Defines |
| #define | SYS_LIGHTWEIGHT_PROT 0 |
| | SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain critical regions during buffer allocation, deallocation and memory allocation and deallocation.
|
| #define | NO_SYS 0 |
| | NO_SYS==1: Provides VERY minimal functionality.
|
| #define | NO_SYS_NO_TIMERS 0 |
| | NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1 Mainly for compatibility to old versions.
|
| #define | MEMCPY(dst, src, len) memcpy(dst,src,len) |
| | MEMCPY: override this if you have a faster implementation at hand than the one included in your C library.
|
| #define | SMEMCPY(dst, src, len) memcpy(dst,src,len) |
| | SMEMCPY: override this with care! Some compilers (e.g.
|
| #define | MEM_LIBC_MALLOC 0 |
| | MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library instead of the lwip internal allocator.
|
| #define | MEMP_MEM_MALLOC 0 |
| | MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
|
| #define | MEM_ALIGNMENT 1 |
| | MEM_ALIGNMENT: should be set to the alignment of the CPU 4 byte alignment -> define MEM_ALIGNMENT 4 2 byte alignment -> define MEM_ALIGNMENT 2.
|
| #define | MEM_SIZE 1600 |
| | MEM_SIZE: the size of the heap memory.
|
| #define | MEMP_SEPARATE_POOLS 0 |
| | MEMP_SEPARATE_POOLS: if defined to 1, each pool is placed in its own array.
|
| #define | MEMP_OVERFLOW_CHECK 0 |
| | MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable amount of bytes before and after each memp element in every pool and fills it with a prominent default value.
|
| #define | MEMP_SANITY_CHECK 0 |
| | MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make sure that there are no cycles in the linked lists.
|
| #define | MEM_USE_POOLS 0 |
| | MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set of memory pools of various sizes.
|
| #define | MEM_USE_POOLS_TRY_BIGGER_POOL 0 |
| | MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more reliable.
|
| #define | MEMP_USE_CUSTOM_POOLS 0 |
| | MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h that defines additional pools beyond the "standard" ones required by lwIP.
|
| #define | LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 |
| | Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from interrupt context (or another context that doesn't allow waiting for a semaphore).
|
| #define | MEMP_NUM_PBUF 16 |
| | MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
|
| #define | MEMP_NUM_RAW_PCB 4 |
| | MEMP_NUM_RAW_PCB: Number of raw connection PCBs (requires the LWIP_RAW option)
|
| #define | MEMP_NUM_UDP_PCB 4 |
| | MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks.
|
| #define | MEMP_NUM_TCP_PCB 5 |
| | MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
|
| #define | MEMP_NUM_TCP_PCB_LISTEN 8 |
| | MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
|
| #define | MEMP_NUM_TCP_SEG 16 |
| | MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
|
| #define | MEMP_NUM_REASSDATA 5 |
| | MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for reassembly (whole packets, not fragments!)
|
| #define | MEMP_NUM_FRAG_PBUF 15 |
| | MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent (fragments, not whole packets!).
|
| #define | MEMP_NUM_ARP_QUEUE 30 |
| | MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing packets (pbufs) that are waiting for an ARP request (to resolve their destination address) to finish.
|
| #define | MEMP_NUM_IGMP_GROUP 8 |
| | MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces can be members et the same time (one per netif - allsystems group -, plus one per netif membership).
|
| #define | MEMP_NUM_SYS_TIMEOUT 3 |
| | MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
|
| #define | MEMP_NUM_NETBUF 2 |
| | MEMP_NUM_NETBUF: the number of struct netbufs.
|
| #define | MEMP_NUM_NETCONN 4 |
| | MEMP_NUM_NETCONN: the number of struct netconns.
|
| #define | MEMP_NUM_TCPIP_MSG_API 8 |
| | MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used for callback/timeout API communication.
|
| #define | MEMP_NUM_TCPIP_MSG_INPKT 8 |
| | MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used for incoming packets.
|
| #define | MEMP_NUM_SNMP_NODE 50 |
| | MEMP_NUM_SNMP_NODE: the number of leafs in the SNMP tree.
|
| #define | MEMP_NUM_SNMP_ROOTNODE 30 |
| | MEMP_NUM_SNMP_ROOTNODE: the number of branches in the SNMP tree.
|
| #define | MEMP_NUM_SNMP_VARBIND 2 |
| | MEMP_NUM_SNMP_VARBIND: the number of concurrent requests (does not have to be changed normally) - 2 of these are used per request (1 for input, 1 for output)
|
| #define | MEMP_NUM_SNMP_VALUE 3 |
| | MEMP_NUM_SNMP_VALUE: the number of OID or values concurrently used (does not have to be changed normally) - 3 of these are used per request (1 for the value read and 2 for OIDs - input and output)
|
| #define | MEMP_NUM_NETDB 1 |
| | MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls (before freeing the corresponding memory using lwip_freeaddrinfo()).
|
| #define | MEMP_NUM_LOCALHOSTLIST 1 |
| | MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1.
|
| #define | MEMP_NUM_PPPOE_INTERFACES 1 |
| | MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE interfaces (only used with PPPOE_SUPPORT==1)
|
| #define | PBUF_POOL_SIZE 16 |
| | PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
|
| #define | LWIP_ARP 1 |
| | LWIP_ARP==1: Enable ARP functionality.
|
| #define | ARP_TABLE_SIZE 10 |
| | ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
|
| #define | ARP_QUEUEING 1 |
| | ARP_QUEUEING==1: Outgoing packets are queued during hardware address resolution.
|
| #define | ETHARP_TRUST_IP_MAC 0 |
| | ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be updated with the source MAC and IP addresses supplied in the packet.
|
| #define | ETHARP_SUPPORT_VLAN 0 |
| | ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.
|
| #define | LWIP_ETHERNET (LWIP_ARP || PPPOE_SUPPORT) |
| | LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP might be disabled.
|
| #define | ETH_PAD_SIZE 0 |
| | ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure alignment of payload after that header.
|
| #define | ETHARP_SUPPORT_STATIC_ENTRIES 0 |
| | ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table entries (using etharp_add_static_entry/etharp_remove_static_entry).
|
| #define | IP_FORWARD 0 |
| | IP_FORWARD==1: Enables the ability to forward IP packets across network interfaces.
|
| #define | IP_OPTIONS_ALLOWED 1 |
| | IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
|
| #define | IP_REASSEMBLY 1 |
| | IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets.
|
| #define | IP_FRAG 1 |
| | IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU.
|
| #define | IP_REASS_MAXAGE 3 |
| | IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) a fragmented IP packet waits for all fragments to arrive.
|
| #define | IP_REASS_MAX_PBUFS 10 |
| | IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
|
| #define | IP_FRAG_USES_STATIC_BUF 0 |
| | IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP fragmentation.
|
| #define | IP_DEFAULT_TTL 255 |
| | IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer (requires IP_FRAG_USES_STATIC_BUF==1)
|
| #define | IP_SOF_BROADCAST 0 |
| | IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast filter per pcb on udp and raw send operations.
|
| #define | IP_SOF_BROADCAST_RECV 0 |
| | IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast filter on recv operations.
|
| #define | LWIP_ICMP 1 |
| | LWIP_ICMP==1: Enable ICMP module inside the IP stack.
|
| #define | ICMP_TTL (IP_DEFAULT_TTL) |
| | ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
|
| #define | LWIP_BROADCAST_PING 0 |
| | LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
|
| #define | LWIP_MULTICAST_PING 0 |
| | LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
|
| #define | LWIP_RAW 1 |
| | LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
|
| #define | RAW_TTL (IP_DEFAULT_TTL) |
| | LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
|
| #define | LWIP_DHCP 0 |
| | LWIP_DHCP==1: Enable DHCP module.
|
| #define | DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) |
| | DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
|
| #define | LWIP_AUTOIP 0 |
| | LWIP_AUTOIP==1: Enable AUTOIP module.
|
| #define | LWIP_DHCP_AUTOIP_COOP 0 |
| | LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on the same interface at the same time.
|
| #define | LWIP_DHCP_AUTOIP_COOP_TRIES 9 |
| | LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes that should be sent before falling back on AUTOIP.
|
| #define | LWIP_SNMP 0 |
| | LWIP_SNMP==1: Turn on SNMP module.
|
| #define | SNMP_CONCURRENT_REQUESTS 1 |
| | SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will allow.
|
| #define | SNMP_TRAP_DESTINATIONS 1 |
| | SNMP_TRAP_DESTINATIONS: Number of trap destinations.
|
| #define | SNMP_PRIVATE_MIB 0 |
| | SNMP_PRIVATE_MIB: When using a private MIB, you have to create a file 'private_mib.h' that contains a 'struct mib_array_node mib_private' which contains your MIB.
|
| #define | SNMP_SAFE_REQUESTS 1 |
| | Only allow SNMP write actions that are 'safe' (e.g.
|
| #define | SNMP_MAX_OCTET_STRING_LEN 127 |
| | The maximum length of strings used.
|
| #define | SNMP_MAX_TREE_DEPTH 15 |
| | The maximum depth of the SNMP tree.
|
| #define | SNMP_MAX_VALUE_SIZE LWIP_MAX((SNMP_MAX_OCTET_STRING_LEN)+1, sizeof(s32_t)*(SNMP_MAX_TREE_DEPTH)) |
| | The size of the MEMP_SNMP_VALUE elements, normally calculated from SNMP_MAX_OCTET_STRING_LEN and SNMP_MAX_TREE_DEPTH.
|
| #define | LWIP_IGMP 0 |
| | LWIP_IGMP==1: Turn on IGMP module.
|
| #define | LWIP_DNS 0 |
| | LWIP_DNS==1: Turn on DNS module.
|
| #define | DNS_TABLE_SIZE 4 |
| | DNS maximum number of entries to maintain locally.
|
| #define | DNS_MAX_NAME_LENGTH 256 |
| | DNS maximum host name length supported in the name table.
|
| #define | DNS_MAX_SERVERS 2 |
| | The maximum of DNS servers.
|
| #define | DNS_DOES_NAME_CHECK 1 |
| | DNS do a name checking between the query and the response.
|
| #define | DNS_MSG_SIZE 512 |
| | DNS message max.
|
| #define | DNS_LOCAL_HOSTLIST 0 |
| | DNS_LOCAL_HOSTLIST: Implements a local host-to-address list.
|
| #define | DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 |
| | If this is turned on, the local host-list can be dynamically changed at runtime.
|
| #define | LWIP_UDP 1 |
| | LWIP_UDP==1: Turn on UDP.
|
| #define | LWIP_UDPLITE 0 |
| | LWIP_UDPLITE==1: Turn on UDP-Lite.
|
| #define | UDP_TTL (IP_DEFAULT_TTL) |
| | UDP_TTL: Default Time-To-Live value.
|
| #define | LWIP_NETBUF_RECVINFO 0 |
| | LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
|
| #define | LWIP_TCP 1 |
| | LWIP_TCP==1: Turn on TCP.
|
| #define | TCP_TTL (IP_DEFAULT_TTL) |
| | TCP_TTL: Default Time-To-Live value.
|
| #define | TCP_WND (4 * TCP_MSS) |
| | TCP_WND: The size of a TCP window.
|
| #define | TCP_MAXRTX 12 |
| | TCP_MAXRTX: Maximum number of retransmissions of data segments.
|
| #define | TCP_SYNMAXRTX 6 |
| | TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
|
| #define | TCP_QUEUE_OOSEQ (LWIP_TCP) |
| | TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
|
| #define | TCP_MSS 536 |
| | TCP_MSS: TCP Maximum segment size.
|
| #define | TCP_CALCULATE_EFF_SEND_MSS 1 |
| | TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which reflects the available reassembly buffer size at the remote host) and the largest size permitted by the IP layer" (RFC 1122) Setting this to 1 enables code that checks TCP_MSS against the MTU of the netif used for a connection and limits the MSS if it would be too big otherwise.
|
| #define | TCP_SND_BUF 256 |
| | TCP_SND_BUF: TCP sender buffer space (bytes).
|
| #define | TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS)) |
| | TCP_SND_QUEUELEN: TCP sender buffer space (pbufs).
|
| #define | TCP_SNDLOWAT ((TCP_SND_BUF)/2) |
| | TCP_SNDLOWAT: TCP writable space (bytes).
|
| #define | TCP_SNDQUEUELOWAT ((TCP_SND_QUEUELEN)/2) |
| | TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count).
|
| #define | TCP_LISTEN_BACKLOG 0 |
| | TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
|
| #define | TCP_DEFAULT_LISTEN_BACKLOG 0xff |
| | The maximum allowed backlog for TCP listen netconns.
|
| #define | TCP_OVERSIZE TCP_MSS |
| | TCP_OVERSIZE: The maximum number of bytes that tcp_write may allocate ahead of time in an attempt to create shorter pbuf chains for transmission.
|
| #define | LWIP_TCP_TIMESTAMPS 0 |
| | LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
|
| #define | TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4) |
| | TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an explicit window update.
|
| #define | LWIP_EVENT_API 0 |
| | LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1.
|
| #define | PBUF_LINK_HLEN (14 + ETH_PAD_SIZE) |
| | PBUF_LINK_HLEN: the number of bytes that should be allocated for a link level header.
|
| #define | PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) |
| | PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool.
|
| #define | LWIP_NETIF_HOSTNAME 0 |
| | LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname field.
|
| #define | LWIP_NETIF_API 0 |
| | LWIP_NETIF_API==1: Support netif api (in netifapi.c)
|
| #define | LWIP_NETIF_STATUS_CALLBACK 0 |
| | LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface changes its up/down status (i.e., due to DHCP IP acquistion)
|
| #define | LWIP_NETIF_LINK_CALLBACK 0 |
| | LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface whenever the link changes (i.e., link down)
|
| #define | LWIP_NETIF_HWADDRHINT 0 |
| | LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g.
|
| #define | LWIP_NETIF_LOOPBACK 0 |
| | LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP address equal to the netif IP address, looping them back up the stack.
|
| #define | LWIP_LOOPBACK_MAX_PBUFS 0 |
| | LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback sending for each netif (0 = disabled)
|
| #define | LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) |
| | LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in the system, as netifs must change how they behave depending on this setting for the LWIP_NETIF_LOOPBACK option to work.
|
| #define | LWIP_NETIF_TX_SINGLE_PBUF 0 |
| | LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data to be sent into one single pbuf.
|
| #define | LWIP_HAVE_LOOPIF 0 |
| | LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c.
|
| #define | LWIP_HAVE_SLIPIF 0 |
| | LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c.
|
| #define | TCPIP_THREAD_NAME "tcpip_thread" |
| | TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
|
| #define | TCPIP_THREAD_STACKSIZE 0 |
| | TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
|
| #define | TCPIP_THREAD_PRIO 1 |
| | TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
|
| #define | TCPIP_MBOX_SIZE 0 |
| | TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages The queue size value itself is platform-dependent, but is passed to sys_mbox_new() when tcpip_init is called.
|
| #define | SLIPIF_THREAD_NAME "slipif_loop" |
| | SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
|
| #define | SLIPIF_THREAD_STACKSIZE 0 |
| | SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
|
| #define | SLIPIF_THREAD_PRIO 1 |
| | SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
|
| #define | PPP_THREAD_NAME "pppInputThread" |
| | PPP_THREAD_NAME: The name assigned to the pppInputThread.
|
| #define | PPP_THREAD_STACKSIZE 0 |
| | PPP_THREAD_STACKSIZE: The stack size used by the pppInputThread.
|
| #define | PPP_THREAD_PRIO 1 |
| | PPP_THREAD_PRIO: The priority assigned to the pppInputThread.
|
| #define | DEFAULT_THREAD_NAME "lwIP" |
| | DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
|
| #define | DEFAULT_THREAD_STACKSIZE 0 |
| | DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
|
| #define | DEFAULT_THREAD_PRIO 1 |
| | DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
|
| #define | DEFAULT_RAW_RECVMBOX_SIZE 0 |
| | DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a NETCONN_RAW.
|
| #define | DEFAULT_UDP_RECVMBOX_SIZE 0 |
| | DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a NETCONN_UDP.
|
| #define | DEFAULT_TCP_RECVMBOX_SIZE 0 |
| | DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a NETCONN_TCP.
|
| #define | DEFAULT_ACCEPTMBOX_SIZE 0 |
| | DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
|
| #define | LWIP_TCPIP_CORE_LOCKING 0 |
| | LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) Don't use it if you're not an active lwIP project member.
|
| #define | LWIP_TCPIP_CORE_LOCKING_INPUT 0 |
| | LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!) Don't use it if you're not an active lwIP project member.
|
| #define | LWIP_NETCONN 1 |
| | LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
|
| #define | LWIP_TCPIP_TIMEOUT 1 |
| | LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout tod create timers running in tcpip_thread from another thread.
|
| #define | LWIP_SOCKET 1 |
| | LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
|
| #define | LWIP_COMPAT_SOCKETS 1 |
| | LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names.
|
| #define | LWIP_POSIX_SOCKETS_IO_NAMES 1 |
| | LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
|
| #define | LWIP_TCP_KEEPALIVE 0 |
| | LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT options processing.
|
| #define | LWIP_SO_RCVTIMEO 0 |
| | LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing.
|
| #define | LWIP_SO_RCVBUF 0 |
| | LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
|
| #define | RECV_BUFSIZE_DEFAULT INT_MAX |
| | If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
|
| #define | SO_REUSE 0 |
| | SO_REUSE==1: Enable SO_REUSEADDR option.
|
| #define | SO_REUSE_RXTOALL 0 |
| | SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets to all local matches if SO_REUSEADDR is turned on.
|
| #define | LWIP_STATS 1 |
| | LWIP_STATS==1: Enable statistics collection in lwip_stats.
|
| #define | LWIP_STATS_DISPLAY 0 |
| | LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
|
| #define | LINK_STATS 1 |
| | LINK_STATS==1: Enable link stats.
|
| #define | ETHARP_STATS (LWIP_ARP) |
| | ETHARP_STATS==1: Enable etharp stats.
|
| #define | IP_STATS 1 |
| | IP_STATS==1: Enable IP stats.
|
| #define | IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) |
| | IPFRAG_STATS==1: Enable IP fragmentation stats.
|
| #define | ICMP_STATS 1 |
| | ICMP_STATS==1: Enable ICMP stats.
|
| #define | IGMP_STATS (LWIP_IGMP) |
| | IGMP_STATS==1: Enable IGMP stats.
|
| #define | UDP_STATS (LWIP_UDP) |
| | UDP_STATS==1: Enable UDP stats.
|
| #define | TCP_STATS (LWIP_TCP) |
| | TCP_STATS==1: Enable TCP stats.
|
| #define | MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0)) |
| | MEM_STATS==1: Enable mem.c stats.
|
| #define | MEMP_STATS (MEMP_MEM_MALLOC == 0) |
| | MEMP_STATS==1: Enable memp.c pool stats.
|
| #define | SYS_STATS (NO_SYS == 0) |
| | SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
|
| #define | PPP_SUPPORT 0 |
| | PPP_SUPPORT==1: Enable PPP.
|
| #define | PPPOE_SUPPORT 0 |
| | PPPOE_SUPPORT==1: Enable PPP Over Ethernet.
|
| #define | PPPOS_SUPPORT PPP_SUPPORT |
| | PPPOS_SUPPORT==1: Enable PPP Over Serial.
|
| #define | CHECKSUM_GEN_IP 1 |
| | CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
|
| #define | CHECKSUM_GEN_UDP 1 |
| | CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
|
| #define | CHECKSUM_GEN_TCP 1 |
| | CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
|
| #define | CHECKSUM_CHECK_IP 1 |
| | CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
|
| #define | CHECKSUM_CHECK_UDP 1 |
| | CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
|
| #define | CHECKSUM_CHECK_TCP 1 |
| | CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
|
| #define | LWIP_CHECKSUM_ON_COPY 0 |
| | LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from application buffers to pbufs.
|
| #define | LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL |
| | LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is compared against this value.
|
| #define | LWIP_DBG_TYPES_ON LWIP_DBG_ON |
| | LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable debug messages of certain types.
|
| #define | ETHARP_DEBUG LWIP_DBG_OFF |
| | ETHARP_DEBUG: Enable debugging in etharp.c.
|
| #define | NETIF_DEBUG LWIP_DBG_OFF |
| | NETIF_DEBUG: Enable debugging in netif.c.
|
| #define | PBUF_DEBUG LWIP_DBG_OFF |
| | PBUF_DEBUG: Enable debugging in pbuf.c.
|
| #define | API_LIB_DEBUG LWIP_DBG_OFF |
| | API_LIB_DEBUG: Enable debugging in api_lib.c.
|
| #define | API_MSG_DEBUG LWIP_DBG_OFF |
| | API_MSG_DEBUG: Enable debugging in api_msg.c.
|
| #define | SOCKETS_DEBUG LWIP_DBG_OFF |
| | SOCKETS_DEBUG: Enable debugging in sockets.c.
|
| #define | ICMP_DEBUG LWIP_DBG_OFF |
| | ICMP_DEBUG: Enable debugging in icmp.c.
|
| #define | IGMP_DEBUG LWIP_DBG_OFF |
| | IGMP_DEBUG: Enable debugging in igmp.c.
|
| #define | INET_DEBUG LWIP_DBG_OFF |
| | INET_DEBUG: Enable debugging in inet.c.
|
| #define | IP_DEBUG LWIP_DBG_OFF |
| | IP_DEBUG: Enable debugging for IP.
|
| #define | IP_REASS_DEBUG LWIP_DBG_OFF |
| | IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
|
| #define | RAW_DEBUG LWIP_DBG_OFF |
| | RAW_DEBUG: Enable debugging in raw.c.
|
| #define | MEM_DEBUG LWIP_DBG_OFF |
| | MEM_DEBUG: Enable debugging in mem.c.
|
| #define | MEMP_DEBUG LWIP_DBG_OFF |
| | MEMP_DEBUG: Enable debugging in memp.c.
|
| #define | SYS_DEBUG LWIP_DBG_OFF |
| | SYS_DEBUG: Enable debugging in sys.c.
|
| #define | TIMERS_DEBUG LWIP_DBG_OFF |
| | TIMERS_DEBUG: Enable debugging in timers.c.
|
| #define | TCP_DEBUG LWIP_DBG_OFF |
| | TCP_DEBUG: Enable debugging for TCP.
|
| #define | TCP_INPUT_DEBUG LWIP_DBG_OFF |
| | TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
|
| #define | TCP_FR_DEBUG LWIP_DBG_OFF |
| | TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
|
| #define | TCP_RTO_DEBUG LWIP_DBG_OFF |
| | TCP_RTO_DEBUG: Enable debugging in TCP for retransmit timeout.
|
| #define | TCP_CWND_DEBUG LWIP_DBG_OFF |
| | TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
|
| #define | TCP_WND_DEBUG LWIP_DBG_OFF |
| | TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
|
| #define | TCP_OUTPUT_DEBUG LWIP_DBG_OFF |
| | TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
|
| #define | TCP_RST_DEBUG LWIP_DBG_OFF |
| | TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
|
| #define | TCP_QLEN_DEBUG LWIP_DBG_OFF |
| | TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
|
| #define | UDP_DEBUG LWIP_DBG_OFF |
| | UDP_DEBUG: Enable debugging in UDP.
|
| #define | TCPIP_DEBUG LWIP_DBG_OFF |
| | TCPIP_DEBUG: Enable debugging in tcpip.c.
|
| #define | PPP_DEBUG LWIP_DBG_OFF |
| | PPP_DEBUG: Enable debugging for PPP.
|
| #define | SLIP_DEBUG LWIP_DBG_OFF |
| | SLIP_DEBUG: Enable debugging in slipif.c.
|
| #define | DHCP_DEBUG LWIP_DBG_OFF |
| | DHCP_DEBUG: Enable debugging in dhcp.c.
|
| #define | AUTOIP_DEBUG LWIP_DBG_OFF |
| | AUTOIP_DEBUG: Enable debugging in autoip.c.
|
| #define | SNMP_MSG_DEBUG LWIP_DBG_OFF |
| | SNMP_MSG_DEBUG: Enable debugging for SNMP messages.
|
| #define | SNMP_MIB_DEBUG LWIP_DBG_OFF |
| | SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.
|
| #define | DNS_DEBUG LWIP_DBG_OFF |
| | DNS_DEBUG: Enable debugging for DNS.
|
Deniz Coban
Deneme
Home
History
Graph
API Documentation
Wiki
Pull Requests
Embed:
(wiki syntax)
0
0
1
0
0
0