Vizic Technologies
SMARTGPU Simple Paint application with touch!
Revision 0:ecef9acc53d7, committed 2011-09-14
- Comitter:
- emmanuelchio
- Date:
- Wed Sep 14 05:33:57 2011 +0000
- Commit message:
- Rev 1.0
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SMARTGPU.lib Wed Sep 14 05:33:57 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/emmanuelchio/code/SMARTGPU/#8da93960a86b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Wed Sep 14 05:33:57 2011 +0000
@@ -0,0 +1,47 @@
+/**************************************************************************************/
+/*SMARTGPU intelligent embedded graphics processor unit
+ those examples are for use the SMARTGPU with the mbed microcontoller, just connect tx,rx,and reset
+ Board:
+ http://www.vizictechnologies.com/#/desarrollo/4554296549
+
+ www.vizictechnologies.com
+ Vizic Technologies copyright 2011 */
+/**************************************************************************************/
+/**************************************************************************************/
+
+#include "mbed.h"
+#include "SMARTGPU.h"
+
+#define PENSIZE 5 //size of the drawing pen
+
+SMARTGPU lcd(p13,p14,p15); //(TX,RX,Reset);
+
+//Each time we use the touchscreen we must define a int array that stores the X and Y readed or touched coordinates.
+int touch[2];
+//Each time we use the touchicon we must define a char array that stores the name of the touched icon.
+char icon[3];
+
+int main() {
+ lcd.reset(); //physically reset SMARTGPU
+ lcd.start(); //initialize the SMARTGPU processor
+
+ lcd.baudChange(2000000); // Set a fast baud!, always that we use touch functions is recommended to use fast baud rates
+
+ //front cover
+ lcd.string(85,50,290,220,YELLOW,FONT7,TRANS,"Mini Paint");
+ lcd.string(45,95,290,220,BLUE,FONT5,TRANS,"Touch any icon to erase screen");
+ lcd.string(30,160,310,220,MAGENTA,FONT4,TRANS,"Touch screen to begin");
+
+ while(!lcd.touchScreen(touch)); // Wait for a touch on the screen to start
+ lcd.erase();
+ wait_ms(500);
+
+ while(1){ // Loop forever
+ if(lcd.touchScreen(touch)){ // If we receive a touch on the screen
+ lcd.drawCircle(touch[XCOORD],touch[YCOORD],PENSIZE,GREEN,FILL); // Draw circle on touched coordinates
+ }
+ if(lcd.touchIcon(icon)){ // If we receive a touch on any icon
+ lcd.erase(); // Erase screen
+ }
+ }
+}
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Wed Sep 14 05:33:57 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/63bcd7ba4912