Revision 0:3ff58b093415, committed 2014-02-16

Comitter:

VivaPenguinos

Date:

Sun Feb 16 00:32:06 2014 +0000

Child:

1:24446776f0d2

Commit message:

DSKY Version 0.1

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Feb 16 00:32:06 2014 +0000
@@ -0,0 +1,136 @@
+/* Introduction
+Arduino DSKY
+This is a personal project used developed by penguinos to mix old school technology with a modern twist.
+Version 0.01: Feb. 4 2014
+    Switch platforms from Arduino to KL25Z by Freescale. Because of this, Revision number is resetted.
+    Major Revision to Code are being undertaken.
+
+Notable Credits:
+NASA! - Release of technical documentations regarding the AGC and DSKY
+Ron Burkley and Contributers of "Virtual AGC — AGS — LVDC — Gemini" - Providing Technical documentations, Source Code, explanations,
+    and refrences on other sites to make this project successful
+
+Warning: This may contain author crude language, random memes, and random thoughts.
+ */
+using namespace std;
+#include "mbed.h"
+
+//Declare Variables
+int shift = 0; // Shift Data
+// In the Arduino Version it uses a String. Will use an Int instead to see if this works on Mbed
+int Verb;
+int Noun;
+int Enter;
+int Set_GET_Seconds = 30; // Configure the Set Get in seconds. 1/100th of a second
+char Set_get_miliseconds = 10;
+char Set_Get_Seconds_Byte = 0;
+char Set_Get_Seconds_Byte2 = 0;
+char data = 0;
+char data2 = 0;
+char data3 = 0;
+char nibble[10] = // Holds variables for nibbles for number 0-9 in hexes. nibble ALL the things!
+    {0x00, 0x01, 0x02, 0x03, 0x04,
+     0x05, 0x06, 0x07, 0x08, 0x09};
+
+// Function Declaration
+void blinkAll(int amount, int delay);// Function that Blinks all LED
+//void ShiftingOut(char myDataOut);
+
+// Pin modes for each pins
+DigitalOut LatchPin(PTD4); //Pin for ST_CP of 74HC595 Pin # 12
+DigitalOut ClockPin(PTA12); //Pin for SH_CP of 74HC595 Pin # 11
+DigitalOut DataPin(PTA4);  //Pin for to DS of 74HC595 Pin # 14
+
+DigitalOut myled(LED1);
+Serial pc(USBTX, USBRX); // tx, rx Serial Output to PC Enabling this WILL consume resources. Use only for debug
+int main()
+{
+    wait(1);
+    pc.printf("Shifting");
+    blinkAll(4,1);
+    pc.printf("Done");
+    wait(1);
+    /*
+    //Serial pc(USBTX, USBRX); // tx, rx Serial Output to PC Enabling this WILL consume resources. Use only for debug
+    while(1) {
+        //pc.printf("on");
+        myled = 1;
+        wait(1);
+        //pc.printf("off");
+        myled = 0;
+        wait(1);   
+    }
+    */
+    return 0;
+}
+void compare(int Verb,int Noun, int Enter){
+    if (Verb == 16 && Noun == 36) {
+        //Configure GET
+        }
+    else if (Verb == 35 && Noun == 100) {
+        // Test Light
+        }
+    else if (Verb == 25 && Noun == 36) {
+        // Configure GET
+        }
+    else if (Verb == 37 && Enter == 00) {
+        // Idle Program
+        }
+    }
+
+void ShiftingOut(int myDataOut) {
+    // This shifts 8 bits out to the MSB first, The the rising edge of the clock, while clock idles low.
+    // Internal Fucntions
+    DataPin = 0;
+    ClockPin = 0;
+    int i= 0;
+    int pinState;
+    // Clears Everything within shift registers
+    DataPin = 0;
+    ClockPin = 0;
+    
+    for (i=7; i>= 0; i--) {
+        ClockPin = 0;
+        
+        // Value passed to my data out
+        if ( myDataOut & (1<<i)) {
+            pinState = 1;
+            myled = 1;
+            pc.printf("1");
+        }
+        else {
+            pinState = 0;
+            myled = 0;
+            pc.printf("0");
+        }
+        DataPin = pinState;
+        ClockPin = 1;
+        DataPin = 0;
+        }
+    ClockPin = 0;
+    DataPin = 1;
+    }
+
+//blinks the whole registered based on the number of times you want to blink with a certain delay 
+void blinkAll(int amount, int delay){
+    LatchPin = 0;
+    ShiftingOut(0);
+    ShiftingOut(0);
+    LatchPin = 1;
+    wait(0.2);
+    for (int x = 0; x < amount; x++) {
+        LatchPin = 0;
+        pc.printf("sending");
+        ShiftingOut(255);
+        ShiftingOut(255);
+        ShiftingOut(255);
+        LatchPin = 1;
+        wait(delay);
+        LatchPin = 0;
+        ShiftingOut(0);
+        ShiftingOut(0);
+        ShiftingOut(0);
+        LatchPin = 1;
+        wait(delay);
+        }
+    }
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Feb 16 00:32:06 2014 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/a9913a65894f
\ No newline at end of file