mille feuille
For LPC1114FN28
Dependencies: MCUGearALPC1114 TextLCD mbed
Revision 0:b107e3217731, committed 2014-05-03
- Comitter:
- Info
- Date:
- Sat May 03 16:59:33 2014 +0000
- Child:
- 1:fbea002af117
- Commit message:
- For LPC1114FN28
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MCUGearALPC1114.lib Sat May 03 16:59:33 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Info/code/MCUGearALPC1114/#95255bae41c8
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD.lib Sat May 03 16:59:33 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/simon/code/TextLCD/#308d188a2d3a
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat May 03 16:59:33 2014 +0000
@@ -0,0 +1,112 @@
+
+#include "mbed.h"
+#include "TextLCD.h"
+
+#include "MCUGearBaseA.h"
+#include "MCUGearA.h"
+#include "commonA.h"
+
+Serial pc(dp16, dp15); // tx, rx Set BaudRate = 115200 in main()
+
+void setIOUni(MCUGear *mcugear);
+void setIOLCD(MCUGear *mcugear);
+
+MCUGear UniM(dp5, dp27, N_VDD_VDD_VDD); //2 Connector Universal Module
+MCUGear LCDM(dp5, dp27, N_VDD_VSS_VSS); //LCD Module
+
+//output pins = P0_3, P0_7, P0_11, P1_0, P1_1, P1_2, P1_4, P1_5
+DigitalOut Dout1(dp26);
+DigitalOut Dout2(dp28);
+DigitalOut Dout3(dp4);
+DigitalOut Dout4(dp9);
+DigitalOut Dout5(dp10);
+DigitalOut Dout6(dp11);
+DigitalOut Dout7(dp14);
+DigitalOut Dout8(dp15);
+
+//inputpins = P1_8, P1_9
+DigitalIn Din1(dp17);
+DigitalIn Din2(dp18);
+
+int main() {
+
+ int sw1 = 0;
+ int sw2 = 0;
+ pc.printf("Hello World!\r\n");
+
+ wait(1);
+
+ initBase(); //initialize Baseboard
+
+ //set schematic select 0-7
+ UniM.detectModule(); //save location data in MCUGear class.
+ LCDM.detectModule(); //save location data in MCUGear class.
+
+ //startReg(0); //AutoMode can not use Bank
+ setIOUni(&UniM);//make schematic Bank0
+ setIOLCD(&LCDM);//make schematic Bank0
+ //endReg(0); //AutoMode can not use Bank
+
+ //changeBank(0);//select Bank
+
+
+ LCDM.connectModuleA();
+ TextLCD lcd(dp26, dp28, dp4, dp9, dp10, dp11, TextLCD::LCD16x2); // rs, e, d4-d7//set output pins from Dout1 to Dout6.
+ lcd.cls();
+ lcd.printf("Hello World!\n");
+ wait(1);
+ LCDM.disconnectModule();
+
+ while(1) {
+
+ UniM.connectModuleA();
+ sw1 = Din1.read();
+ sw2 = Din2.read();
+ printf("sw1 = %d sw2 = %d\r\n",sw1,sw2);
+ UniM.disconnectModule();
+
+ LCDM.connectModuleA();
+ lcd.printf(" "); //set IO as a neutral position
+ lcd.cls(); //clear LCD
+ lcd.printf("sw1 = %d\nsw2 = %d",sw1,sw2); //write LCD data
+ wait_ms(10); //delay for view the LCD
+ LCDM.disconnectModule();
+
+ UniM.connectModuleA();
+ Dout1 = 0;
+ Dout2 = 1;
+ Dout3 = 1;
+ wait(0.3);
+
+ Dout1 = 1;
+ Dout2 = 0;
+ Dout3 = 1;
+ wait(0.3);
+
+ Dout1 = 1;
+ Dout2 = 1;
+ Dout3 = 0;
+ wait(0.3);
+ UniM.disconnectModule();
+
+ }
+}
+
+
+void setIOUni(MCUGear *mcugear){
+ mcugear->setWireA(IOin1, IO_REG_IN_DIR, 0);
+ mcugear->setWireA(IOin2, IO_REG_IN_DIR, 1);
+ mcugear->setWireA(IOout1, IO_REG_OUT_DIR,2);
+ mcugear->setWireA(IOout2, IO_REG_OUT_DIR,3);
+ mcugear->setWireA(IOout3, IO_REG_OUT_DIR,4);
+}
+
+void setIOLCD(MCUGear *mcugear){
+ mcugear->setWireA(IOout1, IO_REG_OUT_DIR,0);
+ mcugear->setWireA(IOout2, IO_REG_OUT_DIR,1);
+ mcugear->setWireA(IOout3, IO_REG_OUT_DIR,2);
+ mcugear->setWireA(IOout4, IO_REG_OUT_DIR,3);
+ mcugear->setWireA(IOout5, IO_REG_OUT_DIR,4);
+ mcugear->setWireA(IOout6, IO_REG_OUT_DIR,5);
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sat May 03 16:59:33 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/6473597d706e \ No newline at end of file