![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Initial Publish Leaning GPS/SDCARD
Dependencies: FileManager GPSGms6 SDFileSystem mbed
Fork of 2545_SD_Card by
Revision 0:5448330e1a33, committed 2016-03-11
- Comitter:
- eencae
- Date:
- Fri Mar 11 16:07:41 2016 +0000
- Child:
- 1:f911149acd35
- Commit message:
- Initial commit.
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SDFileSystem.lib Fri Mar 11 16:07:41 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/SDFileSystem/#7b35d1709458
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Fri Mar 11 16:07:41 2016 +0000 @@ -0,0 +1,173 @@ +/* 2545_SD_Card Example + +Example of writing data to SD card. + +Based on FTF2014_lab4 Example + +https://developer.mbed.org/teams/Freescale/wiki/FTF2014_workshop + +Craig A. Evans, University of Leeds, Mar 2016 + +*/ + +#include "mbed.h" +#include "SDFileSystem.h" + +// Connections to SD card holder on K64F (SPI interface) +SDFileSystem sd(PTE3, PTE1, PTE2, PTE4, "sd"); // MOSI, MISO, SCK, CS +Serial serial(USBTX, USBRX); // for PC debug + +void delete_file(char filename[]); + +int main() +{ + serial.baud(115200); // full-speed! + serial.printf("#### SD Card Example #####\n"); + FILE *fp; // this is our file pointer + wait(1); + + // Various examples below - can comment out ones you don't need + + /////////////////////// Deleting file example //////////////////////// + + // comment this line out if you don't want to delete the file! + delete_file("/sd/test.txt"); + + ////////////////////// Simple writing example ////////////////////////// + + // open file for writing ('w') - creates file if it doesn't exist and overwrites + // if it does. If you wish to add a score onto a list, then you can + // append instead 'a'. This will open the file if it exists and start + // writing at the end. It will create the file if it doesn't exist. + fp = fopen("/sd/topscore.txt", "w"); + int top_score = 56; // random example + + if (fp == NULL) { // if it can't open the file then print error message + serial.printf("Error! Unable to open file!\n"); + } else { // opened file so can write + serial.printf("Writing to file...."); + fprintf(fp, "%d",top_score); // ensure data type matches + serial.printf("Done.\n"); + fclose(fp); // ensure you close the file after writing + } + + ////////////////////// Simple reading example ////////////////////////// + + // now open file for reading + fp = fopen("/sd/topscore.txt", "r"); + int stored_top_score = -1; // -1 to demonstrate it has changed after reading + + if (fp == NULL) { // if it can't open the file then print error message + serial.printf("Error! Unable to open file!\n"); + } else { // opened file so can write + fscanf(fp, "%d",&stored_top_score); // ensure data type matches - note address operator (&) + serial.printf("Read %d from file.\n",stored_top_score); + fclose(fp); // ensure you close the file after reading + } + + ///////////////////// Writing list to file example ////////////////////// + + // for this example, I'll create some numbers to write to file in a big list + // a data logger for example will usually append to a file - at a reading + // at the end rather than creating a new file + fp = fopen("/sd/test.txt", "a"); + + if (fp == NULL) { // if it can't open the file then print error message + serial.printf("Error! Unable to open file!\n"); + } else { // opened file so can write + serial.printf("Writing to file...."); + for(int i = 1; i <= 50; i++) { + float dummy = 1000.0F/i; // dummy variable + fprintf(fp, "%d,%f\n",i,dummy); // print formatted string to file (CSV) + } + serial.printf("Done.\n"); + fclose(fp); // ensure you close the file after writing + } + + // you can comment out the writing example to check that the writing has + // worked - when you run it after commenting, it should still open the + // file that exists on the SD card - assuming you didn't delete it! + + /////////////////////// Reading from file example //////////////////////// + + // now open file for reading...note the 'r' + fp = fopen("/sd/test.txt", "r"); + if (fp == NULL) { // if it can't open the file then print error message + serial.printf("Error! Unable to open file!\n"); + } else { + serial.printf("Reading file....\n"); + int i; // create suitable variables to store the data in the file + float value; + + // in this example, we keep reading (using fscanf) until we reach + // the 'end of file'. Note we use the address operator & to write + // to the variables. Also the format of the string must match what + // is in the file + while (fscanf(fp, "%d,%f", &i, &value) != EOF) { + serial.printf("%d,%f\n",i,value); + } + serial.printf("Done.\n"); + fclose(fp); // ensure you close the file after reading + } + + ///////////////// Advanced Reading from file example /////////////////// + + // the previous example just read the values into variables and printed to + // serial, we'll now read files into an array. + + // now open file for reading...note the 'r' + fp = fopen("/sd/test.txt", "r"); + + int n=0; // going to store the number of lines in the file + int *index_array; // pointers to create dynamic arrays later + float *value_array; // note memory will be in heap rather than on the stack + + if (fp == NULL) { // if it can't open the file then print error message + serial.printf("Error! Unable to open file!\n"); + } else { + serial.printf("Counting lines in file....\n"); + //Since we may not know the + // number of lines in the files ahead of time, we'll first count them + // * means scan but don't save + while (fscanf(fp, "%*d,%*f") != EOF) { + n++; // increment counter when read a line + } + + + serial.printf("Read %d lines\n",n); + serial.printf("Creating dynamic arrays...\n"); + // calloc creates an array and initilises to 0 + // malloc returns unitialised array - diffrent syntax + index_array = (int *)calloc(n, sizeof (int)); + value_array = (float *)calloc(n, sizeof (float)); + + int i=0; + rewind(fp); // 'scrolled' to end of file, so go back to beginning + serial.printf("Reading into arrays...\n"); + while (fscanf(fp, "%d,%f",&index_array[i],&value_array[i]) != EOF) { + i++; // read data into array and increment index + } + serial.printf("Done.\n"); + fclose(fp); // ensure you close the file after reading + } + + // we should now have the data in the arrays, will print to serial to check + for(int i=0; i<n ; i++) { + serial.printf("[%d] %d,%f\n",i,index_array[i],value_array[i]); + } + + /////////////////////////////////////////////////// + serial.printf("End of SD card example\n"); +} + +void delete_file(char filename[]) +{ + serial.printf("Deleting file '%s'...",filename); + FILE *fp = fopen(filename, "r"); // try and open file + if (fp != NULL) { // if it does open... + fclose(fp); // close it + remove(filename); // and then delete + serial.printf("Done!\n"); + } + // if we can't open it, it doesn't exist and so we can't delete it +}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Fri Mar 11 16:07:41 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/87f2f5183dfb \ No newline at end of file