Revision 9:c9fb1f8e2ab8, committed 18 months ago

Comitter:

andrewcrussell

Date:

Mon Nov 14 14:18:18 2022 +0000

Parent:

8:1f9fe4d67954

Child:

10:7a93d34a419a

Commit message:

Renamed Apple Remote nov 22

Changed in this revision

--- a/Pindef1114.h	Mon Nov 14 13:02:54 2022 +0000
+++ b/Pindef1114.h	Mon Nov 14 14:18:18 2022 +0000
@@ -5,7 +5,7 @@
                             // they are all OFF
 
 DigitalOut muteout(dp13);    // drives the mute relay via a mosfet or transistor
-//DigitalOut muteLED(dp14);
+DigitalOut muteLED(dp14);
 //InterruptIn mute_int(dp11);  // mute p/button interrupt
 //DigitalIn mute(dp11);         // mute input from associated pushbutton
 
@@ -28,7 +28,7 @@
 //DigitalIn tone(dp15);
 //DigitalOut tone(dp25);          // can only be turned on and off at this stage by the r/control
 
-InterruptIn recloop_int(dp14);   //record loop interrupt
+//InterruptIn recloop_int(dp14);   //record loop interrupt
 DigitalIn recloop_in(dp14);      // record loop p/button input
 DigitalOut recloop_out(dp16);    // drives record loop LED
 DigitalOut recloop_rly(dp10); 

--- a/main.cpp	Mon Nov 14 13:02:54 2022 +0000
+++ b/main.cpp	Mon Nov 14 14:18:18 2022 +0000
@@ -43,7 +43,7 @@
 #define VUP_timeout 45      // defines max number of R/C cycles before the vol ctrl mtr drive stops
 #define VDWN_timeout 45     // as above but for volume decrease
 // Needed to ensure the motor is not burnt out
-#define DEBOUNCE 20         // this is the switch debounce time
+#define DEBOUNCE 20000     // this is the switch debounce time
 
 // PHONO_   1               // these are the input assignments written out
 // CD       2               // on select_out - see thePindef1114.h file for details
@@ -107,7 +107,7 @@
     if ((standbyflag == TRUE) && (key_press < VUP_timeout)) {
 
         FWD1 = HIGH;
-        wait(.1);           //drive the motors for a short while
+        wait_us(100000);           //drive the motors for a short while
         FWD1 = LOW;
 
     }
@@ -117,7 +117,7 @@
         key_press++;        // button remained depressed, so increment counter
     }
     toggle1 = toggle;
-//    wait_ms(1);
+//    wait_us(100000);
 }
 
 /******************************* volume decrease **********************************/
@@ -126,7 +126,7 @@
     if ((standbyflag == TRUE) && (key_press < VDWN_timeout)) {
 
         REV1 = HIGH;
-        wait(.1);           //drive the motors for a short while
+        wait_us(100000);           //drive the motors for a short while
         REV1 = LOW;
     }
     if (toggle1 != toggle) {
@@ -135,7 +135,7 @@
         key_press++;        // button remained depressed, so increment counter
     }
     toggle1 = toggle;
-    wait_ms(1);
+    wait_us(1000);
 }
 
 /********************************** stdby_isr *************************************/
@@ -154,16 +154,16 @@
 {
     __disable_irq();
     stdby_int.fall(NULL);   // on first power up cycle NO interrupts are accepted
-    wait_ms(DEBOUNCE);       // a very simple debounce
+    wait_us(DEBOUNCE);       // a very simple debounce
     do {                    // that waits for the depressed button to be released
         continue; //(1);
     } while (stdby != 1);
 
     if (standbyflag == TRUE) {      // was ON so now turn it OFF
         stby_pa = LOW;
-        wait_ms(500); // make sure the power amp is OFF
+        wait_us(500000); // make sure the power amp is OFF
 //        muteind = LOW;
-        wait_ms(1000);               // make sure the power amp output goes OFF
+        wait_us(1000000);               // make sure the power amp output goes OFF
         muteout = LOW;              // now mute the preamp
         // turn off all interrupts except the standby and rc5int
         select_int.fall(NULL);
@@ -173,9 +173,9 @@
 //        recloop_status = RECLOOP2;  // reset the select so on subsequent power up it does
         //not skip recorder input
         select_save = select_drv;   // save the status of select_drv
-        wait(.2);
+        wait_us(200000);
         select_drv = 0;             // all input select relays are OFF
-        wait(3);
+        wait_us(3000000);
         standbyflag = FALSE;
 //        muteind = HIGH;
     }
@@ -190,16 +190,16 @@
 //        recloop_int.fall(&recloop_isr);
 //        tone_pb.fall(tone_isr);
 //        recloop_out = LOW;          // make sure the recloop is OFF [its active HIGH]
-        wait_ms(100);
+        wait_us(100000);
         select_drv = select_save;   // recall the input select setting and write to output
-        wait(2);                    // let things settle a bit
+        wait_us(2000000);                    // let things settle a bit
         muteout = HIGH;             // enable output
         muteflag = TRUE;
         muteLED = HIGH;             // turn the mute indicator OFF
         standbyflag = TRUE;
         stby_pa = HIGH;             // now power up the amplifier
     }
-    wait_ms(500);                   // let things settle a bit
+    wait_us(500000);                   // let things settle a bit
     __enable_irq();
     stdby_int.fall(&stdby_isr);     // re-enable the standby interrupt
 
@@ -263,7 +263,7 @@
         muteLED = HIGH;
     }
 
-    wait_ms(100);
+    wait_us(100000);
 }
 
 
@@ -443,7 +443,7 @@
 {
 
     if (RCFLAG == FALSE) {  // if used R/C skip completely - extra safety check
-        wait_ms(5); // debounce - very short for the rotary encoder
+        wait_us(5000); // debounce - very short for the rotary encoder
         select = 0; // flush select
 
         select = (select | sela) <<1; // read the two port lines associated with the select rotary encoder
@@ -516,7 +516,7 @@
 /************************************ main() ***************************************/
 int main(void)
 {
-    Serial pc(USBTX, USBRX);
+//    Serial pc(USBTX, USBRX);
     __disable_irq();            // just to make sure we can set up correctly without problems
     stby_pa = LOW;              // make sure the power amp is OFF via the trigger output
     muteout = LOW;              //make sure the outputis muted from the get go
@@ -533,7 +533,7 @@
     stdby.mode(PullUp);         // pin 26
     //  recloop_in.mode(PullUp);    // pin 14
 
-    wait(.2);
+    wait_us(200000);
     FLAG1 = FALSE;
     FLAG2 = FALSE;
 //    FLAG5 = FALSE;              // this is the recloop flag
@@ -557,7 +557,7 @@
     standbyflag = FALSE;
     select_save = 2;                    // CD always slected on initital power up
     select_rot = select_save;          // CD will be selected when power is first turned on
-    wait(3);
+    wait_us(3000000);
 //    muteind = LOW;
     __enable_irq();