Revision 1:a011ae93a350, committed 2014-04-02

Comitter:

sophtware

Date:

Wed Apr 02 11:12:00 2014 +0000

Parent:

0:beb43bc3d6d4

Child:

2:2ebc9c0d4a54

Commit message:

Some spelling updates.

Changed in this revision

--- a/MPL3115A2.h	Tue Apr 01 21:35:23 2014 +0000
+++ b/MPL3115A2.h	Wed Apr 02 11:12:00 2014 +0000
@@ -19,7 +19,7 @@
     
     Be sure to download the DATASHEET and the App Note AN4519.
     
-    This libraray was created using the mbed NXP LPC11U24. Pins
+    This library was created using the mbed NXP LPC11U24. Pins
     p27 and p28 were used for the I2C functions. Be sure to install
     1K pull-up resistors on both lines. Also, if you're not using
     the SparkFun breakout board, be sure to use the right caps on 
@@ -29,7 +29,7 @@
     the Arduino written by Nathan Seidle at SparkFun. I copied
     some of the number crunching routines and tried to follow his
     style of coding for the library. That way users of Arduinos
-    cound step into this library a little easier.
+    could step into this library a little easier.
  
  */
  
@@ -131,10 +131,10 @@
     void  setModeActive();  // Activates the sensor to start taking measurements.
     
     // When calling any of these methods, be sure to put the sensor in standby mode first.
-    void  setModeBarometer();       // Puts the sensor into barometric mode
-    void  setModeAltimeter();       // Puts the sensor into altimeter mode
-    void  setOversampleRate(char);  // Sets the number of samples from 1 to 128.
-    void  enableEventFlags();       // Sets the all event flags.
+    void  setModeBarometer();           // Puts the sensor into barometric mode
+    void  setModeAltimeter();           // Puts the sensor into altimeter mode
+    void  setOversampleRate(char rate); // Sets the number of samples from 1 to 128.
+    void  enableEventFlags();           // Sets all the event flags.
 
 private:
     I2C *_i2c;          // The I2C object we use to communicate with the sensor. It is not part