Igor Skochinsky
NXP's driver library for LPC17xx, ported to mbed's online compiler. Not tested! I had to fix a lot of warings and found a couple of pretty obvious bugs, so the chances are there are more. Original: http://ics.nxp.com/support/documents/microcontrollers/zip/lpc17xx.cmsis.driver.library.zip
Embed:
(wiki syntax)
Show/hide line numbers
lpc17xx_clkpwr.c
Go to the documentation of this file.
00001 /** 00002 * @file : lpc17xx_clkpwr.c 00003 * @brief : Contains all functions support for Clock and Power Control 00004 * firmware library on LPC17xx 00005 * @version : 1.0 00006 * @date : 18. Mar. 2009 00007 * @author : HieuNguyen 00008 ************************************************************************** 00009 * Software that is described herein is for illustrative purposes only 00010 * which provides customers with programming information regarding the 00011 * products. This software is supplied "AS IS" without any warranties. 00012 * NXP Semiconductors assumes no responsibility or liability for the 00013 * use of the software, conveys no license or title under any patent, 00014 * copyright, or mask work right to the product. NXP Semiconductors 00015 * reserves the right to make changes in the software without 00016 * notification. NXP Semiconductors also make no representation or 00017 * warranty that such application will be suitable for the specified 00018 * use without further testing or modification. 00019 **********************************************************************/ 00020 00021 /* Peripheral group ----------------------------------------------------------- */ 00022 /** @addtogroup CLKPWR 00023 * @{ 00024 */ 00025 00026 /* Includes ------------------------------------------------------------------- */ 00027 #include "lpc17xx_clkpwr.h" 00028 00029 00030 /* Public Functions ----------------------------------------------------------- */ 00031 /** @addtogroup CLKPWR_Public_Functions 00032 * @{ 00033 */ 00034 00035 /*********************************************************************//** 00036 * @brief Set value of each Peripheral Clock Selection 00037 * @param[in] ClkType Peripheral Clock Selection of each type, 00038 * should be one of the following: 00039 * - CLKPWR_PCLKSEL_WDT : WDT 00040 - CLKPWR_PCLKSEL_TIMER0 : Timer 0 00041 - CLKPWR_PCLKSEL_TIMER1 : Timer 1 00042 - CLKPWR_PCLKSEL_UART0 : UART 0 00043 - CLKPWR_PCLKSEL_UART1 : UART 1 00044 - CLKPWR_PCLKSEL_PWM1 : PWM 1 00045 - CLKPWR_PCLKSEL_I2C0 : I2C 0 00046 - CLKPWR_PCLKSEL_SPI : SPI 00047 - CLKPWR_PCLKSEL_SSP1 : SSP 1 00048 - CLKPWR_PCLKSEL_DAC : DAC 00049 - CLKPWR_PCLKSEL_ADC : ADC 00050 - CLKPWR_PCLKSEL_CAN1 : CAN 1 00051 - CLKPWR_PCLKSEL_CAN2 : CAN 2 00052 - CLKPWR_PCLKSEL_ACF : ACF 00053 - CLKPWR_PCLKSEL_QEI : QEI 00054 - CLKPWR_PCLKSEL_PCB : PCB 00055 - CLKPWR_PCLKSEL_I2C1 : I2C 1 00056 - CLKPWR_PCLKSEL_SSP0 : SSP 0 00057 - CLKPWR_PCLKSEL_TIMER2 : Timer 2 00058 - CLKPWR_PCLKSEL_TIMER3 : Timer 3 00059 - CLKPWR_PCLKSEL_UART2 : UART 2 00060 - CLKPWR_PCLKSEL_UART3 : UART 3 00061 - CLKPWR_PCLKSEL_I2C2 : I2C 2 00062 - CLKPWR_PCLKSEL_I2S : I2S 00063 - CLKPWR_PCLKSEL_RIT : RIT 00064 - CLKPWR_PCLKSEL_SYSCON : SYSCON 00065 - CLKPWR_PCLKSEL_MC : MC 00066 00067 * @param[in] DivVal Value of divider, should be: 00068 * - CLKPWR_PCLKSEL_CCLK_DIV_4 : PCLK_peripheral = CCLK/4 00069 * - CLKPWR_PCLKSEL_CCLK_DIV_1 : PCLK_peripheral = CCLK/1 00070 * - CLKPWR_PCLKSEL_CCLK_DIV_2 : PCLK_peripheral = CCLK/2 00071 * 00072 * @return none 00073 **********************************************************************/ 00074 void CLKPWR_SetPCLKDiv (uint32_t ClkType, uint32_t DivVal) 00075 { 00076 uint32_t bitpos; 00077 00078 bitpos = (ClkType < 32) ? (ClkType) : (ClkType - 32); 00079 00080 /* PCLKSEL0 selected */ 00081 if (ClkType < 32) 00082 { 00083 /* Clear two bit at bit position */ 00084 LPC_SC->PCLKSEL0 &= (~(CLKPWR_PCLKSEL_BITMASK(bitpos))); 00085 00086 /* Set two selected bit */ 00087 LPC_SC->PCLKSEL0 |= (CLKPWR_PCLKSEL_SET(bitpos, DivVal)); 00088 } 00089 /* PCLKSEL1 selected */ 00090 else 00091 { 00092 /* Clear two bit at bit position */ 00093 LPC_SC->PCLKSEL1 &= ~(CLKPWR_PCLKSEL_BITMASK(bitpos)); 00094 00095 /* Set two selected bit */ 00096 LPC_SC->PCLKSEL1 |= (CLKPWR_PCLKSEL_SET(bitpos, DivVal)); 00097 } 00098 } 00099 00100 00101 /*********************************************************************//** 00102 * @brief Get current value of each Peripheral Clock Selection 00103 * @param[in] ClkType Peripheral Clock Selection of each type, 00104 * should be one of the following: 00105 * - CLKPWR_PCLKSEL_WDT : WDT 00106 - CLKPWR_PCLKSEL_TIMER0 : Timer 0 00107 - CLKPWR_PCLKSEL_TIMER1 : Timer 1 00108 - CLKPWR_PCLKSEL_UART0 : UART 0 00109 - CLKPWR_PCLKSEL_UART1 : UART 1 00110 - CLKPWR_PCLKSEL_PWM1 : PWM 1 00111 - CLKPWR_PCLKSEL_I2C0 : I2C 0 00112 - CLKPWR_PCLKSEL_SPI : SPI 00113 - CLKPWR_PCLKSEL_SSP1 : SSP 1 00114 - CLKPWR_PCLKSEL_DAC : DAC 00115 - CLKPWR_PCLKSEL_ADC : ADC 00116 - CLKPWR_PCLKSEL_CAN1 : CAN 1 00117 - CLKPWR_PCLKSEL_CAN2 : CAN 2 00118 - CLKPWR_PCLKSEL_ACF : ACF 00119 - CLKPWR_PCLKSEL_QEI : QEI 00120 - CLKPWR_PCLKSEL_PCB : PCB 00121 - CLKPWR_PCLKSEL_I2C1 : I2C 1 00122 - CLKPWR_PCLKSEL_SSP0 : SSP 0 00123 - CLKPWR_PCLKSEL_TIMER2 : Timer 2 00124 - CLKPWR_PCLKSEL_TIMER3 : Timer 3 00125 - CLKPWR_PCLKSEL_UART2 : UART 2 00126 - CLKPWR_PCLKSEL_UART3 : UART 3 00127 - CLKPWR_PCLKSEL_I2C2 : I2C 2 00128 - CLKPWR_PCLKSEL_I2S : I2S 00129 - CLKPWR_PCLKSEL_RIT : RIT 00130 - CLKPWR_PCLKSEL_SYSCON : SYSCON 00131 - CLKPWR_PCLKSEL_MC : MC 00132 00133 * @return Value of Selected Peripheral Clock Selection 00134 **********************************************************************/ 00135 uint32_t CLKPWR_GetPCLKSEL (uint32_t ClkType) 00136 { 00137 uint32_t bitpos, retval; 00138 00139 if (ClkType < 32) 00140 { 00141 bitpos = ClkType; 00142 retval = LPC_SC->PCLKSEL0; 00143 } 00144 else 00145 { 00146 bitpos = ClkType - 32; 00147 retval = LPC_SC->PCLKSEL1; 00148 } 00149 00150 retval = CLKPWR_PCLKSEL_GET(bitpos, retval); 00151 return retval; 00152 } 00153 00154 00155 00156 /*********************************************************************//** 00157 * @brief Get current value of each Peripheral Clock 00158 * @param[in] ClkType Peripheral Clock Selection of each type, 00159 * should be one of the following: 00160 * - CLKPWR_PCLKSEL_WDT : WDT 00161 - CLKPWR_PCLKSEL_TIMER0 : Timer 0 00162 - CLKPWR_PCLKSEL_TIMER1 : Timer 1 00163 - CLKPWR_PCLKSEL_UART0 : UART 0 00164 - CLKPWR_PCLKSEL_UART1 : UART 1 00165 - CLKPWR_PCLKSEL_PWM1 : PWM 1 00166 - CLKPWR_PCLKSEL_I2C0 : I2C 0 00167 - CLKPWR_PCLKSEL_SPI : SPI 00168 - CLKPWR_PCLKSEL_SSP1 : SSP 1 00169 - CLKPWR_PCLKSEL_DAC : DAC 00170 - CLKPWR_PCLKSEL_ADC : ADC 00171 - CLKPWR_PCLKSEL_CAN1 : CAN 1 00172 - CLKPWR_PCLKSEL_CAN2 : CAN 2 00173 - CLKPWR_PCLKSEL_ACF : ACF 00174 - CLKPWR_PCLKSEL_QEI : QEI 00175 - CLKPWR_PCLKSEL_PCB : PCB 00176 - CLKPWR_PCLKSEL_I2C1 : I2C 1 00177 - CLKPWR_PCLKSEL_SSP0 : SSP 0 00178 - CLKPWR_PCLKSEL_TIMER2 : Timer 2 00179 - CLKPWR_PCLKSEL_TIMER3 : Timer 3 00180 - CLKPWR_PCLKSEL_UART2 : UART 2 00181 - CLKPWR_PCLKSEL_UART3 : UART 3 00182 - CLKPWR_PCLKSEL_I2C2 : I2C 2 00183 - CLKPWR_PCLKSEL_I2S : I2S 00184 - CLKPWR_PCLKSEL_RIT : RIT 00185 - CLKPWR_PCLKSEL_SYSCON : SYSCON 00186 - CLKPWR_PCLKSEL_MC : MC 00187 00188 * @return Value of Selected Peripheral Clock 00189 **********************************************************************/ 00190 uint32_t CLKPWR_GetPCLK (uint32_t ClkType) 00191 { 00192 uint32_t retval, div; 00193 00194 retval = SystemCoreClock; 00195 div = CLKPWR_GetPCLKSEL(ClkType); 00196 00197 switch (div) 00198 { 00199 case 0: 00200 div = 4; 00201 break; 00202 00203 case 1: 00204 div = 1; 00205 break; 00206 00207 case 2: 00208 div = 2; 00209 break; 00210 00211 case 3: 00212 div = 8; 00213 break; 00214 } 00215 retval /= div; 00216 00217 return retval; 00218 } 00219 00220 00221 00222 /*********************************************************************//** 00223 * @brief Configure power supply for each peripheral according to NewState 00224 * @param[in] PPType Type of peripheral used to enable power, 00225 * should be one of the following: 00226 * - CLKPWR_PCONP_PCTIM0 : Timer 0 00227 - CLKPWR_PCONP_PCTIM1 : Timer 1 00228 - CLKPWR_PCONP_PCUART0 : UART 0 00229 - CLKPWR_PCONP_PCUART1 : UART 1 00230 - CLKPWR_PCONP_PCPWM1 : PWM 1 00231 - CLKPWR_PCONP_PCI2C0 : I2C 0 00232 - CLKPWR_PCONP_PCSPI : SPI 00233 - CLKPWR_PCONP_PCRTC : RTC 00234 - CLKPWR_PCONP_PCSSP1 : SSP 1 00235 - CLKPWR_PCONP_PCAD : ADC 00236 - CLKPWR_PCONP_PCAN1 : CAN 1 00237 - CLKPWR_PCONP_PCAN2 : CAN 2 00238 - CLKPWR_PCONP_PCGPIO : GPIO 00239 - CLKPWR_PCONP_PCRIT : RIT 00240 - CLKPWR_PCONP_PCMC : MC 00241 - CLKPWR_PCONP_PCQEI : QEI 00242 - CLKPWR_PCONP_PCI2C1 : I2C 1 00243 - CLKPWR_PCONP_PCSSP0 : SSP 0 00244 - CLKPWR_PCONP_PCTIM2 : Timer 2 00245 - CLKPWR_PCONP_PCTIM3 : Timer 3 00246 - CLKPWR_PCONP_PCUART2 : UART 2 00247 - CLKPWR_PCONP_PCUART3 : UART 3 00248 - CLKPWR_PCONP_PCI2C2 : I2C 2 00249 - CLKPWR_PCONP_PCI2S : I2S 00250 - CLKPWR_PCONP_PCGPDMA : GPDMA 00251 - CLKPWR_PCONP_PCENET : Ethernet 00252 - CLKPWR_PCONP_PCUSB : USB 00253 * 00254 * @param[in] NewState New state of Peripheral Power, should be: 00255 * - ENABLE : Enable power for this peripheral 00256 * - DISABLE : Disable power for this peripheral 00257 * 00258 * @return none 00259 **********************************************************************/ 00260 void CLKPWR_ConfigPPWR (uint32_t PPType, FunctionalState NewState) 00261 { 00262 if (NewState == ENABLE) 00263 { 00264 LPC_SC->PCONP |= PPType & CLKPWR_PCONP_BITMASK; 00265 } 00266 else if (NewState == DISABLE) 00267 { 00268 LPC_SC->PCONP &= (~PPType) & CLKPWR_PCONP_BITMASK; 00269 } 00270 } 00271 00272 00273 /** 00274 * @brief Enter Sleep mode with co-operated instruction by the Cortex-M3. 00275 * @param[in] None 00276 * @return None 00277 */ 00278 void CLKPWR_Sleep(void) 00279 { 00280 LPC_SC->PCON = 0x00; 00281 /* Sleep Mode*/ 00282 __WFI(); 00283 } 00284 00285 00286 /** 00287 * @brief Enter Deep Sleep mode with co-operated instruction by the Cortex-M3. 00288 * @param[in] None 00289 * @return None 00290 */ 00291 void CLKPWR_DeepSleep(void) 00292 { 00293 /* Deep-Sleep Mode, set SLEEPDEEP bit */ 00294 SCB->SCR = 0x4; 00295 LPC_SC->PCON = 0x00; 00296 /* Sleep Mode*/ 00297 __WFI(); 00298 } 00299 00300 00301 /** 00302 * @brief Enter Power Down mode with co-operated instruction by the Cortex-M3. 00303 * @param[in] None 00304 * @return None 00305 */ 00306 void CLKPWR_PowerDown(void) 00307 { 00308 /* Deep-Sleep Mode, set SLEEPDEEP bit */ 00309 SCB->SCR = 0x4; 00310 LPC_SC->PCON = 0x01; 00311 /* Sleep Mode*/ 00312 __WFI(); 00313 } 00314 00315 00316 /** 00317 * @brief Enter Deep Power Down mode with co-operated instruction by the Cortex-M3. 00318 * @param[in] None 00319 * @return None 00320 */ 00321 void CLKPWR_DeepPowerDown(void) 00322 { 00323 /* Deep-Sleep Mode, set SLEEPDEEP bit */ 00324 SCB->SCR = 0x4; 00325 LPC_SC->PCON = 0x03; 00326 /* Sleep Mode*/ 00327 __WFI(); 00328 } 00329 00330 00331 /** 00332 * @brief Configure Brown-Out function in 00333 */ 00334 00335 00336 /** 00337 * @} 00338 */ 00339 00340 /** 00341 * @} 00342 */ 00343 00344 /* --------------------------------- End Of File ------------------------------ */
Generated on Tue Jul 12 2022 17:06:02 by
1.7.2