Vizic Technologies
SMARTGPU bounce ball demo
Revision 0:d36fc6fb6704, committed 2011-09-14
- Comitter:
- emmanuelchio
- Date:
- Wed Sep 14 05:31:16 2011 +0000
- Commit message:
- Rev 1.0
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SMARTGPU.lib Wed Sep 14 05:31:16 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/emmanuelchio/code/SMARTGPU/#8da93960a86b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Wed Sep 14 05:31:16 2011 +0000
@@ -0,0 +1,54 @@
+/**************************************************************************************/
+/*SMARTGPU intelligent embedded graphics processor unit
+ those examples are for use the SMARTGPU with the mbed microcontoller, just connect tx,rx,and reset
+ Board:
+ http://www.vizictechnologies.com/#/desarrollo/4554296549
+
+ www.vizictechnologies.com
+ Vizic Technologies copyright 2011 */
+/**************************************************************************************/
+/**************************************************************************************/
+
+#include "mbed.h"
+#include "SMARTGPU.h"
+
+SMARTGPU lcd(p13,p14,p15); //(TX,RX,Reset);
+
+// defines for balls
+#define radiusBall1 10 //ball1 size
+#define colourBall1 BLUE //ball1 colour
+
+//variables used by move ball method
+int speedBall1=3; //ball1 moving speed - amount of pixels that ball move each time
+int dirx1=1; //xball1 initial positive direction
+int diry1=-1; //yball1 initial negative direction
+int xBall1=300; //x initial position of ball1
+int yBall1=100; //y initial position of ball1
+
+/***************************************************/
+//Function that updates the current position of the ball1
+void moveBall1(){
+ lcd.drawCircle(xBall1,yBall1,radiusBall1,BLACK,FILL); // Erase previous ball position
+ xBall1+=(dirx1*speedBall1); // Calculate new x coordinate for ball1
+ yBall1+=(diry1*speedBall1); // Calculate new y coordinate for ball1
+ lcd.drawCircle(xBall1,yBall1,radiusBall1,colourBall1,FILL); // Draw new ball position
+ if((xBall1+speedBall1+radiusBall1)>318 | (xBall1-speedBall1-radiusBall1)<=1){ // if ball reaches the left or right corner, we invert moving direction
+ dirx1= dirx1*(-1); // Invert the moving direction by multiplying by -1
+ }
+ if((yBall1+speedBall1+radiusBall1)>238 | (yBall1-speedBall1-radiusBall1)<=1){ // if ball reaches the top or bottom corner, we invert moving direction
+ diry1= diry1*(-1); // Invert the moving direction by multiplying by -1
+ }
+}
+
+int main() {
+ lcd.reset(); //physically reset SMARTGPU
+ lcd.start(); //initialize the SMARTGPU processor
+
+ lcd.baudChange(1000000); //set a fast baud! for fast drawing
+ lcd.drawRectangle(0,0,319,239,YELLOW,UNFILL); //draw corners
+
+ while(1){ // Loop forever
+ moveBall1(); // move ball1
+ wait_ms(15); // wait a little
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Wed Sep 14 05:31:16 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/63bcd7ba4912