Revision 4:d0b32a4209f0, committed 2016-12-03

Comitter:

RahulSitaram

Date:

Sat Dec 03 07:16:13 2016 +0000

Parent:

3:272d0276d474

Commit message:

Shift registers - SIPO and PISO

Changed in this revision

--- a/arduino.c	Thu Dec 20 23:00:25 2012 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,238 +0,0 @@
-/**
- * @section LICENSE
- *  Copyright (c) 2012
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * @section DESCRIPTION
- *  This is a library for allowing the use of programs written for the Arduino
- *  with the mbed. This was started for use with the Gameduino shield Library.
- *  It is currently uncomplete and not fully tested, but I don't see myself spending time on it. 
- *  See TODOs and check http://arduino.cc/en/Reference/HomePage for missing parts
- *
- * @file arduino.c
- *
- * Example:
- * @code
- * 
- * #include "mbed.h"
- * #include "arduino.h"
- * 
- * void setup(){
- * // setup code
- * }
- *
- *void loop(){
- * // loop code
- *}
- *
- * int main() {
- *   timer_start();
- *   setup();
- *   while(1) {
- *       loop();
- *   }
- * }
- * @endcode
- */
- #include "arduino.h"
-
-/*****************************************************  
-  Digital I/O
-
-    pinMode()- TODO
-    digitalWrite()- TODO
-    digitalRead()- TODO
-    
-******************************************************/
-
-/*****************************************************  
-  Analog I/O
-
-    analogReference() - TODO
-    analogRead() - TODO
-    analogWrite()-(PWM) - TODO
-    
-*****************************************************/
-
-/*****************************************************
-  Advanced I/O
-
-    tone() - TODO
-    noTone() - TODO
-    shiftOut() - TODO
-    shiftIn() - TODO
-    pulseIn() - TODO
-    
-*****************************************************/ 
-
-/*****************************************************  
-  Time
-    
-    millis() - need to start timer first
-    micros() - need to start timer first
-    delay() - done by Macro
-    delayMicroseconds() - Done byMacro
-    
-*****************************************************/
-
-Timer arduino_timer;
-/** start the arduino_timer timer for millis() and micros() running.
- *
- * @param void
- */
-void timer_start(void) {
-    arduino_timer.start();
-}
-/** return a long for the amount of time since the timer was started in milliseconds.
- *
- * @param void
- */
-long millis(void) {
-    return arduino_timer.read_ms();
-}
-/** return a long for the amount of time since the timer was started in microseconds.
- *
- * @param void
- */
-long micros(void) {
-    return arduino_timer.read_us();
-}
-
-
-/*****************************************************
-  Maths
- 
-    min()  - done by Macro
-    max()  - done by Macro
-    abs()  - done by Macro
-    constrain() - TODO
-    map() - TODO
-    pow() - implemented by including math.h
-    sqrt() - implemented by including math.h
-    
-*****************************************************/
-
-
-/*****************************************************
-  Trigonometry
-
-    sin() - implemented by including math.h
-    cos() - implemented by including math.h
-    tan() - implemented by including math.h
-    
-*****************************************************/
-
-/*****************************************************
-  Random Numbers
-
-    randomSeed()  - done by Macro
-    random() - function below
-    
-*****************************************************/
-
-/** generates a random number from 0 to defined number
- *
- * @param number maximum value for random number
- */
-int random(int number) {
-    return (rand()%number);
-}
-/** generates a random number between two numbers
- *
- * @param numberone minimum value for random number
- * @param numbertwo maximum value for random number
- */
-int random(int numberone, int numbertwo) {
-    int random = 0;
-    if ((numberone < 0) && (numbertwo < 0)) {
-        numberone = numberone * -1;
-        numbertwo = numbertwo * -1;
-        random = -1 * (rand()%(numberone + numbertwo));
-    }
-    if ((numbertwo < 0) && (numberone >= 0)) {
-        numbertwo = numbertwo * -1;
-        random = (rand()%(numberone + numbertwo)) - numbertwo;
-    }
-    if ((numberone < 0) && (numbertwo >= 0)) {
-        numberone = numberone * -1;
-        random = (rand()%(numberone + numbertwo)) - numberone;
-    } else {
-        random = (rand()%(numberone + numbertwo)) - min(numberone, numbertwo);
-    }
-    return random;
-}
-
-/*****************************************************
-  Bits and Bytes
-     
-     lowByte() - function below
-     highByte() - function below
-     bitRead() - TODO
-     bitWrite() - TODO
-     bitSet() - TODO
-     bitClear() - TODO
-     bit() - TODO
-     
-*****************************************************/
-
-/** returns the lower nibble of first byte
- *
- * @param high byte of which the high nibble is required
- */
-byte lowByte(short int low) {
-    byte bytelow = 0;
-    bytelow = (low & 0xFF);
-    return bytelow;
-}
-/** returns the higher nibble of first byte
- *
- * @param high byte of which the high nibble is required
- */
-byte highByte(short int high) {
-    byte bytehigh = 0;
-    bytehigh = ((high >> 8) & 0xFF);
-    return bytehigh;
-}
-
-
-
-/*****************************************************
-  External Interrupts
-    
-    attachInterrupt() - TODO
-    detachInterrupt() - TODO
-    
-*****************************************************/
-    
-/*****************************************************
-  Interrupts
-
-    interrupts() - TODO
-    noInterrupts() - TODO
-    
-*****************************************************/
-
-/*****************************************************
-  Communication
-
-    Serial - TODO
-    Stream - TODO
-    
-*****************************************************/
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/arduino.cpp	Sat Dec 03 07:16:13 2016 +0000
@@ -0,0 +1,238 @@
+/**
+ * @section LICENSE
+ *  Copyright (c) 2012
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * @section DESCRIPTION
+ *  This is a library for allowing the use of programs written for the Arduino
+ *  with the mbed. This was started for use with the Gameduino shield Library.
+ *  It is currently uncomplete and not fully tested, but I don't see myself spending time on it. 
+ *  See TODOs and check http://arduino.cc/en/Reference/HomePage for missing parts
+ *
+ * @file arduino.c
+ *
+ * Example:
+ * @code
+ * 
+ * #include "mbed.h"
+ * #include "arduino.h"
+ * 
+ * void setup(){
+ * // setup code
+ * }
+ *
+ *void loop(){
+ * // loop code
+ *}
+ *
+ * int main() {
+ *   timer_start();
+ *   setup();
+ *   while(1) {
+ *       loop();
+ *   }
+ * }
+ * @endcode
+ */
+ #include "arduino.h"
+
+/*****************************************************  
+  Digital I/O
+
+    pinMode()- TODO
+    digitalWrite()- TODO
+    digitalRead()- TODO
+    
+******************************************************/
+
+/*****************************************************  
+  Analog I/O
+
+    analogReference() - TODO
+    analogRead() - TODO
+    analogWrite()-(PWM) - TODO
+    
+*****************************************************/
+
+/*****************************************************
+  Advanced I/O
+
+    tone() - TODO
+    noTone() - TODO
+    shiftOut() - TODO
+    shiftIn() - TODO
+    pulseIn() - TODO
+    
+*****************************************************/ 
+
+/*****************************************************  
+  Time
+    
+    millis() - need to start timer first
+    micros() - need to start timer first
+    delay() - done by Macro
+    delayMicroseconds() - Done byMacro
+    
+*****************************************************/
+
+Timer arduino_timer;
+/** start the arduino_timer timer for millis() and micros() running.
+ *
+ * @param void
+ */
+void timer_start(void) {
+    arduino_timer.start();
+}
+/** return a long for the amount of time since the timer was started in milliseconds.
+ *
+ * @param void
+ */
+long millis(void) {
+    return arduino_timer.read_ms();
+}
+/** return a long for the amount of time since the timer was started in microseconds.
+ *
+ * @param void
+ */
+long micros(void) {
+    return arduino_timer.read_us();
+}
+
+
+/*****************************************************
+  Maths
+ 
+    min()  - done by Macro
+    max()  - done by Macro
+    abs()  - done by Macro
+    constrain() - TODO
+    map() - TODO
+    pow() - implemented by including math.h
+    sqrt() - implemented by including math.h
+    
+*****************************************************/
+
+
+/*****************************************************
+  Trigonometry
+
+    sin() - implemented by including math.h
+    cos() - implemented by including math.h
+    tan() - implemented by including math.h
+    
+*****************************************************/
+
+/*****************************************************
+  Random Numbers
+
+    randomSeed()  - done by Macro
+    random() - function below
+    
+*****************************************************/
+
+/** generates a random number from 0 to defined number
+ *
+ * @param number maximum value for random number
+ */
+int random(int number) {
+    return (rand()%number);
+}
+/** generates a random number between two numbers
+ *
+ * @param numberone minimum value for random number
+ * @param numbertwo maximum value for random number
+ */
+int random(int numberone, int numbertwo) {
+    int random = 0;
+    if ((numberone < 0) && (numbertwo < 0)) {
+        numberone = numberone * -1;
+        numbertwo = numbertwo * -1;
+        random = -1 * (rand()%(numberone + numbertwo));
+    }
+    if ((numbertwo < 0) && (numberone >= 0)) {
+        numbertwo = numbertwo * -1;
+        random = (rand()%(numberone + numbertwo)) - numbertwo;
+    }
+    if ((numberone < 0) && (numbertwo >= 0)) {
+        numberone = numberone * -1;
+        random = (rand()%(numberone + numbertwo)) - numberone;
+    } else {
+        random = (rand()%(numberone + numbertwo)) - min(numberone, numbertwo);
+    }
+    return random;
+}
+
+/*****************************************************
+  Bits and Bytes
+     
+     lowByte() - function below
+     highByte() - function below
+     bitRead() - TODO
+     bitWrite() - TODO
+     bitSet() - TODO
+     bitClear() - TODO
+     bit() - TODO
+     
+*****************************************************/
+
+/** returns the lower nibble of first byte
+ *
+ * @param high byte of which the high nibble is required
+ */
+byte lowByte(short int low) {
+    byte bytelow = 0;
+    bytelow = (low & 0xFF);
+    return bytelow;
+}
+/** returns the higher nibble of first byte
+ *
+ * @param high byte of which the high nibble is required
+ */
+byte highByte(short int high) {
+    byte bytehigh = 0;
+    bytehigh = ((high >> 8) & 0xFF);
+    return bytehigh;
+}
+
+
+
+/*****************************************************
+  External Interrupts
+    
+    attachInterrupt() - TODO
+    detachInterrupt() - TODO
+    
+*****************************************************/
+    
+/*****************************************************
+  Interrupts
+
+    interrupts() - TODO
+    noInterrupts() - TODO
+    
+*****************************************************/
+
+/*****************************************************
+  Communication
+
+    Serial - TODO
+    Stream - TODO
+    
+*****************************************************/
\ No newline at end of file