Ben Schueler / Mbed 2 deprecated UDPSocket_Node

this program can by compiled and run on several mbeds in a network. The mbed ID is automatically generated. This program is a small test to see if it works. To test the firmware you will need two ( or more ) mbed modules connected to the same network. Pin p5 should be connected with a push button to 3v3 and a resistor of 10k to ground. If the button is pressed the mbed will broadcast a message on ip 239, 192, 1, 100 on port 50000. All mbeds are listening to this ip address and port so they will pick up this message. If the message says MBED xyz LED ON, led1 will id on. If the message says MBED LED OFF, led1 will be off. It\\\'s that simple. So with one mbed you can turn the other mbeds led on or off.

Dependencies:   EthernetNetIf NTPClient_NetServices mbed

Files at this revision

API Documentation at this revision

Revision 2:ae37f80efd23, committed 2010-11-24

Comitter:
Schueler
Date:
Wed Nov 24 23:46:38 2010 +0000
Parent:
1:2e2d0b0b57e0
Child:
3:3c33a398189e
Commit message:
0.03
Debug info improved.
Send message to client ID

Changed in this revision

UDPSocketExample.cpp Show annotated file Show diff for this revision Revisions of this file 
--- a/UDPSocketExample.cpp	Wed Nov 24 23:32:52 2010 +0000
+++ b/UDPSocketExample.cpp	Wed Nov 24 23:46:38 2010 +0000
@@ -13,14 +13,13 @@
 //
 // Message to let the other know we are alive
 char strAlive[15];
-// Address other MBED to turn on the LED
-const char* strON  = "MBED yyy LED ON  \0";
-const char* strOFF = "MBED yyy LED OFF \0";
+
 char mebed_list[16];
 
 char ButtonPressed = 0;
 char SendAlive = 0;
 char mbed_id = 0;
+char mbed_client = 0;
 
 void Alive()         // ticker routine
 {
@@ -51,18 +50,18 @@
         {
             //pc.printf ("message from %d.%d.%d.%d: %s\n", host.getIp()[0], host.getIp()[1], host.getIp()[2], host.getIp()[3], buf );
 
-            int mbed_client = 0;
+            mbed_client = 0;
             for ( int i = 5; i < 8; i++ )
             {
                 if ( ( buf[i] >= '0' ) & ( buf[i] <= '9' ) ) { mbed_client *=10; mbed_client += ( buf[i] - '0' ); }
             }
             if ( strstr (buf, "ALIVE") != NULL )
             {
-                pc.printf ("MBED %d is alive\n", mbed_client );
+                pc.printf ("MBED %d is alive\n\r", mbed_client );
             }
             if ( strstr (buf, "LED") != NULL )
             {
-                pc.printf ("MBED %d send a message\n", mbed_client );
+                pc.printf ("Message for MBED %d\n\r", mbed_client );
                 if ( strstr (buf, "ON")  != NULL ) { led = 1; }
                 if ( strstr (buf, "OFF") != NULL ) { led = 0; }
             }
@@ -85,7 +84,9 @@
   pc.printf("  OK\n\r");
 
   IpAddr ethIp = eth.getIp();
-  sprintf( strAlive, "MBED %d ALIVE\0", ethIp[3] );
+  mbed_id = ethIp[3];
+  sprintf( strAlive, "MBED %d ALIVE\0", mbed_id );
+
   pc.printf( "%s\n\r", strAlive );
   // set Alive Broadcast to 10 seconds
   AliveTicker.attach(&Alive, 10);  
@@ -107,7 +108,7 @@
     {
       char strout[20];
       pos = !pos;
-      if ( pos == 0 ) strncpy( strout, strOFF, 17 ); else strncpy( strout, strON, 17 );
+      if ( pos == 0 ) sprintf( strout, "MBED %d LED OFF\0", mbed_client ); else sprintf( strout, "MBED %d LED ON\0", mbed_client );
       udp.sendto( strout, strlen(strout), &multicast );
       //pc.printf("%s\n", str);
       ButtonPressed = 0;