSP0_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK PLL0_IRQHandler + PUBWEAK RTC_IRQHandler + PUBWEAK EINT0_IRQHandler + PUBWEAK EINT1_IRQHandler + PUBWEAK EINT2_IRQHandler + PUBWEAK EINT3_IRQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK CAN_IRQHandler + PUBWEAK DMA_IRQHandler + PUBWEAK I2S_IRQHandler + PUBWEAK ENET_IRQHandler + PUBWEAK MCI_IRQHandler + PUBWEAK MCPWM_IRQHandler + PUBWEAK QEI_IRQHandler + PUBWEAK PLL1_IRQHandler + PUBWEAK USBActivity_IRQHandler + PUBWEAK CANActivity_IRQHandler + PUBWEAK UART4_IRQHandler + PUBWEAK SSP2_IRQHandler + PUBWEAK LCD_IRQHandler + PUBWEAK GPIO_IRQHandler + PUBWEAK PWM0_IRQHandler + PUBWEAK EEPROM_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler +HardFault_Handler +MemManage_Handler +BusFault_Handler +UsageFault_Handler +SVC_Handler +DebugMon_Handler +PendSV_Handler +SysTick_Handler +WDT_IRQHandler +TIMER0_IRQHandler +TIMER1_IRQHandler +TIMER2_IRQHandler +TIMER3_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +UART3_IRQHandler +PWM1_IRQHandler +I2C0_IRQHandler +I2C1_IRQHandler +I2C2_IRQHandler +;SPIFI_IRQHandler ;not used +SSP0_IRQHandler +SSP1_IRQHandler +PLL0_IRQHandler +RTC_IRQHandler +EINT0_IRQHandler +EINT1_IRQHandler +EINT2_IRQHandler +EINT3_IRQHandler +ADC_IRQHandler +BOD_IRQHandler +USB_IRQHandler +CAN_IRQHandler +DMA_IRQHandler +I2S_IRQHandler +ENET_IRQHandler +MCI_IRQHandler +MCPWM_IRQHandler +QEI_IRQHandler +PLL1_IRQHandler +USBActivity_IRQHandler +CANActivity_IRQHandler +UART4_IRQHandler +SSP2_IRQHandler +LCD_IRQHandler +GPIO_IRQHandler +PWM0_IRQHandler +EEPROM_IRQHandler +Default_IRQHandler + B Default_IRQHandler + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC810/TOOLCHAIN_IAR/LPC810.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,34 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x00000FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x100003FF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x100;
+define symbol __ICFEDIT_size_heap__ = 0x100;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC810/TOOLCHAIN_IAR/startup_LPC8xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,197 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2011 IAR Systems. All rights reserved. + * + * $Revision: 47876 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + PUBLIC __Vectors + PUBLIC __Vectors_End + PUBLIC __Vectors_Size + + DATA + +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler + DCD NMI_Handler + DCD HardFault_Handler + DCD 0 + DCD 0 + DCD 0 +__vector_table_0x1c + DCD 0 + DCD 0 + DCD 0 + DCD 0 + DCD SVC_Handler + DCD 0 + DCD 0 + DCD PendSV_Handler + DCD SysTick_Handler + + ; External Interrupts + DCD SPI0_IRQHandler ; SPI0 controller + DCD SPI1_IRQHandler ; SPI1 controller + DCD 0 ; Reserved + DCD UART0_IRQHandler ; UART0 + DCD UART1_IRQHandler ; UART1 + DCD UART2_IRQHandler ; UART2 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD I2C_IRQHandler ; I2C controller + DCD SCT_IRQHandler ; Smart Counter Timer + DCD MRT_IRQHandler ; Multi-Rate Timer + DCD CMP_IRQHandler ; Comparator + DCD WDT_IRQHandler ; PIO1 (0:11) + DCD BOD_IRQHandler ; Brown Out Detect + DCD 0 ; Reserved + DCD WKT_IRQHandler ; Wakeup timer + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PININT0_IRQHandler ; PIO INT0 + DCD PININT1_IRQHandler ; PIO INT1 + DCD PININT2_IRQHandler ; PIO INT2 + DCD PININT3_IRQHandler ; PIO INT3 + DCD PININT4_IRQHandler ; PIO INT4 + DCD PININT5_IRQHandler ; PIO INT5 + DCD PININT6_IRQHandler ; PIO INT6 + DCD PININT7_IRQHandler ; PIO INT7 +__Vectors_End + +__Vectors EQU __vector_table +__Vectors_Size EQU __Vectors_End - __Vectors + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK SVC_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK SPI0_IRQHandler + PUBWEAK SPI1_IRQHandler + PUBWEAK UART0_IRQHandler + PUBWEAK UART1_IRQHandler + PUBWEAK UART2_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK SCT_IRQHandler + PUBWEAK MRT_IRQHandler + PUBWEAK CMP_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK WKT_IRQHandler + PUBWEAK PININT0_IRQHandler + PUBWEAK PININT1_IRQHandler + PUBWEAK PININT2_IRQHandler + PUBWEAK PININT3_IRQHandler + PUBWEAK PININT4_IRQHandler + PUBWEAK PININT5_IRQHandler + PUBWEAK PININT6_IRQHandler + PUBWEAK PININT7_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler +HardFault_Handler +SVC_Handler +PendSV_Handler +SysTick_Handler +SPI0_IRQHandler +SPI1_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +I2C_IRQHandler +SCT_IRQHandler +MRT_IRQHandler +CMP_IRQHandler +WDT_IRQHandler +BOD_IRQHandler +WKT_IRQHandler +PININT0_IRQHandler +PININT1_IRQHandler +PININT2_IRQHandler +PININT3_IRQHandler +PININT4_IRQHandler +PININT5_IRQHandler +PININT6_IRQHandler +PININT7_IRQHandler +Default_IRQHandler + B Default_IRQHandler + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC812/TOOLCHAIN_IAR/LPC812.icf Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,34 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x00003FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10000FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x200;
+define symbol __ICFEDIT_size_heap__ = 0x400;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
+place in CRP_region { section .crp };
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC812/TOOLCHAIN_IAR/startup_LPC8xx.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,198 @@ +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2011 IAR Systems. All rights reserved. + * + * $Revision: 47876 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + PUBLIC __Vectors + PUBLIC __Vectors_End + PUBLIC __Vectors_Size + + DATA + +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler + DCD NMI_Handler + DCD HardFault_Handler + DCD 0 + DCD 0 + DCD 0 +__vector_table_0x1c + DCD 0 + DCD 0 + DCD 0 + DCD 0 + DCD SVC_Handler + DCD 0 + DCD 0 + DCD PendSV_Handler + DCD SysTick_Handler + + ; External Interrupts + DCD SPI0_IRQHandler ; SPI0 controller + DCD SPI1_IRQHandler ; SPI1 controller + DCD 0 ; Reserved + DCD UART0_IRQHandler ; UART0 + DCD UART1_IRQHandler ; UART1 + DCD UART2_IRQHandler ; UART2 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD I2C_IRQHandler ; I2C controller + DCD SCT_IRQHandler ; Smart Counter Timer + DCD MRT_IRQHandler ; Multi-Rate Timer + DCD CMP_IRQHandler ; Comparator + DCD WDT_IRQHandler ; PIO1 (0:11) + DCD BOD_IRQHandler ; Brown Out Detect + DCD 0 ; Reserved + DCD WKT_IRQHandler ; Wakeup timer + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PININT0_IRQHandler ; PIO INT0 + DCD PININT1_IRQHandler ; PIO INT1 + DCD PININT2_IRQHandler ; PIO INT2 + DCD PININT3_IRQHandler ; PIO INT3 + DCD PININT4_IRQHandler ; PIO INT4 + DCD PININT5_IRQHandler ; PIO INT5 + DCD PININT6_IRQHandler ; PIO INT6 + DCD PININT7_IRQHandler ; PIO INT7 +__Vectors_End + +__Vectors EQU __vector_table +__Vectors_Size EQU __Vectors_End - __Vectors + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK SVC_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK SPI0_IRQHandler + PUBWEAK SPI1_IRQHandler + PUBWEAK UART0_IRQHandler + PUBWEAK UART1_IRQHandler + PUBWEAK UART2_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK SCT_IRQHandler + PUBWEAK MRT_IRQHandler + PUBWEAK CMP_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK WKT_IRQHandler + PUBWEAK PININT0_IRQHandler + PUBWEAK PININT1_IRQHandler + PUBWEAK PININT2_IRQHandler + PUBWEAK PININT3_IRQHandler + PUBWEAK PININT4_IRQHandler + PUBWEAK PININT5_IRQHandler + PUBWEAK PININT6_IRQHandler + PUBWEAK PININT7_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB + +NMI_Handler +HardFault_Handler +SVC_Handler +PendSV_Handler +SysTick_Handler +SPI0_IRQHandler +SPI1_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +I2C_IRQHandler +SCT_IRQHandler +MRT_IRQHandler +CMP_IRQHandler +WDT_IRQHandler +BOD_IRQHandler +WKT_IRQHandler +PININT0_IRQHandler +PININT1_IRQHandler +PININT2_IRQHandler +PININT3_IRQHandler +PININT4_IRQHandler +PININT5_IRQHandler +PININT6_IRQHandler +PININT7_IRQHandler +Default_IRQHandler + B Default_IRQHandler + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END
--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F103RB/system_stm32f10x.c Tue Nov 18 10:30:06 2014 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F103RB/system_stm32f10x.c Wed Nov 19 08:30:07 2014 +0000 @@ -230,6 +230,8 @@ /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ /* Configure the Flash Latency cycles and enable prefetch buffer */ SetSysClock(); + + SystemCoreClockUpdate(); } /**
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/STM32F302X8_FLASH.ld Wed Nov 19 08:30:07 2014 +0000
@@ -0,0 +1,167 @@
+/*
+*****************************************************************************
+**
+** File : STM32F302X8_FLASH.ld
+**
+** Abstract : Linker script for STM32F302x8 device with
+** 64-KByte FLASH, 16-KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Environment : Atollic TrueSTUDIO(R)
+**
+** Distribution: The file is distributed as is, without any warranty
+** of any kind.
+**
+** (c)Copyright Atollic AB.
+** You may use this file as-is or modify it according to the needs of your
+** project. This file may only be built (assembled or compiled and linked)
+** using the Atollic TrueSTUDIO(R) product. The use of this file together
+** with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20003FFF; /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
+RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 16K - 0x188
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ PROVIDE ( __end__ = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F3/TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/startup_stm32f302x8.s Wed Nov 19 08:30:07 2014 +0000 @@ -0,0 +1,423 @@ +/** + ****************************************************************************** + * @file startup_stm32f302x8.s + * @author MCD Application Team + * @version V2.0.1 + * @date 18-June-2014 + * @brief STM32F302x6/STM32F302x8 devices vector table for + * Atollic TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address, + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF1E0F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* Atollic update: set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMP_STAMP_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_TSC_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word USB_HP_CAN_TX_IRQHandler + .word USB_LP_CAN_RX0_IRQHandler + .word CAN_RX1_IRQHandler + .word CAN_SCE_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_TIM15_IRQHandler + .word TIM1_UP_TIM16_IRQHandler + .word TIM1_TRG_COM_TIM17_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word 0 + .word 0 + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word 0 + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word USBWakeUp_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SPI3_IRQHandler + .word 0 + .word 0 + .word TIM6_DAC_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word COMP2_IRQHandler + .word COMP4_6_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word I2C3_EV_IRQHandler + .word I2C3_ER_IRQHandler + .word USB_HP_IRQHandler + .word USB_LP_IRQHandler + .word USBWakeUp_RMP_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word FPU_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_TSC_IRQHandler + .thumb_set EXTI2_TSC_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak USB_HP_CAN_TX_IRQHandler + .thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler + + .weak USB_LP_CAN_RX0_IRQHandler + .thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler + + .weak CAN_RX1_IRQHandler + .thumb_set CAN_RX1_IRQHandler,Default_Handler + + .weak CAN_SCE_IRQHandler + .thumb_set CAN_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM15_IRQHandler + .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM17_IRQHandler + .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak USBWakeUp_IRQHandler + .thumb_set USBWakeUp_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak COMP2_IRQHandler + .thumb_set COMP2_IRQHandler,Default_Handler + + .weak COMP4_6_IRQHandler + .thumb_set COMP4_6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak USB_HP_IRQHandler + .thumb_set USB_HP_IRQHandler,Default_Handler + + .weak USB_LP_IRQHandler + .thumb_set USB_LP_IRQHandler,Default_Handler + + .weak USBWakeUp_RMP_IRQHandler + .thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/serial_api.c Tue Nov 18 10:30:06 2014 +0000
+++ b/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/serial_api.c Wed Nov 19 08:30:07 2014 +0000
@@ -29,13 +29,14 @@
static uint32_t serial_irq_ids[UART_NUM] = {0};
static uart_irq_handler irq_handler;
-static uint32_t acceptedSpeeds[16][2] = {{1200, UART_BAUDRATE_BAUDRATE_Baud1200},
+static uint32_t acceptedSpeeds[17][2] = {{1200, UART_BAUDRATE_BAUDRATE_Baud1200},
{2400, UART_BAUDRATE_BAUDRATE_Baud2400},
{4800, UART_BAUDRATE_BAUDRATE_Baud4800},
{9600, UART_BAUDRATE_BAUDRATE_Baud9600},
{14400, UART_BAUDRATE_BAUDRATE_Baud14400},
{19200, UART_BAUDRATE_BAUDRATE_Baud19200},
{28800, UART_BAUDRATE_BAUDRATE_Baud28800},
+ {31250, (0x00800000UL) /* 31250 baud */},
{38400, UART_BAUDRATE_BAUDRATE_Baud38400},
{57600, UART_BAUDRATE_BAUDRATE_Baud57600},
{76800, UART_BAUDRATE_BAUDRATE_Baud76800},
@@ -109,7 +110,7 @@
return;
}
- for (int i = 1; i<16; i++) {
+ for (int i = 1; i<17; i++) {
if (baudrate<acceptedSpeeds[i][0]) {
obj->uart->BAUDRATE = acceptedSpeeds[i - 1][1];
return;