Revision 2:b5af09b0d540, committed 2013-10-04

Comitter:

itotaka

Date:

Fri Oct 04 12:19:39 2013 +0000

Parent:

1:63b72e393989

Commit message:

to share

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EthernetNetIf.lib	Fri Oct 04 12:19:39 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mamezu/code/EthernetNetIf/#0f6c82fcde82

--- a/example-processing.h	Fri Jul 26 22:10:20 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,52 +0,0 @@
-/* EXAMPLE SEND/RECEIVE on PROCESSING:
-
-// oscP5sendreceive by andreas schlegel
-// example shows how to send and receive osc messages.
-// oscP5 website at http://www.sojamo.de/oscP5
-
-*/
-
-import oscP5.*;
-import netP5.*;
-
-OscP5 oscP5;
-NetAddress myRemoteLocation;
-
-void setup() {
-  size(400,400);
-  frameRate(25);
-  // start oscP5, listening for incoming messages at port 12000
-  oscP5 = new OscP5(this,12000);
-
-  // myRemoteLocation is a NetAddress. a NetAddress takes 2 parameters,
-  // an ip address and a port number. myRemoteLocation is used as parameter in
-  // oscP5.send() when sending osc packets to another computer, device,
-  // application. usage see below. for testing purposes the listening port
-  // and the port of the remote location address are the same, hence you will
-  // send messages back to this sketch.
-  myRemoteLocation = new NetAddress("10.0.0.2",10000);
-}
-
-
-void draw() {
-  background(0);
-}
-
-void mousePressed() {
-  // in the following different ways of creating osc messages are shown by example
-  OscMessage myMessage = new OscMessage("/mbed/test1");
-
-  myMessage.add(123); // add an int to the osc message
-
-  // send the message
-  oscP5.send(myMessage, myRemoteLocation);
-}
-
-
-// incoming osc message are forwarded to the oscEvent method.
-void oscEvent(OscMessage theOscMessage) {
-  // print the address pattern and the typetag of the received OscMessage
-  print("### received an osc message.");
-  print(" addrpattern: "+theOscMessage.addrPattern());
-  println(" typetag: "+theOscMessage.typetag());
-}

--- a/example.h	Fri Jul 26 22:10:20 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,117 +0,0 @@
-#include "mbed.h"
-#include "mbedOSC.h"
-
-//// ETHERNET
-
-// Ethernet can be created with *either* an address assigned by DHCP or a static IP address. Uncomment the define line for DHCP
-//#define DHCP
-#ifdef DHCP
-EthernetNetIf eth;
-#else
-EthernetNetIf eth(
-    IpAddr(10,0,0,2), //IP Address
-    IpAddr(255,255,255,0), //Network Mask
-    IpAddr(10,0,0,1), //Gateway
-    IpAddr(10,0,0,1)  //DNS
-);
-#endif
-
-//// OSC
-
-// The object to do the work of sending and receiving
-OSCClass osc;
-
-// The message objects to send and receive with
-OSCMessage recMes;
-OSCMessage sendMes;
-
-// Setting - The port we're listening to on the mbed for OSC messages
-int  mbedListenPort  = 10000;
-
-// Setting - The address and port we're going to send to, from the mbed
-uint8_t destIp[]  = { 10, 0, 0, 1};
-int  destPort = 12000;
-
-//// mbed input
-
-DigitalIn button(p21);
-bool buttonLastState;
-
-//// Our messageReceivedCallback function
-void processOSC() {
-
-    // If this function has been called, the OSC message just received will have been parsed into our recMes OSCMessage object
-    // Note we can access recMes here, outside of the main loop, as we created it as a global variable.
-
-    // TASK: If this message one we want, do something about it.
-    // In this example we're listening for messages with a top address of "mbed".
-    // Note the strcmp function returns 0 if identical, so !strcmp is true if the two strings are the same
-    if ( !strcmp( recMes.getAddress(0) , "mbed" ) ) {
-        printf("OSC Message received addressed to mbed \r\n");
-        if ( !strcmp( recMes.getAddress(1) , "test1" ) )
-            printf("Received subAddress= test1 \r\n");
-
-        // Send some osc message:
-        sendMes.setTopAddress("/working...");
-        osc.sendOsc(&sendMes);
-    }
-}
-
-////  M A I N
-int main() {
-
-    //// TASK: Set up the Ethernet port
-    printf("Setting up ethernet...\r\n");
-    EthernetErr ethErr = eth.setup();
-    if (ethErr) {
-        printf("Ethernet Failed to setup. Error: %d\r\n", ethErr);
-        return -1;
-    }
-    printf("Ethernet OK\r\n");
-
-    //// TASK: Set up OSC message sending
-
-    // In the OSC message container we've made for send messages, set where we want it to go:
-    sendMes.setIp( destIp );
-    sendMes.setPort( destPort );
-
-    //// TASK: Set up OSC message receiving
-
-    // In the OSC send/receive object...
-    // Set the OSC message container for it to parse received messages into
-    osc.setReceiveMessage(&recMes);
-
-    // Tell it to begin listening for OSC messages at the port specified (the IP address we know already, it's the mbed's!).
-    osc.begin(mbedListenPort);
-
-    // Rather than constantly checking to see whether there are new messages waiting, the object can call some code of ours to run when a message is received.
-    // This line does that, attaching a callback function we've written before getting to this point, in this case it's called processOSC
-    // For more info how this works, see http://mbed.org/cookbook/FunctionPointer
-    osc.messageReceivedCallback.attach(&processOSC);
-
-    //// TASK: Prime button change detection
-    buttonLastState = button;
-
-    //// TASK: GO!
-
-    // We've finished setting up, now loop this forever...
-    while (true) {
-        // This polls the network connection for new activity, without keeping on calling this you won't receive any OSC!
-        Net::poll();
-
-        // Has the button changed?
-        if (button != buttonLastState) {
-            // If so, lets update the lastState variable and then send an OSC message
-            buttonLastState = button;
-            
-            sendMes.setTopAddress("/mbed");
-            sendMes.setSubAddress("/button");
-            sendMes.setArgs("i", (long)button); // The payload will be the button state as an integer, ie. 0 or 1. We need to cast to 'long' for ints (and 'double' for floats).// The payload will be the button state as an integer, ie. 0 or 1. We need to cast to 'long' for ints (and 'double' for floats).
-            osc.sendOsc(&sendMes);
-            
-            printf("Sent OSC message /mbed/button \r\n");
-        }
-
-        // ... Do whatever needs to be done by your mbed otherwise. If an OSC message is received, your messageReceivedCallback will run (in this case, processOSC()).
-    }
-}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Oct 04 12:19:39 2013 +0000
@@ -0,0 +1,126 @@
+#include "mbed.h"
+#include "mbedOSC.h"
+
+//// ETHERNET
+
+// Ethernet can be created with *either* an address assigned by DHCP or a static IP address. Uncomment the define line for DHCP
+//#define DHCP
+#ifdef DHCP
+EthernetNetIf eth;
+#else
+EthernetNetIf eth(
+    IpAddr(10,0,0,2), //IP Address
+    IpAddr(255,255,255,0), //Network Mask
+    IpAddr(10,0,0,1), //Gateway
+    IpAddr(10,0,0,1)  //DNS
+);
+#endif
+
+//// OSC
+
+// The object to do the work of sending and receiving
+OSCClass osc;
+
+// The message objects to send and receive with
+OSCMessage recMes;
+OSCMessage sendMes;
+
+// Setting - The port we're listening to on the mbed for OSC messages
+int  mbedListenPort  = 10000;
+
+// Setting - The address and port we're going to send to, from the mbed
+uint8_t destIp[]  = { 10, 0, 0, 5};
+int  destPort = 12000;
+
+//// mbed input
+
+DigitalIn button(p21);
+bool buttonLastState;
+
+//// Our messageReceivedCallback function
+void processOSC() {
+
+    // If this function has been called, the OSC message just received will have been parsed into our recMes OSCMessage object
+    // Note we can access recMes here, outside of the main loop, as we created it as a global variable.
+
+    // TASK: If this message one we want, do something about it.
+    // In this example we're listening for messages with a top address of "mbed".
+    // Note the strcmp function returns 0 if identical, so !strcmp is true if the two strings are the same
+    if ( !strcmp( recMes.getAddress(0) , "mbed" ) ) {
+        printf("OSC Message received addressed to mbed \r\n");
+        if ( !strcmp( recMes.getAddress(1) , "test1" ) )
+            printf("Received subAddress= test1 \r\n");
+            
+            int na = recMes.getArgNum();
+            printf("numArgs: %d \r\n", na);
+            
+            for (int i = 0; i < na; i++) {
+                int v = recMes.getArgInt(i);
+                printf("%d, \r\n", v);
+            }
+                               
+        // Send some osc message:
+        sendMes.setTopAddress("/working...");
+//        sendMes.setArgs("i", &v1);
+        osc.sendOsc(&sendMes);
+    }
+}
+
+////  M A I N
+int main() {
+
+    //// TASK: Set up the Ethernet port
+    printf("Setting up ethernet...\r\n");
+    EthernetErr ethErr = eth.setup();
+    if (ethErr) {
+        printf("Ethernet Failed to setup. Error: %d\r\n", ethErr);
+        return -1;
+    }
+    printf("Ethernet OK\r\n");
+
+    //// TASK: Set up OSC message sending
+
+    // In the OSC message container we've made for send messages, set where we want it to go:
+    sendMes.setIp( destIp );
+    sendMes.setPort( destPort );
+
+    //// TASK: Set up OSC message receiving
+
+    // In the OSC send/receive object...
+    // Set the OSC message container for it to parse received messages into
+    osc.setReceiveMessage(&recMes);
+
+    // Tell it to begin listening for OSC messages at the port specified (the IP address we know already, it's the mbed's!).
+    osc.begin(mbedListenPort);
+
+    // Rather than constantly checking to see whether there are new messages waiting, the object can call some code of ours to run when a message is received.
+    // This line does that, attaching a callback function we've written before getting to this point, in this case it's called processOSC
+    // For more info how this works, see http://mbed.org/cookbook/FunctionPointer
+    osc.messageReceivedCallback.attach(&processOSC);
+
+    //// TASK: Prime button change detection
+    buttonLastState = button;
+
+    //// TASK: GO!
+
+    // We've finished setting up, now loop this forever...
+    while (true) {
+        // This polls the network connection for new activity, without keeping on calling this you won't receive any OSC!
+        Net::poll();
+
+        // Has the button changed?
+        if (button != buttonLastState) {
+            // If so, lets update the lastState variable and then send an OSC message
+            buttonLastState = button;
+            
+            sendMes.setTopAddress("/mbed");
+            sendMes.setSubAddress("/button");
+            sendMes.setArgs("i", (long)button); // The payload will be the button state as an integer, ie. 0 or 1. We need to cast to 'long' for ints (and 'double' for floats).// The payload will be the button state as an integer, ie. 0 or 1. We need to cast to 'long' for ints (and 'double' for floats).
+            osc.sendOsc(&sendMes);
+            
+            printf("Sent OSC message /mbed/button \r\n");
+        }
+
+        // ... Do whatever needs to be done by your mbed otherwise. If an OSC message is received, your messageReceivedCallback will run (in this case, processOSC()).
+    }
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Oct 04 12:19:39 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.lib	Fri Oct 04 12:19:39 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/itotaka/code/mbed/#b749145a7bb1

--- a/mbedOSC.h	Fri Jul 26 22:10:20 2013 +0000
+++ b/mbedOSC.h	Fri Oct 04 12:19:39 2013 +0000
@@ -27,7 +27,7 @@
 
 
 #define MAX_ADDRESS    2
-#define MAX_ARG        2
+#define MAX_ARG        80
 
 #define TYPE_INT    1
 #define TYPE_FLOAT    2