Jan Henrik
Lets the LED Blink thought red, green and blue. Speed can be controlled by the slider
Revision 0:88fd491a3a3d, committed 2014-09-09
- Comitter:
- JanHenrik
- Date:
- Tue Sep 09 15:35:48 2014 +0000
- Commit message:
- This programm will led the LED flash in 3 colors, speed is defined by the slider. it is an easy code and good for starters
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Tue Sep 09 15:35:48 2014 +0000
@@ -0,0 +1,48 @@
+#include "mbed.h"
+#include "tsi_sensor.h"
+
+int divisor = 10; //set divisor, for blinking speed
+float slider = 0; //we need that later
+
+/* This defines will be replaced by PinNames soon, it is needed to init the slider */
+#if defined (TARGET_KL25Z) || defined (TARGET_KL46Z)
+#define ELEC0 9
+#define ELEC1 10
+#elif defined (TARGET_KL05Z)
+#define ELEC0 9
+#define ELEC1 8
+#else
+#error TARGET NOT DEFINED
+#endif
+
+int main(void)
+{
+ TSIAnalogSlider tsi(ELEC0, ELEC1, 80); //init slider
+
+ PwmOut ledGreen(LED_GREEN); //init led pwm channels
+ PwmOut ledRed(LED_RED);
+ PwmOut ledBlue(LED_BLUE);
+
+ while (true) {
+
+ if(tsi.readPercentage() != 0) { //check if slider is tuched, if tuched slider != 0
+ slider = tsi.readPercentage()/divisor; //set slidervalue ( / divisor )
+ }
+
+ ledGreen = 1; //turn led´s on and off
+ ledRed = 0;
+ wait(slider); //wait defined speed (slidervalue)
+
+ ledRed = 1;
+ ledBlue = 0;
+ wait(slider);
+
+ ledBlue = 1;
+ ledGreen = 0;
+ wait(slider);
+
+
+ }
+}
+
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Tue Sep 09 15:35:48 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/9327015d4013 \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/tsi_sensor.lib Tue Sep 09 15:35:48 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Kojto/code/tsi_sensor/#f64097679f27