Revision 12:5fa2273de5db, committed 2013-07-24

Comitter:

emimon01

Date:

Wed Jul 24 11:11:21 2013 +0100

Parent:

11:f9e72c209510

Child:

13:bd9ff402dd42

Commit message:

Remove sources for toolchains unknown by the online compiler

Changed in this revision

--- a/vendor/Freescale/KL25Z/cmsis/GCC_CW_EWL/MKL25Z4.ld	Sun Jun 30 16:34:50 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,197 +0,0 @@
-/*
-*****************************************************************************
-**
-**  File        : KL25Z128M4_flash.ld
-**
-**  Default linker command file for Flash targets
-**
-*****************************************************************************
-*/
-/* Entry Point */
-ENTRY(__thumb_startup)
-
-/* Highest address of the user mode stack */
-_estack = 0x20003000;    /* end of SRAM */
-__SP_INIT = _estack;
-
-/* Generate a link error if heap and stack don't fit into RAM */
-__heap_size = 0x400;				/* required amount of heap  */
-__stack_size = 0x400; 				/* required amount of stack */
-
-/* Specify the memory areas */
-MEMORY
-{
-  m_interrupts	(rx) : ORIGIN = 0x00000000, LENGTH = 0xC0
-  m_cfmprotrom 	(rx) : ORIGIN = 0x00000400, LENGTH = 0x10
-  m_text 		(rx) : ORIGIN = 0x00000800, LENGTH = 128K - 0x800
-  m_data 	   (rwx) : ORIGIN = 0x1FFFF000, LENGTH = 16K		/* SRAM */
-}
-
-		
-/* Define output sections */
-SECTIONS
-{
-  /* The startup code goes first into Flash */
-  .interrupts :
-  {
-	__vector_table = .;
-    . = ALIGN(4);
-    KEEP(*(.vectortable)) /* Startup code */
-    . = ALIGN(4);
-  } > m_interrupts
-  
-  .cfmprotect :
-  {
-    . = ALIGN(4);
-	KEEP(*(.cfmconfig))	/* Flash Configuration Field (FCF) */
-	. = ALIGN(4);
-  } > m_cfmprotrom
-
-  /* The program code and other data goes into Flash */
-  .text :
-  {
-    . = ALIGN(4);
-    *(.text)           /* .text sections (code) */
-    *(.text*)          /* .text* sections (code) */
-    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
-    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
-    *(.glue_7)         /* glue arm to thumb code */
-    *(.glue_7t)        /* glue thumb to arm code */
-    *(.eh_frame)
-
-    KEEP (*(.init))
-    KEEP (*(.fini))
-
-    . = ALIGN(4);
-    _etext = .;        /* define a global symbols at end of code */
-  } > m_text
-
-  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > m_text
-  .ARM : {
-    __exidx_start = .;
-      *(.ARM.exidx*)
-      __exidx_end = .;
-  } > m_text
-  
-  .ctors :
-  {
-    __CTOR_LIST__ = .;
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    __CTOR_END__ = .;
-  } > m_text  
-  .dtors :
-  {
-    __DTOR_LIST__ = .;
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    __DTOR_END__ = .;
-  } > m_text  
-
-  .preinit_array :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array*))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } > m_text
-  .init_array :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT(.init_array.*)))
-    KEEP (*(.init_array*))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } > m_text
-  .fini_array :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT(.fini_array.*)))
-    KEEP (*(.fini_array*))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-	
-	___ROM_AT = .;
-  } > m_text
-
-  /* reserve MTB memory at the beginning of m_data */
-  .mtb : /* MTB buffer address as defined by the hardware */
-  {
-    . = ALIGN(8);
-    _mtb_start = .;
-    KEEP(*(.mtb_buf)) /* need to KEEP Micro Trace Buffer as not referenced by application */
-    . = ALIGN(8);
-    _mtb_end = .;
-  } > m_data  
-
-  /* Initialized data sections goes into RAM, load LMA copy after code */
-  .data : AT(___ROM_AT)
-  {
-    . = ALIGN(4);
-    __sinit__ = .;
-    _sdata = .;        /* create a global symbol at data start */
-    *(.data)           /* .data sections */
-    *(.data*)          /* .data* sections */
-
-    . = ALIGN(4);
-    _edata = .;        /* define a global symbol at data end */
-  } > m_data
-  
-  ___data_size = _edata - _sdata;
-  
-  /* Uninitialized data section */
-  . = ALIGN(4);
-  .bss :
-  {
-    /* This is used by the startup in order to initialize the .bss section */
-    __START_BSS = .;
-	PROVIDE ( __bss_start__ = __START_BSS );
-    *(.bss)
-    *(.bss*)
-    *(COMMON)
-
-    . = ALIGN(4);
-    __END_BSS = .;
-	PROVIDE ( __bss_end__ = __END_BSS );
-  } > m_data
-
-  _romp_at = ___ROM_AT + SIZEOF(.data);
-  .romp : AT(_romp_at)
-  {
-	__S_romp = _romp_at;
-    LONG(___ROM_AT);
-    LONG(_sdata);
-    LONG(___data_size);
-    LONG(0);
-    LONG(0);
-    LONG(0);
-  } > m_data
- 
-  /* User_heap_stack section, used to check that there is enough RAM left */
-  ._user_heap_stack :
-  {
-    . = ALIGN(4);
-    PROVIDE ( end = . );
-    PROVIDE ( _end = . );
-	__heap_addr = .;
-    . = . + __heap_size;
-    . = . + __stack_size;
-    . = ALIGN(4);
-  } > m_data
-  
-  .ARM.attributes 0 : { *(.ARM.attributes) }
-}

--- a/vendor/Freescale/KL25Z/cmsis/GCC_CW_EWL/startup_MKL25Z4.c	Sun Jun 30 16:34:50 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,147 +0,0 @@
-#include <string.h>
-#include <stdlib.h>
-
-#include "cmsis.h"
-
-// Linker Script
-extern unsigned long _estack;
-extern char __S_romp[];
-
-extern char __START_BSS[];
-extern char __END_BSS[];
-
-// CRT0
-extern void __init_registers();
-extern void __copy_rom_sections_to_ram(void);
-extern void __call_static_initializers(void);
-extern void __init_user();
-
-// User/mbed Defined
-extern int main();
-extern void mbed_exit(int return_code);
-
-void _ExitProcess(int return_code) {
-    mbed_exit(return_code);
-}
-
-void __thumb_startup(void) {
-    // Setup registers
-    __init_registers();
-    
-    // Disable the Watchdog because it may reset the core before entering main().
-    SIM->COPC = 0x0;
-    
-    //  zero-fill the .bss section
-    memset(__START_BSS, 0, (__END_BSS - __START_BSS));
-    
-    if (__S_romp != 0L)
-        __copy_rom_sections_to_ram();
-    
-    //  call C++ static initializers
-    __call_static_initializers();
-    
-    // initializations before main, user specific
-    __init_user();
-    
-    exit(main());
-    
-    //  should never get here
-    while (1);
-}
-
-void Default_Handler() {
-    __asm("bkpt");
-}
-
-/* Weak definitions of handlers point to Default_Handler if not implemented */
-void NMI_Handler() __attribute__ ((weak, alias("Default_Handler")));
-void HardFault_Handler() __attribute__ ((weak, alias("Default_Handler")));
-void SVC_Handler() __attribute__ ((weak, alias("Default_Handler")));
-void PendSV_Handler() __attribute__ ((weak, alias("Default_Handler")));
-void SysTick_Handler() __attribute__ ((weak, alias("Default_Handler")));
-
-void DMA0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void DMA1_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void DMA2_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void DMA3_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void MCM_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void FTFL_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void PMC_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void LLW_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void I2C0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void I2C1_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void SPI0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void SPI1_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void UART0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void UART1_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void UART2_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void ADC0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void CMP0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void FTM0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void FTM1_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void FTM2_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void RTC_Alarm_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void RTC_Seconds_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void PIT_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void USBOTG_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void DAC0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void TSI0_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void MCG_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void LPTimer_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void PORTA_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-void PORTD_IRQHandler() __attribute__ ((weak, alias("Default_Handler")));
-
-/* The Interrupt Vector Table */
-void (* const InterruptVector[])() __attribute__ ((section(".vectortable"))) = {
-    /* Processor exceptions */
-    (void(*)(void)) &_estack,
-    __thumb_startup,
-    NMI_Handler,
-    HardFault_Handler,
-    0,
-    0,
-    0,
-    0,
-    0,
-    0,
-    0,
-    SVC_Handler,
-    0,
-    0,
-    PendSV_Handler,
-    SysTick_Handler,
-
-    /* Interrupts */
-    DMA0_IRQHandler, /* DMA Channel 0 Transfer Complete and Error */
-    DMA1_IRQHandler, /* DMA Channel 1 Transfer Complete and Error */
-    DMA2_IRQHandler, /* DMA Channel 2 Transfer Complete and Error */
-    DMA3_IRQHandler, /* DMA Channel 3 Transfer Complete and Error */
-    MCM_IRQHandler, /* Normal Interrupt */
-    FTFL_IRQHandler, /* FTFL Interrupt */
-    PMC_IRQHandler, /* PMC Interrupt */
-    LLW_IRQHandler, /* Low Leakage Wake-up */
-    I2C0_IRQHandler, /* I2C0 interrupt */
-    I2C1_IRQHandler, /* I2C1 interrupt */
-    SPI0_IRQHandler, /* SPI0 Interrupt */
-    SPI1_IRQHandler, /* SPI1 Interrupt */
-    UART0_IRQHandler, /* UART0 Status and Error interrupt */
-    UART1_IRQHandler, /* UART1 Status and Error interrupt */
-    UART2_IRQHandler, /* UART2 Status and Error interrupt */
-    ADC0_IRQHandler, /* ADC0 interrupt */
-    CMP0_IRQHandler, /* CMP0 interrupt */
-    FTM0_IRQHandler, /* FTM0 fault, overflow and channels interrupt */
-    FTM1_IRQHandler, /* FTM1 fault, overflow and channels interrupt */
-    FTM2_IRQHandler, /* FTM2 fault, overflow and channels interrupt */
-    RTC_Alarm_IRQHandler, /* RTC Alarm interrupt */
-    RTC_Seconds_IRQHandler, /* RTC Seconds interrupt */
-    PIT_IRQHandler, /* PIT timer all channels interrupt */
-    Default_Handler, /* Reserved interrupt 39/23 */
-    USBOTG_IRQHandler, /* USB interrupt */
-    DAC0_IRQHandler, /* DAC0 interrupt */
-    TSI0_IRQHandler, /* TSI0 Interrupt */
-    MCG_IRQHandler, /* MCG Interrupt */
-    LPTimer_IRQHandler, /* LPTimer interrupt */
-    Default_Handler, /* Reserved interrupt 45/29 */
-    PORTA_IRQHandler, /* Port A interrupt */
-    PORTD_IRQHandler /* Port D interrupt */
-};

--- a/vendor/Freescale/KL25Z/cmsis/GCC_CW_NEWLIB/MKL25Z4.ld	Sun Jun 30 16:34:50 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,153 +0,0 @@
-/* Linker script for mbed LPC1768 */
-
-/* Linker script to configure memory regions. */
-MEMORY
-{
-  FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 128K
-  RAM (rwx) : ORIGIN = 0x1FFFF0C0, LENGTH = 0x3F40
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- *   Reset_Handler : Entry of reset handler
- * 
- * It defines following symbols, which code can use without definition:
- *   __exidx_start
- *   __exidx_end
- *   __etext
- *   __data_start__
- *   __preinit_array_start
- *   __preinit_array_end
- *   __init_array_start
- *   __init_array_end
- *   __fini_array_start
- *   __fini_array_end
- *   __data_end__
- *   __bss_start__
- *   __bss_end__
- *   __end__
- *   end
- *   __HeapLimit
- *   __StackLimit
- *   __StackTop
- *   __stack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
-    .text :
-    {
-        KEEP(*(.isr_vector))
-        *(.text.Reset_Handler)
-        *(.text.SystemInit)
-        
-        /* Only vectors and code running at reset are safe to be in first 512
-           bytes since RAM can be mapped into this area for RAM based interrupt
-           vectors. */
-        . = 0x00000200;
-        *(.text*)
-
-        KEEP(*(.init))
-        KEEP(*(.fini))
-
-        /* .ctors */
-        *crtbegin.o(.ctors)
-        *crtbegin?.o(.ctors)
-        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
-        *(SORT(.ctors.*))
-        *(.ctors)
-
-        /* .dtors */
-        *crtbegin.o(.dtors)
-        *crtbegin?.o(.dtors)
-        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
-        *(SORT(.dtors.*))
-        *(.dtors)
-
-        *(.rodata*)
-
-        KEEP(*(.eh_frame*))
-    } > FLASH
-
-    .ARM.extab : 
-    {
-        *(.ARM.extab* .gnu.linkonce.armextab.*)
-    } > FLASH
-
-    __exidx_start = .;
-    .ARM.exidx :
-    {
-        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
-    } > FLASH
-    __exidx_end = .;
-
-    __etext = .;
-        
-    .data : AT (__etext)
-    {
-        __data_start__ = .;
-        *(vtable)
-        *(.data*)
-
-        . = ALIGN(4);
-        /* preinit data */
-        PROVIDE (__preinit_array_start = .);
-        KEEP(*(.preinit_array))
-        PROVIDE (__preinit_array_end = .);
-
-        . = ALIGN(4);
-        /* init data */
-        PROVIDE (__init_array_start = .);
-        KEEP(*(SORT(.init_array.*)))
-        KEEP(*(.init_array))
-        PROVIDE (__init_array_end = .);
-
-
-        . = ALIGN(4);
-        /* finit data */
-        PROVIDE (__fini_array_start = .);
-        KEEP(*(SORT(.fini_array.*)))
-        KEEP(*(.fini_array))
-        PROVIDE (__fini_array_end = .);
-
-        . = ALIGN(4);
-        /* All data end */
-        __data_end__ = .;
-
-    } > RAM
-
-    .bss :
-    {
-        __bss_start__ = .;
-        *(.bss*)
-        *(COMMON)
-        __bss_end__ = .;
-    } > RAM
-    
-    .heap :
-    {
-        __end__ = .;
-        end = __end__;
-        *(.heap*)
-        __HeapLimit = .;
-    } > RAM
-
-    /* .stack_dummy section doesn't contains any symbols. It is only
-     * used for linker to calculate size of stack sections, and assign
-     * values to stack symbols later */
-    .stack_dummy :
-    {
-        *(.stack)
-    } > RAM
-
-    /* Set stack top to end of RAM, and stack limit move down by
-     * size of stack_dummy section */
-    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
-    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
-    PROVIDE(__stack = __StackTop);
-    
-    /* Check if data + heap + stack exceeds RAM limit */
-    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}

--- a/vendor/Freescale/KL25Z/cmsis/GCC_CW_NEWLIB/startup_MKL25Z4.s	Sun Jun 30 16:34:50 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,226 +0,0 @@
-/* File: startup_ARMCM0.S
- * Purpose: startup file for Cortex-M0 devices. Should use with 
- *   GCC for ARM Embedded Processors
- * Version: V1.2
- * Date: 15 Nov 2011
- * 
- * Copyright (c) 2011, ARM Limited
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in the
-      documentation and/or other materials provided with the distribution.
-    * Neither the name of the ARM Limited nor the
-      names of its contributors may be used to endorse or promote products
-      derived from this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-    .syntax unified
-    .arch armv6-m
-
-/* Memory Model
-   The HEAP starts at the end of the DATA section and grows upward.
-   
-   The STACK starts at the end of the RAM and grows downward.
-   
-   The HEAP and stack STACK are only checked at compile time:
-   (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE
-   
-   This is just a check for the bare minimum for the Heap+Stack area before
-   aborting compilation, it is not the run time limit:
-   Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100
- */
-    .section .stack
-    .align 3
-#ifdef __STACK_SIZE
-    .equ    Stack_Size, __STACK_SIZE
-#else
-    .equ    Stack_Size, 0x80
-#endif
-    .globl    __StackTop
-    .globl    __StackLimit
-__StackLimit:
-    .space    Stack_Size
-    .size __StackLimit, . - __StackLimit
-__StackTop:
-    .size __StackTop, . - __StackTop
-
-    .section .heap
-    .align 3
-#ifdef __HEAP_SIZE
-    .equ    Heap_Size, __HEAP_SIZE
-#else
-    .equ    Heap_Size, 0x80
-#endif
-    .globl    __HeapBase
-    .globl    __HeapLimit
-__HeapBase:
-    .space    Heap_Size
-    .size __HeapBase, . - __HeapBase
-__HeapLimit:
-    .size __HeapLimit, . - __HeapLimit
-    
-    .section .isr_vector
-    .align 2
-    .globl __isr_vector
-__isr_vector:
-    .long    __StackTop            /* Top of Stack */
-    .long    Reset_Handler         /* Reset Handler */
-    .long    NMI_Handler           /* NMI Handler */
-    .long    HardFault_Handler     /* Hard Fault Handler */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    SVC_Handler           /* SVCall Handler */
-    .long    0                     /* Reserved */
-    .long    0                     /* Reserved */
-    .long    PendSV_Handler        /* PendSV Handler */
-    .long    SysTick_Handler       /* SysTick Handler */
-
-    /* External interrupts */
-    .long   DMA0_IRQHandler         /* DMA channel 0 transfer complete interrupt */
-    .long   DMA1_IRQHandler         /* DMA channel 1 transfer complete interrupt */
-    .long   DMA2_IRQHandler         /* DMA channel 2 transfer complete interrupt */
-    .long   DMA3_IRQHandler         /* DMA channel 3 transfer complete interrupt */
-    .long   Reserved20_IRQHandler   /* Reserved interrupt 20 */
-    .long   FTFA_IRQHandler         /* FTFA interrupt */
-    .long   LVD_LVW_IRQHandler      /* Low Voltage Detect, Low Voltage Warning */
-    .long   LLW_IRQHandler          /* Low Leakage Wakeup */
-    .long   I2C0_IRQHandler         /* I2C0 interrupt */
-    .long   I2C1_IRQHandler         /* I2C0 interrupt 25 */
-    .long   SPI0_IRQHandler         /* SPI0 interrupt */
-    .long   SPI1_IRQHandler         /* SPI1 interrupt */
-    .long   UART0_IRQHandler        /* UART0 status/error interrupt */
-    .long   UART1_IRQHandler        /* UART1 status/error interrupt */
-    .long   UART2_IRQHandler        /* UART2 status/error interrupt */
-    .long   ADC0_IRQHandler         /* ADC0 interrupt */
-    .long   CMP0_IRQHandler         /* CMP0 interrupt */
-    .long   TPM0_IRQHandler         /* TPM0 fault, overflow and channels interrupt */
-    .long   TPM1_IRQHandler         /* TPM1 fault, overflow and channels interrupt */
-    .long   TPM2_IRQHandler         /* TPM2 fault, overflow and channels interrupt */
-    .long   RTC_IRQHandler          /* RTC interrupt */
-    .long   RTC_Seconds_IRQHandler  /* RTC seconds interrupt */
-    .long   PIT_IRQHandler          /* PIT timer interrupt */
-    .long   Reserved39_IRQHandler   /* Reserved interrupt 39 */
-    .long   USB0_IRQHandler         /* USB0 interrupt */
-    .long   DAC0_IRQHandler         /* DAC interrupt */
-    .long   TSI0_IRQHandler         /* TSI0 interrupt */
-    .long   MCG_IRQHandler          /* MCG interrupt */
-    .long   LPTimer_IRQHandler      /* LPTimer interrupt */
-    .long   Reserved45_IRQHandler   /* Reserved interrupt 45 */
-    .long   PORTA_IRQHandler        /* Port A interrupt */
-    .long   PORTD_IRQHandler        /* Port D interrupt */
-    
-    .size    __isr_vector, . - __isr_vector
-
-    .section .text.Reset_Handler
-    .thumb
-    .thumb_func
-    .align 2
-    .globl    Reset_Handler
-    .type    Reset_Handler, %function
-Reset_Handler:
-/*     Loop to copy data from read only memory to RAM. The ranges
- *      of copy from/to are specified by following symbols evaluated in 
- *      linker script.
- *      __etext: End of code section, i.e., begin of data sections to copy from.
- *      __data_start__/__data_end__: RAM address range that data should be
- *      copied to. Both must be aligned to 4 bytes boundary.  */
-
-    ldr    r1, =__etext
-    ldr    r2, =__data_start__
-    ldr    r3, =__data_end__
-
-    subs    r3, r2
-    ble    .flash_to_ram_loop_end
-
-    movs    r4, 0
-.flash_to_ram_loop:
-    ldr    r0, [r1,r4]
-    str    r0, [r2,r4]
-    adds    r4, 4
-    cmp    r4, r3
-    blt    .flash_to_ram_loop
-.flash_to_ram_loop_end:
-
-    ldr    r0, =SystemInit
-    blx    r0
-    ldr    r0, =_start
-    bx    r0
-    .pool
-    .size Reset_Handler, . - Reset_Handler
-    
-    .text
-/*    Macro to define default handlers. Default handler
- *    will be weak symbol and just dead loops. They can be
- *    overwritten by other handlers */
-    .macro    def_default_handler    handler_name
-    .align 1
-    .thumb_func
-    .weak    \handler_name
-    .type    \handler_name, %function
-\handler_name :
-    b    .
-    .size    \handler_name, . - \handler_name
-    .endm
-    
-    def_default_handler     NMI_Handler
-    def_default_handler     HardFault_Handler
-    def_default_handler     SVC_Handler
-    def_default_handler     PendSV_Handler
-    def_default_handler     SysTick_Handler
-    def_default_handler     DMA0_IRQHandler
-    def_default_handler     DMA1_IRQHandler
-    def_default_handler     DMA2_IRQHandler
-    def_default_handler     DMA3_IRQHandler
-    def_default_handler     Reserved20_IRQHandler
-    def_default_handler     FTFA_IRQHandler
-    def_default_handler     LVD_LVW_IRQHandler
-    def_default_handler     LLW_IRQHandler
-    def_default_handler     I2C0_IRQHandler
-    def_default_handler     I2C1_IRQHandler
-    def_default_handler     SPI0_IRQHandler
-    def_default_handler     SPI1_IRQHandler
-    def_default_handler     UART0_IRQHandler
-    def_default_handler     UART1_IRQHandler
-    def_default_handler     UART2_IRQHandler
-    def_default_handler     ADC0_IRQHandler
-    def_default_handler     CMP0_IRQHandler
-    def_default_handler     TPM0_IRQHandler
-    def_default_handler     TPM1_IRQHandler
-    def_default_handler     TPM2_IRQHandler
-    def_default_handler     RTC_IRQHandler
-    def_default_handler     RTC_Seconds_IRQHandler
-    def_default_handler     PIT_IRQHandler
-    def_default_handler     Reserved39_IRQHandler
-    def_default_handler     USB0_IRQHandler
-    def_default_handler     DAC0_IRQHandler
-    def_default_handler     TSI0_IRQHandler
-    def_default_handler     MCG_IRQHandler
-    def_default_handler     LPTimer_IRQHandler
-    def_default_handler     Reserved45_IRQHandler
-    def_default_handler     PORTA_IRQHandler
-    def_default_handler     PORTD_IRQHandler
-
-    .weak    DEF_IRQHandler
-    .set    DEF_IRQHandler, Default_Handler
-
-    .end