Arend-Paul Spijkerman
First quick attempt at an oscilloscope demo for the stampdock software of http://stampdock.com/ it demonstrates how to use the stampdock software from an mbed
Revision 0:6a0d5fb13029, committed 2010-11-02
- Comitter:
- apspijkerman
- Date:
- Tue Nov 02 15:30:43 2010 +0000
- Commit message:
- First version
Changed in this revision
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
| mbed.bld | Show annotated file Show diff for this revision Revisions of this file |
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Tue Nov 02 15:30:43 2010 +0000
@@ -0,0 +1,1357 @@
+
+
+// mbed demo program (needs stampdock software)
+// by apspijkerman ap@apsdev.com
+
+
+#include "mbed.h"
+
+//Serial pc(USBTX, USBRX); // tx, rx
+Serial serial(USBTX, USBRX); // tx, rx default 9600 8N1
+
+AnalogIn xa(p15);
+AnalogIn ya(p16);
+
+DigitalOut myled1(LED1);
+DigitalOut myled2(LED2);
+DigitalOut myled3(LED3);
+DigitalOut myled4(LED4);
+
+
+void SetLed(int led, int mode)
+{
+ if (led == 0) myled1 = mode;
+ if (led == 1) myled2 = mode;
+ if (led == 2) myled3 = mode;
+ if (led == 3) myled4 = mode;
+}
+
+
+void Blink(int led)
+{
+ if (led == 0) myled1 = 1;
+ if (led == 1) myled2 = 1;
+ if (led == 2) myled3 = 1;
+ if (led == 3) myled4 = 1;
+ wait(0.1);
+ if (led == 0) myled1 = 0;
+ if (led == 1) myled2 = 0;
+ if (led == 2) myled3 = 0;
+ if (led == 3) myled4 = 0;
+}
+
+
+
+void SetLeds(void)
+{
+ int t;
+
+// flash all leds
+/*
+ for (t = 0; t < 4; t++){
+ SetLed(t, 1);
+ }
+ wait(1);
+ for (t = 0; t < 4; t++){
+ SetLed(t, 0);
+ }
+*/
+// kitt led test
+ for (t = 0; t < 4; t++){
+ SetLed(t, 1);
+ wait(0.2);
+ SetLed(t, 0);
+ }
+}
+
+
+
+void ToggleLed(int led)
+{
+ if (led == 0) myled1 = !myled1;
+ if (led == 1) myled2 = !myled2;
+ if (led == 2) myled3 = !myled3;
+ if (led == 3) myled4 = !myled4;
+ wait(0.25);
+}
+
+//public class demo {
+
+ // seems we need to write commands in one go, so have a buffer
+ //static StringBuffer buf = new StringBuffer(128);
+
+ // check if the system has events for us
+ // if value greater then zero then thats the ID number of
+ // the gui element or the event number
+
+
+void InitStampdock(void)
+{
+// serial.begin( 9600 );
+// serial.baud(19200);
+// serial.format(8,None,1);
+ SetLeds();
+
+}
+
+
+
+ static int GetEvent()
+ {
+ int e = 0, ready = 0, cnt = 0;
+ char v;
+ // DEBUG "?Q;" 'query for events .. also sync with PC
+ // SERIN 16, Baud, [x] '16468
+ // PAUSE 1 ' millisecs .. let serial bus settle
+
+ //serial.printf("\n"); // test .. purge buffer ?
+ serial.printf("?Q;"); // query for event
+ //wait(0.11); //CPU.delay(1); // ??
+ do{
+ if (serial.readable()){
+ //v = Serial.read();
+ v = serial.getc();
+
+ e = v;
+ if (e < 0) e += 256; // signed char to int ?
+
+ //e = (255-v) + 1; // 2's complement
+
+ //serial.printf("EVENT:");
+ //serial.printf(e);
+ //serial.printf("<-");
+ ready = 1;
+ }else{
+ //serial.printf("no event");
+ wait(0.0001);
+ cnt++;
+ if (cnt == 1000) ready = 1;
+ Blink(0);
+ }
+ }while(!ready);
+ //CPU.delay(10);
+
+ // .. flush out of sync events ..
+ //while (serial.readable()){
+ if (serial.readable()){
+ // Serial.read();
+ serial.getc();
+ Blink(1);
+ }
+
+ if (serial.readable()){
+ // Serial.read();
+ serial.getc();
+ Blink(2);
+ }
+
+ return e;
+ }
+
+ // request the state of GUI element i
+
+ static int GetValue(int i)
+ {
+ int e = 0, ready = 0, cnt = 0;
+ char v;
+ //StringBuffer buf=new StringBuffer(12);
+
+ // DEBUG "?i",DEC x,";" 'get state of gui element x
+ // SERIN 16, Baud, [s] '16468
+ // PAUSE 1 ' millisecs
+
+ //serial.printf("?i"); // query for event
+ //serial.printf(i);
+ //serial.printf(";");
+
+ //buf.clear();
+ //buf.append("?i");
+ //buf.append( i );
+ //buf.append(";");
+ //System.out.print(buf.toString());
+
+ serial.printf("?i%d;", i );
+
+ //wait(0.1); //CPU.delay(1); // ??
+ do {
+ if (serial.readable()){
+ //v = Serial.read();
+ v = serial.getc();
+
+ e = v;
+ if (e < 0) e += 256; // signed char to int ?
+
+ //e = (255-v) + 1; // 2's complement
+ ready = 1;
+ }else{
+ wait(0.0001);
+ cnt++;
+ if (cnt == 1000) ready = 1;
+ }
+ //CPU.delay(10);
+ }while(!ready);
+ return e;
+ }
+
+ // set the state (v) of gui element i
+
+ static void SetValue(int i, int v)
+ {
+ //StringBuffer buf=new StringBuffer(16);
+
+ // DEBUG "?i",DEC x,";" 'get state of gui element x
+ // SERIN 16, Baud, [s] '16468
+ // PAUSE 1 ' millisecs
+
+ //serial.printf("!i"); // set value
+ //serial.printf(i);
+ //serial.printf(",")
+ //serial.printf(v);
+ //serial.printf(";");
+
+ //buf.clear(); // slow ascii method to allow values > 255
+ if (i <= 255){
+ //buf.append("!ib"); // fast binary way
+ //buf.append((char) 2 ); // write 2 bytes
+ //buf.append((char) i ); // write id
+ //buf.append((char) v ); // always smaller als 256
+
+ serial.printf("!ib%c%c%c;", 2 , i , v );
+ }else{
+ //buf.append("!i"); // slow ascii way
+ //buf.append( i ); // in case ID greater as 255
+ //buf.append(",");
+ //buf.append( v );
+
+ serial.printf("!i%d,%d;", i, v);
+ }
+ //buf.append(";");
+ //System.out.print(buf.toString());
+
+ //CPU.delay(1); // ??
+ }
+
+
+ static char ReadByte()
+ {
+ char v = 0, ready = 0, cnt = 0;
+
+ //wait(0.1);
+ do {
+ if (serial.readable()){
+ //v = Serial.read();
+ v = serial.getc();
+
+ //e = v;
+ //if (e < 0) e += 256; // signed char to int ?
+ ready = 1;
+ }else{
+ wait(0.0001);
+ cnt++;
+ if (cnt == 1000) ready = 1;
+ }
+ }while(!ready);
+ return v;
+ }
+
+
+ static void SetColor(int r, int g, int b)
+ {
+ // StringBuffer buf=new StringBuffer(12);
+
+ if (r == 0 && g == 0 && b == 0){
+ serial.printf("!s;"); // black
+ }else{
+ //buf.clear();
+ //buf.append("!sb"); // fast binary method .. so values <= 255
+ //buf.append((char) 3 ); // write 3 bytes
+ //buf.append((char) r );
+ //buf.append((char) g );
+ //buf.append((char) b );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("!sb%c%c%c%c;", 3, r, g, b );
+ }
+ //CPU.delay(1); // ??
+ }
+
+
+ static void SetGrey(int g)
+ {
+ // StringBuffer buf=new StringBuffer(12);
+
+ // DEBUG "!fb", 1, dat, ";"
+
+ if (g == 0){
+ //System.out.print("!f;"); // black
+ serial.printf("!f;"); // black
+ }else{
+ //buf.clear();
+ //buf.append("!fb"); // fast binary method .. so values <= 255
+ //buf.append((char) 1 ); // write 3 bytes
+ //buf.append((char) g );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+
+ serial.printf("!sf%c%c;", 1, g );
+ }
+ //CPU.delay(1); // ??
+ }
+
+
+
+ static void SetLED(int i, int r, int g, int b)
+ {
+ // StringBuffer buf=new StringBuffer(12);
+
+ //buf.clear();
+ //buf.append("!jb"); // fast binary method .. so values <= 255
+ //buf.append((char) 4 ); // write 4 bytes
+ //buf.append((char) i );
+ //buf.append((char) r );
+ //buf.append((char) g );
+ //buf.append((char) b );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("!jb%c%c%c%c%c;", 4, i, r, g, b );
+
+ //CPU.delay(1); // ??
+ }
+
+ static void DrawLine(int x1, int y1, int x2, int y2)
+ {
+ //StringBuffer buf=new StringBuffer(36);
+
+ //if (x1 < 0) x1 = 0;
+ //if (y1 < 0) y1 = 0;
+ //if (x2 < 0) x2 = 0;
+ //if (y2 < 0) y2 = 0;
+
+ //buf.clear();
+ if (x1 >= 0 && x1 <= 255 && y1 >= 0 && y1 <= 255 && x2 >= 0 && x2 <= 255 && y2
+
+>= 0 && x2 <= 255){
+ //buf.append("!lb"); // fast binary method
+ //buf.append((char) 4 ); // write 4 bytes
+ //buf.append((char) x1 );
+ //buf.append((char) y1 );
+ //buf.append((char) x2 );
+ //buf.append((char) y2 );
+
+ serial.printf("!lb%c%c%c%c%c;", 4, x1, y1, x2, y2 );
+ }else{
+ //buf.append("!l"); // slow method .. so values > 255
+ //buf.append( x1 );
+ //buf.append("," );
+ //buf.append( y1 );
+ //buf.append("," );
+ //buf.append( x2 );
+ //buf.append("," );
+ //buf.append( y2 );
+
+ serial.printf("!l%d,%d,%d,%d;", x1, y1, x2, y2);
+ }
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ //CPU.delay(1); // ??
+ }
+
+ static void Plot(int x, int y)
+ {
+ //StringBuffer buf=new StringBuffer(16);
+
+ //if (x < 0) x = 0;
+ //if (y < 0) y = 0;
+
+ //buf.clear();
+ if (x >= 0 && x <= 255 && y >= 0 && y <= 255){
+ //buf.append("!pb"); // fast method .. so values <= 255
+ //buf.append((char) 2 ); // write 2 bytes
+ //buf.append((char) x );
+ //buf.append((char) y );
+
+ serial.printf("!pb%c%c%c;", 2, x, y);
+ }else{
+ //buf.append("!p"); // slow method .. so values > 255
+ //buf.append( x );
+ //buf.append("," );
+ //buf.append( y );
+
+ serial.printf("!p%d,%d;", x, y);
+ }
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ //CPU.delay(1); // ??
+ }
+
+
+ static void DrawGrid(int a, int b, int c, int d, int e, int f)
+ {
+ //StringBuffer buf=new StringBuffer(36);
+
+ //buf.clear();
+ //buf.append("!ab"); // fast binary method
+ //buf.append((char) 6 ); // write 6 bytes
+ //buf.append((char) a ); // xspace
+ //buf.append((char) b ); // yspace
+ //buf.append((char) c ); // xlines
+ //buf.append((char) d ); // ylines
+ //buf.append((char) e ); // xoffset
+ //buf.append((char) f ); // yoffset
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("!ab%c%c%c%c%c%c%c;", 6, a, b, c, d, e, f );
+
+ //CPU.delay(1); // ??
+ }
+
+ static void ClearScreen()
+ {
+ serial.printf("!c;");
+ }
+
+ // shortcut: Cmd("!c;"); or Cmd("?O;");
+
+ static void Cmd(char *p)
+ {
+ serial.printf(p);
+ }
+
+ // for "!nSpeech;" or "!Llog file;"
+
+ static void CmdStr(char cmd, char *p )
+ {
+ //buf.clear();
+ //buf.append("!");
+ //buf.append( cmd );
+ //buf.append( p );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("!%c%s;", cmd, p);
+ }
+
+ // cmd with no argument so Cmd0('s'); = "!s;"
+
+ static void Cmd0(char cmd )
+ {
+ //buf.clear();
+ //buf.append("!");
+ //buf.append( cmd );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("!%c;", cmd);
+ }
+
+ // request with no arguments
+ // Req0( 'm' ); = "?m;"
+
+ static void Req0(char req )
+ {
+ //buf.clear();
+ //buf.append("?");
+ //buf.append( req );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("?%c;", req );
+ }
+
+ // cmd with 1 arg Cmd1('a' , 1 ); = "!a1;"
+
+ static void Cmd1(char cmd, int arg1 )
+ {
+ //buf.clear();
+ //buf.append("!");
+ //buf.append( cmd );
+ if (arg1 < 256){
+ //buf.append( 'b' ); // binary mode
+ //buf.append((char) 1 ); // 1 argument
+ //buf.append((char) arg1 );
+
+ serial.printf("!%cb%c%c;", cmd, 1, arg1 );
+ }else{
+ //buf.append( arg1 ); // slow ascii mode
+
+ serial.printf("!%c%d;", cmd, arg1 );
+ }
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+ }
+
+ // cmd with 2 args Cmd2('G', 20, 1); = "!G20,1;"
+ // plot = Cmd2( 'p', x, y );
+
+ static void Cmd2(char cmd, int arg1, int arg2 )
+ {
+ //buf.clear();
+ //buf.append("!" ); // !
+ //buf.append( cmd );
+ if (arg1 < 255 && arg2 < 255){
+ //buf.append( 'b' ); // binary mode
+ //buf.append((char) 2 ); // 2 arguments
+ //buf.append((char) arg1 );
+ //buf.append((char) arg2 );
+
+ serial.printf("!%cb%c%c%c;", cmd, 2, arg1, arg2 );
+ }else{
+ //buf.append( arg1 ); // slow ascii mode
+ //buf.append("," );
+ //buf.append( arg2 );
+
+ serial.printf("!%c%d,%d;", cmd, arg1, arg2 );
+ }
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+ }
+
+ // cmd with 3 args
+ // setcolor = Cmd3( 's', r, g, b );
+
+ static void Cmd3(char cmd, int arg1, int arg2, int arg3 )
+ {
+ //buf.clear();
+ //buf.append("!" ); // !
+ //buf.append( cmd );
+ if (arg1 < 255 && arg2 < 255 && arg3 < 255){
+ //buf.append( 'b' ); // binary mode
+ //buf.append((char) 3 ); // 3 arguments
+ //buf.append((char) arg1 );
+ //buf.append((char) arg2 );
+ //buf.append((char) arg3 );
+
+ serial.printf("!%cb%c%c%c%c;", cmd, 3, arg1, arg2, arg3 );
+ }else{
+ //buf.append( arg1 ); // slow ascii mode
+ //buf.append("," );
+ //buf.append( arg2 );
+ //buf.append("," );
+ //buf.append( arg3 );
+
+ serial.printf("!%c%d,%d,%d;", cmd, arg1, arg2, arg3 );
+ }
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+ }
+
+ // cmd with 4 args
+ // line = Cmd4( 'l', x1, y1, x2, y2);
+
+ static void Cmd4(char cmd, int arg1, int arg2, int arg3, int arg4 )
+ {
+ //buf.clear();
+ //buf.append("!" ); // !
+ //buf.append( cmd );
+ if (arg1 < 255 && arg2 < 255 && arg3 < 255 && arg4 < 255){
+ //buf.append( 'b' ); // binary mode
+ //buf.append((char) 4 ); // 4 arguments
+ //buf.append((char) arg1 );
+ //buf.append((char) arg2 );
+ //buf.append((char) arg3 );
+ //buf.append((char) arg4 );
+
+ serial.printf("!%cb%c%c%c%c%c;", cmd, 4, arg1, arg2, arg3, arg4 );
+ }else{
+ //buf.append( arg1 ); // slow ascii mode
+ //buf.append("," );
+ //buf.append( arg2 );
+ //buf.append("," );
+ //buf.append( arg3 );
+ //buf.append("," );
+ //buf.append( arg4 );
+
+ serial.printf("!%c%d,%d,%d,%d;", cmd, arg1, arg2, arg3, arg4 );
+ }
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+ }
+
+ // play video, mp3 or picture
+
+ static void Media(char *p)
+ {
+ //buf.clear();
+ //buf.append("!V");
+ //buf.append( p );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("!V%s;", p);
+ }
+
+ static void Speech(char *p)
+ {
+ //buf.clear();
+ //buf.append("!n");
+ //buf.append( p );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("!n%s;", p);
+ }
+
+ static void Log(char *p)
+ {
+ //buf.clear();
+ //buf.append("!L");
+ //buf.append( p );
+ //buf.append(";" );
+ //System.out.print(buf.toString());
+
+ serial.printf("!L%s;", p);
+ }
+
+ static void ScrollLeft()
+ {
+ serial.printf("!G20,1;");
+ }
+
+/*
+ static void DrawGrid(int a, int b, int c, int d, int e, int f)
+ {
+ //StringBuffer buf=new StringBuffer(36);
+
+ //buf.clear();
+ //buf.append("!ab"); // fast binary method
+ //buf.append((char) 6 ); // write 6 bytes
+ //buf.append((char) a ); // xspace
+ //buf.append((char) b ); // yspace
+ //buf.append((char) c ); // xlines
+ //buf.append((char) d ); // ylines
+ //buf.append((char) e ); // xoffset
+ //buf.append((char) f ); // yoffset
+ //buf.append(";" );
+
+ //System.out.print(buf.toString());
+
+ serial.printf("!ab%c%c%c%c%c%c%c;", 6, a, b, c, d, e, f );
+
+ //CPU.delay(1); // ??
+ }
+*/
+
+ /*
+ static void initpins() {
+ // OUTPUT dischargecap 'capacitor reset p 15
+ // LOW dischargecap 'disable p 15
+
+ // OUTPUT chargecap 'capacitor charge p 14
+ // HIGH chargecap 'disable p 14
+
+ // INPUT chanblow 'channel b p 12
+ // INPUT chanalow 'channel a p 13
+ // INPUT chanbhigh 'channel b high p 10
+ // INPUT chanahigh 'channel a high p 11
+
+ CPU.setInput (CPU.pins[10]); // chan b high opamp
+ CPU.setInput (CPU.pins[11]); // chan a high opamp
+ CPU.setInput (CPU.pins[12]); // chan b low opamp
+ CPU.setInput (CPU.pins[13]); // chan a low opamp
+
+ CPU.setOutput(CPU.pins[14]); // charge cap pin
+ CPU.setOutput(CPU.pins[15]); // discarge cap pin
+
+ CPU.writePin (CPU.pins[15] , false );
+ CPU.writePin (CPU.pins[14] , true );
+ }
+
+
+ // interface with ltc1298 chip
+
+ // static int gEnablePin; // speedup ?
+ // static int gClockPin;
+ // static int gDataPin;
+
+ static void initadc(int dataPin, int clockPin, int enablePin){
+
+ //gEnablePin = CPU.pins[enablePin]; // speedup ?
+ //gClockPin = CPU.pins[clockPin];
+ //gDataPin = CPU.pins[dataPin];
+
+ CPU.writePin(CPU.pins[enablePin],false); // init the bus
+ CPU.writePin(CPU.pins[clockPin ],false);
+ CPU.delay(100); // settle down
+ CPU.writePin(CPU.pins[enablePin],false);
+ CPU.writePin(CPU.pins[enablePin],true );
+
+ //CPU.writePin(CPU.pins[dataPin ],false ); // test
+ //Serial.print(CPU.pins[ 1 ]); // just adds one ?
+ }
+
+ static int readadc(int dataPin, int clockPin, int enablePin, int channel, int
+
+mode){
+
+ int command, readSize;
+ int clockIn;
+
+ if (channel == 0) command = 0x1a; // %11010 read ch0 (pin2)
+ else command = 0x1e; // %11110 read ch1 (pin3)
+
+ readSize = 12; // Bytes to Read on the LTC1298
+ //resolution = 4096; // Range of the LTC1298
+ //clockIn = 1000;
+
+ CPU.writePin(CPU.pins[enablePin],false);
+ // set port
+ CPU.shiftOut(CPU.pins[dataPin],CPU.pins[clockPin],5,CPU.SHIFT_MSB,(command <<
+
+11));
+ // read the value
+ clockIn =
+
+CPU.shiftIn(CPU.pins[dataPin],CPU.pins[clockPin],readSize,CPU.PRE_CLOCK_MSB);
+ CPU.writePin(CPU.pins[enablePin],true);
+
+ //CPU.delay(100);
+ //CPU.writePin(CPU.pins[dataPin],false ); // test
+ //CPU.setInput(dataPin);
+
+
+ if (mode == 0){ // low
+ clockIn = clockIn - (2048-128);
+ }else{
+ if (mode == 1){ // high
+ //clockIn = clockIn / 16; // make 8 bits from 12
+ clockIn = clockIn >> 4; // make 8 bits from 12
+ }else{ // gnd
+ clockIn = 128;
+ }
+ }
+
+ // Serial.print("v:");
+ // Serial.print(channel);
+ // Serial.print(",");
+ // Serial.print(clockIn);
+ // Serial.println("");
+
+ return clockIn;
+ }
+ */
+
+
+ /*
+ static int measure(int channel, int mode) {
+ int e, time;
+
+ if (channel == 0){ // chan a
+ if (mode == 0){
+ e = 13; // a low
+ }else{
+ if (mode == 1){
+ e = 11; // a high
+ }else{
+ return 128; // gnd
+ }
+ }
+ }else{ // chan b
+ if (mode == 0){
+ e = 12; // b low
+ }else{
+ if (mode == 1){
+ e = 10; // b high
+ }else{
+ return 128; // gnd
+ }
+ }
+ }
+
+ // PULSOUT dischargecap, 10 '2uS units -> 20uS
+
+ //CPU.writePin(CPU.pins[15] , 1 ); // discharge cap
+ //CPU.delay( 1 );
+ //CPU.writePin(CPU.pins[15] , 0 );
+ CPU.pulseOut(2, CPU.pins[15] ); // 2 x 8.7 = 17 uS
+
+ // LOW chargecap 'start charge
+ // RCTIME chanahigh, 0 , val 'PULSIN
+ // HIGH chargecap 'stop charge
+
+ CPU.writePin(CPU.pins[14] , false );
+ time = CPU.rcTime( 1000 ,CPU.pins[ e ], true ); // 8.68 uS units (0-200uS)
+ CPU.writePin(CPU.pins[14] , true );
+
+ //CPU.readPin( CPU.pins[e]); // switch back to input
+ time = time << 3; // resolution 8 times lower as basic stamp
+
+ return time;
+ }
+ */
+
+
+
+/*
+ val = readadc(2,1,0, 0, ChanAMode );
+ val = readadc(2,1,0, 1, ChanBMode ); ;
+*/
+// mode0 = low , mode1 = high
+
+int readadc(int p1, int p2, int p3, int chan, int mode)
+{
+ int ret;
+
+ if (mode == 0){
+ if (chan == 0) ret = xa * 4096;
+ if (chan == 1) ret = ya * 4096;
+ }
+ if (mode == 1){
+ if (chan == 0) ret = xa * 256;
+ if (chan == 1) ret = ya * 256;
+ }
+
+ return ret;
+}
+
+int measure( int chan, int mode)
+{
+ int ret;
+
+ if (mode == 0){
+ if (chan == 0) ret = xa * 4096;
+ if (chan == 1) ret = ya * 4096;
+ }
+ if (mode == 1){
+ if (chan == 0) ret = xa * 256;
+ if (chan == 1) ret = ya * 256;
+ }
+
+ return ret;
+}
+#define boolean int
+
+ // ChanXMode '0=off, 1=low, 2=high, 3=gnd ?
+ // Mode '0=scope, 1=XY, 2=record (3=off ?)
+
+
+
+
+
+int main() {
+ boolean UseChanA = true, UseChanB = true; // Bit
+ boolean ready, grid = true, adc = false; // Bit
+ int ChanAMode = 0, ChanBMode = 0, mode = 0; // Nib
+ int PosA = 128, PosB = 128;
+
+ int val, valb, ecnt = 0; // Word
+ int pval = 0, pvalb = 0; // Bytes
+ int x, s, cnt = 0, ptr, speed = 0; // Byte
+
+ boolean trigMode = true, trigEdge = false, trigSrc = false; // Bit
+ int trigLevel = 127; // Byte (128 results in 127 !)
+ int mem[100]; // [] mem;
+
+ //StringBuffer serbuf = new StringBuffer(80);
+
+ //mem = new int [100];
+
+ InitStampdock();
+
+
+ //initpins();
+ //initadc(2,1,0);
+
+ //for (s = 0; s < 100; s++) System.out.print((char) 127 );
+ //System.out.print((char) 127 );
+ //System.out.print("scope running .. ");
+ serial.printf("scope running .. ");
+
+ // reset value of gui buttons if reset
+ SetValue(1, mode); // System.out.print("!i1,0;"); // mode, 0 is xt scope
+
+ SetValue(102,0); // System.out.print("!i102,1;"); // on/off switch on
+ if (grid) SetValue(103,1); else SetValue(103,0); // System.out.print("!i103,1;"); // grid switch on
+ if (adc) SetValue(104,1); else SetValue(104,0); // System.out.print("!i104,0;"); // ltc1298 off
+
+ SetValue(30, speed); // System.out.print("!i30,0;"); // speed switch 0
+ SetValue(40, trigLevel); // System.out.print("!i40,128;"); // trigger level 128
+ if (trigMode) SetValue(41,1); else SetValue(41,0); // System.out.print("!i41,1;"); // trigger on
+ if (trigEdge) SetValue(42,1); else SetValue(42,0); // System.out.print("!i42,1;"); // trigger edge
+ if (trigSrc) SetValue(43,1); else SetValue(43,0); // System.out.print("!i43,0;"); // trigger source
+
+ SetValue(10, PosA); // System.out.print("!i10,128;"); // pos chan a
+ SetValue(12, ChanAMode); // System.out.print("!i12,0;"); // chan a mode
+ if (UseChanA) SetValue(11,1); else SetValue(11,0); // System.out.print("!i11,1;"); // channel a on
+
+ SetValue(20, PosB); // System.out.print("!i20,128;"); // pos chan b
+ SetValue(22, ChanBMode); // System.out.print("!i22,0;"); // chan b mode
+ if (UseChanB) SetValue(21,1); else SetValue(21,0); // System.out.print("!i21,1;"); // channel b on
+
+ while (true){
+ if (ecnt == 2){ // test speed up
+ x = GetEvent();
+ ecnt = 0;
+ }else{
+ ecnt++;
+ x = 0;
+ }
+
+ if (x != 0){ // do we have a gui click or event ?
+ ecnt = 0; // just had an event, so max wait
+ s = GetValue(x); // get value of gui element x
+
+ // now handle GUI element x with value/state s
+ if (x == 1){ //mode 0=scope, 1=xy, 2=rec(,3 =off ?)
+ mode = s;
+ // clear graph
+ //'DEBUG "!s100,100,200;!c;" 'set blue color , clear screen 17c
+ //DEBUG "!sb",3, 100,100,200, ";!c;" 'fast binary way to set color 11c
+ //System.out.print("!s100,100,200;!c;");
+ SetColor(100,100,200);
+ ClearScreen();
+ } else
+ if (x == 102){ // on/off switch ??
+ // mode = s;
+ } else
+ if (x == 100){ // turnknob for recorder
+ // mode = s;
+ } else
+ if (x == 103){ // grid on/off switch
+ //grid = s;
+ if (s == 0) grid = false; else grid = true;
+ } else
+ if (x == 104){ // ltc1298 on/off switch
+ //grid = s;
+ if (s == 0) adc = false; else adc = true;
+ } else
+ if (x == 30){ // speed 0,1,2,3
+ speed = s;
+ } else
+
+
+
+
+ if (x == 40){ // trigger level
+ trigLevel = 255 - s;
+ } else
+ if (x == 41){ // trigger on/off
+ //trigMode = s;
+ if (s == 0) trigMode = false; else trigMode = true;
+ } else
+ if (x == 42){ // trigger edge
+ //trigEdge = s;
+ if (s == 0) trigEdge = false; else trigEdge = true;
+ } else
+ if (x == 43){ // trigger source
+ //trigSrc = s;
+ if (s == 0) trigSrc = false; else trigSrc = true;
+ } else
+
+ if (x == 10){ // pos chan a
+ PosA = s;
+ } else
+ if (x == 11){ // chan a on/off
+ //UseChanA = s;
+ if (s == 0) UseChanA = false; else UseChanA = true;
+ } else
+ if (x == 12){ // chan a mode (0=1.5v, 1=15v, 2=gnd)
+ ChanAMode = s;
+ } else
+
+ if (x == 20){ // pos chan b
+ PosB = s;
+ } else
+ if (x == 21){ // chan b on/off
+ //UseChanB = s;
+ if (s == 0) UseChanB = false; else UseChanB = true;
+ } else
+ if (x == 22){ // chan b mode (0=1.5v, 1=15v, 2=gnd)
+ ChanBMode = s;
+ }
+ } // if event
+
+
+ if (mode == 0){ // xt scope mode
+ // trigger
+ if (trigMode){
+
+ if (trigEdge == false){
+ pval = 255;
+ }else{
+ pval = 0;
+ }
+ cnt = 0;
+ ready = false;
+ do {
+ cnt++;
+ if (cnt == 20) ready = true;
+
+ if (adc){ // ltc 1298 mode
+ if (trigSrc == false){ // chan a
+ val = readadc(2,1,0, 0, ChanAMode );
+ }else{ // chan b
+ val = readadc(2,1,0, 1, ChanBMode ); ;
+ }
+ }else{ // opamp/transistor mode
+
+ if (trigSrc == false){ // chan a
+ val = measure(0, ChanAMode );
+ }else{ // chan b
+ val = measure(1, ChanBMode );
+ }
+
+ }
+ // now val is the value we want to check trigger on
+
+ if (trigEdge == false) {
+ if (trigLevel < val && trigLevel >= pval) ready = true;
+ }else{
+ if (trigLevel > val && trigLevel <= pval) ready = true;
+ }
+ pval = val;
+
+ }while (!ready);
+ } // trigMode
+
+ ptr = 0; // mem counter
+ if (adc){ // ltc 1298 mode
+ for (cnt = 0; cnt <= 29; cnt++){
+ if (UseChanA){
+ //val = readadc(2,1,0, 0, ChanAMode );
+ //if (ChanAMode == 0){
+ // val = val - (2048-128);
+ //}else{
+ // val = val >> 4;
+ //}
+ //mem[ptr] = val;
+ mem[ptr] = readadc(2,1,0, 0, ChanAMode );
+ }
+ ptr++;
+
+ if (UseChanB){
+ //val = readadc(2,1,0, 1, ChanBMode );
+ //if (ChanBMode == 0){
+ // val = val - (2048-128);
+ //}else{
+ // val = val >> 4;
+ //}
+ //mem[ptr] = val;
+ mem[ptr] = readadc(2,1,0, 1, ChanBMode );
+ }
+ ptr++;
+
+ if (speed > 0){
+ if (speed == 1) wait(0.001); // CPU.delay(speed);
+ if (speed == 2) wait(0.01 ); // CPU.delay(speed);
+ if (speed == 3) wait(0.1 ); // CPU.delay(speed);
+ }
+ } // for
+ }else{ // opamp/transistor mode
+ for (cnt = 0; cnt <= 29; cnt++){
+ if (UseChanA){
+ //val = measure(0, ChanAMode );
+ //mem[ptr] = val;
+ mem[ptr] = measure(0, ChanAMode );
+ }
+ ptr++;
+
+ if (UseChanB){
+ //val = measure(1, ChanBMode );
+ //mem[ptr] = val;
+ mem[ptr] = measure(1, ChanBMode );
+ }
+ ptr++;
+
+ if (speed > 0){
+ if (speed == 1) wait(0.001); // CPU.delay(speed);
+ if (speed == 2) wait(0.01 ); // CPU.delay(speed);
+ if (speed == 3) wait(0.1 ); // CPU.delay(speed);
+ }
+ } // for
+ } // !adc
+
+ // ' clear graph
+ // 'DEBUG "!s100,100,200;!c;" 'set blue color , clear screen 17c
+ // DEBUG "!sb",3, 100,100,200, ";!c;" 'fast binary way to set color 11c
+ //System.out.print("!s100,100,200;!c;");
+ SetColor(100,100,200);
+ ClearScreen();
+
+ if (grid){
+ //'DEBUG "!s128,128,228;" 'set lighter color 14c
+ // DEBUG "!sb",3,128,128,228,";" 'fast binary way to set color 8c
+ //System.out.print("!s128,128,228;");
+ SetColor(128,128,228);
+
+ //'DEBUG "!a20,20,29,19,55,12;" 'slow ascii way draw grid 20c
+ //DEBUG "!ab",6,20,20,29,19,55,12,";" 'fast binary way to draw grid 11c
+ //System.out.print("!a20,20,29,19,55,12;");
+ DrawGrid(20,20,29,19,55,12);
+
+ if (trigMode){
+ cnt = trigLevel;
+ if (trigSrc == false){
+ cnt = 255 - cnt + PosA - 128;
+ }else{
+ cnt = 255 - cnt + PosB - 128;
+ }
+
+ // 'DEBUG "!l", DEC 1,",", DEC cnt,",", DEC 40,",", DEC cnt, ";" 'slow
+ //DEBUG "!lb", 4,1,cnt,40,cnt,";" ' fast
+ //System.out.print("!l1,");
+ //System.out.print( cnt);
+ //System.out.print(",40,");
+ //System.out.print( cnt );
+ //System.out.print(";");
+ DrawLine(1,cnt,40,cnt);
+ } // end trigMode
+ } // end grid
+
+
+ if (UseChanA){
+ // draw channel a
+ // 'set color black
+ // 'DEBUG "!s0,0,0;" 'slow ascii way to set color 8c
+ // DEBUG "!sb",3, 0,0,0, ";" 'fast binary way to set color 8c
+ //System.out.print("!s0,0,0;");
+ SetColor(0,0,0);
+
+ ptr = 0;
+ s = mem[ ptr ];
+ s = 255 - s + PosA - 128;
+ ptr = ptr + 2;
+ s -= 60;
+
+ //DEBUG "!Pb", 33,20, 0,60 , s ' init poly line cmd in binary mode 38c
+ //' 33 is number of bytes we are going to send
+ //' 20=dx , 0=dy (which means we only send y values)
+ //' 0,60 = start x,y
+
+ //System.out.print("!P20,0,60,");
+ //System.out.print( s );
+/*
+ serbuf.clear();
+ serbuf.append("!Pb"); // poly line, binary mode
+ serbuf.append((char)33); // 33 values follow
+ serbuf.append((char)20); // dx=20
+ serbuf.append((char) 0); // dy=0 .. so only y values
+ serbuf.append((char)60); // x start
+ serbuf.append((char) s); // y start
+*/
+ serial.printf("!Pb");
+ serial.printf("%c%c%c%c%c", 33, 20, 0, 60, s);
+
+ for (cnt = 0; cnt <= 28; cnt++){
+ x = mem[ ptr ];
+ x = 255 - x + PosA - 128;
+ ptr = ptr + 2;
+
+ //'' --- slow line ---
+ //''val = cnt * 20
+ //''DEBUG "!l",DEC val,",",DEC s,",", DEC val+20,",", DEC x,";" ' chars 18
+ //'' --- faster line ---
+ //''val = cnt * 8
+ //''DEBUG "!lb", 4 , val , s, val+8 , x , ";" 'chars 8
+ //'' --- fastest line ---
+ //DEBUG x 'chars 1 (poly line cmd with constant dx)
+
+ //System.out.print( "," );
+ //System.out.print( x );
+
+ x -= 60;
+ if (x > 127) x -= 256; // int to char ?
+ //serbuf.append((char) x ); // y value of next line
+ serial.printf("%c", x ); // y value of next line
+
+ //s = x;
+ }
+ //System.out.print(";");
+ //serbuf.append(";");
+ //System.out.print(serbuf.toString());
+ serial.printf(";");
+
+ } // end UseChanA
+
+ if (UseChanB){
+ //' draw channel b
+ //'set color white
+ //'DEBUG "!s255,255,255;" 'slow ascii way to set color
+ //DEBUG "!sb",3,255,255,255,";" 'fast binary way to set color
+ //System.out.print("!s255,255,255;");
+ SetColor(255,255,255);
+
+ ptr = 1;
+ s = mem[ ptr ];
+ s = 255 - s + PosB - 128;
+ ptr = ptr + 2;
+ s -= 60;
+
+ //DEBUG "!Pb", 33,20, 0,60 , s ' init poly line cmd in binary mode 38c
+ //' 33 is number of bytes we are going to send
+ //' 20=dx , 0=dy (which means we only send y values)
+ //' 0,60 = start x,y
+
+ //System.out.print("!P20,0,60,");
+ //System.out.print( s );
+/*
+ serbuf.clear();
+ serbuf.append("!Pb");
+ serbuf.append((char)33);
+ serbuf.append((char)20);
+ serbuf.append((char) 0);
+ serbuf.append((char)60);
+ serbuf.append((char) s);
+*/
+ serial.printf("!Pb");
+ serial.printf("%c%c%c%c%c", 33, 20, 0, 60, s );
+
+ for (cnt = 0; cnt <= 28; cnt++){
+ x = mem[ ptr ];
+ x = 255 - x + PosB - 128;
+ ptr = ptr + 2;
+
+ //'' --- slow line ---
+ //''val = cnt * 20
+ //''DEBUG "!l",DEC val,",",DEC s,",", DEC val+20,",", DEC x,";"
+ //'' --- faster line ---
+ //''val = cnt * 8
+ //''DEBUG "!lb", 4 , val , s, val+8 , x , ";"
+ //'' --- fastest line ---
+ //DEBUG x 'chars 1 (poly line cmd with constant dx)
+
+ //System.out.print( "," );
+ //System.out.print( x );
+
+ x -= 60;
+ if (x > 127) x -= 256; // int to char ?
+ //serbuf.append((char) x );
+ serial.printf("%c", x );
+
+ //s = x;
+ }
+ //System.out.print(";");
+ //serbuf.append(";");
+ //System.out.print(serbuf.toString());
+ serial.printf(";");
+
+ } // end UseChanB
+
+ //CPU.delay(1);
+ } // end xt scope mode
+
+ if (mode == 2){ // recorder mode
+ if (adc){ // ltc1298 mode
+ val = readadc(2,1,0, 0, ChanAMode );
+ valb = readadc(2,1,0, 1, ChanBMode );
+ }else{
+ val = measure(0, ChanAMode );
+ valb = measure(1, ChanBMode );
+ }
+
+ val = val + PosA - 128; // offset
+ valb = valb + PosB - 128;
+
+ //' set plot color
+ //DEBUG "!s0,0,0;"
+ //System.out.print("!s0,0,0;");
+ SetColor(0,0,0);
+
+ //' plot xy
+ //'DEBUG "!p", DEC 610,",", DEC val, ";"
+ //' line xy
+ //DEBUG "!l", DEC 610,",", DEC val,",", DEC 609,",", DEC pval ,";"
+
+ //System.out.print("!l610,");
+ //System.out.print( val );
+ //System.out.print(",609,");
+ //System.out.print( pval );
+ //System.out.print(";");
+ DrawLine(610,val,609,pval);
+
+ pval = val;
+
+ //' set plot color
+ //'DEBUG "!s250,250,250;" 'slow ascii way to set color
+ //DEBUG "!sb",3,250,250,250,";" 'fast binary way to set color
+ //System.out.print("!s250,250,250;");
+ SetColor(250,250,250);
+
+ //' plot xy
+ //'DEBUG "!p", DEC 610,",", DEC valb, ";"
+ //' line xy
+ //DEBUG "!l", DEC 610,",", DEC valb,",", DEC 609,",", DEC pvalb ,";"
+
+ //System.out.print("!l610,");
+ //System.out.print( valb );
+ //System.out.print(",609,");
+ //System.out.print( pvalb );
+ //System.out.print(";");
+ DrawLine(610,valb,609,pvalb);
+
+ pvalb = valb;
+
+ // ' scrol 1 pixel to the left
+ //DEBUG "!G20,1;"
+ //System.out.print("!G20,1;");
+ serial.printf("!G20,1;");
+ } // end recorder mode
+
+ if (mode == 1){ // xy scope mode
+ if (adc){ // ltc1298 mode
+ val = readadc(2,1,0, 0, ChanAMode );
+ valb = readadc(2,1,0, 1, ChanBMode );
+ }else{
+ val = measure(0, ChanAMode );
+ valb = measure(1, ChanBMode );
+ }
+
+ //' set plot color
+ //'DEBUG "!s200,200,200;" 'slow ascii way to set color
+ //DEBUG "!sb",3,200,200,200,";" //fast binary way to set color
+ //System.out.print("!s,200,200,200;");
+ SetColor(200,200,200);
+
+ //' plot xy
+ //DEBUG "!p", DEC val,",", DEC valb, ";"
+ //System.out.print("!p");
+ //System.out.print( val );
+ //System.out.print(",");
+ //System.out.print( valb );
+ //System.out.print(";");
+ Plot(val,valb);
+
+ //' line xy
+ //DEBUG "!l", DEC val,",", DEC valb,",", DEC pval,",",DEC pvalb, ";"
+
+ //System.out.print("!l");
+ //System.out.print( val );
+ //System.out.print(",");
+ //System.out.print( valb );
+ //System.out.print(",");
+ //System.out.print( pval );
+ //System.out.print(",");
+ //System.out.print( pvalb );
+ //System.out.print(";");
+ DrawLine(val, valb, pval, pvalb);
+
+ pval = val;
+ pvalb = valb;
+
+ cnt = cnt + 1;
+ if (cnt == 50){
+ //' clear graph
+ //'DEBUG "!s100,100,200;!c;" 'set blue color , clear screen 17c
+ //DEBUG "!sb",3, 100,100,200, ";!c;" 'fast binary way to set color 11c
+ //System.out.print("!s,100,100,200;!c;");
+ SetColor(100,100,200);
+ ClearScreen();
+
+ cnt = 0;
+ }
+
+
+ } // end xy mode scope
+
+ } // end while true
+ } // end main
+
+
+
+
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Tue Nov 02 15:30:43 2010 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/e2ac27c8e93e